Installation Instructions
*************************
-Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
-Inc.
+ Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software
+Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
Basic Installation
==================
- Briefly, the shell command `./configure && make && make install'
+ Briefly, the shell command './configure && make && make install'
should configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
+more-detailed instructions are generic; see the 'README' file for
instructions specific to this package. Some packages provide this
-`INSTALL' file but do not implement all of the features documented
+'INSTALL' file but do not implement all of the features documented
below. The lack of an optional feature in a given package is not
necessarily a bug. More recommendations for GNU packages can be found
in *note Makefile Conventions: (standards)Makefile Conventions.
- The `configure' shell script attempts to guess correct values for
+ The 'configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
+those values to create a 'Makefile' in each directory of the package.
+It may also create one or more '.h' files containing system-dependent
+definitions. Finally, it creates a shell script 'config.status' that
you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
+file 'config.log' containing compiler output (useful mainly for
+debugging 'configure').
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
+ It can also use an optional file (typically called 'config.cache' and
+enabled with '--cache-file=config.cache' or simply '-C') that saves the
+results of its tests to speed up reconfiguring. Caching is disabled by
+default to prevent problems with accidental use of stale cache files.
If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
+to figure out how 'configure' could check whether to do them, and mail
+diffs or instructions to the address given in the 'README' so they can
be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
+some point 'config.cache' contains results you don't want to keep, you
may remove or edit it.
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+ The file 'configure.ac' (or 'configure.in') is used to create
+'configure' by a program called 'autoconf'. You need 'configure.ac' if
+you want to change it or regenerate 'configure' using a newer version of
+'autoconf'.
The simplest way to compile this package is:
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
+ 1. 'cd' to the directory containing the package's source code and type
+ './configure' to configure the package for your system.
- Running `configure' might take a while. While running, it prints
+ Running 'configure' might take a while. While running, it prints
some messages telling which features it is checking for.
- 2. Type `make' to compile the package.
+ 2. Type 'make' to compile the package.
- 3. Optionally, type `make check' to run any self-tests that come with
+ 3. Optionally, type 'make check' to run any self-tests that come with
the package, generally using the just-built uninstalled binaries.
- 4. Type `make install' to install the programs and any data files and
+ 4. Type 'make install' to install the programs and any data files and
documentation. When installing into a prefix owned by root, it is
recommended that the package be configured and built as a regular
- user, and only the `make install' phase executed with root
+ user, and only the 'make install' phase executed with root
privileges.
- 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ 5. Optionally, type 'make installcheck' to repeat any self-tests, but
this time using the binaries in their final installed location.
This target does not install anything. Running this target as a
- regular user, particularly if the prior `make install' required
+ regular user, particularly if the prior 'make install' required
root privileges, verifies that the installation completed
correctly.
6. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
+ source code directory by typing 'make clean'. To also remove the
+ files that 'configure' created (so you can compile the package for
+ a different kind of computer), type 'make distclean'. There is
+ also a 'make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
- 7. Often, you can also type `make uninstall' to remove the installed
+ 7. Often, you can also type 'make uninstall' to remove the installed
files again. In practice, not all packages have tested that
uninstallation works correctly, even though it is required by the
GNU Coding Standards.
- 8. Some packages, particularly those that use Automake, provide `make
+ 8. Some packages, particularly those that use Automake, provide 'make
distcheck', which can by used by developers to test that all other
- targets like `make install' and `make uninstall' work correctly.
+ targets like 'make install' and 'make uninstall' work correctly.
This target is generally not run by end users.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
+the 'configure' script does not know about. Run './configure --help'
for details on some of the pertinent environment variables.
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
+ You can give 'configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here is
+an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
+own directory. To do this, you can use GNU 'make'. 'cd' to the
directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'. This
-is known as a "VPATH" build.
+the 'configure' script. 'configure' automatically checks for the source
+code in the directory that 'configure' is in and in '..'. This is known
+as a "VPATH" build.
- With a non-GNU `make', it is safer to compile the package for one
+ With a non-GNU 'make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
+installed the package for one architecture, use 'make distclean' before
reconfiguring for another architecture.
On MacOS X 10.5 and later systems, you can create libraries and
executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor. Like
+"universal" binaries--by specifying multiple '-arch' options to the
+compiler but only a single '-arch' option to the preprocessor. Like
this:
./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
This is not guaranteed to produce working output in all cases, you
may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
+using the 'lipo' tool if you have problems.
Installation Names
==================
- By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
+ By default, 'make install' installs the package's commands under
+'/usr/local/bin', include files under '/usr/local/include', etc. You
+can specify an installation prefix other than '/usr/local' by giving
+'configure' the option '--prefix=PREFIX', where PREFIX must be an
absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them. In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
+options like '--bindir=DIR' to specify different values for particular
+kinds of files. Run 'configure --help' for a list of the directories
+you can set and what kinds of files go in them. In general, the default
+for these options is expressed in terms of '${prefix}', so that
+specifying just '--prefix' will affect all of the other directory
specifications that were not explicitly provided.
The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
+correct locations to 'configure'; however, many packages provide one or
both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
+'make install' command line to change installation locations without
having to reconfigure or recompile.
The first method involves providing an override variable for each
-affected directory. For example, `make install
+affected directory. For example, 'make install
prefix=/alternate/directory' will choose an alternate location for all
directory configuration variables that were expressed in terms of
-`${prefix}'. Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated. The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
- The second method involves providing the `DESTDIR' variable. For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names. The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
+'${prefix}'. Any directories that were specified during 'configure',
+but not in terms of '${prefix}', must each be overridden at install time
+for the entire installation to be relocated. The approach of makefile
+variable overrides for each directory variable is required by the GNU
+Coding Standards, and ideally causes no recompilation. However, some
+platforms have known limitations with the semantics of shared libraries
+that end up requiring recompilation when using this method, particularly
+noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the 'DESTDIR' variable. For
+example, 'make install DESTDIR=/alternate/directory' will prepend
+'/alternate/directory' before all installation names. The approach of
+'DESTDIR' overrides is not required by the GNU Coding Standards, and
does not work on platforms that have drive letters. On the other hand,
it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
+when some directory options were not specified in terms of '${prefix}'
+at 'configure' time.
Optional Features
=================
If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
+with an extra prefix or suffix on their names by giving 'configure' the
+option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.
+
+ Some packages pay attention to '--enable-FEATURE' options to
+'configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to '--with-PACKAGE' options, where PACKAGE
+is something like 'gnu-as' or 'x' (for the X Window System). The
+'README' should mention any '--enable-' and '--with-' options that the
package recognizes.
- For packages that use the X Window System, `configure' can usually
+ For packages that use the X Window System, 'configure' can usually
find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
+you can use the 'configure' options '--x-includes=DIR' and
+'--x-libraries=DIR' to specify their locations.
Some packages offer the ability to configure how verbose the
-execution of `make' will be. For these packages, running `./configure
+execution of 'make' will be. For these packages, running './configure
--enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
+overridden with 'make V=1'; while running './configure
--disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
+overridden with 'make V=0'.
Particular systems
==================
- On HP-UX, the default C compiler is not ANSI C compatible. If GNU
-CC is not installed, it is recommended to use the following options in
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC
+is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
- HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved. Use GNU `make'
-instead.
+ HP-UX 'make' updates targets which have the same time stamps as their
+prerequisites, which makes it generally unusable when shipped generated
+files such as 'configure' are involved. Use GNU 'make' instead.
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file. The option `-nodtk' can be used as
-a workaround. If GNU CC is not installed, it is therefore recommended
-to try
+parse its '<wchar.h>' header file. The option '-nodtk' can be used as a
+workaround. If GNU CC is not installed, it is therefore recommended to
+try
./configure CC="cc"
./configure CC="cc -nodtk"
- On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+ On Solaris, don't put '/usr/ucb' early in your 'PATH'. This
directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
+these programs are available in '/usr/bin'. So, if you need '/usr/ucb'
+in your 'PATH', put it _after_ '/usr/bin'.
- On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'. It is recommended to use the following options:
+ On Haiku, software installed for all users goes in '/boot/common',
+not '/usr/local'. It is recommended to use the following options:
./configure --prefix=/boot/common
Specifying the System Type
==========================
- There may be some features `configure' cannot figure out
+ There may be some features 'configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
+_same_ architectures, 'configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
+'--build=TYPE' option. TYPE can either be a short name for the system
+type, such as 'sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
OS
KERNEL-OS
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
+ See the file 'config.sub' for the possible values of each field. If
+'config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
+use the option '--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
+eventually be run) with '--host=TYPE'.
Sharing Defaults
================
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
+ If you want to set default values for 'configure' scripts to share,
+you can create a site shell script called 'config.site' that gives
+default values for variables like 'CC', 'cache_file', and 'prefix'.
+'configure' looks for 'PREFIX/share/config.site' if it exists, then
+'PREFIX/etc/config.site' if it exists. Or, you can set the
+'CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all 'configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
+environment passed to 'configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
+them in the 'configure' command line, using 'VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
-causes the specified `gcc' to be used as the C compiler (unless it is
+causes the specified 'gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation. Until the limitation is lifted, you can use
-this workaround:
+Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
+Autoconf limitation. Until the limitation is lifted, you can use this
+workaround:
CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
-`configure' Invocation
+'configure' Invocation
======================
- `configure' recognizes the following options to control how it
+ 'configure' recognizes the following options to control how it
operates.
-`--help'
-`-h'
- Print a summary of all of the options to `configure', and exit.
+'--help'
+'-h'
+ Print a summary of all of the options to 'configure', and exit.
-`--help=short'
-`--help=recursive'
+'--help=short'
+'--help=recursive'
Print a summary of the options unique to this package's
- `configure', and exit. The `short' variant lists options used
- only in the top level, while the `recursive' variant lists options
- also present in any nested packages.
+ 'configure', and exit. The 'short' variant lists options used only
+ in the top level, while the 'recursive' variant lists options also
+ present in any nested packages.
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
+'--version'
+'-V'
+ Print the version of Autoconf used to generate the 'configure'
script, and exit.
-`--cache-file=FILE'
+'--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
+ traditionally 'config.cache'. FILE defaults to '/dev/null' to
disable caching.
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
+'--config-cache'
+'-C'
+ Alias for '--cache-file=config.cache'.
-`--quiet'
-`--silent'
-`-q'
+'--quiet'
+'--silent'
+'-q'
Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
+ suppress all normal output, redirect it to '/dev/null' (any error
messages will still be shown).
-`--srcdir=DIR'
+'--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
+ 'configure' can determine that directory automatically.
-`--prefix=DIR'
- Use DIR as the installation prefix. *note Installation Names::
- for more details, including other options available for fine-tuning
- the installation locations.
+'--prefix=DIR'
+ Use DIR as the installation prefix. *note Installation Names:: for
+ more details, including other options available for fine-tuning the
+ installation locations.
-`--no-create'
-`-n'
+'--no-create'
+'-n'
Run the configure checks, but stop before creating any output
files.
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
+'configure' also accepts some other, not widely useful, options. Run
+'configure --help' for more details.
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = .
-DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
- $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/configure $(am__configure_deps) \
- $(srcdir)/gtk-doc.pc.in $(top_srcdir)/gtkdoc/config.py.in \
- $(srcdir)/gtkdoc-check.in $(srcdir)/gtkdoc-depscan.in \
- $(srcdir)/gtkdoc-fixxref.in $(srcdir)/gtkdoc-mkdb.in \
- $(srcdir)/gtkdoc-mkhtml.in $(srcdir)/gtkdoc-mkman.in \
- $(srcdir)/gtkdoc-mkpdf.in $(srcdir)/gtkdoc-rebase.in \
- $(srcdir)/gtkdoc-scan.in $(srcdir)/gtkdoc-scangobj.in \
- $(srcdir)/gtkdocize.in COPYING TODO build-aux/compile \
- build-aux/config.guess build-aux/config.sub build-aux/depcomp \
- build-aux/install-sh build-aux/missing build-aux/ltmain.sh \
- $(top_srcdir)/build-aux/compile \
- $(top_srcdir)/build-aux/config.guess \
- $(top_srcdir)/build-aux/config.sub \
- $(top_srcdir)/build-aux/install-sh \
- $(top_srcdir)/build-aux/ltmain.sh \
- $(top_srcdir)/build-aux/missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/gtk-doc.pc.in \
+ $(srcdir)/gtkdoc-check.in $(srcdir)/gtkdoc-depscan.in \
+ $(srcdir)/gtkdoc-fixxref.in $(srcdir)/gtkdoc-mkdb.in \
+ $(srcdir)/gtkdoc-mkhtml.in $(srcdir)/gtkdoc-mkman.in \
+ $(srcdir)/gtkdoc-mkpdf.in $(srcdir)/gtkdoc-rebase.in \
+ $(srcdir)/gtkdoc-scan.in $(srcdir)/gtkdoc-scangobj.in \
+ $(srcdir)/gtkdocize.in $(top_srcdir)/build-aux/compile \
+ $(top_srcdir)/build-aux/config.guess \
+ $(top_srcdir)/build-aux/config.sub \
+ $(top_srcdir)/build-aux/install-sh \
+ $(top_srcdir)/build-aux/ltmain.sh \
+ $(top_srcdir)/build-aux/missing \
+ $(top_srcdir)/gtkdoc/config.py.in AUTHORS COPYING ChangeLog \
+ INSTALL NEWS README TODO build-aux/compile \
+ build-aux/config.guess build-aux/config.sub \
+ build-aux/install-sh build-aux/ltmain.sh build-aux/missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
$(am__post_remove_distdir)
dist-tarZ: distdir
- @echo WARNING: "Support for shar distribution archives is" \
- "deprecated." >&2
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
- @echo WARNING: "Support for distribution archives compressed with" \
- "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
- mkdir $(distdir)/_build $(distdir)/_inst
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
- --srcdir=.. --prefix="$$dc_install_base" \
+ --srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
uninstall-am uninstall-binSCRIPTS uninstall-gtkdocdataDATA \
uninstall-pkgconfigDATA uninstall-pylibdataDATA
+.PRECIOUS: Makefile
+
gtk-doc.flat.make: gtk-doc.make
@$(SED) -e "s/EXTRA_DIST =/EXTRA_DIST +=/" $< >$@
-GTK-Doc 1.26 (Aug 11 2017)
+GTK-Doc 1.27 (Dec 07 2017)
==============
+Finetune the python port.
+
+ Changes
+
+ o 773879 : scangobj: Do not generate unused parameters
+ o 786174 : Several test failures on Arch Linux
+ o 787495 : gtkdoc-fixxref crashes when running vim for syntax highlighting
+ o 787768 : Aborts when glib2.0-dev is not installed
+ o 787862 : Always open files in text mode and always use utf-8
+ o 788473 : fixxref crashes if a .devhelp2.gz file is found
+ o 789531 : Don't depend on the system shell
+ o 790022 : mkdb: Add support for (not optional) annotation
+ o 791131 : gtk-doc and python3: fixxref failures
+
+ Contributors
+
+ Alban Browaeys
+ Anders Jonsson
+ Christian Kirbach
+ Christoph Reiter
+ Daniel Mustieles
+ gkrithi8
+ Jan Alexander Steffens (heftig)
+ Marek Cernocky
+ Michael Catanzaro
+ Pavel Grunt
+ Philip Withnall
+ Rafael Fontenelle
+ Simon McVittie
+ Stefan Sauer
+ Will Thompson
+
+GTK-Doc 1.26 (Aug 11 2017)
+============
+
Remove tmpl support (gtkdoc-mktmpl). Port all tools from bash/perl to python.
Changes
- o 773879 : – scangobj: Do not generate unused parameters
+ o 773879 : scangobj: Do not generate unused parameters
o 780789 : Convert gtkdoc-scan from Perl to Python
o 752126 : Add support for inline program documentation
o 753052 : _() causes element a: validity error : ID idx already defined
o 764543 : /usr/bin/gtkdoc-mkpdf always exits with an error
o 768675 : make check fails on master
o 769125 : gtkdoc-mkhtml/pdf fails on spaces in search path
- o 769341 : gtkdoc-mkdb line 3966 triggers " Negative repeat count does nothing " warnings
- o 771255 : " Symbol name not found at the start of comment block " warning with " attributes " annotation.
+ o 769341 : gtkdoc-mkdb line 3966 triggers "Negative repeat count does nothing" warnings
+ o 771255 : "Symbol name not found at the start of comment block" warning with "attributes" annotation.
o 773151 : configure: Lower perl dependency to 5.16.0
o 774168 : gobject introspection annotations and gtk-doc parser do not agree
o 774812 : Error messages from xsltproc are hidden by gtkdoc-mkhtml
* expand urls (needds more work, see gtkdoc-mkdb : ExpandAbbreviations)
-= Testing =
-cd test/gobject
-diff -u --exclude="Makefile*" docs docs-tmpl | diffstat
-
-
= Running =
gtk-doc is using a makefile with several targets to get from sources to docs. It
uses makefile variables for configuration.
things nicer that the makefiles don't do well. This would also make it easy to
run it manually or integrate into other build systems.
+
= Intermediate files =
-Can we change the intermediate files into a perl-module? So that all we need to
-do is to import it. Ideally we have just one outfile for each tool:
-gtkdoc-scan -> scan.pm (decl.txt, decl-list.txt, types.txt, sections.txt)
-gtkdoc-scangobj -> scanobj.pm (interfacs, prerequisites, ...)
+Can we change the intermediate files into e.g. json or yaml so that we can just
+load it from python?
Can we drop the decl-list.txt file (or rename to make sure this is what a
generated section.txt would look like)
+
= Issues =
* gtkdoc-fixxref makefile targets use $HTML_DIR
* HTML_DIR: The directory where gtk-doc generated documentation is installed
* gtkdoc does not know about module versions
* this is causing troubles when multiple library versions are installed
(gtk+-{2,3}, gstreamer-{0.8,0.10,1.0}
- * right now gtk-doc is xreffing against any <module>/index.sgml found
+ * right now gtk-doc is xreffing against any <module>/*.devhelp2 found
* just using the one with a higher number won't work
* we might also need to reflow some things, as gtk-doc.xsl also runs the devhelp/devhelp2 generation
- but then the urls in the devhelp file, refer to the chunked html anyway
+
= Warnings =
Bugzilla has some requests for extra warnings. We should support a common
commandline option(s) in all tools to enable/disable the warnings. The makefiles
from the symbol.
- possible xrefs (e.g. adding a # or () would make it a successful xref)
+
= GIR =
== scanning ==
* ideas
- extra xsltproc options:
--novalid: saves ~ 0.12 sec
-- perl regexps
- - not really an issue, but we can improve by compiling the regexps
- http://stackoverflow.com/questions/550258/does-the-o-modifier-for-perl-regular-expressions-still-provide-any-benefit
- - we use $&, $', and $` in several places (comple match, pre-match and post-match).
- Those are slow and once they are used a single time perl prepares them for every match operation.
- Since perl 5.10 one can use the /p flag for matches where this is needed and then use
- ${^PREMATCH} , ${^MATCH} and ${^POSTMATCH}
-- perl profiling
- - http://blog.timbunce.org/2008/07/15/nytprof-v2-a-major-advance-in-perl-profilers/
- perl -d:NYTProf gtkdoc-mkdb ...
- nytprofhtml
- firefox nytprof/index.html
+= python =
+- consider swithcing to this markdown parser
+ https://pythonhosted.org/Markdown/index.html
+- switch intermediate files to json/yaml
+ - we need to pick something, that we can easilly output from plain c (produced by gtkdoc-scangobj)
+ - decl-list.txt and .types would need to stay
+ - maybe maintain one file per sourcefile (in a subdir) to eventually be able to
+ do incremental builds
+- refactor Read{Args,Declarations,Signals}File to output into a single dictionary each:
+ Signal{Names,Objects,Returns,...}[key] -> Signals[key].{names,objects,returns,...}
-# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.15.1 -*- Autoconf -*-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
-# serial 1 (pkg-config-0.24)
-#
-# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
+dnl pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
+dnl serial 11 (pkg-config-0.29)
+dnl
+dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com>
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful, but
+dnl WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; if not, write to the Free Software
+dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+dnl 02111-1307, USA.
+dnl
+dnl As a special exception to the GNU General Public License, if you
+dnl distribute this file as part of a program that contains a
+dnl configuration script generated by Autoconf, you may include it under
+dnl the same distribution terms that you use for the rest of that
+dnl program.
+
+dnl PKG_PREREQ(MIN-VERSION)
+dnl -----------------------
+dnl Since: 0.29
+dnl
+dnl Verify that the version of the pkg-config macros are at least
+dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's
+dnl installed version of pkg-config, this checks the developer's version
+dnl of pkg.m4 when generating configure.
+dnl
+dnl To ensure that this macro is defined, also add:
+dnl m4_ifndef([PKG_PREREQ],
+dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])])
+dnl
+dnl See the "Since" comment for each macro you use to see what version
+dnl of the macros you require.
+m4_defun([PKG_PREREQ],
+[m4_define([PKG_MACROS_VERSION], [0.29])
+m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
+ [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])])
+])dnl PKG_PREREQ
+
+dnl PKG_PROG_PKG_CONFIG([MIN-VERSION])
+dnl ----------------------------------
+dnl Since: 0.16
+dnl
+dnl Search for the pkg-config tool and set the PKG_CONFIG variable to
+dnl first found in the path. Checks that the version of pkg-config found
+dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is
+dnl used since that's the first version where most current features of
+dnl pkg-config existed.
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
PKG_CONFIG=""
fi
fi[]dnl
-])# PKG_PROG_PKG_CONFIG
+])dnl PKG_PROG_PKG_CONFIG
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists. Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurence in configure.ac, so if the first place
-# it's called might be skipped (such as if it is within an "if", you
-# have to call PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
+dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------------------------------
+dnl Since: 0.18
+dnl
+dnl Check to see whether a particular set of modules exists. Similar to
+dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
+dnl
+dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+dnl only at the first occurence in configure.ac, so if the first place
+dnl it's called might be skipped (such as if it is within an "if", you
+dnl have to call PKG_CHECK_EXISTS manually
AC_DEFUN([PKG_CHECK_EXISTS],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
if test -n "$PKG_CONFIG" && \
$3])dnl
fi])
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
+dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+dnl ---------------------------------------------
+dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting
+dnl pkg_failed based on the result.
m4_define([_PKG_CONFIG],
[if test -n "$$1"; then
pkg_cv_[]$1="$$1"
else
pkg_failed=untried
fi[]dnl
-])# _PKG_CONFIG
+])dnl _PKG_CONFIG
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
+dnl _PKG_SHORT_ERRORS_SUPPORTED
+dnl ---------------------------
+dnl Internal check to see if pkg-config supports short errors.
AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
else
_pkg_short_errors_supported=no
fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
+])dnl _PKG_SHORT_ERRORS_SUPPORTED
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
+dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl [ACTION-IF-NOT-FOUND])
+dnl --------------------------------------------------------------
+dnl Since: 0.4.0
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES might not happen, you should be sure to include an
+dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
AC_DEFUN([PKG_CHECK_MODULES],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
AC_MSG_RESULT([yes])
$3
fi[]dnl
-])# PKG_CHECK_MODULES
+])dnl PKG_CHECK_MODULES
+
+
+dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl [ACTION-IF-NOT-FOUND])
+dnl ---------------------------------------------------------------------
+dnl Since: 0.29
+dnl
+dnl Checks for existence of MODULES and gathers its build flags with
+dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags
+dnl and VARIABLE-PREFIX_LIBS from --libs.
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to
+dnl include an explicit call to PKG_PROG_PKG_CONFIG in your
+dnl configure.ac.
+AC_DEFUN([PKG_CHECK_MODULES_STATIC],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+_save_PKG_CONFIG=$PKG_CONFIG
+PKG_CONFIG="$PKG_CONFIG --static"
+PKG_CHECK_MODULES($@)
+PKG_CONFIG=$_save_PKG_CONFIG[]dnl
+])dnl PKG_CHECK_MODULES_STATIC
+
+
+dnl PKG_INSTALLDIR([DIRECTORY])
+dnl -------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable pkgconfigdir as the location where a module
+dnl should install pkg-config .pc files. By default the directory is
+dnl $libdir/pkgconfig, but the default can be changed by passing
+dnl DIRECTORY. The user can override through the --with-pkgconfigdir
+dnl parameter.
+AC_DEFUN([PKG_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+ [pkg-config installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([pkgconfigdir],
+ [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
+ [with_pkgconfigdir=]pkg_default)
+AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+])dnl PKG_INSTALLDIR
+
+
+dnl PKG_NOARCH_INSTALLDIR([DIRECTORY])
+dnl --------------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable noarch_pkgconfigdir as the location where a
+dnl module should install arch-independent pkg-config .pc files. By
+dnl default the directory is $datadir/pkgconfig, but the default can be
+dnl changed by passing DIRECTORY. The user can override through the
+dnl --with-noarch-pkgconfigdir parameter.
+AC_DEFUN([PKG_NOARCH_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+ [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([noarch-pkgconfigdir],
+ [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
+ [with_noarch_pkgconfigdir=]pkg_default)
+AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+])dnl PKG_NOARCH_INSTALLDIR
+
+
+dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
+dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------
+dnl Since: 0.28
+dnl
+dnl Retrieves the value of the pkg-config variable for the given module.
+AC_DEFUN([PKG_CHECK_VAR],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
+
+_PKG_CONFIG([$1], [variable="][$3]["], [$2])
+AS_VAR_COPY([$1], [pkg_cv_][$1])
+
+AS_VAR_IF([$1], [""], [$5], [$4])dnl
+])dnl PKG_CHECK_VAR
AC_DEFUN([YELP_HELP_INIT],
[
EXTRA_DIST += $(foreach f,$(HELP_MEDIA),$(foreach lc,$(HELP_LINGUAS),$(wildcard $(lc)/$(f))))
distdir: distdir-help-files
-distdir-help-files:
+distdir-help-files: $(_HELP_LC_FILES)
@for lc in C $(if $(YELP_LC_DIST),$(HELP_LINGUAS)) ; do \
$(MKDIR_P) "$(distdir)/$$lc"; \
for file in $(HELP_FILES); do \
.PHONY: install-help
install-data-am: $(if $(HELP_ID),install-help)
-install-help:
+install-help: $(_HELP_LC_FILES)
@for lc in C $(_HELP_LINGUAS); do \
$(mkinstalldirs) "$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)" || exit 1; \
done
m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([YELP_HELP_RULES])])
])
-# Copyright (C) 2002-2013 Free Software Foundation, Inc.
+# Copyright (C) 2002-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.14'
+[am__api_version='1.15'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.14.1], [],
+m4_if([$1], [1.15.1], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.14.1])dnl
+[AM_AUTOMAKE_VERSION([1.15.1])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
])
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Generate code to set up dependency tracking. -*- Autoconf -*-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
END
AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
fi
-fi])
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
fi
AC_SUBST([install_sh])])
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+# Copyright (C) 2003-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
[
dnl Find a Python interpreter. Python versions prior to 2.0 are not
dnl supported. (2.0 was released on October 16, 2000).
+ dnl FIXME: Remove the need to hard-code Python versions here.
m4_define_default([_AM_PYTHON_INTERPRETER_LIST],
-[python python2 python3 python3.3 python3.2 python3.1 python3.0 python2.7 dnl
+[python python2 python3 python3.8 python3.7 python3.6 python3.5 python3.4 python3.3 python3.2 python3.1 python3.0 python2.7 dnl
python2.6 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0])
AC_ARG_VAR([PYTHON], [the Python interpreter])
sys.exit(sys.hexversion < minverhex)"
AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])])
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
rm -f conftest.file
])
-# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+# Copyright (C) 2009-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006-2013 Free Software Foundation, Inc.
+# Copyright (C) 2006-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Check how to create a tarball. -*- Autoconf -*-
-# Copyright (C) 2004-2013 Free Software Foundation, Inc.
+# Copyright (C) 2004-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
scriptversion=2012-10-14.11; # UTC
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright 1992-2013 Free Software Foundation, Inc.
+# Copyright 1992-2016 Free Software Foundation, Inc.
-timestamp='2013-06-10'
+timestamp='2016-10-02'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
#
-# Originally written by Per Bothner.
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
#
# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
#
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.
me=`echo "$0" | sed -e 's,.*/,,'`
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
LIBC=gnu
#endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
;;
esac
# Note: NetBSD doesn't particularly care about the vendor
# portion of the name. We always set it to "unknown".
sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
+ /sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || \
+ echo unknown)`
case "${UNAME_MACHINE_ARCH}" in
armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
sh5el) machine=sh5le-unknown ;;
+ earmv*)
+ arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
+ endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'`
+ machine=${arch}${endian}-unknown
+ ;;
*) machine=${UNAME_MACHINE_ARCH}-unknown ;;
esac
# The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
+ # to ELF recently (or will in the future) and ABI.
case "${UNAME_MACHINE_ARCH}" in
+ earm*)
+ os=netbsdelf
+ ;;
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
eval $set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
os=netbsd
;;
esac
+ # Determine ABI tags.
+ case "${UNAME_MACHINE_ARCH}" in
+ earm*)
+ expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+ abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"`
+ ;;
+ esac
# The OS release
# Debian GNU/NetBSD machines have a different userland, and
# thus, need a distinct triplet. However, they do not need
release='-gnu'
;;
*)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2`
;;
esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
+ echo "${machine}-${os}${release}${abi}"
exit ;;
*:Bitrig:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
exit ;;
+ *:LibertyBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE}
+ exit ;;
*:ekkoBSD:*:*)
echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
exit ;;
*:MirBSD:*:*)
echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
exit ;;
+ *:Sortix:*:*)
+ echo ${UNAME_MACHINE}-unknown-sortix
+ exit ;;
alpha:OSF1:*:*)
case $UNAME_RELEASE in
*4.0)
ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
case "$ALPHA_CPU_TYPE" in
"EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
+ UNAME_MACHINE=alpha ;;
"EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
+ UNAME_MACHINE=alpha ;;
"LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
+ UNAME_MACHINE=alpha ;;
"EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
+ UNAME_MACHINE=alphaev5 ;;
"EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
+ UNAME_MACHINE=alphaev56 ;;
"EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
+ UNAME_MACHINE=alphapca56 ;;
"EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
+ UNAME_MACHINE=alphapca57 ;;
"EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
+ UNAME_MACHINE=alphaev6 ;;
"EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
+ UNAME_MACHINE=alphaev67 ;;
"EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
+ UNAME_MACHINE=alphaev68 ;;
"EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
+ UNAME_MACHINE=alphaev68 ;;
"EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
+ UNAME_MACHINE=alphaev68 ;;
"EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
+ UNAME_MACHINE=alphaev69 ;;
"EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
+ UNAME_MACHINE=alphaev7 ;;
"EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
+ UNAME_MACHINE=alphaev79 ;;
esac
# A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
exitcode=$?
trap '' 0
exit ;;
i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
eval $set_cc_for_build
- SUN_ARCH="i386"
+ SUN_ARCH=i386
# If there is a compiler, see if it is configured for 64-bit objects.
# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
# This test works for both compilers.
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
- SUN_ARCH="x86_64"
+ SUN_ARCH=x86_64
fi
fi
echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3
case "`/bin/arch`" in
sun3)
echo m68k-sun-sunos${UNAME_RELEASE}
else
IBM_ARCH=powerpc
fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
+ if [ -x /usr/bin/lslpp ] ; then
+ IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
else
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
532) # CPU_PA_RISC2_0
case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ 32) HP_ARCH=hppa2.0n ;;
+ 64) HP_ARCH=hppa2.0w ;;
+ '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20
esac ;;
esac
fi
exit (0);
}
EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
test -z "$HP_ARCH" && HP_ARCH=hppa
fi ;;
esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
+ if [ ${HP_ARCH} = hppa2.0w ]
then
eval $set_cc_for_build
# $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
# => hppa64-hp-hpux11.23
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
grep -q __LP64__
then
- HP_ARCH="hppa2.0w"
+ HP_ARCH=hppa2.0w
else
- HP_ARCH="hppa64"
+ HP_ARCH=hppa64
fi
fi
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit ;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit ;;
5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
exit ;;
- i*:MSYS*:*)
+ *:MSYS*:*)
echo ${UNAME_MACHINE}-pc-msys
exit ;;
i*:windows32*:*)
exit ;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
exit ;;
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
EV68*) UNAME_MACHINE=alphaev68 ;;
esac
objdump --private-headers /bin/sh | grep -q ld.so.1
- if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+ if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
arc:Linux:*:* | arceb:Linux:*:*)
crisv32:Linux:*:*)
echo ${UNAME_MACHINE}-axis-linux-${LIBC}
exit ;;
+ e2k:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
frv:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
ia64:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
+ k1om:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
m32r*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
;;
- or1k:Linux:*:*)
+ mips64el:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
- or32:Linux:*:*)
+ openrisc*:Linux:*:*)
+ echo or1k-unknown-linux-${LIBC}
+ exit ;;
+ or32:Linux:*:* | or1k*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
padre:Linux:*:*)
ppcle:Linux:*:*)
echo powerpcle-unknown-linux-${LIBC}
exit ;;
+ riscv32:Linux:*:* | riscv64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
s390:Linux:*:* | s390x:Linux:*:*)
echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
exit ;;
echo ${UNAME_MACHINE}-dec-linux-${LIBC}
exit ;;
x86_64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo ${UNAME_MACHINE}-pc-linux-${LIBC}
exit ;;
xtensa*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i586.
# Note: whatever this is, it MUST be the same as what config.sub
- # prints for the "djgpp" host, or else GDB configury will decide that
+ # prints for the "djgpp" host, or else GDB configure will decide that
# this is a cross-build.
echo i586-pc-msdosdjgpp
exit ;;
SX-8R:SUPER-UX:*:*)
echo sx8r-nec-superux${UNAME_RELEASE}
exit ;;
+ SX-ACE:SUPER-UX:*:*)
+ echo sxace-nec-superux${UNAME_RELEASE}
+ exit ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
exit ;;
if test "$UNAME_PROCESSOR" = unknown ; then
UNAME_PROCESSOR=powerpc
fi
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
- if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
- grep IS_64BIT_ARCH >/dev/null
- then
- case $UNAME_PROCESSOR in
- i386) UNAME_PROCESSOR=x86_64 ;;
- powerpc) UNAME_PROCESSOR=powerpc64 ;;
- esac
+ if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
+ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ case $UNAME_PROCESSOR in
+ i386) UNAME_PROCESSOR=x86_64 ;;
+ powerpc) UNAME_PROCESSOR=powerpc64 ;;
+ esac
+ fi
fi
+ elif test "$UNAME_PROCESSOR" = i386 ; then
+ # Avoid executing cc on OS X 10.9, as it ships with a stub
+ # that puts up a graphical alert prompting to install
+ # developer tools. Any system running Mac OS X 10.7 or
+ # later (Darwin 11 and later) is required to have a 64-bit
+ # processor. This is not true of the ARM version of Darwin
+ # that Apple uses in portable devices.
+ UNAME_PROCESSOR=x86_64
fi
echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
exit ;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
+ if test "$UNAME_PROCESSOR" = x86; then
UNAME_PROCESSOR=i386
UNAME_MACHINE=pc
fi
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
# operating systems.
- if test "$cputype" = "386"; then
+ if test "$cputype" = 386; then
UNAME_MACHINE=i386
else
UNAME_MACHINE="$cputype"
echo i386-pc-xenix
exit ;;
i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'`
exit ;;
i*86:rdos:*:*)
echo ${UNAME_MACHINE}-pc-rdos
x86_64:VMkernel:*:*)
echo ${UNAME_MACHINE}-unknown-esx
exit ;;
-esac
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
+ amd64:Isilon\ OneFS:*:*)
+ echo x86_64-unknown-onefs
exit ;;
- esac
-fi
+esac
cat >&2 <<EOF
$0: unable to guess system type
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
+This script (version $timestamp), has failed to recognize the
+operating system you are using. If your script is old, overwrite
+config.guess and config.sub with the latest versions from:
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
and
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
+If $0 has already been updated, send the following data and any
+information you think might be pertinent to config-patches@gnu.org to
+provide the necessary information to handle your system.
config.guess timestamp = $timestamp
#! /bin/sh
# Configuration validation subroutine script.
-# Copyright 1992-2013 Free Software Foundation, Inc.
+# Copyright 1992-2016 Free Software Foundation, Inc.
-timestamp='2013-08-10'
+timestamp='2016-11-04'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# of the GNU General Public License, version 3 ("GPLv3").
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# Otherwise, we print the canonical config type on stdout and succeed.
# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
+Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
Canonicalize a configuration name.
version="\
GNU config.sub ($timestamp)
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
case $maybe_os in
nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
- knetbsd*-gnu* | netbsd*-gnu* | \
- kopensolaris*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
+ kopensolaris*-gnu* | cloudabi*-eabi* | \
storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
| arc | arceb \
| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
| avr | avr32 \
+ | ba \
| be32 | be64 \
| bfin \
| c4x | c8051 | clipper \
| d10v | d30v | dlx | dsp16xx \
- | epiphany \
- | fido | fr30 | frv \
+ | e2k | epiphany \
+ | fido | fr30 | frv | ft32 \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| hexagon \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
+ | k1om \
| le32 | le64 \
| lm32 \
| m32c | m32r | m32rle | m68000 | m68k | m88k \
| mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
+ | mipsisa32r6 | mipsisa32r6el \
| mipsisa64 | mipsisa64el \
| mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64r6 | mipsisa64r6el \
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
| mipsr5900 | mipsr5900el \
| nds32 | nds32le | nds32be \
| nios | nios2 | nios2eb | nios2el \
| ns16k | ns32k \
- | open8 \
- | or1k | or32 \
+ | open8 | or1k | or1knd | or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle \
+ | pru \
| pyramid \
+ | riscv32 | riscv64 \
| rl78 | rx \
| score \
- | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
| ubicom32 \
| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+ | visium \
| we32k \
| x86 | xc16x | xstormy16 | xtensa \
| z8k | z80)
c6x)
basic_machine=tic6x-unknown
;;
- m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
+ leon|leon[3-9])
+ basic_machine=sparc-$basic_machine
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
basic_machine=$basic_machine-unknown
os=-none
;;
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* | avr32-* \
+ | ba-* \
| be32-* | be64-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* \
| c8051-* | clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
- | elxsi-* \
+ | e2k-* | elxsi-* \
| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| hexagon-* \
| i*86-* | i860-* | i960-* | ia64-* \
| ip2k-* | iq2000-* \
+ | k1om-* \
| le32-* | le64-* \
| lm32-* \
| m32c-* | m32r-* | m32rle-* \
| mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa32r6-* | mipsisa32r6el-* \
| mipsisa64-* | mipsisa64el-* \
| mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64r6-* | mipsisa64r6el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipsr5900-* | mipsr5900el-* \
| nios-* | nios2-* | nios2eb-* | nios2el-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| open8-* \
+ | or1k*-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+ | pru-* \
| pyramid-* \
+ | riscv32-* | riscv64-* \
| rl78-* | romp-* | rs6000-* | rx-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
| sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
| tahoe-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tile*-* \
| ubicom32-* \
| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
| vax-* \
+ | visium-* \
| we32k-* \
| x86-* | x86_64-* | xc16x-* | xps100-* \
| xstormy16-* | xtensa*-* \
basic_machine=i386-pc
os=-aros
;;
+ asmjs)
+ basic_machine=asmjs-unknown
+ ;;
aux)
basic_machine=m68k-apple
os=-aux
basic_machine=m68k-bull
os=-sysv3
;;
+ e500v[12])
+ basic_machine=powerpc-unknown
+ os=$os"spe"
+ ;;
+ e500v[12]-*)
+ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=$os"spe"
+ ;;
ebmon29k)
basic_machine=a29k-amd
os=-ebmon
basic_machine=m68k-isi
os=-sysv
;;
+ leon-*|leon[3-9]-*)
+ basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
+ ;;
m68knommu)
basic_machine=m68k-unknown
os=-linux
basic_machine=powerpc-unknown
os=-morphos
;;
+ moxiebox)
+ basic_machine=moxie-unknown
+ os=-moxiebox
+ ;;
msdos)
basic_machine=i386-pc
os=-msdos
ppc-* | ppcbe-*)
basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
+ ppcle | powerpclittle)
basic_machine=powerpcle-unknown
;;
ppcle-* | powerpclittle-*)
;;
ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ ppc64le | powerpc64little)
basic_machine=powerpc64le-unknown
;;
ppc64le-* | powerpc64little-*)
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
| -sym* | -kopensolaris* | -plan9* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* | -aros* \
+ | -aos* | -aros* | -cloudabi* | -sortix* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -bitrig* | -openbsd* | -solidbsd* \
+ | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \
| -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
| -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* | -cegcc* \
| -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+ | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
| -linux-newlib* | -linux-musl* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \
+ | -onefs* | -tirtos* | -phoenix* | -fuchsia*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
;;
-nacl*)
;;
+ -ios)
+ ;;
-none)
;;
*)
mips*-*)
os=-elf
;;
- or1k-*)
- os=-elf
- ;;
or32-*)
os=-coff
;;
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2013-05-30.07; # UTC
+scriptversion=2016-01-11.22; # UTC
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2011-11-20.07; # UTC
+scriptversion=2014-09-12.12; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# This script is compatible with the BSD install script, but was written
# from scratch.
+tab=' '
nl='
'
-IFS=" "" $nl"
+IFS=" $tab$nl"
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
-# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
posix_mkdir=
# Desired mode of installed file.
dst_arg=
copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+ case $mode in
+ *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift;;
-s) stripcmd=$stripprog;;
- -t) dst_arg=$2
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- shift;;
+ -t)
+ is_target_a_directory=always
+ dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
- -T) no_target_directory=true;;
+ -T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
- break;;
+ --) shift
+ break;;
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
*) break;;
esac
shift
done
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+ if test -n "$dst_arg"; then
+ echo "$0: target directory not allowed when installing a directory." >&2
+ exit 1
+ fi
+fi
+
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
fi
if test -z "$dir_arg"; then
+ if test $# -gt 1 || test "$is_target_a_directory" = always; then
+ if test ! -d "$dst_arg"; then
+ echo "$0: $dst_arg: Is not a directory." >&2
+ exit 1
+ fi
+ fi
+fi
+
+if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2
*[0-7])
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw='% 200'
+ u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw=,u+rw
+ u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
+ if test "$is_target_a_directory" = never; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
+ dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ # $RANDOM is not portable (e.g. dash); use it when possible to
+ # lower collision chance
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ # As "mkdir -p" follows symlinks and we work in /tmp possibly; so
+ # create the $tmpdir first (and fail if unsuccessful) to make sure
+ # that nobody tries to guess the $tmpdir name.
+ if (umask $mkdir_umask &&
+ $mkdirprog $mkdir_mode "$tmpdir" &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ test_tmpdir="$tmpdir/a"
+ ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
esac
if
$posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- [-=\(\)!]*) prefix='./';;
- *) prefix='';;
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
esac
- eval "$initialize_posix_glob"
-
oIFS=$IFS
IFS=/
- $posix_glob set -f
+ set -f
set fnord $dstdir
shift
- $posix_glob set +f
+ set +f
IFS=$oIFS
prefixes=
for d
do
- test X"$d" = X && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
+ test X"$d" = X && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
done
if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
fi
fi
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+ set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
+ set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+## by inline-source v2014-01-03.01
-# libtool (GNU libtool) 2.4.2
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-# --config show all configuration variables
-# --debug enable verbose shell tracing
-# -n, --dry-run display commands without modifying any files
-# --features display basic configuration information and exit
-# --mode=MODE use operation mode MODE
-# --preserve-dup-deps don't remove duplicate dependency libraries
-# --quiet, --silent don't print informational messages
-# --no-quiet, --no-silent
-# print informational messages (default)
-# --no-warn don't display warning messages
-# --tag=TAG use configuration variables from tag TAG
-# -v, --verbose print more informational messages than default
-# --no-verbose don't print the extra informational messages
-# --version print version information
-# -h, --help, --help-all print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-# clean remove files from the build directory
-# compile compile a source file into a libtool object
-# execute automatically set library path, then run a program
-# finish complete the installation of libtool libraries
-# install install libraries or executables
-# link create a library or an executable
-# uninstall remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE. When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-# host-triplet: $host
-# shell: $SHELL
-# compiler: $LTCC
-# compiler flags: $LTCFLAGS
-# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1.7ubuntu1
-# automake: $automake_version
-# autoconf: $autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
PROGRAM=libtool
PACKAGE=libtool
-VERSION="2.4.2 Debian-2.4.2-1.7ubuntu1"
-TIMESTAMP=""
-package_revision=1.3337
+VERSION="2.4.6 Debian-2.4.6-2"
+package_revision=2.4.6
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
- lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ eval "if test set = \"\${$_G_var+set}\"; then
+ save_$_G_var=\$$_G_var
+ $_G_var=C
+ export $_G_var
+ _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+ _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
fi"
done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
-$lt_unset CDPATH
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp $nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+ _G_progs_list=$1
+ _G_check_func=$2
+ _G_PATH=${3-"$PATH"}
+
+ _G_path_prog_max=0
+ _G_path_prog_found=false
+ _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+ for _G_dir in $_G_PATH; do
+ IFS=$_G_save_IFS
+ test -z "$_G_dir" && _G_dir=.
+ for _G_prog_name in $_G_progs_list; do
+ for _exeext in '' .EXE; do
+ _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+ func_executable_p "$_G_path_prog" || continue
+ case `"$_G_path_prog" --version 2>&1` in
+ *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+ *) $_G_check_func $_G_path_prog
+ func_path_progs_result=$func_check_prog_result
+ ;;
+ esac
+ $_G_path_prog_found && break 3
+ done
+ done
+ done
+ IFS=$_G_save_IFS
+ test -z "$func_path_progs_result" && {
+ echo "no acceptable sed could be found in \$PATH" >&2
+ exit 1
+ }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+ _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for _G_i in 1 2 3 4 5 6 7; do
+ _G_sed_script=$_G_sed_script$nl$_G_sed_script
+ done
+ echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+ _G_sed_script=
+
+ func_check_prog_sed ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo '' >> conftest.nl
+ "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+ rm -f conftest.sed
+ SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+ func_check_prog_grep ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ _G_path_prog_max=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo 'GREP' >> conftest.nl
+ "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+ GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables. These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
: ${MAKE="make"}
: ${MKDIR="mkdir"}
: ${MV="mv -f"}
: ${RM="rm -f"}
: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-} # func_dirname may be replaced by extended shell implementation
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
- func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same. If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion. Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+ s/$_G_bs4/&\\
+/g
+ s/^$_G_bs2$_G_dollar/$_G_bs&/
+ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+ s/\n//g"
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
- esac
-} # func_stripname may be replaced by extended shell implementation
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
- s@/\./@/@g
- t dotsl
- s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-# value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
- # Start from root dir and reassemble the path.
- func_normal_abspath_result=
- func_normal_abspath_tpath=$1
- func_normal_abspath_altnamespace=
- case $func_normal_abspath_tpath in
- "")
- # Empty path, that just means $cwd.
- func_stripname '' '/' "`pwd`"
- func_normal_abspath_result=$func_stripname_result
- return
- ;;
- # The next three entries are used to spot a run of precisely
- # two leading slashes without using negated character classes;
- # we take advantage of case's first-match behaviour.
- ///*)
- # Unusual form of absolute path, do nothing.
- ;;
- //*)
- # Not necessarily an ordinary path; POSIX reserves leading '//'
- # and for example Cygwin uses it to access remote file shares
- # over CIFS/SMB, so we conserve a leading double slash if found.
- func_normal_abspath_altnamespace=/
- ;;
- /*)
- # Absolute path, do nothing.
- ;;
- *)
- # Relative path, prepend $cwd.
- func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
- ;;
- esac
- # Cancel out all the simple stuff to save iterations. We also want
- # the path to end with a slash for ease of parsing, so make sure
- # there is one (and only one) here.
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
- while :; do
- # Processed it all yet?
- if test "$func_normal_abspath_tpath" = / ; then
- # If we ascended to the root using ".." the result may be empty now.
- if test -z "$func_normal_abspath_result" ; then
- func_normal_abspath_result=/
- fi
- break
- fi
- func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcar"`
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcdr"`
- # Figure out what to do with it
- case $func_normal_abspath_tcomponent in
- "")
- # Trailing empty path component, ignore it.
- ;;
- ..)
- # Parent dir; strip last assembled component from result.
- func_dirname "$func_normal_abspath_result"
- func_normal_abspath_result=$func_dirname_result
- ;;
- *)
- # Actual path component, append it.
- func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
- ;;
- esac
- done
- # Restore leading double-slash if one was found on entry.
- func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-# value returned in "$func_relative_path_result"
-func_relative_path ()
-{
- func_relative_path_result=
- func_normal_abspath "$1"
- func_relative_path_tlibdir=$func_normal_abspath_result
- func_normal_abspath "$2"
- func_relative_path_tbindir=$func_normal_abspath_result
-
- # Ascend the tree starting from libdir
- while :; do
- # check if we have found a prefix of bindir
- case $func_relative_path_tbindir in
- $func_relative_path_tlibdir)
- # found an exact match
- func_relative_path_tcancelled=
- break
- ;;
- $func_relative_path_tlibdir*)
- # found a matching prefix
- func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
- func_relative_path_tcancelled=$func_stripname_result
- if test -z "$func_relative_path_result"; then
- func_relative_path_result=.
- fi
- break
- ;;
- *)
- func_dirname $func_relative_path_tlibdir
- func_relative_path_tlibdir=${func_dirname_result}
- if test "x$func_relative_path_tlibdir" = x ; then
- # Have to descend all the way to the root!
- func_relative_path_result=../$func_relative_path_result
- func_relative_path_tcancelled=$func_relative_path_tbindir
- break
- fi
- func_relative_path_result=../$func_relative_path_result
- ;;
- esac
- done
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
- # Now calculate path; take care to avoid doubling-up slashes.
- func_stripname '' '/' "$func_relative_path_result"
- func_relative_path_result=$func_stripname_result
- func_stripname '/' '/' "$func_relative_path_tcancelled"
- if test "x$func_stripname_result" != x ; then
- func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
- fi
+# By convention, finish your script with:
+#
+# exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
- # Normalisation. If bindir is libdir, return empty string,
- # else relative path ending with a slash; either way, target
- # file name can be directly appended.
- if test ! -z "$func_relative_path_result"; then
- func_stripname './' '' "$func_relative_path_result/"
- func_relative_path_result=$func_stripname_result
- fi
-}
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
-# Make sure we have an absolute path for reexecution:
+# Make sure we have an absolute progpath for reexecution:
case $progpath in
[\\/]*|[A-Za-z]:\\*) ;;
*[\\/]*)
- progdir=$func_dirname_result
+ progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
progdir=`cd "$progdir" && pwd`
- progpath="$progdir/$progname"
+ progpath=$progdir/$progname
;;
*)
- save_IFS="$IFS"
+ _G_IFS=$IFS
IFS=${PATH_SEPARATOR-:}
for progdir in $PATH; do
- IFS="$save_IFS"
+ IFS=$_G_IFS
test -x "$progdir/$progname" && break
done
- IFS="$save_IFS"
+ IFS=$_G_IFS
test -n "$progdir" || progdir=`pwd`
- progpath="$progdir/$progname"
+ progpath=$progdir/$progname
;;
esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes. A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
- s/$bs4/&\\
-/g
- s/^$bs2$dollar/$bs&/
- s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
- s/\n//g"
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
-# Standard options:
opt_dry_run=false
-opt_help=false
opt_quiet=false
opt_verbose=false
-opt_warning=:
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
-}
+# Categories 'all' and 'none' are always available. Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
- $opt_verbose && func_echo ${1+"$@"}
+# By default, display warnings according to 'opt_warning_types'. Set
+# 'warning_func' to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
- # A bug in bash halts the script if the last line of a function
- # fails when set -e is in force, so we need another command to
- # work around that:
- :
-}
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO "$*"
-}
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
-{
- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
- # bash bug again:
- :
-}
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
{
- func_error ${1+"$@"}
- exit $EXIT_FAILURE
-}
+ $debug_cmd
+
+ test -t 1 && {
+ # COLORTERM and USE_ANSI_COLORS environment variables take
+ # precedence, because most terminfo databases neglect to describe
+ # whether color sequences are supported.
+ test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+ if test 1 = "$USE_ANSI_COLORS"; then
+ # Standard ANSI escape sequences
+ tc_reset='\e[0m'
+ tc_bold='\e[1m'; tc_standout='\e[7m'
+ tc_red='\e[31m'; tc_green='\e[32m'
+ tc_blue='\e[34m'; tc_cyan='\e[36m'
+ else
+ # Otherwise trust the terminfo database after all.
+ test -n "`tput sgr0 2>/dev/null`" && {
+ tc_reset=`tput sgr0`
+ test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+ tc_standout=$tc_bold
+ test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+ test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+ test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+ test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+ test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+ }
+ fi
+ }
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
- func_error ${1+"$@"}
- func_fatal_error "$help"
+ require_term_colors=:
}
-help="Try \`$progname --help' for more information." ## default
-# func_grep expression filename
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+ # We should try to minimise forks, especially on Windows where they are
+ # unreasonably slow, so skip the feature probes when bash or zsh are
+ # being used:
+ if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+ : ${_G_HAVE_ARITH_OP="yes"}
+ : ${_G_HAVE_XSI_OPS="yes"}
+ # The += operator was introduced in bash 3.1
+ case $BASH_VERSION in
+ [12].* | 3.0 | 3.0*) ;;
+ *)
+ : ${_G_HAVE_PLUSEQ_OP="yes"}
+ ;;
+ esac
+ fi
+
+ # _G_HAVE_PLUSEQ_OP
+ # Can be empty, in which case the shell is probed, "yes" if += is
+ # useable or anything else if it does not work.
+ test -z "$_G_HAVE_PLUSEQ_OP" \
+ && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+ && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_append ()
+ {
+ $debug_cmd
+
+ eval "$1+=\$2"
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_append ()
+ {
+ $debug_cmd
+
+ eval "$1=\$$1\$2"
+ }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+ eval 'func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1+=\\ \$func_quote_for_eval_result"
+ }'
+else
+ func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1=\$$1\\ \$func_quote_for_eval_result"
+ }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE. For example:
+#
+# func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+ $debug_cmd
+
+ eval _G_current_value='`$ECHO $'$1'`'
+ _G_delim=`expr "$2" : '\(.\)'`
+
+ case $_G_delim$_G_current_value$_G_delim in
+ *"$2$_G_delim"*) ;;
+ *) func_append "$@" ;;
+ esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+ test -z "$_G_HAVE_ARITH_OP" \
+ && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+ && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+ eval 'func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=$(( $* ))
+ }'
+else
+ func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=`expr "$@"`
+ }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ # If this shell supports suffix pattern removal, then use it to avoid
+ # forking. Hide the definitions single quotes in case the shell chokes
+ # on unsupported syntax...
+ _b='func_basename_result=${1##*/}'
+ _d='case $1 in
+ */*) func_dirname_result=${1%/*}$2 ;;
+ * ) func_dirname_result=$3 ;;
+ esac'
+
+else
+ # ...otherwise fall back to using sed.
+ _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+ _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"`
+ if test "X$func_dirname_result" = "X$1"; then
+ func_dirname_result=$3
+ else
+ func_append func_dirname_result "$2"
+ fi'
+fi
+
+eval 'func_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+ $debug_cmd
+
+ '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+ '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+ $debug_cmd
+
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ _G_infix=$1; shift
+ _G_indent=$_G_infix
+ _G_prefix="$progname: $_G_infix: "
+ _G_message=$*
+
+ # Strip color escape sequences before counting printable length
+ for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+ do
+ test -n "$_G_tc" && {
+ _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+ _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+ }
+ done
+ _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes
+
+ func_echo_infix_1_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_infix_1_IFS
+ $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+ _G_prefix=$_G_indent
+ done
+ IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ $debug_cmd
+
+ func_error "$*"
+ exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
# Check whether EXPRESSION matches any line of FILENAME, without output.
func_grep ()
{
+ $debug_cmd
+
$GREP "$1" "$2" >/dev/null 2>&1
}
-# func_mkdir_p directory-path
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+ test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=${#1}
+ }'
+else
+ func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+ }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
# Make sure the entire path to DIRECTORY-PATH is available.
func_mkdir_p ()
{
- my_directory_path="$1"
- my_dir_list=
+ $debug_cmd
- if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+ _G_directory_path=$1
+ _G_dir_list=
- # Protect directory names starting with `-'
- case $my_directory_path in
- -*) my_directory_path="./$my_directory_path" ;;
+ if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+ # Protect directory names starting with '-'
+ case $_G_directory_path in
+ -*) _G_directory_path=./$_G_directory_path ;;
esac
# While some portion of DIR does not yet exist...
- while test ! -d "$my_directory_path"; do
+ while test ! -d "$_G_directory_path"; do
# ...make a list in topmost first order. Use a colon delimited
# list incase some portion of path contains whitespace.
- my_dir_list="$my_directory_path:$my_dir_list"
+ _G_dir_list=$_G_directory_path:$_G_dir_list
# If the last portion added has no slash in it, the list is done
- case $my_directory_path in */*) ;; *) break ;; esac
+ case $_G_directory_path in */*) ;; *) break ;; esac
# ...otherwise throw away the child directory and loop
- my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
done
- my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+ _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
- save_mkdir_p_IFS="$IFS"; IFS=':'
- for my_dir in $my_dir_list; do
- IFS="$save_mkdir_p_IFS"
- # mkdir can fail with a `File exist' error if two processes
+ func_mkdir_p_IFS=$IFS; IFS=:
+ for _G_dir in $_G_dir_list; do
+ IFS=$func_mkdir_p_IFS
+ # mkdir can fail with a 'File exist' error if two processes
# try to create one of the directories concurrently. Don't
# stop in that case!
- $MKDIR "$my_dir" 2>/dev/null || :
+ $MKDIR "$_G_dir" 2>/dev/null || :
done
- IFS="$save_mkdir_p_IFS"
+ IFS=$func_mkdir_p_IFS
# Bail out if we (or some other process) failed to create a directory.
- test -d "$my_directory_path" || \
- func_fatal_error "Failed to create \`$1'"
+ test -d "$_G_directory_path" || \
+ func_fatal_error "Failed to create '$1'"
fi
}
-# func_mktempdir [string]
+# func_mktempdir [BASENAME]
+# -------------------------
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
+# given, BASENAME is the basename for that directory.
func_mktempdir ()
{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
+ $debug_cmd
+
+ _G_template=${TMPDIR-/tmp}/${1-$progname}
- if test "$opt_dry_run" = ":"; then
+ if test : = "$opt_dry_run"; then
# Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
+ _G_tmpdir=$_G_template-$$
else
# If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+ _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
- if test ! -d "$my_tmpdir"; then
+ if test ! -d "$_G_tmpdir"; then
# Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
+ _G_tmpdir=$_G_template-${RANDOM-0}$$
- save_mktempdir_umask=`umask`
+ func_mktempdir_umask=`umask`
umask 0077
- $MKDIR "$my_tmpdir"
- umask $save_mktempdir_umask
+ $MKDIR "$_G_tmpdir"
+ umask $func_mktempdir_umask
fi
# If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || \
- func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ test -d "$_G_tmpdir" || \
+ func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+ fi
+
+ $ECHO "$_G_tmpdir"
+}
+
+
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
+{
+ $debug_cmd
+
+ # These SED scripts presuppose an absolute path with a trailing slash.
+ _G_pathcar='s|^/\([^/]*\).*$|\1|'
+ _G_pathcdr='s|^/[^/]*||'
+ _G_removedotparts=':dotsl
+ s|/\./|/|g
+ t dotsl
+ s|/\.$|/|'
+ _G_collapseslashes='s|/\{1,\}|/|g'
+ _G_finalslash='s|/*$|/|'
+
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test / = "$func_normal_abspath_tpath"; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result"; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+ $debug_cmd
+
+ $opt_quiet || func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+ $debug_cmd
+
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=$func_dirname_result
+ if test -z "$func_relative_path_tlibdir"; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test -n "$func_stripname_result"; then
+ func_append func_relative_path_result "/$func_stripname_result"
+ fi
+
+ # Normalisation. If bindir is libdir, return '.' else relative path.
+ if test -n "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
fi
- $ECHO "$my_tmpdir"
+ test -n "$func_relative_path_result" || func_relative_path_result=.
+
+ :
+}
+
+
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+# i) func_quote_for_eval_result
+# double-quoted, suitable for a subsequent eval
+# ii) func_quote_for_eval_unquoted_result
+# has all characters that are still active within double
+# quotes backslashified.
+func_quote_for_eval ()
+{
+ $debug_cmd
+
+ func_quote_for_eval_unquoted_result=
+ func_quote_for_eval_result=
+ while test 0 -lt $#; do
+ case $1 in
+ *[\\\`\"\$]*)
+ _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+ *)
+ _G_unquoted_arg=$1 ;;
+ esac
+ if test -n "$func_quote_for_eval_unquoted_result"; then
+ func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+ else
+ func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+ fi
+
+ case $_G_unquoted_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and variable expansion
+ # for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ _G_quoted_arg=\"$_G_unquoted_arg\"
+ ;;
+ *)
+ _G_quoted_arg=$_G_unquoted_arg
+ ;;
+ esac
+
+ if test -n "$func_quote_for_eval_result"; then
+ func_append func_quote_for_eval_result " $_G_quoted_arg"
+ else
+ func_append func_quote_for_eval_result "$_G_quoted_arg"
+ fi
+ shift
+ done
+}
+
+
+# func_quote_for_expand ARG
+# -------------------------
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ $debug_cmd
+
+ case $1 in
+ *[\\\`\"]*)
+ _G_arg=`$ECHO "$1" | $SED \
+ -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ _G_arg=$1 ;;
+ esac
+
+ case $_G_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ _G_arg=\"$_G_arg\"
+ ;;
+ esac
+
+ func_quote_for_expand_result=$_G_arg
+}
+
+
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_stripname ()
+ {
+ $debug_cmd
+
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary variable first.
+ func_stripname_result=$3
+ func_stripname_result=${func_stripname_result#"$1"}
+ func_stripname_result=${func_stripname_result%"$2"}
+ }'
+else
+ func_stripname ()
+ {
+ $debug_cmd
+
+ case $2 in
+ .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+ *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+ esac
+ }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ $debug_cmd
+
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ func_quote_for_expand "$_G_cmd"
+ eval "func_notquiet $func_quote_for_expand_result"
+
+ $opt_dry_run || {
+ eval "$_G_cmd"
+ _G_status=$?
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
+ fi
+ }
+}
+
+
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ $debug_cmd
+
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ $opt_quiet || {
+ func_quote_for_expand "$_G_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ $opt_dry_run || {
+ eval "$_G_user_locale
+ $_G_cmd"
+ _G_status=$?
+ eval "$_G_safe_locale"
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
+ fi
+ }
+}
+
+
+# func_tr_sh
+# ----------
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ $debug_cmd
+
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $debug_cmd
+
+ $opt_verbose && func_echo "$*"
+
+ :
+}
+
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+ $debug_cmd
+
+ # CATEGORY must be in the warning_categories list!
+ case " $warning_categories " in
+ *" $1 "*) ;;
+ *) func_internal_error "invalid warning category '$1'" ;;
+ esac
+
+ _G_category=$1
+ shift
+
+ case " $opt_warning_types " in
+ *" $_G_category "*) $warning_func ${1+"$@"} ;;
+ esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+ $debug_cmd
+
+ printf '%s\n%s\n' "$1" "$2" \
+ | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false. Use it like this:
+#
+# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+ $debug_cmd
+
+ test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+# #!/bin/sh
+# . relative/path/to/funclib.sh
+# . relative/path/to/options-parser
+# scriptversion=1.0
+# func_options ${1+"$@"}
+# eval set dummy "$func_options_result"; shift
+# ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'. Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+ --debug enable verbose shell tracing
+ -W, --warnings=CATEGORY
+ report the warnings falling in CATEGORY [all]
+ -v, --verbose verbosely report processing
+ --version print version information and exit
+ -h, --help print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+ 'all' show all warnings
+ 'none' turn off all the warnings
+ 'error' warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code. A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+ $debug_cmd
+
+ func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not accept hook functions." ;;
+ esac
+
+ eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+ $debug_cmd
+
+ eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+ esac
+
+ eval _G_hook_fns=\$$1_hooks; shift
+
+ for _G_hook in $_G_hook_fns; do
+ eval $_G_hook '"$@"'
+
+ # store returned options list back into positional
+ # parameters for next 'cmd' execution.
+ eval _G_hook_result=\$${_G_hook}_result
+ eval set dummy "$_G_hook_result"; shift
+ done
+
+ func_quote_for_eval ${1+"$@"}
+ func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'. Like this:
+#
+# my_options_prep ()
+# {
+# $debug_cmd
+#
+# # Extend the existing usage message.
+# usage_message=$usage_message'
+# -s, --silent don'\''t print informational messages
+# '
+#
+# func_quote_for_eval ${1+"$@"}
+# my_options_prep_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_options_prep my_options_prep
+#
+#
+# my_silent_option ()
+# {
+# $debug_cmd
+#
+# # Note that for efficiency, we parse as many options as we can
+# # recognise in a loop before passing the remainder back to the
+# # caller on the first unrecognised argument we encounter.
+# while test $# -gt 0; do
+# opt=$1; shift
+# case $opt in
+# --silent|-s) opt_silent=: ;;
+# # Separate non-argument short options:
+# -s*) func_split_short_opt "$_G_opt"
+# set dummy "$func_split_short_opt_name" \
+# "-$func_split_short_opt_arg" ${1+"$@"}
+# shift
+# ;;
+# *) set dummy "$_G_opt" "$*"; shift; break ;;
+# esac
+# done
+#
+# func_quote_for_eval ${1+"$@"}
+# my_silent_option_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_parse_options my_silent_option
+#
+#
+# my_option_validation ()
+# {
+# $debug_cmd
+#
+# $opt_silent && $opt_verbose && func_fatal_help "\
+# '--silent' and '--verbose' options are mutually exclusive."
+#
+# func_quote_for_eval ${1+"$@"}
+# my_option_validation_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse. It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+ $debug_cmd
+
+ func_options_prep ${1+"$@"}
+ eval func_parse_options \
+ ${func_options_prep_result+"$func_options_prep_result"}
+ eval func_validate_options \
+ ${func_parse_options_result+"$func_parse_options_result"}
+
+ eval func_run_hooks func_options \
+ ${func_validate_options_result+"$func_validate_options_result"}
+
+ # save modified positional parameters for caller
+ func_options_result=$func_run_hooks_result
}
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters. If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
{
- case $1 in
- *[\\\`\"\$]*)
- func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
- *)
- func_quote_for_eval_unquoted_result="$1" ;;
- esac
+ $debug_cmd
- case $func_quote_for_eval_unquoted_result in
- # Double-quote args containing shell metacharacters to delay
- # word splitting, command substitution and and variable
- # expansion for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
- ;;
- *)
- func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
- esac
+ # Option defaults:
+ opt_verbose=false
+ opt_warning_types=
+
+ func_run_hooks func_options_prep ${1+"$@"}
+
+ # save modified positional parameters for caller
+ func_options_prep_result=$func_run_hooks_result
}
-# func_quote_for_expand arg
-# Aesthetically quote ARG to be evaled later; same as above,
-# but do not quote variable references.
-func_quote_for_expand ()
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
{
- case $1 in
- *[\\\`\"]*)
- my_arg=`$ECHO "$1" | $SED \
- -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
- *)
- my_arg="$1" ;;
- esac
+ $debug_cmd
- case $my_arg in
- # Double-quote args containing shell metacharacters to delay
- # word splitting and command substitution for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- my_arg="\"$my_arg\""
- ;;
- esac
+ func_parse_options_result=
- func_quote_for_expand_result="$my_arg"
-}
+ # this just eases exit handling
+ while test $# -gt 0; do
+ # Defer to hook functions for initial option parsing, so they
+ # get priority in the event of reusing an option name.
+ func_run_hooks func_parse_options ${1+"$@"}
+ # Adjust func_parse_options positional parameters to match
+ eval set dummy "$func_run_hooks_result"; shift
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.
-func_show_eval ()
-{
- my_cmd="$1"
- my_fail_exp="${2-:}"
+ # Break out of the loop if we already parsed every option.
+ test $# -gt 0 || break
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --debug|-x) debug_cmd='set -x'
+ func_echo "enabling shell trace mode"
+ $debug_cmd
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ set dummy --warnings none ${1+"$@"}
+ shift
+ ;;
- if ${opt_dry_run-false}; then :; else
- eval "$my_cmd"
- my_status=$?
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
- fi
+ --warnings|--warning|-W)
+ test $# = 0 && func_missing_arg $_G_opt && break
+ case " $warning_categories $1" in
+ *" $1 "*)
+ # trailing space prevents matching last $1 above
+ func_append_uniq opt_warning_types " $1"
+ ;;
+ *all)
+ opt_warning_types=$warning_categories
+ ;;
+ *none)
+ opt_warning_types=none
+ warning_func=:
+ ;;
+ *error)
+ opt_warning_types=$warning_categories
+ warning_func=func_fatal_error
+ ;;
+ *)
+ func_fatal_error \
+ "unsupported warning category: '$1'"
+ ;;
+ esac
+ shift
+ ;;
+
+ --verbose|-v) opt_verbose=: ;;
+ --version) func_version ;;
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+
+ # Separate optargs to long options (plugins may need this):
+ --*=*) func_split_equals "$_G_opt"
+ set dummy "$func_split_equals_lhs" \
+ "$func_split_equals_rhs" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate optargs to short options:
+ -W*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-v*|-x*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognised option: '$_G_opt'" ;;
+ *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ func_parse_options_result=$func_quote_for_eval_result
}
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it. Use the saved locale for evaluation.
-func_show_eval_locale ()
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
{
- my_cmd="$1"
- my_fail_exp="${2-:}"
+ $debug_cmd
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
+ # Display all warnings if -W was not given.
+ test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
- if ${opt_dry_run-false}; then :; else
- eval "$lt_user_locale
- $my_cmd"
- my_status=$?
- eval "$lt_safe_locale"
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
- fi
-}
+ func_run_hooks func_validate_options ${1+"$@"}
-# func_tr_sh
-# Turn $1 into a string suitable for a shell variable name.
-# Result is stored in $func_tr_sh_result. All characters
-# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-# if $1 begins with a digit, a '_' is prepended as well.
-func_tr_sh ()
-{
- case $1 in
- [0-9]* | *[!a-zA-Z0-9_]*)
- func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
- ;;
- * )
- func_tr_sh_result=$1
- ;;
- esac
+ # Bail if the options were screwed!
+ $exit_cmd $EXIT_FAILURE
+
+ # save modified positional parameters for caller
+ func_validate_options_result=$func_run_hooks_result
}
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
-{
- $opt_debug
- $SED -n '/(C)/!b go
- :more
- /\./!{
- N
- s/\n# / /
- b more
- }
- :go
- /^# '$PROGRAM' (GNU /,/# warranty; / {
- s/^# //
- s/^# *$//
- s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
- p
- }' < "$progpath"
- exit $?
-}
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
{
- $opt_debug
+ $debug_cmd
- $SED -n '/^# Usage:/,/^# *.*--help/ {
- s/^# //
- s/^# *$//
- s/\$progname/'$progname'/
- p
- }' < "$progpath"
- echo
- $ECHO "run \`$progname --help | more' for full usage"
- exit $?
+ eval \$ECHO \""Usage: $usage"\"
+ eval \$ECHO \""$fatal_help"\"
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
}
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
func_help ()
{
- $opt_debug
-
- $SED -n '/^# Usage:/,/# Report bugs to/ {
- :print
- s/^# //
- s/^# *$//
- s*\$progname*'$progname'*
- s*\$host*'"$host"'*
- s*\$SHELL*'"$SHELL"'*
- s*\$LTCC*'"$LTCC"'*
- s*\$LTCFLAGS*'"$LTCFLAGS"'*
- s*\$LD*'"$LD"'*
- s/\$with_gnu_ld/'"$with_gnu_ld"'/
- s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
- s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
- p
- d
- }
- /^# .* home page:/b print
- /^# General help using/b print
- ' < "$progpath"
- ret=$?
- if test -z "$1"; then
- exit $ret
- fi
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "$long_help_message"
+ exit 0
}
-# func_missing_arg argname
+
+# func_missing_arg ARGNAME
+# ------------------------
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
- $opt_debug
+ $debug_cmd
- func_error "missing argument for $1."
+ func_error "Missing argument for '$1'."
exit_cmd=exit
}
-# func_split_short_opt shortopt
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=${1%%=*}
+ func_split_equals_rhs=${1#*=}
+ test "x$func_split_equals_lhs" = "x$1" \
+ && func_split_equals_rhs=
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+ func_split_equals_rhs=
+ test "x$func_split_equals_lhs" = "x$1" \
+ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+ }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
# Set func_split_short_opt_name and func_split_short_opt_arg shell
# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+ func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+ }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
{
- my_sed_short_opt='1s/^\(..\).*$/\1/;q'
- my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+ $debug_cmd
- func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
- func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
+ func_usage_message
+ $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+ exit 0
+}
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
{
- my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
- my_sed_long_arg='1s/^--[^=]*=//'
+ $debug_cmd
- func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
- func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
+ eval \$ECHO \""Usage: $usage"\"
+ echo
+ $SED -n 's|^# ||
+ /^Written by/{
+ x;p;x
+ }
+ h
+ /^Written by/q' < "$progpath"
+ echo
+ eval \$ECHO \""$usage_message"\"
+}
-exit_cmd=:
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $debug_cmd
+ printf '%s\n' "$progname $scriptversion"
+ $SED -n '
+ /(C)/!b go
+ :more
+ /\./!{
+ N
+ s|\n# | |
+ b more
+ }
+ :go
+ /^# Written by /,/# warranty; / {
+ s|^# ||
+ s|^# *$||
+ s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+ p
+ }
+ /^# Written by / {
+ s|^# ||
+ p
+ }
+ /^warranty; /q' < "$progpath"
+ exit $?
+}
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
{
- eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
+ $debug_cmd
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
- func_quote_for_eval "${2}"
- eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
+ _G_message=$*
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
-# func_arith arithmetic-term...
-func_arith ()
+
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
{
- func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
+ $debug_cmd
+ $warning_func ${1+"$@"}
+}
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+ --config show all configuration variables
+ --debug enable verbose shell tracing
+ -n, --dry-run display commands without modifying any files
+ --features display basic configuration information and exit
+ --mode=MODE use operation mode MODE
+ --no-warnings equivalent to '-Wnone'
+ --preserve-dup-deps don't remove duplicate dependency libraries
+ --quiet, --silent don't print informational messages
+ --tag=TAG use configuration variables from tag TAG
+ -v, --verbose print more informational messages than default
+ --version print version information
+ -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all]
+ -h, --help, --help-all print short, long, or detailed help message
+"
-# func_lo2o object
-func_lo2o ()
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
{
- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+ clean remove files from the build directory
+ compile compile a source file into a libtool object
+ execute automatically set library path, then run a program
+ finish complete the installation of libtool libraries
+ install install libraries or executables
+ link create a library or an executable
+ uninstall remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE. When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+ host-triplet: $host
+ shell: $SHELL
+ compiler: $LTCC
+ compiler flags: $LTCFLAGS
+ linker: $LD (gnu? $with_gnu_ld)
+ version: $progname $scriptversion Debian-2.4.6-2
+ automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+ autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/s/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+ exit 0
+}
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_lo2o ()
+ {
+ case $1 in
+ *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+ * ) func_lo2o_result=$1 ;;
+ esac
+ }'
+
+ # func_xform LIBOBJ-OR-SOURCE
+ # ---------------------------
+ # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+ # suffix to a '.lo' libtool-object suffix.
+ eval 'func_xform ()
+ {
+ func_xform_result=${1%.*}.lo
+ }'
+else
+ # ...otherwise fall back to using sed.
+ func_lo2o ()
+ {
+ func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+ }
+
+ func_xform ()
+ {
+ func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+ }
+fi
-# func_fatal_configuration arg...
+# func_fatal_configuration ARG...
+# -------------------------------
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
func_fatal_configuration ()
{
- func_error ${1+"$@"}
- func_error "See the $PACKAGE documentation for more information."
- func_fatal_error "Fatal configuration error."
+ func__fatal_error ${1+"$@"} \
+ "See the $PACKAGE documentation for more information." \
+ "Fatal configuration error."
}
# func_config
+# -----------
# Display the configuration for all the tags in this script.
func_config ()
{
exit $?
}
+
# func_features
+# -------------
# Display the features supported by this script.
func_features ()
{
echo "host: $host"
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
echo "enable shared libraries"
else
echo "disable shared libraries"
fi
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
echo "enable static libraries"
else
echo "disable static libraries"
exit $?
}
-# func_enable_tag tagname
+
+# func_enable_tag TAGNAME
+# -----------------------
# Verify that TAGNAME is valid, and either flag an error and exit, or
# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
# variable here.
func_enable_tag ()
{
- # Global variable:
- tagname="$1"
+ # Global variable:
+ tagname=$1
- re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
- re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
- sed_extractcf="/$re_begincf/,/$re_endcf/p"
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf=/$re_begincf/,/$re_endcf/p
- # Validate tagname.
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- func_fatal_error "invalid tag name: $tagname"
- ;;
- esac
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
- # Don't test for the "default" C tag, as we know it's
- # there but not specially marked.
- case $tagname in
- CC) ;;
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
*)
- if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
- taglist="$taglist $tagname"
-
- # Evaluate the configuration. Be careful to quote the path
- # and the sed script, to avoid splitting on whitespace, but
- # also don't use non-portable quotes within backquotes within
- # quotes we have to do it in 2 steps:
- extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
- eval "$extractedcf"
- else
- func_error "ignoring unknown tag $tagname"
- fi
- ;;
- esac
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
}
+
# func_check_version_match
+# ------------------------
# Ensure that we are using m4 macros, and libtool script from the same
# release of libtool.
func_check_version_match ()
{
- if test "$package_revision" != "$macro_revision"; then
- if test "$VERSION" != "$macro_version"; then
- if test -z "$macro_version"; then
- cat >&2 <<_LT_EOF
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from an older release.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
- else
- cat >&2 <<_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
- fi
- else
- cat >&2 <<_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
$progname: of $PACKAGE $VERSION and run autoconf again.
_LT_EOF
- fi
+ fi
- exit $EXIT_MISMATCH
- fi
+ exit $EXIT_MISMATCH
+ fi
}
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
- shift; set dummy --mode clean ${1+"$@"}; shift
- ;;
-compile|compil|compi|comp|com|co|c)
- shift; set dummy --mode compile ${1+"$@"}; shift
- ;;
-execute|execut|execu|exec|exe|ex|e)
- shift; set dummy --mode execute ${1+"$@"}; shift
- ;;
-finish|finis|fini|fin|fi|f)
- shift; set dummy --mode finish ${1+"$@"}; shift
- ;;
-install|instal|insta|inst|ins|in|i)
- shift; set dummy --mode install ${1+"$@"}; shift
- ;;
-link|lin|li|l)
- shift; set dummy --mode link ${1+"$@"}; shift
- ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
- shift; set dummy --mode uninstall ${1+"$@"}; shift
- ;;
-esac
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+ $debug_mode
+ # Option defaults:
+ opt_config=false
+ opt_dlopen=
+ opt_dry_run=false
+ opt_help=false
+ opt_mode=
+ opt_preserve_dup_deps=false
+ opt_quiet=false
+ nonopt=
+ preserve_args=
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+ esac
+
+ # Pass back the list of options.
+ func_quote_for_eval ${1+"$@"}
+ libtool_options_prep_result=$func_quote_for_eval_result
+}
+func_add_hook func_options_prep libtool_options_prep
-# Parse options once, thoroughly. This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
{
- # this just eases exit handling
- while test $# -gt 0; do
- opt="$1"
- shift
- case $opt in
- --debug|-x) opt_debug='set -x'
- func_echo "enabling shell trace mode"
- $opt_debug
- ;;
- --dry-run|--dryrun|-n)
- opt_dry_run=:
- ;;
- --config)
- opt_config=:
-func_config
- ;;
- --dlopen|-dlopen)
- optarg="$1"
- opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
- shift
- ;;
- --preserve-dup-deps)
- opt_preserve_dup_deps=:
- ;;
- --features)
- opt_features=:
-func_features
- ;;
- --finish)
- opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
- ;;
- --help)
- opt_help=:
- ;;
- --help-all)
- opt_help_all=:
-opt_help=': help-all'
- ;;
- --mode)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_mode="$optarg"
-case $optarg in
- # Valid mode arguments:
- clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
- # Catch anything else as an error
- *) func_error "invalid argument for $opt"
- exit_cmd=exit
- break
- ;;
-esac
- shift
- ;;
- --no-silent|--no-quiet)
- opt_silent=false
-func_append preserve_args " $opt"
- ;;
- --no-warning|--no-warn)
- opt_warning=false
-func_append preserve_args " $opt"
- ;;
- --no-verbose)
- opt_verbose=false
-func_append preserve_args " $opt"
- ;;
- --silent|--quiet)
- opt_silent=:
-func_append preserve_args " $opt"
- opt_verbose=false
- ;;
- --verbose|-v)
- opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
- ;;
- --tag)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
- shift
- ;;
-
- -\?|-h) func_usage ;;
- --help) func_help ;;
- --version) func_version ;;
-
- # Separate optargs to long options:
- --*=*)
- func_split_long_opt "$opt"
- set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
- shift
- ;;
-
- # Separate non-argument short options:
- -\?*|-h*|-n*|-v*)
- func_split_short_opt "$opt"
- set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
- shift
- ;;
-
- --) break ;;
- -*) func_fatal_help "unrecognized option \`$opt'" ;;
- *) set dummy "$opt" ${1+"$@"}; shift; break ;;
- esac
- done
+ $debug_cmd
- # Validate options:
+ # Perform our own loop to consume as many options as possible in
+ # each iteration.
+ while test $# -gt 0; do
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+
+ --config) func_config ;;
+
+ --dlopen|-dlopen)
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+ shift
+ ;;
+
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=: ;;
+
+ --features) func_features ;;
+
+ --finish) set dummy --mode finish ${1+"$@"}; shift ;;
+
+ --help) opt_help=: ;;
+
+ --help-all) opt_help=': help-all' ;;
+
+ --mode) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_mode=$1
+ case $1 in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $_G_opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+ shift
+ ;;
+
+ --no-silent|--no-quiet)
+ opt_quiet=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ opt_warning=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-verbose)
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --silent|--quiet)
+ opt_quiet=:
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --tag) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_tag=$1
+ func_append preserve_args " $_G_opt $1"
+ func_enable_tag "$1"
+ shift
+ ;;
+
+ --verbose|-v) opt_quiet=false
+ opt_verbose=:
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ # An option not handled by this hook function:
+ *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
- # save first non-option argument
- if test "$#" -gt 0; then
- nonopt="$opt"
- shift
- fi
- # preserve --debug
- test "$opt_debug" = : || func_append preserve_args " --debug"
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
- case $host in
- *cygwin* | *mingw* | *pw32* | *cegcc*)
- # don't eliminate duplications in $postdeps and $predeps
- opt_duplicate_compiler_generated_deps=:
- ;;
- *)
- opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
- ;;
- esac
- $opt_help || {
- # Sanity checks first:
- func_check_version_match
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- func_fatal_configuration "not configured to build any kind of library"
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+ # save first non-option argument
+ if test 0 -lt $#; then
+ nonopt=$1
+ shift
fi
- # Darwin sucks
- eval std_shrext=\"$shrext_cmds\"
+ # preserve --debug
+ test : = "$debug_cmd" || func_append preserve_args " --debug"
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
- func_error "unrecognized option \`-dlopen'"
- $ECHO "$help" 1>&2
- exit $EXIT_FAILURE
- fi
+ case $host in
+ # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+ # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+ *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$progname --help --mode=$opt_mode' for more information."
- }
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ test yes != "$build_libtool_libs" \
+ && test yes != "$build_old_libs" \
+ && func_fatal_configuration "not configured to build any kind of library"
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+ func_error "unrecognized option '-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ # Change the help message to a mode-specific one.
+ generic_help=$help
+ help="Try '$progname --help --mode=$opt_mode' for more information."
+ }
- # Bail if the options were screwed
- $exit_cmd $EXIT_FAILURE
+ # Pass back the unparsed argument list
+ func_quote_for_eval ${1+"$@"}
+ libtool_validate_options_result=$func_quote_for_eval_result
}
+func_add_hook func_validate_options libtool_validate_options
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
## ----------- ##
## Main. ##
## ----------- ##
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+ $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_lalib_p ()
{
test -f "$1" &&
- $SED -e 4q "$1" 2>/dev/null \
- | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+ $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function implements the same check as func_lalib_p without
# resorting to external programs. To this end, it redirects stdin and
# closes it afterwards, without saving the original file descriptor.
# As a safety measure, use it only where a negative result would be
-# fatal anyway. Works if `file' does not exist.
+# fatal anyway. Works if 'file' does not exist.
func_lalib_unsafe_p ()
{
lalib_p=no
for lalib_p_l in 1 2 3 4
do
read lalib_p_line
- case "$lalib_p_line" in
+ case $lalib_p_line in
\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
esac
done
exec 0<&5 5<&-
fi
- test "$lalib_p" = yes
+ test yes = "$lalib_p"
}
# func_ltwrapper_script_p file
# determined imposters.
func_ltwrapper_script_p ()
{
- func_lalib_p "$1"
+ test -f "$1" &&
+ $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_ltwrapper_executable_p file
{
func_dirname_and_basename "$1" "" "."
func_stripname '' '.exe' "$func_basename_result"
- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
}
# func_ltwrapper_p file
# FAIL_CMD may read-access the current command in variable CMD!
func_execute_cmds ()
{
- $opt_debug
+ $debug_cmd
+
save_ifs=$IFS; IFS='~'
for cmd in $1; do
- IFS=$save_ifs
+ IFS=$sp$nl
eval cmd=\"$cmd\"
+ IFS=$save_ifs
func_show_eval "$cmd" "${2-:}"
done
IFS=$save_ifs
# Note that it is not necessary on cygwin/mingw to append a dot to
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)! Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
+# 'FILE.' does not work on cygwin managed mounts.
func_source ()
{
- $opt_debug
+ $debug_cmd
+
case $1 in
*/* | *\\*) . "$1" ;;
*) . "./$1" ;;
# store the result into func_replace_sysroot_result.
func_replace_sysroot ()
{
- case "$lt_sysroot:$1" in
+ case $lt_sysroot:$1 in
?*:"$lt_sysroot"*)
func_stripname "$lt_sysroot" '' "$1"
- func_replace_sysroot_result="=$func_stripname_result"
+ func_replace_sysroot_result='='$func_stripname_result
;;
*)
# Including no sysroot.
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
- $opt_debug
+ $debug_cmd
+
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
for z in $available_tags; do
if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
# Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
# line option must be used.
if test -z "$tagname"; then
func_echo "unable to infer tagged configuration"
- func_fatal_error "specify a tag with \`--tag'"
+ func_fatal_error "specify a tag with '--tag'"
# else
# func_verbose "using $tagname tagged configuration"
fi
# but don't create it if we're doing a dry run.
func_write_libtool_object ()
{
- write_libobj=${1}
- if test "$build_libtool_libs" = yes; then
- write_lobj=\'${2}\'
+ write_libobj=$1
+ if test yes = "$build_libtool_libs"; then
+ write_lobj=\'$2\'
else
write_lobj=none
fi
- if test "$build_old_libs" = yes; then
- write_oldobj=\'${3}\'
+ if test yes = "$build_old_libs"; then
+ write_oldobj=\'$3\'
else
write_oldobj=none
fi
$opt_dry_run || {
cat >${write_libobj}T <<EOF
# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
non_pic_object=$write_oldobj
EOF
- $MV "${write_libobj}T" "${write_libobj}"
+ $MV "${write_libobj}T" "$write_libobj"
}
}
# be empty on error (or when ARG is empty)
func_convert_core_file_wine_to_w32 ()
{
- $opt_debug
- func_convert_core_file_wine_to_w32_result="$1"
+ $debug_cmd
+
+ func_convert_core_file_wine_to_w32_result=$1
if test -n "$1"; then
# Unfortunately, winepath does not exit with a non-zero error code, so we
# are forced to check the contents of stdout. On the other hand, if the
# *an error message* to stdout. So we must check for both error code of
# zero AND non-empty stdout, which explains the odd construction:
func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
- if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
- $SED -e "$lt_sed_naive_backslashify"`
+ $SED -e "$sed_naive_backslashify"`
else
func_convert_core_file_wine_to_w32_result=
fi
# are convertible, then the result may be empty.
func_convert_core_path_wine_to_w32 ()
{
- $opt_debug
+ $debug_cmd
+
# unfortunately, winepath doesn't convert paths, only file names
- func_convert_core_path_wine_to_w32_result=""
+ func_convert_core_path_wine_to_w32_result=
if test -n "$1"; then
oldIFS=$IFS
IFS=:
for func_convert_core_path_wine_to_w32_f in $1; do
IFS=$oldIFS
func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
- if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -n "$func_convert_core_file_wine_to_w32_result"; then
if test -z "$func_convert_core_path_wine_to_w32_result"; then
- func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
else
func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
fi
# environment variable; do not put it in $PATH.
func_cygpath ()
{
- $opt_debug
+ $debug_cmd
+
if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
if test "$?" -ne 0; then
fi
else
func_cygpath_result=
- func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
fi
}
#end: func_cygpath
# result in func_convert_core_msys_to_w32_result.
func_convert_core_msys_to_w32 ()
{
- $opt_debug
+ $debug_cmd
+
# awkward: cmd appends spaces to result
func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+ $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
}
#end: func_convert_core_msys_to_w32
# func_to_host_file_result to ARG1).
func_convert_file_check ()
{
- $opt_debug
- if test -z "$2" && test -n "$1" ; then
+ $debug_cmd
+
+ if test -z "$2" && test -n "$1"; then
func_error "Could not determine host file name corresponding to"
- func_error " \`$1'"
+ func_error " '$1'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback:
- func_to_host_file_result="$1"
+ func_to_host_file_result=$1
fi
}
# end func_convert_file_check
# func_to_host_file_result to a simplistic fallback value (see below).
func_convert_path_check ()
{
- $opt_debug
+ $debug_cmd
+
if test -z "$4" && test -n "$3"; then
func_error "Could not determine the host path corresponding to"
- func_error " \`$3'"
+ func_error " '$3'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback. This is a deliberately simplistic "conversion" and
# should not be "improved". See libtool.info.
func_to_host_path_result=`echo "$3" |
$SED -e "$lt_replace_pathsep_chars"`
else
- func_to_host_path_result="$3"
+ func_to_host_path_result=$3
fi
fi
}
# and appending REPL if ORIG matches BACKPAT.
func_convert_path_front_back_pathsep ()
{
- $opt_debug
+ $debug_cmd
+
case $4 in
- $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ $1 ) func_to_host_path_result=$3$func_to_host_path_result
;;
esac
case $4 in
##################################################
# $build to $host FILE NAME CONVERSION FUNCTIONS #
##################################################
-# invoked via `$to_host_file_cmd ARG'
+# invoked via '$to_host_file_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# Result will be available in $func_to_host_file_result.
# in func_to_host_file_result.
func_to_host_file ()
{
- $opt_debug
+ $debug_cmd
+
$to_host_file_cmd "$1"
}
# end func_to_host_file
# in (the comma separated) LAZY, no conversion takes place.
func_to_tool_file ()
{
- $opt_debug
+ $debug_cmd
+
case ,$2, in
*,"$to_tool_file_cmd",*)
func_to_tool_file_result=$1
# Copy ARG to func_to_host_file_result.
func_convert_file_noop ()
{
- func_to_host_file_result="$1"
+ func_to_host_file_result=$1
}
# end func_convert_file_noop
# func_to_host_file_result.
func_convert_file_msys_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result=$func_convert_core_msys_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# func_to_host_file_result.
func_convert_file_cygwin_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
# because $build is cygwin, we call "the" cygpath in $PATH; no need to use
# LT_CYGPATH in this case.
# and a working winepath. Returns result in func_to_host_file_result.
func_convert_file_nix_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_file_wine_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# Returns result in func_to_host_file_result.
func_convert_file_msys_to_cygwin ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
func_cygpath -u "$func_convert_core_msys_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
+ func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# in func_to_host_file_result.
func_convert_file_nix_to_cygwin ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
# convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
func_convert_core_file_wine_to_w32 "$1"
func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
+ func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
#############################################
# $build to $host PATH CONVERSION FUNCTIONS #
#############################################
-# invoked via `$to_host_path_cmd ARG'
+# invoked via '$to_host_path_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# The result will be available in $func_to_host_path_result.
to_host_path_cmd=
func_init_to_host_path_cmd ()
{
- $opt_debug
+ $debug_cmd
+
if test -z "$to_host_path_cmd"; then
func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
- to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ to_host_path_cmd=func_convert_path_$func_stripname_result
fi
}
# in func_to_host_path_result.
func_to_host_path ()
{
- $opt_debug
+ $debug_cmd
+
func_init_to_host_path_cmd
$to_host_path_cmd "$1"
}
# Copy ARG to func_to_host_path_result.
func_convert_path_noop ()
{
- func_to_host_path_result="$1"
+ func_to_host_path_result=$1
}
# end func_convert_path_noop
# func_to_host_path_result.
func_convert_path_msys_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from ARG. MSYS
# behavior is inconsistent here; cygpath turns them into '.;' and ';.';
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result=$func_convert_core_msys_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
# func_to_host_file_result.
func_convert_path_cygwin_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
# a working winepath. Returns result in func_to_host_file_result.
func_convert_path_nix_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
# Returns result in func_to_host_file_result.
func_convert_path_msys_to_cygwin ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
+ func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
# func_to_host_file_result.
func_convert_path_nix_to_cygwin ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from
# ARG. msys behavior is inconsistent here, cygpath turns them
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
+ func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
# end func_convert_path_nix_to_cygwin
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+ $debug_cmd
+
+ func_dll_def_p_tmp=`$SED -n \
+ -e 's/^[ ]*//' \
+ -e '/^\(;.*\)*$/d' \
+ -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \
+ -e q \
+ "$1"`
+ test DEF = "$func_dll_def_p_tmp"
+}
+
+
# func_mode_compile arg...
func_mode_compile ()
{
- $opt_debug
+ $debug_cmd
+
# Get the compilation command and the source file.
base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ srcfile=$nonopt # always keep a non-empty value in "srcfile"
suppress_opt=yes
suppress_output=
arg_mode=normal
case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
- lastarg="$arg"
+ lastarg=$arg
arg_mode=normal
;;
target )
- libobj="$arg"
+ libobj=$arg
arg_mode=normal
continue
;;
case $arg in
-o)
test -n "$libobj" && \
- func_fatal_error "you cannot specify \`-o' more than once"
+ func_fatal_error "you cannot specify '-o' more than once"
arg_mode=target
continue
;;
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
lastarg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for arg in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_append_quoted lastarg "$arg"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$lastarg"
lastarg=$func_stripname_result
# Accept the current argument as the source file.
# The previous "srcfile" becomes the current argument.
#
- lastarg="$srcfile"
- srcfile="$arg"
+ lastarg=$srcfile
+ srcfile=$arg
;;
esac # case $arg
;;
func_fatal_error "you must specify an argument for -Xcompile"
;;
target)
- func_fatal_error "you must specify a target with \`-o'"
+ func_fatal_error "you must specify a target with '-o'"
;;
*)
# Get the name of the library object.
test -z "$libobj" && {
func_basename "$srcfile"
- libobj="$func_basename_result"
+ libobj=$func_basename_result
}
;;
esac
case $libobj in
*.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
*)
- func_fatal_error "cannot determine name of library object from \`$libobj'"
+ func_fatal_error "cannot determine name of library object from '$libobj'"
;;
esac
for arg in $later; do
case $arg in
-shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
+ test yes = "$build_libtool_libs" \
+ || func_fatal_configuration "cannot build a shared library"
build_old_libs=no
continue
;;
func_quote_for_eval "$libobj"
test "X$libobj" != "X$func_quote_for_eval_result" \
&& $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ && func_warning "libobj name '$libobj' may not contain shell special characters."
func_dirname_and_basename "$obj" "/" ""
- objname="$func_basename_result"
- xdir="$func_dirname_result"
- lobj=${xdir}$objdir/$objname
+ objname=$func_basename_result
+ xdir=$func_dirname_result
+ lobj=$xdir$objdir/$objname
test -z "$base_compile" && \
func_fatal_help "you must specify a compilation command"
# Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
removelist="$obj $lobj $libobj ${libobj}T"
else
removelist="$lobj $libobj ${libobj}T"
pic_mode=default
;;
esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
# non-PIC code in shared libraries is not supported
pic_mode=default
fi
# Calculate the filename of the output object if compiler does
# not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
+ if test no = "$compiler_c_o"; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+ lockfile=$output_obj.lock
else
output_obj=
need_locks=no
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
+ if test yes = "$need_locks"; then
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
sleep 2
done
- elif test "$need_locks" = warn; then
+ elif test warn = "$need_locks"; then
if test -f "$lockfile"; then
$ECHO "\
*** ERROR, $lockfile exists and contains:
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
qsrcfile=$func_quote_for_eval_result
# Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
# Without this assignment, base_compile gets emptied.
fbsd_hideous_sh_bug=$base_compile
- if test "$pic_mode" != no; then
+ if test no != "$pic_mode"; then
command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
func_show_eval_locale "$command" \
'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
- if test "$need_locks" = warn &&
+ if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
fi
# Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
+ if test yes = "$suppress_opt"; then
suppress_output=' >/dev/null 2>&1'
fi
fi
# Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
+ if test yes = "$build_old_libs"; then
+ if test yes != "$pic_mode"; then
# Don't build PIC code
command="$base_compile $qsrcfile$pie_flag"
else
command="$base_compile $qsrcfile $pic_flag"
fi
- if test "$compiler_c_o" = yes; then
+ if test yes = "$compiler_c_o"; then
func_append command " -o $obj"
fi
func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
- if test "$need_locks" = warn &&
+ if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
# Unlock the critical section if it was locked
- if test "$need_locks" != no; then
+ if test no != "$need_locks"; then
removelist=$lockfile
$RM "$lockfile"
fi
}
$opt_help || {
- test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+ test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
}
func_mode_help ()
Remove files from the build directory.
RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, object or program, all the files associated
-no-suppress do not suppress compiler output for multiple passes
-prefer-pic try to build PIC objects only
-prefer-non-pic try to build non-PIC objects only
- -shared do not build a \`.o' file suitable for static linking
- -static only build a \`.o' file suitable for static linking
+ -shared do not build a '.o' file suitable for static linking
+ -static only build a '.o' file suitable for static linking
-Wc,FLAG pass FLAG directly to the compiler
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
from the given SOURCEFILE.
The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
;;
execute)
-dlopen FILE add the directory containing FILE to the library path
-This mode sets the library path environment variable according to \`-dlopen'
+This mode sets the library path environment variable according to '-dlopen'
flags.
If any of the ARGS are libtool executable wrappers, then they are translated
Each LIBDIR is a directory that contains libtool libraries.
The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
+the '--dry-run' option if you just want to see what would be executed."
;;
install)
Install executables or libraries.
INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
+either the 'install' or 'cp' program.
The following components of INSTALL-COMMAND are treated specially:
-avoid-version do not add a version suffix if possible
-bindir BINDIR specify path to binaries directory (for systems where
libraries must be found in the PATH setting at runtime)
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
-no-install link a not-installable executable
-no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
+ -objectlist FILE use a list of object files found in FILE to specify objects
+ -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes)
-precious-files-regex REGEX
don't remove output files matching REGEX
-release RELEASE specify package release information
-Xlinker FLAG pass linker-specific FLAG directly to the linker
-XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
-All other options (arguments beginning with \`-') are ignored.
+All other options (arguments beginning with '-') are ignored.
-Every other argument is treated as a filename. Files ending in \`.la' are
+Every other argument is treated as a filename. Files ending in '.la' are
treated as uninstalled libtool libraries, other files are standard or library
object files.
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
required, except when creating a convenience library.
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
is created, otherwise an executable program is created."
;;
Remove libraries from an installation directory.
RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, all the files associated with it are deleted.
;;
*)
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode '$opt_mode'"
;;
esac
echo
- $ECHO "Try \`$progname --help' for more information about other modes."
+ $ECHO "Try '$progname --help' for more information about other modes."
}
# Now that we've collected a possible --mode arg, show help if necessary
if $opt_help; then
- if test "$opt_help" = :; then
+ if test : = "$opt_help"; then
func_mode_help
else
{
for opt_mode in compile link execute install finish uninstall clean; do
func_mode_help
done
- } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ } | $SED -n '1p; 2,$s/^Usage:/ or: /p'
{
func_help noexit
for opt_mode in compile link execute install finish uninstall clean; do
func_mode_help
done
} |
- sed '1d
+ $SED '1d
/^When reporting/,/^Report/{
H
d
# func_mode_execute arg...
func_mode_execute ()
{
- $opt_debug
+ $debug_cmd
+
# The first argument is the command name.
- cmd="$nonopt"
+ cmd=$nonopt
test -z "$cmd" && \
func_fatal_help "you must specify a COMMAND"
# Handle -dlopen flags immediately.
for file in $opt_dlopen; do
test -f "$file" \
- || func_fatal_help "\`$file' is not a file"
+ || func_fatal_help "'$file' is not a file"
dir=
case $file in
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$lib' is not a valid libtool archive"
+ || func_fatal_help "'$lib' is not a valid libtool archive"
# Read the libtool library.
dlname=
if test -z "$dlname"; then
# Warn if it was a shared library.
test -n "$library_names" && \
- func_warning "\`$file' was not linked with \`-export-dynamic'"
+ func_warning "'$file' was not linked with '-export-dynamic'"
continue
fi
func_dirname "$file" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
if test -f "$dir/$objdir/$dlname"; then
func_append dir "/$objdir"
else
if test ! -f "$dir/$dlname"; then
- func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
fi
fi
;;
*.lo)
# Just add the directory containing the .lo file.
func_dirname "$file" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
;;
*)
- func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
continue
;;
esac
# Get the absolute pathname.
absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
+ test -n "$absdir" && dir=$absdir
# Now add the directory to shlibpath_var.
if eval "test -z \"\$$shlibpath_var\""; then
# This variable tells wrapper scripts just to set shlibpath_var
# rather than running their programs.
- libtool_execute_magic="$magic"
+ libtool_execute_magic=$magic
# Check if any of the arguments is a wrapper script.
args=
if func_ltwrapper_script_p "$file"; then
func_source "$file"
# Transform arg to wrapped name.
- file="$progdir/$program"
+ file=$progdir/$program
elif func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
func_source "$func_ltwrapper_scriptname_result"
# Transform arg to wrapped name.
- file="$progdir/$program"
+ file=$progdir/$program
fi
;;
esac
func_append_quoted args "$file"
done
- if test "X$opt_dry_run" = Xfalse; then
+ if $opt_dry_run; then
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ else
if test -n "$shlibpath_var"; then
# Export the shlibpath_var.
eval "export $shlibpath_var"
done
# Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
- echo "export $shlibpath_var"
- fi
- $ECHO "$cmd$args"
- exit $EXIT_SUCCESS
+ exec_cmd=\$cmd$args
fi
}
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
# func_mode_finish arg...
func_mode_finish ()
{
- $opt_debug
+ $debug_cmd
+
libs=
libdirs=
admincmds=
if func_lalib_unsafe_p "$opt"; then
func_append libs " $opt"
else
- func_warning "\`$opt' is not a valid libtool archive"
+ func_warning "'$opt' is not a valid libtool archive"
fi
else
- func_fatal_error "invalid argument \`$opt'"
+ func_fatal_error "invalid argument '$opt'"
fi
done
# Remove sysroot references
if $opt_dry_run; then
for lib in $libs; do
- echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ echo "removing references to $lt_sysroot and '=' prefixes from $lib"
done
else
tmpdir=`func_mktempdir`
for lib in $libs; do
- sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
> $tmpdir/tmp-la
mv -f $tmpdir/tmp-la $lib
done
fi
# Exit here if they wanted silent mode.
- $opt_silent && exit $EXIT_SUCCESS
+ $opt_quiet && exit $EXIT_SUCCESS
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
echo "----------------------------------------------------------------------"
echo
echo "If you ever happen to want to link against installed libraries"
echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "specify the full pathname of the library, or use the '-LLIBDIR'"
echo "flag during linking and do at least one of the following:"
if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " - add LIBDIR to the '$shlibpath_var' environment variable"
echo " during execution"
fi
if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " - add LIBDIR to the '$runpath_var' environment variable"
echo " during linking"
fi
if test -n "$hardcode_libdir_flag_spec"; then
libdir=LIBDIR
eval flag=\"$hardcode_libdir_flag_spec\"
- $ECHO " - use the \`$flag' linker flag"
+ $ECHO " - use the '$flag' linker flag"
fi
if test -n "$admincmds"; then
$ECHO " - have your system administrator run these commands:$admincmds"
fi
if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
fi
echo
exit $EXIT_SUCCESS
}
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
# func_mode_install arg...
func_mode_install ()
{
- $opt_debug
+ $debug_cmd
+
# There may be an optional sh(1) argument at the beginning of
# install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
# Allow the use of GNU shtool's install command.
- case $nonopt in *shtool*) :;; *) false;; esac; then
+ case $nonopt in *shtool*) :;; *) false;; esac
+ then
# Aesthetically quote it.
func_quote_for_eval "$nonopt"
install_prog="$func_quote_for_eval_result "
opts=
prev=
install_type=
- isdir=no
+ isdir=false
stripme=
no_mode=:
for arg
fi
case $arg in
- -d) isdir=yes ;;
+ -d) isdir=: ;;
-f)
if $install_cp; then :; else
prev=$arg
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
- if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ if test X-m = "X$prev" && test -n "$install_override_mode"; then
arg2=$install_override_mode
no_mode=false
fi
func_fatal_help "you must specify an install program"
test -n "$prev" && \
- func_fatal_help "the \`$prev' option requires an argument"
+ func_fatal_help "the '$prev' option requires an argument"
if test -n "$install_override_mode" && $no_mode; then
if $install_cp; then :; else
dest=$func_stripname_result
# Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
+ test -d "$dest" && isdir=:
+ if $isdir; then
+ destdir=$dest
destname=
else
func_dirname_and_basename "$dest" "" "."
- destdir="$func_dirname_result"
- destname="$func_basename_result"
+ destdir=$func_dirname_result
+ destname=$func_basename_result
# Not a directory, so check to see that there is only one file specified.
set dummy $files; shift
test "$#" -gt 1 && \
- func_fatal_help "\`$dest' is not a directory"
+ func_fatal_help "'$dest' is not a directory"
fi
case $destdir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
case $file in
*.lo) ;;
*)
- func_fatal_help "\`$destdir' must be an absolute directory name"
+ func_fatal_help "'$destdir' must be an absolute directory name"
;;
esac
done
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
- libtool_install_magic="$magic"
+ libtool_install_magic=$magic
staticlibs=
future_libdirs=
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$file' is not a valid libtool archive"
+ || func_fatal_help "'$file' is not a valid libtool archive"
library_names=
old_library=
fi
func_dirname "$file" "/" ""
- dir="$func_dirname_result"
+ dir=$func_dirname_result
func_append dir "$objdir"
if test -n "$relink_command"; then
# are installed into $libdir/../bin (currently, that works fine)
# but it's something to keep an eye on.
test "$inst_prefix_dir" = "$destdir" && \
- func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+ func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
fi
- func_warning "relinking \`$file'"
+ func_warning "relinking '$file'"
func_show_eval "$relink_command" \
- 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
fi
# See the names of the shared library.
set dummy $library_names; shift
if test -n "$1"; then
- realname="$1"
+ realname=$1
shift
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
+ srcname=$realname
+ test -n "$relink_command" && srcname=${realname}T
# Install the shared library and build the symlinks.
func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
'exit $?'
- tstripme="$stripme"
+ tstripme=$stripme
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
case $realname in
*.dll.a)
- tstripme=""
+ tstripme=
+ ;;
+ esac
+ ;;
+ os2*)
+ case $realname in
+ *_dll.a)
+ tstripme=
;;
esac
;;
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
+ # Try 'ln -sf' first, because the 'ln' binary might depend on
# the symlink we replace! Solaris /bin/ln does not understand -f,
# so we also need to try rm && ln -s.
for linkname
fi
# Do each command in the postinstall commands.
- lib="$destdir/$realname"
+ lib=$destdir/$realname
func_execute_cmds "$postinstall_cmds" 'exit $?'
fi
# Install the pseudo-library for information purposes.
func_basename "$file"
- name="$func_basename_result"
- instname="$dir/$name"i
+ name=$func_basename_result
+ instname=$dir/${name}i
func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
# Maybe install the static library, too.
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
+ destfile=$destdir/$destname
else
func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
fi
# Deduce the name of the destination old-style object file.
staticdest=$func_lo2o_result
;;
*.$objext)
- staticdest="$destfile"
+ staticdest=$destfile
destfile=
;;
*)
- func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ func_fatal_help "cannot copy a libtool object to '$destfile'"
;;
esac
func_show_eval "$install_prog $file $destfile" 'exit $?'
# Install the old object if enabled.
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
# Deduce the name of the old-style object file.
func_lo2o "$file"
staticobj=$func_lo2o_result
*)
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
+ destfile=$destdir/$destname
else
func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
fi
# If the file is missing, and there is a .exe on the end, strip it
# because it is most likely a libtool script we actually want to
# install
- stripped_ext=""
+ stripped_ext=
case $file in
*.exe)
if test ! -f "$file"; then
func_stripname '' '.exe' "$file"
file=$func_stripname_result
- stripped_ext=".exe"
+ stripped_ext=.exe
fi
;;
esac
# Check the variables that should have been set.
test -z "$generated_by_libtool_version" && \
- func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+ func_fatal_error "invalid libtool wrapper script '$wrapper'"
- finalize=yes
+ finalize=:
for lib in $notinst_deplibs; do
# Check to see that each library is installed.
libdir=
if test -f "$lib"; then
func_source "$lib"
fi
- libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
if test -n "$libdir" && test ! -f "$libfile"; then
- func_warning "\`$lib' has not been installed in \`$libdir'"
- finalize=no
+ func_warning "'$lib' has not been installed in '$libdir'"
+ finalize=false
fi
done
func_source "$wrapper"
outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
+ if test no = "$fast_install" && test -n "$relink_command"; then
$opt_dry_run || {
- if test "$finalize" = yes; then
+ if $finalize; then
tmpdir=`func_mktempdir`
func_basename "$file$stripped_ext"
- file="$func_basename_result"
- outputname="$tmpdir/$file"
+ file=$func_basename_result
+ outputname=$tmpdir/$file
# Replace the output file specification.
relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
- $opt_silent || {
+ $opt_quiet || {
func_quote_for_expand "$relink_command"
eval "func_echo $func_quote_for_expand_result"
}
if eval "$relink_command"; then :
else
- func_error "error: relink \`$file' with the above command before installing it"
+ func_error "error: relink '$file' with the above command before installing it"
$opt_dry_run || ${RM}r "$tmpdir"
continue
fi
- file="$outputname"
+ file=$outputname
else
- func_warning "cannot relink \`$file'"
+ func_warning "cannot relink '$file'"
fi
}
else
for file in $staticlibs; do
func_basename "$file"
- name="$func_basename_result"
+ name=$func_basename_result
# Set up the ranlib parameters.
- oldlib="$destdir/$name"
+ oldlib=$destdir/$name
func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
tool_oldlib=$func_to_tool_file_result
done
test -n "$future_libdirs" && \
- func_warning "remember to run \`$progname --finish$future_libdirs'"
+ func_warning "remember to run '$progname --finish$future_libdirs'"
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
$opt_dry_run && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
else
exit $EXIT_SUCCESS
fi
}
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
# func_generate_dlsyms outputname originator pic_p
# a dlpreopen symbol table.
func_generate_dlsyms ()
{
- $opt_debug
- my_outputname="$1"
- my_originator="$2"
- my_pic_p="${3-no}"
- my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ $debug_cmd
+
+ my_outputname=$1
+ my_originator=$2
+ my_pic_p=${3-false}
+ my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
my_dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
if test -n "$NM" && test -n "$global_symbol_pipe"; then
- my_dlsyms="${my_outputname}S.c"
+ my_dlsyms=${my_outputname}S.c
else
func_error "not configured to extract global symbols from dlpreopened files"
fi
"") ;;
*.c)
# Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${my_outputname}.nm"
+ nlist=$output_objdir/$my_outputname.nm
func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
func_verbose "creating $output_objdir/$my_dlsyms"
$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
#ifdef __cplusplus
extern \"C\" {
#endif
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
#endif
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
# define LT_DLSYM_CONST const
#endif
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
/* External symbol declarations for the compiler. */\
"
- if test "$dlself" = yes; then
- func_verbose "generating symbol list for \`$output'"
+ if test yes = "$dlself"; then
+ func_verbose "generating symbol list for '$output'"
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
for progfile in $progfiles; do
func_to_tool_file "$progfile" func_convert_file_msys_to_w32
- func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
$opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
done
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
+ export_symbols=$output_objdir/$outputname.exp
$opt_dry_run || {
$RM $export_symbols
- eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
case $host in
*cygwin* | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
}
else
$opt_dry_run || {
- eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
case $host in
fi
for dlprefile in $dlprefiles; do
- func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_verbose "extracting global C symbols from '$dlprefile'"
func_basename "$dlprefile"
- name="$func_basename_result"
+ name=$func_basename_result
case $host in
*cygwin* | *mingw* | *cegcc* )
# if an import library, we need to obtain dlname
if func_win32_import_lib_p "$dlprefile"; then
func_tr_sh "$dlprefile"
eval "curr_lafile=\$libfile_$func_tr_sh_result"
- dlprefile_dlbasename=""
+ dlprefile_dlbasename=
if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
# Use subshell, to avoid clobbering current variable values
dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
- if test -n "$dlprefile_dlname" ; then
+ if test -n "$dlprefile_dlname"; then
func_basename "$dlprefile_dlname"
- dlprefile_dlbasename="$func_basename_result"
+ dlprefile_dlbasename=$func_basename_result
else
# no lafile. user explicitly requested -dlpreopen <import library>.
$sharedlib_from_linklib_cmd "$dlprefile"
fi
fi
$opt_dry_run || {
- if test -n "$dlprefile_dlbasename" ; then
+ if test -n "$dlprefile_dlbasename"; then
eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
else
func_warning "Could not compute DLL name from $name"
echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
fi
+ func_show_eval '$RM "${nlist}I"'
+ if test -n "$global_symbol_to_import"; then
+ eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+ fi
+
echo >> "$output_objdir/$my_dlsyms" "\
/* The mapping between symbol names and symbols. */
void *address;
} lt_dlsymlist;
extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+ LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+ for (; symbol->name; ++symbol)
+ {"
+ $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+ echo >> "$output_objdir/$my_dlsyms" "\
+ }
+}"
+ fi
+ echo >> "$output_objdir/$my_dlsyms" "\
LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
- { \"$my_originator\", (void *) 0 },"
+{ {\"$my_originator\", (void *) 0},"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {\"@INIT@\", (void *) <_syminit},"
+ fi
case $need_lib_prefix in
no)
*-*-hpux*)
pic_flag_for_symtable=" $pic_flag" ;;
*)
- if test "X$my_pic_p" != Xno; then
- pic_flag_for_symtable=" $pic_flag"
- fi
+ $my_pic_p && pic_flag_for_symtable=" $pic_flag"
;;
esac
;;
func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
# Clean up the generated files.
- func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
# Transform the symbol file into the correct name.
- symfileobj="$output_objdir/${my_outputname}S.$objext"
+ symfileobj=$output_objdir/${my_outputname}S.$objext
case $host in
*cygwin* | *mingw* | *cegcc* )
if test -f "$output_objdir/$my_outputname.def"; then
esac
;;
*)
- func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ func_fatal_error "unknown suffix for '$my_dlsyms'"
;;
esac
else
fi
}
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
# func_win32_libid arg
# return the library type of file 'arg'
#
# Despite the name, also deal with 64 bit binaries.
func_win32_libid ()
{
- $opt_debug
- win32_libid_type="unknown"
+ $debug_cmd
+
+ win32_libid_type=unknown
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
*ar\ archive\ import\ library*) # definitely import
# Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
$EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
- $SED -n -e '
+ case $nm_interface in
+ "MS dumpbin")
+ if func_cygming_ms_implib_p "$1" ||
+ func_cygming_gnu_implib_p "$1"
+ then
+ win32_nmres=import
+ else
+ win32_nmres=
+ fi
+ ;;
+ *)
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
1,100{
/ I /{
- s,.*,import,
+ s|.*|import|
p
q
}
}'`
+ ;;
+ esac
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib ()
{
- $opt_debug
+ $debug_cmd
+
sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
}
# specified import library.
func_cygming_dll_for_implib_fallback_core ()
{
- $opt_debug
+ $debug_cmd
+
match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
$OBJDUMP -s --section "$1" "$2" 2>/dev/null |
$SED '/^Contents of section '"$match_literal"':/{
/./p' |
# we now have a list, one entry per line, of the stringified
# contents of the appropriate section of all members of the
- # archive which possess that section. Heuristic: eliminate
- # all those which have a first or second character that is
+ # archive that possess that section. Heuristic: eliminate
+ # all those that have a first or second character that is
# a '.' (that is, objdump's representation of an unprintable
# character.) This should work for all archives with less than
# 0x302f exports -- but will fail for DLLs whose name actually
$SED -e '/^\./d;/^.\./d;q'
}
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
- test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
- test -n "$func_cygming_ms_implib_tmp"
-}
-
# func_cygming_dll_for_implib_fallback ARG
# Platform-specific function to extract the
# name of the DLL associated with the specified
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib_fallback ()
{
- $opt_debug
- if func_cygming_gnu_implib_p "$1" ; then
+ $debug_cmd
+
+ if func_cygming_gnu_implib_p "$1"; then
# binutils import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
- elif func_cygming_ms_implib_p "$1" ; then
+ elif func_cygming_ms_implib_p "$1"; then
# ms-generated import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
else
# unknown
- sharedlib_from_linklib_result=""
+ sharedlib_from_linklib_result=
fi
}
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
- $opt_debug
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
- if test "$lock_old_archive_extraction" = yes; then
+ $debug_cmd
+
+ f_ex_an_ar_dir=$1; shift
+ f_ex_an_ar_oldlib=$1
+ if test yes = "$lock_old_archive_extraction"; then
lockfile=$f_ex_an_ar_oldlib.lock
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
fi
func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
'stat=$?; rm -f "$lockfile"; exit $stat'
- if test "$lock_old_archive_extraction" = yes; then
+ if test yes = "$lock_old_archive_extraction"; then
$opt_dry_run || rm -f "$lockfile"
fi
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
- $opt_debug
- my_gentop="$1"; shift
+ $debug_cmd
+
+ my_gentop=$1; shift
my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
+ my_oldobjs=
+ my_xlib=
+ my_xabs=
+ my_xdir=
for my_xlib in $my_oldlibs; do
# Extract the objects.
case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
func_basename "$my_xlib"
- my_xlib="$func_basename_result"
+ my_xlib=$func_basename_result
my_xlib_u=$my_xlib
while :; do
case " $extracted_archives " in
esac
done
extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
+ my_xdir=$my_gentop/$my_xlib_u
func_mkdir_p "$my_xdir"
cd $my_xdir || exit $?
darwin_archive=$my_xabs
darwin_curdir=`pwd`
- darwin_base_archive=`basename "$darwin_archive"`
+ func_basename "$darwin_archive"
+ darwin_base_archive=$func_basename_result
darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
if test -n "$darwin_arches"; then
darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
darwin_arch=
func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ for darwin_arch in $darwin_arches; do
+ func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+ $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+ cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+ func_extract_an_archive "`pwd`" "$darwin_base_archive"
cd "$darwin_curdir"
- $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
done # $darwin_arches
## Okay now we've a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
done
- func_extract_archives_result="$my_oldobjs"
+ func_extract_archives_result=$my_oldobjs
}
#
# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
# variable will take. If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
+# will assume that the directory where it is stored is
# the $objdir directory. This is a cygwin/mingw-specific
# behavior.
func_emit_wrapper ()
#! $SHELL
# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
# Very basic option parsing. These options are (a) specific to
# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
+# /script/ and the wrapper /executable/ that is used only on
# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
+# (application programs are unlikely to have options that match
# this pattern).
#
# There are only two supported options: --lt-debug and
# Print the debug banner immediately:
if test -n \"\$lt_option_debug\"; then
- echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
fi
}
lt_dump_args_N=1;
for lt_arg
do
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
done
}
*-*-mingw | *-*-os2* | *-cegcc*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir/\$program\" \${1+\"\$@\"}
test -n \"\$absdir\" && thisdir=\"\$absdir\"
"
- if test "$fast_install" = yes; then
+ if test yes = "$fast_install"; then
$ECHO "\
program=lt-'$outputname'$exeext
progdir=\"\$thisdir/$objdir\"
if test ! -f \"\$progdir/\$program\" ||
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
file=\"\$\$-\$program\"
if test -n \"\$relink_command\"; then
if relink_command_output=\`eval \$relink_command 2>&1\`; then :
else
- $ECHO \"\$relink_command_output\" >&2
+ \$ECHO \"\$relink_command_output\" >&2
$RM \"\$progdir/\$file\"
exit 1
fi
fi
# Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
$ECHO "\
# Add our own library path to $shlibpath_var
$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
fi
else
# The program doesn't exist.
- \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
\$ECHO \"This script is just a wrapper for \$program.\" 1>&2
\$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
cat <<EOF
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+ Generated by $PROGRAM (GNU $PACKAGE) $VERSION
The $output program cannot be directly executed until all the libtool
libraries that it depends on are installed.
#include <fcntl.h>
#include <sys/stat.h>
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
+#if defined __MINGW32__
# ifdef __STRICT_ANSI__
int _putenv (const char *);
# endif
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
# ifdef __STRICT_ANSI__
char *realpath (const char *, char *);
int putenv (char *);
int setenv (const char *, const char *, int);
# endif
-/* #elif defined (other platforms) ... */
+/* #elif defined other_platform || defined ... */
#endif
/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
+#if defined _MSC_VER
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-# define _INTPTR_T_DEFINED
-# define intptr_t int
-# endif
-#elif defined(__MINGW32__)
+#elif defined __MINGW32__
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
# define HAVE_SETENV
# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
+/* #elif defined other platforms ... */
#endif
-#if defined(PATH_MAX)
+#if defined PATH_MAX
# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
+#elif defined MAXPATHLEN
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
# define PATH_SEPARATOR ':'
#endif
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+ defined __OS2__
# define HAVE_DOS_BASED_FILE_SYSTEM
# define FOPEN_WB "wb"
# ifndef DIR_SEPARATOR_2
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
+ if (stale) { free (stale); stale = 0; } \
} while (0)
-#if defined(LT_DEBUGWRAPPER)
+#if defined LT_DEBUGWRAPPER
static int lt_debug = 1;
#else
static int lt_debug = 0;
EOF
cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
const char * LIB_PATH_VARNAME = "$shlibpath_var";
EOF
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
func_to_host_path "$temp_rpath"
cat <<EOF
const char * LIB_PATH_VALUE = "$func_to_host_path_result";
EOF
fi
- if test "$fast_install" = yes; then
+ if test yes = "$fast_install"; then
cat <<EOF
const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
EOF
char *actual_cwrapper_name;
char *target_name;
char *lt_argv_zero;
- intptr_t rval = 127;
+ int rval = 127;
int i;
program_name = (char *) xstrdup (base_name (argv[0]));
- newargz = XMALLOC (char *, argc + 1);
+ newargz = XMALLOC (char *, (size_t) argc + 1);
/* very simple arg parsing; don't want to rely on getopt
* also, copy all non cwrapper options to newargz, except
newargc=0;
for (i = 1; i < argc; i++)
{
- if (strcmp (argv[i], dumpscript_opt) == 0)
+ if (STREQ (argv[i], dumpscript_opt))
{
EOF
- case "$host" in
+ case $host in
*mingw* | *cygwin* )
# make stdout use "unix" line endings
echo " setmode(1,_O_BINARY);"
lt_dump_script (stdout);
return 0;
}
- if (strcmp (argv[i], debug_opt) == 0)
+ if (STREQ (argv[i], debug_opt))
{
lt_debug = 1;
continue;
}
- if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ if (STREQ (argv[i], ltwrapper_option_prefix))
{
/* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
namespace, but it is not one of the ones we know about and
EOF
cat <<EOF
/* The GNU banner must be the first non-error debug message */
- lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
EOF
cat <<"EOF"
lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
cat <<"EOF"
/* execv doesn't actually work on mingw as expected on unix */
newargz = prepare_spawn (newargz);
- rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
if (rval == -1)
{
/* failed to start process */
{
const char *base;
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
/* Skip over the disk name in MSDOS pathnames. */
if (isalpha ((unsigned char) name[0]) && name[1] == ':')
name += 2;
const char *p_next;
/* static buffer for getcwd */
char tmp[LT_PATHMAX + 1];
- int tmp_len;
+ size_t tmp_len;
char *concat_name;
lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
return NULL;
/* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
{
concat_name = xstrdup (wrapper);
return concat_name;
XFREE (concat_name);
}
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
}
#endif
for (q = p; *q; q++)
if (IS_PATH_SEPARATOR (*q))
break;
- p_len = q - p;
+ p_len = (size_t) (q - p);
p_next = (*q == '\0' ? q : q + 1);
if (p_len == 0)
{
if (patlen <= len)
{
str += len - patlen;
- if (strcmp (str, pat) == 0)
+ if (STREQ (str, pat))
*str = '\0';
}
return str;
char *str = xstrdup (value);
setenv (name, str, 1);
#else
- int len = strlen (name) + 1 + strlen (value) + 1;
+ size_t len = strlen (name) + 1 + strlen (value) + 1;
char *str = XMALLOC (char, len);
sprintf (str, "%s=%s", name, value);
if (putenv (str) != EXIT_SUCCESS)
char *new_value;
if (orig_value && *orig_value)
{
- int orig_value_len = strlen (orig_value);
- int add_len = strlen (add);
+ size_t orig_value_len = strlen (orig_value);
+ size_t add_len = strlen (add);
new_value = XMALLOC (char, add_len + orig_value_len + 1);
if (to_end)
{
{
char *new_value = lt_extend_str (getenv (name), value, 0);
/* some systems can't cope with a ':'-terminated path #' */
- int len = strlen (new_value);
- while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ size_t len = strlen (new_value);
+ while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
{
- new_value[len-1] = '\0';
+ new_value[--len] = '\0';
}
lt_setenv (name, new_value);
XFREE (new_value);
# True if ARG is an import lib, as indicated by $file_magic_cmd
func_win32_import_lib_p ()
{
- $opt_debug
+ $debug_cmd
+
case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
*import*) : ;;
*) false ;;
esac
}
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+ $debug_cmd
+
+ case " $compile_command " in
+ *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+ suncc_use_cstd_abi=no
+ ;;
+ *)
+ suncc_use_cstd_abi=yes
+ ;;
+ esac
+}
+
# func_mode_link arg...
func_mode_link ()
{
- $opt_debug
+ $debug_cmd
+
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
+ # what system we are compiling for in order to pass an extra
# flag for every libtool invocation.
# allow_undefined=no
# FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
+ # to make a dll that has undefined symbols, in which case not
# even a static library is built. For now, we need to specify
# -no-undefined on the libtool link line when we can be certain
# that all symbols are satisfied, otherwise we get a static library.
module=no
no_install=no
objs=
+ os2dllname=
non_pic_objects=
precious_files_regex=
prefer_static_libs=no
- preload=no
+ preload=false
prev=
prevarg=
release=
vinfo=
vinfo_number=no
weak_libs=
- single_module="${wl}-single_module"
+ single_module=$wl-single_module
func_infer_tag $base_compile
# We need to know -static, to get the right output filenames.
do
case $arg in
-shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
+ test yes != "$build_libtool_libs" \
+ && func_fatal_configuration "cannot build a shared library"
build_old_libs=no
break
;;
-all-static | -static | -static-libtool-libs)
case $arg in
-all-static)
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
func_warning "complete static linking is impossible in this configuration"
fi
if test -n "$link_static_flag"; then
# Go through the arguments, transforming them on the way.
while test "$#" -gt 0; do
- arg="$1"
+ arg=$1
shift
func_quote_for_eval "$arg"
qarg=$func_quote_for_eval_unquoted_result
case $prev in
bindir)
- bindir="$arg"
+ bindir=$arg
prev=
continue
;;
dlfiles|dlprefiles)
- if test "$preload" = no; then
+ $preload || {
# Add the symbol object into the linking commands.
func_append compile_command " @SYMFILE@"
func_append finalize_command " @SYMFILE@"
- preload=yes
- fi
+ preload=:
+ }
case $arg in
*.la | *.lo) ;; # We handle these cases below.
force)
- if test "$dlself" = no; then
+ if test no = "$dlself"; then
dlself=needless
export_dynamic=yes
fi
continue
;;
self)
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
dlself=yes
else
dlself=needless
continue
;;
*)
- if test "$prev" = dlfiles; then
+ if test dlfiles = "$prev"; then
func_append dlfiles " $arg"
else
func_append dlprefiles " $arg"
esac
;;
expsyms)
- export_symbols="$arg"
+ export_symbols=$arg
test -f "$arg" \
- || func_fatal_error "symbol file \`$arg' does not exist"
+ || func_fatal_error "symbol file '$arg' does not exist"
prev=
continue
;;
expsyms_regex)
- export_symbols_regex="$arg"
+ export_symbols_regex=$arg
prev=
continue
;;
continue
;;
inst_prefix)
- inst_prefix_dir="$arg"
+ inst_prefix_dir=$arg
+ prev=
+ continue
+ ;;
+ mllvm)
+ # Clang does not use LLVM to link, so we can simply discard any
+ # '-mllvm $arg' options when doing the link step.
prev=
continue
;;
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
- if test "$pic_object" != none; then
+ if test none != "$pic_object"; then
# Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
+ pic_object=$xdir$pic_object
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
fi
# CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
# A PIC object.
func_append libobjs " $pic_object"
- arg="$pic_object"
+ arg=$pic_object
fi
# Non-PIC object.
- if test "$non_pic_object" != none; then
+ if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
+ non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
+ non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
- func_fatal_error "\`$arg' is not a valid libtool object"
+ func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
done
else
- func_fatal_error "link input file \`$arg' does not exist"
+ func_fatal_error "link input file '$arg' does not exist"
fi
arg=$save_arg
prev=
continue
;;
+ os2dllname)
+ os2dllname=$arg
+ prev=
+ continue
+ ;;
precious_regex)
- precious_files_regex="$arg"
+ precious_files_regex=$arg
prev=
continue
;;
release)
- release="-$arg"
+ release=-$arg
prev=
continue
;;
func_fatal_error "only absolute run-paths are allowed"
;;
esac
- if test "$prev" = rpath; then
+ if test rpath = "$prev"; then
case "$rpath " in
*" $arg "*) ;;
*) func_append rpath " $arg" ;;
continue
;;
shrext)
- shrext_cmds="$arg"
+ shrext_cmds=$arg
prev=
continue
;;
esac
fi # test -n "$prev"
- prevarg="$arg"
+ prevarg=$arg
case $arg in
-all-static)
-allow-undefined)
# FIXME: remove this flag sometime in the future.
- func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ func_fatal_error "'-allow-undefined' must not be used because it is the default"
;;
-avoid-version)
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
func_fatal_error "more than one -exported-symbols argument is not allowed"
fi
- if test "X$arg" = "X-export-symbols"; then
+ if test X-export-symbols = "X$arg"; then
prev=expsyms
else
prev=expsyms_regex
func_stripname "-L" '' "$arg"
if test -z "$func_stripname_result"; then
if test "$#" -gt 0; then
- func_fatal_error "require no space between \`-L' and \`$1'"
+ func_fatal_error "require no space between '-L' and '$1'"
else
- func_fatal_error "need path for \`-L' option"
+ func_fatal_error "need path for '-L' option"
fi
fi
func_resolve_sysroot "$func_stripname_result"
*)
absdir=`cd "$dir" && pwd`
test -z "$absdir" && \
- func_fatal_error "cannot determine absolute directory name of \`$dir'"
- dir="$absdir"
+ func_fatal_error "cannot determine absolute directory name of '$dir'"
+ dir=$absdir
;;
esac
case "$deplibs " in
;;
-l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ if test X-lc = "X$arg" || test X-lm = "X$arg"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
# These systems don't actually have a C or math library (as such)
;;
*-*-os2*)
# These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
# Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
;;
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
esac
- elif test "X$arg" = "X-lc_r"; then
+ elif test X-lc_r = "X$arg"; then
case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
continue
;;
+ -mllvm)
+ prev=mllvm
+ continue
+ ;;
+
-module)
module=yes
continue
;;
-multi_module)
- single_module="${wl}-multi_module"
+ single_module=$wl-multi_module
continue
;;
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
# The PATH hackery in wrapper scripts is required on Windows
# and Darwin in order for the loader to find any dlls it needs.
- func_warning "\`-no-install' is ignored for $host"
- func_warning "assuming \`-no-fast-install' instead"
+ func_warning "'-no-install' is ignored for $host"
+ func_warning "assuming '-no-fast-install' instead"
fast_install=no
;;
*) no_install=yes ;;
continue
;;
+ -os2dllname)
+ prev=os2dllname
+ continue
+ ;;
+
-o) prev=output ;;
-precious-files-regex)
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
arg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for flag in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_quote_for_eval "$flag"
func_append arg " $func_quote_for_eval_result"
func_append compiler_flags " $func_quote_for_eval_result"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
func_stripname '-Wl,' '' "$arg"
args=$func_stripname_result
arg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for flag in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_quote_for_eval "$flag"
func_append arg " $wl$func_quote_for_eval_result"
func_append compiler_flags " $wl$func_quote_for_eval_result"
func_append linker_flags " $func_quote_for_eval_result"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
# -msg_* for osf cc
-msg_*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
# Flags to be passed through unchanged, with rationale:
# -m*, -t[45]*, -txscale* architecture-specific flags for GCC
# -F/path path to uninstalled frameworks, gcc on darwin
# -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # -fstack-protector* stack protector flags for GCC
# @file GCC response files
# -tp=* Portland pgcc target processor selection
# --sysroot=* for sysroot support
- # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -specs=* GCC specs files
+ # -stdlib=* select c++ std lib with clang
+ # -fsanitize=* Clang/GCC memory and address sanitizer
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
- -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \
+ -specs=*|-fsanitize=*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
func_append compile_command " $arg"
func_append finalize_command " $arg"
func_append compiler_flags " $arg"
continue
;;
+ -Z*)
+ if test os2 = "`expr $host : '.*\(os2\)'`"; then
+ # OS/2 uses -Zxxx to specify OS/2-specific options
+ compiler_flags="$compiler_flags $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case $arg in
+ -Zlinker | -Zstack)
+ prev=xcompiler
+ ;;
+ esac
+ continue
+ else
+ # Otherwise treat like 'Some other compiler flag' below
+ func_quote_for_eval "$arg"
+ arg=$func_quote_for_eval_result
+ fi
+ ;;
+
# Some other compiler flag.
-* | +*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
*.$objext)
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
- if test "$pic_object" != none; then
+ test none = "$pic_object" || {
# Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
+ pic_object=$xdir$pic_object
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
fi
# CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
# A PIC object.
func_append libobjs " $pic_object"
- arg="$pic_object"
- fi
+ arg=$pic_object
+ }
# Non-PIC object.
- if test "$non_pic_object" != none; then
+ if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
+ non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
+ non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
- func_fatal_error "\`$arg' is not a valid libtool object"
+ func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
;;
# A libtool-controlled library.
func_resolve_sysroot "$arg"
- if test "$prev" = dlfiles; then
+ if test dlfiles = "$prev"; then
# This library was specified with -dlopen.
func_append dlfiles " $func_resolve_sysroot_result"
prev=
- elif test "$prev" = dlprefiles; then
+ elif test dlprefiles = "$prev"; then
# The library was specified with -dlpreopen.
func_append dlprefiles " $func_resolve_sysroot_result"
prev=
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
esac # arg
done # argument parsing loop
test -n "$prev" && \
- func_fatal_help "the \`$prevarg' option requires an argument"
+ func_fatal_help "the '$prevarg' option requires an argument"
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
eval arg=\"$export_dynamic_flag_spec\"
func_append compile_command " $arg"
func_append finalize_command " $arg"
oldlibs=
# calculate the name of the file, without its directory
func_basename "$output"
- outputname="$func_basename_result"
- libobjs_save="$libobjs"
+ outputname=$func_basename_result
+ libobjs_save=$libobjs
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
else
shlib_search_path=
fi
eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+ # Definition is injected by LT_CONFIG during libtool generation.
+ func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
func_dirname "$output" "/" ""
- output_objdir="$func_dirname_result$objdir"
+ output_objdir=$func_dirname_result$objdir
func_to_tool_file "$output_objdir/"
tool_output_objdir=$func_to_tool_file_result
# Create the object directory.
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
func_append libs " $deplib"
done
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
libs="$predeps $libs $compiler_lib_search_path $postdeps"
# Compute libraries that are listed more than once in $predeps
case $file in
*.la) ;;
*)
- func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
;;
esac
done
prog)
compile_deplibs=
finalize_deplibs=
- alldeplibs=no
+ alldeplibs=false
newdlfiles=
newdlprefiles=
passes="conv scan dlopen dlpreopen link"
for pass in $passes; do
# The preopen pass in lib mode reverses $deplibs; put it back here
# so that -L comes before libs that need it for instance...
- if test "$linkmode,$pass" = "lib,link"; then
+ if test lib,link = "$linkmode,$pass"; then
## FIXME: Find the place where the list is rebuilt in the wrong
## order, and fix it there properly
tmp_deplibs=
for deplib in $deplibs; do
tmp_deplibs="$deplib $tmp_deplibs"
done
- deplibs="$tmp_deplibs"
+ deplibs=$tmp_deplibs
fi
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass"; then
+ libs=$deplibs
deplibs=
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
+ dlopen) libs=$dlfiles ;;
+ dlpreopen) libs=$dlprefiles ;;
link)
libs="$deplibs %DEPLIBS%"
test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
;;
esac
fi
- if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ if test lib,dlpreopen = "$linkmode,$pass"; then
# Collect and forward deplibs of preopened libtool libs
for lib in $dlprefiles; do
# Ignore non-libtool-libs
esac
done
done
- libs="$dlprefiles"
+ libs=$dlprefiles
fi
- if test "$pass" = dlopen; then
+ if test dlopen = "$pass"; then
# Collect dlpreopened libraries
- save_deplibs="$deplibs"
+ save_deplibs=$deplibs
deplibs=
fi
for deplib in $libs; do
lib=
- found=no
+ found=false
case $deplib in
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
|-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
func_append compiler_flags " $deplib"
- if test "$linkmode" = lib ; then
+ if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
continue
;;
-l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- func_warning "\`-l' is ignored for archives/objects"
+ if test lib != "$linkmode" && test prog != "$linkmode"; then
+ func_warning "'-l' is ignored for archives/objects"
continue
fi
func_stripname '-l' '' "$deplib"
name=$func_stripname_result
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
else
searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
for searchdir in $searchdirs; do
for search_ext in .la $std_shrext .so .a; do
# Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
+ lib=$searchdir/lib$name$search_ext
if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
+ if test .la = "$search_ext"; then
+ found=:
else
- found=no
+ found=false
fi
break 2
fi
done
done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
+ if $found; then
+ # deplib is a libtool library
# If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
# We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $deplib "*)
if func_lalib_p "$lib"; then
old_library=
func_source "$lib"
for l in $old_library $library_names; do
- ll="$l"
+ ll=$l
done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
+ if test "X$ll" = "X$old_library"; then # only static version available
+ found=false
func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
+ ladir=$func_dirname_result
lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
fi
continue
fi
*) ;;
esac
fi
+ else
+ # deplib doesn't seem to be a libtool library
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
fi
;; # -l
*.ltframework)
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- if test "$linkmode" = lib ; then
+ if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
case $linkmode in
lib)
deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
+ test conv = "$pass" && continue
newdependency_libs="$deplib $newdependency_libs"
func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
prog)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
- if test "$pass" = scan; then
+ if test scan = "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
*)
- func_warning "\`-L' is ignored for archives/objects"
+ func_warning "'-L' is ignored for archives/objects"
;;
esac # linkmode
continue
;; # -L
-R*)
- if test "$pass" = link; then
+ if test link = "$pass"; then
func_stripname '-R' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
dir=$func_resolve_sysroot_result
lib=$func_resolve_sysroot_result
;;
*.$libext)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
case " $dlpreconveniencelibs " in
*" $deplib "*) ;;
*)
- valid_a_lib=no
+ valid_a_lib=false
case $deplibs_check_method in
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
+ valid_a_lib=:
fi
;;
pass_all)
- valid_a_lib=yes
+ valid_a_lib=:
;;
esac
- if test "$valid_a_lib" != yes; then
+ if $valid_a_lib; then
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ else
echo
$ECHO "*** Warning: Trying to link with static lib archive $deplib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because the file extensions .$libext of this argument makes me believe"
echo "*** that it is just a static archive that I should not use here."
- else
- echo
- $ECHO "*** Warning: Linking the shared library $output against the"
- $ECHO "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
fi
;;
esac
continue
;;
prog)
- if test "$pass" != link; then
+ if test link != "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
esac # linkmode
;; # *.$libext
*.lo | *.$objext)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ elif test prog = "$linkmode"; then
+ if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
func_append newdlprefiles " $deplib"
continue
;;
%DEPLIBS%)
- alldeplibs=yes
+ alldeplibs=:
continue
;;
esac # case $deplib
- if test "$found" = yes || test -f "$lib"; then :
- else
- func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
- fi
+ $found || test -f "$lib" \
+ || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$lib" \
- || func_fatal_error "\`$lib' is not a valid libtool archive"
+ || func_fatal_error "'$lib' is not a valid libtool archive"
func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
+ ladir=$func_dirname_result
dlname=
dlopen=
done
fi
dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass" ||
+ { test prog != "$linkmode" && test lib != "$linkmode"; }; then
test -n "$dlopen" && func_append dlfiles " $dlopen"
test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
fi
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
# Only check for convenience libraries
deplibs="$lib $deplibs"
if test -z "$libdir"; then
if test -z "$old_library"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
+ func_fatal_error "cannot find name of link library for '$lib'"
fi
# It is a libtool convenience library, so add in its objects.
func_append convenience " $ladir/$objdir/$old_library"
tmp_libs=
for deplib in $dependency_libs; do
deplibs="$deplib $deplibs"
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
func_append tmp_libs " $deplib"
done
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- func_fatal_error "\`$lib' is not a convenience library"
+ elif test prog != "$linkmode" && test lib != "$linkmode"; then
+ func_fatal_error "'$lib' is not a convenience library"
fi
continue
fi # $pass = conv
# Get the name of the library we link against.
linklib=
if test -n "$old_library" &&
- { test "$prefer_static_libs" = yes ||
- test "$prefer_static_libs,$installed" = "built,no"; }; then
+ { test yes = "$prefer_static_libs" ||
+ test built,no = "$prefer_static_libs,$installed"; }; then
linklib=$old_library
else
for l in $old_library $library_names; do
- linklib="$l"
+ linklib=$l
done
fi
if test -z "$linklib"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
+ func_fatal_error "cannot find name of link library for '$lib'"
fi
# This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
- fi
+ if test dlopen = "$pass"; then
+ test -z "$libdir" \
+ && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
+ test yes != "$dlopen_support" ||
+ test no = "$build_libtool_libs"
+ then
# If there is no dlname, no dlopen support or we're linking
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
# We need an absolute path.
case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
*)
abs_ladir=`cd "$ladir" && pwd`
if test -z "$abs_ladir"; then
- func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "cannot determine absolute directory name of '$ladir'"
func_warning "passing it literally to the linker, although it might fail"
- abs_ladir="$ladir"
+ abs_ladir=$ladir
fi
;;
esac
func_basename "$lib"
- laname="$func_basename_result"
+ laname=$func_basename_result
# Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
+ if test yes = "$installed"; then
if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- func_warning "library \`$lib' was moved."
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
+ func_warning "library '$lib' was moved."
+ dir=$ladir
+ absdir=$abs_ladir
+ libdir=$abs_ladir
else
- dir="$lt_sysroot$libdir"
- absdir="$lt_sysroot$libdir"
+ dir=$lt_sysroot$libdir
+ absdir=$lt_sysroot$libdir
fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ test yes = "$hardcode_automatic" && avoidtemprpath=yes
else
if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
+ dir=$ladir
+ absdir=$abs_ladir
# Remove this search path later
func_append notinst_path " $abs_ladir"
else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
+ dir=$ladir/$objdir
+ absdir=$abs_ladir/$objdir
# Remove this search path later
func_append notinst_path " $abs_ladir"
fi
name=$func_stripname_result
# This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir" && test "$linkmode" = prog; then
- func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ if test dlpreopen = "$pass"; then
+ if test -z "$libdir" && test prog = "$linkmode"; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
fi
- case "$host" in
+ case $host in
# special handling for platforms with PE-DLLs.
*cygwin* | *mingw* | *cegcc* )
# Linker will automatically link against shared library if both
if test -z "$libdir"; then
# Link the convenience library
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
+ elif test prog,link = "$linkmode,$pass"; then
compile_deplibs="$dir/$old_library $compile_deplibs"
finalize_deplibs="$dir/$old_library $finalize_deplibs"
else
fi
- if test "$linkmode" = prog && test "$pass" != link; then
+ if test prog = "$linkmode" && test link != "$pass"; then
func_append newlib_search_path " $ladir"
deplibs="$lib $deplibs"
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
+ linkalldeplibs=false
+ if test no != "$link_all_deplibs" || test -z "$library_names" ||
+ test no = "$build_libtool_libs"; then
+ linkalldeplibs=:
fi
tmp_libs=
;;
esac
# Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
+ if $linkalldeplibs; then
deplibs="$deplib $deplibs"
else
# Need to hardcode shared library paths
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
continue
fi # $linkmode = prog...
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ { { test no = "$prefer_static_libs" ||
+ test built,yes = "$prefer_static_libs,$installed"; } ||
test -z "$old_library"; }; then
# We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
# Make sure the rpath contains only unique directories.
- case "$temp_rpath:" in
+ case $temp_rpath: in
*"$absdir:"*) ;;
*) func_append temp_rpath "$absdir:" ;;
esac
esac
fi # $linkmode,$pass = prog,link...
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
+ if $alldeplibs &&
+ { test pass_all = "$deplibs_check_method" ||
+ { test yes = "$build_libtool_libs" &&
test -n "$library_names"; }; }; then
# We only need to search for static libraries
continue
link_static=no # Whether the deplib will be linked statically
use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes; then
+ if test built = "$use_static_libs" && test yes = "$installed"; then
use_static_libs=no
fi
if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ { test no = "$use_static_libs" || test -z "$old_library"; }; then
case $host in
- *cygwin* | *mingw* | *cegcc*)
+ *cygwin* | *mingw* | *cegcc* | *os2*)
# No point in relinking DLLs because paths are not encoded
func_append notinst_deplibs " $lib"
need_relink=no
;;
*)
- if test "$installed" = no; then
+ if test no = "$installed"; then
func_append notinst_deplibs " $lib"
need_relink=yes
fi
# Warn about portability, can't link against -module's on some
# systems (darwin). Don't bleat about dlopened modules though!
- dlopenmodule=""
+ dlopenmodule=
for dlpremoduletest in $dlprefiles; do
if test "X$dlpremoduletest" = "X$lib"; then
- dlopenmodule="$dlpremoduletest"
+ dlopenmodule=$dlpremoduletest
break
fi
done
- if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
echo
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
$ECHO "*** Warning: Linking the executable $output against the loadable module"
else
$ECHO "*** Warning: Linking the shared library $output against the loadable module"
fi
$ECHO "*** $linklib is not portable!"
fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
+ if test lib = "$linkmode" &&
+ test yes = "$hardcode_into_libs"; then
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
# figure out the soname
set dummy $library_names
shift
- realname="$1"
+ realname=$1
shift
libname=`eval "\\$ECHO \"$libname_spec\""`
# use dlname if we got it. it's perfectly good, no?
if test -n "$dlname"; then
- soname="$dlname"
+ soname=$dlname
elif test -n "$soname_spec"; then
# bleh windows
case $host in
- *cygwin* | mingw* | *cegcc*)
+ *cygwin* | mingw* | *cegcc* | *os2*)
func_arith $current - $age
major=$func_arith_result
- versuffix="-$major"
+ versuffix=-$major
;;
esac
eval soname=\"$soname_spec\"
else
- soname="$realname"
+ soname=$realname
fi
# Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
+ soroot=$soname
func_basename "$soroot"
- soname="$func_basename_result"
+ soname=$func_basename_result
func_stripname 'lib' '.dll' "$soname"
newlib=libimp-$func_stripname_result.a
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
- func_verbose "extracting exported symbol list from \`$soname'"
+ func_verbose "extracting exported symbol list from '$soname'"
func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
fi
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
- func_verbose "generating import library for \`$soname'"
+ func_verbose "generating import library for '$soname'"
func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
fi
# make sure the library variables are pointing to the new library
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
- if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ if test prog = "$linkmode" || test relink != "$opt_mode"; then
add_shlibpath=
add_dir=
add=
lib_linked=yes
case $hardcode_action in
immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
+ if test no = "$hardcode_direct"; then
+ add=$dir/$linklib
case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+ *-*-sysv4*uw2*) add_dir=-L$dir ;;
*-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-unixware7*) add_dir=-L$dir ;;
*-*-darwin* )
- # if the lib is a (non-dlopened) module then we can not
+ # if the lib is a (non-dlopened) module then we cannot
# link against it, someone is ignoring the earlier warnings
if /usr/bin/file -L $add 2> /dev/null |
- $GREP ": [^:]* bundle" >/dev/null ; then
+ $GREP ": [^:]* bundle" >/dev/null; then
if test "X$dlopenmodule" != "X$lib"; then
$ECHO "*** Warning: lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
+ if test -z "$old_library"; then
echo
echo "*** And there doesn't seem to be a static archive available"
echo "*** The link will probably fail, sorry"
else
- add="$dir/$old_library"
+ add=$dir/$old_library
fi
elif test -n "$old_library"; then
- add="$dir/$old_library"
+ add=$dir/$old_library
fi
fi
esac
- elif test "$hardcode_minus_L" = no; then
+ elif test no = "$hardcode_minus_L"; then
case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
+ *-*-sunos*) add_shlibpath=$dir ;;
esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
+ add_dir=-L$dir
+ add=-l$name
+ elif test no = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
else
lib_linked=no
fi
;;
relink)
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$absdir"
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$dir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$absdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
;;
esac
fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
else
lib_linked=no
fi
*) lib_linked=no ;;
esac
- if test "$lib_linked" != yes; then
+ if test yes != "$lib_linked"; then
func_fatal_configuration "unsupported hardcode properties"
fi
*) func_append compile_shlibpath "$add_shlibpath:" ;;
esac
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
test -n "$add" && compile_deplibs="$add $compile_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes &&
- test "$hardcode_minus_L" != yes &&
- test "$hardcode_shlibpath_var" = yes; then
+ if test yes != "$hardcode_direct" &&
+ test yes != "$hardcode_minus_L" &&
+ test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
fi
fi
- if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ if test prog = "$linkmode" || test relink = "$opt_mode"; then
add_shlibpath=
add_dir=
add=
# Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$libdir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$libdir
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
+ add=-l$name
+ elif test yes = "$hardcode_automatic"; then
if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
+ test -f "$inst_prefix_dir$libdir/$linklib"; then
+ add=$inst_prefix_dir$libdir/$linklib
else
- add="$libdir/$linklib"
+ add=$libdir/$linklib
fi
else
# We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
+ add_dir=-L$libdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
;;
esac
fi
- add="-l$name"
+ add=-l$name
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
else
test -n "$add" && deplibs="$add $deplibs"
fi
fi
- elif test "$linkmode" = prog; then
+ elif test prog = "$linkmode"; then
# Here we assume that one of hardcode_direct or hardcode_minus_L
# is not unsupported. This is valid on all known static and
# shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
+ if test unsupported != "$hardcode_direct"; then
+ test -n "$old_library" && linklib=$old_library
compile_deplibs="$dir/$linklib $compile_deplibs"
finalize_deplibs="$dir/$linklib $finalize_deplibs"
else
compile_deplibs="-l$name -L$dir $compile_deplibs"
finalize_deplibs="-l$name -L$dir $finalize_deplibs"
fi
- elif test "$build_libtool_libs" = yes; then
+ elif test yes = "$build_libtool_libs"; then
# Not a shared library
- if test "$deplibs_check_method" != pass_all; then
+ if test pass_all != "$deplibs_check_method"; then
# We're trying link a shared library against a static one
# but the system doesn't support it.
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
echo
- $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ $ECHO "*** Warning: This system cannot link to static lib archive $lib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
+ if test yes = "$module"; then
echo "*** But as you try to build a module library, libtool will still create "
echo "*** a static module, that should work as long as the dlopening application"
echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
- if test "$build_old_libs" = no; then
+ if test no = "$build_old_libs"; then
build_libtool_libs=module
build_old_libs=yes
else
fi
fi # link shared/static library?
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
+ { test yes != "$hardcode_into_libs" ||
+ test yes = "$build_old_libs" ||
+ test yes = "$link_static"; }; then
# Extract -R from dependency_libs
temp_deplibs=
for libdir in $dependency_libs; do
*) func_append temp_deplibs " $libdir";;
esac
done
- dependency_libs="$temp_deplibs"
+ dependency_libs=$temp_deplibs
fi
func_append newlib_search_path " $absdir"
# Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
tmp_libs=
for deplib in $dependency_libs; do
func_resolve_sysroot "$func_stripname_result";;
*) func_resolve_sysroot "$deplib" ;;
esac
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $func_resolve_sysroot_result "*)
func_append specialdeplibs " $func_resolve_sysroot_result" ;;
func_append tmp_libs " $func_resolve_sysroot_result"
done
- if test "$link_all_deplibs" != no; then
+ if test no != "$link_all_deplibs"; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
path=
case $deplib in
- -L*) path="$deplib" ;;
+ -L*) path=$deplib ;;
*.la)
func_resolve_sysroot "$deplib"
deplib=$func_resolve_sysroot_result
dir=$func_dirname_result
# We need an absolute path.
case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
- func_warning "cannot determine absolute directory name of \`$dir'"
- absdir="$dir"
+ func_warning "cannot determine absolute directory name of '$dir'"
+ absdir=$dir
fi
;;
esac
case $host in
*-*-darwin*)
depdepl=
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
+ eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names"; then
+ for tmp in $deplibrary_names; do
depdepl=$tmp
done
- if test -f "$absdir/$objdir/$depdepl" ; then
- depdepl="$absdir/$objdir/$depdepl"
- darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -f "$absdir/$objdir/$depdepl"; then
+ depdepl=$absdir/$objdir/$depdepl
+ darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
if test -z "$darwin_install_name"; then
- darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
fi
- func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
- func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+ func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
path=
fi
fi
;;
*)
- path="-L$absdir/$objdir"
+ path=-L$absdir/$objdir
;;
esac
else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_fatal_error "'$deplib' is not a valid libtool archive"
test "$absdir" != "$libdir" && \
- func_warning "\`$deplib' seems to be moved"
+ func_warning "'$deplib' seems to be moved"
- path="-L$absdir"
+ path=-L$absdir
fi
;;
esac
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
- if test "$pass" = link; then
- if test "$linkmode" = "prog"; then
+ if test link = "$pass"; then
+ if test prog = "$linkmode"; then
compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
else
compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
fi
fi
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
+ dependency_libs=$newdependency_libs
+ if test dlpreopen = "$pass"; then
# Link the dlpreopened libraries before other libraries
for deplib in $save_deplibs; do
deplibs="$deplib $deplibs"
done
fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
+ if test dlopen != "$pass"; then
+ test conv = "$pass" || {
# Make sure lib_search_path contains only unique directories.
lib_search_path=
for dir in $newlib_search_path; do
esac
done
newlib_search_path=
- fi
+ }
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
+ if test prog,link = "$linkmode,$pass"; then
vars="compile_deplibs finalize_deplibs"
+ else
+ vars=deplibs
fi
for var in $vars dependency_libs; do
# Add libraries to $var in reverse order
eval $var=\"$tmp_libs\"
done # for var
fi
+
+ # Add Sun CC postdeps if required:
+ test CXX = "$tagname" && {
+ case $host_os in
+ linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C++ 5.9
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ func_cc_basename "$CC"
+ case $func_cc_basename_result in
+ CC* | sunCC*)
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ }
+
# Last step: remove runtime libs from dependency_libs
# (they stay in deplibs)
tmp_libs=
- for i in $dependency_libs ; do
+ for i in $dependency_libs; do
case " $predeps $postdeps $compiler_lib_search_path " in
*" $i "*)
- i=""
+ i=
;;
esac
- if test -n "$i" ; then
+ if test -n "$i"; then
func_append tmp_libs " $i"
fi
done
dependency_libs=$tmp_libs
done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
+ if test prog = "$linkmode"; then
+ dlfiles=$newdlfiles
fi
- if test "$linkmode" = prog || test "$linkmode" = lib; then
- dlprefiles="$newdlprefiles"
+ if test prog = "$linkmode" || test lib = "$linkmode"; then
+ dlprefiles=$newdlprefiles
fi
case $linkmode in
oldlib)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for archives"
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for archives"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ func_warning "'-l' and '-L' are ignored for archives" ;;
esac
test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for archives"
+ func_warning "'-rpath' is ignored for archives"
test -n "$xrpath" && \
- func_warning "\`-R' is ignored for archives"
+ func_warning "'-R' is ignored for archives"
test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for archives"
+ func_warning "'-version-info/-version-number' is ignored for archives"
test -n "$release" && \
- func_warning "\`-release' is ignored for archives"
+ func_warning "'-release' is ignored for archives"
test -n "$export_symbols$export_symbols_regex" && \
- func_warning "\`-export-symbols' is ignored for archives"
+ func_warning "'-export-symbols' is ignored for archives"
# Now set the variables for building old libraries.
build_libtool_libs=no
- oldlibs="$output"
+ oldlibs=$output
func_append objs "$old_deplibs"
;;
lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
+ # Make sure we only generate libraries of the form 'libNAME.la'.
case $outputname in
lib*)
func_stripname 'lib' '.la' "$outputname"
eval libname=\"$libname_spec\"
;;
*)
- test "$module" = no && \
- func_fatal_help "libtool library \`$output' must begin with \`lib'"
+ test no = "$module" \
+ && func_fatal_help "libtool library '$output' must begin with 'lib'"
- if test "$need_lib_prefix" != no; then
+ if test no != "$need_lib_prefix"; then
# Add the "lib" prefix for modules if required
func_stripname '' '.la' "$outputname"
name=$func_stripname_result
esac
if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ if test pass_all != "$deplibs_check_method"; then
+ func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
else
echo
$ECHO "*** Warning: Linking the shared library $output against the non-libtool"
fi
fi
- test "$dlself" != no && \
- func_warning "\`-dlopen self' is ignored for libtool libraries"
+ test no = "$dlself" \
+ || func_warning "'-dlopen self' is ignored for libtool libraries"
set dummy $rpath
shift
- test "$#" -gt 1 && \
- func_warning "ignoring multiple \`-rpath's for a libtool library"
+ test 1 -lt "$#" \
+ && func_warning "ignoring multiple '-rpath's for a libtool library"
- install_libdir="$1"
+ install_libdir=$1
oldlibs=
if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
# Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
+ # Some compilers have problems with a '.al' extension so
# convenience libraries should have the same extension an
# archive normally would.
oldlibs="$output_objdir/$libname.$libext $oldlibs"
fi
test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+ func_warning "'-version-info/-version-number' is ignored for convenience libraries"
test -n "$release" && \
- func_warning "\`-release' is ignored for convenience libraries"
+ func_warning "'-release' is ignored for convenience libraries"
else
# Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
+ save_ifs=$IFS; IFS=:
set dummy $vinfo 0 0 0
shift
- IFS="$save_ifs"
+ IFS=$save_ifs
test -n "$7" && \
- func_fatal_help "too many parameters to \`-version-info'"
+ func_fatal_help "too many parameters to '-version-info'"
# convert absolute version numbers to libtool ages
# this retains compatibility with .la files and attempts
case $vinfo_number in
yes)
- number_major="$1"
- number_minor="$2"
- number_revision="$3"
+ number_major=$1
+ number_minor=$2
+ number_revision=$3
#
# There are really only two kinds -- those that
# use the current revision as the major version
# and those that subtract age and use age as
# a minor version. But, then there is irix
- # which has an extra 1 added just for fun
+ # that has an extra 1 added just for fun
#
case $version_type in
# correct linux to gnu/linux during the next big refactor
- darwin|linux|osf|windows|none)
+ darwin|freebsd-elf|linux|osf|windows|none)
func_arith $number_major + $number_minor
current=$func_arith_result
- age="$number_minor"
- revision="$number_revision"
+ age=$number_minor
+ revision=$number_revision
;;
- freebsd-aout|freebsd-elf|qnx|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
+ freebsd-aout|qnx|sunos)
+ current=$number_major
+ revision=$number_minor
+ age=0
;;
irix|nonstopux)
func_arith $number_major + $number_minor
current=$func_arith_result
- age="$number_minor"
- revision="$number_minor"
+ age=$number_minor
+ revision=$number_minor
lt_irix_increment=no
;;
*)
- func_fatal_configuration "$modename: unknown library version type \`$version_type'"
+ func_fatal_configuration "$modename: unknown library version type '$version_type'"
;;
esac
;;
no)
- current="$1"
- revision="$2"
- age="$3"
+ current=$1
+ revision=$2
+ age=$3
;;
esac
case $current in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "CURRENT \`$current' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "CURRENT '$current' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $revision in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "REVISION \`$revision' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "REVISION '$revision' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $age in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "AGE \`$age' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "AGE '$age' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
if test "$age" -gt "$current"; then
- func_error "AGE \`$age' is greater than the current interface number \`$current'"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "AGE '$age' is greater than the current interface number '$current'"
+ func_fatal_error "'$vinfo' is not valid version information"
fi
# Calculate the version variables.
# verstring for coding it into the library header
func_arith $current - $age
major=.$func_arith_result
- versuffix="$major.$age.$revision"
+ versuffix=$major.$age.$revision
# Darwin ld doesn't like 0 for these options...
func_arith $current + 1
minor_current=$func_arith_result
- xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ # On Darwin other compilers
+ case $CC in
+ nagfor*)
+ verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+ ;;
+ *)
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+ esac
;;
freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
+ major=.$current
+ versuffix=.$current.$revision
;;
freebsd-elf)
- major=".$current"
- versuffix=".$current"
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=$major.$age.$revision
;;
irix | nonstopux)
- if test "X$lt_irix_increment" = "Xno"; then
+ if test no = "$lt_irix_increment"; then
func_arith $current - $age
else
func_arith $current - $age + 1
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
esac
- verstring="$verstring_prefix$major.$revision"
+ verstring=$verstring_prefix$major.$revision
# Add in all the interfaces that we are compatible with.
loop=$revision
- while test "$loop" -ne 0; do
+ while test 0 -ne "$loop"; do
func_arith $revision - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
- verstring="$verstring_prefix$major.$iface:$verstring"
+ verstring=$verstring_prefix$major.$iface:$verstring
done
- # Before this point, $major must not contain `.'.
+ # Before this point, $major must not contain '.'.
major=.$major
- versuffix="$major.$revision"
+ versuffix=$major.$revision
;;
linux) # correct to gnu/linux during the next big refactor
func_arith $current - $age
major=.$func_arith_result
- versuffix="$major.$age.$revision"
+ versuffix=$major.$age.$revision
;;
osf)
func_arith $current - $age
major=.$func_arith_result
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
+ versuffix=.$current.$age.$revision
+ verstring=$current.$age.$revision
# Add in all the interfaces that we are compatible with.
loop=$age
- while test "$loop" -ne 0; do
+ while test 0 -ne "$loop"; do
func_arith $current - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
- verstring="$verstring:${iface}.0"
+ verstring=$verstring:$iface.0
done
# Make executables depend on our current version.
- func_append verstring ":${current}.0"
+ func_append verstring ":$current.0"
;;
qnx)
- major=".$current"
- versuffix=".$current"
+ major=.$current
+ versuffix=.$current
+ ;;
+
+ sco)
+ major=.$current
+ versuffix=.$current
;;
sunos)
- major=".$current"
- versuffix=".$current.$revision"
+ major=.$current
+ versuffix=.$current.$revision
;;
windows)
# Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
+ # extension on DOS 8.3 file systems.
func_arith $current - $age
major=$func_arith_result
- versuffix="-$major"
+ versuffix=-$major
;;
*)
- func_fatal_configuration "unknown library version type \`$version_type'"
+ func_fatal_configuration "unknown library version type '$version_type'"
;;
esac
verstring=
;;
*)
- verstring="0.0"
+ verstring=0.0
;;
esac
- if test "$need_version" = no; then
+ if test no = "$need_version"; then
versuffix=
else
- versuffix=".0.0"
+ versuffix=.0.0
fi
fi
# Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
+ if test yes,no = "$avoid_version,$need_version"; then
major=
versuffix=
- verstring=""
+ verstring=
fi
# Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- func_warning "undefined symbols not allowed in $host shared libraries"
- build_libtool_libs=no
- build_old_libs=yes
+ if test yes = "$allow_undefined"; then
+ if test unsupported = "$allow_undefined_flag"; then
+ if test yes = "$build_old_libs"; then
+ func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+ build_libtool_libs=no
+ else
+ func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+ fi
fi
else
# Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
+ allow_undefined_flag=$no_undefined_flag
fi
fi
- func_generate_dlsyms "$libname" "$libname" "yes"
+ func_generate_dlsyms "$libname" "$libname" :
func_append libobjs " $symfileobj"
- test "X$libobjs" = "X " && libobjs=
+ test " " = "$libobjs" && libobjs=
- if test "$opt_mode" != relink; then
+ if test relink != "$opt_mode"; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
case $p in
*.$objext | *.gcno)
;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+ if test -n "$precious_files_regex"; then
if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
then
continue
fi
# Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
func_append oldlibs " $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
- oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
*) func_append finalize_rpath " $libdir" ;;
esac
done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
dependency_libs="$temp_xrpath $dependency_libs"
fi
fi
# Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
+ old_dlfiles=$dlfiles
dlfiles=
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
done
# Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
+ old_dlprefiles=$dlprefiles
dlprefiles=
for lib in $old_dlprefiles; do
case "$dlprefiles " in
esac
done
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
if test -n "$rpath"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
;;
*)
# Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
+ if test yes = "$build_libtool_need_lc"; then
func_append deplibs " -lc"
fi
;;
# I'm not sure if I'm treating the release correctly. I think
# release should show up in the -l (ie -lgmp5) so we don't want to
# add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
+ release=
+ versuffix=
+ major=
newdeplibs=
droppeddeps=no
case $deplibs_check_method in
-l*)
func_stripname -l '' "$i"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $i "*)
func_append newdeplibs " $i"
- i=""
+ i=
;;
esac
fi
- if test -n "$i" ; then
+ if test -n "$i"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
func_append newdeplibs " $i"
else
droppeddeps=yes
$opt_dry_run || $RM conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $i "*)
func_append newdeplibs " $i"
- i=""
+ i=
;;
esac
fi
- if test -n "$i" ; then
+ if test -n "$i"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
func_append newdeplibs " $i"
else
droppeddeps=yes
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
;;
esac
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
if test -n "$file_magic_glob"; then
libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
else
libnameglob=$libname
fi
- test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- if test "$want_nocaseglob" = yes; then
+ if test yes = "$want_nocaseglob"; then
shopt -s nocaseglob
potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
$nocaseglob
# We might still enter an endless loop, since a link
# loop can be closed while we follow links,
# but so what?
- potlib="$potent_lib"
+ potlib=$potent_lib
while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+ *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
$SED -e 10q |
$EGREP "$file_magic_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
break 2
fi
done
done
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
+ if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for file magic test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
;;
esac
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
+ potlib=$potent_lib # see symlink-check above in file_magic test
if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
$EGREP "$match_pattern_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
break 2
fi
done
done
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
+ if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
done # Gone through all deplibs.
;;
none | unknown | *)
- newdeplibs=""
+ newdeplibs=
tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ for i in $predeps $postdeps; do
# can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
done
fi
case $tmp_deplibs in
*[!\ \ ]*)
echo
- if test "X$deplibs_check_method" = "Xnone"; then
+ if test none = "$deplibs_check_method"; then
echo "*** Warning: inter-library dependencies are not supported in this platform."
else
echo "*** Warning: inter-library dependencies are not known to be supported."
;;
esac
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
+ if test yes = "$droppeddeps"; then
+ if test yes = "$module"; then
echo
echo "*** Warning: libtool could not satisfy all declared inter-library"
$ECHO "*** dependencies of module $libname. Therefore, libtool will create"
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
echo "*** automatically added whenever a program is linked with this library"
echo "*** or is declared to -dlopen it."
- if test "$allow_undefined" = no; then
+ if test no = "$allow_undefined"; then
echo
echo "*** Since this library must not contain undefined symbols,"
echo "*** because either the platform does not support them or"
echo "*** it was explicitly requested with -no-undefined,"
echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
*) func_append new_libs " $deplib" ;;
esac
done
- deplibs="$new_libs"
+ deplibs=$new_libs
# All the library-specific variables (install_libdir is set above).
library_names=
dlname=
# Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- # Remove ${wl} instances when linking with ld.
+ if test yes = "$build_libtool_libs"; then
+ # Remove $wl instances when linking with ld.
# FIXME: should test the right _cmds variable.
case $archive_cmds in
*\$LD\ *) wl= ;;
esac
- if test "$hardcode_into_libs" = yes; then
+ if test yes = "$hardcode_into_libs"; then
# Hardcode the library paths
hardcode_libdirs=
dep_rpath=
- rpath="$finalize_rpath"
- test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ rpath=$finalize_rpath
+ test relink = "$opt_mode" || rpath=$compile_rpath$rpath
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
func_replace_sysroot "$libdir"
libdir=$func_replace_sysroot_result
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
fi
if test -n "$runpath_var" && test -n "$perm_rpath"; then
test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
fi
- shlibpath="$finalize_shlibpath"
- test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ shlibpath=$finalize_shlibpath
+ test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
eval library_names=\"$library_names_spec\"
set dummy $library_names
shift
- realname="$1"
+ realname=$1
shift
if test -n "$soname_spec"; then
eval soname=\"$soname_spec\"
else
- soname="$realname"
+ soname=$realname
fi
if test -z "$dlname"; then
dlname=$soname
fi
- lib="$output_objdir/$realname"
+ lib=$output_objdir/$realname
linknames=
for link
do
delfiles=
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
- export_symbols="$output_objdir/$libname.uexp"
+ export_symbols=$output_objdir/$libname.uexp
func_append delfiles " $export_symbols"
fi
cygwin* | mingw* | cegcc*)
if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
# exporting using user supplied symfile
- if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ func_dll_def_p "$export_symbols" || {
# and it's NOT already a .def file. Must figure out
# which of the given symbols are data symbols and tag
# them as such. So, trigger use of export_symbols_cmds.
# export_symbols gets reassigned inside the "prepare
# the list of exported symbols" if statement, so the
# include_expsyms logic still works.
- orig_export_symbols="$export_symbols"
+ orig_export_symbols=$export_symbols
export_symbols=
always_export_symbols=yes
- fi
+ }
fi
;;
esac
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
+ if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd1 in $cmds; do
- IFS="$save_ifs"
+ IFS=$save_ifs
# Take the normal branch if the nm_file_list_spec branch
# doesn't work or if tool conversion is not needed.
case $nm_file_list_spec~$to_tool_file_cmd in
try_normal_branch=no
;;
esac
- if test "$try_normal_branch" = yes \
+ if test yes = "$try_normal_branch" \
&& { test "$len" -lt "$max_cmd_len" \
|| test "$max_cmd_len" -le -1; }
then
output_la=$func_basename_result
save_libobjs=$libobjs
save_output=$output
- output=${output_objdir}/${output_la}.nm
+ output=$output_objdir/$output_la.nm
func_to_tool_file "$output"
libobjs=$nm_file_list_spec$func_to_tool_file_result
func_append delfiles " $output"
break
fi
done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ IFS=$save_ifs
+ if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
fi
fi
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
- if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
+ # 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
;;
esac
done
- deplibs="$tmp_deplibs"
+ deplibs=$tmp_deplibs
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec" &&
- test "$compiler_needs_object" = yes &&
+ test yes = "$compiler_needs_object" &&
test -z "$libobjs"; then
# extract the archives, so we have objects to list.
# TODO: could optimize this to just extract one archive.
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
test "X$libobjs" = "X " && libobjs=
else
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
fi
fi
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
func_append linker_flags " $flag"
fi
# Make a backup of the uninstalled library when relinking
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
fi
# Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
+ if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
eval test_cmds=\"$module_expsym_cmds\"
cmds=$module_expsym_cmds
fi
fi
- if test "X$skipped_export" != "X:" &&
+ if test : != "$skipped_export" &&
func_len " $test_cmds" &&
len=$func_len_result &&
test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
last_robj=
k=1
- if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
- output=${output_objdir}/${output_la}.lnkscript
+ if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+ output=$output_objdir/$output_la.lnkscript
func_verbose "creating GNU ld script: $output"
echo 'INPUT (' > $output
for obj in $save_libobjs
func_append delfiles " $output"
func_to_tool_file "$output"
output=$func_to_tool_file_result
- elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
- output=${output_objdir}/${output_la}.lnk
+ elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+ output=$output_objdir/$output_la.lnk
func_verbose "creating linker input file list: $output"
: > $output
set x $save_libobjs
shift
firstobj=
- if test "$compiler_needs_object" = yes; then
+ if test yes = "$compiler_needs_object"; then
firstobj="$1 "
shift
fi
else
if test -n "$save_libobjs"; then
func_verbose "creating reloadable object files..."
- output=$output_objdir/$output_la-${k}.$objext
+ output=$output_objdir/$output_la-$k.$objext
eval test_cmds=\"$reload_cmds\"
func_len " $test_cmds"
len0=$func_len_result
func_len " $obj"
func_arith $len + $func_len_result
len=$func_arith_result
- if test "X$objlist" = X ||
+ if test -z "$objlist" ||
test "$len" -lt "$max_cmd_len"; then
func_append objlist " $obj"
else
# The command $test_cmds is almost too long, add a
# command to the queue.
- if test "$k" -eq 1 ; then
+ if test 1 -eq "$k"; then
# The first file doesn't have a previous command to add.
reload_objs=$objlist
eval concat_cmds=\"$reload_cmds\"
reload_objs="$objlist $last_robj"
eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
fi
- last_robj=$output_objdir/$output_la-${k}.$objext
+ last_robj=$output_objdir/$output_la-$k.$objext
func_arith $k + 1
k=$func_arith_result
- output=$output_objdir/$output_la-${k}.$objext
+ output=$output_objdir/$output_la-$k.$objext
objlist=" $obj"
func_len " $last_robj"
func_arith $len0 + $func_len_result
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
reload_objs="$objlist $last_robj"
- eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ eval concat_cmds=\"\$concat_cmds$reload_cmds\"
if test -n "$last_robj"; then
- eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
func_append delfiles " $output"
output=
fi
- if ${skipped_export-false}; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
+ ${skipped_export-false} && {
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
libobjs=$output
# Append the command to create the export file.
if test -n "$last_robj"; then
eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
- fi
+ }
test -n "$save_libobjs" &&
func_verbose "creating a temporary reloadable object file: $output"
# Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $opt_silent || {
+ IFS=$save_ifs
+ $opt_quiet || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
exit $lt_exit
}
done
- IFS="$save_ifs"
+ IFS=$save_ifs
if test -n "$export_symbols_regex" && ${skipped_export-false}; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
fi
fi
- if ${skipped_export-false}; then
+ ${skipped_export-false} && {
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
if test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
+ # 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
- fi
+ }
libobjs=$output
# Restore the value of output.
# value of $libobjs for piecewise linking.
# Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
+ if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
cmds=$module_expsym_cmds
else
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
test "X$libobjs" = "X " && libobjs=
fi
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd in $cmds; do
- IFS="$save_ifs"
+ IFS=$sp$nl
eval cmd=\"$cmd\"
- $opt_silent || {
+ IFS=$save_ifs
+ $opt_quiet || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
exit $lt_exit
}
done
- IFS="$save_ifs"
+ IFS=$save_ifs
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
if test -n "$convenience"; then
done
# If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
+ if test yes = "$module" || test yes = "$export_dynamic"; then
# On all known operating systems, these are identical.
- dlname="$soname"
+ dlname=$soname
fi
fi
;;
obj)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for objects"
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for objects"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ func_warning "'-l' and '-L' are ignored for objects" ;;
esac
test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for objects"
+ func_warning "'-rpath' is ignored for objects"
test -n "$xrpath" && \
- func_warning "\`-R' is ignored for objects"
+ func_warning "'-R' is ignored for objects"
test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for objects"
+ func_warning "'-version-info' is ignored for objects"
test -n "$release" && \
- func_warning "\`-release' is ignored for objects"
+ func_warning "'-release' is ignored for objects"
case $output in
*.lo)
test -n "$objs$old_deplibs" && \
- func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+ func_fatal_error "cannot build library object '$output' from non-libtool objects"
libobj=$output
func_lo2o "$libobj"
;;
*)
libobj=
- obj="$output"
+ obj=$output
;;
esac
# the extraction.
reload_conv_objs=
gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
- wl=
-
+ # if reload_cmds runs $LD directly, get rid of -Wl from
+ # whole_archive_flag_spec and hope we can get by with turning comma
+ # into space.
+ case $reload_cmds in
+ *\$LD[\ \$]*) wl= ;;
+ esac
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
else
- gentop="$output_objdir/${obj}x"
+ gentop=$output_objdir/${obj}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
fi
# If we're not building shared, we need to use non_pic_objs
- test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+ test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
# Create the old-style object.
- reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
- output="$obj"
+ output=$obj
func_execute_cmds "$reload_cmds" 'exit $?'
# Exit if we aren't doing a library object file.
exit $EXIT_SUCCESS
fi
- if test "$build_libtool_libs" != yes; then
+ test yes = "$build_libtool_libs" || {
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
# $show "echo timestamp > $libobj"
# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
exit $EXIT_SUCCESS
- fi
+ }
- if test -n "$pic_flag" || test "$pic_mode" != default; then
+ if test -n "$pic_flag" || test default != "$pic_mode"; then
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
+ output=$libobj
func_execute_cmds "$reload_cmds" 'exit $?'
fi
output=$func_stripname_result.exe;;
esac
test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for programs"
+ func_warning "'-version-info' is ignored for programs"
test -n "$release" && \
- func_warning "\`-release' is ignored for programs"
+ func_warning "'-release' is ignored for programs"
- test "$preload" = yes \
- && test "$dlopen_support" = unknown \
- && test "$dlopen_self" = unknown \
- && test "$dlopen_self_static" = unknown && \
- func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+ $preload \
+ && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+ && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
*-*-darwin*)
# Don't allow lazy linking, it breaks C++ global constructors
# But is supposedly fixed on 10.4 or later (yay!).
- if test "$tagname" = CXX ; then
+ if test CXX = "$tagname"; then
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[0123])
- func_append compile_command " ${wl}-bind_at_load"
- func_append finalize_command " ${wl}-bind_at_load"
+ func_append compile_command " $wl-bind_at_load"
+ func_append finalize_command " $wl-bind_at_load"
;;
esac
fi
*) func_append new_libs " $deplib" ;;
esac
done
- compile_deplibs="$new_libs"
+ compile_deplibs=$new_libs
func_append compile_command " $compile_deplibs"
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
fi
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
::) dllsearchpath=$libdir;;
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
- compile_rpath="$rpath"
+ compile_rpath=$rpath
rpath=
hardcode_libdirs=
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
- finalize_rpath="$rpath"
+ finalize_rpath=$rpath
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ if test -n "$libobjs" && test yes = "$build_old_libs"; then
# Transform all the library objects into standard objects.
compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
fi
- func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+ func_generate_dlsyms "$outputname" "@PROGRAM@" false
# template prelinking step
if test -n "$prelink_cmds"; then
func_execute_cmds "$prelink_cmds" 'exit $?'
fi
- wrappers_required=yes
+ wrappers_required=:
case $host in
*cegcc* | *mingw32ce*)
# Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
- wrappers_required=no
+ wrappers_required=false
;;
*cygwin* | *mingw* )
- if test "$build_libtool_libs" != yes; then
- wrappers_required=no
- fi
+ test yes = "$build_libtool_libs" || wrappers_required=false
;;
*)
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- wrappers_required=no
+ if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+ wrappers_required=false
fi
;;
esac
- if test "$wrappers_required" = no; then
+ $wrappers_required || {
# Replace the output file specification.
compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
+ link_command=$compile_command$compile_rpath
# We have no uninstalled library dependencies, so finalize right now.
exit_status=0
fi
# Delete the generated files.
- if test -f "$output_objdir/${outputname}S.${objext}"; then
- func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ if test -f "$output_objdir/${outputname}S.$objext"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
fi
exit $exit_status
- fi
+ }
if test -n "$compile_shlibpath$finalize_shlibpath"; then
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
fi
fi
- if test "$no_install" = yes; then
+ if test yes = "$no_install"; then
# We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
+ link_command=$compile_var$compile_command$compile_rpath
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
exit $EXIT_SUCCESS
fi
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
+ case $hardcode_action,$fast_install in
+ relink,*)
+ # Fast installation is not supported
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
- func_warning "this platform does not like uninstalled shared libraries"
- func_warning "\`$output' will be relinked during installation"
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "'$output' will be relinked during installation"
+ ;;
+ *,yes)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ ;;
+ *,no)
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
+ ;;
+ *,needless)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=
+ ;;
+ esac
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
func_dirname_and_basename "$output" "" "."
output_name=$func_basename_result
output_path=$func_dirname_result
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
+ cwrappersource=$output_path/$objdir/lt-$output_name.c
+ cwrapper=$output_path/$output_name.exe
$RM $cwrappersource $cwrapper
trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
$opt_dry_run || {
# note: this script will not be executed, so do not chmod.
- if test "x$build" = "x$host" ; then
+ if test "x$build" = "x$host"; then
$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
else
func_emit_wrapper no > $func_ltwrapper_scriptname_result
# See if we need to build an old-fashioned archive.
for oldlib in $oldlibs; do
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save $symfileobj"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
+ case $build_libtool_libs in
+ convenience)
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs=$convenience
build_libtool_libs=no
- else
+ ;;
+ module)
+ oldobjs=$libobjs_save
+ addlibs=$old_convenience
+ build_libtool_libs=no
+ ;;
+ *)
oldobjs="$old_deplibs $non_pic_objects"
- if test "$preload" = yes && test -f "$symfileobj"; then
- func_append oldobjs " $symfileobj"
- fi
- fi
- addlibs="$old_convenience"
- fi
+ $preload && test -f "$symfileobj" \
+ && func_append oldobjs " $symfileobj"
+ addlibs=$old_convenience
+ ;;
+ esac
if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $addlibs
fi
# Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
cmds=$old_archive_from_new_cmds
else
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
:
else
echo "copying selected object files to avoid basename conflicts..."
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
for obj in $save_oldobjs
do
func_basename "$obj"
- objbase="$func_basename_result"
+ objbase=$func_basename_result
case " $oldobjs " in
" ") oldobjs=$obj ;;
*[\ /]"$objbase "*)
else
# the above command should be used before it gets too long
oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
+ if test "$obj" = "$last_oldobj"; then
RANLIB=$save_RANLIB
fi
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
objlist=
len=$len0
fi
done
RANLIB=$save_RANLIB
oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
+ if test -z "$oldobjs"; then
eval cmds=\"\$concat_cmds\"
else
eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
case $output in
*.la)
old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
+ test yes = "$build_old_libs" && old_library=$libname.$libext
func_verbose "creating $output"
# Preserve any variables that may affect compiler behavior
fi
done
# Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
- if test "$hardcode_automatic" = yes ; then
+ if test yes = "$hardcode_automatic"; then
relink_command=
fi
# Only create the output if not a dry run.
$opt_dry_run || {
for installed in no yes; do
- if test "$installed" = yes; then
+ if test yes = "$installed"; then
if test -z "$install_libdir"; then
break
fi
- output="$output_objdir/$outputname"i
+ output=$output_objdir/${outputname}i
# Replace all uninstalled libtool libraries with the installed ones
newdependency_libs=
for deplib in $dependency_libs; do
case $deplib in
*.la)
func_basename "$deplib"
- name="$func_basename_result"
+ name=$func_basename_result
func_resolve_sysroot "$deplib"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_fatal_error "'$deplib' is not a valid libtool archive"
func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
;;
-L*)
*) func_append newdependency_libs " $deplib" ;;
esac
done
- dependency_libs="$newdependency_libs"
+ dependency_libs=$newdependency_libs
newdlfiles=
for lib in $dlfiles; do
case $lib in
*.la)
func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
;;
*) func_append newdlfiles " $lib" ;;
esac
done
- dlfiles="$newdlfiles"
+ dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
# didn't already link the preopened objects directly into
# the library:
func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
;;
esac
done
- dlprefiles="$newdlprefiles"
+ dlprefiles=$newdlprefiles
else
newdlfiles=
for lib in $dlfiles; do
case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlfiles " $abs"
done
- dlfiles="$newdlfiles"
+ dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlprefiles " $abs"
done
- dlprefiles="$newdlprefiles"
+ dlprefiles=$newdlprefiles
fi
$RM $output
# place dlname in correct position for cygwin
case $host,$output,$installed,$module,$dlname in
*cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
# If a -bindir argument was supplied, place the dll there.
- if test "x$bindir" != x ;
- then
+ if test -n "$bindir"; then
func_relative_path "$install_libdir" "$bindir"
- tdlname=$func_relative_path_result$dlname
+ tdlname=$func_relative_path_result/$dlname
else
# Otherwise fall back on heuristic.
tdlname=../bin/$dlname
esac
$ECHO > $output "\
# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
# The name of the static archive.
old_library='$old_library'
-# Linker flags that can not go in dependency_libs.
+# Linker flags that cannot go in dependency_libs.
inherited_linker_flags='$new_inherited_linker_flags'
# Libraries that this one depends upon.
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
+ if test no,yes = "$installed,$need_relink"; then
$ECHO >> $output "\
relink_command=\"$relink_command\""
fi
exit $EXIT_SUCCESS
}
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
- func_mode_link ${1+"$@"}
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+ func_mode_link ${1+"$@"}
+fi
# func_mode_uninstall arg...
func_mode_uninstall ()
{
- $opt_debug
- RM="$nonopt"
+ $debug_cmd
+
+ RM=$nonopt
files=
- rmforce=
+ rmforce=false
exit_status=0
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
- libtool_install_magic="$magic"
+ libtool_install_magic=$magic
for arg
do
case $arg in
- -f) func_append RM " $arg"; rmforce=yes ;;
+ -f) func_append RM " $arg"; rmforce=: ;;
-*) func_append RM " $arg" ;;
*) func_append files " $arg" ;;
esac
for file in $files; do
func_dirname "$file" "" "."
- dir="$func_dirname_result"
- if test "X$dir" = X.; then
- odir="$objdir"
+ dir=$func_dirname_result
+ if test . = "$dir"; then
+ odir=$objdir
else
- odir="$dir/$objdir"
+ odir=$dir/$objdir
fi
func_basename "$file"
- name="$func_basename_result"
- test "$opt_mode" = uninstall && odir="$dir"
+ name=$func_basename_result
+ test uninstall = "$opt_mode" && odir=$dir
# Remember odir for removal later, being careful to avoid duplicates
- if test "$opt_mode" = clean; then
+ if test clean = "$opt_mode"; then
case " $rmdirs " in
*" $odir "*) ;;
*) func_append rmdirs " $odir" ;;
elif test -d "$file"; then
exit_status=1
continue
- elif test "$rmforce" = yes; then
+ elif $rmforce; then
continue
fi
- rmfiles="$file"
+ rmfiles=$file
case $name in
*.la)
done
test -n "$old_library" && func_append rmfiles " $odir/$old_library"
- case "$opt_mode" in
+ case $opt_mode in
clean)
case " $library_names " in
*" $dlname "*) ;;
uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
- func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
fi
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
- func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
fi
# FIXME: should reinstall the best remaining shared library.
;;
func_source $dir/$name
# Add PIC object to the list of files to remove.
- if test -n "$pic_object" &&
- test "$pic_object" != none; then
+ if test -n "$pic_object" && test none != "$pic_object"; then
func_append rmfiles " $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" &&
- test "$non_pic_object" != none; then
+ if test -n "$non_pic_object" && test none != "$non_pic_object"; then
func_append rmfiles " $dir/$non_pic_object"
fi
fi
;;
*)
- if test "$opt_mode" = clean ; then
+ if test clean = "$opt_mode"; then
noexename=$name
case $file in
*.exe)
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
- func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+ if test yes = "$fast_install" && test -n "$relink_command"; then
func_append rmfiles " $odir/lt-$name"
fi
- if test "X$noexename" != "X$name" ; then
- func_append rmfiles " $odir/lt-${noexename}.c"
+ if test "X$noexename" != "X$name"; then
+ func_append rmfiles " $odir/lt-$noexename.c"
fi
fi
fi
func_show_eval "$RM $rmfiles" 'exit_status=1'
done
- # Try to remove the ${objdir}s in the directories where we deleted files
+ # Try to remove the $objdir's in the directories where we deleted files
for dir in $rmdirs; do
if test -d "$dir"; then
func_show_eval "rmdir $dir >/dev/null 2>&1"
exit $exit_status
}
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
- func_mode_uninstall ${1+"$@"}
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+ func_mode_uninstall ${1+"$@"}
+fi
test -z "$opt_mode" && {
- help="$generic_help"
+ help=$generic_help
func_fatal_help "you must specify a MODE"
}
test -z "$exec_cmd" && \
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode '$opt_mode'"
if test -n "$exec_cmd"; then
eval exec "$exec_cmd"
# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
+# where we disable both kinds of libraries. Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
# mode:shell-script
# sh-indentation:2
# End:
-# vi:sw=2
-
scriptversion=2013-10-28.13; # UTC
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
scriptversion=2013-07-13.22; # UTC
-# Copyright (C) 2011-2013 Free Software Foundation, Inc.
+# Copyright (C) 2011-2014 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# Test script is run here.
"$@" >$log_file 2>&1
estatus=$?
+
if test $enable_hard_errors = no && test $estatus -eq 99; then
- estatus=1
+ tweaked_estatus=1
+else
+ tweaked_estatus=$estatus
fi
-case $estatus:$expect_failure in
+case $tweaked_estatus:$expect_failure in
0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
0:*) col=$grn res=PASS recheck=no gcopy=no;;
77:*) col=$blu res=SKIP recheck=no gcopy=yes;;
*:*) col=$red res=FAIL recheck=yes gcopy=yes;;
esac
+# Report the test outcome and exit status in the logs, so that one can
+# know whether the test passed or failed simply by looking at the '.log'
+# file, without the need of also peaking into the corresponding '.trs'
+# file (automake bug#11814).
+echo "$res $test_name (exit status: $estatus)" >>$log_file
+
# Report outcome to console.
echo "${col}${res}${std}: $test_name"
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = cmake
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(srcdir)/GtkDocConfig.cmake.in \
- $(srcdir)/GtkDocConfigVersion.cmake.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES = GtkDocConfig.cmake GtkDocConfigVersion.cmake
CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(cmakedir)"
DATA = $(cmake_DATA)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/GtkDocConfig.cmake.in \
+ $(srcdir)/GtkDocConfigVersion.cmake.in $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cmake/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu cmake/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
uninstall-am uninstall-cmakeDATA
+.PRECIOUS: Makefile
+
-include $(top_srcdir)/git.mk
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for gtk-doc 1.26.
+# Generated by GNU Autoconf 2.69 for gtk-doc 1.27.
#
# Report bugs to <http://bugzilla.gnome.org/enter_bug.cgi?product=gtk-doc>.
#
# Identity of this package.
PACKAGE_NAME='gtk-doc'
PACKAGE_TARNAME='gtk-doc'
-PACKAGE_VERSION='1.26'
-PACKAGE_STRING='gtk-doc 1.26'
+PACKAGE_VERSION='1.27'
+PACKAGE_STRING='gtk-doc 1.27'
PACKAGE_BUGREPORT='http://bugzilla.gnome.org/enter_bug.cgi?product=gtk-doc'
PACKAGE_URL=''
DATE_FMT_CMD
ELAPSED_FMT
TS_FMT
-TRACE
glib_prefix
BUILD_TESTS_FALSE
BUILD_TESTS_TRUE
PKG_CONFIG_PATH
PKG_CONFIG
CPP
+LT_SYS_LIBRARY_PATH
OTOOL64
OTOOL
LIPO
docdir
oldincludedir
includedir
+runstatedir
localstatedir
sharedstatedir
sysconfdir
enable_static
with_pic
enable_fast_install
+with_aix_soname
with_gnu_ld
with_sysroot
enable_libtool_lock
LDFLAGS
LIBS
CPPFLAGS
+LT_SYS_LIBRARY_PATH
CPP
PKG_CONFIG
PKG_CONFIG_PATH
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
includedir='${prefix}/include'
oldincludedir='/usr/include'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
+ -runstatedir | --runstatedir | --runstatedi | --runstated \
+ | --runstate | --runstat | --runsta | --runst | --runs \
+ | --run | --ru | --r)
+ ac_prev=runstatedir ;;
+ -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+ | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+ | --run=* | --ru=* | --r=*)
+ runstatedir=$ac_optarg ;;
+
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
datadir sysconfdir sharedstatedir localstatedir includedir \
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
+ libdir localedir mandir runstatedir
do
eval ac_val=\$$ac_var
# Remove trailing slashes.
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures gtk-doc 1.26 to adapt to many kinds of systems.
+\`configure' configures gtk-doc 1.27 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of gtk-doc 1.26:";;
+ short | recursive ) echo "Configuration of gtk-doc 1.27:";;
esac
cat <<\_ACEOF
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
both]
+ --with-aix-soname=aix|svr4|both
+ shared library versioning (aka "SONAME") variant to
+ provide on AIX, [default=aix].
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
- --with-sysroot=DIR Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).
+ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the
+ compiler's sysroot if not specified).
--with-xml-catalog=CATALOG
path to xml catalog to use
--with-highlight Select source code syntax highlighter
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
+ LT_SYS_LIBRARY_PATH
+ User-defined run-time library search path.
CPP C preprocessor
PKG_CONFIG path to pkg-config utility
PKG_CONFIG_PATH
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-gtk-doc configure 1.26
+gtk-doc configure 1.27
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by gtk-doc $as_me 1.26, which was
+It was created by gtk-doc $as_me 1.27, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
-am__api_version='1.14'
+am__api_version='1.15'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
if test x"${MISSING+set}" != xset; then
case $am_aux_dir in
$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
# Define the identity of the package.
PACKAGE='gtk-doc'
- VERSION='1.26'
+ VERSION='1.27'
cat >>confdefs.h <<_ACEOF
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
mkdir_p='$(MKDIR_P)'
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
fi
fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
# Check whether --enable-maintainer-mode was given.
-macro_version='2.4.2'
-macro_revision='1.3337'
+macro_version='2.4.6'
+macro_revision='2.4.6'
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
$ECHO ""
}
-case "$ECHO" in
+case $ECHO in
printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
$as_echo "printf" >&6; } ;;
print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+ withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
+ test no != "$with_gnu_ld" && break
;;
*)
- test "$with_gnu_ld" != yes && break
+ test yes != "$with_gnu_ld" && break
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
fi
fi
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
if test -n "$LD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
else
if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ lt_cv_path_NM=$NM
else
- lt_nm_to_check="${ac_tool_prefix}nm"
+ lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
- break
+ break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
- break
+ break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
$as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
fi
fi
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
*COFF*)
- DUMPBIN="$DUMPBIN -symbols"
+ DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
esac
fi
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
$as_echo_n "(cached) " >&6
else
i=0
- teststring="ABCD"
+ teststring=ABCD
case $build_os in
msdosdjgpp*)
lt_cv_sys_max_cmd_len=8192;
;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
if test -n "$lt_cv_sys_max_cmd_len" && \
- test undefined != "$lt_cv_sys_max_cmd_len"; then
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
+ for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
+ test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
fi
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
else
: ${MV="mv -f"}
: ${RM="rm -f"}
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
reload_cmds=false
fi
;;
darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[4-9]*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
lt_cv_deplibs_check_method=pass_all
;;
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
fi
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
;;
*)
# fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
- if test "$ac_status" -eq 0; then
+ if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
- if test "$ac_status" -ne 0; then
+ if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
$as_echo "$lt_cv_ar_at_file" >&6; }
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
if test -n "$RANLIB"; then
case $host_os in
- openbsd*)
+ bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
symcode='[ABCDGISTW]'
;;
hpux*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
symcode='[ABCDEGRST]'
fi
;;
symcode='[ABCDGIRSTW]' ;;
esac
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK '"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
+ LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ test $ac_status = 0; } && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
+ if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
+
+
+
+
+
+
+
+
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
$as_echo_n "checking for sysroot... " >&6; }
lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
yes)
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
no|'')
;; #(
*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
-$as_echo "${with_sysroot}" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
;;
esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+ ac_path_lt_DD_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in dd; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+ $ac_path_lt_DD_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_lt_DD"; then
+ :
+ fi
+else
+ ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then :
enableval=$enable_libtool_lock;
fi
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
test $ac_status = 0; }; then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
- HPUX_IA64_MODE="32"
+ HPUX_IA64_MODE=32
;;
*ELF-64*)
- HPUX_IA64_MODE="64"
+ HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo '#line '$LINENO' "configure"' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
rm -rf conftest*
;;
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
;;
esac
;;
- powerpc64le-*)
+ powerpc64le-*linux*)
LD="${LD-ld} -m elf32lppclinux"
;;
- powerpc64-*)
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- powerpcle-*)
+ powerpcle-*linux*)
LD="${LD-ld} -m elf64lppc"
;;
- powerpc-*)
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
+ SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
$as_echo "$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+ CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
- i?86-*-solaris*)
+ i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
+ LD=${LD-ld}_sol2
fi
;;
*)
;;
esac
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
$as_echo "$lt_cv_path_mainfest_tool" >&6; }
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
$as_echo_n "(cached) " >&6
else
lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
+ if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
cat conftest.err >&5
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&5
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&5
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&5
$as_echo "$lt_cv_ld_force_load" >&6; }
case $host_os in
rhapsody* | darwin1.[012])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[91]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[012]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[012][,.]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
;;
esac
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
fi
-test -z "$pic_mode" && pic_mode=default
-
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
+ shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+ withval=$with_aix_soname; case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname
+else
+ if ${lt_cv_with_aix_soname+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_with_aix_soname=aix
+fi
+
+ with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+
+
+
+
+
+
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
+ if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
# Only perform the check for file, if the check method requires it
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -f "$ac_dir/${ac_tool_prefix}file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac
fi
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -f "$ac_dir/file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac
fi
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
# Use C for the default configuration in the libtool script
-lt_save_CC="$CC"
+lt_save_CC=$CC
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
lt_prog_compiler_no_builtin_flag=
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
lt_cv_prog_compiler_rtti_exceptions=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
+ lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
else
:
lt_prog_compiler_static=
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_static='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
fi
+ lt_prog_compiler_pic='-fPIC'
;;
amigaos*)
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
;;
esac
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
case $host_os in
aix*)
lt_prog_compiler_wl='-Wl,'
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
else
fi
;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
;;
hpux9* | hpux10* | hpux11*)
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static='${wl}-a ${wl}archive'
+ lt_prog_compiler_static='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
+ # old Intel for x86_64, which still supported -KPIC.
ecc*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_pic='-PIC'
lt_prog_compiler_static='-Bstatic'
;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
lt_prog_compiler_pic='-Kconform_pic'
lt_prog_compiler_static='-Bstatic'
fi
fi
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic=
;;
lt_cv_prog_compiler_pic_works=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
case $lt_prog_compiler_pic in
"" | " "*) ;;
*) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_static_works=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works"; then
:
else
lt_prog_compiler_static=
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
$as_echo_n "checking if we can lock with hard links... " >&6; }
ln conftest.a conftest.b 2>/dev/null && hard_links=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ if test no = "$hard_links"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
- openbsd*)
+ openbsd* | bitrig*)
with_gnu_ld=no
;;
linux* | k*bsd*-gnu | gnu*)
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
esac
fi
- if test "$lt_use_gnu_ld_interface" = yes; then
+ if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+ wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ export_dynamic_flag_spec='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
whole_archive_flag_spec=
fi
supports_anon_versioning=no
- case `$LD -v 2>&1` in
+ case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
case $host_os in
aix[3-9]*)
# On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
+ if test ia64 != "$host_cpu"; then
ld_shlibs=no
cat <<_LT_EOF 1>&2
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
allow_undefined_flag=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
ld_shlibs=no
fi
# _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
- export_dynamic_flag_spec='${wl}--export-all-symbols'
+ export_dynamic_flag_spec='$wl--export-all-symbols'
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
ld_shlibs=no
fi
;;
haiku*)
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
link_all_deplibs=yes
;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
interix[3-9]*)
hardcode_direct=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
+ if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
+ && test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
lf95*) # Lahey Fortran 8.1
whole_archive_flag_spec=
tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
compiler_needs_object=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
compiler_needs_object=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
+ tcc*)
+ export_dynamic_flag_spec='-rdynamic'
+ ;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
ld_shlibs=no
cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
esac
- if test "$ld_shlibs" = no; then
+ if test no = "$ld_shlibs"; then
runpath_var=
hardcode_libdir_flag_spec=
export_dynamic_flag_spec=
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct=unsupported
;;
aix[4-9]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
hardcode_direct_absolute=yes
hardcode_libdir_separator=':'
link_all_deplibs=yes
- file_list_spec='${wl}-f,'
+ file_list_spec='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ ;;
+ esac
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
;;
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
fi
- link_all_deplibs=no
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- export_dynamic_flag_spec='${wl}-bexpall'
+ export_dynamic_flag_spec='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
+ if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath_+:} false; then :
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_="/usr/lib:/lib"
+ lt_cv_aix_libpath_=/usr/lib:/lib
fi
fi
aix_libpath=$lt_cv_aix_libpath_
fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
+ if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath_+:} false; then :
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_="/usr/lib:/lib"
+ lt_cv_aix_libpath_=/usr/lib:/lib
fi
fi
aix_libpath=$lt_cv_aix_libpath_
fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- no_undefined_flag=' ${wl}-bernotok'
- allow_undefined_flag=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ no_undefined_flag=' $wl-bernotok'
+ allow_undefined_flag=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec='$convenience'
fi
archive_cmds_need_lc=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
enable_shared_with_static_runtimes=yes
# Don't use ranlib
old_postinstall_cmds='chmod 644 $oldlib'
postlink_cmds='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# Assume MSVC wrapper
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ if test yes = "$lt_cv_ld_force_load"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
else
whole_archive_flag_spec=''
fi
link_all_deplibs=yes
- allow_undefined_flag="$_lt_dar_allow_undefined"
+ allow_undefined_flag=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
+ if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
- archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
else
ld_shlibs=no
;;
hpux9*)
- if test "$GCC" = yes; then
- archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GCC"; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
;;
hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
;;
hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler__b=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS -b"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
$as_echo "$lt_cv_prog_compiler__b" >&6; }
-if test x"$lt_cv_prog_compiler__b" = xyes; then
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+if test yes = "$lt_cv_prog_compiler__b"; then
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
;;
esac
fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
case $host_cpu in
*)
hardcode_direct=yes
hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
;;
irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
if ${lt_cv_irix_exported_symbol+:} false; then :
$as_echo_n "(cached) " >&6
else
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int foo (void) { return 0; }
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
$as_echo "$lt_cv_irix_exported_symbol" >&6; }
- if test "$lt_cv_irix_exported_symbol" = yes; then
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
+ link_all_deplibs=no
else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
inherit_rpath=yes
link_all_deplibs=yes
;;
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ ld_shlibs=yes
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
newsos6)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
hardcode_shlibpath_var=no
;;
*nto* | *qnx*)
;;
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
hardcode_direct=yes
hardcode_shlibpath_var=no
hardcode_direct_absolute=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
fi
else
ld_shlibs=no
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
- archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
;;
osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
solaris*)
no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
- wlarc='${wl}'
- archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ wlarc='$wl'
+ archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ if test yes = "$GCC"; then
+ whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
fi
;;
sunos4*)
- if test "x$host_vendor" = xsequent; then
+ if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag='${wl}-z,text'
+ no_undefined_flag='$wl-z,text'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- no_undefined_flag='${wl}-z,text'
- allow_undefined_flag='${wl}-z,nodefs'
+ no_undefined_flag='$wl-z,text'
+ allow_undefined_flag='$wl-z,nodefs'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_flag_spec='$wl-R,$libdir'
hardcode_libdir_separator=':'
link_all_deplibs=yes
- export_dynamic_flag_spec='${wl}-Bexport'
+ export_dynamic_flag_spec='$wl-Bexport'
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
;;
esac
- if test x$host_vendor = xsni; then
+ if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- export_dynamic_flag_spec='${wl}-Blargedynsym'
+ export_dynamic_flag_spec='$wl-Blargedynsym'
;;
esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+test no = "$ld_shlibs" && can_build_shared=no
with_gnu_ld=$with_gnu_ld
# Assume -lc should be added
archive_cmds_need_lc=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $archive_cmds in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
$as_echo_n "checking dynamic linker characteristics... " >&6; }
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
+ # and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
+ lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
# flags to be left without arguments
need_version=unknown
+
+
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[4-9]*)
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a(lib.so.V)'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi[45]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
*,cl*)
# Native MSVC
libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
- sys_lib_search_path_spec="$LIB"
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
*)
# Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
dynamic_linker=no
;;
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+
# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
# before this can be enabled.
hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
else
- shlibpath_overrides_runpath=yes
+ need_version=yes
fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" ||
test -n "$runpath_var" ||
- test "X$hardcode_automatic" = "Xyes" ; then
+ test yes = "$hardcode_automatic"; then
# We can hardcode non-existent directories.
- if test "$hardcode_direct" != no &&
+ if test no != "$hardcode_direct" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
- test "$hardcode_minus_L" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+ test no != "$hardcode_minus_L"; then
# Linking always hardcodes the temporary library directory.
hardcode_action=relink
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
$as_echo "$hardcode_action" >&6; }
-if test "$hardcode_action" = relink ||
- test "$inherit_rpath" = yes; then
+if test relink = "$hardcode_action" ||
+ test yes = "$inherit_rpath"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
- if test "x$enable_dlopen" != xyes; then
+ if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
case $host_os in
beos*)
- lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
- # if libdl is installed we need to link against it
+ # if libdl is installed we need to link against it
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
if ${ac_cv_lib_dl_dlopen+:} false; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
else
- lt_cv_dlopen="dyld"
+ lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
*)
ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
if test "x$ac_cv_func_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load"
+ lt_cv_dlopen=shl_load
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
$as_echo_n "checking for shl_load in -ldld... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+ lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
else
ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
if test "x$ac_cv_func_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
$as_echo_n "checking for dlopen in -lsvld... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
$as_echo_n "checking for dld_link in -ldld... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+ lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
fi
;;
esac
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
+ if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
+ else
+ enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- save_LIBS="$LIBS"
+ save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
if ${lt_cv_dlopen_self+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "$cross_compiling" = yes; then :
+ if test yes = "$cross_compiling"; then :
lt_cv_dlopen_self=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
$as_echo "$lt_cv_dlopen_self" >&6; }
- if test "x$lt_cv_dlopen_self" = xyes; then
+ if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
if ${lt_cv_dlopen_self_static+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "$cross_compiling" = yes; then :
+ if test yes = "$cross_compiling"; then :
lt_cv_dlopen_self_static=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
$as_echo "$lt_cv_dlopen_self_static" >&6; }
fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
;;
esac
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
- if test -n "$STRIP" ; then
+ if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
- # Report which library types will actually be built
+ # Report what library types will actually be built
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
$as_echo_n "checking if libtool supports shared libraries... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
$as_echo_n "checking whether to build shared libraries... " >&6; }
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
;;
aix[4-9]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
$as_echo_n "checking whether to build static libraries... " >&6; }
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
$as_echo "$enable_static" >&6; }
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-CC="$lt_save_CC"
+CC=$lt_save_CC
$as_echo_n "(cached) " >&6
else
- for am_cv_pathless_PYTHON in python python2 python3 python3.3 python3.2 python3.1 python3.0 python2.7 python2.6 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0 none; do
+ for am_cv_pathless_PYTHON in python python2 python3 python3.8 python3.7 python3.6 python3.5 python3.4 python3.3 python3.2 python3.1 python3.0 python2.7 python2.6 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0 none; do
test "$am_cv_pathless_PYTHON" = none && break
prog="import sys
# split strings by '.' and convert to numeric. Append some zeros
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_debug" >&5
$as_echo "$enable_debug" >&6; }
-if test "x$enable_debug" != "xno"; then
- TRACE="LogTrace"
-else
- TRACE="#"
-fi
-
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether date can output nanoseconds" >&5
$as_echo_n "checking whether date can output nanoseconds... " >&6; }
date +%s.%N | grep -q 'N'
EXTRA_DIST += $(foreach f,$(HELP_MEDIA),$(foreach lc,$(HELP_LINGUAS),$(wildcard $(lc)/$(f))))
distdir: distdir-help-files
-distdir-help-files:
+distdir-help-files: $(_HELP_LC_FILES)
@for lc in C $(if $(YELP_LC_DIST),$(HELP_LINGUAS)) ; do \
$(MKDIR_P) "$(distdir)/$$lc"; \
for file in $(HELP_FILES); do \
.PHONY: install-help
install-data-am: $(if $(HELP_ID),install-help)
-install-help:
+install-help: $(_HELP_LC_FILES)
@for lc in C $(_HELP_LINGUAS); do \
$(mkinstalldirs) "$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)" || exit 1; \
done
fi
-ac_config_files="$ac_config_files Makefile gtk-doc.pc cmake/Makefile cmake/GtkDocConfig.cmake cmake/GtkDocConfigVersion.cmake gtkdoc/config.py help/Makefile help/manual/Makefile tests/Makefile tests/gobject/Makefile tests/gobject/src/Makefile tests/gobject/docs/Makefile tests/bugs/Makefile tests/bugs/src/Makefile tests/bugs/docs/Makefile tests/annotations/Makefile tests/annotations/src/Makefile tests/annotations/docs/Makefile tests/fail/Makefile tests/fail/src/Makefile tests/fail/docs/Makefile tests/empty/Makefile tests/empty/src/Makefile tests/empty/docs/Makefile tests/program/Makefile tests/program/src/Makefile tests/program/docs/Makefile"
+ac_config_files="$ac_config_files Makefile gtk-doc.pc cmake/Makefile cmake/GtkDocConfig.cmake cmake/GtkDocConfigVersion.cmake gtkdoc/config.py help/Makefile help/manual/Makefile tests/Makefile tests/annotations/Makefile tests/annotations/src/Makefile tests/annotations/docs/Makefile tests/bugs/Makefile tests/bugs/src/Makefile tests/bugs/docs/Makefile tests/empty/Makefile tests/empty/src/Makefile tests/empty/docs/Makefile tests/fail/Makefile tests/fail/src/Makefile tests/fail/docs/Makefile tests/gobject/Makefile tests/gobject/src/Makefile tests/gobject/docs/Makefile tests/program/Makefile tests/program/src/Makefile tests/program/docs/Makefile tests/repro/Makefile tests/repro/src/Makefile tests/repro/docs/Makefile"
ac_config_files="$ac_config_files gtkdoc-check"
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by gtk-doc $as_me 1.26, which was
+This file was extended by gtk-doc $as_me 1.27, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-gtk-doc config.status 1.26
+gtk-doc config.status 1.27
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
compiler \
lt_cv_sys_global_symbol_pipe \
lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
lt_cv_sys_global_symbol_to_c_name_address \
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
nm_file_list_spec \
+lt_cv_truncate_bin \
lt_prog_compiler_no_builtin_flag \
lt_prog_compiler_pic \
lt_prog_compiler_wl \
striplib; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
postuninstall_cmds \
finish_cmds \
sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec; do
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
done
ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'
"help/Makefile") CONFIG_FILES="$CONFIG_FILES help/Makefile" ;;
"help/manual/Makefile") CONFIG_FILES="$CONFIG_FILES help/manual/Makefile" ;;
"tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
- "tests/gobject/Makefile") CONFIG_FILES="$CONFIG_FILES tests/gobject/Makefile" ;;
- "tests/gobject/src/Makefile") CONFIG_FILES="$CONFIG_FILES tests/gobject/src/Makefile" ;;
- "tests/gobject/docs/Makefile") CONFIG_FILES="$CONFIG_FILES tests/gobject/docs/Makefile" ;;
- "tests/bugs/Makefile") CONFIG_FILES="$CONFIG_FILES tests/bugs/Makefile" ;;
- "tests/bugs/src/Makefile") CONFIG_FILES="$CONFIG_FILES tests/bugs/src/Makefile" ;;
- "tests/bugs/docs/Makefile") CONFIG_FILES="$CONFIG_FILES tests/bugs/docs/Makefile" ;;
"tests/annotations/Makefile") CONFIG_FILES="$CONFIG_FILES tests/annotations/Makefile" ;;
"tests/annotations/src/Makefile") CONFIG_FILES="$CONFIG_FILES tests/annotations/src/Makefile" ;;
"tests/annotations/docs/Makefile") CONFIG_FILES="$CONFIG_FILES tests/annotations/docs/Makefile" ;;
- "tests/fail/Makefile") CONFIG_FILES="$CONFIG_FILES tests/fail/Makefile" ;;
- "tests/fail/src/Makefile") CONFIG_FILES="$CONFIG_FILES tests/fail/src/Makefile" ;;
- "tests/fail/docs/Makefile") CONFIG_FILES="$CONFIG_FILES tests/fail/docs/Makefile" ;;
+ "tests/bugs/Makefile") CONFIG_FILES="$CONFIG_FILES tests/bugs/Makefile" ;;
+ "tests/bugs/src/Makefile") CONFIG_FILES="$CONFIG_FILES tests/bugs/src/Makefile" ;;
+ "tests/bugs/docs/Makefile") CONFIG_FILES="$CONFIG_FILES tests/bugs/docs/Makefile" ;;
"tests/empty/Makefile") CONFIG_FILES="$CONFIG_FILES tests/empty/Makefile" ;;
"tests/empty/src/Makefile") CONFIG_FILES="$CONFIG_FILES tests/empty/src/Makefile" ;;
"tests/empty/docs/Makefile") CONFIG_FILES="$CONFIG_FILES tests/empty/docs/Makefile" ;;
+ "tests/fail/Makefile") CONFIG_FILES="$CONFIG_FILES tests/fail/Makefile" ;;
+ "tests/fail/src/Makefile") CONFIG_FILES="$CONFIG_FILES tests/fail/src/Makefile" ;;
+ "tests/fail/docs/Makefile") CONFIG_FILES="$CONFIG_FILES tests/fail/docs/Makefile" ;;
+ "tests/gobject/Makefile") CONFIG_FILES="$CONFIG_FILES tests/gobject/Makefile" ;;
+ "tests/gobject/src/Makefile") CONFIG_FILES="$CONFIG_FILES tests/gobject/src/Makefile" ;;
+ "tests/gobject/docs/Makefile") CONFIG_FILES="$CONFIG_FILES tests/gobject/docs/Makefile" ;;
"tests/program/Makefile") CONFIG_FILES="$CONFIG_FILES tests/program/Makefile" ;;
"tests/program/src/Makefile") CONFIG_FILES="$CONFIG_FILES tests/program/src/Makefile" ;;
"tests/program/docs/Makefile") CONFIG_FILES="$CONFIG_FILES tests/program/docs/Makefile" ;;
+ "tests/repro/Makefile") CONFIG_FILES="$CONFIG_FILES tests/repro/Makefile" ;;
+ "tests/repro/src/Makefile") CONFIG_FILES="$CONFIG_FILES tests/repro/src/Makefile" ;;
+ "tests/repro/docs/Makefile") CONFIG_FILES="$CONFIG_FILES tests/repro/docs/Makefile" ;;
"gtkdoc-check") CONFIG_FILES="$CONFIG_FILES gtkdoc-check" ;;
"gtkdoc-depscan") CONFIG_FILES="$CONFIG_FILES gtkdoc-depscan" ;;
"gtkdoc-fixxref") CONFIG_FILES="$CONFIG_FILES gtkdoc-fixxref" ;;
;;
"libtool":C)
- # See if we are running on zsh, and set the options which allow our
+ # See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
+ if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
- cfgfile="${ofile}T"
+ cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# Generated automatically by $as_me ($PACKAGE) $VERSION
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# The names of the tagged configurations supported by this script.
-available_tags=""
+available_tags=''
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
# ### BEGIN LIBTOOL CONFIG
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
# Specify filename containing input files for \$NM.
nm_file_list_spec=$lt_nm_file_list_spec
-# The root where to search for dependent libraries,and in which our libraries should be installed.
+# The root where to search for dependent libraries,and where our libraries should be installed.
lt_sysroot=$lt_sysroot
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
# The name of the directory that contains temporary libtool files.
objdir=$objdir
# Compile-time system search path for libraries.
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute
_LT_EOF
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
esac
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
# We use sed instead of cat because bash on DJGPP gets confused if
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
- if test x"$xsi_shell" = xyes; then
- sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-func_dirname ()\
-{\
-\ case ${1} in\
-\ */*) func_dirname_result="${1%/*}${2}" ;;\
-\ * ) func_dirname_result="${3}" ;;\
-\ esac\
-} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_basename ()$/,/^} # func_basename /c\
-func_basename ()\
-{\
-\ func_basename_result="${1##*/}"\
-} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-func_dirname_and_basename ()\
-{\
-\ case ${1} in\
-\ */*) func_dirname_result="${1%/*}${2}" ;;\
-\ * ) func_dirname_result="${3}" ;;\
-\ esac\
-\ func_basename_result="${1##*/}"\
-} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-func_stripname ()\
-{\
-\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-\ # positional parameters, so assign one to ordinary parameter first.\
-\ func_stripname_result=${3}\
-\ func_stripname_result=${func_stripname_result#"${1}"}\
-\ func_stripname_result=${func_stripname_result%"${2}"}\
-} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-func_split_long_opt ()\
-{\
-\ func_split_long_opt_name=${1%%=*}\
-\ func_split_long_opt_arg=${1#*=}\
-} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-func_split_short_opt ()\
-{\
-\ func_split_short_opt_arg=${1#??}\
-\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-func_lo2o ()\
-{\
-\ case ${1} in\
-\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-\ *) func_lo2o_result=${1} ;;\
-\ esac\
-} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_xform ()$/,/^} # func_xform /c\
-func_xform ()\
-{\
- func_xform_result=${1%.*}.lo\
-} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_arith ()$/,/^} # func_arith /c\
-func_arith ()\
-{\
- func_arith_result=$(( $* ))\
-} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_len ()$/,/^} # func_len /c\
-func_len ()\
-{\
- func_len_result=${#1}\
-} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-fi
-
-if test x"$lt_shell_append" = xyes; then
- sed -e '/^func_append ()$/,/^} # func_append /c\
-func_append ()\
-{\
- eval "${1}+=\\${2}"\
-} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-func_append_quoted ()\
-{\
-\ func_quote_for_eval "${2}"\
-\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-fi
-
-
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
dnl Makefile can only cope with that, i.e. use 1.1, 1.2, 1.3 ... 9.9.
dnl FIXME: I can't see anything failing (1.14.1), lets try to use a three digit
dnl number for the development version
-m4_define(gtk_doc_version, 1.26)
+m4_define(gtk_doc_version, 1.27)
AC_INIT([gtk-doc],[gtk_doc_version],[http://bugzilla.gnome.org/enter_bug.cgi?product=gtk-doc],[gtk-doc])
[enable_debug="no"])
AC_MSG_RESULT($enable_debug)
-if test "x$enable_debug" != "xno"; then
- TRACE="LogTrace"
-else
- TRACE="#"
-fi
-AC_SUBST(TRACE)
-
dnl check what date format we can use for the makefile tracing in tests
dnl this is mostly to detect the date command on macosx that is quite cripled
dnl and broken too
help/Makefile
help/manual/Makefile
tests/Makefile
-tests/gobject/Makefile
-tests/gobject/src/Makefile
-tests/gobject/docs/Makefile
-tests/bugs/Makefile
-tests/bugs/src/Makefile
-tests/bugs/docs/Makefile
tests/annotations/Makefile
tests/annotations/src/Makefile
tests/annotations/docs/Makefile
-tests/fail/Makefile
-tests/fail/src/Makefile
-tests/fail/docs/Makefile
+tests/bugs/Makefile
+tests/bugs/src/Makefile
+tests/bugs/docs/Makefile
tests/empty/Makefile
tests/empty/src/Makefile
tests/empty/docs/Makefile
+tests/fail/Makefile
+tests/fail/src/Makefile
+tests/fail/docs/Makefile
+tests/gobject/Makefile
+tests/gobject/src/Makefile
+tests/gobject/docs/Makefile
tests/program/Makefile
tests/program/src/Makefile
tests/program/docs/Makefile
+tests/repro/Makefile
+tests/repro/src/Makefile
+tests/repro/docs/Makefile
])
dnl run chmod on these after parsing them.
+# -*- mode: makefile -*-
+#
+# Makefile.am - template makefile for gtk-doc module
+# Copyright (C) 2007-2017 Stefan Sauer
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the above copyright owner gives unlimited
+# permission to copy, distribute and modify this Makefile.am template.
+# You need not follow the terms of the GNU General Public License when
+# using or distributing such Makefile.am files, even though portions of
+# the text of the Makefile.am appear in them. The GNU General Public
+# License (GPL) does govern all other use of the material that constitutes
+# the Makefile.am template.
+
# This is a blank Makefile.am for using gtk-doc.
# Copy this to your project's API docs directory and modify the variables to
# suit your project. See the GTK+ Makefiles in gtk+/docs/reference for examples
# -*- mode: makefile -*-
-
+#
+# gtk-doc.make - make rules for gtk-doc
+# Copyright (C) 2003 James Henstridge
+# 2004-2007 Damon Chaplin
+# 2007-2017 Stefan Sauer
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
####################################
# Everything below here is generic #
####################################
sgml.stamp: sgml-build.stamp
@true
+$(DOC_MAIN_SGML_FILE): sgml-build.stamp
+ @true
+
xml/gtkdocentities.ent: Makefile
$(GTK_DOC_V_XML)$(MKDIR_P) $(@D) && ( \
echo "<!ENTITY package \"$(PACKAGE)\">"; \
-dnl -*- mode: autoconf -*-
+# -*- mode: autoconf -*-
+#
+# gtk-doc.m4 - configure macro to check for gtk-doc
+# Copyright (C) 2003 James Henstridge
+# 2007-2017 Stefan Sauer
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the above copyright owner gives unlimited
+# permission to copy, distribute and modify the configure scripts that
+# are the output of Autoconf when processing the Macro. You need not
+# follow the terms of the GNU General Public License when using or
+# distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
# serial 2
# -*- mode: makefile -*-
+#
+# gtk-doc.make - make rules for gtk-doc
+# Copyright (C) 2003 James Henstridge
+# 2004-2007 Damon Chaplin
+# 2007-2017 Stefan Sauer
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
####################################
# Everything below here is generic #
sgml.stamp: sgml-build.stamp
@true
+$(DOC_MAIN_SGML_FILE): sgml-build.stamp
+ @true
+
xml/gtkdocentities.ent: Makefile
$(GTK_DOC_V_XML)$(MKDIR_P) $(@D) && ( \
echo "<!ENTITY package \"$(PACKAGE)\">"; \
help='The directory where gtk-doc generated documentation is'
'installed.')
parser.add_argument('--extra-dir', default=[], action='append',
- help='Directories to recursively scan for indices (index.sgml)'
+ help='Directories to recursively scan for indices (*.devhelp2)'
'in addition to HTML_DIR')
parser.add_argument('--src-lang', default='c',
help='Programing language used for syntax highlighting. The'
import re
from glob import glob
+from . import common
+
class FileFormatError(Exception):
pass
def check_empty(filename):
- with open(filename) as f:
+ with open(filename, "rb") as f:
count = sum(1 for line in f if line.strip())
return count
def check_includes(filename):
# Check that each XML file in the xml directory is included in doc_main_file
- with open(filename) as f:
+ with common.open_text(filename) as f:
lines = f.read().splitlines()
num_missing = 0
for include in glob('xml/*.xml'):
def read_file(filename):
- with open(filename) as f:
+ with common.open_text(filename) as f:
return f.read().splitlines()
makefilename = 'Makefile.am'
if not os.path.exists(makefilename):
makefilename = 'Makefile'
- makefile = read_file(makefilename)
+ makefile = []
+ try:
+ makefile = read_file(makefilename)
+ except (OSError, IOError):
+ pass
# For historic reasons tests are launched in srcdir
workdir = os.environ.get('BUILDDIR', None)
import re
import subprocess
import sys
+import six
+import codecs
from . import config
+def open_text(filename, mode='r', encoding='utf-8'):
+ """An open() which removes some differences between Python 2 and 3 and
+ has saner defaults.
+
+ Unlike the builtin open by default utf-8 is use and not the locale
+ encoding (which is ANSI on Windows for example, not very helpful)
+
+ For Python 2, files are opened in text mode like with Python 3.
+ """
+
+ if mode not in ('r', 'w'):
+ raise ValueError("mode %r not supported, must be 'r' or 'w'" % mode)
+
+ if six.PY3:
+ return open(filename, mode, encoding=encoding)
+ else:
+ # We can't use io.open() here as its write method is too strict and
+ # only allows unicode instances and not everything in the codebase
+ # forces unicode at the moment. codecs.open() on the other hand
+ # happily takes ASCII str and decodes it.
+ return codecs.open(filename, mode, encoding=encoding)
+
+
def setup_logging():
"""Check GTKDOC_TRACE environment variable.
logging.basicConfig(stream=sys.stdout,
level=logging.getLevelName(log_level.upper()),
format='%(asctime)s:%(filename)s:%(funcName)s:%(lineno)d:%(levelname)s:%(message)s')
- # When redirecting the output on python2 we get UnicodeEncodeError:
- if not sys.stdout.encoding:
- import codecs
- sys.stdout = codecs.getwriter('utf8')(sys.stdout)
+ # When redirecting the output on python2 or if run with a non utf-8 locale
+ # we get UnicodeEncodeError:
+ encoding = sys.stdout.encoding
+ if 'PYTHONIOENCODING' not in os.environ and (not encoding or encoding != 'UTF-8'):
+ sys.stdout.flush()
+ if six.PY3:
+ sys.stdout = open(sys.stdout.fileno(), mode='w', encoding='utf8', buffering=1)
+ else:
+ import codecs
+ sys.stdout = codecs.getwriter('utf8')(sys.stdout)
def UpdateFileIfChanged(old_file, new_file, make_backup):
logging.debug("Comparing %s with %s...", old_file, new_file)
if os.path.exists(old_file):
- old_contents = open(old_file, 'rb').read()
- new_contents = open(new_file, 'rb').read()
+ old_contents = new_contents = None
+ with open(old_file, 'rb') as f:
+ old_contents = f.read()
+ with open(new_file, 'rb') as f:
+ new_contents = f.read()
if old_contents == new_contents:
os.unlink(new_file)
logging.debug("-> content is the same.")
module_name (string): The module, e.g. 'glib-2.0'
Returns:
- str: the doc directory
+ str: the doc directory or None
"""
- path = subprocess.check_output([config.pkg_config, '--variable=prefix', module_name], universal_newlines=True)
+ path = None
+ try:
+ path = subprocess.check_output([config.pkg_config, '--variable=prefix', module_name], universal_newlines=True)
+ except subprocess.CalledProcessError:
+ return None
return os.path.join(path.strip(), 'share/gtk-doc/html')
filename = filename or "unknown"
# TODO: write to stderr
- print ("%s:%d: warning: %s" % (filename, line, message))
+ print("%s:%d: warning: %s" % (filename, line, message))
def CreateValidSGMLID(xml_id):
-version = "1.26"
+version = "1.27"
# tools
dblatex = '/usr/bin/dblatex'
def Run(options):
- # logging.basicConfig(level=logging.INFO)
-
path_prefix = ''
m = re.search(r'(.*?)/share/gtk-doc/html', options.html_dir)
if m:
# We scan the directory containing GLib and any directories in GNOME2_PATH
# first, but these will be overriden by any later scans.
dir = common.GetModuleDocDir('glib-2.0')
- if os.path.exists(dir):
+ if dir and os.path.exists(dir):
# Some predefined link targets to get links into type hierarchies as these
# have no targets. These are always absolute for now.
Links['GBoxed'] = dir + '/gobject/gobject-Boxed-Types.html'
path = os.environ.get('GNOME2_PATH')
if path:
for dir in path.split(':'):
- dir += '/share/gtk-doc/html'
+ dir += 'share/gtk-doc/html'
if os.path.exists(dir) and dir != options.html_dir:
logging.info('Scanning GNOME2_PATH directory: %s', dir)
ScanIndices(dir, (re.search(prefix_match, dir) is None))
elif entry.endswith('.devhelp2.gz') and not os.path.exists(full_entry[:-3]):
# debian/ubuntu started to compress this as *devhelp2.gz :/
print('''Please fix https://bugs.launchpad.net/ubuntu/+source/gtk-doc/+bug/1466210 . For now run:
-gunzip %d
+gunzip %s
''' % full_entry)
# we could consider supporting: gzip module
logging.info('Scanning index file=%s, absolute=%d, dir=%s', file, use_absolute_links, dir)
- for line in open(file):
+ for line in common.open_text(file):
m = re.search(r' link="([^#]*)#([^"]*)"', line)
if m:
link = m.group(1) + '#' + m.group(2)
def ReadSections(options):
- for line in open(options.module + '-sections.txt'):
+ for line in common.open_text(options.module + '-sections.txt'):
m1 = re.search(r'^<SUBSECTION\s*(.*)>', line)
if line.startswith('#') or line.strip() == '':
continue
def FixHTMLFile(options, file):
logging.info('Fixing file: %s', file)
- content = open(file).read()
- if sys.version_info < (3,):
- content = content.decode('utf-8')
+ content = common.open_text(file).read()
if config.highlight:
# FIXME: ideally we'd pass a clue about the example language to the highligher
new_file = file + '.new'
content = '\n'.join(lines)
- if sys.version_info < (3,):
- content = content.encode('utf-8')
- open(new_file, 'w').write(content)
+ with common.open_text(new_file, 'w') as h:
+ h.write(content)
os.unlink(file)
os.rename(new_file, file)
# format source
# TODO(ensonic): use p.communicate()
- script = "echo 'let html_number_lines=0|let html_use_css=1|let html_use_xhtml=1|e %s|syn on|set syntax=%s|run! syntax/2html.vim|w! %s.html|qa!' | " % (
+ script = "echo 'let html_number_lines=0|let html_use_css=1|let html_use_xhtml=1|e %s|syn on|set syntax=%s|run! plugin/tohtml.vim|run! syntax/2html.vim|w! out.html|qa!' | " % (
temp_source_file, options.src_lang, temp_source_file)
script += "%s -n -e -u NONE -T xterm >/dev/null" % config.highlight
subprocess.check_call([script], shell=True)
- highlighted_source = open(temp_source_file + ".html").read()
- highlighted_source = re.sub(r'.*<pre\b[^>]*>\n', '', highlighted_source, flags=re.MULTILINE)
- highlighted_source = re.sub(r'</pre>.*', '', highlighted_source, flags=re.MULTILINE)
+ highlighted_source = common.open_text(temp_source_file + ".html").read()
+ highlighted_source = re.sub(r'.*<pre\b[^>]*>\n', '', highlighted_source, flags=re.DOTALL)
+ highlighted_source = re.sub(r'</pre>.*', '', highlighted_source, flags=re.DOTALL)
# need to rewrite the stylesheet classes
highlighted_source = highlighted_source.replace('<span class="Comment">', '<span class="comment">')
markers_rest = {k: v for k, v in markers.items() if v and k != closest_marker}
if closest_marker == '![' or closest_marker == '[':
+ # 'id-ref' : local id reference
+ # 'title' : link short description/alt-text/tooltip
+ # 'a' : linked text
+ # 'href' : external link
+ # 'is-media': is link to media object
element = None
# FIXME: '(?R)' is a recursive subpattern
# m = re.search(r'\[((?:[^][]|(?R))*)\]', text)
m = re.search(r'\[((?:[^][])*)\]', text)
if ']' in text and m:
- element = {'!': text[0] == '!',
- 'a': m.group(1),
+ element = {'is-media': text[0] == '!',
+ 'a': EscapeEntities(m.group(1)),
}
offset = len(m.group(0))
- if element['!']:
+ if element['is-media']:
offset += 1
logging.debug("Recursive md-expr match: off=%d, text='%s', match='%s'", offset, text, m.group(1))
remaining_text = text[offset:]
+ # (link "alt-text")
m2 = re.search(r'''^\([ ]*([^)'"]*?)(?:[ ]+['"](.+?)['"])?[ ]*\)''', remaining_text)
+ # [id-reference]
m3 = re.search(r'^\s*\[([^\]<]*?)\]', remaining_text)
if m2:
- element['»'] = m2.group(1)
+ element['href'] = m2.group(1)
if m2.group(2):
- element['#'] = m2.group(2)
+ element['title'] = m2.group(2)
offset += len(m2.group(0))
elif m3:
- element['ref'] = m3.group(1)
+ element['id-ref'] = m3.group(1)
offset += len(m3.group(0))
else:
element = None
if element:
- if '»' in element:
- element['»'] = element['»'].replace('&', '&').replace('<', '<')
+ logging.debug("output link for", element)
- if element['!']:
+ if 'href' in element:
+ element['href'] = EscapeEntities(element['href'])
+
+ if element['is-media']:
+ # media link
markup += '<inlinemediaobject><imageobject><imagedata fileref="' + \
- element['»'] + '"></imagedata></imageobject>'
+ element['href'] + '"></imagedata></imageobject>'
if 'a' in element:
markup += "<textobject><phrase>" + element['a'] + "</phrase></textobject>"
- markup += "</inlinemediaobject>"
- elif 'ref' in element:
+ markup += "</inlinemediaobject>"
+ elif 'id-ref' in element:
+ # internal link
element['a'] = MarkDownParseSpanElementsInner(element['a'], markers_rest)
- markup += '<link linkend="' + element['ref'] + '"'
+ markup += '<link linkend="' + element['id-ref'] + '"'
- if '#' in element:
+ if 'title' in element:
# title attribute not supported
pass
markup += '>' + element['a'] + "</link>"
else:
+ # external link
element['a'] = MarkDownParseSpanElementsInner(element['a'], markers_rest)
- markup += '<ulink url="' + element['»'] + '"'
+ markup += '<ulink url="' + element['href'] + '"'
- if '#' in element:
+ if 'title' in element:
# title attribute not supported
pass
m5 = re.search(r'^<([A-Za-z0-9._-]+?@[A-Za-z0-9._-]+?)>', text)
m6 = re.search(r'^<[^>]+?>', text)
if m4:
- element_url = m4.group(1).replace('&', '&').replace('<', '<')
+ element_url = EscapeEntities(m4.group(1))
markup += '<ulink url="' + element_url + '">' + element_url + '</ulink>'
offset = len(m4.group(0))
elif closest_marker == "`":
m7 = re.search(r'^(`+)([^`]+?)\1(?!`)', text)
if m7:
- element_text = m7.group(2)
+ element_text = EscapeEntities(m7.group(2))
markup += "<literal>" + element_text + "</literal>"
offset = len(m7.group(0))
else:
return text
+def EscapeEntities(text):
+ return text.replace('&', '&').replace('<', '<').replace('<', '>')
+
+
def ReplaceEntities(text):
entities = [["<", '<'],
[">", '>'],
["&", '&'], # Do this last, or the others get messed up.
]
- # Expand entities in <programlisting> even inside CDATA since
- # we changed the definition of |[ to add CDATA
for i in entities:
text = re.sub(i[0], i[1], text)
return text
import os
import re
import string
-import sys
from . import common, md_to_db
'nullable': "NULL may be passed as the value in, out, in-out; or as a return value.",
'not nullable': "NULL must not be passed as the value in, out, in-out; or as a return value.",
'optional': "NULL may be passed instead of a pointer to a location.",
+ 'not optional': "NULL must not be passed as the pointer to a location.",
'array': "Parameter points to an array of items.",
'attribute': "Deprecated free-form custom annotation, replaced by (attributes) annotation.",
'attributes': "Free-form key-value pairs.",
OutputSinceIndexes()
OutputAnnotationGlossary()
- open(os.path.join(ROOT_DIR, 'sgml.stamp'), 'w').write('timestamp')
+ with open(os.path.join(ROOT_DIR, 'sgml.stamp'), 'w') as h:
+ h.write('timestamp')
def OutputObjectList():
old_object_index = os.path.join(DB_OUTPUT_DIR, "object_index.sgml")
new_object_index = os.path.join(DB_OUTPUT_DIR, "object_index.new")
- OUTPUT = open(new_object_index, 'w')
+ OUTPUT = common.open_text(new_object_index, 'w')
OUTPUT.write('''%s
<informaltable pgwide="1" frame="none">
"""
logging.info("Reading: %s", file)
- INPUT = open(file)
+ INPUT = common.open_text(file)
filename = ''
book_top = ''
book_bottom = ''
elif re.search(r'^<\/SECTION>', line):
logging.info("End of section: %s", title)
+ # TODO: also output if we have sections docs?
+ # long_desc = SymbolDocs.get(filename + ":Long_Description")
if num_symbols > 0:
# collect documents
book_bottom += " <xi:include href=\"xml/%s.xml\"/>\n" % filename
rerun = True
break
- OUTPUT = open(new_glossary, 'w')
+ OUTPUT = common.open_text(new_glossary, 'w')
OUTPUT.write('''%s
<glossary id="annotation-glossary">
subsection = ''
logging.info("Reading: %s", file)
- INPUT = open(file)
+ INPUT = common.open_text(file)
for line in INPUT:
if line.startswith('#'):
continue
elif dtype == 'USER_FUNCTION':
return OutputFunction(symbol, declaration, dtype)
else:
- sys.exit("Unknown symbol type " + dtype)
+ logging.warning("Unknown symbol type %s for symbol %s", dtype, symbol)
+ return ('', '')
def OutputSymbolTraits(symbol):
desc += "\n"
desc += OutputSymbolExtraLinks(symbol)
- if symbol in DeclarationConditional:
+ if symbol not in DeclarationConditional:
decl_out = CreateValidSGML(declaration)
desc += "<programlisting language=\"C\">%s</programlisting>\n" % decl_out
old_db_file = os.path.join(DB_OUTPUT_DIR, file + '.xml')
new_db_file = os.path.join(DB_OUTPUT_DIR, file + '.xml.new')
- OUTPUT = open(new_db_file, 'w')
+ OUTPUT = common.open_text(new_db_file, 'w')
object_anchors = ''
for fobject in file_objects:
old_db_file = os.path.join(DB_OUTPUT_DIR, program + ".xml")
new_db_file = os.path.join(DB_OUTPUT_DIR, program + ".xml.new")
- OUTPUT = open(new_db_file, 'w')
+ OUTPUT = common.open_text(new_db_file, 'w')
OUTPUT.write('''%s
<refentry id="%s">
old_db_file = os.path.join(DB_OUTPUT_DIR, basename)
new_db_file = os.path.join(DB_OUTPUT_DIR, basename + ".new")
- contents = open(file).read()
+ contents = common.open_text(file).read()
- OUTPUT = open(new_db_file, 'w')
+ OUTPUT = common.open_text(new_db_file, 'w')
OUTPUT.write(ExpandAbbreviations(basename + " file", contents))
OUTPUT.close()
def GetDocbookHeader(main_file):
if os.path.exists(main_file):
- INPUT = open(main_file)
+ INPUT = common.open_text(main_file)
header = ''
for line in INPUT:
if re.search(r'^\s*<(book|chapter|article)', line):
old_file = os.path.join(DB_OUTPUT_DIR, MODULE + "-doc.top")
new_file = os.path.join(DB_OUTPUT_DIR, MODULE + "-doc.top.new")
- OUTPUT = open(new_file, 'w')
+ OUTPUT = common.open_text(new_file, 'w')
OUTPUT.write(book_top)
OUTPUT.close()
old_file = os.path.join(DB_OUTPUT_DIR, MODULE + "-doc.bottom")
new_file = os.path.join(DB_OUTPUT_DIR, MODULE + "-doc.bottom.new")
- OUTPUT = open(new_file, 'w')
+ OUTPUT = common.open_text(new_file, 'w')
OUTPUT.write(book_bottom)
OUTPUT.close()
# If the main docbook file hasn't been created yet, we create it here.
# The user can tweak it later.
if main_file and not os.path.exists(main_file):
- OUTPUT = open(main_file, 'w')
+ OUTPUT = common.open_text(main_file, 'w')
logging.info("no master doc, create default one at: " + main_file)
if '::' in symbol:
o, s = symbol.split('::', 1)
symbol = '%s-%s' % (o, s)
- text = '“' + s + '”'
+ text = u'“' + s + u'”'
# If the symbol is in the form "Object:property", then change the symbol to
# "Object--property" and use "property" as the text.
if ':' in symbol:
o, p = symbol.split(':', 1)
symbol = '%s--%s' % (o, p)
- text = '“' + p + '”'
+ text = u'“' + p + u'”'
if tag != '':
text = tagify(text, tag)
symbol = '%s::%s' % (gobject, name)
sid = common.CreateValidSGMLID('%s-%s' % (gobject, name))
- desc += "<refsect2 id=\"%s\" role=\"signal\"><title>The <literal>“%s”</literal> signal</title>\n" % (
+ desc += u"<refsect2 id=\"%s\" role=\"signal\"><title>The <literal>“%s”</literal> signal</title>\n" % (
sid, name)
desc += MakeIndexterms(symbol, sid)
desc += "\n"
arg_synop = "<row><entry role=\"property_type\">%s</entry><entry role=\"property_name\"><link linkend=\"%s\">%s</link></entry><entry role=\"property_flags\">%s</entry></row>\n" % (
type_output, sid, name, flags_string)
- arg_desc = "<refsect2 id=\"%s\" role=\"property\"><title>The <literal>“%s”</literal> %s</title>\n" % (
+ arg_desc = u"<refsect2 id=\"%s\" role=\"property\"><title>The <literal>“%s”</literal> %s</title>\n" % (
sid, name, kind)
arg_desc += MakeIndexterms(symbol, sid)
arg_desc += "\n"
arg_desc += OutputSymbolExtraLinks(symbol)
- arg_desc += "<programlisting> “%s”%s %s</programlisting>\n" % (name, pad1, type_output)
+ arg_desc +=
u"<programlisting> “%s”%s %s</programlisting>\n" % (name, pad1, type_output)
arg_desc += blurb
if symbol in SymbolAnnotations:
param_desc = SymbolAnnotations[symbol]
logging.info("Scanning source file: %s", ifile)
- SRCFILE = open(ifile)
+ SRCFILE = common.open_text(ifile)
in_comment_block = False
symbol = None
in_part = ''
buffer_deprecated = ''
buffer_descriptions = ''
- UNDOCUMENTED = open(new_undocumented_file, 'w')
+ UNDOCUMENTED = common.open_text(new_undocumented_file, 'w')
for symbol in sorted(iterkeys(AllSymbols)):
# FIXME: should we print common.LogWarnings for undocumented stuff?
old_undeclared_file = os.path.join(ROOT_DIR, MODULE + "-undeclared.txt")
new_undeclared_file = os.path.join(ROOT_DIR, MODULE + "-undeclared.new")
- UNDECLARED = open(new_undeclared_file, 'w')
+ UNDECLARED = common.open_text(new_undeclared_file, 'w')
if UndeclaredSymbols:
UNDECLARED.write("\n".join(sorted(iterkeys(UndeclaredSymbols))))
old_unused_file = os.path.join(ROOT_DIR, MODULE + "-unused.txt")
new_unused_file = os.path.join(ROOT_DIR, MODULE + "-unused.new")
- UNUSED = open(new_unused_file, 'w')
+ UNUSED = common.open_text(new_unused_file, 'w')
for symbol in sorted(iterkeys(Declarations)):
if not symbol in DeclarationOutput:
def OutputAllSymbols():
"""Outputs list of all symbols to a file."""
- SYMBOLS = open(os.path.join(ROOT_DIR, MODULE + "-symbols.txt"), 'w')
+ SYMBOLS = common.open_text(os.path.join(ROOT_DIR, MODULE + "-symbols.txt"), 'w')
for symbol in sorted(iterkeys(AllSymbols)):
SYMBOLS.write(symbol + "\n")
def OutputSymbolsWithoutSince():
"""Outputs list of all symbols without a since tag to a file."""
- SYMBOLS = open(os.path.join(ROOT_DIR, MODULE + "-nosince.txt"), 'w')
+ SYMBOLS = common.open_text(os.path.join(ROOT_DIR, MODULE + "-nosince.txt"), 'w')
for symbol in sorted(iterkeys(SourceSymbolDocs)):
if symbol in Since:
DeclarationConditional.clear()
DeclarationOutput.clear()
- INPUT = open(ifile)
+ INPUT = common.open_text(ifile)
declaration_type = ''
declaration_name = None
declaration = None
line_number = 0
for line in INPUT:
line_number += 1
+ # logging.debug("%s:%d: %s", ifile, line_number, line)
if not declaration_type:
m1 = re.search(r'^<([^>]+)>', line)
if m1:
if not os.path.isfile(ifile):
return
- INPUT = open(ifile)
+ INPUT = common.open_text(ifile)
line_number = 0
for line in INPUT:
line_number += 1
logging.debug('no *-hierarchy.tx')
return
- INPUT = open(ifile)
+ INPUT = common.open_text(ifile)
# Only emit objects if they are supposed to be documented, or if
# they have documented children. To implement this, we maintain a
logging.debug('got %d entries for hierarchy', len(tree))
- OUTPUT = open(new_tree_index, 'w')
+ OUTPUT = common.open_text(new_tree_index, 'w')
OUTPUT.write(MakeDocHeader("screen") + "\n<screen>\n" + AddTreeLineArt(tree) + "\n</screen>\n")
OUTPUT.close()
if not os.path.isfile(ifile):
return
- INPUT = open(ifile)
+ INPUT = common.open_text(ifile)
for line in INPUT:
line = line.strip()
if not os.path.isfile(ifile):
return
- INPUT = open(ifile)
+ INPUT = common.open_text(ifile)
for line in INPUT:
line = line.strip()
if not os.path.isfile(ifile):
return
- INPUT = open(ifile)
+ INPUT = common.open_text(ifile)
line_number = 0
for line in INPUT:
line_number += 1
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
+import logging
import os
import sys
import subprocess
if os.environ.get("GTKDOC_PROFILE", '') == '':
for path in options.path:
command += ['--path', path]
+ logging.info('running "%s"', ' '.join(command + args))
return subprocess.call(command + args)
else:
command += ['--profile']
for path in options.path:
command += ['--path', path]
+ logging.info('running "%s"', ' '.join(command + args))
return subprocess.call(command + args, stderr=open('profile.txt', 'w'))
for f in glob(styledir + '/*.png') + glob(styledir + '/*.css'):
shutil.copy(f, '.')
- open('../html.stamp', 'w').write('timestamp')
+ with open('../html.stamp', 'w') as h:
+ h.write('timestamp')
return res
# Support both Python 2 and 3
from __future__ import print_function
+import logging
import os
import sys
import subprocess
# copied from the header into docs under xml
for path in options.path:
command += ['--path', path]
+ logging.info('running "%s"', ' '.join(command + args))
pc = subprocess.Popen(command + args, stderr=subprocess.PIPE)
(o, stde) = pc.communicate()
- open('profile.txt', 'wb').write(stde)
+ with open('profile.txt', 'wb') as h:
+ h.write(stde)
return pc.returncode
print("dblatex or fop must be installed to use gtkdoc-mkpdf.")
res = 1
- open('pdf.stamp', 'w').write('timestamp')
+ with open('pdf.stamp', 'w') as h:
+ h.write('timestamp')
return res
import logging
import os
import re
+import subprocess
from . import common
# first, but these will be overriden by any later scans.
if "GNOME2_PATH" in os.environ:
for dir in os.environ["GNOME2_PATH"].split(':'):
- dir = os.path.join(dir, "/share/gtk-doc/html")
+ dir = os.path.join(dir, "share/gtk-doc/html")
if os.path.isdir(dir):
log(options, "Prepending GNOME2_PATH directory:", dir)
other_dirs = [dir] + other_dirs
- dir = common.GetModuleDocDir('glib-2.0')
- log(options, "Prepending GLib directory", dir)
- other_dirs = [dir] + other_dirs
+ glib_dir = common.GetModuleDocDir('glib-2.0')
+ if glib_dir:
+ log(options, "Prepending GLib directory", glib_dir)
+ other_dirs = [glib_dir] + other_dirs
# Check all other dirs, but skip already scanned dirs ord subdirs of those
elif entry.endswith('.devhelp2.gz') and not os.path.exists(full_entry[:-3]):
# debian/ubuntu started to compress this as *devhelp2.gz :/
print('''Please fix https://bugs.launchpad.net/ubuntu/+source/gtk-doc/+bug/1466210 . For now run:
-gunzip %d/%s
+gunzip %s/%s
''' % (scan_dir, entry))
# we could consider supporting: gzip module
def ReadDevhelp(dir, file):
onlinedir = None
- for line in open(os.path.join(dir, file)):
+ for line in common.open_text(os.path.join(dir, file)):
# online must come before chapter/functions
if '<chapters' in line or '<functions' in line:
break
def ReadIndex(dir, file):
onlinedir = None
- for line in open(os.path.join(dir, file)):
+ for line in common.open_text(os.path.join(dir, file)):
# ONLINE must come before any ANCHORs
if '<ANCHOR' in line:
break
def repl_func(match):
return match.group(1) + RebaseLink(match.group(2), options) + match.group(3)
- contents = open(filename).read()
+ contents = common.open_text(filename).read()
processed = re.sub(regex, repl_func, contents)
newfilename = filename + '.new'
- open(newfilename, 'w').write(processed)
+ with common.open_text(newfilename, 'w') as h:
+ h.write(processed)
os.unlink(filename)
os.rename(newfilename, filename)
for dir in options.source_dir:
ScanHeaders(dir, section_list, decl_list, get_types, options)
- with open(new_decl_list, 'w') as f:
+ with common.open_text(new_decl_list, 'w') as f:
for section in sorted(iterkeys(section_list)):
f.write(section_list[section])
- with open(new_decl, 'w') as f:
+ with common.open_text(new_decl, 'w') as f:
for decl in decl_list:
f.write(decl)
if options.rebuild_types:
- with open(new_types, 'w') as f:
+ with common.open_text(new_types, 'w') as f:
for func in sorted(get_types):
f.write(func + '\n')
logging.info('Scanning %s', input_file)
- for line in open(input_file):
+ for line in common.open_text(input_file):
# If this is a private header, skip it.
if re.search(r'%^\s*/\*\s*<\s*private_header\s*>\s*\*/', line):
return
symbol = m19.group(1)
decl = line[m19.end():]
- previous_line_words = previous_line.strip().split()
+ previous_line_strip = previous_line.strip()
+ previous_line_words = previous_line_strip.split()
- if not previous_line.strip().startswith('G_INLINE_FUNC'):
+ if not previous_line_strip.startswith('G_INLINE_FUNC'):
if not previous_line_words or previous_line_words[0] != 'static':
- # $1 $2
+ # $ 1 $2
pm = re.search(r'^\s*(?:\b(?:extern%s)\s*)*((?:const\s+|G_CONST_RETURN\s+|signed\s+|unsigned\s+|long\s+|short\s+|struct\s+|union\s+|enum\s+)*\w+)((?:\s*(?:\*+|\bconst\b|\bG_CONST_RETURN\b))*)\s*$' %
ignore_decorators, previous_line)
if pm:
logging.info('skip block after inline function')
# now we we need to skip a whole { } block
skip_block = 1
- # $1 $2
+ # $1 $2
pm = re.search(r'^\s*(?:\b(?:extern|G_INLINE_FUNC%s)\s*)*((?:const\s+|G_CONST_RETURN\s+|signed\s+|unsigned\s+|long\s+|short\s+|struct\s+|union\s+|enum\s+)*\w+)((?:\s*(?:\*+|\bconst\b|\bG_CONST_RETURN\b))*)\s*$' %
ignore_decorators, previous_line)
if pm:
import os
import string
import subprocess
+import shlex
from . import common, config
static void output_object_args (FILE *fp, GType object_type);
int
-main (int argc, char *argv[])
+main (${main_func_params})
{
${type_init_func};
"""
-def run(options):
+def execute_command(options, description, command):
+ if options.verbose:
+ call = subprocess.check_call
+ else:
+ call = subprocess.check_output
+
+ try:
+ call(command)
+ except subprocess.CalledProcessError as e:
+ logging.warning('%s scanner failed: %d, command: %s', description,
+ e.returncode, ' '.join(command))
+ return e.returncode
+ except OSError as e:
+ logging.warning('%s scanner failed: %s, command: %s', description,
+ str(e), ' '.join(command))
+ return 1
+ return 0
+
+def run(options):
c_file = options.module + '-scan.c'
- output = open(c_file, 'w')
+ output = common.open_text(c_file, 'w')
base_filename = os.path.join(options.output_dir, options.module)
old_signals_filename = base_filename + '.signals'
get_types = ""
ntypes = 1
- for line in open(options.types):
+ for line in common.open_text(options.types):
if line.startswith('#include'):
includes += line
elif line.startswith('%') or line.strip() == '':
# substitute local vars in the template
type_init_func = options.type_init_func
+ main_func_params = "int argc, char *argv[]"
+ if "argc" in type_init_func and "argv" not in type_init_func:
+ main_func_params = "int argc, G_GNUC_UNUSED char *argv[]"
+ elif "argc" not in type_init_func and "argv" in type_init_func:
+ main_func_params = "G_GNUC_UNUSED int argc, char *argv[]"
+ elif "argc" not in type_init_func and "argv" not in type_init_func:
+ main_func_params = "void"
+
output.write(string.Template(MAIN_CODE).substitute(locals()))
if options.query_child_properties:
x_file = options.module + '-scan' + config.exeext
- stdout = ""
- if not options.verbose:
- stdout = ">/dev/null"
-
logging.debug('Intermediate scanner files: %s, %s, %s', c_file, o_file, x_file)
- # Compiling scanner
- command = '%s %s %s -c -o %s %s' % (options.cc, stdout, options.cflags, o_file, c_file)
- res = subprocess.check_call(command, shell=True)
- if res > 0:
- logging.warning('Compilation of scanner failed: %d', res)
+ res = execute_command(options, 'Compiling',
+ shlex.split(options.cc) + shlex.split(options.cflags) +
+ ["-c", "-o", o_file, c_file])
+ if res:
return res
- # Linking scanner
- command = '%s %s %s %s -o %s' % (options.ld, stdout, o_file, options.ldflags, x_file)
- res = subprocess.check_call(command, shell=True)
- if res > 0:
- logging.warning('Linking of scanner failed: %d', res)
+ res = execute_command(options, 'Linking',
+ shlex.split(options.ld) + [o_file] +
+ shlex.split(options.ldflags) + ['-o', x_file])
+ if res:
return res
- # Running scanner
- command = '%s ./%s' % (options.run, x_file)
- res = subprocess.check_call(command, shell=True)
- if res > 0:
- logging.warning('Running scanner failed: %d', res)
+ res = execute_command(options, 'Running',
+ shlex.split(options.run) + ['./' + x_file])
+ if res:
return res
logging.debug('Scan complete')
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = help
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = manual
+am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu help/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu help/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
ps ps-am tags tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
-include $(top_srcdir)/git.mk
<revhistory>
<revision>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision>
<revnumber>1.26</revnumber>
<date>11 Aug 2017</date>
<authorinitials>ss</authorinitials>
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
]]></programlisting>
</example>
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = help/manual
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in ChangeLog
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu help/manual/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu help/manual/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
@HAVE_YELP_TOOLS_TRUE@@YELP_HELP_RULES@
-include $(top_srcdir)/git.mk
<revhistory>
<revision>
- <revnumber>1.25.1</revnumber>
- <date>21 March 2016</date>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
<authorinitials>ss</authorinitials>
- <revremark>development version</revremark>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision>
+ <revnumber>1.26</revnumber>
+ <date>11 Aug 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>port all tools from perl/bash to python</revremark>
</revision>
<revision>
<revnumber>1.25</revnumber>
are declared in header files; it won't produce output for static functions).
</para>
- <para>GTK-Doc-র মধ্যে অনেকগুলি perl স্ক্রিপ্ট উপস্থিত রয়েছে ও প্রতিটি স্ক্রিপ্ট দ্বারা সম্পর্ণ প্রক্রিয়ার একটি ভিন্ন ধাপের কর্ম সঞ্চালন করা হয়।</para>
+ <para>
+ GTK-Doc consists of a number of python scripts, each performing a different step
+ in the process.
+ </para>
<para>এই প্রক্রিয়ার মধ্যে ৫-টি প্রধান ধাপ উপস্থিত রয়েছে:</para>
<sect2 id="requirements">
<title>আবশ্যক মান</title>
- <para><guilabel>Perl v5</guilabel> - প্রধান স্ক্রিপ্টগুলি Perl-এ লেখা হয়েছে।</para>
+ <para>
+ <guilabel>python 2/3</guilabel> - the main scripts are written in python.
+ </para>
<para>
<guilabel>xsltproc</guilabel> - the xslt processor from libxslt
<ulink url="http://xmlsoft.org/XSLT/" type="http">xmlsoft.org/XSLT/</ulink>
<ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>
</para>
<para>
- <guilabel>Python</guilabel> - optional - for gtkdoc-depscan
- </para>
- <para>
One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> or
<guilabel>vim</guilabel> - optional - used for syntax highlighting of examples
</para>
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
]]></programlisting>
</example>
# Czech translation of gtk-doc.
# Copyright (C) 2009 gtk-doc's COPYRIGHT HOLDER
# This file is distributed under the same license as the gtk-doc package.
-# Marek Černocký <marek@manet.cz>, 2009, 2015, 2016.
+# Marek Černocký <marek@manet.cz>, 2009, 2015, 2016, 2017.
#
msgid ""
msgstr ""
"Project-Id-Version: gtk-doc master\n"
-"POT-Creation-Date: 2016-09-06 04:43+0000\n"
-"PO-Revision-Date: 2016-09-18 10:27+0200\n"
+"POT-Creation-Date: 2017-11-01 20:34+0000\n"
+"PO-Revision-Date: 2017-08-14 11:50+0200\n"
"Last-Translator: Marek Černocký <marek@manet.cz>\n"
"Language-Team: čeština <gnome-cs-list@gnome.org>\n"
"Language: cs\n"
#. (itstool) path: revhistory/revision
#: C/index.docbook:83
msgid ""
-"<revnumber>1.2
5.1</revnumber> <date>21 March 2016</date> <authorinitials>ss</"
-"authorinitials> <revremark>development version</revremark>"
+"<revnumber>1.2
6.1</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>development</revremark>"
msgstr ""
-"<revnumber>1.25.1</revnumber> <date>21. březen 2016</date> "
-"<authorinitials>ss</authorinitials> <revremark>development version</"
-"revremark>"
+"<revnumber>1.26.1</revnumber> <date>11. srpna 2017</date> "
+"<authorinitials>ss</authorinitials> <revremark>vývoj</revremark>"
#. (itstool) path: revhistory/revision
#: C/index.docbook:89
msgid ""
+"<revnumber>1.26</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>port all tools from perl/bash to python</"
+"revremark>"
+msgstr ""
+"<revnumber>1.26</revnumber> <date>11. srpen 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>přenesení všech nástrojů z jazyků Perl/Bash do "
+"jazyka Python</revremark>"
+
+#. (itstool) path: revhistory/revision
+#: C/index.docbook:95
+msgid ""
"<revnumber>1.25</revnumber> <date>21 March 2016</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, test cleanups</revremark>"
msgstr ""
"authorinitials> <revremark>opravy chyb, pročištění testů</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:95
+#: C/index.docbook:101
msgid ""
"<revnumber>1.24</revnumber> <date>29 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fix</revremark>"
"authorinitials> <revremark>oprava chyby</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:101
+#: C/index.docbook:107
msgid ""
"<revnumber>1.23</revnumber> <date>17 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fix</revremark>"
"authorinitials> <revremark>oprava chyby</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:107
+#: C/index.docbook:113
msgid ""
"<revnumber>1.22</revnumber> <date>07 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, dropping deprecated features</"
"revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:113
+#: C/index.docbook:119
msgid ""
"<revnumber>1.21</revnumber> <date>17 Jul 2014</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, dropping deprecated features</"
"zastaralých věcí</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:119
+#: C/index.docbook:125
msgid ""
"<revnumber>1.20</revnumber> <date>16 Feb 2014</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, markdown support, style improvements</"
"vylepšení stylů</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:125
+#: C/index.docbook:131
msgid ""
"<revnumber>1.19</revnumber> <date>05 Jun 2013</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes</revremark>"
"authorinitials> <revremark>opravy chyb</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:131
+#: C/index.docbook:137
msgid ""
"<revnumber>1.18</revnumber> <date>14 Sep 2011</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, speedups, markdown support</revremark>"
"jazyka</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:137
+#: C/index.docbook:143
msgid ""
"<revnumber>1.17</revnumber> <date>26 Feb 2011</date> <authorinitials>sk</"
"authorinitials> <revremark>urgent bug fix update</revremark>"
"revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:143
+#: C/index.docbook:149
msgid ""
"<revnumber>1.16</revnumber> <date>14 Jan 2011</date> <authorinitials>sk</"
"authorinitials> <revremark>bugfixes, layout improvements</revremark>"
"authorinitials> <revremark>opravy chyb, vylepšení vzhledu</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:149
+#: C/index.docbook:155
msgid ""
"<revnumber>1.15</revnumber> <date>21 May 2010</date> <authorinitials>sk</"
"authorinitials> <revremark>bug and regression fixes</revremark>"
"authorinitials> <revremark>opravy chyb a regresí</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:155
+#: C/index.docbook:161
msgid ""
"<revnumber>1.14</revnumber> <date>28 March 2010</date> <authorinitials>sk</"
"authorinitials> <revremark>bugfixes and performance improvements</revremark>"
"authorinitials> <revremark>opravy chyb a vylepšení výkonu</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:161
+#: C/index.docbook:167
msgid ""
"<revnumber>1.13</revnumber> <date>18 December 2009</date> "
"<authorinitials>sk</authorinitials> <revremark>broken tarball update</"
"balíčku</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:167
+#: C/index.docbook:173
msgid ""
"<revnumber>1.12</revnumber> <date>18 December 2009</date> "
"<authorinitials>sk</authorinitials> <revremark>new tool features and "
"chyb</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:173
+#: C/index.docbook:179
msgid ""
"<revnumber>1.11</revnumber> <date>16 November 2008</date> "
"<authorinitials>mal</authorinitials> <revremark>GNOME doc-utils migration</"
"GNOME</revremark>"
#. (itstool) path: chapter/title
-#: C/index.docbook:186
+#: C/index.docbook:192
msgid "Introduction"
msgstr "Úvod"
#. (itstool) path: chapter/para
-#: C/index.docbook:188
+#: C/index.docbook:194
msgid ""
"This chapter introduces GTK-Doc and gives an overview of what it is and how "
"it is used."
"použít."
#. (itstool) path: sect1/title
-#: C/index.docbook:194
+#: C/index.docbook:200
msgid "What is GTK-Doc?"
msgstr "Co je to GTK-Doc?"
#. (itstool) path: sect1/para
-#: C/index.docbook:196
+#: C/index.docbook:202
msgid ""
"GTK-Doc is used to document C code. It is typically used to document the "
"public API of libraries, such as the GTK+ and GNOME libraries. But it can "
"ale použít i k dokumentaci aplikačního kódu."
#. (itstool) path: sect1/title
-#: C/index.docbook:204
+#: C/index.docbook:210
msgid "How Does GTK-Doc Work?"
msgstr "Jak GTK-Doc pracuje?"
#. (itstool) path: sect1/para
-#: C/index.docbook:206
+#: C/index.docbook:212
msgid ""
"GTK-Doc works by using documentation of functions placed inside the source "
"files in specially-formatted comment blocks, or documentation added to the "
"nevytváří)."
#. (itstool) path: sect1/para
-#: C/index.docbook:213
+#: C/index.docbook:219
msgid ""
-"GTK-Doc consists of a number of perl scripts, each performing a different "
+"GTK-Doc consists of a number of python scripts, each performing a different "
"step in the process."
msgstr ""
-"GTK-Doc sestává z řady perlových skriptů, z nichž každý provádí jinou část "
-"procesu."
+"GTK-Doc sestává z řady skriptů v jazyce Python, z nichž každý provádí jinou "
+"část procesu."
#. (itstool) path: sect1/para
-#: C/index.docbook:218
+#: C/index.docbook:224
msgid "There are 5 main steps in the process:"
msgstr "Celý proces se skládá z pěti hlavních kroků:"
#. (itstool) path: listitem/para
-#: C/index.docbook:225
+#: C/index.docbook:231
msgid ""
"<guilabel>Writing the documentation.</guilabel> The author fills in the "
"source files with the documentation for each function, macro, union etc. (In "
"nedoporučuje)."
#. (itstool) path: listitem/para
-#: C/index.docbook:235
+#: C/index.docbook:241
msgid ""
"<guilabel>Gathering information about the code.</guilabel> "
"<application>gtkdoc-scan</application> scans the header files of the code "
"filename> do <filename><module>-overrides.txt</filename>."
#. (itstool) path: listitem/para
-#: C/index.docbook:252
+#: C/index.docbook:258
msgid ""
"<application>gtkdoc-scangobj</application> can also be used to dynamically "
"query a library about any GObject subclasses it exports. It saves "
"signálech objektu GObject, které poskytují."
#. (itstool) path: listitem/para
-#: C/index.docbook:258
+#: C/index.docbook:264
msgid ""
"<application>gtkdoc-scanobj</application> should not be used anymore. It was "
"needed in the past when GObject was still GtkObject inside gtk+."
"Bylo zapotřebí v minulosti, kdy byl GObject ještě GtkObject v rámci gtk+."
#. (itstool) path: listitem/para
-#: C/index.docbook:265
-msgid ""
-"<guilabel>Generating the \"template\" files.</guilabel> <application>gtkdoc-"
-"mktmpl</application> creates a number of files in the <filename class="
-"\"directory\">tmpl/</filename> subdirectory, using the information gathered "
-"in the first step. (Note that this can be run repeatedly. It will try to "
-"ensure that no documentation is ever lost.)"
-msgstr ""
-"<guilabel>Generování souborů „šablon“.</guilabel> <application>gtkdoc-"
-"mktmpl</application> vytvoří v podsložce <filename class=\"directory\">tmpl/"
-"</filename> řadu souborů, za použití informací shromážděných v prvním kroku. "
-"(Poznamenejme, že může být spouštěn opakovaně. Tím se zajistí, že se žádná "
-"dokumentace neztratí.)"
-
-#. (itstool) path: note/para
-#: C/index.docbook:274
-msgid ""
-"Since GTK-Doc 1.9 the templates can be avoided. We encourage people to keep "
-"documentation in the code. <application>gtkdocize</application> supports now "
-"a <option>--flavour no-tmpl</option> option that chooses a makefile that "
-"skips tmpl usage totally. If you have never changed file in tmpl by hand, "
-"please remove the directory (e.g. from version control system)."
-msgstr ""
-"Od verze gtk-doc 1.9 můžete šablony vynechat. Doporučujeme lidem, aby "
-"udržovali dokumentaci v kódu. <application>gtkdocize</application> nyní "
-"podporuje přepínač <option>--flavour no-tmpl</option>, který způsobí, že "
-"makefile úplně přeskočí použití tmpl. Pokud jste nikdy ručně neměnili "
-"soubory v tmpl, tak tuto složku prosím odstraňte."
-
-#. (itstool) path: listitem/para
-#: C/index.docbook:286
+#: C/index.docbook:271
msgid ""
"<guilabel>Generating the XML and HTML/PDF.</guilabel> <application>gtkdoc-"
"mkdb</application> turns the template files into XML files in the <filename "
"zdrojového kódu a introspektivních dat."
#. (itstool) path: listitem/para
-#: C/index.docbook:295
+#: C/index.docbook:280
msgid ""
"<application>gtkdoc-mkhtml</application> turns the XML files into HTML files "
"in the <filename class=\"directory\">html/</filename> subdirectory. Likewise "
"nazvaný <filename><balíček>.pdf</filename>."
#. (itstool) path: listitem/para
-#: C/index.docbook:301
+#: C/index.docbook:286
msgid ""
"Files in <filename class=\"directory\">xml/</filename> and <filename class="
"\"directory\">html/</filename> directories are always overwritten. One "
"neměly být upravovány přímo."
#. (itstool) path: listitem/para
-#: C/index.docbook:309
+#: C/index.docbook:294
msgid ""
"<guilabel>Fixing up cross-references between documents.</guilabel> After "
"installing the HTML files, <application>gtkdoc-fixxref</application> can be "
"dokumenty, které jsou nainstalované)."
#. (itstool) path: sect1/title
-#: C/index.docbook:327
+#: C/index.docbook:312
msgid "Getting GTK-Doc"
msgstr "Jak získat GTK-Doc?"
#. (itstool) path: sect2/title
-#: C/index.docbook:330
+#: C/index.docbook:315
msgid "Requirements"
msgstr "Požadavky"
#. (itstool) path: sect2/para
-#: C/index.docbook:331
-msgid "<guilabel>Perl v5</guilabel> - the main scripts are in Perl."
-msgstr "<guilabel>Perl v5</guilabel> – hlavní skripty jsou v jazyce Perl."
+#: C/index.docbook:316
+msgid ""
+"<guilabel>python 2/3</guilabel> - the main scripts are written in python."
+msgstr "<guilabel>Python 2/3</guilabel> – hlavní skripty jsou v jazyce Python."
#. (itstool) path: sect2/para
-#: C/index.docbook:334
+#: C/index.docbook:319
msgid ""
"<guilabel>xsltproc</guilabel> - the xslt processor from libxslt <ulink url="
"\"http://xmlsoft.org/XSLT/\" type=\"http\">xmlsoft.org/XSLT/</ulink>"
"\"http://xmlsoft.org/XSLT/\" type=\"http\">xmlsoft.org/XSLT/</ulink>"
#. (itstool) path: sect2/para
-#: C/index.docbook:338
+#: C/index.docbook:323
msgid ""
"<guilabel>docbook-xsl</guilabel> - the docbook xsl stylesheets <ulink url="
"\"http://sourceforge.net/projects/docbook/files/docbook-xsl/\" type=\"http"
"\">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>"
#. (itstool) path: sect2/para
-#: C/index.docbook:342
-msgid "<guilabel>Python</guilabel> - optional - for gtkdoc-depscan"
-msgstr "<guilabel>Python</guilabel> – pro gtkdoc-depscan (volitelné)"
-
-#. (itstool) path: sect2/para
-#: C/index.docbook:345
+#: C/index.docbook:327
msgid ""
"One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> "
"or <guilabel>vim</guilabel> - optional - used for syntax highlighting of "
"syntaxe u příkladů"
#. (itstool) path: sect1/title
-#: C/index.docbook:353
+#: C/index.docbook:335
msgid "About GTK-Doc"
msgstr "O aplikaci GTK-Doc"
#. (itstool) path: sect1/para
-#: C/index.docbook:355 C/index.docbook:369
+#: C/index.docbook:337 C/index.docbook:351
msgid "(FIXME)"
msgstr "(DOPLNIT)"
#. (itstool) path: sect1/para
-#: C/index.docbook:359
+#: C/index.docbook:341
msgid ""
"(History, authors, web pages, mailing list, license, future plans, "
"comparison with other similar systems.)"
"budoucna, srovnání s ostatními podobnými systémy.)"
#. (itstool) path: sect1/title
-#: C/index.docbook:367
+#: C/index.docbook:349
msgid "About this Manual"
msgstr "O této příručce"
#. (itstool) path: sect1/para
-#: C/index.docbook:373
+#: C/index.docbook:355
msgid "(who it is meant for, where you can get it, license)"
msgstr "(k čemu je určená, kde ji můžete získat, licence)"
#. (itstool) path: chapter/title
-#: C/index.docbook:382
+#: C/index.docbook:364
msgid "Setting up your project"
msgstr "Nastavení vašeho projektu"
#. (itstool) path: chapter/para
-#: C/index.docbook:384
+#: C/index.docbook:366
msgid ""
"The next sections describe what steps to perform to integrate GTK-Doc into "
"your project. Theses sections assume we work on a project called 'meep'. "
"popsány základní požadavky pro fungování s jinými postupy sestavování."
#. (itstool) path: sect1/title
-#: C/index.docbook:395
+#: C/index.docbook:377
msgid "Setting up a skeleton documentation"
msgstr "Nastavení kostry dokumentace"
#. (itstool) path: sect1/para
-#: C/index.docbook:397
+#: C/index.docbook:379
msgid ""
"Under your top-level project directory create folders called docs/reference "
"(this way you can also have docs/help for end-user documentation). It is "
"jedinou knihovnou není tento krok nutný."
#. (itstool) path: example/title
-#: C/index.docbook:406
+#: C/index.docbook:388
msgid "Example directory structure"
msgstr "Příklad struktury složek"
#. (itstool) path: example/programlisting
-#: C/index.docbook:407
+#: C/index.docbook:389
#, no-wrap
msgid ""
"\n"
" meeper/\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:404
+#: C/index.docbook:386
msgid "This can then look as shown below: <_:example-1/>"
msgstr "Ve výsledku to může vypadat nějak takto: <_:example-1/>"
#. (itstool) path: sect1/title
#. (itstool) path: example/title
-#: C/index.docbook:422 C/index.docbook:429
+#: C/index.docbook:404 C/index.docbook:411
msgid "Integration with autoconf"
msgstr "Integrace s autoconf"
#. (itstool) path: sect1/para
-#: C/index.docbook:424
+#: C/index.docbook:406
msgid ""
"Very easy! Just add one line to your <filename>configure.ac</filename> "
"script."
"<filename>configure.ac</filename>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:430
+#: C/index.docbook:412
#, no-wrap
msgid ""
"\n"
"GTK_DOC_CHECK([1.14],[--flavour no-tmpl])\n"
#. (itstool) path: example/title
-#: C/index.docbook:442
+#: C/index.docbook:424
msgid "Keep gtk-doc optional"
msgstr "Ponechání gtk-doc jako volitelného"
#. (itstool) path: example/programlisting
-#: C/index.docbook:443
+#: C/index.docbook:425
#, no-wrap
msgid ""
"\n"
"])\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:437
+#: C/index.docbook:419
msgid ""
"This will require all developers to have gtk-doc installed. If it is okay "
"for your project to have optional api-doc build setup, you can solve this as "
"example-1/>"
#. (itstool) path: sect1/para
-#: C/index.docbook:454
+#: C/index.docbook:436
msgid ""
"The first argument is used to check for the gtkdocversion at configure time. "
"The 2nd, optional argument is used by <application>gtkdocize</application>. "
"přepínačů pro configure:"
#. (itstool) path: listitem/para
-#: C/index.docbook:460
+#: C/index.docbook:442
msgid "--with-html-dir=PATH : path to installed docs"
msgstr "--with-html-dir=CESTA: cesta, kam se má dokumentace nainstalovat"
#. (itstool) path: listitem/para
-#: C/index.docbook:461
+#: C/index.docbook:443
msgid "--enable-gtk-doc : use gtk-doc to build documentation [default=no]"
msgstr ""
"--enable-gtk-doc: použít k sestavení dokumentace gtk-doc [výchozí je ne]"
#. (itstool) path: listitem/para
-#: C/index.docbook:462
+#: C/index.docbook:444
msgid ""
"--enable-gtk-doc-html : build documentation in html format [default=yes]"
msgstr ""
"--enable-gtk-doc-html: sestavit dokumentaci ve formátu HTML [výchozí je ano]"
#. (itstool) path: listitem/para
-#: C/index.docbook:463
+#: C/index.docbook:445
msgid "--enable-gtk-doc-pdf : build documentation in pdf format [default=no]"
msgstr ""
"--enable-gtk-doc-pdf: sestavit dokumentaci ve formátu PDF [výchozí je ne]"
#. (itstool) path: important/para
-#: C/index.docbook:467
+#: C/index.docbook:449
msgid ""
"GTK-Doc is disabled by default! Remember to pass the option <option>'--"
"enable-gtk-doc'</option> to the next <filename>configure</filename> run. "
"uživatele, ale ne pro vývojáře)."
#. (itstool) path: sect1/para
-#: C/index.docbook:475
+#: C/index.docbook:457
msgid ""
-"Furthermore it is recommended that you have the following line inside you "
+"Furthermore it is recommended that you have the following line inside your "
"<filename>configure.ac</filename> script. This allows "
"<application>gtkdocize</application> to automatically copy the macro "
"definition for <function>GTK_DOC_CHECK</function> to your project."
"function> do vašeho projektu."
#. (itstool) path: example/title
-#: C/index.docbook:483
+#: C/index.docbook:465
msgid "Preparation for gtkdocize"
msgstr "Příprava pro gtkdocize"
#. (itstool) path: example/programlisting
-#: C/index.docbook:484
+#: C/index.docbook:466
#, no-wrap
msgid ""
"\n"
"AC_CONFIG_MACRO_DIR(m4)\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:489
+#: C/index.docbook:471
msgid ""
"After all changes to <filename>configure.ac</filename> are made, update the "
"<filename>configure</filename> file. This can be done by re-running "
"<code>autoreconf -i</code> nebo <code>autogen.sh</code>."
#. (itstool) path: sect1/title
-#: C/index.docbook:497
+#: C/index.docbook:479
msgid "Integration with automake"
msgstr "Integrace s automake"
#. (itstool) path: sect1/para
-#: C/index.docbook:499
+#: C/index.docbook:481
msgid ""
"First copy the <filename>Makefile.am</filename> from the <filename class="
"\"directory\">examples</filename> sub directory of the <ulink url=\"https://"
"opakujte tento krok pro každý z nich."
#. (itstool) path: sect1/para
-#: C/index.docbook:510
+#: C/index.docbook:492
msgid ""
"The next step is to edit the settings inside the <filename>Makefile.am</"
"filename>. All the settings have a comment above that describes their "
"přepínačů."
#. (itstool) path: sect1/title
-#: C/index.docbook:524
+#: C/index.docbook:506
msgid "Integration with autogen"
msgstr "Integrace s autogen"
#. (itstool) path: sect1/para
-#: C/index.docbook:526
+#: C/index.docbook:508
msgid ""
"Most projects will have an <filename>autogen.sh</filename> script to setup "
"the build infrastructure after a checkout from version control system (such "
"Měl by být spuštěný před autoheader, automake nebo autoconf."
#. (itstool) path: example/title
-#: C/index.docbook:535
+#: C/index.docbook:517
msgid "Running gtkdocize from autogen.sh"
msgstr "Spuštění gtkdocize z autogen.sh"
#. (itstool) path: example/programlisting
-#: C/index.docbook:536
+#: C/index.docbook:518
#, no-wrap
msgid ""
"\n"
"gtkdocize || exit 1\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:542
+#: C/index.docbook:524
msgid ""
"When running <application>gtkdocize</application> it copies <filename>gtk-"
"doc.make</filename> to your project root (or any directory specified by the "
"application>."
#. (itstool) path: sect1/para
-#: C/index.docbook:551
+#: C/index.docbook:533
msgid ""
"Historically GTK-Doc was generating template files where developers entered "
"the docs. This turned out to be not so good (e.g. the need for having "
#. (itstool) path: sect1/title
#. (itstool) path: example/title
-#: C/index.docbook:568 C/index.docbook:585
+#: C/index.docbook:550 C/index.docbook:567
msgid "Running the doc build"
msgstr "Sestavení dokumentace"
#. (itstool) path: sect1/para
-#: C/index.docbook:570
+#: C/index.docbook:552
msgid ""
"After the previous steps it's time to run the build. First we need to rerun "
"<filename>autogen.sh</filename>. If this script runs configure for you, then "
"Jinak potom ručně spusťte <filename>configure</filename> s tímto přepínačem."
#. (itstool) path: sect1/para
-#: C/index.docbook:577
+#: C/index.docbook:559
msgid ""
"The first make run generates several additional files in the doc-"
"directories. The important ones are: <filename><package>.types</"
"package>-sections.txt</filename>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:586
+#: C/index.docbook:568
#, no-wrap
msgid ""
"\n"
"make\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:592
+#: C/index.docbook:574
msgid ""
"Now you can point your browser to <filename>docs/reference/<package>/"
"index.html</filename>. Yes, it's a bit disappointing still. But hang-on, "
"nebojte, v následující kapitole vám řekneme, jak stránky uvést do života."
#. (itstool) path: sect1/title
-#: C/index.docbook:600
+#: C/index.docbook:582
msgid "Integration with version control systems"
msgstr "Integrace se systémem pro správu verzí"
#. (itstool) path: sect1/para
-#: C/index.docbook:602
+#: C/index.docbook:584
msgid ""
"As a rule of thumb, it's the files you edit which should go under version "
"control. For typical projects it's these files: <filename><package>."
"<filename>Makefile.am</filename>."
#. (itstool) path: sect1/para
-#: C/index.docbook:610
+#: C/index.docbook:592
msgid ""
"Files in the <filename>xml/</filename> and <filename>html/</filename> "
"directories should not go under version control. Neither should any of the "
"filename>."
#. (itstool) path: sect1/title
-#: C/index.docbook:618
+#: C/index.docbook:600
msgid "Integration with plain makefiles or other build systems"
msgstr ""
"Integrace s prostými soubory Makefile nebo jinými sestavovacími systémy"
#. (itstool) path: sect1/para
-#: C/index.docbook:620
+#: C/index.docbook:602
msgid ""
"In the case one does not want to use automake and therefore <filename>gtk-"
"doc.mak</filename> one will need to call the gtkdoc tools in the right order "
"souborech make (nebo jiných nástrojích)."
#. (itstool) path: example/title
-#: C/index.docbook:627
+#: C/index.docbook:609
msgid "Documentation build steps"
msgstr "Kroky sestavení dokumentace"
#. (itstool) path: example/programlisting
-#: C/index.docbook:628
+#: C/index.docbook:610
#, no-wrap
msgid ""
"\n"
"gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:642
+#: C/index.docbook:624
msgid ""
"One will need to look at the <filename>Makefile.am</filename> and "
"<filename>gtk-doc.mak</filename> to pick the extra options needed."
"am</filename> a <filename>gtk-doc.mak</filename>."
#. (itstool) path: sect1/title
-#: C/index.docbook:649
+#: C/index.docbook:631
msgid "Integration with CMake build systems"
msgstr "Integrace se sestavovacím systémem CMake"
#. (itstool) path: sect1/para
-#: C/index.docbook:651
+#: C/index.docbook:633
msgid ""
"GTK-Doc now provides a <filename>GtkDocConfig.cmake</filename> module (and "
"the corresponding <filename>GtkDocConfigVersion.cmake</filename> module). "
"nastavit ve svém souboru <filename>CMakeLists.txt</filename>."
#. (itstool) path: example/title
-#: C/index.docbook:661
+#: C/index.docbook:643
msgid "Example of using GTK-Doc from CMake"
msgstr "Příklad použití GTK-Doc z CMake"
#. (itstool) path: example/programlisting
-#: C/index.docbook:662
+#: C/index.docbook:644
#, no-wrap
msgid ""
"\n"
" DESTINATION ${CMAKE_INSTALL_DOCDIR})\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:659
+#: C/index.docbook:641
msgid "The following example shows how to use this command. <_:example-1/>"
msgstr "Následující příklad ukazuje, jak tento příkaz použít: <_:example-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:687
+#: C/index.docbook:669
msgid "Documenting the code"
msgstr "Dokumentování v kódu"
#. (itstool) path: chapter/para
-#: C/index.docbook:689
+#: C/index.docbook:671
msgid ""
"GTK-Doc uses source code comment with a special syntax for code "
"documentation. Further it retrieves information about your project structure "
"syntaxi komentářů."
#. (itstool) path: note/title
-#: C/index.docbook:697
+#: C/index.docbook:679
msgid "Documentation placement"
msgstr "Umístění dokumentace"
#. (itstool) path: note/para
-#: C/index.docbook:698
+#: C/index.docbook:680
msgid ""
"In the past most documentation had to be filled into files residing inside "
"the <filename>tmpl</filename> directory. This has the disadvantages that the "
"systémech pro správu verzí."
#. (itstool) path: note/para
-#: C/index.docbook:704
+#: C/index.docbook:686
msgid ""
"The avoid the aforementioned problems we suggest putting the documentation "
"inside the sources. This manual will only describe this way of documenting "
"tento způsob dokumentování kódu."
#. (itstool) path: example/title
-#: C/index.docbook:715 C/index.docbook:741
+#: C/index.docbook:697 C/index.docbook:723
msgid "GTK-Doc comment block"
msgstr "Komentářový blok GTK-Doc"
#. (itstool) path: example/programlisting
-#: C/index.docbook:716
+#: C/index.docbook:698
#, no-wrap
msgid ""
"\n"
"#endif\n"
#. (itstool) path: chapter/para
-#: C/index.docbook:711
+#: C/index.docbook:693
msgid ""
"The scanner can handle the majority of C headers fine. In the case of "
"receiving warnings from the scanner that look like a special case, one can "
"poradit, aby jej přeskakovala. <_:example-1/>"
#. (itstool) path: note/title
-#: C/index.docbook:725
+#: C/index.docbook:707
msgid "Limitations"
msgstr "Omezení"
#. (itstool) path: note/para
-#: C/index.docbook:726
+#: C/index.docbook:708
msgid ""
"Note, that GTK-Doc's supports <code>#ifndef(__GTK_DOC_IGNORE__)</code> but "
"not <code>#if !defined(__GTK_DOC_IGNORE__)</code> or other combinations."
"ale ne <code>#if !defined(__GTK_DOC_IGNORE__)</code> nebo jiné kombinace."
#. (itstool) path: sect1/title
-#: C/index.docbook:736
+#: C/index.docbook:718
msgid "Documentation comments"
msgstr "Dokumentační komentáře"
#. (itstool) path: example/programlisting
-#: C/index.docbook:742
+#: C/index.docbook:724
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:738
+#: C/index.docbook:720
msgid ""
"A multiline comment that starts with an additional '*' marks a documentation "
"block that will be processed by the GTK-Doc tools. <_:example-1/>"
"dokumentačním blokem a bude zpracovaný nástroji GTK-Doc. <_:example-1/>"
#. (itstool) path: sect1/para
-#: C/index.docbook:751
+#: C/index.docbook:733
msgid ""
"The 'identifier' is one line with the name of the item the comment is "
"related to. The syntax differs a little depending on the item. (TODO add "
"se seznamem identifikátorů)"
#. (itstool) path: sect1/para
-#: C/index.docbook:757
+#: C/index.docbook:739
msgid ""
"The 'documentation' block is also different for each symbol type. Symbol "
"types that get parameters such as functions or macros have the parameter "
"hvězdička mezera mezera). To se hodí na text s pevným formátem (výpis kódu)."
#. (itstool) path: listitem/para
-#: C/index.docbook:774
+#: C/index.docbook:756
msgid ""
"What it is: The name for a class or function can sometimes be misleading for "
"people coming from a different background."
"používají něco jiného."
#. (itstool) path: listitem/para
-#: C/index.docbook:780
+#: C/index.docbook:762
msgid ""
"What it does: Tell about common uses. Put it in relation with the other API."
msgstr ""
"K čemu to je: Uveďte běžném použití. Dejte ho do souvislosti se zbytkem API."
#. (itstool) path: tip/para
-#: C/index.docbook:770
+#: C/index.docbook:752
msgid "When documenting code, describe two aspects: <_:itemizedlist-1/>"
msgstr ""
"Když píšete dokumentaci ke kódu, popište dva aspekty: <_:itemizedlist-1/>"
#. (itstool) path: listitem/para
-#: C/index.docbook:795
+#: C/index.docbook:777
msgid "Use function() to refer to functions or macros which take arguments."
msgstr ""
"Použijte funkce() pro odkaz na funkci nebo makro, které mají argumenty."
#. (itstool) path: listitem/para
-#: C/index.docbook:800
+#: C/index.docbook:782
msgid ""
"Use @param to refer to parameters. Also use this when referring to "
"parameters of other functions, related to the one being described."
"odkazujete na parametry jiných funkcí, vztahujících se k popisované funkci."
#. (itstool) path: listitem/para
-#: C/index.docbook:806
+#: C/index.docbook:788
msgid "Use %constant to refer to a constant, e.g. %G_TRAVERSE_LEAFS."
msgstr "Použijte %konstanta pro odkaz na konstantu, např. %G_TRAVERSE_LEAFS."
#. (itstool) path: listitem/para
-#: C/index.docbook:811
+#: C/index.docbook:793
msgid ""
"Use #symbol to refer to other types of symbol, e.g. structs and enums and "
"macros which don't take arguments."
"makro, který nemá argumenty."
#. (itstool) path: listitem/para
-#: C/index.docbook:817
+#: C/index.docbook:799
msgid "Use #Object::signal to refer to a GObject signal."
msgstr "Použijte #Objekt::signál pro odkaz na signál objektu GObject."
#. (itstool) path: listitem/para
-#: C/index.docbook:822
+#: C/index.docbook:804
msgid "Use #Object:property to refer to a GObject property."
msgstr "Použijte #Objekt:vlastnost pro odkaz na vlastnost objektu GObject."
#. (itstool) path: listitem/para
-#: C/index.docbook:827
+#: C/index.docbook:809
msgid ""
"Use #Struct.field to refer to a field inside a structure and #GObjectClass."
"foo_bar() to refer to a vmethod."
"neco() pro odkaz na virtuální metodu."
#. (itstool) path: sect1/para
-#: C/index.docbook:789
+#: C/index.docbook:771
msgid ""
"One advantage of hyper-text over plain-text is the ability to have links in "
"the document. Writing the correct markup for a link can be tedious though. "
"vám snaží pomoci několika užitečnými zkratkami. <_:itemizedlist-1/>"
#. (itstool) path: tip/para
-#: C/index.docbook:836
+#: C/index.docbook:818
msgid ""
"If you need to use the special characters '<', '>', '()', '@', '%', or "
"'#' in your documentation without GTK-Doc changing them you can use the XML "
"se zpětným lomítkem „\\“."
#. (itstool) path: sect1/para
-#: C/index.docbook:845
+#: C/index.docbook:827
msgid ""
"DocBook can do more than just links. One can also have lists, examples, "
"headings, and images. As of version 1.20, the preferred way is to use a "
"začátku."
#. (itstool) path: sect1/para
-#: C/index.docbook:856
+#: C/index.docbook:838
msgid ""
"While markdown is now preferred one can mix both. One limitation here is "
"that one can use docbook xml within markdown, but markdown within docbook "
"markdown v docbook xml podporován není."
#. (itstool) path: sect1/para
-#: C/index.docbook:862
+#: C/index.docbook:844
msgid ""
"In older GTK-Doc releases, if you need support for additional formatting, "
"you would need to enable the usage of docbook XML tags inside doc-comments "
"<filename>Makefile.am</filename>."
#. (itstool) path: example/title
-#: C/index.docbook:871
+#: C/index.docbook:853
msgid "GTK-Doc comment block using Markdown"
msgstr "Komentářový blok GTK-Doc používající značkovací jazyk"
#. (itstool) path: example/programlisting
-#: C/index.docbook:872
+#: C/index.docbook:854
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:911
+#: C/index.docbook:893
msgid ""
"More examples of what markdown tags are supported can be found in the <ulink "
"url=\"https://wiki.gnome.org/Projects/GTK%2B/DocumentationSyntax/Markdown"
"\">Referenční příručce k syntaxi Markdown pro dokumentaci GTK+</ulink>."
#. (itstool) path: tip/para
-#: C/index.docbook:917
+#: C/index.docbook:899
msgid ""
"As already mentioned earlier GTK-Doc is for documenting public API. Thus one "
"cannot write documentation for static symbols. Nevertheless it is good to "
"správné místo v souboru oddílů vložit název symbolu."
#. (itstool) path: sect1/title
-#: C/index.docbook:931
+#: C/index.docbook:913
msgid "Documenting sections"
msgstr "Dokumentování oddílů"
#. (itstool) path: sect1/para
-#: C/index.docbook:933
+#: C/index.docbook:915
msgid ""
"Each section of the documentation contains information about one class or "
"module. To introduce the component one can write a section block. The short "
"použije v rámci tabulky s obsahem. Všechna @pole jsou volitelná."
#. (itstool) path: example/title
-#: C/index.docbook:941
+#: C/index.docbook:923
msgid "Section comment block"
msgstr "Komentářový blok oddílu"
#. (itstool) path: example/programlisting
-#: C/index.docbook:942
+#: C/index.docbook:924
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:961
+#: C/index.docbook:943
msgid "SECTION:<name>"
msgstr "SECTION:<název>"
#. (itstool) path: listitem/para
-#: C/index.docbook:963
+#: C/index.docbook:945
msgid ""
"The name links the section documentation to the respective part in the "
-"<filename><package>-sections.txt</filename> file. The name give here "
+"<filename><package>-sections.txt</filename> file. The name given here "
"should match the <FILE> tag in the <filename><package>-sections."
"txt</filename> file."
msgstr ""
"Název prováže oddíl dokumentace s příslušnou částí v souboru <filename><"
-"package>-sections.txt</filename>. Název zde musí odpovídat značce <"
-"SOUBOR> v souboru <filename><package>-sections.txt</filename>."
+"package>-sections.txt</filename>. Zde zadaný název musí odpovídat značce "
+"<SOUBOR> v souboru <filename><package>-sections.txt</filename>."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:972
+#: C/index.docbook:954
msgid "@short_description"
msgstr "@short_description"
#. (itstool) path: listitem/para
-#: C/index.docbook:974
+#: C/index.docbook:956
msgid ""
"A one line description of the section, that later will appear after the "
"links in the TOC and at the top of the section page."
"obsahem a na začátku stránky oddílu."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:981
+#: C/index.docbook:963
msgid "@title"
msgstr "@title"
#. (itstool) path: listitem/para
-#: C/index.docbook:983
+#: C/index.docbook:965
msgid ""
"The section title defaults to <name> from the SECTION declaration. It "
"can be overridden with the @title field."
"jej ale určit i přímo v poli @title."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:990
+#: C/index.docbook:972
msgid "@section_id"
msgstr "@section_id"
#. (itstool) path: listitem/para
-#: C/index.docbook:992
+#: C/index.docbook:974
msgid ""
"Overrides the use of title as a section identifier. For GObjects the <"
"title> is used as a section_id and for other sections it is <"
"MODULE>-<title>."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1000
+#: C/index.docbook:982
msgid "@see_also"
msgstr "@see_also"
#. (itstool) path: listitem/para
-#: C/index.docbook:1002
+#: C/index.docbook:984
msgid "A list of symbols that are related to this section."
msgstr "Seznam symbolů, které se vztahují k tomuto oddílu."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1008
+#: C/index.docbook:990
msgid "@stability"
msgstr "@stability"
#. (itstool) path: listitem/para
-#: C/index.docbook:1015
+#: C/index.docbook:997
msgid ""
"Stable - The intention of a Stable interface is to enable arbitrary third "
"parties to develop applications to these interfaces, release them, and have "
"nekompatibilní změny očekávají zřídka v opravdu odůvodněných případech."
#. (itstool) path: listitem/para
-#: C/index.docbook:1027
+#: C/index.docbook:1009
msgid ""
"Unstable - Unstable interfaces are experimental or transitional. They are "
"typically used to give outside developers early access to new or rapidly "
"následujíc."
#. (itstool) path: listitem/para
-#: C/index.docbook:1039
+#: C/index.docbook:1021
msgid ""
"Private - An interface that can be used within the GNOME stack itself, but "
"that is not documented for end-users. Such functions should only be used in "
"měly používat jen určeným a dokumentovaným způsobem."
#. (itstool) path: listitem/para
-#: C/index.docbook:1048
+#: C/index.docbook:1030
msgid ""
"Internal - An interface that is internal to a module and does not require "
"end-user documentation. Functions that are undocumented are assumed to be "
"nedokumentované, jsou považované za interní."
#. (itstool) path: listitem/para
-#: C/index.docbook:1010
+#: C/index.docbook:992
msgid ""
"An informal description of the stability level this API has. We recommend "
"the use of one of these terms: <_:itemizedlist-1/>"
"těchto termínů: <_:itemizedlist-1/>"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1060
+#: C/index.docbook:1042
msgid "@include"
msgstr "@include"
#. (itstool) path: listitem/para
-#: C/index.docbook:1062
+#: C/index.docbook:1044
msgid ""
"The <literal>#include</literal> files to show in the section synopsis (a "
"comma separated list), overriding the global value from the <link linkend="
"položka je volitelná."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1071
+#: C/index.docbook:1053
msgid "@image"
msgstr "@image"
#. (itstool) path: listitem/para
-#: C/index.docbook:1073
+#: C/index.docbook:1055
msgid ""
"The image to display at the top of the reference page for this section. This "
"will often be some sort of a diagram to illustrate the visual appearance of "
"nebo nákres se vztahy vůči jiným třídám. Tato položka je volitelná."
#. (itstool) path: tip/para
-#: C/index.docbook:1084
+#: C/index.docbook:1066
msgid ""
"To avoid unnecessary recompilation after doc-changes put the section docs "
"into the c-source where possible."
"vložte, kde je to možné, dokumentaci oddílu do zdrojového kódu c."
#. (itstool) path: sect1/title
-#: C/index.docbook:1093
+#: C/index.docbook:1075
msgid "Documenting symbols"
msgstr "Dokumentování symbolů"
#. (itstool) path: sect1/para
-#: C/index.docbook:1095
+#: C/index.docbook:1077
msgid ""
"Each symbol (function, macro, struct, enum, signal and property) is "
"documented in a separate block. The block is best placed close to the "
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1103 C/index.docbook:1169
+#: C/index.docbook:1085 C/index.docbook:1151
msgid "General tags"
msgstr "Obecné značky"
#. (itstool) path: sect2/para
-#: C/index.docbook:1105
+#: C/index.docbook:1087
msgid ""
"You can add versioning information to all documentation elements to tell "
"when an API was introduced, or when it was deprecated."
"sdělili, kdy bylo API zavedeno, nebo kdy bylo označeno za zastaralé."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1110
+#: C/index.docbook:1092
msgid "Versioning Tags"
msgstr "Značky pro verzování"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1111
+#: C/index.docbook:1093
msgid "Since:"
msgstr "Since:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1113
+#: C/index.docbook:1095
msgid "Description since which version of the code the API is available."
msgstr "Popisuje, od které verze kódu je API dostupné."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1118
+#: C/index.docbook:1100
msgid "Deprecated:"
msgstr "Deprecated:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1120
+#: C/index.docbook:1102
msgid ""
"Paragraph denoting that this function should no be used anymore. The "
"description should point the reader to the new API."
"měl čtenáře odkazovat na nové API."
#. (itstool) path: sect2/para
-#: C/index.docbook:1128
+#: C/index.docbook:1110
msgid ""
"You can also add stability information to all documentation elements to "
"indicate whether API stability is guaranteed for them for all future minor "
"minoritní vydání projektu."
#. (itstool) path: sect2/para
-#: C/index.docbook:1134
+#: C/index.docbook:1116
msgid ""
"The default stability level for all documentation elements can be set by "
"passing the <option>--default-stability</option> argument to "
"do <application>gtkdoc-mkdb</application>."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1140
+#: C/index.docbook:1122
msgid "Stability Tags"
msgstr "Značky pro stabilitu"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1141
+#: C/index.docbook:1123
msgid "Stability: Stable"
msgstr "Stability: Stable"
#. (itstool) path: listitem/para
-#: C/index.docbook:1143
+#: C/index.docbook:1125
msgid ""
"Mark the element as stable. This is for public APIs which are guaranteed to "
"remain stable for all future minor releases of the project."
"že zůstanou stabilní po všechna minoritní vydání projektu."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1150
+#: C/index.docbook:1132
msgid "Stability: Unstable"
msgstr "Stability: Unstable"
#. (itstool) path: listitem/para
-#: C/index.docbook:1152
+#: C/index.docbook:1134
msgid ""
"Mark the element as unstable. This is for public APIs which are released as "
"a preview before being stabilised."
"vydána jako ukázky před tím, než jsou stabilizována."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1158
+#: C/index.docbook:1140
msgid "Stability: Private"
msgstr "Stability: Private"
#. (itstool) path: listitem/para
-#: C/index.docbook:1160
+#: C/index.docbook:1142
msgid ""
"Mark the element as private. This is for interfaces which can be used by "
"tightly coupled modules, but not by arbitrary third parties."
"použita přímo v modulu, ale ne kterýmikoliv třetími stranami."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1170
+#: C/index.docbook:1152
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1190 C/index.docbook:1200
+#: C/index.docbook:1172 C/index.docbook:1182
msgid "Annotations"
msgstr "Anotace"
#. (itstool) path: sect2/para
-#: C/index.docbook:1192
+#: C/index.docbook:1174
msgid ""
"Documentation blocks can contain annotation-tags. These tags will be "
"rendered with tooltips describing their meaning. The tags are used by "
"org/GObjectIntrospection/Annotations\" type=\"http\">wiki</ulink>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1201
+#: C/index.docbook:1183
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1222 C/index.docbook:1251
+#: C/index.docbook:1204 C/index.docbook:1233
msgid "Function comment block"
msgstr "Komentářový blok pro funkci"
#. (itstool) path: listitem/para
-#: C/index.docbook:1228
+#: C/index.docbook:1210
msgid ""
"Document whether returned objects, lists, strings, etc, should be freed/"
"unrefed/released."
"uvolnit z paměti."
#. (itstool) path: listitem/para
-#: C/index.docbook:1234
+#: C/index.docbook:1216
msgid "Document whether parameters can be NULL, and what happens if they are."
msgstr ""
"Zdokumentovat, jestli může parametr být NULL a co se stane, když tomu tak je."
#. (itstool) path: listitem/para
-#: C/index.docbook:1239
+#: C/index.docbook:1221
msgid ""
"Mention interesting pre-conditions and post-conditions where appropriate."
msgstr "Kde je to vhodné, zmínit úvodní a koncové podmínky."
#. (itstool) path: sect2/para
-#: C/index.docbook:1224 C/index.docbook:1310
+#: C/index.docbook:1206 C/index.docbook:1292
msgid "Please remember to: <_:itemizedlist-1/>"
msgstr "Nezapomeňte prosím: <_:itemizedlist-1/>"
#. (itstool) path: sect2/para
-#: C/index.docbook:1246
+#: C/index.docbook:1228
msgid ""
"Gtk-doc assumes all symbols (macros, functions) starting with '_' are "
"private. They are treated like static functions."
"„_“, jsou soukromé. Potom se s nimi zachází jako se statickými funkcemi."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1252
+#: C/index.docbook:1234
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: variablelist/title
-#: C/index.docbook:1273
+#: C/index.docbook:1255
msgid "Function tags"
msgstr "Značky pro funkce"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1274 C/index.docbook:1481
+#: C/index.docbook:1256 C/index.docbook:1463
msgid "Returns:"
msgstr "Returns:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1276
+#: C/index.docbook:1258
msgid "Paragraph describing the returned result."
msgstr "Odstavec popisující vracený výsledek."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1281
+#: C/index.docbook:1263
msgid "@...:"
msgstr "@…:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1283
+#: C/index.docbook:1265
msgid ""
"In case the function has variadic arguments, you should use this tag "
"(@Varargs: does also work for historic reasons)."
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1293 C/index.docbook:1295
+#: C/index.docbook:1275 C/index.docbook:1277
msgid "Property comment block"
msgstr "Komentářový blok pro vlastnost"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1296
+#: C/index.docbook:1278
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1308 C/index.docbook:1327
+#: C/index.docbook:1290 C/index.docbook:1309
msgid "Signal comment block"
msgstr "Komentářový blok pro signál"
#. (itstool) path: listitem/para
-#: C/index.docbook:1314
+#: C/index.docbook:1296
msgid ""
"Document when the signal is emitted and whether it is emitted before or "
"after other signals."
"ostatních signálech."
#. (itstool) path: listitem/para
-#: C/index.docbook:1320
+#: C/index.docbook:1302
msgid "Document what an application might do in the signal handler."
msgstr "Zdokumentovat, co aplikace smí v obsluze signálu provádět."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1328
+#: C/index.docbook:1310
#, no-wrap
msgid ""
"\n"
" *\n"
" * The ::foobarized signal is emitted each time someone tries to foobarize @widget.\n"
" */\n"
-"foo_signals[FOOBARIZE] =\n"
-" g_signal_new (\"foobarize\",\n"
+"foo_signals[FOOBARIZED] =\n"
+" g_signal_new (\"foobarized\",\n"
" ...\n"
msgstr ""
"\n"
" *\n"
" * Signál ::foobarized je vyslán pokaždé, když někdo zkusí něco s @widget.\n"
" */\n"
-"foo_signals[FOOBARIZE] =\n"
-" g_signal_new (\"foobarize\",\n"
+"foo_signals[FOOBARIZED] =\n"
+" g_signal_new (\"foobarized\",\n"
" ...\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1345 C/index.docbook:1346
+#: C/index.docbook:1327 C/index.docbook:1328
msgid "Struct comment block"
msgstr "Komentářový blok pro strukturu"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1347
+#: C/index.docbook:1329
#, no-wrap
msgid ""
"\n"
"} FooWidget;\n"
#. (itstool) path: sect2/para
-#: C/index.docbook:1362
+#: C/index.docbook:1344
msgid ""
"Use <code>/*< private >*/</code> before the private struct fields you "
"want to hide. Use <code>/*< public >*/</code> for the reverse "
"*/</code>."
#. (itstool) path: sect2/para
-#: C/index.docbook:1368
+#: C/index.docbook:1350
msgid ""
"If the first field is \"g_iface\", \"parent_instance\" or \"parent_class\" "
"it will be considered private automatically and doesn't need to be mentioned "
"komentářovém bloku."
#. (itstool) path: sect2/para
-#: C/index.docbook:1374
+#: C/index.docbook:1356
msgid ""
"Struct comment blocks can also be used for GObjects and GObjectClasses. It "
"is usually a good idea to add a comment block for a class, if it has "
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1386 C/index.docbook:1387
+#: C/index.docbook:1368 C/index.docbook:1369
msgid "Enum comment block"
msgstr "Komentářový blok pro výčty"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1388
+#: C/index.docbook:1370
#, no-wrap
msgid ""
"\n"
"} Something;\n"
#. (itstool) path: sect2/para
-#: C/index.docbook:1405
+#: C/index.docbook:1387
msgid ""
"Use <code>/*< private >*/</code> before the private enum values you "
"want to hide. Use <code>/*< public >*/</code> for the reverse "
"public >*/</code>."
#. (itstool) path: sect1/title
-#: C/index.docbook:1416
+#: C/index.docbook:1398
msgid "Inline program documentation"
msgstr "Dokumentaci k vloženým programům"
#. (itstool) path: sect1/para
-#: C/index.docbook:1417
+#: C/index.docbook:1399
msgid ""
"You can document programs and their commandline interface using inline "
"documentation."
"vložené dokumentace."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1423
+#: C/index.docbook:1405
msgid "Tags"
msgstr "Značky"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1425
+#: C/index.docbook:1407
msgid "PROGRAM"
msgstr "PROGRAM"
#. (itstool) path: listitem/para
-#: C/index.docbook:1428
+#: C/index.docbook:1410
msgid "Defines the start of a program documentation."
msgstr "Definuje začátek dokumentace k programu."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1435
+#: C/index.docbook:1417
msgid "@short_description:"
msgstr "@short_description:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1437
+#: C/index.docbook:1419
msgid "Defines a short description of the program. (Optional)"
msgstr "Definuje krátký popis programu. (volitelné)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1444
+#: C/index.docbook:1426
msgid "@synopsis:"
msgstr "@synopsis:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1446
+#: C/index.docbook:1428
msgid ""
"Defines the arguments, or list of arguments that the program can take. "
"(Optional)"
"Definuje argumenty nebo seznam argumentů, které program přebírá. (volitelné)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1454
+#: C/index.docbook:1436
msgid "@see_also:"
msgstr "@see_also:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1456
+#: C/index.docbook:1438
msgid "See Also manual page section. (Optional)"
msgstr "Část stránky oddílu „Viz také“. (volitelné)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1463
+#: C/index.docbook:1445
msgid "@arg:"
msgstr "@arg:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1465
+#: C/index.docbook:1447
msgid "Argument(s) passed to the program and their description. (Optional)"
msgstr "Argument(y) předávané do programu a jejich popis. (volitelné)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1472
+#: C/index.docbook:1454
msgid "Description:"
msgstr "Description:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1474
+#: C/index.docbook:1456
msgid "A longer description of the program."
msgstr "Úplný popis programu."
#. (itstool) path: listitem/para
-#: C/index.docbook:1483
+#: C/index.docbook:1465
msgid "Specificy what value(s) the program returns. (Optional)"
msgstr "Specifikuje, jakou hodnotu či více hodnot program vrací. (volitelné)"
#. (itstool) path: sect2/title
-#: C/index.docbook:1492
+#: C/index.docbook:1474
msgid "Example of program documentation."
msgstr "Příklad dokumentace k programu."
#. (itstool) path: example/title
-#: C/index.docbook:1493
+#: C/index.docbook:1475
msgid "Program documentation block"
msgstr "Komentářový blok pro program"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1494
+#: C/index.docbook:1476
#, no-wrap
msgid ""
"\n"
"}\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:1520
+#: C/index.docbook:1502
msgid "Useful DocBook tags"
msgstr "Užitečné značky DocBook"
#. (itstool) path: sect1/para
-#: C/index.docbook:1522
+#: C/index.docbook:1504
msgid ""
"Here are some DocBook tags which are most useful when documenting the code."
msgstr ""
"význam."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1531
+#: C/index.docbook:1513
#, no-wrap
msgid ""
"\n"
"<link linkend=\"glib-Hash-Tables\">Hašovací tabulky</link>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1527
+#: C/index.docbook:1509
msgid ""
"To link to another section in the GTK docs: <_:informalexample-1/> The "
"linkend is the SGML/XML id on the top item of the page you want to link to. "
"podtržítka se převedou na „-“, aby to vyhovovalo SGML/XML."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1544
+#: C/index.docbook:1526
#, no-wrap
msgid ""
"\n"
"<function>…</function>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1541
+#: C/index.docbook:1523
msgid ""
"To refer to an external function, e.g. a standard C function: <_:"
"informalexample-1/>"
">"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1553
+#: C/index.docbook:1535
#, no-wrap
msgid ""
"\n"
"</example>\n"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1564
+#: C/index.docbook:1546
#, no-wrap
msgid ""
"\n"
"</informalexample>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1550
+#: C/index.docbook:1532
msgid ""
"To include example code: <_:informalexample-1/> or possibly this, for very "
"short code fragments which don't need a title: <_:informalexample-2/> For "
"V novějších verzích GTK-Doc je také podporované zkracování: |[ … ]|"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1583
+#: C/index.docbook:1565
#, no-wrap
msgid ""
"\n"
"</itemizedlist>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1580
+#: C/index.docbook:1562
msgid "To include bulleted lists: <_:informalexample-1/>"
msgstr "Vložení seznamu s odrážkami: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1603
+#: C/index.docbook:1585
#, no-wrap
msgid ""
"\n"
"</note>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1600
+#: C/index.docbook:1582
msgid ""
"To include a note which stands out from the text: <_:informalexample-1/>"
msgstr "Vložení poznámky, která se objeví mimo text: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1616
+#: C/index.docbook:1598
#, no-wrap
msgid ""
"\n"
"<type>unsigned char</type>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1613
+#: C/index.docbook:1595
msgid "To refer to a type: <_:informalexample-1/>"
msgstr "Odkaz na typ: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1625
+#: C/index.docbook:1607
#, no-wrap
msgid ""
"\n"
"<structname>XFontStruct</structname>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1622
+#: C/index.docbook:1604
msgid ""
"To refer to an external structure (not one described in the GTK docs): <_:"
"informalexample-1/>"
"informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1634
+#: C/index.docbook:1616
#, no-wrap
msgid ""
"\n"
"<structfield>len</structfield>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1631
+#: C/index.docbook:1613
msgid "To refer to a field of a structure: <_:informalexample-1/>"
msgstr "Odkaz na pole struktury: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1643
+#: C/index.docbook:1625
#, no-wrap
msgid ""
"\n"
"<classname>GtkWidget</classname>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1640
+#: C/index.docbook:1622
msgid ""
"To refer to a class name, we could possibly use: <_:informalexample-1/> but "
"you'll probably be using #GtkWidget instead (to automatically create a link "
"\"documenting_syntax\">zkratky</link>)."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1654
+#: C/index.docbook:1636
#, no-wrap
msgid ""
"\n"
"<emphasis>Toto je důležité</emphasis>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1651
+#: C/index.docbook:1633
msgid "To emphasize text: <_:informalexample-1/>"
msgstr "Zvýrazněný text: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1663
+#: C/index.docbook:1645
#, no-wrap
msgid ""
"\n"
"<filename>/home/user/documents</filename>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1660
+#: C/index.docbook:1642
msgid "For filenames use: <_:informalexample-1/>"
msgstr "Pro název souboru použijte: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1672
+#: C/index.docbook:1654
#, no-wrap
msgid ""
"\n"
"<keycombo><keycap>Ctrl</keycap><keycap>L</keycap></keycombo>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1669
+#: C/index.docbook:1651
msgid "To refer to keys use: <_:informalexample-1/>"
msgstr "Odkaz na použití klávesy: <_:informalexample-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:1682
+#: C/index.docbook:1664
msgid "Filling the extra files"
msgstr "Vyplňování dodatečných souborů"
#. (itstool) path: chapter/para
-#: C/index.docbook:1684
+#: C/index.docbook:1666
msgid ""
"There are a couple of extra files, that need to be maintained along with the "
"inline source code comments: <filename><package>.types</filename>, "
"<filename><balíček>-sections.txt</filename>."
#. (itstool) path: sect1/title
-#: C/index.docbook:1693
+#: C/index.docbook:1675
msgid "Editing the types file"
msgstr "Úprava souboru s typy"
#. (itstool) path: sect1/para
-#: C/index.docbook:1695
+#: C/index.docbook:1677
msgid ""
"If your library or application includes GObjects, you want their signals, "
"arguments/parameters and position in the hierarchy to be shown in the "
"filename>."
#. (itstool) path: example/title
-#: C/index.docbook:1704
+#: C/index.docbook:1686
msgid "Example types file snippet"
msgstr "Příklad úryvku ze souboru typů"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1705
+#: C/index.docbook:1687
#, no-wrap
msgid ""
"\n"
"gtk_arrow_get_type\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1716
+#: C/index.docbook:1698
msgid ""
"Since GTK-Doc 1.8 <application>gtkdoc-scan</application> can generate this "
"list for you. Just add \"--rebuild-types\" to SCAN_OPTIONS in "
"byste soubor s typy šířit do správy verzí."
#. (itstool) path: sect1/title
-#: C/index.docbook:1725
+#: C/index.docbook:1707
msgid "Editing the master document"
msgstr "Úprava hlavního dokumentu"
#. (itstool) path: sect1/para
-#: C/index.docbook:1727
+#: C/index.docbook:1709
msgid ""
"GTK-Doc produces documentation in DocBook SGML/XML. When processing the "
"inline source comments, the GTK-Doc tools generate one documentation page "
"soubor. Všechny jsou pak uvedené seřazené v hlavním dokumentu."
#. (itstool) path: sect1/para
-#: C/index.docbook:1734
+#: C/index.docbook:1716
msgid ""
"While GTK-Doc creates a template master document for you, later runs will "
"not touch it again. This means that one can freely structure the "
"nahlédnout, jestli se v něm neobjevily nějaké nové věci."
#. (itstool) path: tip/para
-#: C/index.docbook:1744
+#: C/index.docbook:1726
msgid ""
"Do not create tutorials as extra documents. Just write extra chapters. The "
"benefit of directly embedding the tutorial for your library into the API "
"v knihovně."
#. (itstool) path: sect1/para
-#: C/index.docbook:1753
+#: C/index.docbook:1735
msgid ""
"So what are the things to change inside the master document? For a start is "
"only a little. There are some placeholders (text in square brackets) there "
"závorkách), o které byste se měli postarat."
#. (itstool) path: example/title
-#: C/index.docbook:1760
+#: C/index.docbook:1742
msgid "Master document header"
msgstr "Hlavička hlavního dokumentu"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1761
+#: C/index.docbook:1743
#, no-wrap
msgid ""
"\n"
" <title>[Insert title here]</title>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1777
+#: C/index.docbook:1759
msgid ""
"In addition a few option elements are created in commented form. You can "
"review these and enable them as you like."
"projít a případně povolit."
#. (itstool) path: example/title
-#: C/index.docbook:1783
+#: C/index.docbook:1765
msgid "Optional part in the master document"
msgstr "Volitelná část hlavního dokumentu"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1784
+#: C/index.docbook:1766
#, no-wrap
msgid ""
"\n"
" <!-- enable this when you use gobject introspection annotations\n"
" <xi:include href=\"xml/annotation-glossary.xml\"><xi:fallback /></xi:include>\n"
-" --> \n"
+" -->\n"
msgstr ""
"\n"
" <!-- enable this when you use gobject introspection annotations\n"
" <xi:include href=\"xml/annotation-glossary.xml\"><xi:fallback /></xi:include>\n"
-" --> \n"
+" -->\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1792
+#: C/index.docbook:1774
msgid ""
"Finally you need to add new section whenever you introduce one. The <link "
"linkend=\"modernizing-gtk-doc-1-16\">gtkdoc-check</link> tool will remind "
"vygenerované soubory XML, které zatím nejsou v dokumentaci zahrnuté."
#. (itstool) path: example/title
-#: C/index.docbook:1800 C/index.docbook:1835
+#: C/index.docbook:1782 C/index.docbook:1817
msgid "Including generated sections"
msgstr "Vkládání generovaných oddílů"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1801
+#: C/index.docbook:1783
#, no-wrap
msgid ""
"\n"
" …\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:1813
+#: C/index.docbook:1795
msgid "Editing the section file"
msgstr "Úprava souboru oddílů"
#. (itstool) path: sect1/para
-#: C/index.docbook:1815
+#: C/index.docbook:1797
msgid ""
"The section file is used to organise the documentation output by GTK-Doc. "
"Here one specifies which symbol belongs to which module or class and control "
"viditelnost (jestli je veřejný nebo soukromý)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1821
+#: C/index.docbook:1803
msgid ""
"The section file is a plain text file with tags delimiting sections. Blank "
"lines are ignored and lines starting with a '#' are treated as comment lines."
"jako s komentářovými řádky."
#. (itstool) path: note/para
-#: C/index.docbook:1828
+#: C/index.docbook:1810
msgid ""
"While the tags make the file look like xml, it is not. Please do not close "
"tags like <SUBSECTION>."
"Neuzavírejte prosím značky jako je <SUBSECTION>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1836
+#: C/index.docbook:1818
#, no-wrap
msgid ""
"\n"
"</SECTION>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1853
+#: C/index.docbook:1835
msgid ""
"The <FILE> ... </FILE> tag is used to specify the file name, "
"without any suffix. For example, using '<FILE>gnome-config</"
"názvu třídy GObject převedeného na malá písmena.)"
#. (itstool) path: sect1/para
-#: C/index.docbook:1865
+#: C/index.docbook:1847
msgid ""
"The <TITLE> ... </TITLE> tag is used to specify the title of the "
"section. It is only useful before the templates (if used) are initially "
"zdrojovém kódu."
#. (itstool) path: sect1/para
-#: C/index.docbook:1872
+#: C/index.docbook:1854
msgid ""
"You can group items in the section by using the <SUBSECTION> tag. "
"Currently it outputs a blank line between subsections in the synopsis "
"virtuální metody)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1891
+#: C/index.docbook:1873
msgid ""
"You can also use <INCLUDE> ... </INCLUDE> to specify the "
"#include files which are shown in the synopsis sections. It contains a comma-"
"konce souboru. Když je nastavíte v konkrétním oddílu, použijí se jen pro něj."
#. (itstool) path: chapter/title
-#: C/index.docbook:1905
+#: C/index.docbook:1887
msgid "Controlling the result"
msgstr "Ovlivnění výsledku"
#. (itstool) path: chapter/para
-#: C/index.docbook:1907
+#: C/index.docbook:1889
msgid ""
"A GTK-Doc run generates report files inside the documentation directory. The "
"generated files are named: <filename><package>-undocumented.txt</"
"prosté textové soubory, které si lze jednoduše prohlížet a zpracovávat je."
#. (itstool) path: chapter/para
-#: C/index.docbook:1916
+#: C/index.docbook:1898
msgid ""
"The <filename><package>-undocumented.txt</filename> file starts with "
"the documentation coverage summary. Below are two sections divided by blank "
"parametr."
#. (itstool) path: chapter/para
-#: C/index.docbook:1925
+#: C/index.docbook:1907
msgid ""
"The <filename><package>-undeclared.txt</filename> file lists symbols "
"given in the <filename><package>-sections.txt</filename> but not found "
"v nich není překlep."
#. (itstool) path: chapter/para
-#: C/index.docbook:1932
+#: C/index.docbook:1914
msgid ""
"The <filename><package>-unused.txt</filename> file lists symbol names, "
"where the GTK-Doc scanner has found documentation, but does not know where "
"balíček>-section.txt</filename>."
#. (itstool) path: tip/para
-#: C/index.docbook:1940
+#: C/index.docbook:1922
msgid ""
"Enable or add the <option>TESTS=$(GTKDOC_CHECK)</option> line in Makefile."
"am. If at least GTK-Doc 1.9 is installed, this will run sanity checks during "
"správnosti údajů."
#. (itstool) path: chapter/para
-#: C/index.docbook:1947
+#: C/index.docbook:1929
msgid ""
"One can also look at the files produced by the source code scanner: "
"<filename><package>-decl-list.txt</filename> and <filename><"
"zkontrolovat, jestli se vyskytuje v tomto souboru."
#. (itstool) path: chapter/para
-#: C/index.docbook:1956
+#: C/index.docbook:1938
msgid ""
"If the project is GObject based, one can also look into the files produced "
"by the object scanner: <filename><package>.args.txt</filename>, "
"Doc, aby přechodně zachovat soubor pro pozdější analýzu."
#. (itstool) path: chapter/title
-#: C/index.docbook:1971
+#: C/index.docbook:1953
msgid "Modernizing the documentation"
msgstr "Modernizace dokumentu"
#. (itstool) path: chapter/para
-#: C/index.docbook:1973
+#: C/index.docbook:1955
msgid ""
"GTK-Doc has been around for quite some time. In this section we list new "
"features together with the version since when it is available."
"funkcí spolu s číslem verze, od které je tato funkčnost k dispozici."
#. (itstool) path: sect1/title
-#: C/index.docbook:1979
+#: C/index.docbook:1961
msgid "GTK-Doc 1.9"
msgstr "GTK-Doc 1.9"
#. (itstool) path: sect1/para
-#: C/index.docbook:1981
+#: C/index.docbook:1963
msgid ""
"When using xml instead of sgml, one can actually name the master document "
"<filename><package>-docs.xml</filename>."
"dokument <filename><package>-docs.xml</filename>."
#. (itstool) path: sect1/para
-#: C/index.docbook:1986
+#: C/index.docbook:1968
msgid ""
"This version supports <option>SCAN_OPTIONS=--rebuild-sections</option> in "
"<filename>Makefile.am</filename>. When this is enabled, the <filename><"
"<code>meld <package>-decl-list.txt <package>-sections.txt</code>."
#. (itstool) path: sect1/para
-#: C/index.docbook:1997
+#: C/index.docbook:1979
msgid ""
"Version 1.8 already introduced the syntax for documenting sections in the "
"sources instead of the separate files under <filename class=\"directory"
"\">tmpl</filename>. This version adds options to switch the whole doc module "
"to not use the extra tmpl build step at all, by using <option>--flavour no-"
"tmpl</option> in <filename>configure.ac</filename>. If you don't have a "
-"<filename class=\"directory\">tmpl</filename> checked into you source "
+"<filename class=\"directory\">tmpl</filename> checked into your source "
"control system and haven't yet switched, just add the flag to "
"<filename>configure.ac</filename> and you are done."
msgstr ""
"tuto volbu do <filename>configure.ac</filename> a je to."
#. (itstool) path: sect1/title
-#: C/index.docbook:2009
+#: C/index.docbook:1991
msgid "GTK-Doc 1.10"
msgstr "GTK-Doc 1.10"
#. (itstool) path: sect1/para
-#: C/index.docbook:2011
+#: C/index.docbook:1993
msgid ""
"This version supports <option>SCAN_OPTIONS=--rebuild-types</option> in "
"<filename>Makefile.am</filename>. When this is enabled, the <filename><"
"filename> pro kód, který je sestavován podmíněně."
#. (itstool) path: sect1/title
-#: C/index.docbook:2022
+#: C/index.docbook:2004
msgid "GTK-Doc 1.16"
msgstr "GTK-Doc 1.16"
#. (itstool) path: example/title
-#: C/index.docbook:2028
+#: C/index.docbook:2010
msgid "Enable gtkdoc-check"
msgstr "Povolení gtkdoc-check"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2029
+#: C/index.docbook:2011
#, no-wrap
msgid ""
"\n"
"endif\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:2024
+#: C/index.docbook:2006
msgid ""
"This version includes a new tool called gtkdoc-check. This tool can run a "
"set of sanity checks on your documentation. It is enabled by adding these "
">"
#. (itstool) path: sect1/title
-#: C/index.docbook:2042
+#: C/index.docbook:2024
msgid "GTK-Doc 1.20"
msgstr "GTK-Doc 1.20"
#. (itstool) path: sect1/para
-#: C/index.docbook:2044
+#: C/index.docbook:2026
msgid ""
"Version 1.18 brought some initial markdown support. Using markdown in doc "
"comments is less intrusive than writing docbook xml. This version improves a "
"\"documenting_syntax\">syntax komentářů</link>."
#. (itstool) path: sect1/title
-#: C/index.docbook:2054
+#: C/index.docbook:2036
msgid "GTK-Doc 1.25"
msgstr "GTK-Doc 1.25"
#. (itstool) path: example/title
-#: C/index.docbook:2064
+#: C/index.docbook:2046
msgid "Use pre-generated entities"
msgstr "Používání předgenerovaných entit"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2065
+#: C/index.docbook:2047
#, no-wrap
msgid ""
"\n"
" </bookinfo>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:2056
+#: C/index.docbook:2038
msgid ""
"The makefiles shipped with this version generate an entity file at "
"<filename>xml/gtkdocentities.ent</filename>, containing entities for e.g. "
"package_name and package_version. You can use this e.g. in the main xml file "
-"to avoid hardcoding the version number. Below is any example that shows how "
+"to avoid hardcoding the version number. Below is an example that shows how "
"the entity file is included and how the entities are used. The entities can "
"also be used in all generated files, GTK-Doc will use the same xml header in "
"generated xml files. <_:example-1/>"
"hlavičku XML v generovaných souborech XML. <_:example-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:2090
+#: C/index.docbook:2072
msgid "Documenting other interfaces"
msgstr "Dokumentování ostatních rozhraní"
#. (itstool) path: chapter/para
-#: C/index.docbook:2092
+#: C/index.docbook:2074
msgid ""
"So far we have been using GTK-Doc to document the API of code. The next "
"sections contain suggestions how the tools can be used to document other "
"dalších rozhraní."
#. (itstool) path: sect1/title
-#: C/index.docbook:2099
+#: C/index.docbook:2081
msgid "Command line options and man pages"
msgstr "Přepínače příkazového řádku a manuálové stránky"
#. (itstool) path: sect1/para
-#: C/index.docbook:2101
+#: C/index.docbook:2083
msgid ""
"As one can generate man pages for a docbook refentry as well, it sounds like "
"a good idea to use it for that purpose. This way the interface is part of "
"manuálovou stránku."
#. (itstool) path: sect2/title
-#: C/index.docbook:2108
+#: C/index.docbook:2090
msgid "Document the tool"
msgstr "Dokumentování nástrojů"
#. (itstool) path: sect2/para
-#: C/index.docbook:2110
+#: C/index.docbook:2092
msgid ""
"Create one refentry file per tool. Following <link linkend="
"\"settingup_docfiles\">our example</link> we would call it <filename>meep/"
"souboru v podsložce XML, například v glib."
#. (itstool) path: sect2/title
-#: C/index.docbook:2120
+#: C/index.docbook:2102
msgid "Adding the extra configure check"
msgstr "Přidání doplňkových kontrol do configure"
#. (itstool) path: example/title
-#: C/index.docbook:2123 C/index.docbook:2141
+#: C/index.docbook:2105 C/index.docbook:2123
msgid "Extra configure checks"
msgstr "Dodatečné kontroly nastavení"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2124
+#: C/index.docbook:2106
#, no-wrap
msgid ""
"\n"
"AM_CONDITIONAL(ENABLE_MAN, test x$enable_man != xno)\n"
#. (itstool) path: sect2/title
-#: C/index.docbook:2138
+#: C/index.docbook:2120
msgid "Adding the extra makefile rules"
msgstr "Přidání doplňkových pravidel do Makefile"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2142
+#: C/index.docbook:2124
#, no-wrap
msgid ""
"\n"
"EXTRA_DIST += meep.xml\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:2164
+#: C/index.docbook:2146
msgid "DBus interfaces"
msgstr "Rozhraní D-Bus"
#. (itstool) path: sect1/para
-#: C/index.docbook:2166
+#: C/index.docbook:2148
msgid ""
"(FIXME: http://hal.freedesktop.org/docs/DeviceKit/DeviceKit.html, http://"
"cgit.freedesktop.org/DeviceKit/DeviceKit/tree/doc/dbus)"
"cgit.freedesktop.org/DeviceKit/DeviceKit/tree/doc/dbus)"
#. (itstool) path: chapter/title
-#: C/index.docbook:2175
+#: C/index.docbook:2157
msgid "Frequently asked questions"
msgstr "Často kladené dotazy"
#. (itstool) path: segmentedlist/segtitle
-#: C/index.docbook:2179
+#: C/index.docbook:2161
msgid "Question"
msgstr "Dotaz"
#. (itstool) path: segmentedlist/segtitle
-#: C/index.docbook:2180
+#: C/index.docbook:2162
msgid "Answer"
msgstr "Odpověď"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2182
+#: C/index.docbook:2164
msgid "No class hierarchy."
msgstr "Schází hierarchie třídy."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2183
+#: C/index.docbook:2165
msgid ""
"The objects <function>xxx_get_type()</function> function has not been "
"entered into the <filename><package>.types</filename> file."
"objektu <function>xxx_get_type()</function>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2189
+#: C/index.docbook:2171
msgid "Still no class hierarchy."
msgstr "Stále schází hierarchie třídy."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2190
+#: C/index.docbook:2172
msgid ""
"Missing or wrong naming in <filename><package>-sections.txt</filename> "
"file (see <ulink url=\"http://mail.gnome.org/archives/gtk-doc-list/2003-"
"doc-list/2003-October/msg00006.html\">vysvětlení</ulink>)."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2196
+#: C/index.docbook:2178
msgid "Damn, I have still no class hierarchy."
msgstr "Do háje, pořád nemám hierarchii třídy."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2197
+#: C/index.docbook:2179
msgid ""
"Is the object name (name of the instance struct, e.g. <type>GtkWidget</"
"type>) part of the normal section (don't put this into Standard or Private "
"Private)."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2204
+#: C/index.docbook:2186
msgid "No symbol index."
msgstr "Chybí rejstřík symbolů."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2205
+#: C/index.docbook:2187
msgid ""
"Does the <filename><package>-docs.{xml,sgml}</filename> contain a "
"index that xi:includes the generated index?"
"který vloží pomocí xi:include vygenerovaný rejstřík?"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2211
+#: C/index.docbook:2193
msgid "Symbols are not linked to their doc-section."
msgstr "Symbol nemá odkaz do svého oddílu dokumentace."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2212
+#: C/index.docbook:2194
msgid ""
"Is the doc-comment using the correct markup (added #,% or ())? Check if the "
"gtkdoc-fixxref warns about unresolvable xrefs."
"Podívejte se na varování gtkdoc-fixxref o nevyřešených křížových odkazech."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2218
+#: C/index.docbook:2200
msgid "A new class does not appear in the docs."
msgstr "Nová třída se neobjevila v dokumentaci."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2219
+#: C/index.docbook:2201
msgid ""
"Is the new page xi:included from <filename><package>-docs.{xml,sgml}</"
"filename>."
"{xml,sgml}</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2225
+#: C/index.docbook:2207
msgid "A new symbol does not appear in the docs."
msgstr "Nový symbol se neobjevil v dokumentaci."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2226
+#: C/index.docbook:2208
msgid ""
"Is the doc-comment properly formatted. Check for spelling mistakes in the "
"begin of the comment. Check if the gtkdoc-fixxref warns about unresolvable "
"<filename><package>-sections.txt</filename> ve veřejném pododdíle."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2234
+#: C/index.docbook:2216
msgid "A type is missing from the class hierarchy."
msgstr "V hierarchii třídy schází typ."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2235
+#: C/index.docbook:2217
msgid ""
"If the type is listed in <filename><package>.hierarchy</filename> but "
"not in <filename>xml/tree_index.sgml</filename> then double check that the "
"zobrazena."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2244
+#: C/index.docbook:2226
msgid "I get foldoc links for all gobject annotations."
msgstr ""
"Vytvořily se mi odkazy na složku s dokumentací pro všechny anotace k GObject"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2245
+#: C/index.docbook:2227
msgid ""
"Check that <filename>xml/annotation-glossary.xml</filename> is xi:included "
"from <filename><package>-docs.{xml,sgml}</filename>."
"pomocí xi:include z <filename><package>-docs.{xml,sgml}</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2253
+#: C/index.docbook:2235
msgid "Parameter described in source code comment block but does not exist"
msgstr ""
"Parametr je v komentářovém bloku zdrojového kódu popsaný, ale neexistuje."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2254
+#: C/index.docbook:2236
msgid ""
"Check if the prototype in the header has different parameter names as in the "
"source."
"než ve zdrojovém kódu."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2259
+#: C/index.docbook:2241
msgid "multiple \"IDs\" for constraint linkend: XYZ"
msgstr "Více „ID“ pro tentýž cíl odkazu: XYZ"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2260
+#: C/index.docbook:2242
msgid ""
"Symbol XYZ appears twice in <filename><package>-sections.txt</"
"filename> file."
"objevuje dvakrát."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2263
+#: C/index.docbook:2245
msgid ""
"Element typename in namespace '' encountered in para, but no template "
"matches."
"mu žádná šablona."
#. (itstool) path: chapter/title
-#: C/index.docbook:2270
+#: C/index.docbook:2252
msgid "Tools related to gtk-doc"
msgstr "Nástroje související s GTK-Doc"
#. (itstool) path: chapter/para
-#: C/index.docbook:2272
+#: C/index.docbook:2254
msgid ""
"GtkDocPlugin - a <ulink url=\"http://trac-hacks.org/wiki/GtkDocPlugin\">Trac "
"GTK-Doc</ulink> integration plugin, that adds API docs to a trac site and "
"dokumentaci k API na sledovací web a integruje ji do vyhledávání."
#. (itstool) path: chapter/para
-#: C/index.docbook:2277
+#: C/index.docbook:2259
msgid ""
"Gtkdoc-depscan - a tool (part of gtk-doc) to check used API against since "
"tags in the API to determine the minimum required version."
"releasing these examples in parallel under your choice of free software "
"license, such as the <_:ulink-1/>, to permit their use in free software."
msgstr ""
-
-#~ msgid "1.12"
-#~ msgstr "1.12"
-
-#~ msgid "Chris"
-#~ msgstr "Chris"
-
-#~ msgid "Lyttle"
-#~ msgstr "Lyttle"
-
-#~ msgid "chris@wilddev.net"
-#~ msgstr "chris@wilddev.net"
-
-#~ msgid "Dan"
-#~ msgstr "Dan"
-
-#~ msgid "Mueth"
-#~ msgstr "Mueth"
-
-#~ msgid "d-mueth@uchicago.edu"
-#~ msgstr "d-mueth@uchicago.edu"
-
-#~ msgid "Stefan"
-#~ msgstr "Stefan"
-
-#~ msgid "Kost"
-#~ msgstr "Kost"
-
-#~ msgid "ensonic@users.sf.net"
-#~ msgstr "ensonic@users.sf.net"
-
-#~ msgid "gtk-doc-list@gnome.org"
-#~ msgstr "gtk-doc-list@gnome.org"
-
-#~ msgid "2000, 2005, 2007-2009"
-#~ msgstr "2000, 2005, 2007-2009"
-
-#~ msgid "Dan Mueth and Chris Lyttle and Stefan Kost"
-#~ msgstr "Dan Mueth, Chris Lyttle a Stefan Kost"
-
-#~ msgid "1.11"
-#~ msgstr "1.11"
-
-#~ msgid "22 March 2008"
-#~ msgstr "22. březen 2008"
-
-#~ msgid "mal"
-#~ msgstr "mal"
-
-#~ msgid "GNOME doc-utils migration"
-#~ msgstr "Migrace GNOME doc-utils"
-
-#~ msgid ""
-#~ "<guilabel>DocBook DTD v3.0</guilabel> - This is the DocBook SGML DTD. "
-#~ "<ulink url=\"http://www.ora.com/davenport\" type=\"http\">http://www.ora."
-#~ "com/davenport</ulink>"
-#~ msgstr ""
-#~ "<guilabel>DocBook DTD v3.0</guilabel> - Jedná se o DocBook SGML DTD. "
-#~ "<ulink url=\"http://www.ora.com/davenport\" type=\"http\">http://www.ora."
-#~ "com/davenport</ulink>"
-
-#~ msgid ""
-#~ "<guilabel>Jade v1.1</guilabel> - This is a DSSSL processor for converting "
-#~ "SGML to various formats. <ulink url=\"http://www.jclark.com/jade\" type="
-#~ "\"http\">http://www.jclark.com/jade</ulink>"
-#~ msgstr ""
-#~ "<guilabel>Jade v1.1</guilabel> - Jedná se o procesor DSSSL na převod SGML "
-#~ "do různých formátů. <ulink url=\"http://www.jclark.com/jade\" type=\"http"
-#~ "\">http://www.jclark.com/jade</ulink>"
-
-#~ msgid ""
-#~ "<guilabel>Modular DocBook Stylesheets</guilabel> This is the DSSSL code "
-#~ "to convert DocBook to HTML (and a few other formats). It's used together "
-#~ "with jade. I've customized the DSSSL code slightly, in gtk-doc.dsl, to "
-#~ "colour the program code listings/declarations, and to support global "
-#~ "cross-reference indices in the generated HTML. <ulink url=\"http://nwalsh."
-#~ "com/docbook/dsssl\" type=\"http\">http://nwalsh.com/docbook/dsssl</ulink>"
-#~ msgstr ""
-#~ "<guilabel>Modular DocBook Stylesheets</guilabel> (Modulární stylopisy "
-#~ "DocBook) Jedná se o kód DSSSL na převod DocBook na HTML (a několik "
-#~ "dalších formátů). Používá se dohromady spolu s jade. Máme mírně "
-#~ "přizpůsobený kód DSSSL v gtk-doc.dsl, který obarví programový kód seznamů/"
-#~ "deklarací a podporuje indexy globálních křížových odkazů v generovaném "
-#~ "HTML. <ulink url=\"http://nwalsh.com/docbook/dsssl\" type=\"http\">http://"
-#~ "nwalsh.com/docbook/dsssl</ulink>"
-
-#~ msgid ""
-#~ "<guilabel>docbook-to-man</guilabel> - if you want to create man pages "
-#~ "from the DocBook. I've customized the 'translation spec' slightly, to "
-#~ "capitalise section headings and add the 'GTK Library' title at the top of "
-#~ "the pages and the revision date at the bottom. There is a link to this on "
-#~ "<ulink url=\"http://www.ora.com/davenport\" type=\"http\">http://www.ora."
-#~ "com/davenport</ulink> NOTE: This does not work yet."
-#~ msgstr ""
-#~ "<guilabel>docbook-to-man</guilabel> - pokud chcete vytvářet manuálové "
-#~ "stránky z DocBook. Máme mírně přizpůsobené „specifikace překladu“, aby se "
-#~ "hlavičky oddílů změnily na velká písmena a přidal se nadpis „GTK "
-#~ "Library“ (Knihovna GTK) na vrch stránky a datum revize na spodek stránky. "
-#~ "Zde je k tomu odkaz na <ulink url=\"http://www.ora.com/davenport\" type="
-#~ "\"http\">http://www.ora.com/davenport</ulink>. UPOZORNĚNÍ: Ještě to "
-#~ "nefunguje."
-
-#~ msgid ""
-#~ "There is no standard place where the DocBook Modular Stylesheets are "
-#~ "installed."
-#~ msgstr ""
-#~ "Není určeno žádné standardní místo, kam se mají Modular DocBook "
-#~ "Stylesheets nainstalovat."
-
-#~ msgid ""
-#~ "gtk-doc's configure script searches these 3 directories automatically:"
-#~ msgstr "Skript na nastavení gtk-doc prohledává automaticky tyto 3 složky:"
-
-#~ msgid ""
-#~ "<filename> /usr/lib/sgml/stylesheets/nwalsh-modular </filename> (used by "
-#~ "RedHat)"
-#~ msgstr ""
-#~ "<filename>/usr/lib/sgml/stylesheets/nwalsh-modular</filename> (používá "
-#~ "RedHat)"
-
-#~ msgid ""
-#~ "<filename> /usr/lib/dsssl/stylesheets/docbook </filename> (used by Debian)"
-#~ msgstr ""
-#~ "<filename>/usr/lib/dsssl/stylesheets/docbook</filename> (používá Debian)"
-
-#~ msgid "<filename> /usr/share/sgml/docbkdsl </filename> (used by SuSE)"
-#~ msgstr "<filename>/usr/share/sgml/docbkdsl</filename> (používá SuSE)"
-
-#~ msgid ""
-#~ "If you have the stylesheets installed somewhere else, you need to "
-#~ "configure gtk-doc using the option: <command> --with-dsssl-dir=<"
-#~ "PATH_TO_TOPLEVEL_STYLESHEETS_DIR> </command>"
-#~ msgstr ""
-#~ "Pokud máte stylopisy nainstalované kdekoliv jinde, potřebujete nastavit "
-#~ "gtk-doc pomocí přepínače: <command> --with-dsssl-dir=<"
-#~ "CESTA_KE_SLOŽCE_NEJVYŠŠÍ_ÚROVNĚ_SE_STYLOPISY></command>"
-
-#~ msgid ""
-#~ "Besides checking for the required Gtk-Doc version, this adds two "
-#~ "configure switches:"
-#~ msgstr ""
-#~ "Mimo kontroly požadované verze GTK-Doc se tímto přidají dva přepínače "
-#~ "nastavení:"
-
-#~ msgid ""
-#~ "You may also want to enable gtk-doc for the distcheckmake target. Just "
-#~ "add then one-liner show in the next example to you top-level "
-#~ "<filename>Makefile.am</filename>:"
-#~ msgstr ""
-#~ "Můžete také chtít povolit gtk-doc pro provádění make distcheck. Na to "
-#~ "přidejte do nejvyšší úrovně <filename>Makefile.am</filename> jeden řádek "
-#~ "ukázaný v následujícím příkladu:"
-
-#~ msgid ""
-#~ "FIXME having @title here, would put this title into a newly generated "
-#~ "section file, but later would be obsolete (right?)"
-#~ msgstr ""
-#~ "DOPLNIT sem @title, měl vkládal by se do nově generovaného soubor oddílů, "
-#~ "ale později by byl zrušený (?)"
-
-#~ msgid "(FIXME) (stability) (glib-enums, ...)"
-#~ msgstr "(DOPLNIT) (stabilita) (glib-enums, ...)"
-
-#~ msgid ".types"
-#~ msgstr ".types"
-
-#~ msgid "explanation"
-#~ msgstr "vysvětlení"
-
-#~ msgid "Wrong naming in section file (see <placeholder-1/>)"
-#~ msgstr "Špatné pojmenování v souboru oddílů (viz <placeholder-1/>)"
-
-#~ msgid "FIXME (<index> tag in main sgml file)"
-#~ msgstr "DOPLNIT (značka <index> v hlavním souboru sgml)"
-
-#~ msgid "FIXME (added #,% or () ?)"
-#~ msgstr "DOPLNIT (přidat #,% or () ?)"
-
-#~ msgid "FIXME (section file, types file, main-sgml file)"
-#~ msgstr "DOPLNIT (soubor oddílů, soubor typů, hlavní soubor sgml)"
-
-#~ msgid "FIXME (section file, proper doc comment)"
-#~ msgstr "DOPLNIT (soubor oddílů, správný komentář dokumentace)"
</legalnotice>
<revhistory>
- <revision><revnumber>1.25.1</revnumber> <date>21. březen 2016</date> <authorinitials>ss</authorinitials> <revremark>development version</revremark></revision>
+ <revision>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision><revnumber>1.26</revnumber> <date>11. srpen 2017</date> <authorinitials>ss</authorinitials> <revremark>přenesení všech nástrojů z jazyků Perl/Bash do jazyka Python</revremark></revision>
<revision><revnumber>1.25</revnumber> <date>21. březen 2016</date> <authorinitials>ss</authorinitials> <revremark>opravy chyb, pročištění testů</revremark></revision>
<revision><revnumber>1.24</revnumber> <date>29. května 2015</date> <authorinitials>ss</authorinitials> <revremark>oprava chyby</revremark></revision>
<revision><revnumber>1.23</revnumber> <date>17. květen 2015</date> <authorinitials>ss</authorinitials> <revremark>oprava chyby</revremark></revision>
<para>GTK-Doc pracuje na základě dokumentace funkcí umístěné přímo v souborech se zdrojovým kódem ve speciálně formátovaných komentářových blocích, nebo dokumentace přidané do souborů šablon, které GTK-Doc používá (ačkoliv je nutno poznamenat, že GTK-Doc dokumentuje pouze funkce, které jsou deklarované v hlavičkových souborech; pro statické funkce žádný výstup nevytváří).</para>
- <para>GTK-Doc sestává z řady perlových skriptů, z nichž každý provádí jinou část procesu.</para>
+ <para>GTK-Doc sestává z řady skriptů v jazyce Python, z nichž každý provádí jinou část procesu.</para>
<para>Celý proces se skládá z pěti hlavních kroků:</para>
<sect2 id="requirements">
<title>Požadavky</title>
- <para><guilabel>Perl v5</guilabel> – hlavní skripty jsou v jazyce Perl.</para>
+ <para><guilabel>Python 2/3</guilabel> – hlavní skripty jsou v jazyce Python.</para>
<para><guilabel>xsltproc</guilabel> – procesor xslt z knihovny libxslt <ulink url="http://xmlsoft.org/XSLT/" type="http">xmlsoft.org/XSLT/</ulink></para>
<para><guilabel>docbook-xsl</guilabel> – stylopisy XSL pro docbook <ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink></para>
- <para><guilabel>Python</guilabel> – pro gtkdoc-depscan (volitelné)</para>
<para>Něco z <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> nebo <guilabel>vim</guilabel> – (volitelné) používá se pro zvýraznění syntaxe u příkladů</para>
</sect2>
</sect1>
<para>GTK-Doc je standardně vypnuté! Nezapomeňte zadat přepínač „<option>--enable-gtk-doc</option>“ při dalším spuštění <filename>configure</filename>. Jinak se nainstaluje předgenerovaná dokumentace (která může mít význam pro uživatele, ale ne pro vývojáře).</para>
</important>
- <para>
- Furthermore it is recommended that you have the following line inside
- your <filename>configure.ac</filename> script.
- This allows <application>gtkdocize</application> to automatically copy the
- macro definition for <function>GTK_DOC_CHECK</function> to your project.
- </para>
+ <para>Mimo to je ještě doporučeno, abyste měli ve skriptu <filename>configure.ac</filename> následující řádek. Umožní to <application>gtkdocize</application> automaticky nakopírovat definice maker pro <function>GTK_DOC_CHECK</function> do vašeho projektu.</para>
<para>
<example><title>Příprava pro gtkdocize</title>
<varlistentry>
<term>SECTION:<název></term>
<listitem>
- <para>
- The name links the section documentation to the respective part in
- the <filename><package>-sections.txt</filename> file. The
- name given here should match the <FILE> tag in the
- <filename><package>-sections.txt</filename> file.
- </para>
+ <para>Název prováže oddíl dokumentace s příslušnou částí v souboru <filename><package>-sections.txt</filename>. Zde zadaný název musí odpovídat značce <SOUBOR> v souboru <filename><package>-sections.txt</filename>.</para>
</listitem>
</varlistentry>
<varlistentry>
*
* Signál ::foobarized je vyslán pokaždé, když někdo zkusí něco s @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
</programlisting>
</example>
<para>
<example><title>Volitelná část hlavního dokumentu</title>
- <programlisting><![CDATA[
- <!-- enable this when you use gobject introspection annotations
- <xi:include href="xml/annotation-glossary.xml"><xi:fallback /></xi:include>
- -->
-]]></programlisting>
+ <programlisting>
+ <!-- enable this when you use gobject introspection annotations
+ <xi:include href="xml/annotation-glossary.xml"><xi:fallback /></xi:include>
+ -->
+</programlisting>
</example>
</para>
<para>Tato verze podporuje <option>SCAN_OPTIONS=--rebuild-sections</option> v <filename>Makefile.am</filename>. Když je tato volba zapnutá, je <filename><package>-sections.txt</filename> generován automaticky a můžete jej odstranit ze správy verzí. To funguje hezky je u projektů, které mají pravidelnou strukturu (například jednotlivé páry souboru .c a .h vytvoří nový oddíl). Pokud máte projekt takto pečlivě organizovaný, vystačí si aktualizace ručně spravovaného souboru s oddíly s prostým spuštěním <code>meld <package>-decl-list.txt <package>-sections.txt</code>.</para>
- <para>
- Version 1.8 already introduced the syntax for documenting sections in
- the sources instead of the separate files under <filename class="directory">tmpl</filename>.
- This version adds options to switch the whole doc module to not use the
- extra tmpl build step at all, by using <option>--flavour no-tmpl</option>
- in <filename>configure.ac</filename>. If you don't have a <filename class="directory">tmpl</filename>
- checked into your source control system and haven't yet switched, just
- add the flag to <filename>configure.ac</filename> and you are done.
- </para>
+ <para>Již verze 1.18 zavedla syntax pro dokumentování oddílů ve zdrojovém kódu namísto zvláštních souborů ve složce <filename class="directory">tmpl</filename>. Tato verze přidává pomocí <option>--flavour no-tmpl</option> in <filename>configure.ac</filename> volbu pro přepnutí celého modulu dokumentace, aby nepoužíval speciální složku tmp během sestavení. Jestliže nepotřebujete udržovat <filename class="directory">tmpl</filename> v systému pro správu verzí ještě jste zatím přepnutí neprovedli, stačí přidat tuto volbu do <filename>configure.ac</filename> a je to.</para>
</sect1>
<sect1 id="modernizing-gtk-doc-1-10">
<sect1 id="modernizing-gtk-doc-1-25">
<title>GTK-Doc 1.25</title>
- <para>
- The makefiles shipped with this version generate an entity file at <filename>xml/gtkdocentities.ent</filename>,
- containing entities for e.g. package_name and package_version. You can
- use this e.g. in the main xml file to avoid hardcoding the version
- number. Below is an example that shows how the entity file is included
- and how the entities are used. The entities can also be used in all
- generated files, GTK-Doc will use the same xml header in generated xml
- files.
- <example><title>Use pre-generated entities</title>
- <programlisting><![CDATA[
-<?xml version="1.0"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+ <para>Soubory Makefile dodávané s touto verzí generují do <filename>xml/gtkdocentities.ent</filename> soubor s entitami, který obsahuje entity například pro package_name a package_version. Můžete je použít třeba v hlavním souboru XML, abyste nemuseli mít číslo verze zapsané natvrdo. Níže je uveden příklad, jak soubor s entitami vložit a jak entity použít. Použít je lze také ve všech generovaných souborech, GTK-Doc bude používat tu samou hlavičku XML v generovaných souborech XML. <example><title>Používání předgenerovaných entit</title>
+ <programlisting>
+<?xml version="1.0"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd"
[
- <!ENTITY % local.common.attrib "xmlns:xi CDATA #FIXED 'http://www.w3.org/2003/XInclude'">
- <!ENTITY % gtkdocentities SYSTEM "xml/gtkdocentities.ent">
+ <!ENTITY % local.common.attrib "xmlns:xi CDATA #FIXED 'http://www.w3.org/2003/XInclude'">
+ <!ENTITY % gtkdocentities SYSTEM "xml/gtkdocentities.ent">
%gtkdocentities;
-]>
-<book id="index" xmlns:xi="http://www.w3.org/2003/XInclude">
- <bookinfo>
- <title>&package_name; Reference Manual</title>
- <releaseinfo>
- for &package_string;.
- The latest version of this documentation can be found on-line at
- <ulink role="online-location" url="http://[SERVER]/&package_name;/index.html">http://[SERVER]/&package_name;/</ulink>.
- </releaseinfo>
- </bookinfo>
-]]></programlisting>
- </example>
- </para>
+]>
+<book id="index" xmlns:xi="http://www.w3.org/2003/XInclude">
+ <bookinfo>
+ <title>&Referenční příručka k package_name;</title>
+ <releaseinfo>
+ for &package_string;.
+ Nejnovější verzi této dokumentace můžete najít on-line na
+ <ulink role="online-location" url="http://[SERVER]/&package_name;/index.html">http://[SERVER]/&package_name;/</ulink>.
+ </releaseinfo>
+ </bookinfo>
+</programlisting>
+ </example></para>
</sect1>
</chapter>
msgid ""
msgstr ""
"Project-Id-Version: gtk-doc help master\n"
-"POT-Creation-Date: 2017-03-21 20:30+0000\n"
-"PO-Revision-Date: 2017-03-28 10:36+0200\n"
+"POT-Creation-Date: 2017-08-11 11:08+0000\n"
+"PO-Revision-Date: 2017-08-21 20:36+0200\n"
"Last-Translator: Christian Kirbach <christian.kirbach@gmail.com>\n"
"Language-Team: German <gnome-de@gnome.org>\n"
"Language: de\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 1.8.12\n"
+"X-Generator: Poedit 2.0.3\n"
#. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
msgctxt "_"
#. (itstool) path: revhistory/revision
#: C/index.docbook:83
msgid ""
-"<revnumber>1.2
5.1</revnumber> <date>21 March 2016</date> <authorinitials>ss</"
-"authorinitials> <revremark>development version</revremark>"
+"<revnumber>1.2
6.1</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>development</revremark>"
msgstr ""
-"<revnumber>1.25.1</revnumber> <date>21. März 2016</date> <authorinitials>ss</"
-"authorinitials> <revremark>Entwicklerversion</revremark>"
+"<revnumber>1.26.1</revnumber> <date>11. August 2017</date> "
+"<authorinitials>ss</authorinitials> <revremark>Entwicklerversion</revremark>"
#. (itstool) path: revhistory/revision
#: C/index.docbook:89
msgid ""
+"<revnumber>1.26</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>port all tools from perl/bash to python</"
+"revremark>"
+msgstr ""
+"<revnumber>1.26.1</revnumber> <date>11. August 2017</date> "
+"<authorinitials>ss</authorinitials> <revremark>Alle Werkzeuge von Perl/Bash "
+"nach Python portiert</revremark>"
+
+#. (itstool) path: revhistory/revision
+#: C/index.docbook:95
+msgid ""
"<revnumber>1.25</revnumber> <date>21 March 2016</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, test cleanups</revremark>"
msgstr ""
"authorinitials> <revremark>Fehlerbehebungen, Test-Cleanups</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:95
+#: C/index.docbook:101
msgid ""
"<revnumber>1.24</revnumber> <date>29 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fix</revremark>"
"authorinitials> <revremark>Fehlerbehebungen</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:101
+#: C/index.docbook:107
msgid ""
"<revnumber>1.23</revnumber> <date>17 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fix</revremark>"
"authorinitials> <revremark>Fehlerbehebungen</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:107
+#: C/index.docbook:113
msgid ""
"<revnumber>1.22</revnumber> <date>07 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, dropping deprecated features</"
"revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:113
+#: C/index.docbook:119
msgid ""
"<revnumber>1.21</revnumber> <date>17 Jul 2014</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, dropping deprecated features</"
"revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:119
+#: C/index.docbook:125
msgid ""
"<revnumber>1.20</revnumber> <date>16 Feb 2014</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, markdown support, style improvements</"
"Unterstützung für Markdown, Layoutverbesserungen</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:125
+#: C/index.docbook:131
msgid ""
"<revnumber>1.19</revnumber> <date>05 Jun 2013</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes</revremark>"
"authorinitials> <revremark>Fehlerbehebungen</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:131
+#: C/index.docbook:137
msgid ""
"<revnumber>1.18</revnumber> <date>14 Sep 2011</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, speedups, markdown support</revremark>"
"Geschwindigkeit, Unterstützung für markdown</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:137
+#: C/index.docbook:143
msgid ""
"<revnumber>1.17</revnumber> <date>26 Feb 2011</date> <authorinitials>sk</"
"authorinitials> <revremark>urgent bug fix update</revremark>"
"Aktualisierung</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:143
+#: C/index.docbook:149
msgid ""
"<revnumber>1.16</revnumber> <date>14 Jan 2011</date> <authorinitials>sk</"
"authorinitials> <revremark>bugfixes, layout improvements</revremark>"
"authorinitials> <revremark>Bugfixes, Layoutverbesserungen</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:149
+#: C/index.docbook:155
msgid ""
"<revnumber>1.15</revnumber> <date>21 May 2010</date> <authorinitials>sk</"
"authorinitials> <revremark>bug and regression fixes</revremark>"
"authorinitials> <revremark>Bug- und Regressionsfixes</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:155
+#: C/index.docbook:161
msgid ""
"<revnumber>1.14</revnumber> <date>28 March 2010</date> <authorinitials>sk</"
"authorinitials> <revremark>bugfixes and performance improvements</revremark>"
"authorinitials> <revremark>Bugfixes und Leistungsverbesserungen</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:161
+#: C/index.docbook:167
msgid ""
"<revnumber>1.13</revnumber> <date>18 December 2009</date> "
"<authorinitials>sk</authorinitials> <revremark>broken tarball update</"
"beschädigten Tarballs</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:167
+#: C/index.docbook:173
msgid ""
"<revnumber>1.12</revnumber> <date>18 December 2009</date> "
"<authorinitials>sk</authorinitials> <revremark>new tool features and "
"revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:173
+#: C/index.docbook:179
msgid ""
"<revnumber>1.11</revnumber> <date>16 November 2008</date> "
"<authorinitials>mal</authorinitials> <revremark>GNOME doc-utils migration</"
"utils</revremark>"
#. (itstool) path: chapter/title
-#: C/index.docbook:186
+#: C/index.docbook:192
msgid "Introduction"
msgstr "Einführung"
#. (itstool) path: chapter/para
-#: C/index.docbook:188
+#: C/index.docbook:194
msgid ""
"This chapter introduces GTK-Doc and gives an overview of what it is and how "
"it is used."
"es sich dabei handelt und wie es benutzt wird."
#. (itstool) path: sect1/title
-#: C/index.docbook:194
+#: C/index.docbook:200
msgid "What is GTK-Doc?"
msgstr "Was ist GTK-Doc?"
#. (itstool) path: sect1/para
-#: C/index.docbook:196
+#: C/index.docbook:202
msgid ""
"GTK-Doc is used to document C code. It is typically used to document the "
"public API of libraries, such as the GTK+ and GNOME libraries. But it can "
"Anwendungscode verwendet werden."
#. (itstool) path: sect1/title
-#: C/index.docbook:204
+#: C/index.docbook:210
msgid "How Does GTK-Doc Work?"
msgstr "Wie funktioniert GTK-Doc?"
#. (itstool) path: sect1/para
-#: C/index.docbook:206
+#: C/index.docbook:212
msgid ""
"GTK-Doc works by using documentation of functions placed inside the source "
"files in specially-formatted comment blocks, or documentation added to the "
"keine Ausgaben für statische Funktionen."
#. (itstool) path: sect1/para
-#: C/index.docbook:213
+#: C/index.docbook:219
msgid ""
-"GTK-Doc consists of a number of perl scripts, each performing a different "
+"GTK-Doc consists of a number of python scripts, each performing a different "
"step in the process."
msgstr ""
-"GTK-Doc besteht aus einer Anzahl von Perl-Skripten, wovon jedes einen "
+"GTK-Doc besteht aus einer Anzahl von Python-Skripten, wovon jedes einen "
"bestimmten Schritt in dem Prozess ausführt."
#. (itstool) path: sect1/para
-#: C/index.docbook:218
+#: C/index.docbook:224
msgid "There are 5 main steps in the process:"
msgstr "Dieser Vorgang umfasst fünf Hauptschritte:"
#. (itstool) path: listitem/para
-#: C/index.docbook:225
+#: C/index.docbook:231
msgid ""
"<guilabel>Writing the documentation.</guilabel> The author fills in the "
"source files with the documentation for each function, macro, union etc. (In "
"eingegeben. Dies wird nicht mehr empfohlen."
#. (itstool) path: listitem/para
-#: C/index.docbook:235
+#: C/index.docbook:241
msgid ""
"<guilabel>Gathering information about the code.</guilabel> "
"<application>gtkdoc-scan</application> scans the header files of the code "
"<filename><module>-overrides.txt</filename> platzieren."
#. (itstool) path: listitem/para
-#: C/index.docbook:252
+#: C/index.docbook:258
msgid ""
"<application>gtkdoc-scangobj</application> can also be used to dynamically "
"query a library about any GObject subclasses it exports. It saves "
"und -Signale, die es bietet."
#. (itstool) path: listitem/para
-#: C/index.docbook:258
+#: C/index.docbook:264
msgid ""
"<application>gtkdoc-scanobj</application> should not be used anymore. It was "
"needed in the past when GObject was still GtkObject inside gtk+."
"GtkObject innerhalb von gtk+ war."
#. (itstool) path: listitem/para
-#: C/index.docbook:265
+#: C/index.docbook:271
msgid ""
"<guilabel>Generating the XML and HTML/PDF.</guilabel> <application>gtkdoc-"
"mkdb</application> turns the template files into XML files in the <filename "
"introspection-Daten gelesen."
#. (itstool) path: listitem/para
-#: C/index.docbook:274
+#: C/index.docbook:280
msgid ""
"<application>gtkdoc-mkhtml</application> turns the XML files into HTML files "
"in the <filename class=\"directory\">html/</filename> subdirectory. Likewise "
"in ein PDF-Dokument namens <filename><package>.pdf</filename>."
#. (itstool) path: listitem/para
-#: C/index.docbook:280
+#: C/index.docbook:286
msgid ""
"Files in <filename class=\"directory\">xml/</filename> and <filename class="
"\"directory\">html/</filename> directories are always overwritten. One "
"sollte diese direkt bearbeiten."
#. (itstool) path: listitem/para
-#: C/index.docbook:288
+#: C/index.docbook:294
msgid ""
"<guilabel>Fixing up cross-references between documents.</guilabel> After "
"installing the HTML files, <application>gtkdoc-fixxref</application> can be "
"lokale Verweise umzuwandeln (wo diese Dokumente installiert werden)."
#. (itstool) path: sect1/title
-#: C/index.docbook:306
+#: C/index.docbook:312
msgid "Getting GTK-Doc"
msgstr "GTK-Doc bekommen"
#. (itstool) path: sect2/title
-#: C/index.docbook:309
+#: C/index.docbook:315
msgid "Requirements"
msgstr "Erfordernisse"
#. (itstool) path: sect2/para
-#: C/index.docbook:310
-msgid "<guilabel>Perl v5</guilabel> - the main scripts are in Perl."
+#: C/index.docbook:316
+msgid ""
+"<guilabel>python 2/3</guilabel> - the main scripts are written in python."
msgstr ""
-"<guilabel>Perl v5</guilabel> - Die Hauptskripte wurden in Perl geschrieben."
+"<guilabel>Python 2/3</guilabel> - Die Hauptskripte wurden in Python "
+"geschrieben."
#. (itstool) path: sect2/para
-#: C/index.docbook:313
+#: C/index.docbook:319
msgid ""
"<guilabel>xsltproc</guilabel> - the xslt processor from libxslt <ulink url="
"\"http://xmlsoft.org/XSLT/\" type=\"http\">xmlsoft.org/XSLT/</ulink>"
"\"http://xmlsoft.org/XSLT/\" type=\"http\">xmlsoft.org/XSLT/</ulink>"
#. (itstool) path: sect2/para
-#: C/index.docbook:317
+#: C/index.docbook:323
msgid ""
"<guilabel>docbook-xsl</guilabel> - the docbook xsl stylesheets <ulink url="
"\"http://sourceforge.net/projects/docbook/files/docbook-xsl/\" type=\"http"
"\">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>"
#. (itstool) path: sect2/para
-#: C/index.docbook:321
-msgid "<guilabel>Python</guilabel> - optional - for gtkdoc-depscan"
-msgstr "<guilabel>Python</guilabel> - optional - für gtkdoc-depscan"
-
-#. (itstool) path: sect2/para
-#: C/index.docbook:324
+#: C/index.docbook:327
msgid ""
"One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> "
"or <guilabel>vim</guilabel> - optional - used for syntax highlighting of "
"<guilabel>vim</guilabel> - optional - für Syntax-Hervorhebung von Beispielen"
#. (itstool) path: sect1/title
-#: C/index.docbook:332
+#: C/index.docbook:335
msgid "About GTK-Doc"
msgstr "Info zu GTK-Doc"
#. (itstool) path: sect1/para
-#: C/index.docbook:334 C/index.docbook:348
+#: C/index.docbook:337 C/index.docbook:351
msgid "(FIXME)"
msgstr "(FIXME)"
#. (itstool) path: sect1/para
-#: C/index.docbook:338
+#: C/index.docbook:341
msgid ""
"(History, authors, web pages, mailing list, license, future plans, "
"comparison with other similar systems.)"
"Vergleich mit ähnlichen Systemen)"
#. (itstool) path: sect1/title
-#: C/index.docbook:346
+#: C/index.docbook:349
msgid "About this Manual"
msgstr "Über dieses Handbuch"
#. (itstool) path: sect1/para
-#: C/index.docbook:352
+#: C/index.docbook:355
msgid "(who it is meant for, where you can get it, license)"
msgstr "(wofür es bestimmt ist, wo Sie es erhalten können, Lizenz)"
#. (itstool) path: chapter/title
-#: C/index.docbook:361
+#: C/index.docbook:364
msgid "Setting up your project"
msgstr "Einrichten Ihres Projekts"
#. (itstool) path: chapter/para
-#: C/index.docbook:363
+#: C/index.docbook:366
msgid ""
"The next sections describe what steps to perform to integrate GTK-Doc into "
"your project. Theses sections assume we work on a project called 'meep'. "
"Erstellungsumgebung."
#. (itstool) path: sect1/title
-#: C/index.docbook:374
+#: C/index.docbook:377
msgid "Setting up a skeleton documentation"
msgstr "Einrichten des Grundgerüsts der Dokumentation"
#. (itstool) path: sect1/para
-#: C/index.docbook:376
+#: C/index.docbook:379
msgid ""
"Under your top-level project directory create folders called docs/reference "
"(this way you can also have docs/help for end-user documentation). It is "
"notwendig."
#. (itstool) path: example/title
-#: C/index.docbook:385
+#: C/index.docbook:388
msgid "Example directory structure"
msgstr "Beispiel für die Ordnerstruktur"
#. (itstool) path: example/programlisting
-#: C/index.docbook:386
+#: C/index.docbook:389
#, no-wrap
msgid ""
"\n"
" meeper/\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:383
+#: C/index.docbook:386
msgid "This can then look as shown below: <_:example-1/>"
msgstr "Dies kann dann wie nachstehend angezeigt aussehen: <_:example-1/>"
#. (itstool) path: sect1/title
#. (itstool) path: example/title
-#: C/index.docbook:401 C/index.docbook:408
+#: C/index.docbook:404 C/index.docbook:411
msgid "Integration with autoconf"
msgstr "Integration in autoconf"
#. (itstool) path: sect1/para
-#: C/index.docbook:403
+#: C/index.docbook:406
msgid ""
"Very easy! Just add one line to your <filename>configure.ac</filename> "
"script."
"filename>-Skript hinzu."
#. (itstool) path: example/programlisting
-#: C/index.docbook:409
+#: C/index.docbook:412
#, no-wrap
msgid ""
"\n"
"GTK_DOC_CHECK([1.14],[--flavour no-tmpl])\n"
#. (itstool) path: example/title
-#: C/index.docbook:421
+#: C/index.docbook:424
msgid "Keep gtk-doc optional"
msgstr "Halten Sie gtk-doc optional"
#. (itstool) path: example/programlisting
-#: C/index.docbook:422
+#: C/index.docbook:425
#, no-wrap
msgid ""
"\n"
"])\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:416
+#: C/index.docbook:419
msgid ""
"This will require all developers to have gtk-doc installed. If it is okay "
"for your project to have optional api-doc build setup, you can solve this as "
"Zeile sucht. <_:example-1/>"
#. (itstool) path: sect1/para
-#: C/index.docbook:433
+#: C/index.docbook:436
msgid ""
"The first argument is used to check for the gtkdocversion at configure time. "
"The 2nd, optional argument is used by <application>gtkdocize</application>. "
"hinzu:"
#. (itstool) path: listitem/para
-#: C/index.docbook:439
+#: C/index.docbook:442
msgid "--with-html-dir=PATH : path to installed docs"
msgstr "--with-html-dir=PATH : Pfad zur installierten Dokumentation"
#. (itstool) path: listitem/para
-#: C/index.docbook:440
+#: C/index.docbook:443
msgid "--enable-gtk-doc : use gtk-doc to build documentation [default=no]"
msgstr ""
"--enable-gtk-doc : gtk-doc zur Erstellung der Dokumentation verwenden "
"[Vorgabe=no]"
#. (itstool) path: listitem/para
-#: C/index.docbook:441
+#: C/index.docbook:444
msgid ""
"--enable-gtk-doc-html : build documentation in html format [default=yes]"
msgstr ""
"[Vorgabe=yes]"
#. (itstool) path: listitem/para
-#: C/index.docbook:442
+#: C/index.docbook:445
msgid "--enable-gtk-doc-pdf : build documentation in pdf format [default=no]"
msgstr ""
"--enable-gtk-doc-pdf : Erstellung der Dokumentation im PDF-Format "
"[Vorgabe=no]"
#. (itstool) path: important/para
-#: C/index.docbook:446
+#: C/index.docbook:449
msgid ""
"GTK-Doc is disabled by default! Remember to pass the option <option>'--"
"enable-gtk-doc'</option> to the next <filename>configure</filename> run. "
"aber nicht für Entwickler."
#. (itstool) path: sect1/para
-#: C/index.docbook:454
+#: C/index.docbook:457
msgid ""
-"Furthermore it is recommended that you have the following line inside you "
+"Furthermore it is recommended that you have the following line inside your "
"<filename>configure.ac</filename> script. This allows "
"<application>gtkdocize</application> to automatically copy the macro "
"definition for <function>GTK_DOC_CHECK</function> to your project."
"<function>GTK_DOC_CHECK</function> in Ihr Projekt."
#. (itstool) path: example/title
-#: C/index.docbook:462
+#: C/index.docbook:465
msgid "Preparation for gtkdocize"
msgstr "Vorbereitung für gtkdocize"
#. (itstool) path: example/programlisting
-#: C/index.docbook:463
+#: C/index.docbook:466
#, no-wrap
msgid ""
"\n"
"AC_CONFIG_MACRO_DIR(m4)\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:468
+#: C/index.docbook:471
msgid ""
"After all changes to <filename>configure.ac</filename> are made, update the "
"<filename>configure</filename> file. This can be done by re-running "
"<code>autogen.sh</code>."
#. (itstool) path: sect1/title
-#: C/index.docbook:476
+#: C/index.docbook:479
msgid "Integration with automake"
msgstr "Integration in automake"
#. (itstool) path: sect1/para
-#: C/index.docbook:478
+#: C/index.docbook:481
msgid ""
"First copy the <filename>Makefile.am</filename> from the <filename class="
"\"directory\">examples</filename> sub directory of the <ulink url=\"https://"
"Dokumentationspakete haben, müssen Sie dies für jedes davon wiederholen."
#. (itstool) path: sect1/para
-#: C/index.docbook:489
+#: C/index.docbook:492
msgid ""
"The next step is to edit the settings inside the <filename>Makefile.am</"
"filename>. All the settings have a comment above that describes their "
"unterstützten Parameter."
#. (itstool) path: sect1/title
-#: C/index.docbook:503
+#: C/index.docbook:506
msgid "Integration with autogen"
msgstr "Integration in autogen"
#. (itstool) path: sect1/para
-#: C/index.docbook:505
+#: C/index.docbook:508
msgid ""
"Most projects will have an <filename>autogen.sh</filename> script to setup "
"the build infrastructure after a checkout from version control system (such "
"oder autoconf ausgeführt werden."
#. (itstool) path: example/title
-#: C/index.docbook:514
+#: C/index.docbook:517
msgid "Running gtkdocize from autogen.sh"
msgstr "Ausführen von gtkdocize durch autogen.sh"
#. (itstool) path: example/programlisting
-#: C/index.docbook:515
+#: C/index.docbook:518
#, no-wrap
msgid ""
"\n"
"gtkdocize || exit 1\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:521
+#: C/index.docbook:524
msgid ""
"When running <application>gtkdocize</application> it copies <filename>gtk-"
"doc.make</filename> to your project root (or any directory specified by the "
"Parameter an <application>gtkdocize</application> zu übergeben."
#. (itstool) path: sect1/para
-#: C/index.docbook:530
+#: C/index.docbook:533
msgid ""
"Historically GTK-Doc was generating template files where developers entered "
"the docs. This turned out to be not so good (e.g. the need for having "
#. (itstool) path: sect1/title
#. (itstool) path: example/title
-#: C/index.docbook:547 C/index.docbook:564
+#: C/index.docbook:550 C/index.docbook:567
msgid "Running the doc build"
msgstr "Erstellung der Dokumentation"
#. (itstool) path: sect1/para
-#: C/index.docbook:549
+#: C/index.docbook:552
msgid ""
"After the previous steps it's time to run the build. First we need to rerun "
"<filename>autogen.sh</filename>. If this script runs configure for you, then "
"Option."
#. (itstool) path: sect1/para
-#: C/index.docbook:556
+#: C/index.docbook:559
msgid ""
"The first make run generates several additional files in the doc-"
"directories. The important ones are: <filename><package>.types</"
"(früher .sgml), <filename><package>-sections.txt</filename>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:565
+#: C/index.docbook:568
#, no-wrap
msgid ""
"\n"
"make\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:571
+#: C/index.docbook:574
msgid ""
"Now you can point your browser to <filename>docs/reference/<package>/"
"index.html</filename>. Yes, it's a bit disappointing still. But hang-on, "
"Seiten mit Leben füllen können."
#. (itstool) path: sect1/title
-#: C/index.docbook:579
+#: C/index.docbook:582
msgid "Integration with version control systems"
msgstr "Integration in Versionsverwaltungssysteme"
#. (itstool) path: sect1/para
-#: C/index.docbook:581
+#: C/index.docbook:584
msgid ""
"As a rule of thumb, it's the files you edit which should go under version "
"control. For typical projects it's these files: <filename><package>."
"sections.txt</filename>, <filename>Makefile.am</filename>."
#. (itstool) path: sect1/para
-#: C/index.docbook:589
+#: C/index.docbook:592
msgid ""
"Files in the <filename>xml/</filename> and <filename>html/</filename> "
"directories should not go under version control. Neither should any of the "
"keine der <filename>.stamp</filename>-Dateien."
#. (itstool) path: sect1/title
-#: C/index.docbook:597
+#: C/index.docbook:600
msgid "Integration with plain makefiles or other build systems"
msgstr "Integration in Klartext-Makefiles oder andere Erstellungssysteme"
#. (itstool) path: sect1/para
-#: C/index.docbook:599
+#: C/index.docbook:602
msgid ""
"In the case one does not want to use automake and therefore <filename>gtk-"
"doc.mak</filename> one will need to call the gtkdoc tools in the right order "
"(oder andere Werkzeuge) in der richtigen Reihenfolge aufrufen."
#. (itstool) path: example/title
-#: C/index.docbook:606
+#: C/index.docbook:609
msgid "Documentation build steps"
msgstr "Schritte zur Erstellung der Dokumentation"
#. (itstool) path: example/programlisting
-#: C/index.docbook:607
+#: C/index.docbook:610
#, no-wrap
msgid ""
"\n"
"gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:621
+#: C/index.docbook:624
msgid ""
"One will need to look at the <filename>Makefile.am</filename> and "
"<filename>gtk-doc.mak</filename> to pick the extra options needed."
"filename> anschauen, um die zusätzlich notwendigen Optionen herauszusuchen."
#. (itstool) path: sect1/title
-#: C/index.docbook:628
+#: C/index.docbook:631
msgid "Integration with CMake build systems"
msgstr "Integration in CMake-Erstellungssysteme"
#. (itstool) path: sect1/para
-#: C/index.docbook:630
+#: C/index.docbook:633
msgid ""
"GTK-Doc now provides a <filename>GtkDocConfig.cmake</filename> module (and "
"the corresponding <filename>GtkDocConfigVersion.cmake</filename> module). "
"integrieren können."
#. (itstool) path: example/title
-#: C/index.docbook:640
+#: C/index.docbook:643
msgid "Example of using GTK-Doc from CMake"
msgstr "Beispiel zur Verwendung von GTK-Doc mit CMake"
#. (itstool) path: example/programlisting
-#: C/index.docbook:641
+#: C/index.docbook:644
#, no-wrap
msgid ""
"\n"
" DESTINATION ${CMAKE_INSTALL_DOCDIR})\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:638
+#: C/index.docbook:641
msgid "The following example shows how to use this command. <_:example-1/>"
msgstr ""
"Das folgende Beispiel zeigt, wie dieser Befehl eingesetzt wird. <_:example-1/"
">"
#. (itstool) path: chapter/title
-#: C/index.docbook:666
+#: C/index.docbook:669
msgid "Documenting the code"
msgstr "Dokumentieren des Codes"
#. (itstool) path: chapter/para
-#: C/index.docbook:668
+#: C/index.docbook:671
msgid ""
"GTK-Doc uses source code comment with a special syntax for code "
"documentation. Further it retrieves information about your project structure "
"Informationen über die Syntax der Kommentare."
#. (itstool) path: note/title
-#: C/index.docbook:676
+#: C/index.docbook:679
msgid "Documentation placement"
msgstr "Platzierung der Dokumentation"
#. (itstool) path: note/para
-#: C/index.docbook:677
+#: C/index.docbook:680
msgid ""
"In the past most documentation had to be filled into files residing inside "
"the <filename>tmpl</filename> directory. This has the disadvantages that the "
"Konflikte mit Versionsverwaltungssystemen verursachen kann."
#. (itstool) path: note/para
-#: C/index.docbook:683
+#: C/index.docbook:686
msgid ""
"The avoid the aforementioned problems we suggest putting the documentation "
"inside the sources. This manual will only describe this way of documenting "
"ausschließlich dieser Weg des Dokumentierens des Quellcodes beschrieben."
#. (itstool) path: example/title
-#: C/index.docbook:694 C/index.docbook:720
+#: C/index.docbook:697 C/index.docbook:723
msgid "GTK-Doc comment block"
msgstr "GTK-Doc-Kommentarblock"
#. (itstool) path: example/programlisting
-#: C/index.docbook:695
+#: C/index.docbook:698
#, no-wrap
msgid ""
"\n"
"#endif\n"
#. (itstool) path: chapter/para
-#: C/index.docbook:690
+#: C/index.docbook:693
msgid ""
"The scanner can handle the majority of C headers fine. In the case of "
"receiving warnings from the scanner that look like a special case, one can "
"anweisen diese zu überspringen. <_:example-1/>"
#. (itstool) path: note/title
-#: C/index.docbook:704
+#: C/index.docbook:707
msgid "Limitations"
msgstr "Einschränkungen"
#. (itstool) path: note/para
-#: C/index.docbook:705
+#: C/index.docbook:708
msgid ""
"Note, that GTK-Doc's supports <code>#ifndef(__GTK_DOC_IGNORE__)</code> but "
"not <code>#if !defined(__GTK_DOC_IGNORE__)</code> or other combinations."
"andere Kombinationen."
#. (itstool) path: sect1/title
-#: C/index.docbook:715
+#: C/index.docbook:718
msgid "Documentation comments"
msgstr "Kommentare zur Dokumentation"
#. (itstool) path: example/programlisting
-#: C/index.docbook:721
+#: C/index.docbook:724
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:717
+#: C/index.docbook:720
msgid ""
"A multiline comment that starts with an additional '*' marks a documentation "
"block that will be processed by the GTK-Doc tools. <_:example-1/>"
"example-1/>"
#. (itstool) path: sect1/para
-#: C/index.docbook:730
+#: C/index.docbook:733
msgid ""
"The 'identifier' is one line with the name of the item the comment is "
"related to. The syntax differs a little depending on the item. (TODO add "
"variieren."
#. (itstool) path: sect1/para
-#: C/index.docbook:736
+#: C/index.docbook:739
msgid ""
"The 'documentation' block is also different for each symbol type. Symbol "
"types that get parameters such as functions or macros have the parameter "
"dahinter. Dies ist in vorformatiertem Text nützlich (Code-Auflistungen)."
#. (itstool) path: listitem/para
-#: C/index.docbook:753
+#: C/index.docbook:756
msgid ""
"What it is: The name for a class or function can sometimes be misleading for "
"people coming from a different background."
"führend sein für Personen, die einen anderen Hintergrund haben."
#. (itstool) path: listitem/para
-#: C/index.docbook:759
+#: C/index.docbook:762
msgid ""
"What it does: Tell about common uses. Put it in relation with the other API."
msgstr ""
"Verhältnis mit der anderen API."
#. (itstool) path: tip/para
-#: C/index.docbook:749
+#: C/index.docbook:752
msgid "When documenting code, describe two aspects: <_:itemizedlist-1/>"
msgstr ""
"Beim Dokumentieren von Code beschreiben Sie zwei Aspekte: <_:itemizedlist-1/>"
#. (itstool) path: listitem/para
-#: C/index.docbook:774
+#: C/index.docbook:777
msgid "Use function() to refer to functions or macros which take arguments."
msgstr ""
"Verwenden Sie function(), um einen Bezug zu Funktionen oder Makros "
"herzustellen, die Argumente akzeptieren."
#. (itstool) path: listitem/para
-#: C/index.docbook:779
+#: C/index.docbook:782
msgid ""
"Use @param to refer to parameters. Also use this when referring to "
"parameters of other functions, related to the one being described."
"bezogen auf jene, die Sie gerade beschreiben."
#. (itstool) path: listitem/para
-#: C/index.docbook:785
+#: C/index.docbook:788
msgid "Use %constant to refer to a constant, e.g. %G_TRAVERSE_LEAFS."
msgstr ""
"Benutzen Sie %constant, um einen Bezug auf eine Konstante herzustellen, z.B. "
"%G_TRAVERSE_LEAFS."
#. (itstool) path: listitem/para
-#: C/index.docbook:790
+#: C/index.docbook:793
msgid ""
"Use #symbol to refer to other types of symbol, e.g. structs and enums and "
"macros which don't take arguments."
"»structs« und »enums« und Makros, die keine Argumente benötigen."
#. (itstool) path: listitem/para
-#: C/index.docbook:796
+#: C/index.docbook:799
msgid "Use #Object::signal to refer to a GObject signal."
msgstr "Verwenden Sie #Object::signal, um auf ein GObject-Signal zu verweisen"
#. (itstool) path: listitem/para
-#: C/index.docbook:801
+#: C/index.docbook:804
msgid "Use #Object:property to refer to a GObject property."
msgstr ""
"Verwenden Sie #Object:property, um auf eine GObject-Eigenschaft zu verweisen."
#. (itstool) path: listitem/para
-#: C/index.docbook:806
+#: C/index.docbook:809
msgid ""
"Use #Struct.field to refer to a field inside a structure and #GObjectClass."
"foo_bar() to refer to a vmethod."
"verweisen und #GObjectClass.foo_bar() für eine vmethod."
#. (itstool) path: sect1/para
-#: C/index.docbook:768
+#: C/index.docbook:771
msgid ""
"One advantage of hyper-text over plain-text is the ability to have links in "
"the document. Writing the correct markup for a link can be tedious though. "
"itemizedlist-1/>"
#. (itstool) path: tip/para
-#: C/index.docbook:815
+#: C/index.docbook:818
msgid ""
"If you need to use the special characters '<', '>', '()', '@', '%', or "
"'#' in your documentation without GTK-Doc changing them you can use the XML "
"einem Backslash »\\« maskieren."
#. (itstool) path: sect1/para
-#: C/index.docbook:824
+#: C/index.docbook:827
msgid ""
"DocBook can do more than just links. One can also have lists, examples, "
"headings, and images. As of version 1.20, the preferred way is to use a "
"Listenobjekte als Zeilen, die mit einem Gedankenstrich beginnen."
#. (itstool) path: sect1/para
-#: C/index.docbook:835
+#: C/index.docbook:838
msgid ""
"While markdown is now preferred one can mix both. One limitation here is "
"that one can use docbook xml within markdown, but markdown within docbook "
"verwenden können, während Markdown in DocBook XML nicht unterstützt wird."
#. (itstool) path: sect1/para
-#: C/index.docbook:841
+#: C/index.docbook:844
msgid ""
"In older GTK-Doc releases, if you need support for additional formatting, "
"you would need to enable the usage of docbook XML tags inside doc-comments "
"die Option <option>--xml-mode</option> (oder <option>--sgml-mode</option>)."
#. (itstool) path: example/title
-#: C/index.docbook:850
+#: C/index.docbook:853
msgid "GTK-Doc comment block using Markdown"
msgstr "GTK-Doc-Kommentarblock in Markdown-Syntax"
#. (itstool) path: example/programlisting
-#: C/index.docbook:851
+#: C/index.docbook:854
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:890
+#: C/index.docbook:893
msgid ""
"More examples of what markdown tags are supported can be found in the <ulink "
"url=\"https://wiki.gnome.org/Projects/GTK%2B/DocumentationSyntax/Markdown"
"Markdown\">GTK+ Documentation Markdown Syntax Reference</ulink>."
#. (itstool) path: tip/para
-#: C/index.docbook:896
+#: C/index.docbook:899
msgid ""
"As already mentioned earlier GTK-Doc is for documenting public API. Thus one "
"cannot write documentation for static symbols. Nevertheless it is good to "
"Abschnittsdatei einzubauen."
#. (itstool) path: sect1/title
-#: C/index.docbook:910
+#: C/index.docbook:913
msgid "Documenting sections"
msgstr "Dokumentieren von Abschnitten"
#. (itstool) path: sect1/para
-#: C/index.docbook:912
+#: C/index.docbook:915
msgid ""
"Each section of the documentation contains information about one class or "
"module. To introduce the component one can write a section block. The short "
"Inhaltsverzeichnis verwendet. Alle @-Felder sind optional."
#. (itstool) path: example/title
-#: C/index.docbook:920
+#: C/index.docbook:923
msgid "Section comment block"
msgstr "Abschnitts-Kommentarblock"
#. (itstool) path: example/programlisting
-#: C/index.docbook:921
+#: C/index.docbook:924
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:940
+#: C/index.docbook:943
msgid "SECTION:<name>"
msgstr "SECTION:<name>"
#. (itstool) path: listitem/para
-#: C/index.docbook:942
+#: C/index.docbook:945
msgid ""
"The name links the section documentation to the respective part in the "
-"<filename><package>-sections.txt</filename> file. The name give here "
+"<filename><package>-sections.txt</filename> file. The name given here "
"should match the <FILE> tag in the <filename><package>-sections."
"txt</filename> file."
msgstr ""
"<filename><package>-sections.txt</filename> entsprechen."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:951
+#: C/index.docbook:954
msgid "@short_description"
msgstr "@short_description"
#. (itstool) path: listitem/para
-#: C/index.docbook:953
+#: C/index.docbook:956
msgid ""
"A one line description of the section, that later will appear after the "
"links in the TOC and at the top of the section page."
"im Inhaltsverzeichnis und oben in der Abschnittsseite erscheint."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:960
+#: C/index.docbook:963
msgid "@title"
msgstr "@title"
#. (itstool) path: listitem/para
-#: C/index.docbook:962
+#: C/index.docbook:965
msgid ""
"The section title defaults to <name> from the SECTION declaration. It "
"can be overridden with the @title field."
"kann im Feld @title überschrieben werden."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:969
+#: C/index.docbook:972
msgid "@section_id"
msgstr "@section_id"
#. (itstool) path: listitem/para
-#: C/index.docbook:971
+#: C/index.docbook:974
msgid ""
"Overrides the use of title as a section identifier. For GObjects the <"
"title> is used as a section_id and for other sections it is <"
"<MODUL>-<Titel>."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:979
+#: C/index.docbook:982
msgid "@see_also"
msgstr "@see_also"
#. (itstool) path: listitem/para
-#: C/index.docbook:981
+#: C/index.docbook:984
msgid "A list of symbols that are related to this section."
msgstr "Eine Liste von Symbolen, welche sich auf diesen Abschnitt beziehen."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:987
+#: C/index.docbook:990
msgid "@stability"
msgstr "@stability"
#. (itstool) path: listitem/para
-#: C/index.docbook:994
+#: C/index.docbook:997
msgid ""
"Stable - The intention of a Stable interface is to enable arbitrary third "
"parties to develop applications to these interfaces, release them, and have "
"von stark berechtigten."
#. (itstool) path: listitem/para
-#: C/index.docbook:1006
+#: C/index.docbook:1009
msgid ""
"Unstable - Unstable interfaces are experimental or transitional. They are "
"typically used to give outside developers early access to new or rapidly "
"Binärkompatibilität von einer minor-Freigabe zur nächsten gegeben."
#. (itstool) path: listitem/para
-#: C/index.docbook:1018
+#: C/index.docbook:1021
msgid ""
"Private - An interface that can be used within the GNOME stack itself, but "
"that is not documented for end-users. Such functions should only be used in "
"nur auf spezifizierte und dokumentierte Weisen verwendet werden."
#. (itstool) path: listitem/para
-#: C/index.docbook:1027
+#: C/index.docbook:1030
msgid ""
"Internal - An interface that is internal to a module and does not require "
"end-user documentation. Functions that are undocumented are assumed to be "
"intern angesehen."
#. (itstool) path: listitem/para
-#: C/index.docbook:989
+#: C/index.docbook:992
msgid ""
"An informal description of the stability level this API has. We recommend "
"the use of one of these terms: <_:itemizedlist-1/>"
"dafür einen der folgenden Begriffe: <_:itemizedlist-1/>"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1039
+#: C/index.docbook:1042
msgid "@include"
msgstr "@include"
#. (itstool) path: listitem/para
-#: C/index.docbook:1041
+#: C/index.docbook:1044
msgid ""
"The <literal>#include</literal> files to show in the section synopsis (a "
"comma separated list), overriding the global value from the <link linkend="
"Befehlszeile wird überschrieben. Dieser Punkt ist optional."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1050
+#: C/index.docbook:1053
msgid "@image"
msgstr "@image"
#. (itstool) path: listitem/para
-#: C/index.docbook:1052
+#: C/index.docbook:1055
msgid ""
"The image to display at the top of the reference page for this section. This "
"will often be some sort of a diagram to illustrate the visual appearance of "
"darstellt. Dieses Objekt ist optional."
#. (itstool) path: tip/para
-#: C/index.docbook:1063
+#: C/index.docbook:1066
msgid ""
"To avoid unnecessary recompilation after doc-changes put the section docs "
"into the c-source where possible."
"möglich ist."
#. (itstool) path: sect1/title
-#: C/index.docbook:1072
+#: C/index.docbook:1075
msgid "Documenting symbols"
msgstr "Dokumentieren von Symbolen"
#. (itstool) path: sect1/para
-#: C/index.docbook:1074
+#: C/index.docbook:1077
msgid ""
"Each symbol (function, macro, struct, enum, signal and property) is "
"documented in a separate block. The block is best placed close to the "
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1082 C/index.docbook:1148
+#: C/index.docbook:1085 C/index.docbook:1151
msgid "General tags"
msgstr "Allgemeine Markierungen"
#. (itstool) path: sect2/para
-#: C/index.docbook:1084
+#: C/index.docbook:1087
msgid ""
"You can add versioning information to all documentation elements to tell "
"when an API was introduced, or when it was deprecated."
"als veraltet markiert wurde."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1089
+#: C/index.docbook:1092
msgid "Versioning Tags"
msgstr "Versionierungs-Markierungen"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1090
+#: C/index.docbook:1093
msgid "Since:"
msgstr "Since:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1092
+#: C/index.docbook:1095
msgid "Description since which version of the code the API is available."
msgstr "Beschreibung, seit welcher Version des Codes die API verfügbar ist."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1097
+#: C/index.docbook:1100
msgid "Deprecated:"
msgstr "Deprecated:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1099
+#: C/index.docbook:1102
msgid ""
"Paragraph denoting that this function should no be used anymore. The "
"description should point the reader to the new API."
"enthalten."
#. (itstool) path: sect2/para
-#: C/index.docbook:1107
+#: C/index.docbook:1110
msgid ""
"You can also add stability information to all documentation elements to "
"indicate whether API stability is guaranteed for them for all future minor "
"Veröffentlichungen des Projekts garantiert wird."
#. (itstool) path: sect2/para
-#: C/index.docbook:1113
+#: C/index.docbook:1116
msgid ""
"The default stability level for all documentation elements can be set by "
"passing the <option>--default-stability</option> argument to "
"beschriebenen Werte."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1119
+#: C/index.docbook:1122
msgid "Stability Tags"
msgstr "Stabilitäts-Markierungen"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1120
+#: C/index.docbook:1123
msgid "Stability: Stable"
msgstr "Stability: Stable"
#. (itstool) path: listitem/para
-#: C/index.docbook:1122
+#: C/index.docbook:1125
msgid ""
"Mark the element as stable. This is for public APIs which are guaranteed to "
"remain stable for all future minor releases of the project."
"gewährleistet ist."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1129
+#: C/index.docbook:1132
msgid "Stability: Unstable"
msgstr "Stability: Unstable"
#. (itstool) path: listitem/para
-#: C/index.docbook:1131
+#: C/index.docbook:1134
msgid ""
"Mark the element as unstable. This is for public APIs which are released as "
"a preview before being stabilised."
"die als Vorschau vor der endgültigen Stabilisierung gedacht sind."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1137
+#: C/index.docbook:1140
msgid "Stability: Private"
msgstr "Stability: Private"
#. (itstool) path: listitem/para
-#: C/index.docbook:1139
+#: C/index.docbook:1142
msgid ""
"Mark the element as private. This is for interfaces which can be used by "
"tightly coupled modules, but not by arbitrary third parties."
"beliebigen Drittanbietern."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1149
+#: C/index.docbook:1152
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1169 C/index.docbook:1179
+#: C/index.docbook:1172 C/index.docbook:1182
msgid "Annotations"
msgstr "Anmerkungen"
#. (itstool) path: sect2/para
-#: C/index.docbook:1171
+#: C/index.docbook:1174
msgid ""
"Documentation blocks can contain annotation-tags. These tags will be "
"rendered with tooltips describing their meaning. The tags are used by "
"GObjectIntrospection/Annotations\" type=\"http\">Wiki</ulink>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1180
+#: C/index.docbook:1183
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1201 C/index.docbook:1230
+#: C/index.docbook:1204 C/index.docbook:1233
msgid "Function comment block"
msgstr "Kommentarblock einer Funktion"
#. (itstool) path: listitem/para
-#: C/index.docbook:1207
+#: C/index.docbook:1210
msgid ""
"Document whether returned objects, lists, strings, etc, should be freed/"
"unrefed/released."
"dereferenziert/freigegeben werden."
#. (itstool) path: listitem/para
-#: C/index.docbook:1213
+#: C/index.docbook:1216
msgid "Document whether parameters can be NULL, and what happens if they are."
msgstr ""
"Dokumentiert, ob Parameter NULL sein können, und was in diesem Fall "
"geschieht."
#. (itstool) path: listitem/para
-#: C/index.docbook:1218
+#: C/index.docbook:1221
msgid ""
"Mention interesting pre-conditions and post-conditions where appropriate."
msgstr ""
"es nützlich erscheint."
#. (itstool) path: sect2/para
-#: C/index.docbook:1203 C/index.docbook:1289
+#: C/index.docbook:1206 C/index.docbook:1292
msgid "Please remember to: <_:itemizedlist-1/>"
msgstr "Bitte denken Sie an: <_:itemizedlist-1/>"
#. (itstool) path: sect2/para
-#: C/index.docbook:1225
+#: C/index.docbook:1228
msgid ""
"Gtk-doc assumes all symbols (macros, functions) starting with '_' are "
"private. They are treated like static functions."
"beginnen, privat sind. Sie werden wie statische Funktionen behandelt."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1231
+#: C/index.docbook:1234
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: variablelist/title
-#: C/index.docbook:1252
+#: C/index.docbook:1255
msgid "Function tags"
msgstr "Funktions-Markierungen"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1253 C/index.docbook:1460
+#: C/index.docbook:1256 C/index.docbook:1463
msgid "Returns:"
msgstr "Returns:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1255
+#: C/index.docbook:1258
msgid "Paragraph describing the returned result."
msgstr "Abschnitt, der das zurückgegebene Ergebnis beschreibt."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1260
+#: C/index.docbook:1263
msgid "@...:"
msgstr "@...:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1262
+#: C/index.docbook:1265
msgid ""
"In case the function has variadic arguments, you should use this tag "
"(@Varargs: does also work for historic reasons)."
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1272 C/index.docbook:1274
+#: C/index.docbook:1275 C/index.docbook:1277
msgid "Property comment block"
msgstr "Property-Kommentarblock"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1275
+#: C/index.docbook:1278
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1287 C/index.docbook:1306
+#: C/index.docbook:1290 C/index.docbook:1309
msgid "Signal comment block"
msgstr "Signal-Kommentarblock"
#. (itstool) path: listitem/para
-#: C/index.docbook:1293
+#: C/index.docbook:1296
msgid ""
"Document when the signal is emitted and whether it is emitted before or "
"after other signals."
"anderen Signalen ausgegeben wird."
#. (itstool) path: listitem/para
-#: C/index.docbook:1299
+#: C/index.docbook:1302
msgid "Document what an application might do in the signal handler."
msgstr "Dokumentiert, was eine Anwendung in dem Signal-Handler tun könnte."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1307
+#: C/index.docbook:1310
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1324 C/index.docbook:1325
+#: C/index.docbook:1327 C/index.docbook:1328
msgid "Struct comment block"
msgstr "Struct-Kommentarblock"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1326
+#: C/index.docbook:1329
#, no-wrap
msgid ""
"\n"
"} FooWidget;\n"
#. (itstool) path: sect2/para
-#: C/index.docbook:1341
+#: C/index.docbook:1344
msgid ""
"Use <code>/*< private >*/</code> before the private struct fields you "
"want to hide. Use <code>/*< public >*/</code> for the reverse "
"verwenden Sie <code>/*< public >*/</code>."
#. (itstool) path: sect2/para
-#: C/index.docbook:1347
+#: C/index.docbook:1350
msgid ""
"If the first field is \"g_iface\", \"parent_instance\" or \"parent_class\" "
"it will be considered private automatically and doesn't need to be mentioned "
"erwähnt werden."
#. (itstool) path: sect2/para
-#: C/index.docbook:1353
+#: C/index.docbook:1356
msgid ""
"Struct comment blocks can also be used for GObjects and GObjectClasses. It "
"is usually a good idea to add a comment block for a class, if it has "
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1365 C/index.docbook:1366
+#: C/index.docbook:1368 C/index.docbook:1369
msgid "Enum comment block"
msgstr "Enum-Kommentarblock"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1367
+#: C/index.docbook:1370
#, no-wrap
msgid ""
"\n"
"} Something;\n"
#. (itstool) path: sect2/para
-#: C/index.docbook:1384
+#: C/index.docbook:1387
msgid ""
"Use <code>/*< private >*/</code> before the private enum values you "
"want to hide. Use <code>/*< public >*/</code> for the reverse "
"verwenden Sie <code>/*< public >*/</code>."
#. (itstool) path: sect1/title
-#: C/index.docbook:1395
+#: C/index.docbook:1398
msgid "Inline program documentation"
msgstr "Eingebettete Programmdokumentation"
#. (itstool) path: sect1/para
-#: C/index.docbook:1396
+#: C/index.docbook:1399
msgid ""
"You can document programs and their commandline interface using inline "
"documentation."
"eingebetteter Dokumentation."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1402
+#: C/index.docbook:1405
msgid "Tags"
msgstr "Schlagwörter"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1404
+#: C/index.docbook:1407
msgid "PROGRAM"
msgstr "PROGRAM"
#. (itstool) path: listitem/para
-#: C/index.docbook:1407
+#: C/index.docbook:1410
msgid "Defines the start of a program documentation."
msgstr "Definiert den Start einer Programmdokumentation"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1414
+#: C/index.docbook:1417
msgid "@short_description:"
msgstr "@short_description:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1416
+#: C/index.docbook:1419
msgid "Defines a short description of the program. (Optional)"
msgstr "Definiert eine Kurzbeschreibung des Programms (optional)."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1423
+#: C/index.docbook:1426
msgid "@synopsis:"
msgstr "@synopsis:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1425
+#: C/index.docbook:1428
msgid ""
"Defines the arguments, or list of arguments that the program can take. "
"(Optional)"
"akzeptiert (optional)."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1433
+#: C/index.docbook:1436
msgid "@see_also:"
msgstr "@see_also:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1435
+#: C/index.docbook:1438
msgid "See Also manual page section. (Optional)"
msgstr ""
"Der Abschnitt »SEE ALSO« in den man-Pages (Unix-Handbuchseiten, optional)."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1442
+#: C/index.docbook:1445
msgid "@arg:"
msgstr "@arg:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1444
+#: C/index.docbook:1447
msgid "Argument(s) passed to the program and their description. (Optional)"
msgstr ""
"Argument(e), die dem Programm übergeben wurden, und die zugehörige "
"Beschreibung (optional)."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1451
+#: C/index.docbook:1454
msgid "Description:"
msgstr "Description:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1453
+#: C/index.docbook:1456
msgid "A longer description of the program."
msgstr "Eine ausführlichere Beschreibung des Programms."
#. (itstool) path: listitem/para
-#: C/index.docbook:1462
+#: C/index.docbook:1465
msgid "Specificy what value(s) the program returns. (Optional)"
msgstr "Geben Sie an, welche Wert(e) das Programm zurück gibt (optional)."
#. (itstool) path: sect2/title
-#: C/index.docbook:1471
+#: C/index.docbook:1474
msgid "Example of program documentation."
msgstr "Beispiel einer Programmdokumentation."
#. (itstool) path: example/title
-#: C/index.docbook:1472
+#: C/index.docbook:1475
msgid "Program documentation block"
msgstr "Programm-Dokumentationsblock"
# Würde ich nicht übersetzen. Ein Entwickler schreibt stets in Englisch,
# die Übersetzung ist unsere Sache.
#. (itstool) path: example/programlisting
-#: C/index.docbook:1473
+#: C/index.docbook:1476
#, no-wrap
msgid ""
"\n"
"}\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:1499
+#: C/index.docbook:1502
msgid "Useful DocBook tags"
msgstr "Nützliche DocBook-Markierungen"
#. (itstool) path: sect1/para
-#: C/index.docbook:1501
+#: C/index.docbook:1504
msgid ""
"Here are some DocBook tags which are most useful when documenting the code."
msgstr ""
"von Code nützlich sein können."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1510
+#: C/index.docbook:1513
#, no-wrap
msgid ""
"\n"
"<link linkend=\"glib-Hash-Tables\">Hash Tables</link>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1506
+#: C/index.docbook:1509
msgid ""
"To link to another section in the GTK docs: <_:informalexample-1/> The "
"linkend is the SGML/XML id on the top item of the page you want to link to. "
"konform in »-« umgewandelt. "
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1523
+#: C/index.docbook:1526
#, no-wrap
msgid ""
"\n"
"<function>...</function>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1520
+#: C/index.docbook:1523
msgid ""
"To refer to an external function, e.g. a standard C function: <_:"
"informalexample-1/>"
"<_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1532
+#: C/index.docbook:1535
#, no-wrap
msgid ""
"\n"
"</example>\n"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1543
+#: C/index.docbook:1546
#, no-wrap
msgid ""
"\n"
"</informalexample>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1529
+#: C/index.docbook:1532
msgid ""
"To include example code: <_:informalexample-1/> or possibly this, for very "
"short code fragments which don't need a title: <_:informalexample-2/> For "
"Außerdem unterstützt GTK-Doc auch eine Abkürzung: |[ ... ]|"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1562
+#: C/index.docbook:1565
#, no-wrap
msgid ""
"\n"
"</itemizedlist>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1559
+#: C/index.docbook:1562
msgid "To include bulleted lists: <_:informalexample-1/>"
msgstr "Für eine Liste mit Aufzählungszeichen: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1582
+#: C/index.docbook:1585
#, no-wrap
msgid ""
"\n"
"</note>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1579
+#: C/index.docbook:1582
msgid ""
"To include a note which stands out from the text: <_:informalexample-1/>"
msgstr ""
"Für eine nicht zum eigentlichen Text gehörende Notiz: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1595
+#: C/index.docbook:1598
#, no-wrap
msgid ""
"\n"
"<type>unsigned char</type>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1592
+#: C/index.docbook:1595
msgid "To refer to a type: <_:informalexample-1/>"
msgstr "Für einen Bezug zu einem Typ: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1604
+#: C/index.docbook:1607
#, no-wrap
msgid ""
"\n"
"<structname>XFontStruct</structname>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1601
+#: C/index.docbook:1604
msgid ""
"To refer to an external structure (not one described in the GTK docs): <_:"
"informalexample-1/>"
"beschrieben wird): <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1613
+#: C/index.docbook:1616
#, no-wrap
msgid ""
"\n"
"<structfield>len</structfield>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1610
+#: C/index.docbook:1613
msgid "To refer to a field of a structure: <_:informalexample-1/>"
msgstr "Für einen Bezug zu einem Feld einer Struktur: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1622
+#: C/index.docbook:1625
#, no-wrap
msgid ""
"\n"
"<classname>GtkWidget</classname>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1619
+#: C/index.docbook:1622
msgid ""
"To refer to a class name, we could possibly use: <_:informalexample-1/> but "
"you'll probably be using #GtkWidget instead (to automatically create a link "
"- lesen Sie <link linkend=\"documenting_syntax\">die Abkürzungen</link>)."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1633
+#: C/index.docbook:1636
#, no-wrap
msgid ""
"\n"
"<emphasis>This is important</emphasis>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1630
+#: C/index.docbook:1633
msgid "To emphasize text: <_:informalexample-1/>"
msgstr "Zum Hervorheben von Text: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1642
+#: C/index.docbook:1645
#, no-wrap
msgid ""
"\n"
"<filename>/home/user/documents</filename>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1639
+#: C/index.docbook:1642
msgid "For filenames use: <_:informalexample-1/>"
msgstr "Für Dateinamen: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1651
+#: C/index.docbook:1654
#, no-wrap
msgid ""
"\n"
"<keycombo><keycap>Control</keycap><keycap>L</keycap></keycombo>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1648
+#: C/index.docbook:1651
msgid "To refer to keys use: <_:informalexample-1/>"
msgstr "Für einen Bezug zu einem Schlüssel: <_:informalexample-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:1661
+#: C/index.docbook:1664
msgid "Filling the extra files"
msgstr "Füllen der zusätzlichen Dateien"
#. (itstool) path: chapter/para
-#: C/index.docbook:1663
+#: C/index.docbook:1666
msgid ""
"There are a couple of extra files, that need to be maintained along with the "
"inline source code comments: <filename><package>.types</filename>, "
"<filename><package>-sections.txt</filename>."
#. (itstool) path: sect1/title
-#: C/index.docbook:1672
+#: C/index.docbook:1675
msgid "Editing the types file"
msgstr "Bearbeiten der Typendatei"
#. (itstool) path: sect1/para
-#: C/index.docbook:1674
+#: C/index.docbook:1677
msgid ""
"If your library or application includes GObjects, you want their signals, "
"arguments/parameters and position in the hierarchy to be shown in the "
"der Datei <filename><package>.types</filename> aufzulisten."
#. (itstool) path: example/title
-#: C/index.docbook:1683
+#: C/index.docbook:1686
msgid "Example types file snippet"
msgstr "Beispiel-Schnipsel einer Typen-Datei"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1684
+#: C/index.docbook:1687
#, no-wrap
msgid ""
"\n"
"gtk_arrow_get_type\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1695
+#: C/index.docbook:1698
msgid ""
"Since GTK-Doc 1.8 <application>gtkdoc-scan</application> can generate this "
"list for you. Just add \"--rebuild-types\" to SCAN_OPTIONS in "
"stellen."
#. (itstool) path: sect1/title
-#: C/index.docbook:1704
+#: C/index.docbook:1707
msgid "Editing the master document"
msgstr "Bearbeiten des Master-Dokuments"
#. (itstool) path: sect1/para
-#: C/index.docbook:1706
+#: C/index.docbook:1709
msgid ""
"GTK-Doc produces documentation in DocBook SGML/XML. When processing the "
"inline source comments, the GTK-Doc tools generate one documentation page "
"Hauptdokument schließt diese ein und setzt sie in die passende Reihenfolge."
#. (itstool) path: sect1/para
-#: C/index.docbook:1713
+#: C/index.docbook:1716
msgid ""
"While GTK-Doc creates a template master document for you, later runs will "
"not touch it again. This means that one can freely structure the "
"Neuigkeiten eingeführt werden."
#. (itstool) path: tip/para
-#: C/index.docbook:1723
+#: C/index.docbook:1726
msgid ""
"Do not create tutorials as extra documents. Just write extra chapters. The "
"benefit of directly embedding the tutorial for your library into the API "
"die gleichen Aktualisierungen erfährt wie die Bibliothek selbst."
#. (itstool) path: sect1/para
-#: C/index.docbook:1732
+#: C/index.docbook:1735
msgid ""
"So what are the things to change inside the master document? For a start is "
"only a little. There are some placeholders (text in square brackets) there "
"beachten sollten."
#. (itstool) path: example/title
-#: C/index.docbook:1739
+#: C/index.docbook:1742
msgid "Master document header"
msgstr "Kopfzeile des Master-Dokuments"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1740
+#: C/index.docbook:1743
#, no-wrap
msgid ""
"\n"
" <title>[Insert title here]</title>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1756
+#: C/index.docbook:1759
msgid ""
"In addition a few option elements are created in commented form. You can "
"review these and enable them as you like."
"können sich diese anschauen und aktivieren, wenn Sie wollen."
#. (itstool) path: example/title
-#: C/index.docbook:1762
+#: C/index.docbook:1765
msgid "Optional part in the master document"
msgstr "Optionaler Teil im Master-Dokument"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1763
+#: C/index.docbook:1766
#, no-wrap
msgid ""
"\n"
" --> \n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1771
+#: C/index.docbook:1774
msgid ""
"Finally you need to add new section whenever you introduce one. The <link "
"linkend=\"modernizing-gtk-doc-1-16\">gtkdoc-check</link> tool will remind "
"in der Dokumentation noch nicht erfasst sind."
#. (itstool) path: example/title
-#: C/index.docbook:1779 C/index.docbook:1814
+#: C/index.docbook:1782 C/index.docbook:1817
msgid "Including generated sections"
msgstr "Einbeziehen erzeugter Abschnitte"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1780
+#: C/index.docbook:1783
#, no-wrap
msgid ""
"\n"
" ...\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:1792
+#: C/index.docbook:1795
msgid "Editing the section file"
msgstr "Bearbeiten der Abschnittsdatei"
#. (itstool) path: sect1/para
-#: C/index.docbook:1794
+#: C/index.docbook:1797
msgid ""
"The section file is used to organise the documentation output by GTK-Doc. "
"Here one specifies which symbol belongs to which module or class and control "
"welcher Klasse gehört und regelt die Sichtbarkeit (öffentlich oder privat)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1800
+#: C/index.docbook:1803
msgid ""
"The section file is a plain text file with tags delimiting sections. Blank "
"lines are ignored and lines starting with a '#' are treated as comment lines."
"die mit »#« beginnen, werden als Kommentarzeilen behandelt."
#. (itstool) path: note/para
-#: C/index.docbook:1807
+#: C/index.docbook:1810
msgid ""
"While the tags make the file look like xml, it is not. Please do not close "
"tags like <SUBSECTION>."
"trügt. Bitte schließen Sie keine Markierungen wie <SUBSECTION>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1815
+#: C/index.docbook:1818
#, no-wrap
msgid ""
"\n"
"</SECTION>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1832
+#: C/index.docbook:1835
msgid ""
"The <FILE> ... </FILE> tag is used to specify the file name, "
"without any suffix. For example, using '<FILE>gnome-config</"
"Kleinbuchstaben)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1844
+#: C/index.docbook:1847
msgid ""
"The <TITLE> ... </TITLE> tag is used to specify the title of the "
"section. It is only useful before the templates (if used) are initially "
"das SECTION-Kommentar in den Quellen einsetzt, ist dies überflüssig."
#. (itstool) path: sect1/para
-#: C/index.docbook:1851
+#: C/index.docbook:1854
msgid ""
"You can group items in the section by using the <SUBSECTION> tag. "
"Currently it outputs a blank line between subsections in the synopsis "
"(Variablen, vmethods)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1870
+#: C/index.docbook:1873
msgid ""
"You can also use <INCLUDE> ... </INCLUDE> to specify the "
"#include files which are shown in the synopsis sections. It contains a comma-"
"Abschnitts festlegen, wirkt es nur in diesem Abschnitt."
#. (itstool) path: chapter/title
-#: C/index.docbook:1884
+#: C/index.docbook:1887
msgid "Controlling the result"
msgstr "Überprüfung des Ergebnisses"
#. (itstool) path: chapter/para
-#: C/index.docbook:1886
+#: C/index.docbook:1889
msgid ""
"A GTK-Doc run generates report files inside the documentation directory. The "
"generated files are named: <filename><package>-undocumented.txt</"
"werden."
#. (itstool) path: chapter/para
-#: C/index.docbook:1895
+#: C/index.docbook:1898
msgid ""
"The <filename><package>-undocumented.txt</filename> file starts with "
"the documentation coverage summary. Below are two sections divided by blank "
"Dokumentation haben, aber z.B. ein neuer Parameter hinzugefügt worden ist."
#. (itstool) path: chapter/para
-#: C/index.docbook:1904
+#: C/index.docbook:1907
msgid ""
"The <filename><package>-undeclared.txt</filename> file lists symbols "
"given in the <filename><package>-sections.txt</filename> but not found "
"geschrieben wurden."
#. (itstool) path: chapter/para
-#: C/index.docbook:1911
+#: C/index.docbook:1914
msgid ""
"The <filename><package>-unused.txt</filename> file lists symbol names, "
"where the GTK-Doc scanner has found documentation, but does not know where "
"wurde."
#. (itstool) path: tip/para
-#: C/index.docbook:1919
+#: C/index.docbook:1922
msgid ""
"Enable or add the <option>TESTS=$(GTKDOC_CHECK)</option> line in Makefile."
"am. If at least GTK-Doc 1.9 is installed, this will run sanity checks during "
"ausgeführt."
#. (itstool) path: chapter/para
-#: C/index.docbook:1926
+#: C/index.docbook:1929
msgid ""
"One can also look at the files produced by the source code scanner: "
"<filename><package>-decl-list.txt</filename> and <filename><"
"kann man prüfen, ob diese Datei es enthält."
#. (itstool) path: chapter/para
-#: C/index.docbook:1935
+#: C/index.docbook:1938
msgid ""
"If the project is GObject based, one can also look into the files produced "
"by the object scanner: <filename><package>.args.txt</filename>, "
"ausführen."
#. (itstool) path: chapter/title
-#: C/index.docbook:1950
+#: C/index.docbook:1953
msgid "Modernizing the documentation"
msgstr "Die Dokumentation modernisieren"
#. (itstool) path: chapter/para
-#: C/index.docbook:1952
+#: C/index.docbook:1955
msgid ""
"GTK-Doc has been around for quite some time. In this section we list new "
"features together with the version since when it is available."
"wir neue Features und die Version, mit der sie eingeführt wurden."
#. (itstool) path: sect1/title
-#: C/index.docbook:1958
+#: C/index.docbook:1961
msgid "GTK-Doc 1.9"
msgstr "GTK-Doc 1.9"
#. (itstool) path: sect1/para
-#: C/index.docbook:1960
+#: C/index.docbook:1963
msgid ""
"When using xml instead of sgml, one can actually name the master document "
"<filename><package>-docs.xml</filename>."
"<filename><package>-docs.xml</filename> nennen."
#. (itstool) path: sect1/para
-#: C/index.docbook:1965
+#: C/index.docbook:1968
msgid ""
"This version supports <option>SCAN_OPTIONS=--rebuild-sections</option> in "
"<filename>Makefile.am</filename>. When this is enabled, the <filename><"
"Abschnittsdatei sehr einfach aktualisiert werden."
#. (itstool) path: sect1/para
-#: C/index.docbook:1976
+#: C/index.docbook:1979
msgid ""
"Version 1.8 already introduced the syntax for documenting sections in the "
"sources instead of the separate files under <filename class=\"directory"
"\">tmpl</filename>. This version adds options to switch the whole doc module "
"to not use the extra tmpl build step at all, by using <option>--flavour no-"
"tmpl</option> in <filename>configure.ac</filename>. If you don't have a "
-"<filename class=\"directory\">tmpl</filename> checked into you source "
+"<filename class=\"directory\">tmpl</filename> checked into your source "
"control system and haven't yet switched, just add the flag to "
"<filename>configure.ac</filename> and you are done."
msgstr ""
"zusätzlicher tmpl-Erstellungsschritt mehr nötig ist. Dazu dient die Option "
"<option>--flavour no-tmpl</option> in <filename>configure.ac</filename>. "
"Wenn Sie keinen Ordner namens <filename class=\"directory\">tmpl</filename> "
-"unter Versionsverwaltung haben und noch nicht umgestellt haben, fügen Sie "
-"einfach die Option zu <filename>configure.ac</filename> hinzu, und die Sache "
-"ist erledigt."
+"in die Versionsverwaltung eingestellt haben und noch nicht umgestellt haben, "
+"fügen Sie einfach die Option zu <filename>configure.ac</filename> hinzu, und "
+"die Sache ist erledigt."
#. (itstool) path: sect1/title
-#: C/index.docbook:1988
+#: C/index.docbook:1991
msgid "GTK-Doc 1.10"
msgstr "GTK-Doc 1.10"
#. (itstool) path: sect1/para
-#: C/index.docbook:1990
+#: C/index.docbook:1993
msgid ""
"This version supports <option>SCAN_OPTIONS=--rebuild-types</option> in "
"<filename>Makefile.am</filename>. When this is enabled, the <filename><"
"soll."
#. (itstool) path: sect1/title
-#: C/index.docbook:2001
+#: C/index.docbook:2004
msgid "GTK-Doc 1.16"
msgstr "GTK-Doc 1.16"
#. (itstool) path: example/title
-#: C/index.docbook:2007
+#: C/index.docbook:2010
msgid "Enable gtkdoc-check"
msgstr "gtkdoc-check einschalten"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2008
+#: C/index.docbook:2011
#, no-wrap
msgid ""
"\n"
"endif\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:2003
+#: C/index.docbook:2006
msgid ""
"This version includes a new tool called gtkdoc-check. This tool can run a "
"set of sanity checks on your documentation. It is enabled by adding these "
"<filename>Makefile.am</filename> hinzu. <_:example-1/>"
#. (itstool) path: sect1/title
-#: C/index.docbook:2021
+#: C/index.docbook:2024
msgid "GTK-Doc 1.20"
msgstr "GTK-Doc 1.20"
#. (itstool) path: sect1/para
-#: C/index.docbook:2023
+#: C/index.docbook:2026
msgid ""
"Version 1.18 brought some initial markdown support. Using markdown in doc "
"comments is less intrusive than writing docbook xml. This version improves a "
"\">Kommentarsyntax</link>."
#. (itstool) path: sect1/title
-#: C/index.docbook:2033
+#: C/index.docbook:2036
msgid "GTK-Doc 1.25"
msgstr "GTK-Doc 1.25"
#. (itstool) path: example/title
-#: C/index.docbook:2043
+#: C/index.docbook:2046
msgid "Use pre-generated entities"
msgstr "Vorerzeugte Entitäten verwenden"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2044
+#: C/index.docbook:2047
#, no-wrap
msgid ""
"\n"
" </bookinfo>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:2035
+#: C/index.docbook:2038
msgid ""
"The makefiles shipped with this version generate an entity file at "
"<filename>xml/gtkdocentities.ent</filename>, containing entities for e.g. "
"package_name and package_version. You can use this e.g. in the main xml file "
-"to avoid hardcoding the version number. Below is any example that shows how "
+"to avoid hardcoding the version number. Below is an example that shows how "
"the entity file is included and how the entities are used. The entities can "
"also be used in all generated files, GTK-Doc will use the same xml header in "
"generated xml files. <_:example-1/>"
"die gleichen XML-Kopfeinträge auch in generierten Dateien. <_:example-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:2069
+#: C/index.docbook:2072
msgid "Documenting other interfaces"
msgstr "Dokumentieren anderer Schnittstellen"
#. (itstool) path: chapter/para
-#: C/index.docbook:2071
+#: C/index.docbook:2074
msgid ""
"So far we have been using GTK-Doc to document the API of code. The next "
"sections contain suggestions how the tools can be used to document other "
"Werkzeuge zum Dokumentieren anderer Schnittstellen eingesetzt werden können."
#. (itstool) path: sect1/title
-#: C/index.docbook:2078
+#: C/index.docbook:2081
msgid "Command line options and man pages"
msgstr "Befehlszeilenoptionen und Handbuchseiten"
#. (itstool) path: sect1/para
-#: C/index.docbook:2080
+#: C/index.docbook:2083
msgid ""
"As one can generate man pages for a docbook refentry as well, it sounds like "
"a good idea to use it for that purpose. This way the interface is part of "
"kostenfrei die man-Hilfeseite."
#. (itstool) path: sect2/title
-#: C/index.docbook:2087
+#: C/index.docbook:2090
msgid "Document the tool"
msgstr "Dokumentieren des Werkzeuges"
#. (itstool) path: sect2/para
-#: C/index.docbook:2089
+#: C/index.docbook:2092
msgid ""
"Create one refentry file per tool. Following <link linkend="
"\"settingup_docfiles\">our example</link> we would call it <filename>meep/"
"Beispiele (z.B. in glib) ansehen."
#. (itstool) path: sect2/title
-#: C/index.docbook:2099
+#: C/index.docbook:2102
msgid "Adding the extra configure check"
msgstr "Hinzufügen der zusätzlichen Configure-Überprüfungen"
#. (itstool) path: example/title
-#: C/index.docbook:2102 C/index.docbook:2120
+#: C/index.docbook:2105 C/index.docbook:2123
msgid "Extra configure checks"
msgstr "Zusätzliche Configure-Überprüfungen"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2103
+#: C/index.docbook:2106
#, no-wrap
msgid ""
"\n"
"AM_CONDITIONAL(ENABLE_MAN, test x$enable_man != xno)\n"
#. (itstool) path: sect2/title
-#: C/index.docbook:2117
+#: C/index.docbook:2120
msgid "Adding the extra makefile rules"
msgstr "Hinzufügen der zusätzlichen Makefile-Regeln"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2121
+#: C/index.docbook:2124
#, no-wrap
msgid ""
"\n"
"EXTRA_DIST += meep.xml\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:2143
+#: C/index.docbook:2146
msgid "DBus interfaces"
msgstr "DBus-Schnittstellen"
#. (itstool) path: sect1/para
-#: C/index.docbook:2145
+#: C/index.docbook:2148
msgid ""
"(FIXME: http://hal.freedesktop.org/docs/DeviceKit/DeviceKit.html, http://"
"cgit.freedesktop.org/DeviceKit/DeviceKit/tree/doc/dbus)"
"cgit.freedesktop.org/DeviceKit/DeviceKit/tree/doc/dbus)"
#. (itstool) path: chapter/title
-#: C/index.docbook:2154
+#: C/index.docbook:2157
msgid "Frequently asked questions"
msgstr "Häufig gestellte Fragen"
#. (itstool) path: segmentedlist/segtitle
-#: C/index.docbook:2158
+#: C/index.docbook:2161
msgid "Question"
msgstr "Frage"
#. (itstool) path: segmentedlist/segtitle
-#: C/index.docbook:2159
+#: C/index.docbook:2162
msgid "Answer"
msgstr "Antwort"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2161
+#: C/index.docbook:2164
msgid "No class hierarchy."
msgstr "Keine Klassenhierarchie."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2162
+#: C/index.docbook:2165
msgid ""
"The objects <function>xxx_get_type()</function> function has not been "
"entered into the <filename><package>.types</filename> file."
"die Datei <filename><package>.types</filename> eingegeben."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2168
+#: C/index.docbook:2171
msgid "Still no class hierarchy."
msgstr "Noch immer keine Klassenhierarchie."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2169
+#: C/index.docbook:2172
msgid ""
"Missing or wrong naming in <filename><package>-sections.txt</filename> "
"file (see <ulink url=\"http://mail.gnome.org/archives/gtk-doc-list/2003-"
"archives/gtk-doc-list/2003-October/msg00006.html\">Erklärung</ulink>)."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2175
+#: C/index.docbook:2178
msgid "Damn, I have still no class hierarchy."
msgstr "Verdammt, ich habe immer noch keine Klassenhierarchie."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2176
+#: C/index.docbook:2179
msgid ""
"Is the object name (name of the instance struct, e.g. <type>GtkWidget</"
"type>) part of the normal section (don't put this into Standard or Private "
"Teil des normalen Abschnitts (nicht in den Standard- oder Unterabschnitte)."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2183
+#: C/index.docbook:2186
msgid "No symbol index."
msgstr "Kein Symbolindex."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2184
+#: C/index.docbook:2187
msgid ""
"Does the <filename><package>-docs.{xml,sgml}</filename> contain a "
"index that xi:includes the generated index?"
"der den erstellten Index xi:enthält?"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2190
+#: C/index.docbook:2193
msgid "Symbols are not linked to their doc-section."
msgstr "Symbole werden nicht mit deren Dokumentationsbschnitt verknüpft."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2191
+#: C/index.docbook:2194
msgid ""
"Is the doc-comment using the correct markup (added #,% or ())? Check if the "
"gtkdoc-fixxref warns about unresolvable xrefs."
"»()«)? Prüfen Sie, ob gtkdoc-fixxref wegen nicht auflösbarer xrefs warnt."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2197
+#: C/index.docbook:2200
msgid "A new class does not appear in the docs."
msgstr "Eine neue Klasse erscheint nicht in der Dokumentation."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2198
+#: C/index.docbook:2201
msgid ""
"Is the new page xi:included from <filename><package>-docs.{xml,sgml}</"
"filename>."
"sgml}</filename>?"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2204
+#: C/index.docbook:2207
msgid "A new symbol does not appear in the docs."
msgstr "Ein neues Symbol erscheint nicht in der Dokumentation."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2205
+#: C/index.docbook:2208
msgid ""
"Is the doc-comment properly formatted. Check for spelling mistakes in the "
"begin of the comment. Check if the gtkdoc-fixxref warns about unresolvable "
"Abschnitt gelistet ist."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2213
+#: C/index.docbook:2216
msgid "A type is missing from the class hierarchy."
msgstr "Ein Typ fehlt in der Klassenhierarchie."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2214
+#: C/index.docbook:2217
msgid ""
"If the type is listed in <filename><package>.hierarchy</filename> but "
"not in <filename>xml/tree_index.sgml</filename> then double check that the "
"sie nicht angezeigt."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2223
+#: C/index.docbook:2226
msgid "I get foldoc links for all gobject annotations."
msgstr "Ich erhalte foldoc-Verweise für alle gobjekt-Anmerkungen."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2224
+#: C/index.docbook:2227
msgid ""
"Check that <filename>xml/annotation-glossary.xml</filename> is xi:included "
"from <filename><package>-docs.{xml,sgml}</filename>."
"<filename><package>-docs.{xml,sgml}</filename> xi:eingebunden ist."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2232
+#: C/index.docbook:2235
msgid "Parameter described in source code comment block but does not exist"
msgstr ""
"Parameter wird im Kommentarblock des Quellcodes beschrieben, aber existiert "
"nicht"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2233
+#: C/index.docbook:2236
msgid ""
"Check if the prototype in the header has different parameter names as in the "
"source."
"Header unterschiedlich sind"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2238
+#: C/index.docbook:2241
msgid "multiple \"IDs\" for constraint linkend: XYZ"
msgstr "Mehrfache »IDs« für »constraint linkend: XYZ«"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2239
+#: C/index.docbook:2242
msgid ""
"Symbol XYZ appears twice in <filename><package>-sections.txt</"
"filename> file."
"sections.txt</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2242
+#: C/index.docbook:2245
msgid ""
"Element typename in namespace '' encountered in para, but no template "
"matches."
"entspricht."
#. (itstool) path: chapter/title
-#: C/index.docbook:2249
+#: C/index.docbook:2252
msgid "Tools related to gtk-doc"
msgstr "Werkzeuge mit Bezug zu gtk-doc"
#. (itstool) path: chapter/para
-#: C/index.docbook:2251
+#: C/index.docbook:2254
msgid ""
"GtkDocPlugin - a <ulink url=\"http://trac-hacks.org/wiki/GtkDocPlugin\">Trac "
"GTK-Doc</ulink> integration plugin, that adds API docs to a trac site and "
"Seite hinzufügt und die trac-Suche einbindet."
#. (itstool) path: chapter/para
-#: C/index.docbook:2256
+#: C/index.docbook:2259
msgid ""
"Gtkdoc-depscan - a tool (part of gtk-doc) to check used API against since "
"tags in the API to determine the minimum required version."
"wie der <_:ulink-1/>, zu veröffentlichen, um ihren Gebrauch in freier "
"Software zu erlauben."
+#~ msgid "<guilabel>Python</guilabel> - optional - for gtkdoc-depscan"
+#~ msgstr "<guilabel>Python</guilabel> - optional - für gtkdoc-depscan"
+
#~ msgid ""
#~ "<guilabel>Generating the \"template\" files.</guilabel> "
#~ "<application>gtkdoc-mktmpl</application> creates a number of files in the "
</legalnotice>
<revhistory>
- <revision><revnumber>1.25.1</revnumber> <date>21. März 2016</date> <authorinitials>ss</authorinitials> <revremark>Entwicklerversion</revremark></revision>
+ <revision>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision><revnumber>1.26.1</revnumber> <date>11. August 2017</date> <authorinitials>ss</authorinitials> <revremark>Alle Werkzeuge von Perl/Bash nach Python portiert</revremark></revision>
<revision><revnumber>1.25</revnumber> <date>21. März 2015</date> <authorinitials>ss</authorinitials> <revremark>Fehlerbehebungen, Test-Cleanups</revremark></revision>
<revision><revnumber>1.24</revnumber> <date>29. Mai 2015</date> <authorinitials>sk</authorinitials> <revremark>Fehlerbehebungen</revremark></revision>
<revision><revnumber>1.23</revnumber> <date>17. Mai 2015</date> <authorinitials>sk</authorinitials> <revremark>Fehlerbehebungen</revremark></revision>
<para>GTK-Doc verwendet Funktionsdokumentationen, die sich in den Quelldateien innerhalb speziell formatierter Kommentarblöcke befinden, oder Dokumentation, die zu den von GTK-Doc verwendeten Vorlagendateien hinzugefügt wurde. Beachten Sie jedoch, dass GTK-Doc nur Funktionen dokumentieren wird, die in den Header-Dateien deklariert sind. Es erstellt keine Ausgaben für statische Funktionen.</para>
- <para>GTK-Doc besteht aus einer Anzahl von Perl-Skripten, wovon jedes einen bestimmten Schritt in dem Prozess ausführt.</para>
+ <para>GTK-Doc besteht aus einer Anzahl von Python-Skripten, wovon jedes einen bestimmten Schritt in dem Prozess ausführt.</para>
<para>Dieser Vorgang umfasst fünf Hauptschritte:</para>
<sect2 id="requirements">
<title>Erfordernisse</title>
- <para><guilabel>Perl v5</guilabel> - Die Hauptskripte wurden in Perl geschrieben.</para>
+ <para><guilabel>Python 2/3</guilabel> - Die Hauptskripte wurden in Python geschrieben.</para>
<para><guilabel>xsltproc</guilabel> - der xslt-Verarbeiter von libxslt <ulink url="http://xmlsoft.org/XSLT/" type="http">xmlsoft.org/XSLT/</ulink></para>
<para><guilabel>docbook-xsl</guilabel> - die docbook xsl-Stilvorlagen <ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink></para>
- <para><guilabel>Python</guilabel> - optional - für gtkdoc-depscan</para>
<para><guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> oder <guilabel>vim</guilabel> - optional - für Syntax-Hervorhebung von Beispielen</para>
</sect2>
</sect1>
<para>GTK-Doc ist standardmäßig deaktiviert! Denken Sie daran, die Option <option>'--enable-gtk-doc'</option> beim nächsten Durchlauf von <filename>configure</filename> zu übergeben. Anderenfalls wird die vorher erstellte Dokumentation installiert. Dies ergibt für Benutzer durchaus Sinn, aber nicht für Entwickler.</para>
</important>
- <para>
- Furthermore it is recommended that you have the following line inside
- your <filename>configure.ac</filename> script.
- This allows <application>gtkdocize</application> to automatically copy the
- macro definition for <function>GTK_DOC_CHECK</function> to your project.
- </para>
+ <para>Weiterhin ist es empfehlenswert, dass das <filename>configure.ac</filename>-Skript die folgende Zeile enthält. Dies erlaubt <application>gtkdocize</application> das automatische Kopieren der Makrodefinition für <function>GTK_DOC_CHECK</function> in Ihr Projekt.</para>
<para>
<example><title>Vorbereitung für gtkdocize</title>
<varlistentry>
<term>SECTION:<name></term>
<listitem>
- <para>
- The name links the section documentation to the respective part in
- the <filename><package>-sections.txt</filename> file. The
- name given here should match the <FILE> tag in the
- <filename><package>-sections.txt</filename> file.
- </para>
+ <para>Der Name verweist auf die Abschnittsdokumentation des entsprechenden Teils der Datei <filename><package>-sections.txt</filename>. Der hier angegebene Name sollte der Markierung <FILE> in der Datei <filename><package>-sections.txt</filename> entsprechen.</para>
</listitem>
</varlistentry>
<varlistentry>
</itemizedlist></para>
<example><title>Signal-Kommentarblock</title>
- <programlisting>
+ <programlisting><![CDATA[
/**
* FooWidget::foobarized:
* @widget: the widget that received the signal
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
-</programlisting>
+]]></programlisting>
</example>
</sect2>
<para>Diese Version unterstützt <option>SCAN_OPTIONS=--rebuild-sections</option> in <filename>Makefile.am</filename>. Wenn dies aktiviert ist, wird die Datei <filename><package>-sections.txt</filename> automatisch erzeugt und kann aus der Versionsverwaltung entfernt werden. Dies funktioniert nur sauber in Projekten, die eine strikt »reguläre« Struktur haben (zum Beispiel erzeugt jedes .{c,h}-Paar einen neuen Abschnitt). In einem solch sauber organisierten Projekt kann dann mit dem Befehl <code>meld <package>-decl-list.txt <package>-sections.txt</code> eine manuell verwaltete Abschnittsdatei sehr einfach aktualisiert werden.</para>
- <para>
- Version 1.8 already introduced the syntax for documenting sections in
- the sources instead of the separate files under <filename class="directory">tmpl</filename>.
- This version adds options to switch the whole doc module to not use the
- extra tmpl build step at all, by using <option>--flavour no-tmpl</option>
- in <filename>configure.ac</filename>. If you don't have a <filename class="directory">tmpl</filename>
- checked into your source control system and haven't yet switched, just
- add the flag to <filename>configure.ac</filename> and you are done.
- </para>
+ <para>In Version 1.8 wurde bereits die Syntax für Dokumentationsabschnitte in den Quelltexten anstelle von separaten Dateien unter <filename class="directory">tmpl</filename> eingeführt. Diese Version fügt Optionen zur Umstellung des gesamten Dokumentationsmoduls auf das neue Verhalten hinzu, so dass kein zusätzlicher tmpl-Erstellungsschritt mehr nötig ist. Dazu dient die Option <option>--flavour no-tmpl</option> in <filename>configure.ac</filename>. Wenn Sie keinen Ordner namens <filename class="directory">tmpl</filename> in die Versionsverwaltung eingestellt haben und noch nicht umgestellt haben, fügen Sie einfach die Option zu <filename>configure.ac</filename> hinzu, und die Sache ist erledigt.</para>
</sect1>
<sect1 id="modernizing-gtk-doc-1-10">
<sect1 id="modernizing-gtk-doc-1-25">
<title>GTK-Doc 1.25</title>
- <para>
- The makefiles shipped with this version generate an entity file at <filename>xml/gtkdocentities.ent</filename>,
- containing entities for e.g. package_name and package_version. You can
- use this e.g. in the main xml file to avoid hardcoding the version
- number. Below is an example that shows how the entity file is included
- and how the entities are used. The entities can also be used in all
- generated files, GTK-Doc will use the same xml header in generated xml
- files.
- <example><title>Use pre-generated entities</title>
- <programlisting><![CDATA[
-<?xml version="1.0"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+ <para>Die in dieser Version enthaltenen Make-Steuerdateien erzeugen die Entitätsdatei <filename>xml/gtkdocentities.ent</filename>, die Entitäten für beispielsweise package_name und package_version enthält. Sie können diese in der XML-Hauptdatei verwenden, um eine fest codierte Versionsnummer zu vermeiden. Nachfolgend finden Sie ein Beispiel, wie die Entitätsdatei einbezogen wird und und wie die Einträge verwendet werden. Die Entitäten können auch in allen generierten Dateien verwendet werden. GTK-Doc verwendet die gleichen XML-Kopfeinträge auch in generierten Dateien. <example><title>Vorerzeugte Entitäten verwenden</title>
+ <programlisting>
+<?xml version="1.0"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd"
[
- <!ENTITY % local.common.attrib "xmlns:xi CDATA #FIXED 'http://www.w3.org/2003/XInclude'">
- <!ENTITY % gtkdocentities SYSTEM "xml/gtkdocentities.ent">
+ <!ENTITY % local.common.attrib "xmlns:xi CDATA #FIXED 'http://www.w3.org/2003/XInclude'">
+ <!ENTITY % gtkdocentities SYSTEM "xml/gtkdocentities.ent">
%gtkdocentities;
-]>
-<book id="index" xmlns:xi="http://www.w3.org/2003/XInclude">
- <bookinfo>
- <title>&package_name; Reference Manual</title>
- <releaseinfo>
- for &package_string;.
+]>
+<book id="index" xmlns:xi="http://www.w3.org/2003/XInclude">
+ <bookinfo>
+ <title>&package_name; Reference Manual</title>
+ <releaseinfo>
+ for &package_string;.
The latest version of this documentation can be found on-line at
- <ulink role="online-location" url="http://[SERVER]/&package_name;/index.html">http://[SERVER]/&package_name;/</ulink>.
- </releaseinfo>
- </bookinfo>
-]]></programlisting>
- </example>
- </para>
+ <ulink role="online-location" url="http://[SERVER]/&package_name;/index.html">http://[SERVER]/&package_name;/</ulink>.
+ </releaseinfo>
+ </bookinfo>
+</programlisting>
+ </example></para>
</sect1>
</chapter>
</legalnotice>
<revhistory>
- <revision><revnumber>1.25.1</revnumber> <date>21 Μαρτίου 2016</date> <authorinitials>ss</authorinitials> <revremark>έκδοση ανάπτυξης</revremark></revision>
+ <revision>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision>
+ <revnumber>1.26</revnumber>
+ <date>11 Aug 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>port all tools from perl/bash to python</revremark>
+ </revision>
<revision><revnumber>1.25</revnumber> <date>21 Μαρτίου 2016</date> <authorinitials>ss</authorinitials> <revremark>διορθώσεις σφαλμάτων, εκαθάρριση δοκιμαστικού κώδικα</revremark></revision>
<revision><revnumber>1.24</revnumber> <date>29 Μαΐου 2015</date> <authorinitials>ss</authorinitials> <revremark>διόρθωση σφαλμάτων</revremark></revision>
<revision><revnumber>1.23</revnumber> <date>17 Μαΐου 2015</date> <authorinitials>ss</authorinitials> <revremark>διόρθωση σφαλμάτων</revremark></revision>
<para>Το GTK-Doc χρησιμοποιεί την τεκμηρίωση συναρτήσεων που έχει συμπεριληφθεί στα πηγαία αρχεία (εντός μπλοκ σχολίων με ειδική μορφή), ή την τεκμηρίωση που έχει προστεθεί στα πρότυπα αρχεία που χρησιμοποιεί το GTK-Doc (σημειώστε όμως ότι το GTK-Doc παράγει τεκμηρίωση μόνο για τις συναρτήσεις που δηλώνονται σε αρχεία κεφαλίδας· δεν παράγει τεκμηρίωση για στατικές συναρτήσεις).</para>
- <para>Το GTK-Doc αποτελείται από μια σειρά δέσμης ενεργειών perl, καθένα από τα οποία είναι υπεύθυνο για διαφορετικό στάδιο της όλης διαδικασίας.</para>
+ <para>
+ GTK-Doc consists of a number of python scripts, each performing a different step
+ in the process.
+ </para>
<para>Η διαδικασία περιλαμβάνει 5 κύρια στάδια:</para>
<sect2 id="requirements">
<title>Απαιτήσεις</title>
- <para><guilabel>Perl v5</guilabel> - οι κύριες δέσμες ενεργειών είναι γραμμένες σε Perl.</para>
+ <para>
+ <guilabel>python 2/3</guilabel> - the main scripts are written in python.
+ </para>
<para><guilabel>xsltproc</guilabel> - το πρόγραμμα xslt processor από τη βιβλιοθήκη libxslt <ulink url="http://xmlsoft.org/XSLT/" type="http">xmlsoft.org/XSLT/</ulink></para>
<para><guilabel>docbook-xsl</guilabel> - τα φύλλα στυλ docbook xsl <ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink></para>
- <para><guilabel>Python</guilabel> - προαιρετική - για το gtkdoc-depscan</para>
<para>Ένα από τα <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> ή <guilabel>vim</guilabel> - προαιρετικά - που χρησιμοποιούνται για την επισήμανση της σύνταξης στα παραδείγματα</para>
</sect2>
</sect1>
</itemizedlist></para>
<example><title>Ομάδα σχολίων σήματος</title>
- <programlisting>
+ <programlisting><![CDATA[
/**
* FooWidget::foobarized:
* @widget: the widget that received the signal
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
-</programlisting>
+]]></programlisting>
</example>
</sect2>
<revhistory>
<revision>
- <revnumber>1.25.1</revnumber>
- <date>21 March 2016</date>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
<authorinitials>ss</authorinitials>
- <revremark>development version</revremark>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision>
+ <revnumber>1.26</revnumber>
+ <date>11 Aug 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>port all tools from perl/bash to python</revremark>
</revision>
<revision>
<revnumber>1.25</revnumber>
<para>GTK-Doc works by using documentation of functions placed inside the source files in specially-formatted comment blocks, or documentation added to the template files which GTK-Doc uses (though note that GTK-Doc will only document functions that are declared in header files; it won't produce output for static functions).</para>
- <para>GTK-Doc consists of a number of Perl scripts, each performing a different step in the process.</para>
+ <para>
+ GTK-Doc consists of a number of python scripts, each performing a different step
+ in the process.
+ </para>
<para>There are 5 main steps in the process:</para>
<sect2 id="requirements">
<title>Requirements</title>
- <para><guilabel>Perl v5</guilabel> — the main scripts are in Perl.</para>
+ <para>
+ <guilabel>python 2/3</guilabel> - the main scripts are written in python.
+ </para>
<para>
<guilabel>xsltproc</guilabel> - the xslt processor from libxslt
<ulink url="http://xmlsoft.org/XSLT/" type="http">xmlsoft.org/XSLT/</ulink>
<ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>
</para>
<para>
- <guilabel>Python</guilabel> - optional - for gtkdoc-depscan
- </para>
- <para>
One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> or
<guilabel>vim</guilabel> - optional - used for syntax highlighting of examples
</para>
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
]]></programlisting>
</example>
msgid ""
msgstr ""
"Project-Id-Version: gtk-doc-help.master\n"
-"POT-Creation-Date: 2017-04-23 16:21+0000\n"
-"PO-Revision-Date: 2017-07-25 10:11+0200\n"
+"POT-Creation-Date: 2017-08-11 11:08+0000\n"
+"PO-Revision-Date: 2017-09-05 12:31+0200\n"
"Last-Translator: Daniel Mustieles <daniel.mustieles@gmail.com>\n"
"Language-Team: es <gnome-es-list@gnome.org>\n"
"Language: \n"
#. (itstool) path: revhistory/revision
#: C/index.docbook:83
+#| msgid ""
+#| "<revnumber>1.25.1</revnumber> <date>21 March 2016</date> "
+#| "<authorinitials>ss</authorinitials> <revremark>development version</"
+#| "revremark>"
msgid ""
-"<revnumber>1.2
5.1</revnumber> <date>21 March 2016</date> <authorinitials>ss</"
-"authorinitials> <revremark>development version</revremark>"
+"<revnumber>1.2
6.1</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>development</revremark>"
msgstr ""
-"<revnumber>1.25.1</revnumber> <date>21 de mayo de 2016</date> "
+"<revnumber>1.26.1</revnumber> <date>11 de agosto de 2017</date> "
"<authorinitials>ss</authorinitials> <revremark>versión de desarrollo</"
"revremark>"
#. (itstool) path: revhistory/revision
#: C/index.docbook:89
+#| msgid ""
+#| "<revnumber>1.25.1</revnumber> <date>21 March 2016</date> "
+#| "<authorinitials>ss</authorinitials> <revremark>development version</"
+#| "revremark>"
+msgid ""
+"<revnumber>1.26</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>port all tools from perl/bash to python</"
+"revremark>"
+msgstr ""
+"<revnumber>1.26</revnumber> <date>11 de agosto de 2017</date> "
+"<authorinitials>ss</authorinitials> <revremark>portar todas las herramientas "
+"de perl/bash a python</revremark>"
+
+#. (itstool) path: revhistory/revision
+#: C/index.docbook:95
msgid ""
"<revnumber>1.25</revnumber> <date>21 March 2016</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, test cleanups</revremark>"
"limpieza</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:95
+#: C/index.docbook:101
msgid ""
"<revnumber>1.24</revnumber> <date>29 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fix</revremark>"
"revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:101
+#: C/index.docbook:107
msgid ""
"<revnumber>1.23</revnumber> <date>17 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fix</revremark>"
"revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:107
+#: C/index.docbook:113
msgid ""
"<revnumber>1.22</revnumber> <date>07 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, dropping deprecated features</"
"eliminadas funcionalidades obsoletas</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:113
+#: C/index.docbook:119
msgid ""
"<revnumber>1.21</revnumber> <date>17 Jul 2014</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, dropping deprecated features</"
"eliminadas funcionalidades obsoletas</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:119
+#: C/index.docbook:125
msgid ""
"<revnumber>1.20</revnumber> <date>16 Feb 2014</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, markdown support, style improvements</"
"de marcado, mejoras en los estilos</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:125
+#: C/index.docbook:131
msgid ""
"<revnumber>1.19</revnumber> <date>05 Jun 2013</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes</revremark>"
"revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:131
+#: C/index.docbook:137
msgid ""
"<revnumber>1.18</revnumber> <date>14 Sep 2011</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, speedups, markdown support</revremark>"
"mejoras en la velocidad y soporte de marcado</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:137
+#: C/index.docbook:143
msgid ""
"<revnumber>1.17</revnumber> <date>26 Feb 2011</date> <authorinitials>sk</"
"authorinitials> <revremark>urgent bug fix update</revremark>"
"corrección de error</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:143
+#: C/index.docbook:149
msgid ""
"<revnumber>1.16</revnumber> <date>14 Jan 2011</date> <authorinitials>sk</"
"authorinitials> <revremark>bugfixes, layout improvements</revremark>"
"mejoras en la distribución</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:149
+#: C/index.docbook:155
msgid ""
"<revnumber>1.15</revnumber> <date>21 May 2010</date> <authorinitials>sk</"
"authorinitials> <revremark>bug and regression fixes</revremark>"
"regresiones</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:155
+#: C/index.docbook:161
msgid ""
"<revnumber>1.14</revnumber> <date>28 March 2010</date> <authorinitials>sk</"
"authorinitials> <revremark>bugfixes and performance improvements</revremark>"
"mejoras en el rendimiento</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:161
+#: C/index.docbook:167
msgid ""
"<revnumber>1.13</revnumber> <date>18 December 2009</date> "
"<authorinitials>sk</authorinitials> <revremark>broken tarball update</"
"roto</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:167
+#: C/index.docbook:173
msgid ""
"<revnumber>1.12</revnumber> <date>18 December 2009</date> "
"<authorinitials>sk</authorinitials> <revremark>new tool features and "
"nuevas características</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:173
+#: C/index.docbook:179
msgid ""
"<revnumber>1.11</revnumber> <date>16 November 2008</date> "
"<authorinitials>mal</authorinitials> <revremark>GNOME doc-utils migration</"
"revremark>"
#. (itstool) path: chapter/title
-#: C/index.docbook:186
+#: C/index.docbook:192
msgid "Introduction"
msgstr "Introducción"
#. (itstool) path: chapter/para
-#: C/index.docbook:188
+#: C/index.docbook:194
msgid ""
"This chapter introduces GTK-Doc and gives an overview of what it is and how "
"it is used."
"es y cómo usarlo."
#. (itstool) path: sect1/title
-#: C/index.docbook:194
+#: C/index.docbook:200
msgid "What is GTK-Doc?"
msgstr "¿Qué es GTK-Doc?"
#. (itstool) path: sect1/para
-#: C/index.docbook:196
+#: C/index.docbook:202
msgid ""
"GTK-Doc is used to document C code. It is typically used to document the "
"public API of libraries, such as the GTK+ and GNOME libraries. But it can "
"Pero también se puede usar para documentar código de aplicaciones."
#. (itstool) path: sect1/title
-#: C/index.docbook:204
+#: C/index.docbook:210
msgid "How Does GTK-Doc Work?"
msgstr "¿Cómo funciona GTK-Doc?"
#. (itstool) path: sect1/para
-#: C/index.docbook:206
+#: C/index.docbook:212
msgid ""
"GTK-Doc works by using documentation of functions placed inside the source "
"files in specially-formatted comment blocks, or documentation added to the "
"archivos de cabecera; no produce salida para funciones estáticas)."
#. (itstool) path: sect1/para
-#: C/index.docbook:213
+#: C/index.docbook:219
+#| msgid ""
+#| "GTK-Doc consists of a number of perl scripts, each performing a different "
+#| "step in the process."
msgid ""
-"GTK-Doc consists of a number of perl scripts, each performing a different "
+"GTK-Doc consists of a number of python scripts, each performing a different "
"step in the process."
msgstr ""
-"GTK-Doc consiste en un número de scripts en Perl, cada uno realiza un paso "
+"GTK-Doc consiste en un número de scripts en python, cada uno realiza un paso "
"diferente en el proceso."
#. (itstool) path: sect1/para
-#: C/index.docbook:218
+#: C/index.docbook:224
msgid "There are 5 main steps in the process:"
msgstr "Existen 5 pasos importantes en el proceso:"
#. (itstool) path: listitem/para
-#: C/index.docbook:225
+#: C/index.docbook:231
msgid ""
"<guilabel>Writing the documentation.</guilabel> The author fills in the "
"source files with the documentation for each function, macro, union etc. (In "
"lo que ya no se recomienda)."
#. (itstool) path: listitem/para
-#: C/index.docbook:235
+#: C/index.docbook:241
msgid ""
"<guilabel>Gathering information about the code.</guilabel> "
"<application>gtkdoc-scan</application> scans the header files of the code "
"txt</filename> dentro de <filename><module>-overrides.txt</filename>."
#. (itstool) path: listitem/para
-#: C/index.docbook:252
+#: C/index.docbook:258
msgid ""
"<application>gtkdoc-scangobj</application> can also be used to dynamically "
"query a library about any GObject subclasses it exports. It saves "
"que proporciona."
#. (itstool) path: listitem/para
-#: C/index.docbook:258
+#: C/index.docbook:264
msgid ""
"<application>gtkdoc-scanobj</application> should not be used anymore. It was "
"needed in the past when GObject was still GtkObject inside gtk+."
"necesitó en el pasado, cuando GObject todavía era GtkObject dentro de GTK+."
#. (itstool) path: listitem/para
-#: C/index.docbook:265
+#: C/index.docbook:271
msgid ""
"<guilabel>Generating the XML and HTML/PDF.</guilabel> <application>gtkdoc-"
"mkdb</application> turns the template files into XML files in the <filename "
"obtiene los documentos de los fuentes y los datos obtenidos en introspección."
#. (itstool) path: listitem/para
-#: C/index.docbook:274
+#: C/index.docbook:280
msgid ""
"<application>gtkdoc-mkhtml</application> turns the XML files into HTML files "
"in the <filename class=\"directory\">html/</filename> subdirectory. Likewise "
"paquete>.pdf</filename>."
#. (itstool) path: listitem/para
-#: C/index.docbook:280
+#: C/index.docbook:286
msgid ""
"Files in <filename class=\"directory\">xml/</filename> and <filename class="
"\"directory\">html/</filename> directories are always overwritten. One "
"Nunca se deben editar directamente."
#. (itstool) path: listitem/para
-#: C/index.docbook:288
+#: C/index.docbook:294
msgid ""
"<guilabel>Fixing up cross-references between documents.</guilabel> After "
"installing the HTML files, <application>gtkdoc-fixxref</application> can be "
"esa documentación está instalada)."
#. (itstool) path: sect1/title
-#: C/index.docbook:306
+#: C/index.docbook:312
msgid "Getting GTK-Doc"
msgstr "Obtener GTK-Doc"
#. (itstool) path: sect2/title
-#: C/index.docbook:309
+#: C/index.docbook:315
msgid "Requirements"
msgstr "Requerimientos"
#. (itstool) path: sect2/para
-#: C/index.docbook:310
-msgid "<guilabel>Perl v5</guilabel> - the main scripts are in Perl."
-msgstr "<guilabel>Perl v5</guilabel>: los scripts principales están en Perl."
+#: C/index.docbook:316
+#| msgid "<guilabel>Perl v5</guilabel> - the main scripts are in Perl."
+msgid ""
+"<guilabel>python 2/3</guilabel> - the main scripts are written in python."
+msgstr ""
+"<guilabel>python 2/3</guilabel> - los scripts principales están escritos en "
+"python."
#. (itstool) path: sect2/para
-#: C/index.docbook:313
+#: C/index.docbook:319
msgid ""
"<guilabel>xsltproc</guilabel> - the xslt processor from libxslt <ulink url="
"\"http://xmlsoft.org/XSLT/\" type=\"http\">xmlsoft.org/XSLT/</ulink>"
"\"http://xmlsoft.org/XSLT/\" type=\"http\">xmlsoft.org/XSLT/</ulink>"
#. (itstool) path: sect2/para
-#: C/index.docbook:317
+#: C/index.docbook:323
msgid ""
"<guilabel>docbook-xsl</guilabel> - the docbook xsl stylesheets <ulink url="
"\"http://sourceforge.net/projects/docbook/files/docbook-xsl/\" type=\"http"
"\"http\">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>"
#. (itstool) path: sect2/para
-#: C/index.docbook:321
-msgid "<guilabel>Python</guilabel> - optional - for gtkdoc-depscan"
-msgstr "<guilabel>Python</guilabel>: opcional, para gtkdoc-depscan"
-
-#. (itstool) path: sect2/para
-#: C/index.docbook:324
+#: C/index.docbook:327
msgid ""
"One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> "
"or <guilabel>vim</guilabel> - optional - used for syntax highlighting of "
"los ejemplos."
#. (itstool) path: sect1/title
-#: C/index.docbook:332
+#: C/index.docbook:335
msgid "About GTK-Doc"
msgstr "Acerca de GTK-Doc"
#. (itstool) path: sect1/para
-#: C/index.docbook:334 C/index.docbook:348
+#: C/index.docbook:337 C/index.docbook:351
msgid "(FIXME)"
msgstr "(ARRÉGLAME)"
#. (itstool) path: sect1/para
-#: C/index.docbook:338
+#: C/index.docbook:341
msgid ""
"(History, authors, web pages, mailing list, license, future plans, "
"comparison with other similar systems.)"
"futuros, comparación con otros sistemas similares.)"
#. (itstool) path: sect1/title
-#: C/index.docbook:346
+#: C/index.docbook:349
msgid "About this Manual"
msgstr "Acerca de este manual"
#. (itstool) path: sect1/para
-#: C/index.docbook:352
+#: C/index.docbook:355
msgid "(who it is meant for, where you can get it, license)"
msgstr "(a quién está dirigido, dónde puede obtenerse, licencia)"
#. (itstool) path: chapter/title
-#: C/index.docbook:361
+#: C/index.docbook:364
msgid "Setting up your project"
msgstr "Configurando su proyecto"
#. (itstool) path: chapter/para
-#: C/index.docbook:363
+#: C/index.docbook:366
msgid ""
"The next sections describe what steps to perform to integrate GTK-Doc into "
"your project. Theses sections assume we work on a project called 'meep'. "
"construcción diferente."
#. (itstool) path: sect1/title
-#: C/index.docbook:374
+#: C/index.docbook:377
msgid "Setting up a skeleton documentation"
msgstr "Configurar el esquema de la documentación"
#. (itstool) path: sect1/para
-#: C/index.docbook:376
+#: C/index.docbook:379
msgid ""
"Under your top-level project directory create folders called docs/reference "
"(this way you can also have docs/help for end-user documentation). It is "
"Para paquetes con una sola biblioteca este paso no es necesario."
#. (itstool) path: example/title
-#: C/index.docbook:385
+#: C/index.docbook:388
msgid "Example directory structure"
msgstr "Ejemplo de estructura de carpetas"
#. (itstool) path: example/programlisting
-#: C/index.docbook:386
+#: C/index.docbook:389
#, no-wrap
msgid ""
"\n"
" meeper/\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:383
+#: C/index.docbook:386
msgid "This can then look as shown below: <_:example-1/>"
msgstr "Esto después aparecerá como se muestra debajo: <_:example-1/>"
#. (itstool) path: sect1/title
#. (itstool) path: example/title
-#: C/index.docbook:401 C/index.docbook:408
+#: C/index.docbook:404 C/index.docbook:411
msgid "Integration with autoconf"
msgstr "Integración con autoconf"
#. (itstool) path: sect1/para
-#: C/index.docbook:403
+#: C/index.docbook:406
msgid ""
"Very easy! Just add one line to your <filename>configure.ac</filename> "
"script."
"filename>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:409
+#: C/index.docbook:412
#, no-wrap
msgid ""
"\n"
"GTK_DOC_CHECK([1.14],[--flavour no-tmpl])\n"
#. (itstool) path: example/title
-#: C/index.docbook:421
+#: C/index.docbook:424
msgid "Keep gtk-doc optional"
msgstr "Mantener gtk-doc como opcional"
#. (itstool) path: example/programlisting
-#: C/index.docbook:422
+#: C/index.docbook:425
#, no-wrap
msgid ""
"\n"
"])\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:416
+#: C/index.docbook:419
msgid ""
"This will require all developers to have gtk-doc installed. If it is okay "
"for your project to have optional api-doc build setup, you can solve this as "
"<_:example-1/>"
#. (itstool) path: sect1/para
-#: C/index.docbook:433
+#: C/index.docbook:436
msgid ""
"The first argument is used to check for the gtkdocversion at configure time. "
"The 2nd, optional argument is used by <application>gtkdocize</application>. "
"symbol> también añade diversas opciones de configuración:"
#. (itstool) path: listitem/para
-#: C/index.docbook:439
+#: C/index.docbook:442
msgid "--with-html-dir=PATH : path to installed docs"
msgstr "--with-html-dir=RUTA: ruta a los documentos instalados"
#. (itstool) path: listitem/para
-#: C/index.docbook:440
+#: C/index.docbook:443
msgid "--enable-gtk-doc : use gtk-doc to build documentation [default=no]"
msgstr ""
"--enable-gtk-doc: usar gtk-doc para construir la documentación "
"[predeterminado=no]"
#. (itstool) path: listitem/para
-#: C/index.docbook:441
+#: C/index.docbook:444
msgid ""
"--enable-gtk-doc-html : build documentation in html format [default=yes]"
msgstr ""
"[predeterminado=sí]"
#. (itstool) path: listitem/para
-#: C/index.docbook:442
+#: C/index.docbook:445
msgid "--enable-gtk-doc-pdf : build documentation in pdf format [default=no]"
msgstr ""
"--enable-gtk-doc: usar gtk-doc para construir la documentación "
"[predeterminado=no]"
#. (itstool) path: important/para
-#: C/index.docbook:446
+#: C/index.docbook:449
msgid ""
"GTK-Doc is disabled by default! Remember to pass the option <option>'--"
"enable-gtk-doc'</option> to the next <filename>configure</filename> run. "
"desarrolladores)."
#. (itstool) path: sect1/para
-#: C/index.docbook:454
-#| msgid ""
-#| "Furthermore it is recommended that you have the following line inside you "
-#| "<filename>configure.ac</filename> script. This allows "
-#| "<application>gtkdocize</application> to automatically copy the macro "
-#| "definition for <function>GTK_DOC_CHECK</function> to your project."
+#: C/index.docbook:457
msgid ""
"Furthermore it is recommended that you have the following line inside your "
"<filename>configure.ac</filename> script. This allows "
"<function>GTK_DOC_CHECK</function> a su proyecto."
#. (itstool) path: example/title
-#: C/index.docbook:462
+#: C/index.docbook:465
msgid "Preparation for gtkdocize"
msgstr "Preparación para gtkdocize"
#. (itstool) path: example/programlisting
-#: C/index.docbook:463
+#: C/index.docbook:466
#, no-wrap
msgid ""
"\n"
"AC_CONFIG_MACRO_DIR(m4)\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:468
+#: C/index.docbook:471
msgid ""
"After all changes to <filename>configure.ac</filename> are made, update the "
"<filename>configure</filename> file. This can be done by re-running "
"volviendo a ejecutar <code>autoreconf -i</code> o <code>autogen.sh</code>."
#. (itstool) path: sect1/title
-#: C/index.docbook:476
+#: C/index.docbook:479
msgid "Integration with automake"
msgstr "Integración con automake"
#. (itstool) path: sect1/para
-#: C/index.docbook:478
+#: C/index.docbook:481
msgid ""
"First copy the <filename>Makefile.am</filename> from the <filename class="
"\"directory\">examples</filename> sub directory of the <ulink url=\"https://"
"repítalo para cada uno de ellos."
#. (itstool) path: sect1/para
-#: C/index.docbook:489
+#: C/index.docbook:492
msgid ""
"The next step is to edit the settings inside the <filename>Makefile.am</"
"filename>. All the settings have a comment above that describes their "
"soportan <option>--help</option> para listar los parámetros que soportan."
#. (itstool) path: sect1/title
-#: C/index.docbook:503
+#: C/index.docbook:506
msgid "Integration with autogen"
msgstr "Integración con autogen"
#. (itstool) path: sect1/para
-#: C/index.docbook:505
+#: C/index.docbook:508
msgid ""
"Most projects will have an <filename>autogen.sh</filename> script to setup "
"the build infrastructure after a checkout from version control system (such "
"automake o autoconf."
#. (itstool) path: example/title
-#: C/index.docbook:514
+#: C/index.docbook:517
msgid "Running gtkdocize from autogen.sh"
msgstr "Ejecutar gtkdocize desde autogen.sh"
#. (itstool) path: example/programlisting
-#: C/index.docbook:515
+#: C/index.docbook:518
#, no-wrap
msgid ""
"\n"
"gtkdocize || exit 1\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:521
+#: C/index.docbook:524
msgid ""
"When running <application>gtkdocize</application> it copies <filename>gtk-"
"doc.make</filename> to your project root (or any directory specified by the "
"<application>gtkdocize</application>."
#. (itstool) path: sect1/para
-#: C/index.docbook:530
+#: C/index.docbook:533
msgid ""
"Historically GTK-Doc was generating template files where developers entered "
"the docs. This turned out to be not so good (e.g. the need for having "
#. (itstool) path: sect1/title
#. (itstool) path: example/title
-#: C/index.docbook:547 C/index.docbook:564
+#: C/index.docbook:550 C/index.docbook:567
msgid "Running the doc build"
msgstr "Ejecutar la construcción de la documentación"
#. (itstool) path: sect1/para
-#: C/index.docbook:549
+#: C/index.docbook:552
msgid ""
"After the previous steps it's time to run the build. First we need to rerun "
"<filename>autogen.sh</filename>. If this script runs configure for you, then "
"<filename>configure</filename> con esta opción."
#. (itstool) path: sect1/para
-#: C/index.docbook:556
+#: C/index.docbook:559
msgid ""
"The first make run generates several additional files in the doc-"
"directories. The important ones are: <filename><package>.types</"
"pasado), <filename><paquete>-sections.txt</filename>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:565
+#: C/index.docbook:568
#, no-wrap
msgid ""
"\n"
"make\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:571
+#: C/index.docbook:574
msgid ""
"Now you can point your browser to <filename>docs/reference/<package>/"
"index.html</filename>. Yes, it's a bit disappointing still. But hang-on, "
"información."
#. (itstool) path: sect1/title
-#: C/index.docbook:579
+#: C/index.docbook:582
msgid "Integration with version control systems"
msgstr "Integración con los sistemas de control de versiones"
#. (itstool) path: sect1/para
-#: C/index.docbook:581
+#: C/index.docbook:584
msgid ""
"As a rule of thumb, it's the files you edit which should go under version "
"control. For typical projects it's these files: <filename><package>."
"txt</filename>, <filename>Makefile.am</filename>."
#. (itstool) path: sect1/para
-#: C/index.docbook:589
+#: C/index.docbook:592
msgid ""
"Files in the <filename>xml/</filename> and <filename>html/</filename> "
"directories should not go under version control. Neither should any of the "
"los archivos <filename>.stamp</filename>."
#. (itstool) path: sect1/title
-#: C/index.docbook:597
+#: C/index.docbook:600
msgid "Integration with plain makefiles or other build systems"
msgstr "Integración con makefiles u otros sistemas de construcción"
#. (itstool) path: sect1/para
-#: C/index.docbook:599
+#: C/index.docbook:602
msgid ""
"In the case one does not want to use automake and therefore <filename>gtk-"
"doc.mak</filename> one will need to call the gtkdoc tools in the right order "
"makefiles propios (o en otras herramientas de construcción)."
#. (itstool) path: example/title
-#: C/index.docbook:606
+#: C/index.docbook:609
msgid "Documentation build steps"
msgstr "Pasos de construcción de la documentación"
#. (itstool) path: example/programlisting
-#: C/index.docbook:607
+#: C/index.docbook:610
#, no-wrap
msgid ""
"\n"
"gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:621
+#: C/index.docbook:624
msgid ""
"One will need to look at the <filename>Makefile.am</filename> and "
"<filename>gtk-doc.mak</filename> to pick the extra options needed."
"doc.mak</filename> para elegir las opciones adicionales necesarias."
#. (itstool) path: sect1/title
-#: C/index.docbook:628
+#: C/index.docbook:631
msgid "Integration with CMake build systems"
msgstr "Integración con sistemas de construcción CMake"
#. (itstool) path: sect1/para
-#: C/index.docbook:630
+#: C/index.docbook:633
msgid ""
"GTK-Doc now provides a <filename>GtkDocConfig.cmake</filename> module (and "
"the corresponding <filename>GtkDocConfigVersion.cmake</filename> module). "
"filename>."
#. (itstool) path: example/title
-#: C/index.docbook:640
+#: C/index.docbook:643
msgid "Example of using GTK-Doc from CMake"
msgstr "Ejeplo de uso de GTK-Doc desde CMake"
#. (itstool) path: example/programlisting
-#: C/index.docbook:641
+#: C/index.docbook:644
#, no-wrap
msgid ""
"\n"
" DESTINATION ${CMAKE_INSTALL_DOCDIR})\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:638
+#: C/index.docbook:641
msgid "The following example shows how to use this command. <_:example-1/>"
msgstr "El siguiente ejemplo muestra cómo usar este comando. <_:example-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:666
+#: C/index.docbook:669
msgid "Documenting the code"
msgstr "Documentar el código"
#. (itstool) path: chapter/para
-#: C/index.docbook:668
+#: C/index.docbook:671
msgid ""
"GTK-Doc uses source code comment with a special syntax for code "
"documentation. Further it retrieves information about your project structure "
"acerca de la sintaxis de los comentarios."
#. (itstool) path: note/title
-#: C/index.docbook:676
+#: C/index.docbook:679
msgid "Documentation placement"
msgstr "Ubicación de la documentación"
#. (itstool) path: note/para
-#: C/index.docbook:677
+#: C/index.docbook:680
msgid ""
"In the past most documentation had to be filled into files residing inside "
"the <filename>tmpl</filename> directory. This has the disadvantages that the "
"conflictos con los sistemas de control de versiones."
#. (itstool) path: note/para
-#: C/index.docbook:683
+#: C/index.docbook:686
msgid ""
"The avoid the aforementioned problems we suggest putting the documentation "
"inside the sources. This manual will only describe this way of documenting "
"documentar el código."
#. (itstool) path: example/title
-#: C/index.docbook:694 C/index.docbook:720
+#: C/index.docbook:697 C/index.docbook:723
msgid "GTK-Doc comment block"
msgstr "Bloque de comentario de GTK-Doc"
#. (itstool) path: example/programlisting
-#: C/index.docbook:695
+#: C/index.docbook:698
#, no-wrap
msgid ""
"\n"
"#endif\n"
#. (itstool) path: chapter/para
-#: C/index.docbook:690
+#: C/index.docbook:693
msgid ""
"The scanner can handle the majority of C headers fine. In the case of "
"receiving warnings from the scanner that look like a special case, one can "
"GTK-Doc que los omita. <_:example-1/>"
#. (itstool) path: note/title
-#: C/index.docbook:704
+#: C/index.docbook:707
msgid "Limitations"
msgstr "Limitaciones"
#. (itstool) path: note/para
-#: C/index.docbook:705
+#: C/index.docbook:708
msgid ""
"Note, that GTK-Doc's supports <code>#ifndef(__GTK_DOC_IGNORE__)</code> but "
"not <code>#if !defined(__GTK_DOC_IGNORE__)</code> or other combinations."
"pero <code>#if !defined(__GTK_DOC_IGNORE__)</code> u otras combinaciones."
#. (itstool) path: sect1/title
-#: C/index.docbook:715
+#: C/index.docbook:718
msgid "Documentation comments"
msgstr "Comentarios de la documentación"
#. (itstool) path: example/programlisting
-#: C/index.docbook:721
+#: C/index.docbook:724
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:717
+#: C/index.docbook:720
msgid ""
"A multiline comment that starts with an additional '*' marks a documentation "
"block that will be processed by the GTK-Doc tools. <_:example-1/>"
"bloque de documentación que GTK-Doc tools procesarán. <_:example-1/>"
#. (itstool) path: sect1/para
-#: C/index.docbook:730
+#: C/index.docbook:733
msgid ""
"The 'identifier' is one line with the name of the item the comment is "
"related to. The syntax differs a little depending on the item. (TODO add "
"hacer: añadir una tabla mostrando los identificadores)"
#. (itstool) path: sect1/para
-#: C/index.docbook:736
+#: C/index.docbook:739
msgid ""
"The 'documentation' block is also different for each symbol type. Symbol "
"types that get parameters such as functions or macros have the parameter "
"espacio). Esto es útil para texto preformateado (listados de código)."
#. (itstool) path: listitem/para
-#: C/index.docbook:753
+#: C/index.docbook:756
msgid ""
"What it is: The name for a class or function can sometimes be misleading for "
"people coming from a different background."
"personas que provengan de otros entornos."
#. (itstool) path: listitem/para
-#: C/index.docbook:759
+#: C/index.docbook:762
msgid ""
"What it does: Tell about common uses. Put it in relation with the other API."
msgstr "Qué hace: indique los usos comunes, en relación con las otras API."
#. (itstool) path: tip/para
-#: C/index.docbook:749
+#: C/index.docbook:752
msgid "When documenting code, describe two aspects: <_:itemizedlist-1/>"
msgstr "Al documentar código, describa dos aspectos: <_:itemizedlist-1/>"
#. (itstool) path: listitem/para
-#: C/index.docbook:774
+#: C/index.docbook:777
msgid "Use function() to refer to functions or macros which take arguments."
msgstr ""
"Use función() para referirse a funciones o macros que toman argumentos."
#. (itstool) path: listitem/para
-#: C/index.docbook:779
+#: C/index.docbook:782
msgid ""
"Use @param to refer to parameters. Also use this when referring to "
"parameters of other functions, related to the one being described."
"parámetros de otras funciones, relacionados al que se describe."
#. (itstool) path: listitem/para
-#: C/index.docbook:785
+#: C/index.docbook:788
msgid "Use %constant to refer to a constant, e.g. %G_TRAVERSE_LEAFS."
msgstr "Use %constant para referirse a una constante, ej: %G_TRAVERSE_LEAFS."
#. (itstool) path: listitem/para
-#: C/index.docbook:790
+#: C/index.docbook:793
msgid ""
"Use #symbol to refer to other types of symbol, e.g. structs and enums and "
"macros which don't take arguments."
"estructuras, enumeraciones y macros que no toman argumentos."
#. (itstool) path: listitem/para
-#: C/index.docbook:796
+#: C/index.docbook:799
msgid "Use #Object::signal to refer to a GObject signal."
msgstr "Use #Object::signal para referirse a una señal de GObject."
#. (itstool) path: listitem/para
-#: C/index.docbook:801
+#: C/index.docbook:804
msgid "Use #Object:property to refer to a GObject property."
msgstr "Use #Object:property para referirse a una propiedad de GObject."
#. (itstool) path: listitem/para
-#: C/index.docbook:806
+#: C/index.docbook:809
msgid ""
"Use #Struct.field to refer to a field inside a structure and #GObjectClass."
"foo_bar() to refer to a vmethod."
"#GObjectClass.foo_bar() para referirse a un vmethod."
#. (itstool) path: sect1/para
-#: C/index.docbook:768
+#: C/index.docbook:771
msgid ""
"One advantage of hyper-text over plain-text is the ability to have links in "
"the document. Writing the correct markup for a link can be tedious though. "
"itemizedlist-1/>"
#. (itstool) path: tip/para
-#: C/index.docbook:815
+#: C/index.docbook:818
msgid ""
"If you need to use the special characters '<', '>', '()', '@', '%', or "
"'#' in your documentation without GTK-Doc changing them you can use the XML "
"doble «\\»."
#. (itstool) path: sect1/para
-#: C/index.docbook:824
+#: C/index.docbook:827
msgid ""
"DocBook can do more than just links. One can also have lists, examples, "
"headings, and images. As of version 1.20, the preferred way is to use a "
"elementos de una lista aparecerán como líneas que empiezan con un guión."
#. (itstool) path: sect1/para
-#: C/index.docbook:835
+#: C/index.docbook:838
msgid ""
"While markdown is now preferred one can mix both. One limitation here is "
"that one can use docbook xml within markdown, but markdown within docbook "
"xml no está soportado."
#. (itstool) path: sect1/para
-#: C/index.docbook:841
+#: C/index.docbook:844
msgid ""
"In older GTK-Doc releases, if you need support for additional formatting, "
"you would need to enable the usage of docbook XML tags inside doc-comments "
"<filename>Makefile.am</filename>."
#. (itstool) path: example/title
-#: C/index.docbook:850
+#: C/index.docbook:853
msgid "GTK-Doc comment block using Markdown"
msgstr "Bloque de comentario de GTK-Doc usando marcado"
#. (itstool) path: example/programlisting
-#: C/index.docbook:851
+#: C/index.docbook:854
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:890
+#: C/index.docbook:893
msgid ""
"More examples of what markdown tags are supported can be found in the <ulink "
"url=\"https://wiki.gnome.org/Projects/GTK%2B/DocumentationSyntax/Markdown"
"GTK+</ulink>."
#. (itstool) path: tip/para
-#: C/index.docbook:896
+#: C/index.docbook:899
msgid ""
"As already mentioned earlier GTK-Doc is for documenting public API. Thus one "
"cannot write documentation for static symbols. Nevertheless it is good to "
"secciones."
#. (itstool) path: sect1/title
-#: C/index.docbook:910
+#: C/index.docbook:913
msgid "Documenting sections"
msgstr "Documentar secciones"
#. (itstool) path: sect1/para
-#: C/index.docbook:912
+#: C/index.docbook:915
msgid ""
"Each section of the documentation contains information about one class or "
"module. To introduce the component one can write a section block. The short "
"los campos @ son opcionales."
#. (itstool) path: example/title
-#: C/index.docbook:920
+#: C/index.docbook:923
msgid "Section comment block"
msgstr "Bloque de comentarios en una sección"
#. (itstool) path: example/programlisting
-#: C/index.docbook:921
+#: C/index.docbook:924
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:940
+#: C/index.docbook:943
msgid "SECTION:<name>"
msgstr "SECCIÓN <nombre>"
#. (itstool) path: listitem/para
-#: C/index.docbook:942
-#| msgid ""
-#| "The name links the section documentation to the respective part in the "
-#| "<filename><package>-sections.txt</filename> file. The name give "
-#| "here should match the <FILE> tag in the <filename><package>-"
-#| "sections.txt</filename> file."
+#: C/index.docbook:945
msgid ""
"The name links the section documentation to the respective part in the "
"<filename><package>-sections.txt</filename> file. The name given here "
"archivo <filename><paquete>-sections.txt</filename>."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:951
+#: C/index.docbook:954
msgid "@short_description"
msgstr "@short_description"
#. (itstool) path: listitem/para
-#: C/index.docbook:953
+#: C/index.docbook:956
msgid ""
"A one line description of the section, that later will appear after the "
"links in the TOC and at the top of the section page."
"TOC y en la página de la sección."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:960
+#: C/index.docbook:963
msgid "@title"
msgstr "@title"
#. (itstool) path: listitem/para
-#: C/index.docbook:962
+#: C/index.docbook:965
msgid ""
"The section title defaults to <name> from the SECTION declaration. It "
"can be overridden with the @title field."
"declaración SECTION. Se puede sobrescribir con el campo @title."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:969
+#: C/index.docbook:972
msgid "@section_id"
msgstr "@section_id"
#. (itstool) path: listitem/para
-#: C/index.docbook:971
+#: C/index.docbook:974
msgid ""
"Overrides the use of title as a section identifier. For GObjects the <"
"title> is used as a section_id and for other sections it is <"
"para otra sección es <MÓDULO>-<title>."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:979
+#: C/index.docbook:982
msgid "@see_also"
msgstr "@see_also"
#. (itstool) path: listitem/para
-#: C/index.docbook:981
+#: C/index.docbook:984
msgid "A list of symbols that are related to this section."
msgstr "Una lista de símbolos relacionados con esta sección."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:987
+#: C/index.docbook:990
msgid "@stability"
msgstr "@stability"
#. (itstool) path: listitem/para
-#: C/index.docbook:994
+#: C/index.docbook:997
msgid ""
"Stable - The intention of a Stable interface is to enable arbitrary third "
"parties to develop applications to these interfaces, release them, and have "
"de haberlos habrá buenas razones para ello."
#. (itstool) path: listitem/para
-#: C/index.docbook:1006
+#: C/index.docbook:1009
msgid ""
"Unstable - Unstable interfaces are experimental or transitional. They are "
"typically used to give outside developers early access to new or rapidly "
"publicación menor a la siguiente."
#. (itstool) path: listitem/para
-#: C/index.docbook:1018
+#: C/index.docbook:1021
msgid ""
"Private - An interface that can be used within the GNOME stack itself, but "
"that is not documented for end-users. Such functions should only be used in "
"deberían usar de formas especificadas y documentadas."
#. (itstool) path: listitem/para
-#: C/index.docbook:1027
+#: C/index.docbook:1030
msgid ""
"Internal - An interface that is internal to a module and does not require "
"end-user documentation. Functions that are undocumented are assumed to be "
"son internas."
#. (itstool) path: listitem/para
-#: C/index.docbook:989
+#: C/index.docbook:992
msgid ""
"An informal description of the stability level this API has. We recommend "
"the use of one of these terms: <_:itemizedlist-1/>"
"recomienda el uso de uno de estos términos: <_:itemizedlist-1/>"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1039
+#: C/index.docbook:1042
msgid "@include"
msgstr "@include"
#. (itstool) path: listitem/para
-#: C/index.docbook:1041
+#: C/index.docbook:1044
msgid ""
"The <literal>#include</literal> files to show in the section synopsis (a "
"comma separated list), overriding the global value from the <link linkend="
"línea de comandos. Este elemento es opcional."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1050
+#: C/index.docbook:1053
msgid "@image"
msgstr "@image"
#. (itstool) path: listitem/para
-#: C/index.docbook:1052
+#: C/index.docbook:1055
msgid ""
"The image to display at the top of the reference page for this section. This "
"will often be some sort of a diagram to illustrate the visual appearance of "
"Este elemento es opcional."
#. (itstool) path: tip/para
-#: C/index.docbook:1063
+#: C/index.docbook:1066
msgid ""
"To avoid unnecessary recompilation after doc-changes put the section docs "
"into the c-source where possible."
"sea posible."
#. (itstool) path: sect1/title
-#: C/index.docbook:1072
+#: C/index.docbook:1075
msgid "Documenting symbols"
msgstr "Documentar símbolos"
#. (itstool) path: sect1/para
-#: C/index.docbook:1074
+#: C/index.docbook:1077
msgid ""
"Each symbol (function, macro, struct, enum, signal and property) is "
"documented in a separate block. The block is best placed close to the "
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1082 C/index.docbook:1148
+#: C/index.docbook:1085 C/index.docbook:1151
msgid "General tags"
msgstr "Etiquetas generales"
#. (itstool) path: sect2/para
-#: C/index.docbook:1084
+#: C/index.docbook:1087
msgid ""
"You can add versioning information to all documentation elements to tell "
"when an API was introduced, or when it was deprecated."
"obsoleta."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1089
+#: C/index.docbook:1092
msgid "Versioning Tags"
msgstr "Versionado de etiquetas"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1090
+#: C/index.docbook:1093
msgid "Since:"
msgstr "Desde:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1092
+#: C/index.docbook:1095
msgid "Description since which version of the code the API is available."
msgstr "Descripción desde qué versión del código está disponible la API."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1097
+#: C/index.docbook:1100
msgid "Deprecated:"
msgstr "Obsoleto:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1099
+#: C/index.docbook:1102
msgid ""
"Paragraph denoting that this function should no be used anymore. The "
"description should point the reader to the new API."
"debería informar al lector de la nueva API."
#. (itstool) path: sect2/para
-#: C/index.docbook:1107
+#: C/index.docbook:1110
msgid ""
"You can also add stability information to all documentation elements to "
"indicate whether API stability is guaranteed for them for all future minor "
"todas las versiones menores futuras del proyecto."
#. (itstool) path: sect2/para
-#: C/index.docbook:1113
+#: C/index.docbook:1116
msgid ""
"The default stability level for all documentation elements can be set by "
"passing the <option>--default-stability</option> argument to "
"siguientes valores."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1119
+#: C/index.docbook:1122
msgid "Stability Tags"
msgstr "Etiquetas de estabilidad"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1120
+#: C/index.docbook:1123
msgid "Stability: Stable"
msgstr "Estabilidad: estable"
#. (itstool) path: listitem/para
-#: C/index.docbook:1122
+#: C/index.docbook:1125
msgid ""
"Mark the element as stable. This is for public APIs which are guaranteed to "
"remain stable for all future minor releases of the project."
"proyecto."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1129
+#: C/index.docbook:1132
msgid "Stability: Unstable"
msgstr "Estabilidad: inestable"
#. (itstool) path: listitem/para
-#: C/index.docbook:1131
+#: C/index.docbook:1134
msgid ""
"Mark the element as unstable. This is for public APIs which are released as "
"a preview before being stabilised."
"publican como versión previa antes de estabilizarse."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1137
+#: C/index.docbook:1140
msgid "Stability: Private"
msgstr "Estabilidad: privado"
#. (itstool) path: listitem/para
-#: C/index.docbook:1139
+#: C/index.docbook:1142
msgid ""
"Mark the element as private. This is for interfaces which can be used by "
"tightly coupled modules, but not by arbitrary third parties."
"en módulos fuertemente acoplados, pero no en terceras partes aleatorias."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1149
+#: C/index.docbook:1152
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1169 C/index.docbook:1179
+#: C/index.docbook:1172 C/index.docbook:1182
msgid "Annotations"
msgstr "Anotaciones"
#. (itstool) path: sect2/para
-#: C/index.docbook:1171
+#: C/index.docbook:1174
msgid ""
"Documentation blocks can contain annotation-tags. These tags will be "
"rendered with tooltips describing their meaning. The tags are used by "
"type=\"http\">el wiki</ulink>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1180
+#: C/index.docbook:1183
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1201 C/index.docbook:1230
+#: C/index.docbook:1204 C/index.docbook:1233
msgid "Function comment block"
msgstr "Bloque de comentario de función"
#. (itstool) path: listitem/para
-#: C/index.docbook:1207
+#: C/index.docbook:1210
msgid ""
"Document whether returned objects, lists, strings, etc, should be freed/"
"unrefed/released."
"debería liberarse/desreferenciarse/etc."
#. (itstool) path: listitem/para
-#: C/index.docbook:1213
+#: C/index.docbook:1216
msgid "Document whether parameters can be NULL, and what happens if they are."
msgstr ""
"El documento, dependiendo de si sus parámetros pueden ser nulos, y qué "
"sucede si lo son."
#. (itstool) path: listitem/para
-#: C/index.docbook:1218
+#: C/index.docbook:1221
msgid ""
"Mention interesting pre-conditions and post-conditions where appropriate."
msgstr ""
"Mencionar precondiciones y postcondiciones interesantes donde sea apropiado."
#. (itstool) path: sect2/para
-#: C/index.docbook:1203 C/index.docbook:1289
+#: C/index.docbook:1206 C/index.docbook:1292
msgid "Please remember to: <_:itemizedlist-1/>"
msgstr "Recuerde: <_:itemizedlist-1/>"
#. (itstool) path: sect2/para
-#: C/index.docbook:1225
+#: C/index.docbook:1228
msgid ""
"Gtk-doc assumes all symbols (macros, functions) starting with '_' are "
"private. They are treated like static functions."
"«_» son privados. Se tratan como funciones estáticas."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1231
+#: C/index.docbook:1234
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: variablelist/title
-#: C/index.docbook:1252
+#: C/index.docbook:1255
msgid "Function tags"
msgstr "Etiquetas de funciones"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1253 C/index.docbook:1460
+#: C/index.docbook:1256 C/index.docbook:1463
msgid "Returns:"
msgstr "Devuelve:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1255
+#: C/index.docbook:1258
msgid "Paragraph describing the returned result."
msgstr "Párrafo que describe el resultado devuelto."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1260
+#: C/index.docbook:1263
msgid "@...:"
msgstr "@...:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1262
+#: C/index.docbook:1265
msgid ""
"In case the function has variadic arguments, you should use this tag "
"(@Varargs: does also work for historic reasons)."
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1272 C/index.docbook:1274
+#: C/index.docbook:1275 C/index.docbook:1277
msgid "Property comment block"
msgstr "Bloque de comentario de propiedad"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1275
+#: C/index.docbook:1278
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1287 C/index.docbook:1306
+#: C/index.docbook:1290 C/index.docbook:1309
msgid "Signal comment block"
msgstr "Bloque de comentario de señal"
#. (itstool) path: listitem/para
-#: C/index.docbook:1293
+#: C/index.docbook:1296
msgid ""
"Document when the signal is emitted and whether it is emitted before or "
"after other signals."
"otras señales."
#. (itstool) path: listitem/para
-#: C/index.docbook:1299
+#: C/index.docbook:1302
msgid "Document what an application might do in the signal handler."
msgstr "Documentar qué aplicación debe gestionar las señales."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1307
+#: C/index.docbook:1310
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1324 C/index.docbook:1325
+#: C/index.docbook:1327 C/index.docbook:1328
msgid "Struct comment block"
msgstr "Bloque de comentario de estructura"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1326
+#: C/index.docbook:1329
#, no-wrap
msgid ""
"\n"
"} FooWidget;\n"
#. (itstool) path: sect2/para
-#: C/index.docbook:1341
+#: C/index.docbook:1344
msgid ""
"Use <code>/*< private >*/</code> before the private struct fields you "
"want to hide. Use <code>/*< public >*/</code> for the reverse "
"revertir el comportamiento anterior."
#. (itstool) path: sect2/para
-#: C/index.docbook:1347
+#: C/index.docbook:1350
msgid ""
"If the first field is \"g_iface\", \"parent_instance\" or \"parent_class\" "
"it will be considered private automatically and doesn't need to be mentioned "
"bloque de comentario."
#. (itstool) path: sect2/para
-#: C/index.docbook:1353
+#: C/index.docbook:1356
msgid ""
"Struct comment blocks can also be used for GObjects and GObjectClasses. It "
"is usually a good idea to add a comment block for a class, if it has "
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1365 C/index.docbook:1366
+#: C/index.docbook:1368 C/index.docbook:1369
msgid "Enum comment block"
msgstr "Enumerar bloques de comentarios"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1367
+#: C/index.docbook:1370
#, no-wrap
msgid ""
"\n"
"} Something;\n"
#. (itstool) path: sect2/para
-#: C/index.docbook:1384
+#: C/index.docbook:1387
msgid ""
"Use <code>/*< private >*/</code> before the private enum values you "
"want to hide. Use <code>/*< public >*/</code> for the reverse "
"comportamiento anterior."
#. (itstool) path: sect1/title
-#: C/index.docbook:1395
+#: C/index.docbook:1398
msgid "Inline program documentation"
msgstr "Documentación en línea del programa"
#. (itstool) path: sect1/para
-#: C/index.docbook:1396
+#: C/index.docbook:1399
msgid ""
"You can document programs and their commandline interface using inline "
"documentation."
"documentación en línea."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1402
+#: C/index.docbook:1405
msgid "Tags"
msgstr "Etiquetas"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1404
+#: C/index.docbook:1407
msgid "PROGRAM"
msgstr "PROGRAM"
#. (itstool) path: listitem/para
-#: C/index.docbook:1407
+#: C/index.docbook:1410
msgid "Defines the start of a program documentation."
msgstr "Define el inicio de la documentación de un programa."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1414
+#: C/index.docbook:1417
msgid "@short_description:"
msgstr "@short_description:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1416
+#: C/index.docbook:1419
msgid "Defines a short description of the program. (Optional)"
msgstr "Define una descripción corta del programa. (Opcional)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1423
+#: C/index.docbook:1426
msgid "@synopsis:"
msgstr "@synopsis:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1425
+#: C/index.docbook:1428
msgid ""
"Defines the arguments, or list of arguments that the program can take. "
"(Optional)"
"(Opcional)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1433
+#: C/index.docbook:1436
msgid "@see_also:"
msgstr "@see_also:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1435
+#: C/index.docbook:1438
msgid "See Also manual page section. (Optional)"
msgstr "Página del manual Ver también. (Opcional)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1442
+#: C/index.docbook:1445
msgid "@arg:"
msgstr "@arg:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1444
+#: C/index.docbook:1447
msgid "Argument(s) passed to the program and their description. (Optional)"
msgstr "Argumentos pasados al programa y su descripción. (Opcional)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1451
+#: C/index.docbook:1454
msgid "Description:"
msgstr "Description:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1453
+#: C/index.docbook:1456
msgid "A longer description of the program."
msgstr "Una descripción más larga del programa."
#. (itstool) path: listitem/para
-#: C/index.docbook:1462
+#: C/index.docbook:1465
msgid "Specificy what value(s) the program returns. (Optional)"
msgstr "Especifique qué valores devuelve el programa. (Opcional)"
#. (itstool) path: sect2/title
-#: C/index.docbook:1471
+#: C/index.docbook:1474
msgid "Example of program documentation."
msgstr "Ejemplo de documentación de un programa."
#. (itstool) path: example/title
-#: C/index.docbook:1472
+#: C/index.docbook:1475
msgid "Program documentation block"
msgstr "Bloque de documentación del programa"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1473
+#: C/index.docbook:1476
#, no-wrap
msgid ""
"\n"
"}\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:1499
+#: C/index.docbook:1502
msgid "Useful DocBook tags"
msgstr "Etiquetas DocBook útiles"
#. (itstool) path: sect1/para
-#: C/index.docbook:1501
+#: C/index.docbook:1504
msgid ""
"Here are some DocBook tags which are most useful when documenting the code."
msgstr ""
"Aquí están varias etiquetas de DocBook muy útiles al documentar código."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1510
+#: C/index.docbook:1513
#, no-wrap
msgid ""
"\n"
"<link linkend=\"glib-Hash-Tables\">Hash Tables</link>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1506
+#: C/index.docbook:1509
msgid ""
"To link to another section in the GTK docs: <_:informalexample-1/> The "
"linkend is the SGML/XML id on the top item of the page you want to link to. "
"ajustarse a SGML/XML."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1523
+#: C/index.docbook:1526
#, no-wrap
msgid ""
"\n"
"<function>...</function>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1520
+#: C/index.docbook:1523
msgid ""
"To refer to an external function, e.g. a standard C function: <_:"
"informalexample-1/>"
"informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1532
+#: C/index.docbook:1535
#, no-wrap
msgid ""
"\n"
"</example>\n"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1543
+#: C/index.docbook:1546
#, no-wrap
msgid ""
"\n"
"</informalexample>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1529
+#: C/index.docbook:1532
msgid ""
"To include example code: <_:informalexample-1/> or possibly this, for very "
"short code fragments which don't need a title: <_:informalexample-2/> For "
"informalexample-2/>. El último GTK-Doc también soporta abreviación: |[ ... ]|"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1562
+#: C/index.docbook:1565
#, no-wrap
msgid ""
"\n"
"</itemizedlist>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1559
+#: C/index.docbook:1562
msgid "To include bulleted lists: <_:informalexample-1/>"
msgstr "Para incluir listas de topos: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1582
+#: C/index.docbook:1585
#, no-wrap
msgid ""
"\n"
"</note>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1579
+#: C/index.docbook:1582
msgid ""
"To include a note which stands out from the text: <_:informalexample-1/>"
msgstr "Para incluir una nota que sobresale del texto: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1595
+#: C/index.docbook:1598
#, no-wrap
msgid ""
"\n"
"<type>unsigned char</type>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1592
+#: C/index.docbook:1595
msgid "To refer to a type: <_:informalexample-1/>"
msgstr "Para referirse a un tipo: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1604
+#: C/index.docbook:1607
#, no-wrap
msgid ""
"\n"
"<structname>XFontStruct</structname>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1601
+#: C/index.docbook:1604
msgid ""
"To refer to an external structure (not one described in the GTK docs): <_:"
"informalexample-1/>"
"de GTK): <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1613
+#: C/index.docbook:1616
#, no-wrap
msgid ""
"\n"
"<structfield>len</structfield>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1610
+#: C/index.docbook:1613
msgid "To refer to a field of a structure: <_:informalexample-1/>"
msgstr "Para referirse a un campo o a una estructura: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1622
+#: C/index.docbook:1625
#, no-wrap
msgid ""
"\n"
"<classname>GtkWidget</classname>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1619
+#: C/index.docbook:1622
msgid ""
"To refer to a class name, we could possibly use: <_:informalexample-1/> but "
"you'll probably be using #GtkWidget instead (to automatically create a link "
"\"documenting_syntax\">abreviaciones</link>)."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1633
+#: C/index.docbook:1636
#, no-wrap
msgid ""
"\n"
"<emphasis>This is important</emphasis>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1630
+#: C/index.docbook:1633
msgid "To emphasize text: <_:informalexample-1/>"
msgstr "Para enfatizar un texto: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1642
+#: C/index.docbook:1645
#, no-wrap
msgid ""
"\n"
"<filename>/home/user/documents</filename>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1639
+#: C/index.docbook:1642
msgid "For filenames use: <_:informalexample-1/>"
msgstr "Para uso de nombres de archivo: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1651
+#: C/index.docbook:1654
#, no-wrap
msgid ""
"\n"
"<keycombo><keycap>Control</keycap><keycap>L</keycap></keycombo>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1648
+#: C/index.docbook:1651
msgid "To refer to keys use: <_:informalexample-1/>"
msgstr "Para referirse a claves: <_:informalexample-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:1661
+#: C/index.docbook:1664
msgid "Filling the extra files"
msgstr "Rellenar campos adicionales"
#. (itstool) path: chapter/para
-#: C/index.docbook:1663
+#: C/index.docbook:1666
msgid ""
"There are a couple of extra files, that need to be maintained along with the "
"inline source code comments: <filename><package>.types</filename>, "
"pasado) y <filename><paquete>-sections.txt</filename>."
#. (itstool) path: sect1/title
-#: C/index.docbook:1672
+#: C/index.docbook:1675
msgid "Editing the types file"
msgstr "Editar los tipos de archivo"
#. (itstool) path: sect1/para
-#: C/index.docbook:1674
+#: C/index.docbook:1677
msgid ""
"If your library or application includes GObjects, you want their signals, "
"arguments/parameters and position in the hierarchy to be shown in the "
"<filename><paquete>.types</filename>."
#. (itstool) path: example/title
-#: C/index.docbook:1683
+#: C/index.docbook:1686
msgid "Example types file snippet"
msgstr "Fragmento de ejemplo de tipos de archivo"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1684
+#: C/index.docbook:1687
#, no-wrap
msgid ""
"\n"
"gtk_arrow_get_type\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1695
+#: C/index.docbook:1698
msgid ""
"Since GTK-Doc 1.8 <application>gtkdoc-scan</application> can generate this "
"list for you. Just add \"--rebuild-types\" to SCAN_OPTIONS in "
"los tipos de archivo ni tenerlos bajo el control de versiones."
#. (itstool) path: sect1/title
-#: C/index.docbook:1704
+#: C/index.docbook:1707
msgid "Editing the master document"
msgstr "Editar la sección maestra del documento"
#. (itstool) path: sect1/para
-#: C/index.docbook:1706
+#: C/index.docbook:1709
msgid ""
"GTK-Doc produces documentation in DocBook SGML/XML. When processing the "
"inline source comments, the GTK-Doc tools generate one documentation page "
"documento maestro las incluye y ordena."
#. (itstool) path: sect1/para
-#: C/index.docbook:1713
+#: C/index.docbook:1716
msgid ""
"While GTK-Doc creates a template master document for you, later runs will "
"not touch it again. This means that one can freely structure the "
"vez en cuando para ver si se han introducido algunas mejoras."
#. (itstool) path: tip/para
-#: C/index.docbook:1723
+#: C/index.docbook:1726
msgid ""
"Do not create tutorials as extra documents. Just write extra chapters. The "
"benefit of directly embedding the tutorial for your library into the API "
"el tutorial junto con la biblioteca son mayores."
#. (itstool) path: sect1/para
-#: C/index.docbook:1732
+#: C/index.docbook:1735
msgid ""
"So what are the things to change inside the master document? For a start is "
"only a little. There are some placeholders (text in square brackets) there "
"que habría que encargarse."
#. (itstool) path: example/title
-#: C/index.docbook:1739
+#: C/index.docbook:1742
msgid "Master document header"
msgstr "Cabecera del documento maestro"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1740
+#: C/index.docbook:1743
#, no-wrap
msgid ""
"\n"
" <title>[Insert title here]</title>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1756
+#: C/index.docbook:1759
msgid ""
"In addition a few option elements are created in commented form. You can "
"review these and enable them as you like."
"Puede revisarlos y activarlos como quiera."
#. (itstool) path: example/title
-#: C/index.docbook:1762
+#: C/index.docbook:1765
msgid "Optional part in the master document"
msgstr "Parte opcional en el documento maestro"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1763
+#: C/index.docbook:1766
#, no-wrap
-#| msgid ""
-#| "\n"
-#| " <!-- enable this when you use gobject introspection annotations\n"
-#| " <xi:include href=\"xml/annotation-glossary.xml\"><xi:fallback /></xi:include>\n"
-#| " --> \n"
msgid ""
"\n"
" <!-- enable this when you use gobject introspection annotations\n"
" --> \n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1771
+#: C/index.docbook:1774
msgid ""
"Finally you need to add new section whenever you introduce one. The <link "
"linkend=\"modernizing-gtk-doc-1-16\">gtkdoc-check</link> tool will remind "
"todavía en la documentación."
#. (itstool) path: example/title
-#: C/index.docbook:1779 C/index.docbook:1814
+#: C/index.docbook:1782 C/index.docbook:1817
msgid "Including generated sections"
msgstr "Incluir secciones generadas"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1780
+#: C/index.docbook:1783
#, no-wrap
msgid ""
"\n"
" ...\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:1792
+#: C/index.docbook:1795
msgid "Editing the section file"
msgstr "Editar el archivo de sección"
#. (itstool) path: sect1/para
-#: C/index.docbook:1794
+#: C/index.docbook:1797
msgid ""
"The section file is used to organise the documentation output by GTK-Doc. "
"Here one specifies which symbol belongs to which module or class and control "
"y el control de la visibilidad (pública o privada)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1800
+#: C/index.docbook:1803
msgid ""
"The section file is a plain text file with tags delimiting sections. Blank "
"lines are ignored and lines starting with a '#' are treated as comment lines."
"comiencen con «#» se tratan como comentarios."
#. (itstool) path: note/para
-#: C/index.docbook:1807
+#: C/index.docbook:1810
msgid ""
"While the tags make the file look like xml, it is not. Please do not close "
"tags like <SUBSECTION>."
"etiquetas del tipo <SUBSECTION>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1815
+#: C/index.docbook:1818
#, no-wrap
msgid ""
"\n"
"</SECTION>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1832
+#: C/index.docbook:1835
msgid ""
"The <FILE> ... </FILE> tag is used to specify the file name, "
"without any suffix. For example, using '<FILE>gnome-config</"
"clase de GObject convertido a minúscula.)"
#. (itstool) path: sect1/para
-#: C/index.docbook:1844
+#: C/index.docbook:1847
msgid ""
"The <TITLE> ... </TITLE> tag is used to specify the title of the "
"section. It is only useful before the templates (if used) are initially "
"obsoleto."
#. (itstool) path: sect1/para
-#: C/index.docbook:1851
+#: C/index.docbook:1854
msgid ""
"You can group items in the section by using the <SUBSECTION> tag. "
"Currently it outputs a blank line between subsections in the synopsis "
"públicas (variables, vmethods)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1870
+#: C/index.docbook:1873
msgid ""
"You can also use <INCLUDE> ... </INCLUDE> to specify the "
"#include files which are shown in the synopsis sections. It contains a comma-"
"a esa sección."
#. (itstool) path: chapter/title
-#: C/index.docbook:1884
+#: C/index.docbook:1887
msgid "Controlling the result"
msgstr "Controlar el resultado"
#. (itstool) path: chapter/para
-#: C/index.docbook:1886
+#: C/index.docbook:1889
msgid ""
"A GTK-Doc run generates report files inside the documentation directory. The "
"generated files are named: <filename><package>-undocumented.txt</"
"archivos de texto plano y se pueden ver y posprocesar fácilmente."
#. (itstool) path: chapter/para
-#: C/index.docbook:1895
+#: C/index.docbook:1898
msgid ""
"The <filename><package>-undocumented.txt</filename> file starts with "
"the documentation coverage summary. Below are two sections divided by blank "
"documentación pero dónde; p.e. se ha añadido un parámetro nuevo."
#. (itstool) path: chapter/para
-#: C/index.docbook:1904
+#: C/index.docbook:1907
msgid ""
"The <filename><package>-undeclared.txt</filename> file lists symbols "
"given in the <filename><package>-sections.txt</filename> but not found "
"eliminado o no se han escrito correctamente."
#. (itstool) path: chapter/para
-#: C/index.docbook:1911
+#: C/index.docbook:1914
msgid ""
"The <filename><package>-unused.txt</filename> file lists symbol names, "
"where the GTK-Doc scanner has found documentation, but does not know where "
"todavía al archivo <filename><paquete>-sections.txt</filename>."
#. (itstool) path: tip/para
-#: C/index.docbook:1919
+#: C/index.docbook:1922
msgid ""
"Enable or add the <option>TESTS=$(GTKDOC_CHECK)</option> line in Makefile."
"am. If at least GTK-Doc 1.9 is installed, this will run sanity checks during "
"de integridad durante la ejecución de make check."
#. (itstool) path: chapter/para
-#: C/index.docbook:1926
+#: C/index.docbook:1929
msgid ""
"One can also look at the files produced by the source code scanner: "
"<filename><package>-decl-list.txt</filename> and <filename><"
"si este archivo lo contiene."
#. (itstool) path: chapter/para
-#: C/index.docbook:1935
+#: C/index.docbook:1938
msgid ""
"If the project is GObject based, one can also look into the files produced "
"by the object scanner: <filename><package>.args.txt</filename>, "
"ejecutándolo como <command>GTK_DOC_KEEP_INTERMEDIATE=1 make</command>."
#. (itstool) path: chapter/title
-#: C/index.docbook:1950
+#: C/index.docbook:1953
msgid "Modernizing the documentation"
msgstr "Modernizar la documentación"
#. (itstool) path: chapter/para
-#: C/index.docbook:1952
+#: C/index.docbook:1955
msgid ""
"GTK-Doc has been around for quite some time. In this section we list new "
"features together with the version since when it is available."
"características nuevas junto con la versión desde la que están disponibles."
#. (itstool) path: sect1/title
-#: C/index.docbook:1958
+#: C/index.docbook:1961
msgid "GTK-Doc 1.9"
msgstr "GTK-Doc 1.9"
#. (itstool) path: sect1/para
-#: C/index.docbook:1960
+#: C/index.docbook:1963
msgid ""
"When using xml instead of sgml, one can actually name the master document "
"<filename><package>-docs.xml</filename>."
"maestro <filename><paquete>-docs.xml</filename>."
#. (itstool) path: sect1/para
-#: C/index.docbook:1965
+#: C/index.docbook:1968
msgid ""
"This version supports <option>SCAN_OPTIONS=--rebuild-sections</option> in "
"<filename>Makefile.am</filename>. When this is enabled, the <filename><"
"paquete>-decl-list.txt <paquete>-sections.txt</code>."
#. (itstool) path: sect1/para
-#: C/index.docbook:1976
-#| msgid ""
-#| "Version 1.8 already introduced the syntax for documenting sections in the "
-#| "sources instead of the separate files under <filename class=\"directory"
-#| "\">tmpl</filename>. This version adds options to switch the whole doc "
-#| "module to not use the extra tmpl build step at all, by using <option>--"
-#| "flavour no-tmpl</option> in <filename>configure.ac</filename>. If you "
-#| "don't have a <filename class=\"directory\">tmpl</filename> checked into "
-#| "you source control system and haven't yet switched, just add the flag to "
-#| "<filename>configure.ac</filename> and you are done."
+#: C/index.docbook:1979
msgid ""
"Version 1.8 already introduced the syntax for documenting sections in the "
"sources instead of the separate files under <filename class=\"directory"
"<filename>configure.ac</filename> y lo tendrá hecho."
#. (itstool) path: sect1/title
-#: C/index.docbook:1988
+#: C/index.docbook:1991
msgid "GTK-Doc 1.10"
msgstr "GTK-Doc 1.10"
#. (itstool) path: sect1/para
-#: C/index.docbook:1990
+#: C/index.docbook:1993
msgid ""
"This version supports <option>SCAN_OPTIONS=--rebuild-types</option> in "
"<filename>Makefile.am</filename>. When this is enabled, the <filename><"
"condicional."
#. (itstool) path: sect1/title
-#: C/index.docbook:2001
+#: C/index.docbook:2004
msgid "GTK-Doc 1.16"
msgstr "GTK-Doc 1.16"
#. (itstool) path: example/title
-#: C/index.docbook:2007
+#: C/index.docbook:2010
msgid "Enable gtkdoc-check"
msgstr "Activar gtkdoc-check"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2008
+#: C/index.docbook:2011
#, no-wrap
msgid ""
"\n"
"endif\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:2003
+#: C/index.docbook:2006
msgid ""
"This version includes a new tool called gtkdoc-check. This tool can run a "
"set of sanity checks on your documentation. It is enabled by adding these "
"archivo <filename>Makefile.am</filename>. <_:example-1/>"
#. (itstool) path: sect1/title
-#: C/index.docbook:2021
+#: C/index.docbook:2024
msgid "GTK-Doc 1.20"
msgstr "GTK-Doc 1.20"
#. (itstool) path: sect1/para
-#: C/index.docbook:2023
+#: C/index.docbook:2026
msgid ""
"Version 1.18 brought some initial markdown support. Using markdown in doc "
"comments is less intrusive than writing docbook xml. This version improves a "
"comentarios</link> contiene todos los detalles."
#. (itstool) path: sect1/title
-#: C/index.docbook:2033
+#: C/index.docbook:2036
msgid "GTK-Doc 1.25"
msgstr "GTK-Doc 1.25"
#. (itstool) path: example/title
-#: C/index.docbook:2043
+#: C/index.docbook:2046
msgid "Use pre-generated entities"
msgstr "Usar entidades generadas previamenet"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2044
+#: C/index.docbook:2047
#, no-wrap
msgid ""
"\n"
" </bookinfo>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:2035
-#| msgid ""
-#| "The makefiles shipped with this version generate an entity file at "
-#| "<filename>xml/gtkdocentities.ent</filename>, containing entities for e.g. "
-#| "package_name and package_version. You can use this e.g. in the main xml "
-#| "file to avoid hardcoding the version number. Below is any example that "
-#| "shows how the entity file is included and how the entities are used. The "
-#| "entities can also be used in all generated files, GTK-Doc will use the "
-#| "same xml header in generated xml files. <_:example-1/>"
+#: C/index.docbook:2038
msgid ""
"The makefiles shipped with this version generate an entity file at "
"<filename>xml/gtkdocentities.ent</filename>, containing entities for e.g. "
"archivos XML generados. <_:example-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:2069
+#: C/index.docbook:2072
msgid "Documenting other interfaces"
msgstr "Documentar otras interfaces"
#. (itstool) path: chapter/para
-#: C/index.docbook:2071
+#: C/index.docbook:2074
msgid ""
"So far we have been using GTK-Doc to document the API of code. The next "
"sections contain suggestions how the tools can be used to document other "
"herramientas para documentar otras interfaces."
#. (itstool) path: sect1/title
-#: C/index.docbook:2078
+#: C/index.docbook:2081
msgid "Command line options and man pages"
msgstr "Opciones de la línea de comandos y páginas man"
#. (itstool) path: sect1/para
-#: C/index.docbook:2080
+#: C/index.docbook:2083
msgid ""
"As one can generate man pages for a docbook refentry as well, it sounds like "
"a good idea to use it for that purpose. This way the interface is part of "
"interfaz es parte de la referencia y se obtienen las páginas man sin trabajo."
#. (itstool) path: sect2/title
-#: C/index.docbook:2087
+#: C/index.docbook:2090
msgid "Document the tool"
msgstr "Documentar la herramienta"
#. (itstool) path: sect2/para
-#: C/index.docbook:2089
+#: C/index.docbook:2092
msgid ""
"Create one refentry file per tool. Following <link linkend="
"\"settingup_docfiles\">our example</link> we would call it <filename>meep/"
"así como los ejemplos en, por ejemplo, glib."
#. (itstool) path: sect2/title
-#: C/index.docbook:2099
+#: C/index.docbook:2102
msgid "Adding the extra configure check"
msgstr "Añadir la comprobación de configuración adicional"
#. (itstool) path: example/title
-#: C/index.docbook:2102 C/index.docbook:2120
+#: C/index.docbook:2105 C/index.docbook:2123
msgid "Extra configure checks"
msgstr "Comprobaciones de configuración adicionales"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2103
+#: C/index.docbook:2106
#, no-wrap
msgid ""
"\n"
"AM_CONDITIONAL(ENABLE_MAN, test x$enable_man != xno)\n"
#. (itstool) path: sect2/title
-#: C/index.docbook:2117
+#: C/index.docbook:2120
msgid "Adding the extra makefile rules"
msgstr "Añadir reglas de makefile adicionales"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2121
+#: C/index.docbook:2124
#, no-wrap
msgid ""
"\n"
"EXTRA_DIST += meep.xml\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:2143
+#: C/index.docbook:2146
msgid "DBus interfaces"
msgstr "Interfaces de DBus"
#. (itstool) path: sect1/para
-#: C/index.docbook:2145
+#: C/index.docbook:2148
msgid ""
"(FIXME: http://hal.freedesktop.org/docs/DeviceKit/DeviceKit.html, http://"
"cgit.freedesktop.org/DeviceKit/DeviceKit/tree/doc/dbus)"
"cgit.freedesktop.org/DeviceKit/DeviceKit/tree/doc/dbus)"
#. (itstool) path: chapter/title
-#: C/index.docbook:2154
+#: C/index.docbook:2157
msgid "Frequently asked questions"
msgstr "Preguntas más frecuentes"
#. (itstool) path: segmentedlist/segtitle
-#: C/index.docbook:2158
+#: C/index.docbook:2161
msgid "Question"
msgstr "Pregunta"
#. (itstool) path: segmentedlist/segtitle
-#: C/index.docbook:2159
+#: C/index.docbook:2162
msgid "Answer"
msgstr "Respuesta"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2161
+#: C/index.docbook:2164
msgid "No class hierarchy."
msgstr "Sin jerarquía de clases."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2162
+#: C/index.docbook:2165
msgid ""
"The objects <function>xxx_get_type()</function> function has not been "
"entered into the <filename><package>.types</filename> file."
"introducido en el archivo <filename><package>.types</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2168
+#: C/index.docbook:2171
msgid "Still no class hierarchy."
msgstr "Aún sin jerarquía de clases."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2169
+#: C/index.docbook:2172
msgid ""
"Missing or wrong naming in <filename><package>-sections.txt</filename> "
"file (see <ulink url=\"http://mail.gnome.org/archives/gtk-doc-list/2003-"
"doc-list/2003-October/msg00006.html\">explicación</ulink>)."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2175
+#: C/index.docbook:2178
msgid "Damn, I have still no class hierarchy."
msgstr "Maldición, aún no hay una jerarquía de clases."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2176
+#: C/index.docbook:2179
msgid ""
"Is the object name (name of the instance struct, e.g. <type>GtkWidget</"
"type>) part of the normal section (don't put this into Standard or Private "
"Estándar o Privado)."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2183
+#: C/index.docbook:2186
msgid "No symbol index."
msgstr "Sin índice de símbolos."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2184
+#: C/index.docbook:2187
msgid ""
"Does the <filename><package>-docs.{xml,sgml}</filename> contain a "
"index that xi:includes the generated index?"
"«xi:includes» el índice generado?"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2190
+#: C/index.docbook:2193
msgid "Symbols are not linked to their doc-section."
msgstr "Los símbolos no se enlazan con su sección en el documento."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2191
+#: C/index.docbook:2194
msgid ""
"Is the doc-comment using the correct markup (added #,% or ())? Check if the "
"gtkdoc-fixxref warns about unresolvable xrefs."
"si gtk-doc-fixxref avisa de alguna referencia xref sin resolver."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2197
+#: C/index.docbook:2200
msgid "A new class does not appear in the docs."
msgstr "Una clase nueva no aparece en la documentación."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2198
+#: C/index.docbook:2201
msgid ""
"Is the new page xi:included from <filename><package>-docs.{xml,sgml}</"
"filename>."
"sgml}</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2204
+#: C/index.docbook:2207
msgid "A new symbol does not appear in the docs."
msgstr "Un símbolo nuevo no aparece en la documentación."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2205
+#: C/index.docbook:2208
msgid ""
"Is the doc-comment properly formatted. Check for spelling mistakes in the "
"begin of the comment. Check if the gtkdoc-fixxref warns about unresolvable "
"txt</filename> en una subsección pública."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2213
+#: C/index.docbook:2216
msgid "A type is missing from the class hierarchy."
msgstr "Falta un tipo en la clase de jerarquías"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2214
+#: C/index.docbook:2217
msgid ""
"If the type is listed in <filename><package>.hierarchy</filename> but "
"not in <filename>xml/tree_index.sgml</filename> then double check that the "
"privada."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2223
+#: C/index.docbook:2226
msgid "I get foldoc links for all gobject annotations."
msgstr ""
"Obtengo enlaces de seguimiento de documentos para todas las anotaciones "
"gobject."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2224
+#: C/index.docbook:2227
msgid ""
"Check that <filename>xml/annotation-glossary.xml</filename> is xi:included "
"from <filename><package>-docs.{xml,sgml}</filename>."
"included» desde <filename><package>-docs.{xml,sgml}</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2232
+#: C/index.docbook:2235
msgid "Parameter described in source code comment block but does not exist"
msgstr ""
"Parámetro descrito en el bloque de comentarios del código fuente pero no "
"existe"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2233
+#: C/index.docbook:2236
msgid ""
"Check if the prototype in the header has different parameter names as in the "
"source."
"diferentes de la fuente."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2238
+#: C/index.docbook:2241
msgid "multiple \"IDs\" for constraint linkend: XYZ"
msgstr "múltiples «ID» para la restricción enlazada: XYZ"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2239
+#: C/index.docbook:2242
msgid ""
"Symbol XYZ appears twice in <filename><package>-sections.txt</"
"filename> file."
"sections.txt</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2242
+#: C/index.docbook:2245
msgid ""
"Element typename in namespace '' encountered in para, but no template "
"matches."
"coincide."
#. (itstool) path: chapter/title
-#: C/index.docbook:2249
+#: C/index.docbook:2252
msgid "Tools related to gtk-doc"
msgstr "Herramientas relacionadas con GTK-Doc"
#. (itstool) path: chapter/para
-#: C/index.docbook:2251
+#: C/index.docbook:2254
msgid ""
"GtkDocPlugin - a <ulink url=\"http://trac-hacks.org/wiki/GtkDocPlugin\">Trac "
"GTK-Doc</ulink> integration plugin, that adds API docs to a trac site and "
"a un sitio «trac» y se integra con la búsqueda de «trac»."
#. (itstool) path: chapter/para
-#: C/index.docbook:2256
+#: C/index.docbook:2259
msgid ""
"Gtkdoc-depscan - a tool (part of gtk-doc) to check used API against since "
"tags in the API to determine the minimum required version."
"libre que usted elija, como la <_:ulink-1/>, para permitir su uso en "
"software libre."
+#~ msgid "<guilabel>Python</guilabel> - optional - for gtkdoc-depscan"
+#~ msgstr "<guilabel>Python</guilabel>: opcional, para gtkdoc-depscan"
+
#~ msgid ""
#~ "<guilabel>Generating the \"template\" files.</guilabel> "
#~ "<application>gtkdoc-mktmpl</application> creates a number of files in the "
</legalnotice>
<revhistory>
- <revision><revnumber>1.25.1</revnumber> <date>21 de mayo de 2016</date> <authorinitials>ss</authorinitials> <revremark>versión de desarrollo</revremark></revision>
+ <revision>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision><revnumber>1.26</revnumber> <date>11 de agosto de 2017</date> <authorinitials>ss</authorinitials> <revremark>portar todas las herramientas de perl/bash a python</revremark></revision>
<revision><revnumber>1.25</revnumber> <date>21 de marzo de 2016</date> <authorinitials>ss</authorinitials> <revremark>correcciones de errores, limpieza</revremark></revision>
<revision><revnumber>1.24</revnumber> <date>29 de mayo de 2015</date> <authorinitials>ss</authorinitials> <revremark>correcciones de errores</revremark></revision>
<revision><revnumber>1.23</revnumber> <date>17 de mayo de 2015</date> <authorinitials>ss</authorinitials> <revremark>correcciones de errores</revremark></revision>
<para>GTK-Doc funciona usando documentación de las funciones ubicadas dentro de los archivos de fuentes en bloques de comentarios especialmente formateados, o documentación añadida a los archivos de plantillas que GTK-Doc usa (aunque debe notar que GTK-Doc sólo documentará las funciones declaradas en los archivos de cabecera; no produce salida para funciones estáticas).</para>
- <para>GTK-Doc consiste en un número de scripts en Perl, cada uno realiza un paso diferente en el proceso.</para>
+ <para>GTK-Doc consiste en un número de scripts en python, cada uno realiza un paso diferente en el proceso.</para>
<para>Existen 5 pasos importantes en el proceso:</para>
<sect2 id="requirements">
<title>Requerimientos</title>
- <para><guilabel>Perl v5</guilabel>: los scripts principales están en Perl.</para>
+ <para><guilabel>python 2/3</guilabel> - los scripts principales están escritos en python.</para>
<para><guilabel>xsltproc</guilabel>: el procesador xslt de libxslt <ulink url="http://xmlsoft.org/XSLT/" type="http">xmlsoft.org/XSLT/</ulink></para>
<para><guilabel>docbook-xsl</guilabel>: las hojas de estilo XLS de docbook <ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink></para>
- <para><guilabel>Python</guilabel>: opcional, para gtkdoc-depscan</para>
<para>Una de <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> o <guilabel>vim</guilabel>: opcional, usada para el resaltado de sintaxis de los ejemplos.</para>
</sect2>
</sect1>
</itemizedlist></para>
<example><title>Bloque de comentario de señal</title>
- <programlisting>
+ <programlisting><![CDATA[
/**
* FooWidget::foobarized:
* @widget: the widget that received the signal
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
-</programlisting>
+]]></programlisting>
</example>
</sect2>
<revhistory>
<revision>
- <revnumber>1.25.1</revnumber>
- <date>21 March 2016</date>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
<authorinitials>ss</authorinitials>
- <revremark>development version</revremark>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision>
+ <revnumber>1.26</revnumber>
+ <date>11 Aug 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>port all tools from perl/bash to python</revremark>
</revision>
<revision>
<revnumber>1.25</revnumber>
<para>GTK-Doc fonctionne en utilisant la documentation de fonctions placées dans le code source sous la forme de blocs de commentaires avec un formatage spécifique ou la documentation ajoutée aux fichiers prototypes que GTK-Doc utilise (notez cependant que GTK-Doc ne documente que les fonctions déclarées dans des fichiers d'en-tête ; il ne fait rien pour les fonctions statiques).</para>
- <para>GTK-Doc consiste en un certain nombre de scripts Perl, chacun réalisant une étape du processus.</para>
+ <para>
+ GTK-Doc consists of a number of python scripts, each performing a different step
+ in the process.
+ </para>
<para>Il y a 5 étapes principales :</para>
<sect2 id="requirements">
<title>Pré-requis</title>
- <para><guilabel>Perl v5</guilabel> - les principaux scripts sont écrits en Perl.</para>
+ <para>
+ <guilabel>python 2/3</guilabel> - the main scripts are written in python.
+ </para>
<para>
<guilabel>xsltproc</guilabel> - the xslt processor from libxslt
<ulink url="http://xmlsoft.org/XSLT/" type="http">xmlsoft.org/XSLT/</ulink>
<ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>
</para>
<para>
- <guilabel>Python</guilabel> - optional - for gtkdoc-depscan
- </para>
- <para>
One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> or
<guilabel>vim</guilabel> - optional - used for syntax highlighting of examples
</para>
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
]]></programlisting>
</example>
<revhistory>
<revision>
- <revnumber>1.25.1</revnumber>
- <date>21 March 2016</date>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
<authorinitials>ss</authorinitials>
- <revremark>development version</revremark>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision>
+ <revnumber>1.26</revnumber>
+ <date>11 Aug 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>port all tools from perl/bash to python</revremark>
</revision>
<revision>
<revnumber>1.25</revnumber>
</para>
<para>
- GTK-Doc consists of a number of perl scripts, each performing a different step
+ GTK-Doc consists of a number of python scripts, each performing a different step
in the process.
</para>
<sect2 id="requirements">
<title>Requirements</title>
<para>
- <guilabel>Perl v5</guilabel> - the main scripts are in Perl.
+ <guilabel>python 2/3</guilabel> - the main scripts are written in python.
</para>
<para>
<guilabel>xsltproc</guilabel> - the xslt processor from libxslt
<ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>
</para>
<para>
- <guilabel>Python</guilabel> - optional - for gtkdoc-depscan
- </para>
- <para>
One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> or
<guilabel>vim</guilabel> - optional - used for syntax highlighting of examples
</para>
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
]]></programlisting>
</example>
<revhistory>
<revision>
- <revnumber>1.25.1</revnumber>
- <date>21 March 2016</date>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
<authorinitials>ss</authorinitials>
- <revremark>development version</revremark>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision>
+ <revnumber>1.26</revnumber>
+ <date>11 Aug 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>port all tools from perl/bash to python</revremark>
</revision>
<revision>
<revnumber>1.25</revnumber>
<para>GTK-Doc એ વિશિષ્ટ રીતે માળખુ થયેલ ટિપ્પણી બ્લોકોમાં સ્ત્રોત ફાઇલોની અંદર સ્થિત થયેલ વિધેયોનાં દસ્તાવેજીકરણની મદદથી કામ કરે છે, અથવા દસ્તાવેજીકરણ ટેમ્પલેટ ફાઇલોમાં ઉમેરાયેલ છે કે જે GTK-Doc વાપરે છે (છતાંપણ નોંધો કે GTK-Doc એ પણ દસ્તાવેજ વિધેયો હશે કે જે શીર્ષક ફાઇલોમાં જાહેર થયેલ છે; તે સ્થિર વિધેયો માટે આઉટપુટ ઉત્પન્ન કરતુ નથી).</para>
- <para>GTK-Doc એ perl સ્ક્રિપ્ટોની સંખ્યાને સમાવે છે, પ્રક્રિયામાં દરેક વિવિધ પગલું કરે છે.</para>
+ <para>
+ GTK-Doc consists of a number of python scripts, each performing a different step
+ in the process.
+ </para>
<para>ત્યાં પ્રક્રિયામાં મુખ્ય ૫ પગલાંઓ છે:</para>
<sect2 id="requirements">
<title>જરૂરિયાતો</title>
- <para><guilabel>Perl v5</guilabel> - મુખ્ય સ્ક્રિપ્ટો એ Perl માં છે.</para>
+ <para>
+ <guilabel>python 2/3</guilabel> - the main scripts are written in python.
+ </para>
<para>
<guilabel>xsltproc</guilabel> - the xslt processor from libxslt
<ulink url="http://xmlsoft.org/XSLT/" type="http">xmlsoft.org/XSLT/</ulink>
<ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>
</para>
<para>
- <guilabel>Python</guilabel> - optional - for gtkdoc-depscan
- </para>
- <para>
One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> or
<guilabel>vim</guilabel> - optional - used for syntax highlighting of examples
</para>
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
]]></programlisting>
</example>
</legalnotice>
<revhistory>
- <revision><revnumber>1.25.1</revnumber> <date>21 Março 2016</date> <authorinitials>ss</authorinitials> <revremark>versão de desenvolvimento</revremark></revision>
+ <revision>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision><revnumber>1.26</revnumber> <date>11 Agosto 2017</date> <authorinitials>ss</authorinitials> <revremark>portadas todas ferramentas de perl/bash para Python</revremark></revision>
<revision><revnumber>1.25</revnumber> <date>21 Março 2016</date> <authorinitials>ss</authorinitials> <revremark>correção de erros, limpezas de testes</revremark></revision>
<revision><revnumber>1.24</revnumber> <date>29 Maio 2015</date> <authorinitials>ss</authorinitials> <revremark>correção de erros</revremark></revision>
<revision><revnumber>1.23</revnumber> <date>17 Maio 2015</date> <authorinitials>ss</authorinitials> <revremark>correção de erros</revremark></revision>
<revision><revnumber>1.14</revnumber> <date>28 Mar 2010</date> <authorinitials>sk</authorinitials> <revremark>Correção de erro e melhorias na performance</revremark></revision>
<revision><revnumber>1.13</revnumber> <date>18 Dez 2009</date> <authorinitials>sk</authorinitials> <revremark>atualização de tarball defeituoso</revremark></revision>
<revision><revnumber>1.12</revnumber> <date>18 Dez 2009</date> <authorinitials>sk</authorinitials> <revremark>novas funcionalidades da ferramenta e correção de erros</revremark></revision>
- <revision><revnumber>1.11</revnumber> <date>16 Nov 2008</date> <authorinitials>mal</authorinitials> <revremark>Migração do GNOME doc-utils</revremark></revision>
+ <revision><revnumber>1.11</revnumber> <date>16 Nov 2008</date> <authorinitials>mal</authorinitials> <revremark>migração do GNOME doc-utils</revremark></revision>
</revhistory>
<para>O GTK-Doc funciona usando a documentação de funções colocadas dentro dos arquivos fonte em blocos de comentários especialmente formatados ou documentação adicionada aos arquivos modelo que o GTK-Doc usa (apesar disso, note que o GTK-Doc vai documentar apenas funções que são declaradas em arquivos de cabeçalho; ele não irá produzir saída para funções estáticas).</para>
- <para>GTK-Doc consiste de um número de scripts perl, cada um executando uma etapa diferente no processo.</para>
+ <para>GTK-Doc consiste de um número de scripts em Python, cada um executando uma etapa diferente no processo.</para>
<para>Há 5 etapas principais no processo:</para>
<sect2 id="requirements">
<title>Requisitos</title>
- <para><guilabel>Perl v5</guilabel> - os scripts principais são Perl.</para>
+ <para><guilabel>python 2/3</guilabel> - os scripts principais são escritos em Python.</para>
<para><guilabel>xsltproc</guilabel> - o processador de xslt do libxslt <ulink url="http://xmlsoft.org/XSLT/" type="http">xmlsoft.org/XSLT/</ulink></para>
<para><guilabel>docbook-xsl</guilabel> - as folhas de estilo xsl de docbook <ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink></para>
- <para><guilabel>Python</guilabel> - opcional - para gtkdoc-depscan</para>
<para>Um dentre <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> ou <guilabel>vim</guilabel> - opcional - usado para destaque de sintaxe de exemplos</para>
</sect2>
</sect1>
</itemizedlist></para>
<example><title>Bloco de comentário de sinal</title>
- <programlisting>
+ <programlisting><![CDATA[
/**
- * FooWidget::foobarizado:
- * @widget: o widget que recebeu o sinal
- * @foo: algum foo
- * @bar: algum bar
+ * FooWidget::foobarized:
+ * @widget: the widget that received the signal
+ * @foo: some foo
+ * @bar: some bar
*
- * O sinal ::foobarized é emitido cada vez que alguém tenta foobarizar @widget.
+ * The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_sinais[FOOBARIZAR] =
- g_signal_novo ("foobarizar",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
-</programlisting>
+]]></programlisting>
</example>
</sect2>
"Project-Id-Version: gtk-doc help\n"
"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gtk-"
"doc&keywords=I18N+L10N&component=general\n"
-"POT-Creation-Date: 2017-04-23 16:21+0000\n"
-"PO-Revision-Date: 2017-04-25 08:24-0200\n"
+"POT-Creation-Date: 2017-08-11 11:08+0000\n"
+"PO-Revision-Date: 2017-08-12 20:07-0200\n"
"Last-Translator: Rafael Fontenelle <rafaelff@gnome.org>\n"
"Language-Team: Brazilian Portuguese <gnome-pt_br-list@gnome.org>\n"
"Language: pt_BR\n"
#. (itstool) path: revhistory/revision
#: C/index.docbook:83
+#| msgid ""
+#| "<revnumber>1.25.1</revnumber> <date>21 March 2016</date> "
+#| "<authorinitials>ss</authorinitials> <revremark>development version</"
+#| "revremark>"
msgid ""
-"<revnumber>1.2
5.1</revnumber> <date>21 March 2016</date> <authorinitials>ss</"
-"authorinitials> <revremark>development version</revremark>"
+"<revnumber>1.2
6.1</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>development</revremark>"
msgstr ""
-"<revnumber>1.25.1</revnumber> <date>21 Março 2016</date> <authorinitials>ss</"
-"authorinitials> <revremark>versão de desenvolvimento</revremark>"
+"<revnumber>1.26.1</revnumber> <date>11 Agosto 2017</date> "
+"<authorinitials>ss</authorinitials> <revremark>desenvolvimento</revremark>"
#. (itstool) path: revhistory/revision
#: C/index.docbook:89
+#| msgid ""
+#| "<revnumber>1.25.1</revnumber> <date>21 March 2016</date> "
+#| "<authorinitials>ss</authorinitials> <revremark>development version</"
+#| "revremark>"
+msgid ""
+"<revnumber>1.26</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>port all tools from perl/bash to python</"
+"revremark>"
+msgstr ""
+"<revnumber>1.26</revnumber> <date>11 Agosto 2017</date> "
+"<authorinitials>ss</authorinitials> <revremark>portadas todas ferramentas de "
+"perl/bash para Python</revremark>"
+
+#. (itstool) path: revhistory/revision
+#: C/index.docbook:95
msgid ""
"<revnumber>1.25</revnumber> <date>21 March 2016</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, test cleanups</revremark>"
"authorinitials> <revremark>correção de erros, limpezas de testes</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:95
+#: C/index.docbook:101
msgid ""
"<revnumber>1.24</revnumber> <date>29 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fix</revremark>"
"authorinitials> <revremark>correção de erros</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:101
+#: C/index.docbook:107
msgid ""
"<revnumber>1.23</revnumber> <date>17 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fix</revremark>"
"authorinitials> <revremark>correção de erros</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:107
+#: C/index.docbook:113
msgid ""
"<revnumber>1.22</revnumber> <date>07 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, dropping deprecated features</"
"obsoletas</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:113
+#: C/index.docbook:119
msgid ""
"<revnumber>1.21</revnumber> <date>17 Jul 2014</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, dropping deprecated features</"
"obsoletas</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:119
+#: C/index.docbook:125
msgid ""
"<revnumber>1.20</revnumber> <date>16 Feb 2014</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, markdown support, style improvements</"
"no estilo</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:125
+#: C/index.docbook:131
msgid ""
"<revnumber>1.19</revnumber> <date>05 Jun 2013</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes</revremark>"
"authorinitials> <revremark>correção de erros</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:131
+#: C/index.docbook:137
msgid ""
"<revnumber>1.18</revnumber> <date>14 Sep 2011</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, speedups, markdown support</revremark>"
"markdown</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:137
+#: C/index.docbook:143
msgid ""
"<revnumber>1.17</revnumber> <date>26 Feb 2011</date> <authorinitials>sk</"
"authorinitials> <revremark>urgent bug fix update</revremark>"
"revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:143
+#: C/index.docbook:149
msgid ""
"<revnumber>1.16</revnumber> <date>14 Jan 2011</date> <authorinitials>sk</"
"authorinitials> <revremark>bugfixes, layout improvements</revremark>"
"authorinitials> <revremark>correção de erros, melhorias no layout</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:149
+#: C/index.docbook:155
msgid ""
"<revnumber>1.15</revnumber> <date>21 May 2010</date> <authorinitials>sk</"
"authorinitials> <revremark>bug and regression fixes</revremark>"
"authorinitials> <revremark>correção de erros e regressões</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:155
+#: C/index.docbook:161
msgid ""
"<revnumber>1.14</revnumber> <date>28 March 2010</date> <authorinitials>sk</"
"authorinitials> <revremark>bugfixes and performance improvements</revremark>"
msgstr ""
-"<revnumber>1.14</revnumber> <date>28 Mar 2010</date> <authorinitials>sk</"
-"authorinitials> <revremark>Correção de erro e melhorias na performance</"
-"revremark>"
+"<revnumber>1.14</revnumber> <date>28 Mar 2010</date> "
+"<authorinitials>sk</authorinitials> <revremark>Correção de erro e melhorias "
+"na performance</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:161
+#: C/index.docbook:167
msgid ""
"<revnumber>1.13</revnumber> <date>18 December 2009</date> "
"<authorinitials>sk</authorinitials> <revremark>broken tarball update</"
"revremark>"
msgstr ""
-"<revnumber>1.13</revnumber> <date>18 Dez 2009</date> <authorinitials>sk</"
-"authorinitials> <revremark>atualização de tarball defeituoso</revremark>"
+"<revnumber>1.13</revnumber> <date>18 Dez 2009</date> "
+"<authorinitials>sk</authorinitials> <revremark>atualização de tarball "
+"defeituoso</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:167
+#: C/index.docbook:173
msgid ""
"<revnumber>1.12</revnumber> <date>18 December 2009</date> "
"<authorinitials>sk</authorinitials> <revremark>new tool features and "
"bugfixes</revremark>"
msgstr ""
-"<revnumber>1.12</revnumber> <date>18 Dez 2009</date> <authorinitials>sk</"
-"authorinitials> <revremark>novas funcionalidades da ferramenta e correção de "
-"erros</revremark>"
+"<revnumber>1.12</revnumber> <date>18 Dez 2009</date> "
+"<authorinitials>sk</authorinitials> <revremark>novas funcionalidades da "
+"ferramenta e correção de erros</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:173
+#: C/index.docbook:179
msgid ""
"<revnumber>1.11</revnumber> <date>16 November 2008</date> "
"<authorinitials>mal</authorinitials> <revremark>GNOME doc-utils migration</"
"revremark>"
msgstr ""
-"<revnumber>1.11</revnumber> <date>16 Nov 2008</date> <authorinitials>mal</"
-"authorinitials> <revremark>Migração do GNOME doc-utils</revremark>"
+"<revnumber>1.11</revnumber> <date>16 Nov 2008</date> "
+"<authorinitials>mal</authorinitials> <revremark>migração do GNOME doc-"
+"utils</revremark>"
#. (itstool) path: chapter/title
-#: C/index.docbook:186
+#: C/index.docbook:192
msgid "Introduction"
msgstr "Introdução"
#. (itstool) path: chapter/para
-#: C/index.docbook:188
+#: C/index.docbook:194
msgid ""
"This chapter introduces GTK-Doc and gives an overview of what it is and how "
"it is used."
"usado."
#. (itstool) path: sect1/title
-#: C/index.docbook:194
+#: C/index.docbook:200
msgid "What is GTK-Doc?"
msgstr "O que é GTK-Doc?"
#. (itstool) path: sect1/para
-#: C/index.docbook:196
+#: C/index.docbook:202
msgid ""
"GTK-Doc is used to document C code. It is typically used to document the "
"public API of libraries, such as the GTK+ and GNOME libraries. But it can "
"GNOME. Mas ele também pode ser usado para documentar código de aplicativos."
#. (itstool) path: sect1/title
-#: C/index.docbook:204
+#: C/index.docbook:210
msgid "How Does GTK-Doc Work?"
msgstr "Como o GTK-Doc funciona?"
#. (itstool) path: sect1/para
-#: C/index.docbook:206
+#: C/index.docbook:212
msgid ""
"GTK-Doc works by using documentation of functions placed inside the source "
"files in specially-formatted comment blocks, or documentation added to the "
"arquivos de cabeçalho; ele não irá produzir saída para funções estáticas)."
#. (itstool) path: sect1/para
-#: C/index.docbook:213
+#: C/index.docbook:219
+#| msgid ""
+#| "GTK-Doc consists of a number of perl scripts, each performing a different "
+#| "step in the process."
msgid ""
-"GTK-Doc consists of a number of perl scripts, each performing a different "
+"GTK-Doc consists of a number of python scripts, each performing a different "
"step in the process."
msgstr ""
-"GTK-Doc consiste de um número de scripts perl, cada um executando uma etapa "
-"diferente no processo."
+"GTK-Doc consiste de um número de scripts em Python, cada um executando uma "
+"etapa diferente no processo."
#. (itstool) path: sect1/para
-#: C/index.docbook:218
+#: C/index.docbook:224
msgid "There are 5 main steps in the process:"
msgstr "Há 5 etapas principais no processo:"
#. (itstool) path: listitem/para
-#: C/index.docbook:225
+#: C/index.docbook:231
msgid ""
"<guilabel>Writing the documentation.</guilabel> The author fills in the "
"source files with the documentation for each function, macro, union etc. (In "
"que não é mais recomendado)."
#. (itstool) path: listitem/para
-#: C/index.docbook:235
+#: C/index.docbook:241
msgid ""
"<guilabel>Gathering information about the code.</guilabel> "
"<application>gtkdoc-scan</application> scans the header files of the code "
"txt</filename> no <filename><módulo>-overrides.txt</filename>."
#. (itstool) path: listitem/para
-#: C/index.docbook:252
+#: C/index.docbook:258
msgid ""
"<application>gtkdoc-scangobj</application> can also be used to dynamically "
"query a library about any GObject subclasses it exports. It saves "
"fornece."
#. (itstool) path: listitem/para
-#: C/index.docbook:258
+#: C/index.docbook:264
msgid ""
"<application>gtkdoc-scanobj</application> should not be used anymore. It was "
"needed in the past when GObject was still GtkObject inside gtk+."
"era necessário no passado, quando GObject ainda era GtkObject dentro do gtk+."
#. (itstool) path: listitem/para
-#: C/index.docbook:265
+#: C/index.docbook:271
msgid ""
"<guilabel>Generating the XML and HTML/PDF.</guilabel> <application>gtkdoc-"
"mkdb</application> turns the template files into XML files in the <filename "
"documentos dos dados de introspecção e dos fontes."
#. (itstool) path: listitem/para
-#: C/index.docbook:274
+#: C/index.docbook:280
msgid ""
"<application>gtkdoc-mkhtml</application> turns the XML files into HTML files "
"in the <filename class=\"directory\">html/</filename> subdirectory. Likewise "
"pacote>.pdf</filename>."
#. (itstool) path: listitem/para
-#: C/index.docbook:280
+#: C/index.docbook:286
msgid ""
"Files in <filename class=\"directory\">xml/</filename> and <filename class="
"\"directory\">html/</filename> directories are always overwritten. One "
"devem ser editados manualmente."
#. (itstool) path: listitem/para
-#: C/index.docbook:288
+#: C/index.docbook:294
msgid ""
"<guilabel>Fixing up cross-references between documents.</guilabel> After "
"installing the HTML files, <application>gtkdoc-fixxref</application> can be "
"volta para links locais (onde aquelas documentações estão instaladas)."
#. (itstool) path: sect1/title
-#: C/index.docbook:306
+#: C/index.docbook:312
msgid "Getting GTK-Doc"
msgstr "Obtendo GTK-Doc"
#. (itstool) path: sect2/title
-#: C/index.docbook:309
+#: C/index.docbook:315
msgid "Requirements"
msgstr "Requisitos"
#. (itstool) path: sect2/para
-#: C/index.docbook:310
-msgid "<guilabel>Perl v5</guilabel> - the main scripts are in Perl."
-msgstr "<guilabel>Perl v5</guilabel> - os scripts principais são Perl."
+#: C/index.docbook:316
+#| msgid "<guilabel>Perl v5</guilabel> - the main scripts are in Perl."
+msgid ""
+"<guilabel>python 2/3</guilabel> - the main scripts are written in python."
+msgstr ""
+"<guilabel>python 2/3</guilabel> - os scripts principais são escritos em "
+"Python."
#. (itstool) path: sect2/para
-#: C/index.docbook:313
+#: C/index.docbook:319
msgid ""
"<guilabel>xsltproc</guilabel> - the xslt processor from libxslt <ulink url="
"\"http://xmlsoft.org/XSLT/\" type=\"http\">xmlsoft.org/XSLT/</ulink>"
"\"http://xmlsoft.org/XSLT/\" type=\"http\">xmlsoft.org/XSLT/</ulink>"
#. (itstool) path: sect2/para
-#: C/index.docbook:317
+#: C/index.docbook:323
msgid ""
"<guilabel>docbook-xsl</guilabel> - the docbook xsl stylesheets <ulink url="
"\"http://sourceforge.net/projects/docbook/files/docbook-xsl/\" type=\"http"
"\"http\">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>"
#. (itstool) path: sect2/para
-#: C/index.docbook:321
-msgid "<guilabel>Python</guilabel> - optional - for gtkdoc-depscan"
-msgstr "<guilabel>Python</guilabel> - opcional - para gtkdoc-depscan"
-
-#. (itstool) path: sect2/para
-#: C/index.docbook:324
+#: C/index.docbook:327
msgid ""
"One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> "
"or <guilabel>vim</guilabel> - optional - used for syntax highlighting of "
"sintaxe de exemplos"
#. (itstool) path: sect1/title
-#: C/index.docbook:332
+#: C/index.docbook:335
msgid "About GTK-Doc"
msgstr "Sobre GTK-Doc"
#. (itstool) path: sect1/para
-#: C/index.docbook:334 C/index.docbook:348
+#: C/index.docbook:337 C/index.docbook:351
msgid "(FIXME)"
msgstr "(CORRIJA-ME)"
#. (itstool) path: sect1/para
-#: C/index.docbook:338
+#: C/index.docbook:341
msgid ""
"(History, authors, web pages, mailing list, license, future plans, "
"comparison with other similar systems.)"
"futuros, comparação com outros sistemas similares.)"
#. (itstool) path: sect1/title
-#: C/index.docbook:346
+#: C/index.docbook:349
msgid "About this Manual"
msgstr "Sobre este manual"
#. (itstool) path: sect1/para
-#: C/index.docbook:352
+#: C/index.docbook:355
msgid "(who it is meant for, where you can get it, license)"
msgstr "(pra quem ele serve, onde você pode obtê-lo, licença)"
#. (itstool) path: chapter/title
-#: C/index.docbook:361
+#: C/index.docbook:364
msgid "Setting up your project"
msgstr "Preparando seu projeto"
#. (itstool) path: chapter/para
-#: C/index.docbook:363
+#: C/index.docbook:366
msgid ""
"The next sections describe what steps to perform to integrate GTK-Doc into "
"your project. Theses sections assume we work on a project called 'meep'. "
"uma configuração de compilação diferente."
#. (itstool) path: sect1/title
-#: C/index.docbook:374
+#: C/index.docbook:377
msgid "Setting up a skeleton documentation"
msgstr "Preparando o esqueleto de uma documentação"
#. (itstool) path: sect1/para
-#: C/index.docbook:376
+#: C/index.docbook:379
msgid ""
"Under your top-level project directory create folders called docs/reference "
"(this way you can also have docs/help for end-user documentation). It is "
"obrigatória."
#. (itstool) path: example/title
-#: C/index.docbook:385
+#: C/index.docbook:388
msgid "Example directory structure"
msgstr "Exemplo de estrutura de diretórios"
#. (itstool) path: example/programlisting
-#: C/index.docbook:386
+#: C/index.docbook:389
#, no-wrap
msgid ""
"\n"
" meeper/\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:383
+#: C/index.docbook:386
msgid "This can then look as shown below: <_:example-1/>"
msgstr "Isto pode, então, parecer como exibido abaixo: <_:example-1/>"
#. (itstool) path: sect1/title
#. (itstool) path: example/title
-#: C/index.docbook:401 C/index.docbook:408
+#: C/index.docbook:404 C/index.docbook:411
msgid "Integration with autoconf"
msgstr "Integração com autoconf"
#. (itstool) path: sect1/para
-#: C/index.docbook:403
+#: C/index.docbook:406
msgid ""
"Very easy! Just add one line to your <filename>configure.ac</filename> "
"script."
"filename>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:409
+#: C/index.docbook:412
#, no-wrap
msgid ""
"\n"
"GTK_DOC_CHECK([1.14],[--flavour no-tmpl])\n"
#. (itstool) path: example/title
-#: C/index.docbook:421
+#: C/index.docbook:424
msgid "Keep gtk-doc optional"
msgstr "Mantenha o gtk-doc como opcional"
#. (itstool) path: example/programlisting
-#: C/index.docbook:422
+#: C/index.docbook:425
#, no-wrap
msgid ""
"\n"
"])\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:416
+#: C/index.docbook:419
msgid ""
"This will require all developers to have gtk-doc installed. If it is okay "
"for your project to have optional api-doc build setup, you can solve this as "
"<function>GTK_DOC_CHECK</function> no começo de uma linha. <_:example-1/>"
#. (itstool) path: sect1/para
-#: C/index.docbook:433
+#: C/index.docbook:436
msgid ""
"The first argument is used to check for the gtkdocversion at configure time. "
"The 2nd, optional argument is used by <application>gtkdocize</application>. "
"também adiciona várias opções de configuração:"
#. (itstool) path: listitem/para
-#: C/index.docbook:439
+#: C/index.docbook:442
msgid "--with-html-dir=PATH : path to installed docs"
msgstr "--with-html-dir=CAMINHO : caminho para as documentações instaladas"
#. (itstool) path: listitem/para
-#: C/index.docbook:440
+#: C/index.docbook:443
msgid "--enable-gtk-doc : use gtk-doc to build documentation [default=no]"
msgstr "--enable-gtk-doc : usa gtk-doc para compilar documentação [padrão=no]"
#. (itstool) path: listitem/para
-#: C/index.docbook:441
+#: C/index.docbook:444
msgid ""
"--enable-gtk-doc-html : build documentation in html format [default=yes]"
msgstr ""
"--enable-gtk-doc-html : compila documentação em formato html [padrão=sim]"
#. (itstool) path: listitem/para
-#: C/index.docbook:442
+#: C/index.docbook:445
msgid "--enable-gtk-doc-pdf : build documentation in pdf format [default=no]"
msgstr ""
"--enable-gtk-doc-pdf : compila documentação em formato pdf [padrão=não]"
#. (itstool) path: important/para
-#: C/index.docbook:446
+#: C/index.docbook:449
msgid ""
"GTK-Doc is disabled by default! Remember to pass the option <option>'--"
"enable-gtk-doc'</option> to the next <filename>configure</filename> run. "
"que faz sentido para usuários, mas não para desenvolvedores)."
#. (itstool) path: sect1/para
-#: C/index.docbook:454
-#| msgid ""
-#| "Furthermore it is recommended that you have the following line inside you "
-#| "<filename>configure.ac</filename> script. This allows "
-#| "<application>gtkdocize</application> to automatically copy the macro "
-#| "definition for <function>GTK_DOC_CHECK</function> to your project."
+#: C/index.docbook:457
msgid ""
"Furthermore it is recommended that you have the following line inside your "
"<filename>configure.ac</filename> script. This allows "
"macro para <function>GTK_DOC_CHECK</function> para o seu projeto."
#. (itstool) path: example/title
-#: C/index.docbook:462
+#: C/index.docbook:465
msgid "Preparation for gtkdocize"
msgstr "Preparação para gtkdocize"
#. (itstool) path: example/programlisting
-#: C/index.docbook:463
+#: C/index.docbook:466
#, no-wrap
msgid ""
"\n"
"AC_CONFIG_MACRO_DIR(m4)\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:468
+#: C/index.docbook:471
msgid ""
"After all changes to <filename>configure.ac</filename> are made, update the "
"<filename>configure</filename> file. This can be done by re-running "
"executando novamente <code>autoreconf -i</code> ou <code>autogen.sh</code>."
#. (itstool) path: sect1/title
-#: C/index.docbook:476
+#: C/index.docbook:479
msgid "Integration with automake"
msgstr "Integração com automake"
#. (itstool) path: sect1/para
-#: C/index.docbook:478
+#: C/index.docbook:481
msgid ""
"First copy the <filename>Makefile.am</filename> from the <filename class="
"\"directory\">examples</filename> sub directory of the <ulink url=\"https://"
"documentação, repita isso para cada um."
#. (itstool) path: sect1/para
-#: C/index.docbook:489
+#: C/index.docbook:492
msgid ""
"The next step is to edit the settings inside the <filename>Makefile.am</"
"filename>. All the settings have a comment above that describes their "
"suporte a <option>--help</option> pra listar os parâmetros disponíveis."
#. (itstool) path: sect1/title
-#: C/index.docbook:503
+#: C/index.docbook:506
msgid "Integration with autogen"
msgstr "Integração com autogen"
#. (itstool) path: sect1/para
-#: C/index.docbook:505
+#: C/index.docbook:508
msgid ""
"Most projects will have an <filename>autogen.sh</filename> script to setup "
"the build infrastructure after a checkout from version control system (such "
"O gtkdocize deveria ser executado antes de autoheader, automake ou autoconf."
#. (itstool) path: example/title
-#: C/index.docbook:514
+#: C/index.docbook:517
msgid "Running gtkdocize from autogen.sh"
msgstr "Executando gtkdocize no autogen.sh"
#. (itstool) path: example/programlisting
-#: C/index.docbook:515
+#: C/index.docbook:518
#, no-wrap
msgid ""
"\n"
"gtkdocize || exit 1\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:521
+#: C/index.docbook:524
msgid ""
"When running <application>gtkdocize</application> it copies <filename>gtk-"
"doc.make</filename> to your project root (or any directory specified by the "
"<application>gtkdocize</application>."
#. (itstool) path: sect1/para
-#: C/index.docbook:530
+#: C/index.docbook:533
msgid ""
"Historically GTK-Doc was generating template files where developers entered "
"the docs. This turned out to be not so good (e.g. the need for having "
#. (itstool) path: sect1/title
#. (itstool) path: example/title
-#: C/index.docbook:547 C/index.docbook:564
+#: C/index.docbook:550 C/index.docbook:567
msgid "Running the doc build"
msgstr "Executando a compilação da documentação"
#. (itstool) path: sect1/para
-#: C/index.docbook:549
+#: C/index.docbook:552
msgid ""
"After the previous steps it's time to run the build. First we need to rerun "
"<filename>autogen.sh</filename>. If this script runs configure for you, then "
"<filename>configure</filename> com esta opção em seguida."
#. (itstool) path: sect1/para
-#: C/index.docbook:556
+#: C/index.docbook:559
msgid ""
"The first make run generates several additional files in the doc-"
"directories. The important ones are: <filename><package>.types</"
"<filename><pacote>-sections.txt</filename>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:565
+#: C/index.docbook:568
#, no-wrap
msgid ""
"\n"
"make\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:571
+#: C/index.docbook:574
msgid ""
"Now you can point your browser to <filename>docs/reference/<package>/"
"index.html</filename>. Yes, it's a bit disappointing still. But hang-on, "
"páginas com vida."
#. (itstool) path: sect1/title
-#: C/index.docbook:579
+#: C/index.docbook:582
msgid "Integration with version control systems"
msgstr "Integração com sistemas de controle de versão"
#. (itstool) path: sect1/para
-#: C/index.docbook:581
+#: C/index.docbook:584
msgid ""
"As a rule of thumb, it's the files you edit which should go under version "
"control. For typical projects it's these files: <filename><package>."
"filename>, <filename>Makefile.am</filename>."
#. (itstool) path: sect1/para
-#: C/index.docbook:589
+#: C/index.docbook:592
msgid ""
"Files in the <filename>xml/</filename> and <filename>html/</filename> "
"directories should not go under version control. Neither should any of the "
"deveriam entrar arquivos <filename>.stamp</filename>."
#. (itstool) path: sect1/title
-#: C/index.docbook:597
+#: C/index.docbook:600
msgid "Integration with plain makefiles or other build systems"
msgstr "Integração com makefiles simples ou outros sistemas de compilação"
#. (itstool) path: sect1/para
-#: C/index.docbook:599
+#: C/index.docbook:602
msgid ""
"In the case one does not want to use automake and therefore <filename>gtk-"
"doc.mak</filename> one will need to call the gtkdoc tools in the right order "
"correta nos makefiles devidos (ou outras ferramentas de compilação)."
#. (itstool) path: example/title
-#: C/index.docbook:606
+#: C/index.docbook:609
msgid "Documentation build steps"
msgstr "Etapas de compilação da documentação"
#. (itstool) path: example/programlisting
-#: C/index.docbook:607
+#: C/index.docbook:610
#, no-wrap
msgid ""
"\n"
"gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:621
+#: C/index.docbook:624
msgid ""
"One will need to look at the <filename>Makefile.am</filename> and "
"<filename>gtk-doc.mak</filename> to pick the extra options needed."
"doc.mak</filename> para obter as opções extras necessárias."
#. (itstool) path: sect1/title
-#: C/index.docbook:628
+#: C/index.docbook:631
msgid "Integration with CMake build systems"
msgstr "Integração com sistemas de compilação CMake"
#. (itstool) path: sect1/para
-#: C/index.docbook:630
+#: C/index.docbook:633
msgid ""
"GTK-Doc now provides a <filename>GtkDocConfig.cmake</filename> module (and "
"the corresponding <filename>GtkDocConfigVersion.cmake</filename> module). "
"em seu arquivo <filename>CMakeLists.txt</filename>."
#. (itstool) path: example/title
-#: C/index.docbook:640
+#: C/index.docbook:643
msgid "Example of using GTK-Doc from CMake"
msgstr "Exemplo de uso do GTK-Doc no CMake"
#. (itstool) path: example/programlisting
-#: C/index.docbook:641
+#: C/index.docbook:644
#, no-wrap
msgid ""
"\n"
" DESTINATION ${CMAKE_INSTALL_DOCDIR})\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:638
+#: C/index.docbook:641
msgid "The following example shows how to use this command. <_:example-1/>"
msgstr "O exemplo a seguir mostra como usar este comando. <_:example-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:666
+#: C/index.docbook:669
msgid "Documenting the code"
msgstr "Documentando o código"
#. (itstool) path: chapter/para
-#: C/index.docbook:668
+#: C/index.docbook:671
msgid ""
"GTK-Doc uses source code comment with a special syntax for code "
"documentation. Further it retrieves information about your project structure "
"descobrir todas as informações sobre a sintaxe dos comentários."
#. (itstool) path: note/title
-#: C/index.docbook:676
+#: C/index.docbook:679
msgid "Documentation placement"
msgstr "Localização da documentação"
#. (itstool) path: note/para
-#: C/index.docbook:677
+#: C/index.docbook:680
msgid ""
"In the past most documentation had to be filled into files residing inside "
"the <filename>tmpl</filename> directory. This has the disadvantages that the "
"versão."
#. (itstool) path: note/para
-#: C/index.docbook:683
+#: C/index.docbook:686
msgid ""
"The avoid the aforementioned problems we suggest putting the documentation "
"inside the sources. This manual will only describe this way of documenting "
"descrever esta forma de documentar código."
#. (itstool) path: example/title
-#: C/index.docbook:694 C/index.docbook:720
+#: C/index.docbook:697 C/index.docbook:723
msgid "GTK-Doc comment block"
msgstr "Bloco de comentário do GTK-Doc"
#. (itstool) path: example/programlisting
-#: C/index.docbook:695
+#: C/index.docbook:698
#, no-wrap
msgid ""
"\n"
"#endif\n"
#. (itstool) path: chapter/para
-#: C/index.docbook:690
+#: C/index.docbook:693
msgid ""
"The scanner can handle the majority of C headers fine. In the case of "
"receiving warnings from the scanner that look like a special case, one can "
"pode-se informar ao GTK-Doc para ignorá-los. <_:example-1/>"
#. (itstool) path: note/title
-#: C/index.docbook:704
+#: C/index.docbook:707
msgid "Limitations"
msgstr "Limitações"
#. (itstool) path: note/para
-#: C/index.docbook:705
+#: C/index.docbook:708
msgid ""
"Note, that GTK-Doc's supports <code>#ifndef(__GTK_DOC_IGNORE__)</code> but "
"not <code>#if !defined(__GTK_DOC_IGNORE__)</code> or other combinations."
"combinações."
#. (itstool) path: sect1/title
-#: C/index.docbook:715
+#: C/index.docbook:718
msgid "Documentation comments"
msgstr "Comentários de documentação"
#. (itstool) path: example/programlisting
-#: C/index.docbook:721
+#: C/index.docbook:724
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:717
+#: C/index.docbook:720
msgid ""
"A multiline comment that starts with an additional '*' marks a documentation "
"block that will be processed by the GTK-Doc tools. <_:example-1/>"
# Ocultei o TODO da tradução. Para que server? :/
#. (itstool) path: sect1/para
-#: C/index.docbook:730
+#: C/index.docbook:733
msgid ""
"The 'identifier' is one line with the name of the item the comment is "
"related to. The syntax differs a little depending on the item. (TODO add "
"relacionado. A sintaxe difere um pouco dependendo do item."
#. (itstool) path: sect1/para
-#: C/index.docbook:736
+#: C/index.docbook:739
msgid ""
"The 'documentation' block is also different for each symbol type. Symbol "
"types that get parameters such as functions or macros have the parameter "
"espaço). Isso é útil em textos pré-formatados (listagens de código)."
#. (itstool) path: listitem/para
-#: C/index.docbook:753
+#: C/index.docbook:756
msgid ""
"What it is: The name for a class or function can sometimes be misleading for "
"people coming from a different background."
"entendimento equivocado pessoas com experiências diferentes."
#. (itstool) path: listitem/para
-#: C/index.docbook:759
+#: C/index.docbook:762
msgid ""
"What it does: Tell about common uses. Put it in relation with the other API."
msgstr ""
"O que isso faz: Fale sobre usos comuns. Coloque em relação com a outra API."
#. (itstool) path: tip/para
-#: C/index.docbook:749
+#: C/index.docbook:752
msgid "When documenting code, describe two aspects: <_:itemizedlist-1/>"
msgstr "Ao documentar um código, descreva dois aspectos: <_:itemizedlist-1/>"
#. (itstool) path: listitem/para
-#: C/index.docbook:774
+#: C/index.docbook:777
msgid "Use function() to refer to functions or macros which take arguments."
msgstr "Use function() para referir às funções ou macros que levam argumentos."
#. (itstool) path: listitem/para
-#: C/index.docbook:779
+#: C/index.docbook:782
msgid ""
"Use @param to refer to parameters. Also use this when referring to "
"parameters of other functions, related to the one being described."
"parâmetros de outras funções, relacionadas àquele sendo descrito."
#. (itstool) path: listitem/para
-#: C/index.docbook:785
+#: C/index.docbook:788
msgid "Use %constant to refer to a constant, e.g. %G_TRAVERSE_LEAFS."
msgstr "Use %constant para se referir a uma constante, ex.: %G_TRAVERSE_LEAFS."
#. (itstool) path: listitem/para
-#: C/index.docbook:790
+#: C/index.docbook:793
msgid ""
"Use #symbol to refer to other types of symbol, e.g. structs and enums and "
"macros which don't take arguments."
"e macros que não levam argumentos."
#. (itstool) path: listitem/para
-#: C/index.docbook:796
+#: C/index.docbook:799
msgid "Use #Object::signal to refer to a GObject signal."
msgstr "Use #Object::signal para se referir a um sinal de GObject."
#. (itstool) path: listitem/para
-#: C/index.docbook:801
+#: C/index.docbook:804
msgid "Use #Object:property to refer to a GObject property."
msgstr "Use #Object:property para se referir a uma propriedade de GObject."
#. (itstool) path: listitem/para
-#: C/index.docbook:806
+#: C/index.docbook:809
msgid ""
"Use #Struct.field to refer to a field inside a structure and #GObjectClass."
"foo_bar() to refer to a vmethod."
"#GObjectClass.foo_bar() para se referir a um vmethod."
#. (itstool) path: sect1/para
-#: C/index.docbook:768
+#: C/index.docbook:771
msgid ""
"One advantage of hyper-text over plain-text is the ability to have links in "
"the document. Writing the correct markup for a link can be tedious though. "
"itemizedlist-1/>"
#. (itstool) path: tip/para
-#: C/index.docbook:815
+#: C/index.docbook:818
msgid ""
"If you need to use the special characters '<', '>', '()', '@', '%', or "
"'#' in your documentation without GTK-Doc changing them you can use the XML "
"uma contrabarra “\\”."
#. (itstool) path: sect1/para
-#: C/index.docbook:824
+#: C/index.docbook:827
msgid ""
"DocBook can do more than just links. One can also have lists, examples, "
"headings, and images. As of version 1.20, the preferred way is to use a "
"linhas começando com um traço."
#. (itstool) path: sect1/para
-#: C/index.docbook:835
+#: C/index.docbook:838
msgid ""
"While markdown is now preferred one can mix both. One limitation here is "
"that one can use docbook xml within markdown, but markdown within docbook "
"suporte a markdown no docbook xml."
#. (itstool) path: sect1/para
-#: C/index.docbook:841
+#: C/index.docbook:844
msgid ""
"In older GTK-Doc releases, if you need support for additional formatting, "
"you would need to enable the usage of docbook XML tags inside doc-comments "
"symbol> dentro de <filename>Makefile.am</filename>."
#. (itstool) path: example/title
-#: C/index.docbook:850
+#: C/index.docbook:853
msgid "GTK-Doc comment block using Markdown"
msgstr "Bloco de comentário do GTK-Doc usando Markdown"
#. (itstool) path: example/programlisting
-#: C/index.docbook:851
+#: C/index.docbook:854
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:890
+#: C/index.docbook:893
msgid ""
"More examples of what markdown tags are supported can be found in the <ulink "
"url=\"https://wiki.gnome.org/Projects/GTK%2B/DocumentationSyntax/Markdown"
"Markdown\">Referência de sintaxe de markdown de documentação</ulink>."
#. (itstool) path: tip/para
-#: C/index.docbook:896
+#: C/index.docbook:899
msgid ""
"As already mentioned earlier GTK-Doc is for documenting public API. Thus one "
"cannot write documentation for static symbols. Nevertheless it is good to "
"comentário e inserir o nome do símbolo no lugar correto do arquivo e seções."
#. (itstool) path: sect1/title
-#: C/index.docbook:910
+#: C/index.docbook:913
msgid "Documenting sections"
msgstr "Documentando seções"
#. (itstool) path: sect1/para
-#: C/index.docbook:912
+#: C/index.docbook:915
msgid ""
"Each section of the documentation contains information about one class or "
"module. To introduce the component one can write a section block. The short "
"os @fields são opcionais."
#. (itstool) path: example/title
-#: C/index.docbook:920
+#: C/index.docbook:923
msgid "Section comment block"
msgstr "Bloco de comentário de sessão"
#. (itstool) path: example/programlisting
-#: C/index.docbook:921
+#: C/index.docbook:924
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:940
+#: C/index.docbook:943
msgid "SECTION:<name>"
msgstr "SECTION:<nome>"
#. (itstool) path: listitem/para
-#: C/index.docbook:942
-#| msgid ""
-#| "The name links the section documentation to the respective part in the "
-#| "<filename><package>-sections.txt</filename> file. The name give "
-#| "here should match the <FILE> tag in the <filename><package>-"
-#| "sections.txt</filename> file."
+#: C/index.docbook:945
msgid ""
"The name links the section documentation to the respective part in the "
"<filename><package>-sections.txt</filename> file. The name given here "
msgstr ""
"O nome vincula a documentação da seção à respectiva parte do arquivo "
"<filename><pacote>-sections.txt</filename>. O nome informado aqui deve "
-"corresponder à tag <FILE> no arquivo "
-"<filename><pacote>-sections.txt</filename>."
+"corresponder à tag <FILE> no arquivo <filename><pacote>-sections."
+"txt</filename>."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:951
+#: C/index.docbook:954
msgid "@short_description"
msgstr "@short_description"
#. (itstool) path: listitem/para
-#: C/index.docbook:953
+#: C/index.docbook:956
msgid ""
"A one line description of the section, that later will appear after the "
"links in the TOC and at the top of the section page."
"no TOC (sumário) no topo da página da sessão."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:960
+#: C/index.docbook:963
msgid "@title"
msgstr "@title"
#. (itstool) path: listitem/para
-#: C/index.docbook:962
+#: C/index.docbook:965
msgid ""
"The section title defaults to <name> from the SECTION declaration. It "
"can be overridden with the @title field."
"pode ser sobrescrito com o campo @title."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:969
+#: C/index.docbook:972
msgid "@section_id"
msgstr "@section_id"
#. (itstool) path: listitem/para
-#: C/index.docbook:971
+#: C/index.docbook:974
msgid ""
"Overrides the use of title as a section identifier. For GObjects the <"
"title> is used as a section_id and for other sections it is <"
"MÓDULO>-<title>."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:979
+#: C/index.docbook:982
msgid "@see_also"
msgstr "@see_also"
#. (itstool) path: listitem/para
-#: C/index.docbook:981
+#: C/index.docbook:984
msgid "A list of symbols that are related to this section."
msgstr "Uma lista de símbolos que estão relacionados a esta sessão."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:987
+#: C/index.docbook:990
msgid "@stability"
msgstr "@stability"
#. (itstool) path: listitem/para
-#: C/index.docbook:994
+#: C/index.docbook:997
msgid ""
"Stable - The intention of a Stable interface is to enable arbitrary third "
"parties to develop applications to these interfaces, release them, and have "
"alterações incompatíveis sejam raras e que tenham fortes justificativas."
#. (itstool) path: listitem/para
-#: C/index.docbook:1006
+#: C/index.docbook:1009
msgid ""
"Unstable - Unstable interfaces are experimental or transitional. They are "
"typically used to give outside developers early access to new or rapidly "
"fontes de uma versão menor para a próxima."
#. (itstool) path: listitem/para
-#: C/index.docbook:1018
+#: C/index.docbook:1021
msgid ""
"Private - An interface that can be used within the GNOME stack itself, but "
"that is not documented for end-users. Such functions should only be used in "
"usadas nas formas especificadas e documentadas."
#. (itstool) path: listitem/para
-#: C/index.docbook:1027
+#: C/index.docbook:1030
msgid ""
"Internal - An interface that is internal to a module and does not require "
"end-user documentation. Functions that are undocumented are assumed to be "
"sendo “Interna”."
#. (itstool) path: listitem/para
-#: C/index.docbook:989
+#: C/index.docbook:992
msgid ""
"An informal description of the stability level this API has. We recommend "
"the use of one of these terms: <_:itemizedlist-1/>"
"recomendamos o uso de um desses termos: <_:itemizedlist-1/>"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1039
+#: C/index.docbook:1042
msgid "@include"
msgstr "@include"
#. (itstool) path: listitem/para
-#: C/index.docbook:1041
+#: C/index.docbook:1044
msgid ""
"The <literal>#include</literal> files to show in the section synopsis (a "
"comma separated list), overriding the global value from the <link linkend="
"Este item é opcional."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1050
+#: C/index.docbook:1053
msgid "@image"
msgstr "@image"
#. (itstool) path: listitem/para
-#: C/index.docbook:1052
+#: C/index.docbook:1055
msgid ""
"The image to display at the top of the reference page for this section. This "
"will often be some sort of a diagram to illustrate the visual appearance of "
"opcional."
#. (itstool) path: tip/para
-#: C/index.docbook:1063
+#: C/index.docbook:1066
msgid ""
"To avoid unnecessary recompilation after doc-changes put the section docs "
"into the c-source where possible."
"inseridas nas documentações de seção no fonte em C onde possível."
#. (itstool) path: sect1/title
-#: C/index.docbook:1072
+#: C/index.docbook:1075
msgid "Documenting symbols"
msgstr "Documentando símbolos"
#. (itstool) path: sect1/para
-#: C/index.docbook:1074
+#: C/index.docbook:1077
msgid ""
"Each symbol (function, macro, struct, enum, signal and property) is "
"documented in a separate block. The block is best placed close to the "
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1082 C/index.docbook:1148
+#: C/index.docbook:1085 C/index.docbook:1151
msgid "General tags"
msgstr "Tags gerais"
#. (itstool) path: sect2/para
-#: C/index.docbook:1084
+#: C/index.docbook:1087
msgid ""
"You can add versioning information to all documentation elements to tell "
"when an API was introduced, or when it was deprecated."
"tornou obsoleta."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1089
+#: C/index.docbook:1092
msgid "Versioning Tags"
msgstr "Tags de versionamento"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1090
+#: C/index.docbook:1093
msgid "Since:"
msgstr "Since:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1092
+#: C/index.docbook:1095
msgid "Description since which version of the code the API is available."
msgstr "Descrição de desde qual versão do código a API está disponível."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1097
+#: C/index.docbook:1100
msgid "Deprecated:"
msgstr "Deprecated:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1099
+#: C/index.docbook:1102
msgid ""
"Paragraph denoting that this function should no be used anymore. The "
"description should point the reader to the new API."
"deveria apontar o leitor para a nova API."
#. (itstool) path: sect2/para
-#: C/index.docbook:1107
+#: C/index.docbook:1110
msgid ""
"You can also add stability information to all documentation elements to "
"indicate whether API stability is guaranteed for them for all future minor "
"garantida para eles para futuros lançamentos menores do projeto."
#. (itstool) path: sect2/para
-#: C/index.docbook:1113
+#: C/index.docbook:1116
msgid ""
"The default stability level for all documentation elements can be set by "
"passing the <option>--default-stability</option> argument to "
"<application>gtkdoc-mkdb</application> com um dos balores abaixo."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1119
+#: C/index.docbook:1122
msgid "Stability Tags"
msgstr "Tags de estabilidade"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1120
+#: C/index.docbook:1123
msgid "Stability: Stable"
msgstr "Stability: Stable"
#. (itstool) path: listitem/para
-#: C/index.docbook:1122
+#: C/index.docbook:1125
msgid ""
"Mark the element as stable. This is for public APIs which are guaranteed to "
"remain stable for all future minor releases of the project."
"garantida para todos os próximos lançamentos menores do projeto."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1129
+#: C/index.docbook:1132
msgid "Stability: Unstable"
msgstr "Stability: Unstable"
#. (itstool) path: listitem/para
-#: C/index.docbook:1131
+#: C/index.docbook:1134
msgid ""
"Mark the element as unstable. This is for public APIs which are released as "
"a preview before being stabilised."
"como versão de desenvolvimento antes de se tornar estável."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1137
+#: C/index.docbook:1140
msgid "Stability: Private"
msgstr "Stability: Private"
#. (itstool) path: listitem/para
-#: C/index.docbook:1139
+#: C/index.docbook:1142
msgid ""
"Mark the element as private. This is for interfaces which can be used by "
"tightly coupled modules, but not by arbitrary third parties."
"por um conjunto pequeno de módulos, mas não por terceiros."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1149
+#: C/index.docbook:1152
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1169 C/index.docbook:1179
+#: C/index.docbook:1172 C/index.docbook:1182
msgid "Annotations"
msgstr "Anotações"
#. (itstool) path: sect2/para
-#: C/index.docbook:1171
+#: C/index.docbook:1174
msgid ""
"Documentation blocks can contain annotation-tags. These tags will be "
"rendered with tooltips describing their meaning. The tags are used by "
"\">no wiki</ulink>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1180
+#: C/index.docbook:1183
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1201 C/index.docbook:1230
+#: C/index.docbook:1204 C/index.docbook:1233
msgid "Function comment block"
msgstr "Bloco de comentário de função"
#. (itstool) path: listitem/para
-#: C/index.docbook:1207
+#: C/index.docbook:1210
msgid ""
"Document whether returned objects, lists, strings, etc, should be freed/"
"unrefed/released."
"não referenciados/liberada."
#. (itstool) path: listitem/para
-#: C/index.docbook:1213
+#: C/index.docbook:1216
msgid "Document whether parameters can be NULL, and what happens if they are."
msgstr ""
"Documente se parâmetros pode ser NULL e o que acontece se eles o forem."
#. (itstool) path: listitem/para
-#: C/index.docbook:1218
+#: C/index.docbook:1221
msgid ""
"Mention interesting pre-conditions and post-conditions where appropriate."
msgstr ""
"Mencione pré-condições e pós-condições interessantes onde for apropriado."
#. (itstool) path: sect2/para
-#: C/index.docbook:1203 C/index.docbook:1289
+#: C/index.docbook:1206 C/index.docbook:1292
msgid "Please remember to: <_:itemizedlist-1/>"
msgstr "Por favor, lembre-se de: <_:itemizedlist-1/>"
#. (itstool) path: sect2/para
-#: C/index.docbook:1225
+#: C/index.docbook:1228
msgid ""
"Gtk-doc assumes all symbols (macros, functions) starting with '_' are "
"private. They are treated like static functions."
"são privadas. Elas são tratadas como funções estáticas."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1231
+#: C/index.docbook:1234
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: variablelist/title
-#: C/index.docbook:1252
+#: C/index.docbook:1255
msgid "Function tags"
msgstr "Tags de função"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1253 C/index.docbook:1460
+#: C/index.docbook:1256 C/index.docbook:1463
msgid "Returns:"
msgstr "Returns:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1255
+#: C/index.docbook:1258
msgid "Paragraph describing the returned result."
msgstr "Parágrafo descrevendo o resultado retornado."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1260
+#: C/index.docbook:1263
msgid "@...:"
msgstr "@...:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1262
+#: C/index.docbook:1265
msgid ""
"In case the function has variadic arguments, you should use this tag "
"(@Varargs: does also work for historic reasons)."
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1272 C/index.docbook:1274
+#: C/index.docbook:1275 C/index.docbook:1277
msgid "Property comment block"
msgstr "Bloco de comentário de propriedade"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1275
+#: C/index.docbook:1278
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1287 C/index.docbook:1306
+#: C/index.docbook:1290 C/index.docbook:1309
msgid "Signal comment block"
msgstr "Bloco de comentário de sinal"
#. (itstool) path: listitem/para
-#: C/index.docbook:1293
+#: C/index.docbook:1296
msgid ""
"Document when the signal is emitted and whether it is emitted before or "
"after other signals."
"sinais."
#. (itstool) path: listitem/para
-#: C/index.docbook:1299
+#: C/index.docbook:1302
msgid "Document what an application might do in the signal handler."
msgstr "Documente o que um aplicativo pode fazer no manipulador do sinal."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1307
+#: C/index.docbook:1310
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1324 C/index.docbook:1325
+#: C/index.docbook:1327 C/index.docbook:1328
msgid "Struct comment block"
msgstr "Bloco de comentário de struct"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1326
+#: C/index.docbook:1329
#, no-wrap
msgid ""
"\n"
"} FooWidget;\n"
#. (itstool) path: sect2/para
-#: C/index.docbook:1341
+#: C/index.docbook:1344
msgid ""
"Use <code>/*< private >*/</code> before the private struct fields you "
"want to hide. Use <code>/*< public >*/</code> for the reverse "
"comportamento inverso."
#. (itstool) path: sect2/para
-#: C/index.docbook:1347
+#: C/index.docbook:1350
msgid ""
"If the first field is \"g_iface\", \"parent_instance\" or \"parent_class\" "
"it will be considered private automatically and doesn't need to be mentioned "
"no bloco de comentário."
#. (itstool) path: sect2/para
-#: C/index.docbook:1353
+#: C/index.docbook:1356
msgid ""
"Struct comment blocks can also be used for GObjects and GObjectClasses. It "
"is usually a good idea to add a comment block for a class, if it has "
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1365 C/index.docbook:1366
+#: C/index.docbook:1368 C/index.docbook:1369
msgid "Enum comment block"
msgstr "Bloco de comentário de enum"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1367
+#: C/index.docbook:1370
#, no-wrap
msgid ""
"\n"
"} Alguma coisa;\n"
#. (itstool) path: sect2/para
-#: C/index.docbook:1384
+#: C/index.docbook:1387
msgid ""
"Use <code>/*< private >*/</code> before the private enum values you "
"want to hide. Use <code>/*< public >*/</code> for the reverse "
"comportamento inverso."
#. (itstool) path: sect1/title
-#: C/index.docbook:1395
+#: C/index.docbook:1398
msgid "Inline program documentation"
msgstr "Documentação de programa em-linha"
#. (itstool) path: sect1/para
-#: C/index.docbook:1396
+#: C/index.docbook:1399
msgid ""
"You can document programs and their commandline interface using inline "
"documentation."
"documentação em-linha."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1402
+#: C/index.docbook:1405
msgid "Tags"
msgstr "Tags"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1404
+#: C/index.docbook:1407
msgid "PROGRAM"
msgstr "PROGRAM"
#. (itstool) path: listitem/para
-#: C/index.docbook:1407
+#: C/index.docbook:1410
msgid "Defines the start of a program documentation."
msgstr "Define o início da documentação de um programa."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1414
+#: C/index.docbook:1417
msgid "@short_description:"
msgstr "@short_description:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1416
+#: C/index.docbook:1419
msgid "Defines a short description of the program. (Optional)"
msgstr "Define uma descrição breve do programa. (Opcional)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1423
+#: C/index.docbook:1426
msgid "@synopsis:"
msgstr "@synopsis:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1425
+#: C/index.docbook:1428
msgid ""
"Defines the arguments, or list of arguments that the program can take. "
"(Optional)"
"(Opcional)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1433
+#: C/index.docbook:1436
msgid "@see_also:"
msgstr "@see_also:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1435
+#: C/index.docbook:1438
msgid "See Also manual page section. (Optional)"
msgstr "A seção “Veja Também” (See Also) de páginas de manual. (Opcional)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1442
+#: C/index.docbook:1445
msgid "@arg:"
msgstr "@arg:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1444
+#: C/index.docbook:1447
msgid "Argument(s) passed to the program and their description. (Optional)"
msgstr "Argumento(s) passado(s) para o programa e sua descrição. (Opcional)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1451
+#: C/index.docbook:1454
msgid "Description:"
msgstr "Description:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1453
+#: C/index.docbook:1456
msgid "A longer description of the program."
msgstr "Um descrição mais longa do programa."
#. (itstool) path: listitem/para
-#: C/index.docbook:1462
+#: C/index.docbook:1465
msgid "Specificy what value(s) the program returns. (Optional)"
msgstr "Especifique quais valor(es) o programa retorna. (Opcional)"
#. (itstool) path: sect2/title
-#: C/index.docbook:1471
+#: C/index.docbook:1474
msgid "Example of program documentation."
msgstr "Exemplo de documentação de programa."
#. (itstool) path: example/title
-#: C/index.docbook:1472
+#: C/index.docbook:1475
msgid "Program documentation block"
msgstr "Bloco de documentação de programa"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1473
+#: C/index.docbook:1476
#, no-wrap
msgid ""
"\n"
"}\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:1499
+#: C/index.docbook:1502
msgid "Useful DocBook tags"
msgstr "Tags úteis do DocBook"
#. (itstool) path: sect1/para
-#: C/index.docbook:1501
+#: C/index.docbook:1504
msgid ""
"Here are some DocBook tags which are most useful when documenting the code."
msgstr ""
"documentado o código."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1510
+#: C/index.docbook:1513
#, no-wrap
msgid ""
"\n"
"<link linkend=\"glib-Hash-Tables\">Tabela de hashes</link>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1506
+#: C/index.docbook:1509
msgid ""
"To link to another section in the GTK docs: <_:informalexample-1/> The "
"linkend is the SGML/XML id on the top item of the page you want to link to. "
"convertidos em '-' para estar em conformidade com SGML/XML."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1523
+#: C/index.docbook:1526
#, no-wrap
msgid ""
"\n"
"<function>...</function>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1520
+#: C/index.docbook:1523
msgid ""
"To refer to an external function, e.g. a standard C function: <_:"
"informalexample-1/>"
"do C: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1532
+#: C/index.docbook:1535
#, no-wrap
msgid ""
"\n"
"</example>\n"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1543
+#: C/index.docbook:1546
#, no-wrap
msgid ""
"\n"
"</informalexample>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1529
+#: C/index.docbook:1532
msgid ""
"To include example code: <_:informalexample-1/> or possibly this, for very "
"short code fragments which don't need a title: <_:informalexample-2/> For "
"abreviação: |[ ... ]|"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1562
+#: C/index.docbook:1565
#, no-wrap
msgid ""
"\n"
"</itemizedlist>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1559
+#: C/index.docbook:1562
msgid "To include bulleted lists: <_:informalexample-1/>"
msgstr "Para incluir listas com marcadores: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1582
+#: C/index.docbook:1585
#, no-wrap
msgid ""
"\n"
"</note>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1579
+#: C/index.docbook:1582
msgid ""
"To include a note which stands out from the text: <_:informalexample-1/>"
msgstr "Para incluir uma nota que fique fora do texto: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1595
+#: C/index.docbook:1598
#, no-wrap
msgid ""
"\n"
"<type>unsigned char</type>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1592
+#: C/index.docbook:1595
msgid "To refer to a type: <_:informalexample-1/>"
msgstr "Para se referir a um tipo: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1604
+#: C/index.docbook:1607
#, no-wrap
msgid ""
"\n"
"<structname>XFontStruct</structname>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1601
+#: C/index.docbook:1604
msgid ""
"To refer to an external structure (not one described in the GTK docs): <_:"
"informalexample-1/>"
"GTK): <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1613
+#: C/index.docbook:1616
#, no-wrap
msgid ""
"\n"
"<structfield>len</structfield>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1610
+#: C/index.docbook:1613
msgid "To refer to a field of a structure: <_:informalexample-1/>"
msgstr "Para se referir a um campo de uma estrutura: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1622
+#: C/index.docbook:1625
#, no-wrap
msgid ""
"\n"
"<classname>GtkWidget</classname>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1619
+#: C/index.docbook:1622
msgid ""
"To refer to a class name, we could possibly use: <_:informalexample-1/> but "
"you'll probably be using #GtkWidget instead (to automatically create a link "
"veja <link linkend=\"documenting_syntax\">as abreviações</link>)."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1633
+#: C/index.docbook:1636
#, no-wrap
msgid ""
"\n"
"<emphasis>Isso é importante</emphasis>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1630
+#: C/index.docbook:1633
msgid "To emphasize text: <_:informalexample-1/>"
msgstr "Para enfatizar um texto: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1642
+#: C/index.docbook:1645
#, no-wrap
msgid ""
"\n"
"<filename>/home/usuario/documentos</filename>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1639
+#: C/index.docbook:1642
msgid "For filenames use: <_:informalexample-1/>"
msgstr "Para nome de arquivos use: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1651
+#: C/index.docbook:1654
#, no-wrap
msgid ""
"\n"
"<keycombo><keycap>Control</keycap><keycap>L</keycap></keycombo>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1648
+#: C/index.docbook:1651
msgid "To refer to keys use: <_:informalexample-1/>"
msgstr "Para se referir a chaves use: <_:informalexample-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:1661
+#: C/index.docbook:1664
msgid "Filling the extra files"
msgstr "Preenchendo os arquivos extras"
#. (itstool) path: chapter/para
-#: C/index.docbook:1663
+#: C/index.docbook:1666
msgid ""
"There are a couple of extra files, that need to be maintained along with the "
"inline source code comments: <filename><package>.types</filename>, "
"<filename><pacote>-sections.txt</filename>."
#. (itstool) path: sect1/title
-#: C/index.docbook:1672
+#: C/index.docbook:1675
msgid "Editing the types file"
msgstr "Editando o arquivo de tipos"
#. (itstool) path: sect1/para
-#: C/index.docbook:1674
+#: C/index.docbook:1677
msgid ""
"If your library or application includes GObjects, you want their signals, "
"arguments/parameters and position in the hierarchy to be shown in the "
"<filename><pacote>.types</filename>."
#. (itstool) path: example/title
-#: C/index.docbook:1683
+#: C/index.docbook:1686
msgid "Example types file snippet"
msgstr "Trecho de exemplo de arquivo de tipos"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1684
+#: C/index.docbook:1687
#, no-wrap
msgid ""
"\n"
"gtk_arrow_get_type\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1695
+#: C/index.docbook:1698
msgid ""
"Since GTK-Doc 1.8 <application>gtkdoc-scan</application> can generate this "
"list for you. Just add \"--rebuild-types\" to SCAN_OPTIONS in "
"deveria distribuir o arquivo de tipos nem tê-lo sob um controle de versão."
#. (itstool) path: sect1/title
-#: C/index.docbook:1704
+#: C/index.docbook:1707
msgid "Editing the master document"
msgstr "Editando o documento mestre"
#. (itstool) path: sect1/para
-#: C/index.docbook:1706
+#: C/index.docbook:1709
msgid ""
"GTK-Doc produces documentation in DocBook SGML/XML. When processing the "
"inline source comments, the GTK-Doc tools generate one documentation page "
"mestre os inclui e os coloca em uma ordem."
#. (itstool) path: sect1/para
-#: C/index.docbook:1713
+#: C/index.docbook:1716
msgid ""
"While GTK-Doc creates a template master document for you, later runs will "
"not touch it again. This means that one can freely structure the "
"em tempo para ver se há itens a serem introduzidos lá."
#. (itstool) path: tip/para
-#: C/index.docbook:1723
+#: C/index.docbook:1726
msgid ""
"Do not create tutorials as extra documents. Just write extra chapters. The "
"benefit of directly embedding the tutorial for your library into the API "
"atualizações junto com a biblioteca."
#. (itstool) path: sect1/para
-#: C/index.docbook:1732
+#: C/index.docbook:1735
msgid ""
"So what are the things to change inside the master document? For a start is "
"only a little. There are some placeholders (text in square brackets) there "
"colchetes) que você deve cuidar."
#. (itstool) path: example/title
-#: C/index.docbook:1739
+#: C/index.docbook:1742
msgid "Master document header"
msgstr "Cabeçalho do documento mestre"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1740
+#: C/index.docbook:1743
#, no-wrap
msgid ""
"\n"
" <title>[Insira o título aqui]</title>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1756
+#: C/index.docbook:1759
msgid ""
"In addition a few option elements are created in commented form. You can "
"review these and enable them as you like."
"pode revisá-los e habilitá-los como preferir."
#. (itstool) path: example/title
-#: C/index.docbook:1762
+#: C/index.docbook:1765
msgid "Optional part in the master document"
msgstr "Parte opcional do documento mestre"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1763
+#: C/index.docbook:1766
#, no-wrap
msgid ""
"\n"
" -->\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1771
+#: C/index.docbook:1774
msgid ""
"Finally you need to add new section whenever you introduce one. The <link "
"linkend=\"modernizing-gtk-doc-1-16\">gtkdoc-check</link> tool will remind "
"incluídos na documentação."
#. (itstool) path: example/title
-#: C/index.docbook:1779 C/index.docbook:1814
+#: C/index.docbook:1782 C/index.docbook:1817
msgid "Including generated sections"
msgstr "Incluindo seções geradas"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1780
+#: C/index.docbook:1783
#, no-wrap
msgid ""
"\n"
" ...\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:1792
+#: C/index.docbook:1795
msgid "Editing the section file"
msgstr "Editando o arquivo de seção"
#. (itstool) path: sect1/para
-#: C/index.docbook:1794
+#: C/index.docbook:1797
msgid ""
"The section file is used to organise the documentation output by GTK-Doc. "
"Here one specifies which symbol belongs to which module or class and control "
"e controla a visibilidade (pública ou privada)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1800
+#: C/index.docbook:1803
msgid ""
"The section file is a plain text file with tags delimiting sections. Blank "
"lines are ignored and lines starting with a '#' are treated as comment lines."
"tratadas como linhas de comentários."
#. (itstool) path: note/para
-#: C/index.docbook:1807
+#: C/index.docbook:1810
msgid ""
"While the tags make the file look like xml, it is not. Please do not close "
"tags like <SUBSECTION>."
"feche tags como <SUBSECTION>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1815
+#: C/index.docbook:1818
#, no-wrap
msgid ""
"\n"
"</SECTION>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1832
+#: C/index.docbook:1835
msgid ""
"The <FILE> ... </FILE> tag is used to specify the file name, "
"without any suffix. For example, using '<FILE>gnome-config</"
"para minúsculos)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1844
+#: C/index.docbook:1847
msgid ""
"The <TITLE> ... </TITLE> tag is used to specify the title of the "
"section. It is only useful before the templates (if used) are initially "
"obsoleto."
#. (itstool) path: sect1/para
-#: C/index.docbook:1851
+#: C/index.docbook:1854
msgid ""
"You can group items in the section by using the <SUBSECTION> tag. "
"Currently it outputs a blank line between subsections in the synopsis "
"padrão ou pública depende se há entradas públicas (variáveis, vmethods)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1870
+#: C/index.docbook:1873
msgid ""
"You can also use <INCLUDE> ... </INCLUDE> to specify the "
"#include files which are shown in the synopsis sections. It contains a comma-"
"aplicar àquela seção."
#. (itstool) path: chapter/title
-#: C/index.docbook:1884
+#: C/index.docbook:1887
msgid "Controlling the result"
msgstr "Controlando o resultado"
#. (itstool) path: chapter/para
-#: C/index.docbook:1886
+#: C/index.docbook:1889
msgid ""
"A GTK-Doc run generates report files inside the documentation directory. The "
"generated files are named: <filename><package>-undocumented.txt</"
"processados."
#. (itstool) path: chapter/para
-#: C/index.docbook:1895
+#: C/index.docbook:1898
msgid ""
"The <filename><package>-undocumented.txt</filename> file starts with "
"the documentation coverage summary. Below are two sections divided by blank "
"exemplo, um novo parâmetro foi adicionado."
#. (itstool) path: chapter/para
-#: C/index.docbook:1904
+#: C/index.docbook:1907
msgid ""
"The <filename><package>-undeclared.txt</filename> file lists symbols "
"given in the <filename><package>-sections.txt</filename> but not found "
"escritos incorretamente."
#. (itstool) path: chapter/para
-#: C/index.docbook:1911
+#: C/index.docbook:1914
msgid ""
"The <filename><package>-unused.txt</filename> file lists symbol names, "
"where the GTK-Doc scanner has found documentation, but does not know where "
"ainda ao arquivo <filename><pacote>-sections.txt</filename>."
#. (itstool) path: tip/para
-#: C/index.docbook:1919
+#: C/index.docbook:1922
msgid ""
"Enable or add the <option>TESTS=$(GTKDOC_CHECK)</option> line in Makefile."
"am. If at least GTK-Doc 1.9 is installed, this will run sanity checks during "
"verificações de sanidade durante a execução de <command>make check</command>."
#. (itstool) path: chapter/para
-#: C/index.docbook:1926
+#: C/index.docbook:1929
msgid ""
"One can also look at the files produced by the source code scanner: "
"<filename><package>-decl-list.txt</filename> and <filename><"
"este arquivo o contém."
#. (itstool) path: chapter/para
-#: C/index.docbook:1935
+#: C/index.docbook:1938
msgid ""
"If the project is GObject based, one can also look into the files produced "
"by the object scanner: <filename><package>.args.txt</filename>, "
"executando <command>GTK_DOC_KEEP_INTERMEDIATE=1 make</command>."
#. (itstool) path: chapter/title
-#: C/index.docbook:1950
+#: C/index.docbook:1953
msgid "Modernizing the documentation"
msgstr "Modernizando a documentação"
#. (itstool) path: chapter/para
-#: C/index.docbook:1952
+#: C/index.docbook:1955
msgid ""
"GTK-Doc has been around for quite some time. In this section we list new "
"features together with the version since when it is available."
"funcionalidades juntamente da versão desde a qual está disponível."
#. (itstool) path: sect1/title
-#: C/index.docbook:1958
+#: C/index.docbook:1961
msgid "GTK-Doc 1.9"
msgstr "GTK-Doc 1.9"
#. (itstool) path: sect1/para
-#: C/index.docbook:1960
+#: C/index.docbook:1963
msgid ""
"When using xml instead of sgml, one can actually name the master document "
"<filename><package>-docs.xml</filename>."
"<filename><pacote>-docs.xml</filename>."
#. (itstool) path: sect1/para
-#: C/index.docbook:1965
+#: C/index.docbook:1968
msgid ""
"This version supports <option>SCAN_OPTIONS=--rebuild-sections</option> in "
"<filename>Makefile.am</filename>. When this is enabled, the <filename><"
"<code>meld <package>-decl-list.txt <package>-sections.txt</code>."
#. (itstool) path: sect1/para
-#: C/index.docbook:1976
-#| msgid ""
-#| "Version 1.8 already introduced the syntax for documenting sections in the "
-#| "sources instead of the separate files under <filename class=\"directory"
-#| "\">tmpl</filename>. This version adds options to switch the whole doc "
-#| "module to not use the extra tmpl build step at all, by using <option>--"
-#| "flavour no-tmpl</option> in <filename>configure.ac</filename>. If you "
-#| "don't have a <filename class=\"directory\">tmpl</filename> checked into "
-#| "you source control system and haven't yet switched, just add the flag to "
-#| "<filename>configure.ac</filename> and you are done."
+#: C/index.docbook:1979
msgid ""
"Version 1.8 already introduced the syntax for documenting sections in the "
"sources instead of the separate files under <filename class=\"directory"
"<filename>configure.ac</filename> and you are done."
msgstr ""
"A versão 1.8 já introduziu a sintaxe para documentação seções nos fontes em "
-"vez dos arquivos separados sob <filename class=\"directory\">tmpl</filename>"
-". Essa versão adiciona opções para alternar todo o módulo de documentação "
-"para não usar a etapa de compilação extra do tmpl, usando <option>--flavour "
-"no-tmpl</option> no <filename>configure.ac</filename>. Se você não possui um "
-"<filename class=\"directory\">tmpl</filename> no seu sistema de controle de "
-"versão e ainda não trocou, basta adicionar uma opção ao "
-"<filename>configure.ac</filename> e está resolvido."
+"vez dos arquivos separados sob <filename class=\"directory\">tmpl</"
+"filename>. Essa versão adiciona opções para alternar todo o módulo de "
+"documentação para não usar a etapa de compilação extra do tmpl, usando "
+"<option>--flavour no-tmpl</option> no <filename>configure.ac</filename>. Se "
+"você não possui um <filename class=\"directory\">tmpl</filename> no seu "
+"sistema de controle de versão e ainda não trocou, basta adicionar uma opção "
+"ao <filename>configure.ac</filename> e está resolvido."
#. (itstool) path: sect1/title
-#: C/index.docbook:1988
+#: C/index.docbook:1991
msgid "GTK-Doc 1.10"
msgstr "GTK-Doc 1.10"
#. (itstool) path: sect1/para
-#: C/index.docbook:1990
+#: C/index.docbook:1993
msgid ""
"This version supports <option>SCAN_OPTIONS=--rebuild-types</option> in "
"<filename>Makefile.am</filename>. When this is enabled, the <filename><"
"código que é compilado condicionalmente."
#. (itstool) path: sect1/title
-#: C/index.docbook:2001
+#: C/index.docbook:2004
msgid "GTK-Doc 1.16"
msgstr "GTK-Doc 1.16"
#. (itstool) path: example/title
-#: C/index.docbook:2007
+#: C/index.docbook:2010
msgid "Enable gtkdoc-check"
msgstr "Habilitar gtkdoc-check"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2008
+#: C/index.docbook:2011
#, no-wrap
msgid ""
"\n"
"endif\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:2003
+#: C/index.docbook:2006
msgid ""
"This version includes a new tool called gtkdoc-check. This tool can run a "
"set of sanity checks on your documentation. It is enabled by adding these "
"filename>. <_:example-1/>"
#. (itstool) path: sect1/title
-#: C/index.docbook:2021
+#: C/index.docbook:2024
msgid "GTK-Doc 1.20"
msgstr "GTK-Doc 1.20"
#. (itstool) path: sect1/para
-#: C/index.docbook:2023
+#: C/index.docbook:2026
msgid ""
"Version 1.18 brought some initial markdown support. Using markdown in doc "
"comments is less intrusive than writing docbook xml. This version improves a "
"comentário</link> tem todos os detalhes."
#. (itstool) path: sect1/title
-#: C/index.docbook:2033
+#: C/index.docbook:2036
msgid "GTK-Doc 1.25"
msgstr "GTK-Doc 1.25"
#. (itstool) path: example/title
-#: C/index.docbook:2043
+#: C/index.docbook:2046
msgid "Use pre-generated entities"
msgstr "Usando entradas geradas previamente"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2044
+#: C/index.docbook:2047
#, no-wrap
msgid ""
"\n"
" </bookinfo>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:2035
-#| msgid ""
-#| "The makefiles shipped with this version generate an entity file at "
-#| "<filename>xml/gtkdocentities.ent</filename>, containing entities for e.g. "
-#| "package_name and package_version. You can use this e.g. in the main xml "
-#| "file to avoid hardcoding the version number. Below is any example that "
-#| "shows how the entity file is included and how the entities are used. The "
-#| "entities can also be used in all generated files, GTK-Doc will use the "
-#| "same xml header in generated xml files. <_:example-1/>"
+#: C/index.docbook:2038
msgid ""
"The makefiles shipped with this version generate an entity file at "
"<filename>xml/gtkdocentities.ent</filename>, containing entities for e.g. "
"xml nos arquivos xml gerados. <_:example-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:2069
+#: C/index.docbook:2072
msgid "Documenting other interfaces"
msgstr "Documentando outras interfaces"
#. (itstool) path: chapter/para
-#: C/index.docbook:2071
+#: C/index.docbook:2074
msgid ""
"So far we have been using GTK-Doc to document the API of code. The next "
"sections contain suggestions how the tools can be used to document other "
"para documentar outras interfaces, também."
#. (itstool) path: sect1/title
-#: C/index.docbook:2078
+#: C/index.docbook:2081
msgid "Command line options and man pages"
msgstr "Opções de linha de comando e de páginas man"
# RefEntry é uma página de referência do DocBook (http://www.docbook.org/tdg/en/html/refentry.html)
#. (itstool) path: sect1/para
-#: C/index.docbook:2080
+#: C/index.docbook:2083
msgid ""
"As one can generate man pages for a docbook refentry as well, it sounds like "
"a good idea to use it for that purpose. This way the interface is part of "
"parte da referência e é possível obter a página man de graça."
#. (itstool) path: sect2/title
-#: C/index.docbook:2087
+#: C/index.docbook:2090
msgid "Document the tool"
msgstr "Documentar a ferramenta"
#. (itstool) path: sect2/para
-#: C/index.docbook:2089
+#: C/index.docbook:2092
msgid ""
"Create one refentry file per tool. Following <link linkend="
"\"settingup_docfiles\">our example</link> we would call it <filename>meep/"
"assim como exemplos, por exemplo, em glib."
#. (itstool) path: sect2/title
-#: C/index.docbook:2099
+#: C/index.docbook:2102
msgid "Adding the extra configure check"
msgstr "Adicionando a verificação extra ao configure"
#. (itstool) path: example/title
-#: C/index.docbook:2102 C/index.docbook:2120
+#: C/index.docbook:2105 C/index.docbook:2123
msgid "Extra configure checks"
msgstr "Verificações extra no configure"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2103
+#: C/index.docbook:2106
#, no-wrap
msgid ""
"\n"
"AM_CONDITIONAL(ENABLE_MAN, test x$enable_man != xno)\n"
#. (itstool) path: sect2/title
-#: C/index.docbook:2117
+#: C/index.docbook:2120
msgid "Adding the extra makefile rules"
msgstr "Adicionando as regras extras ao makefile"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2121
+#: C/index.docbook:2124
#, no-wrap
msgid ""
"\n"
"EXTRA_DIST += meep.xml\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:2143
+#: C/index.docbook:2146
msgid "DBus interfaces"
msgstr "Interfaces DBus"
#. (itstool) path: sect1/para
-#: C/index.docbook:2145
+#: C/index.docbook:2148
msgid ""
"(FIXME: http://hal.freedesktop.org/docs/DeviceKit/DeviceKit.html, http://"
"cgit.freedesktop.org/DeviceKit/DeviceKit/tree/doc/dbus)"
"http://cgit.freedesktop.org/DeviceKit/DeviceKit/tree/doc/dbus)"
#. (itstool) path: chapter/title
-#: C/index.docbook:2154
+#: C/index.docbook:2157
msgid "Frequently asked questions"
msgstr "Perguntas frequentes"
#. (itstool) path: segmentedlist/segtitle
-#: C/index.docbook:2158
+#: C/index.docbook:2161
msgid "Question"
msgstr "Questão"
#. (itstool) path: segmentedlist/segtitle
-#: C/index.docbook:2159
+#: C/index.docbook:2162
msgid "Answer"
msgstr "Resposta"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2161
+#: C/index.docbook:2164
msgid "No class hierarchy."
msgstr "Sem hierarquia de classe."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2162
+#: C/index.docbook:2165
msgid ""
"The objects <function>xxx_get_type()</function> function has not been "
"entered into the <filename><package>.types</filename> file."
"arquivo <filename><pacote>.types</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2168
+#: C/index.docbook:2171
msgid "Still no class hierarchy."
msgstr "Ainda sem hierarquia."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2169
+#: C/index.docbook:2172
msgid ""
"Missing or wrong naming in <filename><package>-sections.txt</filename> "
"file (see <ulink url=\"http://mail.gnome.org/archives/gtk-doc-list/2003-"
"gtk-doc-list/2003-October/msg00006.html\">explicação</ulink>)."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2175
+#: C/index.docbook:2178
msgid "Damn, I have still no class hierarchy."
msgstr "Droga. Eu ainda não tenho hierarquia de classes."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2176
+#: C/index.docbook:2179
msgid ""
"Is the object name (name of the instance struct, e.g. <type>GtkWidget</"
"type>) part of the normal section (don't put this into Standard or Private "
"subseções Standard ou Private)?"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2183
+#: C/index.docbook:2186
msgid "No symbol index."
msgstr "Nenhum símbolo de índice."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2184
+#: C/index.docbook:2187
msgid ""
"Does the <filename><package>-docs.{xml,sgml}</filename> contain a "
"index that xi:includes the generated index?"
"“xi:inclui” o índice gerado?"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2190
+#: C/index.docbook:2193
msgid "Symbols are not linked to their doc-section."
msgstr "Símbolos não estão vinculados ao seus doc-section."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2191
+#: C/index.docbook:2194
msgid ""
"Is the doc-comment using the correct markup (added #,% or ())? Check if the "
"gtkdoc-fixxref warns about unresolvable xrefs."
"Verifique se o gtkdoc-fixxref avisa sobre xrefs não resolvidos."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2197
+#: C/index.docbook:2200
msgid "A new class does not appear in the docs."
msgstr "Uma nova classe não aparece nos documentos."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2198
+#: C/index.docbook:2201
msgid ""
"Is the new page xi:included from <filename><package>-docs.{xml,sgml}</"
"filename>."
"filename>?"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2204
+#: C/index.docbook:2207
msgid "A new symbol does not appear in the docs."
msgstr "Um novo símbolo não aparece nos documentos."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2205
+#: C/index.docbook:2208
msgid ""
"Is the doc-comment properly formatted. Check for spelling mistakes in the "
"begin of the comment. Check if the gtkdoc-fixxref warns about unresolvable "
"<filename><pacote>-sections.txt</filename> em uma subseção pública."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2213
+#: C/index.docbook:2216
msgid "A type is missing from the class hierarchy."
msgstr "Um tipo está faltando da hierarquia de classe."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2214
+#: C/index.docbook:2217
msgid ""
"If the type is listed in <filename><package>.hierarchy</filename> but "
"not in <filename>xml/tree_index.sgml</filename> then double check that the "
"listada ou incidentalmente marcada como privada, ela não será mostrada."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2223
+#: C/index.docbook:2226
msgid "I get foldoc links for all gobject annotations."
msgstr ""
"Obtenho links de seguimento de documentos para todas as anotações gobject."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2224
+#: C/index.docbook:2227
msgid ""
"Check that <filename>xml/annotation-glossary.xml</filename> is xi:included "
"from <filename><package>-docs.{xml,sgml}</filename>."
"incluído” de <filename><pacote>-docs.{xml,sgml}</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2232
+#: C/index.docbook:2235
msgid "Parameter described in source code comment block but does not exist"
msgstr "Parâmetro descrito no bloco de comentário do código fonte não existe"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2233
+#: C/index.docbook:2236
msgid ""
"Check if the prototype in the header has different parameter names as in the "
"source."
"fonte."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2238
+#: C/index.docbook:2241
msgid "multiple \"IDs\" for constraint linkend: XYZ"
msgstr "múltiplos “IDs” para restrições do fim do link XYZ"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2239
+#: C/index.docbook:2242
msgid ""
"Symbol XYZ appears twice in <filename><package>-sections.txt</"
"filename> file."
"sections.txt</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2242
+#: C/index.docbook:2245
msgid ""
"Element typename in namespace '' encountered in para, but no template "
"matches."
"correspondeu."
#. (itstool) path: chapter/title
-#: C/index.docbook:2249
+#: C/index.docbook:2252
msgid "Tools related to gtk-doc"
msgstr "Ferramentas relacionadas ao gtk-doc"
#. (itstool) path: chapter/para
-#: C/index.docbook:2251
+#: C/index.docbook:2254
msgid ""
"GtkDocPlugin - a <ulink url=\"http://trac-hacks.org/wiki/GtkDocPlugin\">Trac "
"GTK-Doc</ulink> integration plugin, that adds API docs to a trac site and "
"a um site trac e integra com a pesquisa do trac."
#. (itstool) path: chapter/para
-#: C/index.docbook:2256
+#: C/index.docbook:2259
msgid ""
"Gtkdoc-depscan - a tool (part of gtk-doc) to check used API against since "
"tags in the API to determine the minimum required version."
"software livre que você escolher, como, por exemplo, a <_:ulink-1/>, para "
"permitir seu uso em software livre."
+#~ msgid "<guilabel>Python</guilabel> - optional - for gtkdoc-depscan"
+#~ msgstr "<guilabel>Python</guilabel> - opcional - para gtkdoc-depscan"
+
#~ msgid ""
#~ "<guilabel>Generating the \"template\" files.</guilabel> "
#~ "<application>gtkdoc-mktmpl</application> creates a number of files in the "
<revhistory>
<revision>
- <revnumber>1.25.1</revnumber>
- <date>21 March 2016</date>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
<authorinitials>ss</authorinitials>
- <revremark>development version</revremark>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision>
+ <revnumber>1.26</revnumber>
+ <date>11 Aug 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>port all tools from perl/bash to python</revremark>
</revision>
<revision>
<revnumber>1.25</revnumber>
</para>
<para>
- GTK-Doc consists of a number of perl scripts, each performing a different step
+ GTK-Doc consists of a number of python scripts, each performing a different step
in the process.
</para>
<sect2 id="requirements">
<title>Requirements</title>
<para>
- <guilabel>Perl v5</guilabel> - the main scripts are in Perl.
+ <guilabel>python 2/3</guilabel> - the main scripts are written in python.
</para>
<para>
<guilabel>xsltproc</guilabel> - the xslt processor from libxslt
<ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>
</para>
<para>
- <guilabel>Python</guilabel> - optional - for gtkdoc-depscan
- </para>
- <para>
One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> or
<guilabel>vim</guilabel> - optional - used for syntax highlighting of examples
</para>
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
]]></programlisting>
</example>
</legalnotice>
<revhistory>
- <revision><revnumber>1.25.1</revnumber> <date>21 Mars 2016</date> <authorinitials>ss</authorinitials> <revremark>utvecklingsversion</revremark></revision>
+ <revision>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision><revnumber>1.26</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</authorinitials> <revremark>portera alla verktyg från perl/bash till python</revremark></revision>
<revision><revnumber>1.25</revnumber> <date>21 Mars 2016</date> <authorinitials>ss</authorinitials> <revremark>programfixar, uppstädning av tester</revremark></revision>
<revision><revnumber>1.24</revnumber> <date>29 Maj 2015</date> <authorinitials>ss</authorinitials> <revremark>programfix</revremark></revision>
<revision><revnumber>1.23</revnumber> <date>17 Maj 2015</date> <authorinitials>ss</authorinitials> <revremark>programfix</revremark></revision>
<para>GTK-Doc fungerar så att det använder dokumentation för funktioner placerad inuti källkodsfilerna i speciellt formaterade kommentarsblock, eller dokumentation som lagts till i mallfilerna som GTK-Doc använder (notera dock att GTK-Doc endast kommer att dokumentera funktioner som deklarerats i huvudfiler; det kommer inte att producera utdata för statiska funktioner).</para>
- <para>GTK-Doc består av ett antal perl-skript som vart och ett utför olika steg i processen.</para>
+ <para>GTK-Doc består av ett antal python-skript som vart och ett utför olika steg i processen.</para>
<para>Det finns 5 huvudsteg i processen:</para>
<sect2 id="requirements">
<title>Krav</title>
- <para><guilabel>Perl v5</guilabel> - huvudskripten är skrivna i Perl.</para>
+ <para><guilabel>python 2/3</guilabel> - huvudskripten är skrivna i python.</para>
<para><guilabel>xsltproc</guilabel> - xslt-processorn från libxslt <ulink url="http://xmlsoft.org/XSLT/" type="http">xmlsoft.org/XSLT/</ulink></para>
<para><guilabel>docbook-xsl</guilabel> - docbook xsl-stilmallar <ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink></para>
- <para><guilabel>Python</guilabel> - valfritt - för gtkdoc-depscan</para>
<para>Endera av <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> eller <guilabel>vim</guilabel> - valfritt - används för syntaxfärgning av exempel</para>
</sect2>
</sect1>
* @foo: någon foo
* @bar: någon bar
*
- * Signalen ::foobarized sänds ut varje gång någon försöker att foobarisera @widget.
+ * Signalen ::foobariserad sänds ut varje gång någon försöker att foobarisera @widget.
*/
foo_signals[FOOBARIZE] =
- g_signal_new ("foobarisera",
+ g_signal_new ("foobariserad",
...
</programlisting>
</example>
msgid ""
msgstr ""
"Project-Id-Version: gtk-doc master\n"
-"POT-Creation-Date: 2017-04-23 16:21+0000\n"
-"PO-Revision-Date: 2017-04-28 23:38+0200\n"
+"POT-Creation-Date: 2017-11-01 20:34+0000\n"
+"PO-Revision-Date: 2017-11-03 22:15+0100\n"
"Last-Translator: Anders Jonsson <anders.jonsson@norsjovallen.se>\n"
"Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
"Language: sv\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 1.8.11\n"
+"X-Generator: Poedit 2.0.4\n"
#. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
msgctxt "_"
#. (itstool) path: revhistory/revision
#: C/index.docbook:83
msgid ""
-"<revnumber>1.2
5.1</revnumber> <date>21 March 2016</date> <authorinitials>ss</"
-"authorinitials> <revremark>development version</revremark>"
+"<revnumber>1.2
6.1</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>development</revremark>"
msgstr ""
-"<revnumber>1.2
5.1</revnumber> <date>21 Mars 2016</date> <authorinitials>ss</"
-"authorinitials> <revremark>utvecklingsversion</revremark>"
+"<revnumber>1.2
6.1</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>utveckling</revremark>"
#. (itstool) path: revhistory/revision
#: C/index.docbook:89
msgid ""
+"<revnumber>1.26</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>port all tools from perl/bash to python</"
+"revremark>"
+msgstr ""
+"<revnumber>1.26</revnumber> <date>11 Aug 2017</date> <authorinitials>ss</"
+"authorinitials> <revremark>portera alla verktyg från perl/bash till python</"
+"revremark>"
+
+#. (itstool) path: revhistory/revision
+#: C/index.docbook:95
+msgid ""
"<revnumber>1.25</revnumber> <date>21 March 2016</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, test cleanups</revremark>"
msgstr ""
"authorinitials> <revremark>programfixar, uppstädning av tester</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:95
+#: C/index.docbook:101
msgid ""
"<revnumber>1.24</revnumber> <date>29 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fix</revremark>"
"authorinitials> <revremark>programfix</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:101
+#: C/index.docbook:107
msgid ""
"<revnumber>1.23</revnumber> <date>17 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fix</revremark>"
"authorinitials> <revremark>programfix</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:107
+#: C/index.docbook:113
msgid ""
"<revnumber>1.22</revnumber> <date>07 May 2015</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, dropping deprecated features</"
"funktioner</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:113
+#: C/index.docbook:119
msgid ""
"<revnumber>1.21</revnumber> <date>17 Jul 2014</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, dropping deprecated features</"
"funktioner</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:119
+#: C/index.docbook:125
msgid ""
"<revnumber>1.20</revnumber> <date>16 Feb 2014</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, markdown support, style improvements</"
"stilförbättringar</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:125
+#: C/index.docbook:131
msgid ""
"<revnumber>1.19</revnumber> <date>05 Jun 2013</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes</revremark>"
"authorinitials> <revremark>programfixar</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:131
+#: C/index.docbook:137
msgid ""
"<revnumber>1.18</revnumber> <date>14 Sep 2011</date> <authorinitials>ss</"
"authorinitials> <revremark>bug fixes, speedups, markdown support</revremark>"
"revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:137
+#: C/index.docbook:143
msgid ""
"<revnumber>1.17</revnumber> <date>26 Feb 2011</date> <authorinitials>sk</"
"authorinitials> <revremark>urgent bug fix update</revremark>"
"authorinitials> <revremark>brådskande programfixuppdatering</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:143
+#: C/index.docbook:149
msgid ""
"<revnumber>1.16</revnumber> <date>14 Jan 2011</date> <authorinitials>sk</"
"authorinitials> <revremark>bugfixes, layout improvements</revremark>"
"authorinitials> <revremark>programfixar, layoutförbättringar</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:149
+#: C/index.docbook:155
msgid ""
"<revnumber>1.15</revnumber> <date>21 May 2010</date> <authorinitials>sk</"
"authorinitials> <revremark>bug and regression fixes</revremark>"
"authorinitials> <revremark>program- och regressionsfixar</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:155
+#: C/index.docbook:161
msgid ""
"<revnumber>1.14</revnumber> <date>28 March 2010</date> <authorinitials>sk</"
"authorinitials> <revremark>bugfixes and performance improvements</revremark>"
"revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:161
+#: C/index.docbook:167
msgid ""
"<revnumber>1.13</revnumber> <date>18 December 2009</date> "
"<authorinitials>sk</authorinitials> <revremark>broken tarball update</"
"trasigt tar-arkiv</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:167
+#: C/index.docbook:173
msgid ""
"<revnumber>1.12</revnumber> <date>18 December 2009</date> "
"<authorinitials>sk</authorinitials> <revremark>new tool features and "
"programfixar</revremark>"
#. (itstool) path: revhistory/revision
-#: C/index.docbook:173
+#: C/index.docbook:179
msgid ""
"<revnumber>1.11</revnumber> <date>16 November 2008</date> "
"<authorinitials>mal</authorinitials> <revremark>GNOME doc-utils migration</"
"revremark>"
#. (itstool) path: chapter/title
-#: C/index.docbook:186
+#: C/index.docbook:192
msgid "Introduction"
msgstr "Introduktion"
#. (itstool) path: chapter/para
-#: C/index.docbook:188
+#: C/index.docbook:194
msgid ""
"This chapter introduces GTK-Doc and gives an overview of what it is and how "
"it is used."
"hur det används."
#. (itstool) path: sect1/title
-#: C/index.docbook:194
+#: C/index.docbook:200
msgid "What is GTK-Doc?"
msgstr "Vad är GTK-Doc?"
#. (itstool) path: sect1/para
-#: C/index.docbook:196
+#: C/index.docbook:202
msgid ""
"GTK-Doc is used to document C code. It is typically used to document the "
"public API of libraries, such as the GTK+ and GNOME libraries. But it can "
"biblioteken. Men det kan också användas för att dokumentera programkod."
#. (itstool) path: sect1/title
-#: C/index.docbook:204
+#: C/index.docbook:210
msgid "How Does GTK-Doc Work?"
msgstr "Hur fungerar GTK-Doc?"
# sebras: how do I translate header files?
#. (itstool) path: sect1/para
-#: C/index.docbook:206
+#: C/index.docbook:212
msgid ""
"GTK-Doc works by using documentation of functions placed inside the source "
"files in specially-formatted comment blocks, or documentation added to the "
"huvudfiler; det kommer inte att producera utdata för statiska funktioner)."
#. (itstool) path: sect1/para
-#: C/index.docbook:213
+#: C/index.docbook:219
msgid ""
-"GTK-Doc consists of a number of perl scripts, each performing a different "
+"GTK-Doc consists of a number of python scripts, each performing a different "
"step in the process."
msgstr ""
-"GTK-Doc består av ett antal perl-skript som vart och ett utför olika steg i "
-"processen."
+"GTK-Doc består av ett antal python-skript som vart och ett utför olika steg "
+"i processen."
#. (itstool) path: sect1/para
-#: C/index.docbook:218
+#: C/index.docbook:224
msgid "There are 5 main steps in the process:"
msgstr "Det finns 5 huvudsteg i processen:"
#. (itstool) path: listitem/para
-#: C/index.docbook:225
+#: C/index.docbook:231
msgid ""
"<guilabel>Writing the documentation.</guilabel> The author fills in the "
"source files with the documentation for each function, macro, union etc. (In "
# sebras: more header files...
#. (itstool) path: listitem/para
-#: C/index.docbook:235
+#: C/index.docbook:241
msgid ""
"<guilabel>Gathering information about the code.</guilabel> "
"<application>gtkdoc-scan</application> scans the header files of the code "
"module>-overrides.txt</filename>."
#. (itstool) path: listitem/para
-#: C/index.docbook:252
+#: C/index.docbook:258
msgid ""
"<application>gtkdoc-scangobj</application> can also be used to dynamically "
"query a library about any GObject subclasses it exports. It saves "
"vilka GObject-egenskaper och signaler det tillhandahåller."
#. (itstool) path: listitem/para
-#: C/index.docbook:258
+#: C/index.docbook:264
msgid ""
"<application>gtkdoc-scanobj</application> should not be used anymore. It was "
"needed in the past when GObject was still GtkObject inside gtk+."
"behövdes tidigare när GObject fortfarande var GtkObject inuti gtk+."
#. (itstool) path: listitem/para
-#: C/index.docbook:265
+#: C/index.docbook:271
msgid ""
"<guilabel>Generating the XML and HTML/PDF.</guilabel> <application>gtkdoc-"
"mkdb</application> turns the template files into XML files in the <filename "
"introspektionsdata."
#. (itstool) path: listitem/para
-#: C/index.docbook:274
+#: C/index.docbook:280
msgid ""
"<application>gtkdoc-mkhtml</application> turns the XML files into HTML files "
"in the <filename class=\"directory\">html/</filename> subdirectory. Likewise "
"till ett PDF-dokument kallat <filename><package>.pdf</filename>."
#. (itstool) path: listitem/para
-#: C/index.docbook:280
+#: C/index.docbook:286
msgid ""
"Files in <filename class=\"directory\">xml/</filename> and <filename class="
"\"directory\">html/</filename> directories are always overwritten. One "
"aldrig redigera dem direkt."
#. (itstool) path: listitem/para
-#: C/index.docbook:288
+#: C/index.docbook:294
msgid ""
"<guilabel>Fixing up cross-references between documents.</guilabel> After "
"installing the HTML files, <application>gtkdoc-fixxref</application> can be "
"(i de fall där dokumentationen finns installerad)."
#. (itstool) path: sect1/title
-#: C/index.docbook:306
+#: C/index.docbook:312
msgid "Getting GTK-Doc"
msgstr "Hämta GTK-Doc"
#. (itstool) path: sect2/title
-#: C/index.docbook:309
+#: C/index.docbook:315
msgid "Requirements"
msgstr "Krav"
#. (itstool) path: sect2/para
-#: C/index.docbook:310
-msgid "<guilabel>Perl v5</guilabel> - the main scripts are in Perl."
-msgstr "<guilabel>Perl v5</guilabel> - huvudskripten är skrivna i Perl."
+#: C/index.docbook:316
+msgid ""
+"<guilabel>python 2/3</guilabel> - the main scripts are written in python."
+msgstr "<guilabel>python 2/3</guilabel> - huvudskripten är skrivna i python."
#. (itstool) path: sect2/para
-#: C/index.docbook:313
+#: C/index.docbook:319
msgid ""
"<guilabel>xsltproc</guilabel> - the xslt processor from libxslt <ulink url="
"\"http://xmlsoft.org/XSLT/\" type=\"http\">xmlsoft.org/XSLT/</ulink>"
"\"http://xmlsoft.org/XSLT/\" type=\"http\">xmlsoft.org/XSLT/</ulink>"
#. (itstool) path: sect2/para
-#: C/index.docbook:317
+#: C/index.docbook:323
msgid ""
"<guilabel>docbook-xsl</guilabel> - the docbook xsl stylesheets <ulink url="
"\"http://sourceforge.net/projects/docbook/files/docbook-xsl/\" type=\"http"
"\"http://sourceforge.net/projects/docbook/files/docbook-xsl/\" type=\"http"
"\">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>"
-#. (itstool) path: sect2/para
-#: C/index.docbook:321
-msgid "<guilabel>Python</guilabel> - optional - for gtkdoc-depscan"
-msgstr "<guilabel>Python</guilabel> - valfritt - för gtkdoc-depscan"
-
# sebras: remind me how was highlighting translated..?
#. (itstool) path: sect2/para
-#: C/index.docbook:324
+#: C/index.docbook:327
msgid ""
"One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> "
"or <guilabel>vim</guilabel> - optional - used for syntax highlighting of "
"syntaxfärgning av exempel"
#. (itstool) path: sect1/title
-#: C/index.docbook:332
+#: C/index.docbook:335
msgid "About GTK-Doc"
msgstr "Om GTK-Doc"
#. (itstool) path: sect1/para
-#: C/index.docbook:334 C/index.docbook:348
+#: C/index.docbook:337 C/index.docbook:351
msgid "(FIXME)"
msgstr "(FIXME)"
#. (itstool) path: sect1/para
-#: C/index.docbook:338
+#: C/index.docbook:341
msgid ""
"(History, authors, web pages, mailing list, license, future plans, "
"comparison with other similar systems.)"
"jämförelse med andra liknande system.)"
#. (itstool) path: sect1/title
-#: C/index.docbook:346
+#: C/index.docbook:349
msgid "About this Manual"
msgstr "Om denna handbok"
#. (itstool) path: sect1/para
-#: C/index.docbook:352
+#: C/index.docbook:355
msgid "(who it is meant for, where you can get it, license)"
msgstr "(vem är den avsett för, var kan du få tag i den, licens)"
#. (itstool) path: chapter/title
-#: C/index.docbook:361
+#: C/index.docbook:364
msgid "Setting up your project"
msgstr "Att ställa in ditt projekt"
#. (itstool) path: chapter/para
-#: C/index.docbook:363
+#: C/index.docbook:366
msgid ""
"The next sections describe what steps to perform to integrate GTK-Doc into "
"your project. Theses sections assume we work on a project called 'meep'. "
"byggsystem."
#. (itstool) path: sect1/title
-#: C/index.docbook:374
+#: C/index.docbook:377
msgid "Setting up a skeleton documentation"
msgstr "Att ställa in en skelettstruktur för dokumentation"
#. (itstool) path: sect1/para
-#: C/index.docbook:376
+#: C/index.docbook:379
msgid ""
"Under your top-level project directory create folders called docs/reference "
"(this way you can also have docs/help for end-user documentation). It is "
"bibliotek är detta steg inte nödvändigt."
#. (itstool) path: example/title
-#: C/index.docbook:385
+#: C/index.docbook:388
msgid "Example directory structure"
msgstr "Exempel på katalogstruktur"
#. (itstool) path: example/programlisting
-#: C/index.docbook:386
+#: C/index.docbook:389
#, no-wrap
msgid ""
"\n"
" meeper/\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:383
+#: C/index.docbook:386
msgid "This can then look as shown below: <_:example-1/>"
msgstr "Detta kan se ut enligt nedan: <_:example-1/>"
#. (itstool) path: sect1/title
#. (itstool) path: example/title
-#: C/index.docbook:401 C/index.docbook:408
+#: C/index.docbook:404 C/index.docbook:411
msgid "Integration with autoconf"
msgstr "Integrering med autoconf"
#. (itstool) path: sect1/para
-#: C/index.docbook:403
+#: C/index.docbook:406
msgid ""
"Very easy! Just add one line to your <filename>configure.ac</filename> "
"script."
"filename>-skript."
#. (itstool) path: example/programlisting
-#: C/index.docbook:409
+#: C/index.docbook:412
#, no-wrap
msgid ""
"\n"
"GTK_DOC_CHECK([1.14],[--flavour no-tmpl])\n"
#. (itstool) path: example/title
-#: C/index.docbook:421
+#: C/index.docbook:424
msgid "Keep gtk-doc optional"
msgstr "Låt gtk-doc vara valfritt"
#. (itstool) path: example/programlisting
-#: C/index.docbook:422
+#: C/index.docbook:425
#, no-wrap
msgid ""
"\n"
"])\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:416
+#: C/index.docbook:419
msgid ""
"This will require all developers to have gtk-doc installed. If it is okay "
"for your project to have optional api-doc build setup, you can solve this as "
# sebras: <function> or <symbol>?
#. (itstool) path: sect1/para
-#: C/index.docbook:433
+#: C/index.docbook:436
msgid ""
"The first argument is used to check for the gtkdocversion at configure time. "
"The 2nd, optional argument is used by <application>gtkdocize</application>. "
"lägger också till flera configure-flaggor:"
#. (itstool) path: listitem/para
-#: C/index.docbook:439
+#: C/index.docbook:442
msgid "--with-html-dir=PATH : path to installed docs"
msgstr "--with-html-dir=SÖKVÄG : sökväg till installerad dokumentation"
#. (itstool) path: listitem/para
-#: C/index.docbook:440
+#: C/index.docbook:443
msgid "--enable-gtk-doc : use gtk-doc to build documentation [default=no]"
msgstr ""
"--enable-gtk-doc : använd gtk-doc för att bygga dokumentation "
"[standardvärde=no]"
#. (itstool) path: listitem/para
-#: C/index.docbook:441
+#: C/index.docbook:444
msgid ""
"--enable-gtk-doc-html : build documentation in html format [default=yes]"
msgstr ""
"--enable-gtk-doc-html : bygg dokumentation i html-format [standardvärde=yes]"
#. (itstool) path: listitem/para
-#: C/index.docbook:442
+#: C/index.docbook:445
msgid "--enable-gtk-doc-pdf : build documentation in pdf format [default=no]"
msgstr ""
"--enable-gtk-doc-pdf : bygg dokumentation i pdf-format [standardvärde=no]"
#. (itstool) path: important/para
-#: C/index.docbook:446
+#: C/index.docbook:449
msgid ""
"GTK-Doc is disabled by default! Remember to pass the option <option>'--"
"enable-gtk-doc'</option> to the next <filename>configure</filename> run. "
"är rimligt för användare men inte för utvecklare)."
#. (itstool) path: sect1/para
-#: C/index.docbook:454
+#: C/index.docbook:457
msgid ""
"Furthermore it is recommended that you have the following line inside your "
"<filename>configure.ac</filename> script. This allows "
"till ditt projekt."
#. (itstool) path: example/title
-#: C/index.docbook:462
+#: C/index.docbook:465
msgid "Preparation for gtkdocize"
msgstr "Förberedelse för gtkdocize"
#. (itstool) path: example/programlisting
-#: C/index.docbook:463
+#: C/index.docbook:466
#, no-wrap
msgid ""
"\n"
"AC_CONFIG_MACRO_DIR(m4)\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:468
+#: C/index.docbook:471
msgid ""
"After all changes to <filename>configure.ac</filename> are made, update the "
"<filename>configure</filename> file. This can be done by re-running "
"köra om <code>autoreconf -i</code> eller <code>autogen.sh</code>."
#. (itstool) path: sect1/title
-#: C/index.docbook:476
+#: C/index.docbook:479
msgid "Integration with automake"
msgstr "Integrering med automake"
#. (itstool) path: sect1/para
-#: C/index.docbook:478
+#: C/index.docbook:481
msgid ""
"First copy the <filename>Makefile.am</filename> from the <filename class="
"\"directory\">examples</filename> sub directory of the <ulink url=\"https://"
"och ett."
#. (itstool) path: sect1/para
-#: C/index.docbook:489
+#: C/index.docbook:492
msgid ""
"The next step is to edit the settings inside the <filename>Makefile.am</"
"filename>. All the settings have a comment above that describes their "
"att lista de parametrar som stöds."
#. (itstool) path: sect1/title
-#: C/index.docbook:503
+#: C/index.docbook:506
msgid "Integration with autogen"
msgstr "Integrering med autogen"
#. (itstool) path: sect1/para
-#: C/index.docbook:505
+#: C/index.docbook:508
msgid ""
"Most projects will have an <filename>autogen.sh</filename> script to setup "
"the build infrastructure after a checkout from version control system (such "
"ett sådant skript. Det bör köras före autoheader, automake eller autoconf."
#. (itstool) path: example/title
-#: C/index.docbook:514
+#: C/index.docbook:517
msgid "Running gtkdocize from autogen.sh"
msgstr "Köra gtkdocize från autogen.sh"
#. (itstool) path: example/programlisting
-#: C/index.docbook:515
+#: C/index.docbook:518
#, no-wrap
msgid ""
"\n"
"gtkdocize || exit 1\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:521
+#: C/index.docbook:524
msgid ""
"When running <application>gtkdocize</application> it copies <filename>gtk-"
"doc.make</filename> to your project root (or any directory specified by the "
# sebras: e.g. because of,... it can be...any files in tmpl...and is migrating...<symbol> or <function>? gtkdoc or GTK-Doc
#. (itstool) path: sect1/para
-#: C/index.docbook:530
+#: C/index.docbook:533
msgid ""
"Historically GTK-Doc was generating template files where developers entered "
"the docs. This turned out to be not so good (e.g. the need for having "
#. (itstool) path: sect1/title
#. (itstool) path: example/title
-#: C/index.docbook:547 C/index.docbook:564
+#: C/index.docbook:550 C/index.docbook:567
msgid "Running the doc build"
msgstr "Att köra dokumentationsbygget"
#. (itstool) path: sect1/para
-#: C/index.docbook:549
+#: C/index.docbook:552
msgid ""
"After the previous steps it's time to run the build. First we need to rerun "
"<filename>autogen.sh</filename>. If this script runs configure for you, then "
"<filename>configure</filename> med denna flagga efteråt."
#. (itstool) path: sect1/para
-#: C/index.docbook:556
+#: C/index.docbook:559
msgid ""
"The first make run generates several additional files in the doc-"
"directories. The important ones are: <filename><package>.types</"
"sections.txt</filename>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:565
+#: C/index.docbook:568
#, no-wrap
msgid ""
"\n"
"make\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:571
+#: C/index.docbook:574
msgid ""
"Now you can point your browser to <filename>docs/reference/<package>/"
"index.html</filename>. Yes, it's a bit disappointing still. But hang-on, "
"nästa kapitel kommer vi att berätta för dig hur du fyller sidorna med liv."
#. (itstool) path: sect1/title
-#: C/index.docbook:579
+#: C/index.docbook:582
msgid "Integration with version control systems"
msgstr "Integrering med versionshanteringssystem"
#. (itstool) path: sect1/para
-#: C/index.docbook:581
+#: C/index.docbook:584
msgid ""
"As a rule of thumb, it's the files you edit which should go under version "
"control. For typical projects it's these files: <filename><package>."
"filename>."
#. (itstool) path: sect1/para
-#: C/index.docbook:589
+#: C/index.docbook:592
msgid ""
"Files in the <filename>xml/</filename> and <filename>html/</filename> "
"directories should not go under version control. Neither should any of the "
"filerna."
#. (itstool) path: sect1/title
-#: C/index.docbook:597
+#: C/index.docbook:600
msgid "Integration with plain makefiles or other build systems"
msgstr "Integrering med vanliga makefiler eller andra byggsystem"
#. (itstool) path: sect1/para
-#: C/index.docbook:599
+#: C/index.docbook:602
msgid ""
"In the case one does not want to use automake and therefore <filename>gtk-"
"doc.mak</filename> one will need to call the gtkdoc tools in the right order "
"verktygen i rätt ordning i sina egna makefiler (eller andra byggverktyg)."
#. (itstool) path: example/title
-#: C/index.docbook:606
+#: C/index.docbook:609
msgid "Documentation build steps"
msgstr "Byggsteg för dokumentation"
#. (itstool) path: example/programlisting
-#: C/index.docbook:607
+#: C/index.docbook:610
#, no-wrap
msgid ""
"\n"
"gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:621
+#: C/index.docbook:624
msgid ""
"One will need to look at the <filename>Makefile.am</filename> and "
"<filename>gtk-doc.mak</filename> to pick the extra options needed."
"behövs."
#. (itstool) path: sect1/title
-#: C/index.docbook:628
+#: C/index.docbook:631
msgid "Integration with CMake build systems"
msgstr "Integrering med CMake-byggsystem"
#. (itstool) path: sect1/para
-#: C/index.docbook:630
+#: C/index.docbook:633
msgid ""
"GTK-Doc now provides a <filename>GtkDocConfig.cmake</filename> module (and "
"the corresponding <filename>GtkDocConfigVersion.cmake</filename> module). "
"kommando som du kan ställa in i din <filename>CMakeLists.txt</filename>-fil."
#. (itstool) path: example/title
-#: C/index.docbook:640
+#: C/index.docbook:643
msgid "Example of using GTK-Doc from CMake"
msgstr "Exempel på användning av GTK-Doc från CMake"
#. (itstool) path: example/programlisting
-#: C/index.docbook:641
+#: C/index.docbook:644
#, no-wrap
msgid ""
"\n"
" DESTINATION ${CMAKE_INSTALL_DOCDIR})\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:638
+#: C/index.docbook:641
msgid "The following example shows how to use this command. <_:example-1/>"
msgstr ""
"Det följande exemplet visar hur du använder detta kommando. <_:example-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:666
+#: C/index.docbook:669
msgid "Documenting the code"
msgstr "Att dokumentera koden"
#. (itstool) path: chapter/para
-#: C/index.docbook:668
+#: C/index.docbook:671
msgid ""
"GTK-Doc uses source code comment with a special syntax for code "
"documentation. Further it retrieves information about your project structure "
"syntaxen i kommentarerna."
#. (itstool) path: note/title
-#: C/index.docbook:676
+#: C/index.docbook:679
msgid "Documentation placement"
msgstr "Dokumentationsplacering"
#. (itstool) path: note/para
-#: C/index.docbook:677
+#: C/index.docbook:680
msgid ""
"In the past most documentation had to be filled into files residing inside "
"the <filename>tmpl</filename> directory. This has the disadvantages that the "
"konflikter med versionshanteringssystem."
#. (itstool) path: note/para
-#: C/index.docbook:683
+#: C/index.docbook:686
msgid ""
"The avoid the aforementioned problems we suggest putting the documentation "
"inside the sources. This manual will only describe this way of documenting "
"dokumentera kod."
#. (itstool) path: example/title
-#: C/index.docbook:694 C/index.docbook:720
+#: C/index.docbook:697 C/index.docbook:723
msgid "GTK-Doc comment block"
msgstr "GTK-Doc-kommentarsblock"
#. (itstool) path: example/programlisting
-#: C/index.docbook:695
+#: C/index.docbook:698
#, no-wrap
msgid ""
"\n"
"#endif\n"
#. (itstool) path: chapter/para
-#: C/index.docbook:690
+#: C/index.docbook:693
msgid ""
"The scanner can handle the majority of C headers fine. In the case of "
"receiving warnings from the scanner that look like a special case, one can "
"Doc att hoppa över dem. <_:example-1/>"
#. (itstool) path: note/title
-#: C/index.docbook:704
+#: C/index.docbook:707
msgid "Limitations"
msgstr "Begränsningar"
# sebras: no 's in the original
#. (itstool) path: note/para
-#: C/index.docbook:705
+#: C/index.docbook:708
msgid ""
"Note, that GTK-Doc's supports <code>#ifndef(__GTK_DOC_IGNORE__)</code> but "
"not <code>#if !defined(__GTK_DOC_IGNORE__)</code> or other combinations."
"inte <code>#if !defined(__GTK_DOC_IGNORE__)</code> eller andra kombinationer."
#. (itstool) path: sect1/title
-#: C/index.docbook:715
+#: C/index.docbook:718
msgid "Documentation comments"
msgstr "Dokumentationskommentarer"
#. (itstool) path: example/programlisting
-#: C/index.docbook:721
+#: C/index.docbook:724
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:717
+#: C/index.docbook:720
msgid ""
"A multiline comment that starts with an additional '*' marks a documentation "
"block that will be processed by the GTK-Doc tools. <_:example-1/>"
"example-1/>"
#. (itstool) path: sect1/para
-#: C/index.docbook:730
+#: C/index.docbook:733
msgid ""
"The 'identifier' is one line with the name of the item the comment is "
"related to. The syntax differs a little depending on the item. (TODO add "
"till tabell som visar identifierare)"
#. (itstool) path: sect1/para
-#: C/index.docbook:736
+#: C/index.docbook:739
msgid ""
"The 'documentation' block is also different for each symbol type. Symbol "
"types that get parameters such as functions or macros have the parameter "
"användbart i förformaterad text (kodlistningar)."
#. (itstool) path: listitem/para
-#: C/index.docbook:753
+#: C/index.docbook:756
msgid ""
"What it is: The name for a class or function can sometimes be misleading for "
"people coming from a different background."
"vilseledande för personer med annan bakgrund."
#. (itstool) path: listitem/para
-#: C/index.docbook:759
+#: C/index.docbook:762
msgid ""
"What it does: Tell about common uses. Put it in relation with the other API."
msgstr ""
"det andra API:t."
#. (itstool) path: tip/para
-#: C/index.docbook:749
+#: C/index.docbook:752
msgid "When documenting code, describe two aspects: <_:itemizedlist-1/>"
msgstr "När du dokumenterar kod, beskriv två aspekter: <_:itemizedlist-1/>"
#. (itstool) path: listitem/para
-#: C/index.docbook:774
+#: C/index.docbook:777
msgid "Use function() to refer to functions or macros which take arguments."
msgstr ""
"Använd funktion() för att referera till funktioner eller makron som tar "
"argument."
#. (itstool) path: listitem/para
-#: C/index.docbook:779
+#: C/index.docbook:782
msgid ""
"Use @param to refer to parameters. Also use this when referring to "
"parameters of other functions, related to the one being described."
"beskrivs."
#. (itstool) path: listitem/para
-#: C/index.docbook:785
+#: C/index.docbook:788
msgid "Use %constant to refer to a constant, e.g. %G_TRAVERSE_LEAFS."
msgstr ""
"Använd %konstant för att referera till en konstant, t.ex. %G_TRAVERSE_LEAFS."
#. (itstool) path: listitem/para
-#: C/index.docbook:790
+#: C/index.docbook:793
msgid ""
"Use #symbol to refer to other types of symbol, e.g. structs and enums and "
"macros which don't take arguments."
"strukturer eller uppräkningar och makron som inte tar argument."
#. (itstool) path: listitem/para
-#: C/index.docbook:796
+#: C/index.docbook:799
msgid "Use #Object::signal to refer to a GObject signal."
msgstr "Använd #Objekt::signal för att referera till en GObject-signal."
#. (itstool) path: listitem/para
-#: C/index.docbook:801
+#: C/index.docbook:804
msgid "Use #Object:property to refer to a GObject property."
msgstr "Använd #Objekt:egenskap för att referera till en GObject-egenskap."
#. (itstool) path: listitem/para
-#: C/index.docbook:806
+#: C/index.docbook:809
msgid ""
"Use #Struct.field to refer to a field inside a structure and #GObjectClass."
"foo_bar() to refer to a vmethod."
"#GObjectKlass.foo_bar() för att referera till en virtuell metod."
#. (itstool) path: sect1/para
-#: C/index.docbook:768
+#: C/index.docbook:771
msgid ""
"One advantage of hyper-text over plain-text is the ability to have links in "
"the document. Writing the correct markup for a link can be tedious though. "
"förkortningar. <_:itemizedlist-1/>"
#. (itstool) path: tip/para
-#: C/index.docbook:815
+#: C/index.docbook:818
msgid ""
"If you need to use the special characters '<', '>', '()', '@', '%', or "
"'#' in your documentation without GTK-Doc changing them you can use the XML "
"kontrollsekvensen ”\\”."
#. (itstool) path: sect1/para
-#: C/index.docbook:824
+#: C/index.docbook:827
msgid ""
"DocBook can do more than just links. One can also have lists, examples, "
"headings, and images. As of version 1.20, the preferred way is to use a "
"ett bindestreck."
#. (itstool) path: sect1/para
-#: C/index.docbook:835
+#: C/index.docbook:838
msgid ""
"While markdown is now preferred one can mix both. One limitation here is "
"that one can use docbook xml within markdown, but markdown within docbook "
"inte."
#. (itstool) path: sect1/para
-#: C/index.docbook:841
+#: C/index.docbook:844
msgid ""
"In older GTK-Doc releases, if you need support for additional formatting, "
"you would need to enable the usage of docbook XML tags inside doc-comments "
# sebras: markdown or Markdown?
#. (itstool) path: example/title
-#: C/index.docbook:850
+#: C/index.docbook:853
msgid "GTK-Doc comment block using Markdown"
msgstr "GTK-Doc-kommentarsblock som använder Markdown"
#. (itstool) path: example/programlisting
-#: C/index.docbook:851
+#: C/index.docbook:854
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:890
+#: C/index.docbook:893
msgid ""
"More examples of what markdown tags are supported can be found in the <ulink "
"url=\"https://wiki.gnome.org/Projects/GTK%2B/DocumentationSyntax/Markdown"
"\">Referensen för GTK+-dokumentationens markdown-syntax</ulink>."
#. (itstool) path: tip/para
-#: C/index.docbook:896
+#: C/index.docbook:899
msgid ""
"As already mentioned earlier GTK-Doc is for documenting public API. Thus one "
"cannot write documentation for static symbols. Nevertheless it is good to "
"ställe i avsnittsfilen."
#. (itstool) path: sect1/title
-#: C/index.docbook:910
+#: C/index.docbook:913
msgid "Documenting sections"
msgstr "Dokumentationsavsnitt"
#. (itstool) path: sect1/para
-#: C/index.docbook:912
+#: C/index.docbook:915
msgid ""
"Each section of the documentation contains information about one class or "
"module. To introduce the component one can write a section block. The short "
"valfria."
#. (itstool) path: example/title
-#: C/index.docbook:920
+#: C/index.docbook:923
msgid "Section comment block"
msgstr "Kommentarsblock för avsnitt"
#. (itstool) path: example/programlisting
-#: C/index.docbook:921
+#: C/index.docbook:924
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:940
+#: C/index.docbook:943
msgid "SECTION:<name>"
msgstr "SECTION:<namn>"
#. (itstool) path: listitem/para
-#: C/index.docbook:942
+#: C/index.docbook:945
msgid ""
"The name links the section documentation to the respective part in the "
"<filename><package>-sections.txt</filename> file. The name given here "
"filename>."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:951
+#: C/index.docbook:954
msgid "@short_description"
msgstr "@short_description"
#. (itstool) path: listitem/para
-#: C/index.docbook:953
+#: C/index.docbook:956
msgid ""
"A one line description of the section, that later will appear after the "
"links in the TOC and at the top of the section page."
"innehållsförteckningen och lägst upp på avsnittssidan."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:960
+#: C/index.docbook:963
msgid "@title"
msgstr "@title"
#. (itstool) path: listitem/para
-#: C/index.docbook:962
+#: C/index.docbook:965
msgid ""
"The section title defaults to <name> from the SECTION declaration. It "
"can be overridden with the @title field."
"kan åsidosättas med fältet @title."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:969
+#: C/index.docbook:972
msgid "@section_id"
msgstr "@section_id"
#. (itstool) path: listitem/para
-#: C/index.docbook:971
+#: C/index.docbook:974
msgid ""
"Overrides the use of title as a section identifier. For GObjects the <"
"title> is used as a section_id and for other sections it is <"
"MODULE>-<title>."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:979
+#: C/index.docbook:982
msgid "@see_also"
msgstr "@see_also"
#. (itstool) path: listitem/para
-#: C/index.docbook:981
+#: C/index.docbook:984
msgid "A list of symbols that are related to this section."
msgstr "En lista över symboler som är relaterade till detta avsnitt."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:987
+#: C/index.docbook:990
msgid "@stability"
msgstr "@stability"
#. (itstool) path: listitem/para
-#: C/index.docbook:994
+#: C/index.docbook:997
msgid ""
"Stable - The intention of a Stable interface is to enable arbitrary third "
"parties to develop applications to these interfaces, release them, and have "
"motiverade."
#. (itstool) path: listitem/para
-#: C/index.docbook:1006
+#: C/index.docbook:1009
msgid ""
"Unstable - Unstable interfaces are experimental or transitional. They are "
"typically used to give outside developers early access to new or rapidly "
"programfixversion till nästa."
#. (itstool) path: listitem/para
-#: C/index.docbook:1018
+#: C/index.docbook:1021
msgid ""
"Private - An interface that can be used within the GNOME stack itself, but "
"that is not documented for end-users. Such functions should only be used in "
"på angivna och dokumenterade sätt."
#. (itstool) path: listitem/para
-#: C/index.docbook:1027
+#: C/index.docbook:1030
msgid ""
"Internal - An interface that is internal to a module and does not require "
"end-user documentation. Functions that are undocumented are assumed to be "
"interna."
#. (itstool) path: listitem/para
-#: C/index.docbook:989
+#: C/index.docbook:992
msgid ""
"An informal description of the stability level this API has. We recommend "
"the use of one of these terms: <_:itemizedlist-1/>"
"att använda en av dessa termer: <_:itemizedlist-1/>"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1039
+#: C/index.docbook:1042
msgid "@include"
msgstr "@include"
#. (itstool) path: listitem/para
-#: C/index.docbook:1041
+#: C/index.docbook:1044
msgid ""
"The <literal>#include</literal> files to show in the section synopsis (a "
"comma separated list), overriding the global value from the <link linkend="
"Detta objekt är valfritt."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1050
+#: C/index.docbook:1053
msgid "@image"
msgstr "@image"
#. (itstool) path: listitem/para
-#: C/index.docbook:1052
+#: C/index.docbook:1055
msgid ""
"The image to display at the top of the reference page for this section. This "
"will often be some sort of a diagram to illustrate the visual appearance of "
"klasser. Detta objekt är valfritt."
#. (itstool) path: tip/para
-#: C/index.docbook:1063
+#: C/index.docbook:1066
msgid ""
"To avoid unnecessary recompilation after doc-changes put the section docs "
"into the c-source where possible."
"avsnittsdokumentationen i c-källkoden där möjligt."
#. (itstool) path: sect1/title
-#: C/index.docbook:1072
+#: C/index.docbook:1075
msgid "Documenting symbols"
msgstr "Dokumentationssymboler"
#. (itstool) path: sect1/para
-#: C/index.docbook:1074
+#: C/index.docbook:1077
msgid ""
"Each symbol (function, macro, struct, enum, signal and property) is "
"documented in a separate block. The block is best placed close to the "
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1082 C/index.docbook:1148
+#: C/index.docbook:1085 C/index.docbook:1151
msgid "General tags"
msgstr "Generella taggar"
#. (itstool) path: sect2/para
-#: C/index.docbook:1084
+#: C/index.docbook:1087
msgid ""
"You can add versioning information to all documentation elements to tell "
"when an API was introduced, or when it was deprecated."
"att berätta när ett API introducerats eller blev föråldrat."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1089
+#: C/index.docbook:1092
msgid "Versioning Tags"
msgstr "Versioneringstaggar"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1090
+#: C/index.docbook:1093
msgid "Since:"
msgstr "Since:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1092
+#: C/index.docbook:1095
msgid "Description since which version of the code the API is available."
msgstr ""
"Beskrivning över från och med vilken version av koden som API:t är "
"tillgängligt."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1097
+#: C/index.docbook:1100
msgid "Deprecated:"
msgstr "Deprecated:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1099
+#: C/index.docbook:1102
msgid ""
"Paragraph denoting that this function should no be used anymore. The "
"description should point the reader to the new API."
"Beskrivningen bör peka läsaren vidare till det nya API:t."
#. (itstool) path: sect2/para
-#: C/index.docbook:1107
+#: C/index.docbook:1110
msgid ""
"You can also add stability information to all documentation elements to "
"indicate whether API stability is guaranteed for them for all future minor "
"för dem för alla framtida programfix-versioner av projektet."
#. (itstool) path: sect2/para
-#: C/index.docbook:1113
+#: C/index.docbook:1116
msgid ""
"The default stability level for all documentation elements can be set by "
"passing the <option>--default-stability</option> argument to "
"till <application>gtkdoc-mkdb</application> med endera av värdena nedan."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1119
+#: C/index.docbook:1122
msgid "Stability Tags"
msgstr "Stabilitetstaggar"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1120
+#: C/index.docbook:1123
msgid "Stability: Stable"
msgstr "Stability: Stable"
#. (itstool) path: listitem/para
-#: C/index.docbook:1122
+#: C/index.docbook:1125
msgid ""
"Mark the element as stable. This is for public APIs which are guaranteed to "
"remain stable for all future minor releases of the project."
"projektet."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1129
+#: C/index.docbook:1132
msgid "Stability: Unstable"
msgstr "Stability: Unstable"
#. (itstool) path: listitem/para
-#: C/index.docbook:1131
+#: C/index.docbook:1134
msgid ""
"Mark the element as unstable. This is for public APIs which are released as "
"a preview before being stabilised."
"på förhand innan de blivit stabiliserade."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1137
+#: C/index.docbook:1140
msgid "Stability: Private"
msgstr "Stability: Private"
#. (itstool) path: listitem/para
-#: C/index.docbook:1139
+#: C/index.docbook:1142
msgid ""
"Mark the element as private. This is for interfaces which can be used by "
"tightly coupled modules, but not by arbitrary third parties."
"av tätt sammankopplade moduler, men inte av godtyckliga tredje parter."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1149
+#: C/index.docbook:1152
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1169 C/index.docbook:1179
+#: C/index.docbook:1172 C/index.docbook:1182
msgid "Annotations"
msgstr "Noteringar"
# sebras: was it called verkygstips? verktygshjälp? I forget...
#. (itstool) path: sect2/para
-#: C/index.docbook:1171
+#: C/index.docbook:1174
msgid ""
"Documentation blocks can contain annotation-tags. These tags will be "
"rendered with tooltips describing their meaning. The tags are used by "
"GObjectIntrospection/Annotations\" type=\"http\">wikisidan</ulink>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1180
+#: C/index.docbook:1183
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1201 C/index.docbook:1230
+#: C/index.docbook:1204 C/index.docbook:1233
msgid "Function comment block"
msgstr "Kommentarsblock för funktioner"
#. (itstool) path: listitem/para
-#: C/index.docbook:1207
+#: C/index.docbook:1210
msgid ""
"Document whether returned objects, lists, strings, etc, should be freed/"
"unrefed/released."
"avrefereras/släppas."
#. (itstool) path: listitem/para
-#: C/index.docbook:1213
+#: C/index.docbook:1216
msgid "Document whether parameters can be NULL, and what happens if they are."
msgstr ""
"Dokumentera huruvida parametrar tillåts vara NULL och vad som händer om de "
"är NULL."
#. (itstool) path: listitem/para
-#: C/index.docbook:1218
+#: C/index.docbook:1221
msgid ""
"Mention interesting pre-conditions and post-conditions where appropriate."
msgstr "Nämn intressanta förvillkor och eftervillkor där lämpligt."
#. (itstool) path: sect2/para
-#: C/index.docbook:1203 C/index.docbook:1289
+#: C/index.docbook:1206 C/index.docbook:1292
msgid "Please remember to: <_:itemizedlist-1/>"
msgstr "Kom ihåg att: <_:itemizedlist-1/>"
# sebras: Gtk-doc? GTK-Doc? gtk-doc? macros and functions?
#. (itstool) path: sect2/para
-#: C/index.docbook:1225
+#: C/index.docbook:1228
msgid ""
"Gtk-doc assumes all symbols (macros, functions) starting with '_' are "
"private. They are treated like static functions."
# sebras: how to translate highlight?
#. (itstool) path: example/programlisting
-#: C/index.docbook:1231
+#: C/index.docbook:1234
#, no-wrap
msgid ""
"\n"
" */\n"
#. (itstool) path: variablelist/title
-#: C/index.docbook:1252
+#: C/index.docbook:1255
msgid "Function tags"
msgstr "Funktions-taggar"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1253 C/index.docbook:1460
+#: C/index.docbook:1256 C/index.docbook:1463
msgid "Returns:"
msgstr "Returns:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1255
+#: C/index.docbook:1258
msgid "Paragraph describing the returned result."
msgstr "Stycke som beskriver det returnerade resultatet."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1260
+#: C/index.docbook:1263
msgid "@...:"
msgstr "@...:"
# sebras: variadic?
#. (itstool) path: listitem/para
-#: C/index.docbook:1262
+#: C/index.docbook:1265
msgid ""
"In case the function has variadic arguments, you should use this tag "
"(@Varargs: does also work for historic reasons)."
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1272 C/index.docbook:1274
+#: C/index.docbook:1275 C/index.docbook:1277
msgid "Property comment block"
msgstr "Kommentarsblock för egenskaper"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1275
+#: C/index.docbook:1278
#, no-wrap
msgid ""
"\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1287 C/index.docbook:1306
+#: C/index.docbook:1290 C/index.docbook:1309
msgid "Signal comment block"
msgstr "Kommentarsblock för signaler"
#. (itstool) path: listitem/para
-#: C/index.docbook:1293
+#: C/index.docbook:1296
msgid ""
"Document when the signal is emitted and whether it is emitted before or "
"after other signals."
"efter andra signaler."
#. (itstool) path: listitem/para
-#: C/index.docbook:1299
+#: C/index.docbook:1302
msgid "Document what an application might do in the signal handler."
msgstr "Dokumentera vad ett program kan göra i signalhanteraren."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1307
+#: C/index.docbook:1310
#, no-wrap
msgid ""
"\n"
" *\n"
" * The ::foobarized signal is emitted each time someone tries to foobarize @widget.\n"
" */\n"
-"foo_signals[FOOBARIZE] =\n"
-" g_signal_new (\"foobarize\",\n"
+"foo_signals[FOOBARIZED] =\n"
+" g_signal_new (\"foobarized\",\n"
" ...\n"
msgstr ""
"\n"
" * @foo: någon foo\n"
" * @bar: någon bar\n"
" *\n"
-" * Signalen ::foobarized sänds ut varje gång någon försöker att foobarisera @widget.\n"
+" * Signalen ::foobariserad sänds ut varje gång någon försöker att foobarisera @widget.\n"
" */\n"
"foo_signals[FOOBARIZE] =\n"
-" g_signal_new (\"foobarisera\",\n"
+" g_signal_new (\"foobariserad\",\n"
" ...\n"
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1324 C/index.docbook:1325
+#: C/index.docbook:1327 C/index.docbook:1328
msgid "Struct comment block"
msgstr "Kommentarsblock för strukturer"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1326
+#: C/index.docbook:1329
#, no-wrap
msgid ""
"\n"
"} FooWidget;\n"
#. (itstool) path: sect2/para
-#: C/index.docbook:1341
+#: C/index.docbook:1344
msgid ""
"Use <code>/*< private >*/</code> before the private struct fields you "
"want to hide. Use <code>/*< public >*/</code> for the reverse "
"beteendet."
#. (itstool) path: sect2/para
-#: C/index.docbook:1347
+#: C/index.docbook:1350
msgid ""
"If the first field is \"g_iface\", \"parent_instance\" or \"parent_class\" "
"it will be considered private automatically and doesn't need to be mentioned "
"kommentarsblocket."
#. (itstool) path: sect2/para
-#: C/index.docbook:1353
+#: C/index.docbook:1356
msgid ""
"Struct comment blocks can also be used for GObjects and GObjectClasses. It "
"is usually a good idea to add a comment block for a class, if it has "
#. (itstool) path: sect2/title
#. (itstool) path: example/title
-#: C/index.docbook:1365 C/index.docbook:1366
+#: C/index.docbook:1368 C/index.docbook:1369
msgid "Enum comment block"
msgstr "Kommentarsblock för uppräkningar"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1367
+#: C/index.docbook:1370
#, no-wrap
msgid ""
"\n"
"} Something;\n"
#. (itstool) path: sect2/para
-#: C/index.docbook:1384
+#: C/index.docbook:1387
msgid ""
"Use <code>/*< private >*/</code> before the private enum values you "
"want to hide. Use <code>/*< public >*/</code> for the reverse "
"beteendet."
#. (itstool) path: sect1/title
-#: C/index.docbook:1395
+#: C/index.docbook:1398
msgid "Inline program documentation"
msgstr "Infogad programdokumentation"
# sebras: how to translate inline?
#. (itstool) path: sect1/para
-#: C/index.docbook:1396
+#: C/index.docbook:1399
msgid ""
"You can document programs and their commandline interface using inline "
"documentation."
"dokumentation."
#. (itstool) path: variablelist/title
-#: C/index.docbook:1402
+#: C/index.docbook:1405
msgid "Tags"
msgstr "Taggar"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1404
+#: C/index.docbook:1407
msgid "PROGRAM"
msgstr "PROGRAM"
#. (itstool) path: listitem/para
-#: C/index.docbook:1407
+#: C/index.docbook:1410
msgid "Defines the start of a program documentation."
msgstr "Definierar början av programdokumentationen."
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1414
+#: C/index.docbook:1417
msgid "@short_description:"
msgstr "@short_description:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1416
+#: C/index.docbook:1419
msgid "Defines a short description of the program. (Optional)"
msgstr "Definierar en kort beskrivning av programmet. (Valfritt)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1423
+#: C/index.docbook:1426
msgid "@synopsis:"
msgstr "@synopsis:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1425
+#: C/index.docbook:1428
msgid ""
"Defines the arguments, or list of arguments that the program can take. "
"(Optional)"
"(Valfritt)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1433
+#: C/index.docbook:1436
msgid "@see_also:"
msgstr "@see_also:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1435
+#: C/index.docbook:1438
msgid "See Also manual page section. (Optional)"
msgstr "Se vidare i manualavsnitt. (Valfritt)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1442
+#: C/index.docbook:1445
msgid "@arg:"
msgstr "@arg:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1444
+#: C/index.docbook:1447
msgid "Argument(s) passed to the program and their description. (Optional)"
msgstr ""
"Argument som skickas vidare till programmet och deras beskrivningar. "
"(Valfritt)"
#. (itstool) path: varlistentry/term
-#: C/index.docbook:1451
+#: C/index.docbook:1454
msgid "Description:"
msgstr "Beskrivning:"
#. (itstool) path: listitem/para
-#: C/index.docbook:1453
+#: C/index.docbook:1456
msgid "A longer description of the program."
msgstr "En längre beskrivning av programmet."
#. (itstool) path: listitem/para
-#: C/index.docbook:1462
+#: C/index.docbook:1465
msgid "Specificy what value(s) the program returns. (Optional)"
msgstr "Ange vilka värden programmet returnerar. (Valfritt)"
#. (itstool) path: sect2/title
-#: C/index.docbook:1471
+#: C/index.docbook:1474
msgid "Example of program documentation."
msgstr "Exempel på programdokumentation."
#. (itstool) path: example/title
-#: C/index.docbook:1472
+#: C/index.docbook:1475
msgid "Program documentation block"
msgstr "Dokumentationsblock för program"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1473
+#: C/index.docbook:1476
#, no-wrap
msgid ""
"\n"
"}\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:1499
+#: C/index.docbook:1502
msgid "Useful DocBook tags"
msgstr "Användbara DocBook-taggar"
#. (itstool) path: sect1/para
-#: C/index.docbook:1501
+#: C/index.docbook:1504
msgid ""
"Here are some DocBook tags which are most useful when documenting the code."
msgstr ""
"Här är några DocBook-taggar som är användbara när man dokumenterar koden."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1510
+#: C/index.docbook:1513
#, no-wrap
msgid ""
"\n"
"<link linkend=\"glib-Hash-Tables\">Hashtabeller</link>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1506
+#: C/index.docbook:1509
msgid ""
"To link to another section in the GTK docs: <_:informalexample-1/> The "
"linkend is the SGML/XML id on the top item of the page you want to link to. "
"konverteras till ”-” för att överensstämma med SGML/XML."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1523
+#: C/index.docbook:1526
#, no-wrap
msgid ""
"\n"
"<function>…</function>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1520
+#: C/index.docbook:1523
msgid ""
"To refer to an external function, e.g. a standard C function: <_:"
"informalexample-1/>"
"informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1532
+#: C/index.docbook:1535
#, no-wrap
msgid ""
"\n"
"</example>\n"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1543
+#: C/index.docbook:1546
#, no-wrap
msgid ""
"\n"
"</informalexample>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1529
+#: C/index.docbook:1532
msgid ""
"To include example code: <_:informalexample-1/> or possibly this, for very "
"short code fragments which don't need a title: <_:informalexample-2/> For "
"förkortningen: |[ … ]|"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1562
+#: C/index.docbook:1565
#, no-wrap
msgid ""
"\n"
"</itemizedlist>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1559
+#: C/index.docbook:1562
msgid "To include bulleted lists: <_:informalexample-1/>"
msgstr "För att inkludera punktlistor: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1582
+#: C/index.docbook:1585
#, no-wrap
msgid ""
"\n"
"</note>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1579
+#: C/index.docbook:1582
msgid ""
"To include a note which stands out from the text: <_:informalexample-1/>"
msgstr ""
"För att inkludera en not som skiljer sig från texten: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1595
+#: C/index.docbook:1598
#, no-wrap
msgid ""
"\n"
"<type>unsigned char</type>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1592
+#: C/index.docbook:1595
msgid "To refer to a type: <_:informalexample-1/>"
msgstr "För att refera till en typ: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1604
+#: C/index.docbook:1607
#, no-wrap
msgid ""
"\n"
"<structname>XFontStruct</structname>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1601
+#: C/index.docbook:1604
msgid ""
"To refer to an external structure (not one described in the GTK docs): <_:"
"informalexample-1/>"
"dokumentationen): <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1613
+#: C/index.docbook:1616
#, no-wrap
msgid ""
"\n"
"<structfield>len</structfield>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1610
+#: C/index.docbook:1613
msgid "To refer to a field of a structure: <_:informalexample-1/>"
msgstr "För att referera till ett fält för en struktur: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1622
+#: C/index.docbook:1625
#, no-wrap
msgid ""
"\n"
"<classname>GtkWidget</classname>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1619
+#: C/index.docbook:1622
msgid ""
"To refer to a class name, we could possibly use: <_:informalexample-1/> but "
"you'll probably be using #GtkWidget instead (to automatically create a link "
"\"documenting_syntax\">förkortningarna</link>)."
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1633
+#: C/index.docbook:1636
#, no-wrap
msgid ""
"\n"
"<emphasis>Detta är viktigt</emphasis>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1630
+#: C/index.docbook:1633
msgid "To emphasize text: <_:informalexample-1/>"
msgstr "För att betona text: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1642
+#: C/index.docbook:1645
#, no-wrap
msgid ""
"\n"
"<filename>/home/användare/dokument</filename>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1639
+#: C/index.docbook:1642
msgid "For filenames use: <_:informalexample-1/>"
msgstr "För filnamn använd: <_:informalexample-1/>"
#. (itstool) path: informalexample/programlisting
-#: C/index.docbook:1651
+#: C/index.docbook:1654
#, no-wrap
msgid ""
"\n"
"<keycombo><keycap>Control</keycap><keycap>L</keycap></keycombo>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1648
+#: C/index.docbook:1651
msgid "To refer to keys use: <_:informalexample-1/>"
msgstr "För att referera till tangenter använd: <_:informalexample-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:1661
+#: C/index.docbook:1664
msgid "Filling the extra files"
msgstr "Fylla i de extra filerna"
#. (itstool) path: chapter/para
-#: C/index.docbook:1663
+#: C/index.docbook:1666
msgid ""
"There are a couple of extra files, that need to be maintained along with the "
"inline source code comments: <filename><package>.types</filename>, "
"paket>-sections.txt</filename>."
#. (itstool) path: sect1/title
-#: C/index.docbook:1672
+#: C/index.docbook:1675
msgid "Editing the types file"
msgstr "Redigera typfilen"
#. (itstool) path: sect1/para
-#: C/index.docbook:1674
+#: C/index.docbook:1677
msgid ""
"If your library or application includes GObjects, you want their signals, "
"arguments/parameters and position in the hierarchy to be shown in the "
"package>.types</filename>."
#. (itstool) path: example/title
-#: C/index.docbook:1683
+#: C/index.docbook:1686
msgid "Example types file snippet"
msgstr "Exempel på typfilsnutt"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1684
+#: C/index.docbook:1687
#, no-wrap
msgid ""
"\n"
"gtk_arrow_get_type\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1695
+#: C/index.docbook:1698
msgid ""
"Since GTK-Doc 1.8 <application>gtkdoc-scan</application> can generate this "
"list for you. Just add \"--rebuild-types\" to SCAN_OPTIONS in "
"du inte distribuera typfilen eller versionshantera den."
#. (itstool) path: sect1/title
-#: C/index.docbook:1704
+#: C/index.docbook:1707
msgid "Editing the master document"
msgstr "Redigera huvuddokumentet"
#. (itstool) path: sect1/para
-#: C/index.docbook:1706
+#: C/index.docbook:1709
msgid ""
"GTK-Doc produces documentation in DocBook SGML/XML. When processing the "
"inline source comments, the GTK-Doc tools generate one documentation page "
# sebras: Its -> it's
#. (itstool) path: sect1/para
-#: C/index.docbook:1713
+#: C/index.docbook:1716
msgid ""
"While GTK-Doc creates a template master document for you, later runs will "
"not touch it again. This means that one can freely structure the "
# sebras: for -> from Apart -> together/embedded...
#. (itstool) path: tip/para
-#: C/index.docbook:1723
+#: C/index.docbook:1726
msgid ""
"Do not create tutorials as extra documents. Just write extra chapters. The "
"benefit of directly embedding the tutorial for your library into the API "
"blir uppdaterad tillsammans med biblioteket."
#. (itstool) path: sect1/para
-#: C/index.docbook:1732
+#: C/index.docbook:1735
msgid ""
"So what are the things to change inside the master document? For a start is "
"only a little. There are some placeholders (text in square brackets) there "
"Det finns en del platshållare (text i hakparenteser) som du bör ta hand om."
#. (itstool) path: example/title
-#: C/index.docbook:1739
+#: C/index.docbook:1742
msgid "Master document header"
msgstr "Huvuddokumentets huvud"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1740
+#: C/index.docbook:1743
#, no-wrap
msgid ""
"\n"
" <title>[Infoga titel här]</title>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1756
+#: C/index.docbook:1759
msgid ""
"In addition a few option elements are created in commented form. You can "
"review these and enable them as you like."
"Du kan granska dessa och aktivera dem enligt dina egna önskemål."
#. (itstool) path: example/title
-#: C/index.docbook:1762
+#: C/index.docbook:1765
msgid "Optional part in the master document"
msgstr "Valfri del i huvuddokumentet"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1763
+#: C/index.docbook:1766
#, no-wrap
msgid ""
"\n"
" -->\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1771
+#: C/index.docbook:1774
msgid ""
"Finally you need to add new section whenever you introduce one. The <link "
"linkend=\"modernizing-gtk-doc-1-16\">gtkdoc-check</link> tool will remind "
"infogats i dokumentationen."
#. (itstool) path: example/title
-#: C/index.docbook:1779 C/index.docbook:1814
+#: C/index.docbook:1782 C/index.docbook:1817
msgid "Including generated sections"
msgstr "Inkludera genererade avsnitt"
#. (itstool) path: example/programlisting
-#: C/index.docbook:1780
+#: C/index.docbook:1783
#, no-wrap
msgid ""
"\n"
" ...\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:1792
+#: C/index.docbook:1795
msgid "Editing the section file"
msgstr "Redigera avsnittsfilen"
#. (itstool) path: sect1/para
-#: C/index.docbook:1794
+#: C/index.docbook:1797
msgid ""
"The section file is used to organise the documentation output by GTK-Doc. "
"Here one specifies which symbol belongs to which module or class and control "
"styra synligheten (publik eller privat)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1800
+#: C/index.docbook:1803
msgid ""
"The section file is a plain text file with tags delimiting sections. Blank "
"lines are ignored and lines starting with a '#' are treated as comment lines."
"kommentarsrader."
#. (itstool) path: note/para
-#: C/index.docbook:1807
+#: C/index.docbook:1810
msgid ""
"While the tags make the file look like xml, it is not. Please do not close "
"tags like <SUBSECTION>."
"taggar så som <SUBSECTION>."
#. (itstool) path: example/programlisting
-#: C/index.docbook:1815
+#: C/index.docbook:1818
#, no-wrap
msgid ""
"\n"
"</SECTION>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:1832
+#: C/index.docbook:1835
msgid ""
"The <FILE> ... </FILE> tag is used to specify the file name, "
"without any suffix. For example, using '<FILE>gnome-config</"
"klassnamnet för GObjectet konverterat till gemener)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1844
+#: C/index.docbook:1847
msgid ""
"The <TITLE> ... </TITLE> tag is used to specify the title of the "
"section. It is only useful before the templates (if used) are initially "
"Vidare är detta föråldrat om man använder SECTIONS-kommentarer i källkoden."
#. (itstool) path: sect1/para
-#: C/index.docbook:1851
+#: C/index.docbook:1854
msgid ""
"You can group items in the section by using the <SUBSECTION> tag. "
"Currently it outputs a blank line between subsections in the synopsis "
"beror på om de har publika poster (variabler, virtuella metoder)."
#. (itstool) path: sect1/para
-#: C/index.docbook:1870
+#: C/index.docbook:1873
msgid ""
"You can also use <INCLUDE> ... </INCLUDE> to specify the "
"#include files which are shown in the synopsis sections. It contains a comma-"
"påverka det avsnittet."
#. (itstool) path: chapter/title
-#: C/index.docbook:1884
+#: C/index.docbook:1887
msgid "Controlling the result"
msgstr "Kontrollera resultatet"
#. (itstool) path: chapter/para
-#: C/index.docbook:1886
+#: C/index.docbook:1889
msgid ""
"A GTK-Doc run generates report files inside the documentation directory. The "
"generated files are named: <filename><package>-undocumented.txt</"
"kan visas eller efterbehandlas enkelt."
#. (itstool) path: chapter/para
-#: C/index.docbook:1895
+#: C/index.docbook:1898
msgid ""
"The <filename><package>-undocumented.txt</filename> file starts with "
"the documentation coverage summary. Below are two sections divided by blank "
"dokumentation, men där en ny parameter har lagts till."
#. (itstool) path: chapter/para
-#: C/index.docbook:1904
+#: C/index.docbook:1907
msgid ""
"The <filename><package>-undeclared.txt</filename> file lists symbols "
"given in the <filename><package>-sections.txt</filename> but not found "
"källkoden. Kontrollera om de har tagits bort eller om de är felstavade."
#. (itstool) path: chapter/para
-#: C/index.docbook:1911
+#: C/index.docbook:1914
msgid ""
"The <filename><package>-unused.txt</filename> file lists symbol names, "
"where the GTK-Doc scanner has found documentation, but does not know where "
# sebras: <filename>?
#. (itstool) path: tip/para
-#: C/index.docbook:1919
+#: C/index.docbook:1922
msgid ""
"Enable or add the <option>TESTS=$(GTKDOC_CHECK)</option> line in Makefile."
"am. If at least GTK-Doc 1.9 is installed, this will run sanity checks during "
"köra rimlighetskontroller under körning av <command>make check</command>."
#. (itstool) path: chapter/para
-#: C/index.docbook:1926
+#: C/index.docbook:1929
msgid ""
"One can also look at the files produced by the source code scanner: "
"<filename><package>-decl-list.txt</filename> and <filename><"
"en symbol saknas bör man kontrollera om denna filen innehåller den."
#. (itstool) path: chapter/para
-#: C/index.docbook:1935
+#: C/index.docbook:1938
msgid ""
"If the project is GObject based, one can also look into the files produced "
"by the object scanner: <filename><package>.args.txt</filename>, "
"<command>GTK_DOC_KEEP_INTERMEDIATE=1 make</command>."
#. (itstool) path: chapter/title
-#: C/index.docbook:1950
+#: C/index.docbook:1953
msgid "Modernizing the documentation"
msgstr "Modernisera dokumentationen"
#. (itstool) path: chapter/para
-#: C/index.docbook:1952
+#: C/index.docbook:1955
msgid ""
"GTK-Doc has been around for quite some time. In this section we list new "
"features together with the version since when it is available."
"tillsammans med vilken version de gjordes tillgängliga."
#. (itstool) path: sect1/title
-#: C/index.docbook:1958
+#: C/index.docbook:1961
msgid "GTK-Doc 1.9"
msgstr "GTK-Doc 1.9"
#. (itstool) path: sect1/para
-#: C/index.docbook:1960
+#: C/index.docbook:1963
msgid ""
"When using xml instead of sgml, one can actually name the master document "
"<filename><package>-docs.xml</filename>."
"huvuddokumentet <filename><paket>-docs.xml</filename>."
#. (itstool) path: sect1/para
-#: C/index.docbook:1965
+#: C/index.docbook:1968
msgid ""
"This version supports <option>SCAN_OPTIONS=--rebuild-sections</option> in "
"<filename>Makefile.am</filename>. When this is enabled, the <filename><"
"<code>meld <paket>-decl-list.txt <paket>-sections.txt</code>."
#. (itstool) path: sect1/para
-#: C/index.docbook:1976
+#: C/index.docbook:1979
msgid ""
"Version 1.8 already introduced the syntax for documenting sections in the "
"sources instead of the separate files under <filename class=\"directory"
"filename> så är du klar."
#. (itstool) path: sect1/title
-#: C/index.docbook:1988
+#: C/index.docbook:1991
msgid "GTK-Doc 1.10"
msgstr "GTK-Doc 1.10"
#. (itstool) path: sect1/para
-#: C/index.docbook:1990
+#: C/index.docbook:1993
msgid ""
"This version supports <option>SCAN_OPTIONS=--rebuild-types</option> in "
"<filename>Makefile.am</filename>. When this is enabled, the <filename><"
"filename> för kod som bara byggs ibland."
#. (itstool) path: sect1/title
-#: C/index.docbook:2001
+#: C/index.docbook:2004
msgid "GTK-Doc 1.16"
msgstr "GTK-Doc 1.16"
#. (itstool) path: example/title
-#: C/index.docbook:2007
+#: C/index.docbook:2010
msgid "Enable gtkdoc-check"
msgstr "Aktivera gtkdoc-check"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2008
+#: C/index.docbook:2011
#, no-wrap
msgid ""
"\n"
"endif\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:2003
+#: C/index.docbook:2006
msgid ""
"This version includes a new tool called gtkdoc-check. This tool can run a "
"set of sanity checks on your documentation. It is enabled by adding these "
"am</filename>. <_:example-1/>"
#. (itstool) path: sect1/title
-#: C/index.docbook:2021
+#: C/index.docbook:2024
msgid "GTK-Doc 1.20"
msgstr "GTK-Doc 1.20"
#. (itstool) path: sect1/para
-#: C/index.docbook:2023
+#: C/index.docbook:2026
msgid ""
"Version 1.18 brought some initial markdown support. Using markdown in doc "
"comments is less intrusive than writing docbook xml. This version improves a "
"\">kommentarsyntax</link> finnas alla detaljer."
#. (itstool) path: sect1/title
-#: C/index.docbook:2033
+#: C/index.docbook:2036
msgid "GTK-Doc 1.25"
msgstr "GTK-Doc 1.25"
#. (itstool) path: example/title
-#: C/index.docbook:2043
+#: C/index.docbook:2046
msgid "Use pre-generated entities"
msgstr "Att använda förgenererade entiteter"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2044
+#: C/index.docbook:2047
#, no-wrap
msgid ""
"\n"
" </bookinfo>\n"
#. (itstool) path: sect1/para
-#: C/index.docbook:2035
+#: C/index.docbook:2038
msgid ""
"The makefiles shipped with this version generate an entity file at "
"<filename>xml/gtkdocentities.ent</filename>, containing entities for e.g. "
"använda samma xml-huvud i genererade xml-filer. <_:example-1/>"
#. (itstool) path: chapter/title
-#: C/index.docbook:2069
+#: C/index.docbook:2072
msgid "Documenting other interfaces"
msgstr "Dokumentera andra gränssnitt"
#. (itstool) path: chapter/para
-#: C/index.docbook:2071
+#: C/index.docbook:2074
msgid ""
"So far we have been using GTK-Doc to document the API of code. The next "
"sections contain suggestions how the tools can be used to document other "
"också dokumentera andra gränssnitt."
#. (itstool) path: sect1/title
-#: C/index.docbook:2078
+#: C/index.docbook:2081
msgid "Command line options and man pages"
msgstr "Kommandoradsflaggor och mansidor"
#. (itstool) path: sect1/para
-#: C/index.docbook:2080
+#: C/index.docbook:2083
msgid ""
"As one can generate man pages for a docbook refentry as well, it sounds like "
"a good idea to use it for that purpose. This way the interface is part of "
"gränssnittet att vara en del av referensen och man får mansidan gratis."
#. (itstool) path: sect2/title
-#: C/index.docbook:2087
+#: C/index.docbook:2090
msgid "Document the tool"
msgstr "Dokumentera verktyget"
# sebras: strange English
#. (itstool) path: sect2/para
-#: C/index.docbook:2089
+#: C/index.docbook:2092
msgid ""
"Create one refentry file per tool. Following <link linkend="
"\"settingup_docfiles\">our example</link> we would call it <filename>meep/"
"väl som exempel i glib."
#. (itstool) path: sect2/title
-#: C/index.docbook:2099
+#: C/index.docbook:2102
msgid "Adding the extra configure check"
msgstr "Lägga till den extra configure-kontrollen"
#. (itstool) path: example/title
-#: C/index.docbook:2102 C/index.docbook:2120
+#: C/index.docbook:2105 C/index.docbook:2123
msgid "Extra configure checks"
msgstr "Lägga till extra configure-kontroller"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2103
+#: C/index.docbook:2106
#, no-wrap
msgid ""
"\n"
"AM_CONDITIONAL(ENABLE_MAN, test x$enable_man != xno)\n"
#. (itstool) path: sect2/title
-#: C/index.docbook:2117
+#: C/index.docbook:2120
msgid "Adding the extra makefile rules"
msgstr "Lägga till de extra makefilsreglerna"
#. (itstool) path: example/programlisting
-#: C/index.docbook:2121
+#: C/index.docbook:2124
#, no-wrap
msgid ""
"\n"
"EXTRA_DIST += meep.xml\n"
#. (itstool) path: sect1/title
-#: C/index.docbook:2143
+#: C/index.docbook:2146
msgid "DBus interfaces"
msgstr "DBus-gränssnitt"
#. (itstool) path: sect1/para
-#: C/index.docbook:2145
+#: C/index.docbook:2148
msgid ""
"(FIXME: http://hal.freedesktop.org/docs/DeviceKit/DeviceKit.html, http://"
"cgit.freedesktop.org/DeviceKit/DeviceKit/tree/doc/dbus)"
"cgit.freedesktop.org/DeviceKit/DeviceKit/tree/doc/dbus)"
#. (itstool) path: chapter/title
-#: C/index.docbook:2154
+#: C/index.docbook:2157
msgid "Frequently asked questions"
msgstr "Frågor och svar"
#. (itstool) path: segmentedlist/segtitle
-#: C/index.docbook:2158
+#: C/index.docbook:2161
msgid "Question"
msgstr "Fråga"
#. (itstool) path: segmentedlist/segtitle
-#: C/index.docbook:2159
+#: C/index.docbook:2162
msgid "Answer"
msgstr "Svar"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2161
+#: C/index.docbook:2164
msgid "No class hierarchy."
msgstr "Ingen klasshierarki."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2162
+#: C/index.docbook:2165
msgid ""
"The objects <function>xxx_get_type()</function> function has not been "
"entered into the <filename><package>.types</filename> file."
"filen <filename><paket>.types</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2168
+#: C/index.docbook:2171
msgid "Still no class hierarchy."
msgstr "Fortfarande ingen klasshierarki."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2169
+#: C/index.docbook:2172
msgid ""
"Missing or wrong naming in <filename><package>-sections.txt</filename> "
"file (see <ulink url=\"http://mail.gnome.org/archives/gtk-doc-list/2003-"
"October/msg00006.html\">förklaring</ulink>)."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2175
+#: C/index.docbook:2178
msgid "Damn, I have still no class hierarchy."
msgstr "Förbannat, jag har fortfarande ingen klasshierarki."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2176
+#: C/index.docbook:2179
msgid ""
"Is the object name (name of the instance struct, e.g. <type>GtkWidget</"
"type>) part of the normal section (don't put this into Standard or Private "
"Standard eller Private)."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2183
+#: C/index.docbook:2186
msgid "No symbol index."
msgstr "Inget symbolindex."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2184
+#: C/index.docbook:2187
msgid ""
"Does the <filename><package>-docs.{xml,sgml}</filename> contain a "
"index that xi:includes the generated index?"
"inkluderar det genererade indexet med xi:include?"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2190
+#: C/index.docbook:2193
msgid "Symbols are not linked to their doc-section."
msgstr "Symboler är inte länkade till deras dokumentationsavsnitt."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2191
+#: C/index.docbook:2194
msgid ""
"Is the doc-comment using the correct markup (added #,% or ())? Check if the "
"gtkdoc-fixxref warns about unresolvable xrefs."
"korsreferenser."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2197
+#: C/index.docbook:2200
msgid "A new class does not appear in the docs."
msgstr "En ny klass dyker inte upp i dokumentationen."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2198
+#: C/index.docbook:2201
msgid ""
"Is the new page xi:included from <filename><package>-docs.{xml,sgml}</"
"filename>."
"docs.{xml,sgml}</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2204
+#: C/index.docbook:2207
msgid "A new symbol does not appear in the docs."
msgstr "En ny symbol dyker inte upp i dokumentationen."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2205
+#: C/index.docbook:2208
msgid ""
"Is the doc-comment properly formatted. Check for spelling mistakes in the "
"begin of the comment. Check if the gtkdoc-fixxref warns about unresolvable "
"paket>-sections.txt</filename> i ett publikt avsnitt."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2213
+#: C/index.docbook:2216
msgid "A type is missing from the class hierarchy."
msgstr "En typ saknas från klasshierarkin."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2214
+#: C/index.docbook:2217
msgid ""
"If the type is listed in <filename><package>.hierarchy</filename> but "
"not in <filename>xml/tree_index.sgml</filename> then double check that the "
"privat kommer den inte att visas."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2223
+#: C/index.docbook:2226
msgid "I get foldoc links for all gobject annotations."
msgstr "Jag får foldoc-länkar för alla gobject-noteringar."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2224
+#: C/index.docbook:2227
msgid ""
"Check that <filename>xml/annotation-glossary.xml</filename> is xi:included "
"from <filename><package>-docs.{xml,sgml}</filename>."
"filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2232
+#: C/index.docbook:2235
msgid "Parameter described in source code comment block but does not exist"
msgstr "Parameter beskriven i kommentarsblock i källkoden men existerar inte"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2233
+#: C/index.docbook:2236
msgid ""
"Check if the prototype in the header has different parameter names as in the "
"source."
"Kontrollera om prototypen i huvudet har andra parameternamn än i källkoden."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2238
+#: C/index.docbook:2241
msgid "multiple \"IDs\" for constraint linkend: XYZ"
msgstr "multipla ”ID:n” för begränsat länkslut: XYZ"
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2239
+#: C/index.docbook:2242
msgid ""
"Symbol XYZ appears twice in <filename><package>-sections.txt</"
"filename> file."
"txt</filename>."
#. (itstool) path: seglistitem/seg
-#: C/index.docbook:2242
+#: C/index.docbook:2245
msgid ""
"Element typename in namespace '' encountered in para, but no template "
"matches."
msgstr "Elementtypnamn i namnrymd ”” påträffat i para, men ingen mall matchar."
#. (itstool) path: chapter/title
-#: C/index.docbook:2249
+#: C/index.docbook:2252
msgid "Tools related to gtk-doc"
msgstr "Verktyg relaterade till gtk-doc"
#. (itstool) path: chapter/para
-#: C/index.docbook:2251
+#: C/index.docbook:2254
msgid ""
"GtkDocPlugin - a <ulink url=\"http://trac-hacks.org/wiki/GtkDocPlugin\">Trac "
"GTK-Doc</ulink> integration plugin, that adds API docs to a trac site and "
"dokumentation till en trac-webbplats och integrerar med trac-sökningen."
#. (itstool) path: chapter/para
-#: C/index.docbook:2256
+#: C/index.docbook:2259
msgid ""
"Gtkdoc-depscan - a tool (part of gtk-doc) to check used API against since "
"tags in the API to determine the minimum required version."
"vald, fri programvarulicens, som till exempel <_:ulink-1/>, för att "
"möjliggöra deras användning i fri programvara."
+#~ msgid "<guilabel>Python</guilabel> - optional - for gtkdoc-depscan"
+#~ msgstr "<guilabel>Python</guilabel> - valfritt - för gtkdoc-depscan"
+
#~ msgid ""
#~ "<guilabel>Generating the \"template\" files.</guilabel> "
#~ "<application>gtkdoc-mktmpl</application> creates a number of files in the "
<revhistory>
<revision>
- <revnumber>1.25.1</revnumber>
- <date>21 March 2016</date>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
<authorinitials>ss</authorinitials>
- <revremark>development version</revremark>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision>
+ <revnumber>1.26</revnumber>
+ <date>11 Aug 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>port all tools from perl/bash to python</revremark>
</revision>
<revision>
<revnumber>1.25</revnumber>
<para>ஜிடிகே டாக் வேலை செய்வதெப்படி எனில் சிறப்பு ஒழுங்கில் விமர்சன தொகுதிகளாக செயல்களின் ஆவணங்கள் மூல கோப்புகளில் வைக்கப்படும். அல்லது ஜிடிகே டாக் பயன்படுத்தும் டெம்ப் கோப்புகளுக்கு சேர்க்கபடும். (ஆயினும் ஜிடிகே டாக் தலைப்பு கோப்புகளில் அறுதியிட்ட பங்ஷன்களை மட்டுமே ஆவணப்படுத்தும். நிலையான பங்க்ஷன்களுக்கு வெளியீடு தராது)</para>
- <para>ஜிடிகே டாக் இல் பல பெர்ல் குறுநிரல்கள் உள்ளன. </para>
+ <para>
+ GTK-Doc consists of a number of python scripts, each performing a different step
+ in the process.
+ </para>
<para>இந்த நடப்பில் ஐந்து படிகள் உள்ளன</para>
<sect2 id="requirements">
<title>முன் தேவைகள்</title>
<para>
- <guilabel>Perl v5</guilabel> - the main scripts are in Perl.
+ <guilabel>python 2/3</guilabel> - the main scripts are written in python.
</para>
<para>
<guilabel>xsltproc</guilabel> - the xslt processor from libxslt
<ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>
</para>
<para>
- <guilabel>Python</guilabel> - optional - for gtkdoc-depscan
- </para>
- <para>
One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> or
<guilabel>vim</guilabel> - optional - used for syntax highlighting of examples
</para>
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
]]></programlisting>
</example>
<revhistory>
<revision>
- <revnumber>1.25.1</revnumber>
- <date>21 March 2016</date>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
<authorinitials>ss</authorinitials>
- <revremark>development version</revremark>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision>
+ <revnumber>1.26</revnumber>
+ <date>11 Aug 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>port all tools from perl/bash to python</revremark>
</revision>
<revision>
<revnumber>1.25</revnumber>
<para>GTK-Doc అనునది మూలపు(సోర్స్) ఫైళ్ళ యొక్క ఫంక్షన్స్ నందు ప్రత్యేకించి-రూపొందించిన కామెంట్ బ్లాక్స్ నందలి పత్రికీకరణను వుపయోగించి పనిచేయును, లేదా GTK-Doc వుపయోగించే మాదిరి(టెంప్లేట్) ఫైళ్ళకు జతచేసిన పత్రికీకరణను వుపయోగించును (GTK-Doc హెడర్ ఫైళ్ళ నందు డిక్లేర్ చేసివున్న ఫంక్షన్లకు మాత్రమే పత్రికీకరణ యిచ్చును; అది స్టాటిక్ ఫంక్షన్ల కొరకు అవుట్పుట్ అందించదు).</para>
- <para>GTK-Doc చాలా పెర్ల్ స్క్రిప్టులను కలిగివుంది, ప్రతిది వేరువేరు స్టెప్పును కార్యక్రమమునందు జరుపును.</para>
+ <para>
+ GTK-Doc consists of a number of python scripts, each performing a different step
+ in the process.
+ </para>
<para>అక్కడ కార్యక్రమమునందు 5 ముఖ్య స్టెప్పులు వున్నవి:</para>
<sect2 id="requirements">
<title>అవసరములు</title>
- <para><guilabel>Perl v5</guilabel> - ముఖ్య స్క్రిప్టులు Perl1 నందు వున్నవి.</para>
+ <para>
+ <guilabel>python 2/3</guilabel> - the main scripts are written in python.
+ </para>
<para>
<guilabel>xsltproc</guilabel> - the xslt processor from libxslt
<ulink url="http://xmlsoft.org/XSLT/" type="http">xmlsoft.org/XSLT/</ulink>
<ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>
</para>
<para>
- <guilabel>Python</guilabel> - optional - for gtkdoc-depscan
- </para>
- <para>
One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> or
<guilabel>vim</guilabel> - optional - used for syntax highlighting of examples
</para>
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
]]></programlisting>
</example>
<revhistory>
<revision>
- <revnumber>1.25.1</revnumber>
- <date>21 March 2016</date>
+ <revnumber>1.27</revnumber>
+ <date>07 Dec 2017</date>
<authorinitials>ss</authorinitials>
- <revremark>development version</revremark>
+ <revremark>fine tuning of the python port</revremark>
+ </revision>
+ <revision>
+ <revnumber>1.26</revnumber>
+ <date>11 Aug 2017</date>
+ <authorinitials>ss</authorinitials>
+ <revremark>port all tools from perl/bash to python</revremark>
</revision>
<revision>
<revnumber>1.25</revnumber>
are declared in header files; it won't produce output for static functions).
</para>
- <para>GTK-Doc由一些perl脚本组成，每个脚本完成这一过程中不同的步骤。</para>
+ <para>
+ GTK-Doc consists of a number of python scripts, each performing a different step
+ in the process.
+ </para>
<para>这个进程有五个主要步骤：</para>
<sect2 id="requirements">
<title>要求</title>
- <para><guilabel>Perl v5</guilabel>- 主脚本是Perl格式。</para>
+ <para>
+ <guilabel>python 2/3</guilabel> - the main scripts are written in python.
+ </para>
<para>
<guilabel>xsltproc</guilabel> - the xslt processor from libxslt
<ulink url="http://xmlsoft.org/XSLT/" type="http">xmlsoft.org/XSLT/</ulink>
<ulink url="http://sourceforge.net/projects/docbook/files/docbook-xsl/" type="http">sourceforge.net/projects/docbook/files/docbook-xsl</ulink>
</para>
<para>
- <guilabel>Python</guilabel> - optional - for gtkdoc-depscan
- </para>
- <para>
One of <guilabel>source-highlight</guilabel>, <guilabel>highlight</guilabel> or
<guilabel>vim</guilabel> - optional - used for syntax highlighting of examples
</para>
*
* The ::foobarized signal is emitted each time someone tries to foobarize @widget.
*/
-foo_signals[FOOBARIZE] =
- g_signal_new ("foobarize",
+foo_signals[FOOBARIZED] =
+ g_signal_new ("foobarized",
...
]]></programlisting>
</example>
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
# modifications, as long as this notice is preserved.
m4_define([_LT_COPYING], [dnl
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
])
-# serial 57 LT_INIT
+# serial 58 LT_INIT
# LT_PREREQ(VERSION)
# LT_INIT([OPTIONS])
# ------------------
AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
_LT_SET_OPTIONS([$0], [$1])
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+# _LT_PREPARE_CC_BASENAME
+# -----------------------
+m4_defun([_LT_PREPARE_CC_BASENAME], [
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in @S|@*""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+])# _LT_PREPARE_CC_BASENAME
+
+
# _LT_CC_BASENAME(CC)
# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
+# but that macro is also expanded into generated libtool script, which
+# arranges for $SED and $ECHO to be set by different means.
m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+[m4_require([_LT_PREPARE_CC_BASENAME])dnl
+AC_REQUIRE([_LT_DECL_SED])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+func_cc_basename $1
+cc_basename=$func_cc_basename_result
])
# _LT_FILEUTILS_DEFAULTS
# ----------------------
# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
m4_defun([_LT_FILEUTILS_DEFAULTS],
[: ${CP="cp -f"}
: ${MV="mv -f"}
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_WITH_SYSROOT])dnl
+m4_require([_LT_CMD_TRUNCATE])dnl
_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
])
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
+ if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
# _LT_PROG_LTMAIN
# ---------------
-# Note that this code is called both from `configure', and `config.status'
+# Note that this code is called both from 'configure', and 'config.status'
# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# 'config.status' has no value for ac_aux_dir unless we are using Automake,
# so we pass a copy along to make sure it has a sensible value anyway.
m4_defun([_LT_PROG_LTMAIN],
[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
])# _LT_PROG_LTMAIN
# So that we can recreate a full libtool script including additional
# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
+# in macros and then make a single call at the end using the 'libtool'
# label.
# _LT_CONFIG_STATUS_DECLARE([VARNAME])
# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'. VARNAME
+# Quote a variable value, and forward it to 'config.status' so that its
+# declaration there will have the same value as in 'configure'. VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
# Output comment and list of tags supported by the script
m4_defun([_LT_LIBTOOL_TAGS],
[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
+available_tags='_LT_TAGS'dnl
])
# _LT_LIBTOOL_CONFIG_VARS
# -----------------------
# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
# section) are produced by _LT_LIBTOOL_TAG_VARS.
m4_defun([_LT_LIBTOOL_CONFIG_VARS],
# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
# variables for single and double quote escaping we saved from calls
# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'. Finally, any additional code accumulated
+# into 'config.status', and then the shell code to quote escape them in
+# for loops in 'config.status'. Finally, any additional code accumulated
# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
m4_defun([_LT_CONFIG_COMMANDS],
[AC_PROVIDE_IFELSE([LT_OUTPUT],
]], lt_decl_quote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
]], lt_decl_dquote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
# Generate a child script FILE with all initialization necessary to
# reuse the environment learned by the parent script, and make the
# file executable. If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins. After this
+# '#!' sequence but before initialization text begins. After this
# macro, additional text can be appended to FILE to form the body of
# the child script. The macro ends with non-zero status if the
# file could not be fully written (such as if the disk is full).
_AS_PREPARE
exec AS_MESSAGE_FD>&1
_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
+test 0 = "$lt_write_fail" && chmod +x $1[]dnl
m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
# LT_OUTPUT
} >&AS_MESSAGE_LOG_FD
lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
+'$as_me' creates a local libtool stub from the current configuration,
for use in further configure time tests before the real libtool is
generated.
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
-while test $[#] != 0
+while test 0 != $[#]
do
case $[1] in
--version | --v* | -V )
lt_cl_silent=: ;;
-*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
*) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
esac
shift
done
# open by configure. Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
lt_cl_success=:
-test "$silent" = yes &&
+test yes = "$silent" &&
lt_config_lt_args="$lt_config_lt_args --quiet"
exec AS_MESSAGE_LOG_FD>/dev/null
$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
_LT_CONFIG_SAVE_COMMANDS([
m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
m4_if(_LT_TAG, [C], [
- # See if we are running on zsh, and set the options which allow our
+ # See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
+ if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
- cfgfile="${ofile}T"
+ cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# Generated automatically by $as_me ($PACKAGE) $VERSION
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
_LT_COPYING
_LT_LIBTOOL_TAGS
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
# ### BEGIN LIBTOOL CONFIG
_LT_LIBTOOL_CONFIG_VARS
_LT_LIBTOOL_TAG_VARS
_LT_EOF
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_PREPARE_MUNGE_PATH_LIST
+_LT_PREPARE_CC_BASENAME
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
- _LT_PROG_REPLACE_SHELLFNS
-
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
[m4_if([$1], [], [
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'], [])
])dnl /_LT_CONFIG_SAVE_COMMANDS
AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
[lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
+ if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
cat conftest.err >&AS_MESSAGE_LOG_FD
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
[lt_cv_ld_exported_symbols_list=yes],
[lt_cv_ld_exported_symbols_list=no])
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
])
AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&AS_MESSAGE_LOG_FD
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
])
case $host_os in
rhapsody* | darwin1.[[012]])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[[012]]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]][[,.]]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ if test yes = "$lt_cv_ld_force_load"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
[FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=''
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
+ if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
m4_if([$1], [CXX],
-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+[ if test yes != "$lt_cv_apple_cc_single_mod"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
fi
],[])
else
# Allow to override them for all tags through lt_cv_aix_libpath.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
+if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi],[])
if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
- _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
fi
])
aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
# -----------------------
# Find how we can fake an echo command that does not interpret backslash.
# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
+# of the generated configure script that will find a shell with a builtin
+# printf (that we can use as an echo command).
m4_defun([_LT_PROG_ECHO_BACKSLASH],
[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
- $ECHO "$*"
+ $ECHO "$*"
}
-case "$ECHO" in
+case $ECHO in
printf*) AC_MSG_RESULT([printf]) ;;
print*) AC_MSG_RESULT([print -r]) ;;
*) AC_MSG_RESULT([cat]) ;;
AC_DEFUN([_LT_WITH_SYSROOT],
[AC_MSG_CHECKING([for sysroot])
AC_ARG_WITH([sysroot],
-[ --with-sysroot[=DIR] Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).],
+[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
+ [Search for dependent libraries within DIR (or the compiler's sysroot
+ if not specified).])],
[], [with_sysroot=no])
dnl lt_sysroot will always be passed unquoted. We quote it here
dnl in case the user passed a directory name.
lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
yes)
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
no|'')
;; #(
*)
- AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_RESULT([$with_sysroot])
AC_MSG_ERROR([The sysroot must be an absolute path.])
;;
esac
AC_MSG_RESULT([${lt_sysroot:-no}])
_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-[dependent libraries, and in which our libraries should be installed.])])
+[dependent libraries, and where our libraries should be installed.])])
# _LT_ENABLE_LOCK
# ---------------
[AC_ARG_ENABLE([libtool-lock],
[AS_HELP_STRING([--disable-libtool-lock],
[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
- HPUX_IA64_MODE="32"
+ HPUX_IA64_MODE=32
;;
*ELF-64*)
- HPUX_IA64_MODE="64"
+ HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
rm -rf conftest*
;;
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
;;
esac
;;
- powerpc64le-*)
+ powerpc64le-*linux*)
LD="${LD-ld} -m elf32lppclinux"
;;
- powerpc64-*)
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- powerpcle-*)
+ powerpcle-*linux*)
LD="${LD-ld} -m elf64lppc"
;;
- powerpc-*)
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
+ SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_LANG_PUSH(C)
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+ CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
- i?86-*-solaris*)
+ i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
+ LD=${LD-ld}_sol2
fi
;;
*)
;;
esac
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
])# _LT_ENABLE_LOCK
[echo conftest.$ac_objext > conftest.lst
lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -eq 0; then
+ if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -ne 0; then
+ if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
])
])
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
if test -n "$RANLIB"; then
case $host_os in
- openbsd*)
+ bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
[$2=no
m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
+ lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
$RM conftest*
])
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
m4_if([$5], , :, [$5])
else
m4_if([$6], , :, [$6])
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $3"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
])
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
m4_if([$4], , :, [$4])
else
m4_if([$5], , :, [$5])
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
- teststring="ABCD"
+ teststring=ABCD
case $build_os in
msdosdjgpp*)
lt_cv_sys_max_cmd_len=8192;
;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
if test -n "$lt_cv_sys_max_cmd_len" && \
- test undefined != "$lt_cv_sys_max_cmd_len"; then
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
+ for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
+ test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
;;
esac
])
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
else
AC_MSG_RESULT(none)
# ----------------------------------------------------------------
m4_defun([_LT_TRY_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
+if test yes = "$cross_compiling"; then :
[$4]
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
return status;
}]
_LT_EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
lt_status=$?
case x$lt_status in
# ------------------
AC_DEFUN([LT_SYS_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
+if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
case $host_os in
beos*)
- lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
- # if libdl is installed we need to link against it
+ # if libdl is installed we need to link against it
AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
+ lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
])
;;
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
*)
AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
+ [lt_cv_dlopen=shl_load],
[AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
[AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
+ [lt_cv_dlopen=dlopen],
[AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
[AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
[AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
])
])
])
;;
esac
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
+ if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
+ else
+ enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- save_LIBS="$LIBS"
+ save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
AC_CACHE_CHECK([whether a program can dlopen itself],
lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
])
- if test "x$lt_cv_dlopen_self" = xyes; then
+ if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
lt_cv_dlopen_self_static, [dnl
])
fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
;;
esac
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_COMPILER_C_O([$1])
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
AC_MSG_CHECKING([if we can lock with hard links])
hard_links=yes
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ if test no = "$hard_links"; then
+ AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
need_locks=warn
fi
else
_LT_DECL([], [objdir], [0],
[The name of the directory that contains temporary libtool files])dnl
m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
- [Define to the sub-directory in which libtool stores uninstalled libraries.])
+AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
+ [Define to the sub-directory where libtool stores uninstalled libraries.])
])# _LT_CHECK_OBJDIR
_LT_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
test -n "$_LT_TAGVAR(runpath_var, $1)" ||
- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+ test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
# We can hardcode non-existent directories.
- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
+ test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
# Linking always hardcodes the temporary library directory.
_LT_TAGVAR(hardcode_action, $1)=relink
else
fi
AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
+ test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
- if test -n "$STRIP" ; then
+ if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
AC_MSG_RESULT([yes])
])# _LT_CMD_STRIPLIB
+# _LT_PREPARE_MUNGE_PATH_LIST
+# ---------------------------
+# Make sure func_munge_path_list() is defined correctly.
+m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
+[[# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x@S|@2 in
+ x)
+ ;;
+ *:)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
+ ;;
+ x:*)
+ eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
+ ;;
+ *)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+]])# _LT_PREPARE_PATH_LIST
+
+
# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_if([$1],
[], [
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
+ # and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
+ lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
# flags to be left without arguments
need_version=unknown
+AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
+[User-defined run-time library search path.])
+
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[[4-9]]*)
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[[01]] | aix4.[[01]].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a[(]lib.so.V[)]'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi[[45]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
m4_if([$1], [],[
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
*,cl*)
# Native MSVC
libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
- sys_lib_search_path_spec="$LIB"
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
*)
# Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
dynamic_linker=no
;;
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ ;;
+
# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
# before this can be enabled.
hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
else
- shlibpath_overrides_runpath=yes
+ need_version=yes
fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
;;
esac
AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
_LT_DECL([], [variables_saved_for_relink], [1],
[Variables whose values should be saved in libtool wrapper scripts and
restored at link time])
[Whether we should hardcode library paths into libraries])
_LT_DECL([], [sys_lib_search_path_spec], [2],
[Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
- [Run-time system search path for libraries])
+_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
+ [Detected run-time system search path for libraries])
+_LT_DECL([], [configure_time_lt_sys_library_path], [2],
+ [Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
])# _LT_SYS_DYNAMIC_LINKER
# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
-# find a file program which can recognize shared library
+# find a file program that can recognize shared library
AC_DEFUN([_LT_PATH_TOOL_PREFIX],
[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
ac_dummy="m4_if([$2], , $PATH, [$2])"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -f "$ac_dir/$1"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
AC_MSG_RESULT($MAGIC_CMD)
else
# _LT_PATH_MAGIC
# --------------
-# find a file program which can recognize a shared library
+# find a file program that can recognize a shared library
m4_defun([_LT_PATH_MAGIC],
[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
AC_ARG_WITH([gnu-ld],
[AS_HELP_STRING([--with-gnu-ld],
[assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
+ [test no = "$withval" || with_gnu_ld=yes],
[with_gnu_ld=no])dnl
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by $CC])
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
+ test no != "$with_gnu_ld" && break
;;
*)
- test "$with_gnu_ld" != yes && break
+ test yes != "$with_gnu_ld" && break
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
fi])
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
reload_cmds=false
fi
;;
darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
])# _LT_CMD_RELOAD
+# _LT_PATH_DD
+# -----------
+# find a working dd
+m4_defun([_LT_PATH_DD],
+[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
+[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi])
+rm -f conftest.i conftest2.i conftest.out])
+])# _LT_PATH_DD
+
+
+# _LT_CMD_TRUNCATE
+# ----------------
+# find command to truncate a binary pipe
+m4_defun([_LT_CMD_TRUNCATE],
+[m4_require([_LT_PATH_DD])
+AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
+_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
+ [Command to truncate a binary pipe])
+])# _LT_CMD_TRUNCATE
+
+
# _LT_CHECK_MAGIC_METHOD
# ----------------------
# how to check for library dependencies
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[[4-9]]*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
lt_cv_deplibs_check_method=pass_all
;;
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
])
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ lt_cv_path_NM=$NM
else
- lt_nm_to_check="${ac_tool_prefix}nm"
+ lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
- break
+ break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
- break
+ break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi])
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
# Let the user override the test.
else
AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
*COFF*)
- DUMPBIN="$DUMPBIN -symbols"
+ DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
esac
fi
AC_SUBST([DUMPBIN])
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
;;
*)
# fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
])
lt_cv_path_mainfest_tool=yes
fi
rm -f conftest*])
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
])# _LT_PATH_MANIFEST_TOOL
+# _LT_DLL_DEF_P([FILE])
+# ---------------------
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with func_dll_def_p in the libtool script
+AC_DEFUN([_LT_DLL_DEF_P],
+[dnl
+ test DEF = "`$SED -n dnl
+ -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace
+ -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments
+ -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl
+ -e q dnl Only consider the first "real" line
+ $1`" dnl
+])# _LT_DLL_DEF_P
+
+
# LT_LIB_M
# --------
# check for math library
# These system don't have libm, or don't need it
;;
*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
;;
*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
+ AC_CHECK_LIB(m, cos, LIBM=-lm)
;;
esac
AC_SUBST([LIBM])
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
symcode='[[ABCDGISTW]]'
;;
hpux*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
symcode='[[ABCDEGRST]]'
fi
;;
symcode='[[ABCDGIRSTW]]' ;;
esac
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK ['"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx]"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT@&t@_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT@&t@_DLSYM_CONST
#else
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
+ LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
+ if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
[Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
[Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
+ [Transform the output of nm into a list of symbols to manually relocate])
_LT_DECL([global_symbol_to_c_name_address],
[lt_cv_sys_global_symbol_to_c_name_address], [1],
[Transform the output of nm in a C name address pair])
_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
[lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
[Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
+ [The name lister interface])
_LT_DECL([], [nm_file_list_spec], [1],
[Specify filename containing input files for $NM])
]) # _LT_CMD_GLOBAL_SYMBOLS
m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
case $host_os in
aix[[4-9]]*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+ if test ia64 != "$host_cpu"; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
aCC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
ecpc* )
- # old Intel C++ for x86_64 which still supported -KPIC.
+ # old Intel C++ for x86_64, which still supported -KPIC.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
fi
],
[
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
case $host_os in
aix*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
fi
;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
hpux9* | hpux10* | hpux11*)
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
+ # old Intel for x86_64, which still supported -KPIC.
ecc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
fi
])
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
case $host_os in
aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global defined
- # symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
- _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
;;
cygwin* | mingw* | cegcc*)
case $cc_basename in
# included in the symbol list
_LT_TAGVAR(include_expsyms, $1)=
# exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
- openbsd*)
+ openbsd* | bitrig*)
with_gnu_ld=no
;;
linux* | k*bsd*-gnu | gnu*)
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
esac
fi
- if test "$lt_use_gnu_ld_interface" = yes; then
+ if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+ wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
supports_anon_versioning=no
- case `$LD -v 2>&1` in
+ case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
case $host_os in
aix[[3-9]]*)
# On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
+ if test ia64 != "$host_cpu"; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
_LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
+ if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
+ && test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
lf95*) # Lahey Fortran 8.1
_LT_TAGVAR(whole_archive_flag_spec, $1)=
tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
+ tcc*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
+ ;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
_LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
runpath_var=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
_LT_TAGVAR(hardcode_direct, $1)=unsupported
;;
aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
;;
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
fi
- _LT_TAGVAR(link_all_deplibs, $1)=no
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
_LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# Assume MSVC wrapper
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
;;
hpux9*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
m4_if($1, [], [
# (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
_LT_LINKER_OPTION([if $CC understands -b],
_LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
[_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
;;
esac
fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
;;
irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
# This should be the same for all languages, so no per-tag cache variable.
AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
[lt_cv_irix_exported_symbol],
- [save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ [save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
AC_LINK_IFELSE(
[AC_LANG_SOURCE(
[AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
end]])])],
[lt_cv_irix_exported_symbol=yes],
[lt_cv_irix_exported_symbol=no])
- LDFLAGS="$save_LDFLAGS"])
- if test "$lt_cv_irix_exported_symbol" = yes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ LDFLAGS=$save_LDFLAGS])
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
+ _LT_TAGVAR(link_all_deplibs, $1)=no
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
newsos6)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*nto* | *qnx*)
;;
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
fi
else
_LT_TAGVAR(ld_shlibs, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
osf3*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
solaris*)
_LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
fi
;;
sunos4*)
- if test "x$host_vendor" = xsequent; then
+ if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
;;
esac
- if test x$host_vendor = xsni; then
+ if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
;;
esac
fi
fi
])
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
# Assume -lc should be added
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $_LT_TAGVAR(archive_cmds, $1) in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
_LT_TAGDECL([], [hardcode_libdir_separator], [1],
[Whether we need a single "-rpath" flag with a separated argument])
_LT_TAGDECL([], [hardcode_direct], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary])
_LT_TAGDECL([], [hardcode_direct_absolute], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary and the resulting library dependency is
- "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ "absolute", i.e impossible to change by setting $shlibpath_var if the
library is relocated])
_LT_TAGDECL([], [hardcode_minus_L], [0],
[Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# ------------------------
# Ensure that the configuration variables for a C compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_C_CONFIG],
[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
+lt_save_CC=$CC
AC_LANG_PUSH(C)
# Source file extension for C test sources.
LT_SYS_DLOPEN_SELF
_LT_CMD_STRIPLIB
- # Report which library types will actually be built
+ # Report what library types will actually be built
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_CONFIG($1)
fi
AC_LANG_POP
-CC="$lt_save_CC"
+CC=$lt_save_CC
])# _LT_LANG_C_CONFIG
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
+if test -n "$CXX" && ( test no != "$CXX" &&
+ ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+ (test g++ != "$CXX"))); then
AC_PROG_CXXCPP
else
_lt_caught_CXX_error=yes
# the CXX compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
+if test yes != "$_lt_caught_CXX_error"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
if test -n "$compiler"; then
# We don't want -fno-exception when compiling C++ code, so set the
# no_builtin_flag separately
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
else
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
fi
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
# Set up default GNU C++ configuration
LT_PATH_LD
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ if test yes = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# If archive_cmds runs LD, not CC, wlarc should be empty
# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
# investigate it a little bit more. (MM)
- wlarc='${wl}'
+ wlarc='$wl'
# ancient GNU ld didn't support --whole-archive et. al.
if eval "`$CC -print-prog-name=ld` --help 2>&1" |
$GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
case $ld_flag in
;;
esac
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
fi
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag=$shared_flag' $wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to
# export.
_LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # The "-G" linker flag allows undefined symbols.
+ _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
# Determine the default libpath from the value encoded in an empty
# executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared
- # libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared
+ # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- func_to_tool_file "$lt_outputfile"~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# g++
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
_LT_DARWIN_LINKER_FEATURES($1)
;;
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
dgux*)
case $cc_basename in
ec++*)
;;
haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
hpux9*)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GXX"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
;;
*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
esac
fi
aCC*)
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
# Commands to make compiler produce verbose output that lists
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
irix5* | irix6*)
case $cc_basename in
CC*)
# SGI C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
_LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
;;
*)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
;;
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
# earlier do not add the objects themselves.
case `$CC -V 2>&1` in
*"Version 7."*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 8.0 or newer
tmp_idyn=
case $host_cpu in
ia64*) tmp_idyn=' -i_dynamic';;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
*pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
_LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
- $RANLIB $oldlib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
_LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 6 and above use weak symbols
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
;;
cxx*)
# Compaq C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
runpath_var=LD_RUN_PATH
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
;;
*)
*Sun\ C*)
# Sun C++ 5.9
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
# Not sure whether something based on
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
fi
output_verbose_link_cmd=func_echo_all
else
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Archives containing C++ object files must be created using
cxx*)
case $host in
osf3*)
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
;;
*)
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
- $RM $lib.exp'
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+ $RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
;;
esac
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
case $host in
osf3*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
+ # but understands '-z linker_flag'.
# Supported since Solaris 2.6 (maybe 2.5.1?)
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
;;
;;
gcx*)
# Green Hills C++ Compiler
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
# The C++ compiler must be used to create the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
;;
*)
# GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # g++ 2.7 appears to require '-G' NOT '-shared' on this
# platform.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
;;
esac
fi
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
- '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
_LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
- '"$_LT_TAGVAR(reload_cmds, $1)"
+ '"$_LT_TAGVAR(reload_cmds, $1)"
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
esac
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+ test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
- _LT_TAGVAR(GCC, $1)="$GXX"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$GXX
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+fi # test yes != "$_lt_caught_CXX_error"
AC_LANG_POP
])# _LT_LANG_CXX_CONFIG
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
func_stripname_cnf ()
{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ case @S|@2 in
+ .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
+ *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
esac
} # func_stripname_cnf
])# _LT_FUNC_STRIPNAME_CNF
+
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
- case ${prev}${p} in
+ case $prev$p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
- if test $p = "-L" ||
- test $p = "-R"; then
+ if test x-L = "$p" ||
+ test x-R = "$p"; then
prev=$p
continue
fi
case $p in
=*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
esac
- if test "$pre_test_object_deps_done" = no; then
- case ${prev} in
+ if test no = "$pre_test_object_deps_done"; then
+ case $prev in
-L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
else
- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
fi
;;
# The "-l" case would never come before the object being
esac
else
if test -z "$_LT_TAGVAR(postdeps, $1)"; then
- _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ _LT_TAGVAR(postdeps, $1)=$prev$p
else
- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
fi
fi
prev=
continue
fi
- if test "$pre_test_object_deps_done" = no; then
+ if test no = "$pre_test_object_deps_done"; then
if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
- _LT_TAGVAR(predep_objects, $1)="$p"
+ _LT_TAGVAR(predep_objects, $1)=$p
else
_LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
fi
else
if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
- _LT_TAGVAR(postdep_objects, $1)="$p"
+ _LT_TAGVAR(postdep_objects, $1)=$p
else
_LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
fi
_LT_TAGVAR(postdep_objects,$1)=
_LT_TAGVAR(postdeps,$1)=
;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
-
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC* | sunCC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
esac
])
esac
_LT_TAGVAR(compiler_lib_search_dirs, $1)=
if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
fi
_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
[The directories searched by this compiler when creating a shared library])
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
[AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
+if test -z "$F77" || test no = "$F77"; then
_lt_disable_F77=yes
fi
# the F77 compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
+if test yes != "$_lt_disable_F77"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
+ lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${F77-"f77"}
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$G77"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$G77
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
fi # test -n "$compiler"
GCC=$lt_save_GCC
- CC="$lt_save_CC"
- CFLAGS="$lt_save_CFLAGS"
-fi # test "$_lt_disable_F77" != yes
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_F77"
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
[AC_LANG_PUSH(Fortran)
-if test -z "$FC" || test "X$FC" = "Xno"; then
+if test -z "$FC" || test no = "$FC"; then
_lt_disable_FC=yes
fi
# the FC compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
+if test yes != "$_lt_disable_FC"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
+ lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${FC-"f95"}
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
-fi # test "$_lt_disable_FC" != yes
+fi # test yes != "$_lt_disable_FC"
AC_LANG_POP
])# _LT_LANG_FC_CONFIG
# --------------------------
# Ensure that the configuration variables for the GNU Java Compiler compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GCJ_CONFIG],
[AC_REQUIRE([LT_PROG_GCJ])dnl
AC_LANG_SAVE
CFLAGS=$GCJFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# GCJ did not exist at the time GCC didn't implicitly link libc in.
# --------------------------
# Ensure that the configuration variables for the GNU Go compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GO_CONFIG],
[AC_REQUIRE([LT_PROG_GO])dnl
AC_LANG_SAVE
CFLAGS=$GOFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# Go did not exist at the time GCC didn't implicitly link libc in.
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_RC_CONFIG],
[AC_REQUIRE([LT_PROG_RC])dnl
AC_LANG_SAVE
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
+lt_simple_link_test_code=$lt_simple_compile_test_code
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=
[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
[m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
[AC_CHECK_TOOL(GCJ, gcj,)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
AC_SUBST(GCJFLAGS)])])[]dnl
])
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
+ test ! -f "$lt_ac_sed" && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
cmp -s conftest.out conftest.nl || break
# 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
+ test 10 -lt "$lt_ac_count" && break
lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
+ if test "$lt_ac_count" -gt "$lt_ac_max"; then
lt_ac_max=$lt_ac_count
lt_cv_path_SED=$lt_ac_sed
fi
# Find out whether the shell is Bourne or XSI compatible,
# or has some other useful features.
m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
lt_unset=false
])# _LT_CHECK_SHELL_FEATURES
-# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-# ------------------------------------------------------
-# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-m4_defun([_LT_PROG_FUNCTION_REPLACE],
-[dnl {
-sed -e '/^$1 ()$/,/^} # $1 /c\
-$1 ()\
-{\
-m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
-} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-])
-
-
-# _LT_PROG_REPLACE_SHELLFNS
-# -------------------------
-# Replace existing portable implementations of several shell functions with
-# equivalent extended shell implementations where those features are available..
-m4_defun([_LT_PROG_REPLACE_SHELLFNS],
-[if test x"$xsi_shell" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
- func_split_long_opt_name=${1%%=*}
- func_split_long_opt_arg=${1#*=}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
- func_split_short_opt_arg=${1#??}
- func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
-
- _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
-
- _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
-fi
-
-if test x"$lt_shell_append" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
- func_quote_for_eval "${2}"
-dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
- eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
-fi
-])
-
# _LT_PATH_CONVERSION_FUNCTIONS
# -----------------------------
-# Determine which file name conversion functions should be used by
+# Determine what file name conversion functions should be used by
# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
# for certain cross-compile configurations and native mingw.
m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
# Helper functions for option handling. -*- Autoconf -*-
#
-# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 7 ltoptions.m4
+# serial 8 ltoptions.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
_LT_MANGLE_DEFUN([$1], [$2]),
- [m4_warning([Unknown $1 option `$2'])])[]dnl
+ [m4_warning([Unknown $1 option '$2'])])[]dnl
])
dnl
dnl If no reference was made to various pairs of opposing options, then
dnl we run the default mode handler for the pair. For example, if neither
- dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
dnl archives by default:
_LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
_LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
_LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
_LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
- [_LT_ENABLE_FAST_INSTALL])
+ [_LT_ENABLE_FAST_INSTALL])
+ _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
+ [_LT_WITH_AIX_SONAME([aix])])
])
])# _LT_SET_OPTIONS
[_LT_SET_OPTION([LT_INIT], [dlopen])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
+put the 'dlopen' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
_LT_SET_OPTION([LT_INIT], [win32-dll])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
+put the 'win32-dll' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
# _LT_ENABLE_SHARED([DEFAULT])
# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-shared flag, and supports the 'shared' and
+# 'disable-shared' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_SHARED],
[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([shared],
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
# _LT_ENABLE_STATIC([DEFAULT])
# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-static flag, and support the 'static' and
+# 'disable-static' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_STATIC],
[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([static],
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_static=]_LT_ENABLE_STATIC_DEFAULT)
# _LT_ENABLE_FAST_INSTALL([DEFAULT])
# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-fast-install flag, and support the 'fast-install'
+# and 'disable-fast-install' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_FAST_INSTALL],
[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([fast-install],
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
+the 'fast-install' option into LT_INIT's first parameter.])
])
AU_DEFUN([AC_DISABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
+the 'disable-fast-install' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+# _LT_WITH_AIX_SONAME([DEFAULT])
+# ----------------------------------
+# implement the --with-aix-soname flag, and support the `aix-soname=aix'
+# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
+# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'.
+m4_define([_LT_WITH_AIX_SONAME],
+[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
+shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[[5-9]]*,yes)
+ AC_MSG_CHECKING([which variant of shared library versioning to provide])
+ AC_ARG_WITH([aix-soname],
+ [AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
+ [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
+ [case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ AC_MSG_ERROR([Unknown argument to --with-aix-soname])
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname],
+ [AC_CACHE_VAL([lt_cv_with_aix_soname],
+ [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
+ with_aix_soname=$lt_cv_with_aix_soname])
+ AC_MSG_RESULT([$with_aix_soname])
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+_LT_DECL([], [shared_archive_member_spec], [0],
+ [Shared archive member basename, for filename based shared library versioning on AIX])dnl
+])# _LT_WITH_AIX_SONAME
+
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
+
+
# _LT_WITH_PIC([MODE])
# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
# LT_INIT options.
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'.
m4_define([_LT_WITH_PIC],
[AC_ARG_WITH([pic],
[AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
- [pic_mode=default])
-
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+ [pic_mode=m4_default([$1], [default])])
_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
])# _LT_WITH_PIC
[_LT_SET_OPTION([LT_INIT], [pic-only])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
+put the 'pic-only' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# ------------
# Manipulate m4 lists.
# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
+# Autoconf-2.59, which quotes differently.
m4_define([lt_car], [[$1]])
m4_define([lt_cdr],
[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
# lt_append(MACRO-NAME, STRING, [SEPARATOR])
# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
# Note that neither SEPARATOR nor STRING are expanded; they are appended
# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
# No SEPARATOR is output if MACRO-NAME was previously undefined (different
# ltversion.m4 -- version numbers -*- Autoconf -*-
#
-# Copyright (C) 2004 Free Software Foundation, Inc.
+# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc.
# Written by Scott James Remnant, 2004
#
# This file is free software; the Free Software Foundation gives
# @configure_input@
-# serial 3337 ltversion.m4
+# serial 4179 ltversion.m4
# This file is part of GNU Libtool
-m4_define([LT_PACKAGE_VERSION], [2.4.2])
-m4_define([LT_PACKAGE_REVISION], [1.3337])
+m4_define([LT_PACKAGE_VERSION], [2.4.6])
+m4_define([LT_PACKAGE_REVISION], [2.4.6])
AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4.2'
-macro_revision='1.3337'
+[macro_version='2.4.6'
+macro_revision='2.4.6'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])
# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Scott James Remnant, 2004.
#
# This file is free software; the Free Software Foundation gives
# These exist entirely to fool aclocal when bootstrapping libtool.
#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
# which have later been changed to m4_define as they aren't part of the
# exported API, or moved to Autoconf or Automake where they belong.
#
# included after everything else. This provides aclocal with the
# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
#
# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
# Yes, that means every name once taken will need to remain here until
## Process this file with automake to produce Makefile.in
-SUBDIRS = gobject bugs annotations fail empty program .
+# we need to run '.' last so that sanity processes the generated docs
+# maybe move it to a subdir?
+SUBDIRS = annotations bugs empty fail gobject program repro .
if BUILD_TESTS
PATH=$(abs_top_builddir):$(srcdir):$(PATH) \
PYTHONPATH=$(abs_top_builddir):$(abs_top_srcdir):$(PYTHONPATH) \
GLIB_PREFIX="$(glib_prefix)"
-
+TEST_EXTENSIONS = .py
+PY_LOG_COMPILER = $(PYTHON)
endif
EXTRA_DIST = gtkdoctest.sh $(TESTS)
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = tests
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(srcdir)/tools.sh.in $(top_srcdir)/build-aux/test-driver
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES = tools.sh
CONFIG_CLEAN_VPATH_FILES =
bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
-TEST_EXTENSIONS = @EXEEXT@ .test
LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.test.log=.log)
-TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver
-TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
- $(TEST_LOG_FLAGS)
+TEST_LOGS = $(am__test_logs2:.py.log=.log)
+PY_LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver
+PY_LOG_COMPILE = $(PY_LOG_COMPILER) $(AM_PY_LOG_FLAGS) $(PY_LOG_FLAGS)
DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/tools.sh.in \
+ $(top_srcdir)/build-aux/test-driver
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-SUBDIRS = gobject bugs annotations fail empty program .
+
+# we need to run '.' last so that sanity processes the generated docs
+# maybe move it to a subdir?
+SUBDIRS = annotations bugs empty fail gobject program repro .
@BUILD_TESTS_TRUE@TESTS = \
@BUILD_TESTS_TRUE@ check.py common.py mk_to_db.py \
@BUILD_TESTS_TRUE@ tools.sh gobject.sh bugs.sh annotations.sh fail.sh empty.sh sanity.sh \
@BUILD_TESTS_TRUE@ PYTHONPATH=$(abs_top_builddir):$(abs_top_srcdir):$(PYTHONPATH) \
@BUILD_TESTS_TRUE@ GLIB_PREFIX="$(glib_prefix)"
+@BUILD_TESTS_TRUE@TEST_EXTENSIONS = .py
+@BUILD_TESTS_TRUE@PY_LOG_COMPILER = $(PYTHON)
EXTRA_DIST = gtkdoctest.sh $(TESTS)
all: all-recursive
.SUFFIXES:
-.SUFFIXES: .log .test .test$(EXEEXT) .trs
+.SUFFIXES: .log .py .py$(EXEEXT) .trs
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
if test -n "$$am__remaking_logs"; then \
echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
"recursion detected" >&2; \
- else \
+ elif test -n "$$redo_logs"; then \
am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
fi; \
if $(am__make_dryrun); then :; else \
am__force_recheck=am--force-recheck \
TEST_LOGS="$$log_list"; \
exit $$?
-check.py.log: check.py
- @p='check.py'; \
- b='check.py'; \
- $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
- --log-file $$b.log --trs-file $$b.trs \
- $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
- "$$tst" $(AM_TESTS_FD_REDIRECT)
-common.py.log: common.py
- @p='common.py'; \
- b='common.py'; \
- $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
- --log-file $$b.log --trs-file $$b.trs \
- $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
- "$$tst" $(AM_TESTS_FD_REDIRECT)
-mk_to_db.py.log: mk_to_db.py
- @p='mk_to_db.py'; \
- b='mk_to_db.py'; \
- $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
- --log-file $$b.log --trs-file $$b.trs \
- $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
- "$$tst" $(AM_TESTS_FD_REDIRECT)
tools.sh.log: tools.sh
@p='tools.sh'; \
b='tools.sh'; \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
-.test.log:
+.py.log:
@p='$<'; \
$(am__set_b); \
- $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+ $(am__check_pre) $(PY_LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
- $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+ $(am__common_driver_flags) $(AM_PY_LOG_DRIVER_FLAGS) $(PY_LOG_DRIVER_FLAGS) -- $(PY_LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@.py$(EXEEXT).log:
@am__EXEEXT_TRUE@ @p='$<'; \
@am__EXEEXT_TRUE@ $(am__set_b); \
-@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@ $(am__check_pre) $(PY_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_PY_LOG_DRIVER_FLAGS) $(PY_LOG_DRIVER_FLAGS) -- $(PY_LOG_COMPILE) \
@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT)
distdir: $(DISTFILES)
mostlyclean-libtool pdf pdf-am ps ps-am recheck tags tags-am \
uninstall uninstall-am
+.PRECIOUS: Makefile
+
# run any given test by running make <test>.check
%.check: %
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = tests/annotations
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/annotations/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/annotations/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am
+.PRECIOUS: Makefile
+
@BUILD_TESTS_TRUE@check-local: clean
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Everything below here is generic #
####################################
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/tests/gtk-doc.make $(srcdir)/Makefile.in \
- $(srcdir)/Makefile.am
subdir = tests/annotations/docs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/tests/gtk-doc.make
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/annotations/docs/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/annotations/docs/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
-$(top_srcdir)/tests/gtk-doc.make:
+$(top_srcdir)/tests/gtk-doc.make $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
check-local: html-build.stamp pdf-build.stamp
@ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
sgml.stamp: sgml-build.stamp
@true
+$(DOC_MAIN_SGML_FILE): sgml-build.stamp
+ @true
+
xml/gtkdocentities.ent: Makefile
@$(MKDIR_P) $(@D) && ( \
echo "<!ENTITY package \"$(PACKAGE)\">"; \
</releaseinfo>
</bookinfo>
- <reference label="II">
+ <reference label="2">
<title>API Reference</title>
<chapter id="main-api">
<title>Tests</title>
</chapter>
</reference>
- <part label="III">
+ <part label="3">
<title>Appendix</title>
<index id="api-index">
annotation_outparams_nullable
annotation_outparams_not_nullable
annotation_outparams_optional
+annotation_outparams_not_optional
annotation_outparams_optional_nullable
+annotation_outparams_not_optional_nullable
annotation_outparams_optional_not_nullable
+annotation_outparams_not_optional_not_nullable
annotation_skip
annotation_skip_return
annotation_scope
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = tests/annotations/src
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/build-aux/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/build-aux/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/annotations/src/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/annotations/src/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
-include $(top_srcdir)/git.mk
}
/**
+ * annotation_outparams_not_optional:
+ * @list: (out) (transfer none) (not optional): a pointer to take a list
+ *
+ * Document optional parameters.
+ *
+ * Returns: %TRUE for success
+ */
+gboolean
+annotation_outparams_not_optional (GList **list)
+{
+ return TRUE;
+}
+
+/**
* annotation_outparams_nullable:
* @list: (out) (transfer none) (nullable): a pointer to take a list; but %NULL
* may also be returned
}
/**
+ * annotation_outparams_not_optional_nullable:
+ * @list: (out) (transfer none) (not optional) (nullable): a pointer to take a
+ * list, not %NULL; but %NULL may also be returned in @list — isn’t that cool?
+ *
+ * Document non-optional parameters.
+ *
+ * Returns: %TRUE for success
+ */
+gboolean
+annotation_outparams_not_optional_nullable (GList **list)
+{
+ return TRUE;
+}
+
+/**
* annotation_outparams_optional_not_nullable:
* @list: (out) (transfer none) (optional) (not nullable): a pointer to take a
* list, not %NULL; and %NULL must not be returned in @list — isn’t that cool?
}
/**
+ * annotation_outparams_not_optional_not_nullable:
+ * @list: (out) (transfer none) (not optional) (not nullable): a pointer to take a
+ * list, not %NULL; and %NULL must not be returned in @list — isn’t that cool?
+ *
+ * Document non-optional parameters.
+ *
+ * Returns: %TRUE for success
+ */
+gboolean
+annotation_outparams_not_optional_not_nullable (GList **list)
+{
+ return TRUE;
+}
+
+/**
* annotation_skip: (skip)
* @list: a pointer to take a list
*
gboolean annotation_outparams (GList **list);
gboolean annotation_outparams_optional (GList **list);
+gboolean annotation_outparams_not_optional (GList **list);
gboolean annotation_outparams_nullable (GList **list);
gboolean annotation_outparams_not_nullable (GList **list);
gboolean annotation_outparams_optional_nullable (GList **list);
+gboolean annotation_outparams_not_optional_nullable (GList **list);
gboolean annotation_outparams_optional_not_nullable (GList **list);
+gboolean annotation_outparams_not_optional_not_nullable (GList **list);
void annotation_skip (GList *list);
gboolean annotation_skip_return (GList *list);
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = tests/bugs
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/bugs/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/bugs/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am
+.PRECIOUS: Makefile
+
@BUILD_TESTS_TRUE@check-local: clean
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Everything below here is generic #
####################################
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/tests/gtk-doc.make $(srcdir)/Makefile.in \
- $(srcdir)/Makefile.am
subdir = tests/bugs/docs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/tests/gtk-doc.make
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/bugs/docs/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/bugs/docs/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
-$(top_srcdir)/tests/gtk-doc.make:
+$(top_srcdir)/tests/gtk-doc.make $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
check-local: html-build.stamp pdf-build.stamp
@ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
sgml.stamp: sgml-build.stamp
@true
+$(DOC_MAIN_SGML_FILE): sgml-build.stamp
+ @true
+
xml/gtkdocentities.ent: Makefile
@$(MKDIR_P) $(@D) && ( \
echo "<!ENTITY package \"$(PACKAGE)\">"; \
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = tests/bugs/src
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/build-aux/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/build-aux/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/bugs/src/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/bugs/src/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
-include $(top_srcdir)/git.mk
* </refsect2>
*/
-#include <glib.h>
-
#include "tester.h"
/**
-#!/usr/bin/env python
# -*- python -*-
#
# gtk-doc - GTK DocBook documentation generator.
result = check.get_variable({}, ['foo = bar'], 'foo')
self.assertEqual('bar', result)
+ def test_get_variable_empty_file(self):
+ with self.assertRaises(check.FileFormatError) as ctx:
+ check.get_variable({'foo': 'bar'}, [], 'foo')
+ self.assertEqual(str(ctx.exception), 'foo')
+
if __name__ == '__main__':
unittest.main()
-#!/usr/bin/env python
-#!/usr/bin/env python
# -*- python -*-
#
# gtk-doc - GTK DocBook documentation generator.
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
-import mock
+try:
+ from unittest import mock
+except ImportError:
+ import mock
+
import unittest
+from six import PY2
from gtkdoc import common
+if PY2:
+ openname = '__builtin__.open'
+else:
+ openname = 'builtins.open'
+
+
class TestUpdateFileIfChanged(unittest.TestCase):
@mock.patch('os.path.exists')
self.assertTrue(res)
@mock.patch('os.path.exists')
- @mock.patch('__builtin__.open', mock.mock_open(read_data='bar'))
+ @mock.patch(openname, mock.mock_open(read_data='bar'))
@mock.patch('os.unlink')
def test_FilesAreTheSame(self, os_unlink, os_path_exists):
os_path_exists.return_value = True
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = tests/empty
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/empty/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/empty/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am
+.PRECIOUS: Makefile
+
@BUILD_TESTS_TRUE@check-local: clean
@BUILD_TESTS_TRUE@ @rm -f docs/tester-docs.xml
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Everything below here is generic #
####################################
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/tests/gtk-doc.make $(srcdir)/Makefile.in \
- $(srcdir)/Makefile.am
subdir = tests/empty/docs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/tests/gtk-doc.make
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/empty/docs/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/empty/docs/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
-$(top_srcdir)/tests/gtk-doc.make:
+$(top_srcdir)/tests/gtk-doc.make $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
check-local: html-build.stamp pdf-build.stamp
@ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
sgml.stamp: sgml-build.stamp
@true
+$(DOC_MAIN_SGML_FILE): sgml-build.stamp
+ @true
+
xml/gtkdocentities.ent: Makefile
@$(MKDIR_P) $(@D) && ( \
echo "<!ENTITY package \"$(PACKAGE)\">"; \
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = tests/empty/src
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/build-aux/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/build-aux/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/empty/src/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/empty/src/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
-include $(top_srcdir)/git.mk
* returns nothing.
*/
-#include <glib.h>
-
#include "tester.h"
/**
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = tests/fail
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/fail/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/fail/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am
+.PRECIOUS: Makefile
+
@BUILD_TESTS_TRUE@check-local: clean
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Everything below here is generic #
####################################
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/tests/gtk-doc.make $(srcdir)/Makefile.in \
- $(srcdir)/Makefile.am
subdir = tests/fail/docs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/tests/gtk-doc.make
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/fail/docs/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/fail/docs/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
-$(top_srcdir)/tests/gtk-doc.make:
+$(top_srcdir)/tests/gtk-doc.make $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
check-local: html-build.stamp pdf-build.stamp
@ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
sgml.stamp: sgml-build.stamp
@true
+$(DOC_MAIN_SGML_FILE): sgml-build.stamp
+ @true
+
xml/gtkdocentities.ent: Makefile
@$(MKDIR_P) $(@D) && ( \
echo "<!ENTITY package \"$(PACKAGE)\">"; \
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = tests/fail/src
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/build-aux/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/build-aux/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/fail/src/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/fail/src/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
-include $(top_srcdir)/git.mk
* This file contains non-sense code for the sole purpose of testing the docs.
*/
-#include <glib.h>
-
#include "tester.h"
/**
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = tests/gobject
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/gobject/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/gobject/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am
+.PRECIOUS: Makefile
+
@BUILD_TESTS_TRUE@check-local: clean
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Everything below here is generic #
####################################
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/tests/gtk-doc.make $(srcdir)/Makefile.in \
- $(srcdir)/Makefile.am
subdir = tests/gobject/docs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/tests/gtk-doc.make
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/gobject/docs/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/gobject/docs/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
-$(top_srcdir)/tests/gtk-doc.make:
+$(top_srcdir)/tests/gtk-doc.make $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
check-local: html-build.stamp pdf-build.stamp
@ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
sgml.stamp: sgml-build.stamp
@true
+$(DOC_MAIN_SGML_FILE): sgml-build.stamp
+ @true
+
xml/gtkdocentities.ent: Makefile
@$(MKDIR_P) $(@D) && ( \
echo "<!ENTITY package \"$(PACKAGE)\">"; \
</para>
</preface>
- <part label="I" id="part.i">
+ <part label="1" id="part.i">
<title>Overview</title>
<chapter id="Overview-building">
<title>How to build the library</title>
</chapter>
</part>
- <reference label="II" id="part.ii">
+ <reference label="2" id="part.ii">
<title>API Reference</title>
<chapter id="main-api">
<title>Tests</title>
</chapter>
</reference>
- <part label="III" id="part.iii">
+ <part label="3" id="part.iii">
<title>Appendix</title>
<chapter id="object-tree">
libtester_la_SOURCES = \
gobject.c gobject.h \
giface.c giface.h \
- gtypes.c gtypes.h \
- tester.h
+ gtypes.c gtypes.h
#libtester_la_LIBADD = $(TEST_DEPS_LIBS)
AM_CPPFLAGS = $(TEST_DEPS_CFLAGS)
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = tests/gobject/src
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/build-aux/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
LTLIBRARIES = $(noinst_LTLIBRARIES)
libtester_la_LIBADD =
am__libtester_la_SOURCES_DIST = gobject.c gobject.h giface.c giface.h \
- gtypes.c gtypes.h tester.h
+ gtypes.c gtypes.h
@BUILD_TESTS_TRUE@am_libtester_la_OBJECTS = gobject.lo giface.lo \
@BUILD_TESTS_TRUE@ gtypes.lo
libtester_la_OBJECTS = $(am_libtester_la_OBJECTS)
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/build-aux/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
@BUILD_TESTS_TRUE@libtester_la_SOURCES = \
@BUILD_TESTS_TRUE@ gobject.c gobject.h \
@BUILD_TESTS_TRUE@ giface.c giface.h \
-@BUILD_TESTS_TRUE@ gtypes.c gtypes.h \
-@BUILD_TESTS_TRUE@ tester.h
+@BUILD_TESTS_TRUE@ gtypes.c gtypes.h
#libtester_la_LIBADD = $(TEST_DEPS_LIBS)
@BUILD_TESTS_TRUE@AM_CPPFLAGS = $(TEST_DEPS_CFLAGS)
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/gobject/src/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/gobject/src/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
-include $(top_srcdir)/git.mk
* This file contains non-sense code for the sole purpose of testing the docs.
*/
-#include <glib.h>
-#include <glib-object.h>
-
#include "giface.h"
/* constructor methods */
g_cclosure_marshal_VOID__OBJECT,
G_TYPE_NONE, // return type
0); // n_params
-
+
g_object_interface_install_property (g_class ,
g_param_spec_string ("itest",
"itest prop",
* This file contains non-sense code for the sole purpose of testing the docs.
*/
-#include <glib.h>
-#include <glib-object.h>
-
#include "gobject.h"
#include "giface.h"
* This file contains non-sense code for the sole purpose of testing the docs.
*/
-#include <glib.h>
-#include <glib-object.h>
-
#include "gtypes.h"
/* enum: class internals */
+++ /dev/null
-#ifndef GTKDOC_TESTER_H
-#define GTKDOC_TESTER_H
-
-#include "gobject.h"
-#include "giface.h"
-#include "gtypes.h"
-
-#endif // GTKDOC_TESTER_H
-
sgml.stamp: sgml-build.stamp
@true
+$(DOC_MAIN_SGML_FILE): sgml-build.stamp
+ @true
+
xml/gtkdocentities.ent: Makefile
@$(MKDIR_P) $(@D) && ( \
echo "<!ENTITY package \"$(PACKAGE)\">"; \
-#!/usr/bin/env python
# -*- python; coding: utf-8 -*-
#
# gtk-doc - GTK DocBook documentation generator.
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
build_triplet = @build@
host_triplet = @host@
subdir = tests/program
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/program/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/program/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am
+.PRECIOUS: Makefile
+
@BUILD_TESTS_TRUE@check-local: clean
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# Everything below here is generic #
####################################
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/tests/gtk-doc.make $(srcdir)/Makefile.in \
- $(srcdir)/Makefile.am
subdir = tests/program/docs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/tests/gtk-doc.make
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/program/docs/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/program/docs/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
-$(top_srcdir)/tests/gtk-doc.make:
+$(top_srcdir)/tests/gtk-doc.make $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
check-local: html-build.stamp pdf-build.stamp
@ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
sgml.stamp: sgml-build.stamp
@true
+$(DOC_MAIN_SGML_FILE): sgml-build.stamp
+ @true
+
xml/gtkdocentities.ent: Makefile
@$(MKDIR_P) $(@D) && ( \
echo "<!ENTITY package \"$(PACKAGE)\">"; \
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
host_triplet = @host@
@BUILD_TESTS_TRUE@noinst_PROGRAMS = test-program$(EXEEXT)
subdir = tests/program/src
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/build-aux/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
$(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/build-aux/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
STRIP = @STRIP@
TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
-TRACE = @TRACE@
TS_FMT = @TS_FMT@
VERSION = @VERSION@
XMLCATALOG = @XMLCATALOG@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/program/src/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu tests/program/src/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
-include $(top_srcdir)/git.mk
--- /dev/null
+## Process this file with automake to produce Makefile.in
+
+SUBDIRS = . src docs
+
+if BUILD_TESTS
+
+check-local: clean
+
+endif
+
+
+-include $(top_srcdir)/git.mk
--- /dev/null
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = tests/repro
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
+ $(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATE_FMT_CMD = @DATE_FMT_CMD@
+DBLATEX = @DBLATEX@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ELAPSED_FMT = @ELAPSED_FMT@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FOP = @FOP@
+GREP = @GREP@
+HELP_DIR = @HELP_DIR@
+HIGHLIGHT = @HIGHLIGHT@
+HIGHLIGHT_OPTIONS = @HIGHLIGHT_OPTIONS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ITSTOOL = @ITSTOOL@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_DATA_DIR = @PACKAGE_DATA_DIR@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PYTHON = @PYTHON@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_PACKAGE_DIR = @PYTHON_PACKAGE_DIR@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
+TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
+TS_FMT = @TS_FMT@
+VERSION = @VERSION@
+XMLCATALOG = @XMLCATALOG@
+XMLLINT = @XMLLINT@
+XML_CATALOG_FILE = @XML_CATALOG_FILE@
+XSLTPROC = @XSLTPROC@
+YELP_LC_DIST = @YELP_LC_DIST@
+YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+glib_prefix = @glib_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = . src docs
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/repro/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu tests/repro/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+@BUILD_TESTS_FALSE@check-local:
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) check-am install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+ check-am check-local clean clean-generic clean-libtool \
+ cscopelist-am ctags ctags-am distclean distclean-generic \
+ distclean-libtool distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+ uninstall-am
+
+.PRECIOUS: Makefile
+
+
+@BUILD_TESTS_TRUE@check-local: clean
+
+-include $(top_srcdir)/git.mk
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+## Process this file with automake to produce Makefile.in
+
+# We require automake 1.6 at least.
+AUTOMAKE_OPTIONS = 1.6
+
+# The name of the module, e.g. 'glib'.
+DOC_MODULE=tester
+
+# The top-level SGML file. You can change this if you want to.
+DOC_MAIN_SGML_FILE=$(DOC_MODULE)-docs.xml
+
+# The directory containing the source code. Relative to $(srcdir).
+# gtk-doc will search all .c & .h files beneath here for inline comments
+# documenting the functions and macros.
+DOC_SOURCE_DIR=$(top_srcdir)/tests/repro/src
+
+# Extra options to pass to gtkdoc-scangobj. Not normally needed.
+SCANGOBJ_OPTIONS=
+
+# Extra options to supply to gtkdoc-scan.
+SCAN_OPTIONS=--rebuild-sections --rebuild-types
+
+# Extra options to supply to gtkdoc-mkdb.
+MKDB_OPTIONS=--xml-mode
+
+# Extra options to supply to gtkdoc-mkhtml
+MKHTML_OPTIONS=
+
+# Extra options to supply to gtkdoc-fixref. Not normally needed.
+# --html-dir=$(HTML_DIR)
+FIXXREF_OPTIONS=--extra-dir=$(glib_prefix)/share/gtk-doc/html
+
+# Used for dependencies. The docs will be rebuilt if any of these change.
+HFILE_GLOB=$(top_srcdir)/tests/repro/src/*.h
+CFILE_GLOB=$(top_srcdir)/tests/repro/src/*.c
+
+# Header files to ignore when scanning.
+IGNORE_HFILES=config.h
+
+# Images to copy into HTML directory.
+HTML_IMAGES =
+
+# Extra SGML files that are included by $(DOC_MAIN_SGML_FILE).
+# e.g. content_files=running.sgml building.sgml changes-2.0.sgml
+content_files =
+
+# SGML files where gtk-doc abbrevations (#GtkWidget) are expanded
+# These files must be listed here *and* in content_files
+# e.g. expand_content_files=running.sgml
+expand_content_files=
+
+# CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library.
+# Only needed if you are using gtkdoc-scangobj to dynamically query widget
+# signals and properties.
+GTKDOC_CFLAGS = -I$(top_srcdir)/tests/repro/src $(TEST_DEPS_CFLAGS)
+GTKDOC_LIBS = $(TEST_DEPS_LIBS) $(top_builddir)/tests/repro/src/libtester.la
+
+# include generic part
+include $(top_srcdir)/tests/gtk-doc.make
+
+# Other files to distribute
+# e.g. EXTRA_DIST += version.xml.in
+EXTRA_DIST +=
+
+CLEANFILES += \
+ $(DOC_MODULE)-overrides.txt \
+ $(DOC_MODULE).types
+
+if BUILD_TESTS
+TESTS_ENVIRONMENT = \
+ DOC_MODULE=$(DOC_MODULE) DOC_MAIN_SGML_FILE=$(DOC_MAIN_SGML_FILE) \
+ PATH=$(abs_top_builddir):$(srcdir):$(PATH) \
+ PERL5LIB=$(abs_top_builddir):$(PERL5LIB)
+endif
+
+CLEANFILES += \
+ tester-sections.txt
+
+-include $(top_srcdir)/git.mk
--- /dev/null
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# -*- mode: makefile -*-
+
+####################################
+# Everything below here is generic #
+####################################
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = tests/repro/docs
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
+ $(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/tests/gtk-doc.make
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATE_FMT_CMD = @DATE_FMT_CMD@
+DBLATEX = @DBLATEX@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ELAPSED_FMT = @ELAPSED_FMT@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FOP = @FOP@
+GREP = @GREP@
+HELP_DIR = @HELP_DIR@
+HIGHLIGHT = @HIGHLIGHT@
+HIGHLIGHT_OPTIONS = @HIGHLIGHT_OPTIONS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ITSTOOL = @ITSTOOL@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_DATA_DIR = @PACKAGE_DATA_DIR@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PYTHON = @PYTHON@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_PACKAGE_DIR = @PYTHON_PACKAGE_DIR@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
+TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
+TS_FMT = @TS_FMT@
+VERSION = @VERSION@
+XMLCATALOG = @XMLCATALOG@
+XMLLINT = @XMLLINT@
+XML_CATALOG_FILE = @XML_CATALOG_FILE@
+XSLTPROC = @XSLTPROC@
+YELP_LC_DIST = @YELP_LC_DIST@
+YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+glib_prefix = @glib_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# We require automake 1.6 at least.
+AUTOMAKE_OPTIONS = 1.6
+
+# The name of the module, e.g. 'glib'.
+DOC_MODULE = tester
+
+# The top-level SGML file. You can change this if you want to.
+DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.xml
+
+# The directory containing the source code. Relative to $(srcdir).
+# gtk-doc will search all .c & .h files beneath here for inline comments
+# documenting the functions and macros.
+DOC_SOURCE_DIR = $(top_srcdir)/tests/repro/src
+
+# Extra options to pass to gtkdoc-scangobj. Not normally needed.
+SCANGOBJ_OPTIONS =
+
+# Extra options to supply to gtkdoc-scan.
+SCAN_OPTIONS = --rebuild-sections --rebuild-types
+
+# Extra options to supply to gtkdoc-mkdb.
+MKDB_OPTIONS = --xml-mode
+
+# Extra options to supply to gtkdoc-mkhtml
+MKHTML_OPTIONS =
+
+# Extra options to supply to gtkdoc-fixref. Not normally needed.
+# --html-dir=$(HTML_DIR)
+FIXXREF_OPTIONS = --extra-dir=$(glib_prefix)/share/gtk-doc/html
+
+# Used for dependencies. The docs will be rebuilt if any of these change.
+HFILE_GLOB = $(top_srcdir)/tests/repro/src/*.h
+CFILE_GLOB = $(top_srcdir)/tests/repro/src/*.c
+
+# Header files to ignore when scanning.
+IGNORE_HFILES = config.h
+
+# Images to copy into HTML directory.
+HTML_IMAGES =
+
+# Extra SGML files that are included by $(DOC_MAIN_SGML_FILE).
+# e.g. content_files=running.sgml building.sgml changes-2.0.sgml
+content_files =
+
+# SGML files where gtk-doc abbrevations (#GtkWidget) are expanded
+# These files must be listed here *and* in content_files
+# e.g. expand_content_files=running.sgml
+expand_content_files =
+
+# CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library.
+# Only needed if you are using gtkdoc-scangobj to dynamically query widget
+# signals and properties.
+GTKDOC_CFLAGS = -I$(top_srcdir)/tests/repro/src $(TEST_DEPS_CFLAGS)
+GTKDOC_LIBS = $(TEST_DEPS_LIBS) $(top_builddir)/tests/repro/src/libtester.la
+@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
+@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
+@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_RUN =
+@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_RUN = $(LIBTOOL) --mode=execute
+
+# We set GPATH here; this gives us semantics for GNU make
+# which are more like other make's VPATH, when it comes to
+# whether a source that is a target of one rule is then
+# searched for in VPATH/GPATH.
+#
+GPATH = $(srcdir)
+
+# we don't install anything in tests
+#TARGET_DIR=$(HTML_DIR)/$(DOC_MODULE)
+SETUP_FILES = \
+ $(content_files) \
+ $(DOC_MAIN_SGML_FILE) \
+ $(DOC_MODULE)-sections.txt \
+ $(DOC_MODULE)-overrides.txt
+
+
+# include generic part
+
+# Other files to distribute
+# e.g. EXTRA_DIST += version.xml.in
+EXTRA_DIST = $(HTML_IMAGES) $(SETUP_FILES)
+DOC_STAMPS = setup-build.stamp scan-build.stamp sgml-build.stamp \
+ html-build.stamp pdf-build.stamp \
+ sgml.stamp html.stamp pdf.stamp
+
+SCANOBJ_FILES = \
+ $(DOC_MODULE).args \
+ $(DOC_MODULE).hierarchy \
+ $(DOC_MODULE).interfaces \
+ $(DOC_MODULE).prerequisites \
+ $(DOC_MODULE).signals
+
+REPORT_FILES = \
+ $(DOC_MODULE)-undocumented.txt \
+ $(DOC_MODULE)-undeclared.txt \
+ $(DOC_MODULE)-unused.txt
+
+CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) \
+ $(DOC_MODULE).pdf ts gtkdoc-scan.log gtkdoc-scangobj.log \
+ gtkdoc-mkdb.log gtkdoc-mkhtml.log gtkdoc-mkpdf.log \
+ gtkdoc-fixxref.log $(DOC_MODULE)-overrides.txt \
+ $(DOC_MODULE).types tester-sections.txt
+GITIGNOREFILES = \
+ html.ref xml.ref
+
+@BUILD_TESTS_TRUE@TESTS_ENVIRONMENT = \
+@BUILD_TESTS_TRUE@ DOC_MODULE=$(DOC_MODULE) DOC_MAIN_SGML_FILE=$(DOC_MAIN_SGML_FILE) \
+@BUILD_TESTS_TRUE@ PATH=$(abs_top_builddir):$(srcdir):$(PATH) \
+@BUILD_TESTS_TRUE@ PERL5LIB=$(abs_top_builddir):$(PERL5LIB)
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/tests/gtk-doc.make $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/repro/docs/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu tests/repro/docs/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+$(top_srcdir)/tests/gtk-doc.make $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-local
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic \
+ maintainer-clean-local
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: all all-am check check-am check-local clean clean-generic \
+ clean-libtool clean-local cscopelist-am ctags-am distclean \
+ distclean-generic distclean-libtool distclean-local distdir \
+ dvi dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic maintainer-clean-local mostlyclean \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+check-local: html-build.stamp pdf-build.stamp
+ @ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
+ echo " DOC `$(DATE_FMT_CMD)$$tsd`: All done"
+
+docs: html-build.stamp pdf-build.stamp
+ @ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
+ echo " DOC `$(DATE_FMT_CMD)$$tsd`: All done"
+
+$(REPORT_FILES): sgml-build.stamp
+
+ts:
+ @echo >ts `date $(TS_FMT)`;
+
+#### setup ####
+
+setup-build.stamp: ts
+ -@if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
+ echo ' DOC Preparing build'; \
+ files=`echo $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types`; \
+ if test "x$$files" != "x" ; then \
+ for file in $$files ; do \
+ test -f $(abs_srcdir)/$$file && \
+ cp -pf $(abs_srcdir)/$$file $(abs_builddir)/ || true; \
+ done; \
+ fi; \
+ fi
+ @touch setup-build.stamp
+
+#### scan ####
+
+scan-build.stamp: ts setup-build.stamp $(HFILE_GLOB) $(CFILE_GLOB)
+ @ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
+ echo " DOC `$(DATE_FMT_CMD)$$tsd`: Scanning header files"
+ @_source_dir='' ; \
+ for i in $(DOC_SOURCE_DIR) ; do \
+ _source_dir="$${_source_dir} --source-dir=$$i" ; \
+ done ; \
+ echo "gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES)" >gtkdoc-scan.log; \
+ PATH=$(abs_top_builddir):$(PATH) PYTHONPATH=$(abs_top_builddir):$(abs_top_srcdir):$(PYTHONPATH) \
+ gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES) 2>&1 | tee -a gtkdoc-scan.log
+ @if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \
+ ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
+ echo " DOC `$(DATE_FMT_CMD)$$tsd`: Introspecting gobjects"; \
+ scanobj_options=""; \
+ if test "x$(V)" = "x1"; then \
+ scanobj_options="--verbose"; \
+ fi; \
+ echo "gtkdoc-scangobj $(SCANGOBJ_OPTIONS) --module=$(DOC_MODULE) $$scanobj_options" >gtkdoc-scangobj.log; \
+ PATH=$(abs_top_builddir):$(PATH) PYTHONPATH=$(abs_top_builddir):$(abs_top_srcdir):$(PYTHONPATH) \
+ CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \
+ gtkdoc-scangobj $(SCANGOBJ_OPTIONS) --module=$(DOC_MODULE) $$scanobj_options 2>&1 | tee -a gtkdoc-scangobj.log; \
+ else \
+ for i in $(SCANOBJ_FILES) ; do \
+ test -f $$i || touch $$i ; \
+ done \
+ fi
+ @touch scan-build.stamp
+
+$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
+ @true
+
+#### xml ####
+
+sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(HFILE_GLOB) $(CFILE_GLOB) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) xml/gtkdocentities.ent
+ @ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
+ echo " DOC `$(DATE_FMT_CMD)$$tsd`: Building XML"
+ @_source_dir='' ; \
+ for i in $(DOC_SOURCE_DIR) ; do \
+ _source_dir="$${_source_dir} --source-dir=$$i" ; \
+ done ; \
+ echo "gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS)" >gtkdoc-mkdb.log; \
+ PATH=$(abs_top_builddir):$(PATH) PYTHONPATH=$(abs_top_builddir):$(abs_top_srcdir):$(PYTHONPATH) \
+ gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS) 2>&1 | tee -a gtkdoc-mkdb.log
+ @touch sgml-build.stamp
+
+sgml.stamp: sgml-build.stamp
+ @true
+
+$(DOC_MAIN_SGML_FILE): sgml-build.stamp
+ @true
+
+xml/gtkdocentities.ent: Makefile
+ @$(MKDIR_P) $(@D) && ( \
+ echo "<!ENTITY package \"$(PACKAGE)\">"; \
+ echo "<!ENTITY package_bugreport \"$(PACKAGE_BUGREPORT)\">"; \
+ echo "<!ENTITY package_name \"$(PACKAGE_NAME)\">"; \
+ echo "<!ENTITY package_string \"$(PACKAGE_STRING)\">"; \
+ echo "<!ENTITY package_tarname \"$(PACKAGE_TARNAME)\">"; \
+ echo "<!ENTITY package_url \"$(PACKAGE_URL)\">"; \
+ echo "<!ENTITY package_version \"$(PACKAGE_VERSION)\">"; \
+ ) > $@
+
+#### html ####
+
+html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
+ @ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
+ echo " DOC `$(DATE_FMT_CMD)$$tsd`: Building HTML"
+ @rm -rf html
+ @mkdir html
+ @mkhtml_options=""; \
+ if test "x$(V)" = "x1"; then \
+ mkhtml_options="$$mkhtml_options --verbose"; \
+ fi; \
+ echo "gtkdoc-mkhtml --uninstalled --path="$(abs_srcdir)" $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)" >gtkdoc-mkhtml.log; \
+ cd html && PATH=$(abs_top_builddir):$(PATH) PYTHONPATH=$(abs_top_builddir):$(abs_top_srcdir):$(PYTHONPATH) ABS_TOP_SRCDIR=$(abs_top_srcdir) \
+ gtkdoc-mkhtml --uninstalled --path="$(abs_srcdir)" $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE) 2>&1 | tee -a ../gtkdoc-mkhtml.log
+ -@test "x$(HTML_IMAGES)" = "x" || \
+ for file in $(HTML_IMAGES) ; do \
+ if test -f $(abs_srcdir)/$$file ; then \
+ cp $(abs_srcdir)/$$file $(abs_builddir)/html; \
+ fi; \
+ if test -f $(abs_builddir)/$$file ; then \
+ cp $(abs_builddir)/$$file $(abs_builddir)/html; \
+ fi; \
+ done;
+ @ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
+ echo " DOC `$(DATE_FMT_CMD)$$tsd`: Fixing cross-references"
+ @echo "gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)" >gtkdoc-fixxref.log; \
+ PATH=$(abs_top_builddir):$(PATH) PYTHONPATH=$(abs_top_builddir):$(abs_top_srcdir):$(PYTHONPATH) \
+ gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS) 2>&1 | tee -a gtkdoc-fixxref.log
+ @touch html-build.stamp
+
+#### pdf ####
+
+pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
+ @ts1=`cat ts`;ts2=`date $(TS_FMT)`;tsd=`echo $$ts2-$$ts1 | bc`; \
+ echo " DOC `$(DATE_FMT_CMD)$$tsd`: Building PDF"
+ @rm -f $(DOC_MODULE).pdf
+ @mkpdf_options=""; \
+ if test "x$(V)" = "x1"; then \
+ mkpdf_options="$$mkpdf_options --verbose"; \
+ fi; \
+ if test "x$(HTML_IMAGES)" != "x"; then \
+ for img in $(HTML_IMAGES); do \
+ part=`dirname $$img`; \
+ echo $$mkpdf_options | grep >/dev/null "\-\-imgdir=$$part "; \
+ if test $$? != 0; then \
+ mkpdf_options="$$mkpdf_options --imgdir=$$part"; \
+ fi; \
+ done; \
+ fi; \
+ echo "gtkdoc-mkpdf --uninstalled --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS)" >gtkdoc-mkpdf.log; \
+ PATH=$(abs_top_builddir):$(PATH) PYTHONPATH=$(abs_top_builddir):$(abs_top_srcdir):$(PYTHONPATH) ABS_TOP_SRCDIR=$(abs_top_srcdir) \
+ gtkdoc-mkpdf --uninstalled --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS) 2>&1 | tee -a gtkdoc-mkpdf.log
+ @touch pdf-build.stamp
+
+##############
+
+# we need to enforce a rebuild for the tests
+clean-local:
+ @rm -f *~ *.bak ts gtkdoc-*.log
+ @rm -rf .libs
+ @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-types" ; then \
+ rm -f $(DOC_MODULE).types; \
+ fi
+ $(MAKE) distclean-local
+
+distclean-local:
+ @rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \
+ $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt
+ @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
+ rm -f $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types; \
+ fi
+
+maintainer-clean-local:
+ @rm -rf xml html
+
+.PHONY : dist-hook-local docs
+
+-include $(top_srcdir)/git.mk
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+<?xml version="1.0"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+ "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd"
+[
+ <!ENTITY % local.common.attrib "xmlns:xi CDATA #FIXED 'http://www.w3.org/2003/XInclude'">
+ <!ENTITY % gtkdocentities SYSTEM "xml/gtkdocentities.ent">
+ %gtkdocentities;
+]>
+<book id="index" xmlns:xi="http://www.w3.org/2003/XInclude">
+ <bookinfo>
+ <title>&package_name; Reference Manual</title>
+ <releaseinfo>
+ for &package_string;.
+ The latest version of this documentation can be found on-line at
+ <ulink role="online-location" url="http://[SERVER]/&package_name;/index.html">http://[SERVER]/&package_name;/</ulink>.
+ </releaseinfo>
+ </bookinfo>
+
+ <chapter>
+ <title>Tests</title>
+ <xi:include href="xml/tester.xml"/>
+ </chapter>
+
+ <index id="api-index">
+ <title>API Index</title>
+ <xi:include href="xml/api-index-full.xml"><xi:fallback /></xi:include>
+ </index>
+</book>
--- /dev/null
+<SECTION>
+<FILE>tester</FILE>
+FOO
+</SECTION>
+
--- /dev/null
+## Process this file with automake to produce Makefile.in
+
+if BUILD_TESTS
+
+noinst_LTLIBRARIES = libtester.la
+
+libtester_la_SOURCES = tester.c tester.h
+#libtester_la_LIBADD = $(TEST_DEPS_LIBS)
+
+AM_CPPFLAGS = $(TEST_DEPS_CFLAGS)
+
+endif
+
+
+-include $(top_srcdir)/git.mk
--- /dev/null
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = tests/repro/src
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gtkdoc_jh_check_xml_catalog.m4 \
+ $(top_srcdir)/m4/gtkdoc_jh_path_xml_catalog.m4 \
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LTLIBRARIES = $(noinst_LTLIBRARIES)
+libtester_la_LIBADD =
+am__libtester_la_SOURCES_DIST = tester.c tester.h
+@BUILD_TESTS_TRUE@am_libtester_la_OBJECTS = tester.lo
+libtester_la_OBJECTS = $(am_libtester_la_OBJECTS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 =
+@BUILD_TESTS_TRUE@am_libtester_la_rpath =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
+SOURCES = $(libtester_la_SOURCES)
+DIST_SOURCES = $(am__libtester_la_SOURCES_DIST)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/build-aux/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATE_FMT_CMD = @DATE_FMT_CMD@
+DBLATEX = @DBLATEX@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ELAPSED_FMT = @ELAPSED_FMT@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FOP = @FOP@
+GREP = @GREP@
+HELP_DIR = @HELP_DIR@
+HIGHLIGHT = @HIGHLIGHT@
+HIGHLIGHT_OPTIONS = @HIGHLIGHT_OPTIONS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ITSTOOL = @ITSTOOL@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_DATA_DIR = @PACKAGE_DATA_DIR@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PYTHON = @PYTHON@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_PACKAGE_DIR = @PYTHON_PACKAGE_DIR@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TEST_DEPS_CFLAGS = @TEST_DEPS_CFLAGS@
+TEST_DEPS_LIBS = @TEST_DEPS_LIBS@
+TS_FMT = @TS_FMT@
+VERSION = @VERSION@
+XMLCATALOG = @XMLCATALOG@
+XMLLINT = @XMLLINT@
+XML_CATALOG_FILE = @XML_CATALOG_FILE@
+XSLTPROC = @XSLTPROC@
+YELP_LC_DIST = @YELP_LC_DIST@
+YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+glib_prefix = @glib_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+@BUILD_TESTS_TRUE@noinst_LTLIBRARIES = libtester.la
+@BUILD_TESTS_TRUE@libtester_la_SOURCES = tester.c tester.h
+#libtester_la_LIBADD = $(TEST_DEPS_LIBS)
+@BUILD_TESTS_TRUE@AM_CPPFLAGS = $(TEST_DEPS_CFLAGS)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/repro/src/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu tests/repro/src/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstLTLIBRARIES:
+ -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+ @list='$(noinst_LTLIBRARIES)'; \
+ locs=`for p in $$list; do echo $$p; done | \
+ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+ sort -u`; \
+ test -z "$$locs" || { \
+ echo rm -f $${locs}; \
+ rm -f $${locs}; \
+ }
+
+libtester.la: $(libtester_la_OBJECTS) $(libtester_la_DEPENDENCIES) $(EXTRA_libtester_la_DEPENDENCIES)
+ $(AM_V_CCLD)$(LINK) $(am_libtester_la_rpath) $(libtester_la_OBJECTS) $(libtester_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tester.Plo@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+ clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \
+ ctags-am distclean distclean-compile distclean-generic \
+ distclean-libtool distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+-include $(top_srcdir)/git.mk
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+/**
+ * SECTION:tester
+ * @short_description: module for gtk-doc unit test
+ *
+ * This is a minimal doc module to serve easy to debug repro cases.
+ */
+
+#include "tester.h"
--- /dev/null
+#ifndef GTKDOC_TESTER_H
+#define GTKDOC_TESTER_H
+
+#include <glib.h>
+
+// FIXME: this should not be needed, if we have a title + long-desc
+/**
+ * FOO:
+ *
+ * Placeholder to have non empty docs.
+ */
+#define FOO 1
+
+#endif // GTKDOC_TESTER_H
tested=`expr $tested + 1`
# check that log files have only one line (the command)
+# discard references to launchapd bugs
nok=0
+DISCARD_PATTERN='Please fix https://bugs.launchpad.net/ubuntu/+source/gtk-doc/+bug/[0-9]* . For now run:
+gunzip .*.gz
+
+'
for file in $dir/*/docs/gtkdoc-*.log; do
expected_lines="1"
# adjust for known files
;;
esac
- lines=`wc -l $file | cut -d' ' -f1`
+ lines=`grep -v -x -G -e "$DISCARD_PATTERN" $file | wc -l | cut -d' ' -f1`
if test $lines -gt $expected_lines; then
echo 1>&2 "expected no more than $expected_lines log line in $file, but got $lines"
nok=`expr $nok + 1`;
projects / platform / upstream / gtk-doc.git / commitdiff