rpi: tizen-boot: rpi2: set console in cmdline as u-boot environment

The console in cmdline will be used by kernel as printk console
and tizen-boot script always sets console with UART device. Set
console in cmdline as u-boot environment value console and set
default uart if nothing is set.

Change-Id: I36f58c0532e0a10efb7844c14caeb21258c9b792
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

diff --git a/board/raspberrypi/rpi/tizen-boot-rpi2.scr b/board/raspberrypi/rpi/tizen-boot-rpi2.scr
index 6264cc1..5923f49 100644 (file)
--- a/board/raspberrypi/rpi/tizen-boot-rpi2.scr
+++ b/board/raspberrypi/rpi/tizen-boot-rpi2.scr
@@ -59,13 +59,19 @@ rootdev=mmcblk${mmcrootdev}p${mmcrootpart}
 bootmode=normal
 fi
 
+# setting console device if noting is set
+if test -z "${console}"; then;
+       setenv console "console=ttyAMA0,115200n8 earlyprintk"
+fi
+echo "console: ${console}"
+
 # Kernel image
 kernel=zImage
 setenv fdtfile \"bcm2709-rpi-2-b.dtb\"
 setenv boot_prefixes \"/\"
 
 # To use comdline for using serial console. /* Normal mode */
-setenv bootargs \"dma.dmachans=0x7f35 bcm2709.serial=0xed6687d3 bcm2709.uart_clock=48000000 smsc95xx.macaddr=${ethaddr} root=/dev/${rootdev} rw bootmode=${bootmode} bcm2709.boardrev=0xa02082 rootwait console=ttyAMA0,115200n8 earlyprintk vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 ${opts}\"
+setenv bootargs \"dma.dmachans=0x7f35 bcm2709.serial=0xed6687d3 bcm2709.uart_clock=48000000 smsc95xx.macaddr=${ethaddr} root=/dev/${rootdev} rw bootmode=${bootmode} bcm2709.boardrev=0xa02082 rootwait ${console} vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 ${opts}\"
 
 # Find the ramdisk offset and block count
 part start $bootdev $mmcrootdev $ramdiskpart ramdisk_start