-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
-# generated automatically by aclocal 1.11.5 -*- Autoconf -*-
+# generated automatically by aclocal 1.11.3 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically `autoreconf'.])])
# ----------------------------------
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
-m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
+m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
pkg_cv_[]$1="$$1"
elif test -n "$PKG_CONFIG"; then
PKG_CHECK_EXISTS([$3],
- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes ],
+ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
[pkg_failed=yes])
else
pkg_failed=untried
AC_MSG_RESULT([no])
_PKG_SHORT_ERRORS_SUPPORTED
if test $_pkg_short_errors_supported = yes; then
- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
else
- $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
-_PKG_TEXT])[]dnl
+_PKG_TEXT])
])
elif test $pkg_failed = untried; then
AC_MSG_RESULT([no])
_PKG_TEXT
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])
])
else
$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
[am__api_version='1.11'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.11.5], [],
+m4_if([$1], [1.11.3], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.5])dnl
+[AM_AUTOMAKE_VERSION([1.11.3])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
-scriptversion=2012-03-05.13; # UTC
+scriptversion=2012-01-04.17; # UTC
# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free
# Software Foundation, Inc.
esac
}
-# func_cl_dashL linkdir
-# Make cl look for libraries in LINKDIR
-func_cl_dashL ()
-{
- func_file_conv "$1"
- if test -z "$lib_path"; then
- lib_path=$file
- else
- lib_path="$lib_path;$file"
- fi
- linker_opts="$linker_opts -LIBPATH:$file"
-}
-
-# func_cl_dashl library
-# Do a library search-path lookup for cl
-func_cl_dashl ()
-{
- lib=$1
- found=no
- save_IFS=$IFS
- IFS=';'
- for dir in $lib_path $LIB
- do
- IFS=$save_IFS
- if $shared && test -f "$dir/$lib.dll.lib"; then
- found=yes
- lib=$dir/$lib.dll.lib
- break
- fi
- if test -f "$dir/$lib.lib"; then
- found=yes
- lib=$dir/$lib.lib
- break
- fi
- done
- IFS=$save_IFS
-
- if test "$found" != yes; then
- lib=$lib.lib
- fi
-}
-
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
;;
esac
;;
- -I)
- eat=1
- func_file_conv "$2" mingw
- set x "$@" -I"$file"
- shift
- ;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
- -l)
- eat=1
- func_cl_dashl "$2"
- set x "$@" "$lib"
- shift
- ;;
-l*)
- func_cl_dashl "${1#-l}"
- set x "$@" "$lib"
+ lib=${1#-l}
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ set x "$@" "$dir/$lib.dll.lib"
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ set x "$@" "$dir/$lib.lib"
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ test "$found" != yes && set x "$@" "$lib.lib"
shift
;;
- -L)
- eat=1
- func_cl_dashL "$2"
- ;;
-L*)
- func_cl_dashL "${1#-L}"
+ func_file_conv "${1#-L}"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
;;
-static)
shared=false
# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
# 2011, 2012 Free Software Foundation, Inc.
-timestamp='2012-02-10'
+timestamp='2012-01-01'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
exit ;;
- aarch64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- aarch64_be:Linux:*:*)
- UNAME_MACHINE=aarch64_be
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
EV5) UNAME_MACHINE=alphaev5 ;;
i*86:AROS:*:*)
echo ${UNAME_MACHINE}-pc-aros
exit ;;
- x86_64:VMkernel:*:*)
- echo ${UNAME_MACHINE}-unknown-esx
- exit ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
# 2011, 2012 Free Software Foundation, Inc.
-timestamp='2012-02-10'
+timestamp='2012-01-01'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
- android-linux)
- os=-linux-android
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
- ;;
*)
basic_machine=`echo $1 | sed 's/-[^-]*$//'`
if [ $basic_machine != $1 ]
# Some are omitted here because they have special meanings below.
1750a | 580 \
| a29k \
- | aarch64 | aarch64_be \
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| am33_2.0 \
c6x)
basic_machine=tic6x-unknown
;;
- m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
+ m6811 | m68hc11 | m6812 | m68hc12 | picochip)
basic_machine=$basic_machine-unknown
os=-none
;;
strongarm | thumb | xscale)
basic_machine=arm-unknown
;;
- xgate)
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
+
xscaleeb)
basic_machine=armeb-unknown
;;
# Recognize the basic CPU types with company name.
580-* \
| a29k-* \
- | aarch64-* | aarch64_be-* \
| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2012-03-27.16; # UTC
+scriptversion=2011-12-04.11; # UTC
# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
+# 2011 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
case $1 in
'')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
Environment variables:
depmode Dependency tracking mode.
- source Source file read by 'PROGRAMS ARGS'.
- object Object file output by 'PROGRAMS ARGS'.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputting dependencies.
;;
esac
-# A tabulation character.
-tab=' '
-# A newline character.
-nl='
-'
-
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
depmode=msvc7
fi
-if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
-fi
-
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
+## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
- tr ' ' "$nl" < "$tmpdepfile" |
-## Some versions of gcc put a space before the ':'. On the theory
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like '#:fec' to the end of the
+ # the IRIX cc adds comments like `#:fec' to the end of the
# dependency line.
- tr ' ' "$nl" < "$tmpdepfile" \
+ tr ' ' '
+' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr "$nl" ' ' >> "$depfile"
+ tr '
+' ' ' >> "$depfile"
echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
- tr ' ' "$nl" < "$tmpdepfile" \
+ tr ' ' '
+' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> "$depfile"
else
rm -f "$tmpdepfile"
;;
-xlc)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts '$object:' at the
+ # current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependent.h'.
+ # Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
+ # `$object: dependent.h' and one to simply `dependent.h:'.
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
;;
icc)
- # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
- # However on
- # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
# ICC 7.0 will fill foo.d with something like
# foo.o: sub/foo.c
# foo.o: sub/foo.h
- # which is wrong. We want
+ # which is wrong. We want:
# sub/foo.o: sub/foo.c
# sub/foo.o: sub/foo.h
# sub/foo.c:
# sub/foo.h:
# ICC 7.1 will output
# foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\':
+ # and will wrap long lines using \ :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
- # tcc 0.9.26 (FIXME still under development at the moment of writing)
- # will emit a similar output, but also prepend the continuation lines
- # with horizontal tabulation characters.
+
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
exit $stat
fi
rm -f "$depfile"
- # Each line is of the form 'foo.o: dependent.h',
- # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
- < "$tmpdepfile" > "$depfile"
- sed '
- s/[ '"$tab"'][ '"$tab"']*/ /g
- s/^ *//
- s/ *\\*$//
- s/^[^:]*: *//
- /^$/d
- /:$/d
- s/$/ :/
- ' < "$tmpdepfile" >> "$depfile"
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add 'dependent.h:' lines.
+ # Add `dependent.h:' lines.
sed -ne '2,${
s/^ *//
s/ \\*$//
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
+ # dependencies in `foo.d' instead, so we check for that too.
# Subdirectories are respected.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
p
}' | $cygpath_u | sort -u | sed -n '
s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
+s/\(.*\)/ \1 \\/p
s/.\(.*\) \\/\1:/
H
$ {
- s/.*/'"$tab"'/
+ s/.*/ /
G
p
}' >> "$depfile"
shift
fi
- # Remove '-o $object'.
+ # Remove `-o $object'.
IFS=" "
for arg
do
done
test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for ':'
+ # Require at least two characters before searching for `:'
# in the target name. This is to cope with DOS-style filenames:
- # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
"$@" $dashmflag |
- sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- tr ' ' "$nl" < "$tmpdepfile" | \
+ tr ' ' '
+' < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
shift
fi
- # Remove '-o $object'.
+ # Remove `-o $object'.
IFS=" "
for arg
do
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
- echo "$tab" >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
/* Version number of package */
#undef VERSION
-/* Enable large inode numbers on Mac OS X 10.5. */
-#ifndef _DARWIN_USE_64_BIT_INODE
-# define _DARWIN_USE_64_BIT_INODE 1
-#endif
-
/* Number of bits in a file offset, on hosts where this is settable. */
#undef _FILE_OFFSET_BITS
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for plymouth 0.8.6.1.
+# Generated by GNU Autoconf 2.68 for plymouth 0.8.8.
#
# Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=plymouth>.
#
#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
#
#
# This configure script is free software; the Free Software Foundation
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-# Use a proper internal environment variable to ensure we don't fall
- # into an infinite loop, continuously re-executing ourselves.
- if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
- _as_can_reexec=no; export _as_can_reexec;
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
- fi
- # We don't want this to propagate to other subprocesses.
- { _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
else
exitcode=1; echo positional parameters were not saved.
fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
+test x\$exitcode = x0 || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
if test "x$CONFIG_SHELL" != x; then :
- export CONFIG_SHELL
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ # Preserve -v and -x to the replacement shell.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+ esac
+ exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
fi
if test x$as_have_required = xno; then :
} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
chmod +x "$as_me.lineno" ||
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
- # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
- # already done that, so ensure we don't try to do so again and fall
- # in an infinite loop. This has already happened in practice.
- _as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
+ # In both cases, we have to default to `cp -p'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
+ as_ln_s='cp -p'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -pR'
+ as_ln_s='cp -p'
fi
else
- as_ln_s='cp -pR'
+ as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
as_mkdir_p=false
fi
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Identity of this package.
PACKAGE_NAME='plymouth'
PACKAGE_TARNAME='plymouth'
-PACKAGE_VERSION='0.8.6.1'
-PACKAGE_STRING='plymouth 0.8.6.1'
+PACKAGE_VERSION='0.8.8'
+PACKAGE_STRING='plymouth 0.8.8'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=plymouth'
PACKAGE_URL=''
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
+ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used" >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures plymouth 0.8.6.1 to adapt to many kinds of systems.
+\`configure' configures plymouth 0.8.8 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of plymouth 0.8.6.1:";;
+ short | recursive ) echo "Configuration of plymouth 0.8.8:";;
esac
cat <<\_ACEOF
splash plugins
--with-release-file=<path_to_release_file>
Release File to use to detect distribution (by
- default /etc/system-reelase)
+ default /etc/system-release)
--with-boot-tty=<tty> Default TTY to use in boot mode (by default tty1)
--with-shutdown-tty=<tty>
Default TTY to use in shutdown mode (by default
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-plymouth configure 0.8.6.1
-generated by GNU Autoconf 2.69
+plymouth configure 0.8.8
+generated by GNU Autoconf 2.68
-Copyright (C) 2012 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
test ! -s conftest.err
} && test -s conftest$ac_exeext && {
test "$cross_compiling" = yes ||
- test -x conftest$ac_exeext
+ $as_test_x conftest$ac_exeext
}; then :
ac_retval=0
else
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by plymouth $as_me 0.8.6.1, which was
-generated by GNU Autoconf 2.69. Invocation command line was
+It was created by plymouth $as_me 0.8.8, which was
+generated by GNU Autoconf 2.68. Invocation command line was
$ $0 $@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
/* end confdefs.h. */
#include <stdarg.h>
#include <stdio.h>
-struct stat;
+#include <sys/types.h>
+#include <sys/stat.h>
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
for ac_prog in grep ggrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_GREP" || continue
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
# Check for GNU ac_path_GREP and select it if it is found.
# Check for GNU $ac_path_GREP
case `"$ac_path_GREP" --version 2>&1` in
for ac_prog in egrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_EGREP" || continue
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
# Check for GNU ac_path_EGREP and select it if it is found.
# Check for GNU $ac_path_EGREP
case `"$ac_path_EGREP" --version 2>&1` in
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-# define __EXTENSIONS__ 1
- $ac_includes_default
+# define __EXTENSIONS__ 1
+ $ac_includes_default
int
main ()
{
esac
rm -rf conftest*
fi
-
-
fi
for ac_prog in gawk mawk nawk awk
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AWK="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
/* end confdefs.h. */
#include <stdarg.h>
#include <stdio.h>
-struct stat;
+#include <sys/types.h>
+#include <sys/stat.h>
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
int
main ()
{
-
+/* FIXME: Include the comments suggested by Paul. */
#ifndef __cplusplus
- /* Ultrix mips cc rejects this sort of thing. */
+ /* Ultrix mips cc rejects this. */
typedef int charset[2];
- const charset cs = { 0, 0 };
+ const charset cs;
/* SunOS 4.1.1 cc rejects this. */
char const *const *pcpcc;
char **ppc;
++pcpcc;
ppc = (char**) pcpcc;
pcpcc = (char const *const *) ppc;
- { /* SCO 3.2v4 cc rejects this sort of thing. */
- char tx;
- char *t = &tx;
+ { /* SCO 3.2v4 cc rejects this. */
+ char *t;
char const *s = 0 ? (char *) 0 : (char const *) 0;
*t++ = 0;
iptr p = 0;
++p;
}
- { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
+ { /* AIX XL C 1.02.0.0 rejects this saying
"k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; } bx;
- struct s *b = &bx; b->j = 5;
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
}
{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
const int foo = 10;
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_STRIP="strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
test -z "$as_dir" && as_dir=.
for ac_prog in mkdir gmkdir; do
for ac_exec_ext in '' $ac_executable_extensions; do
- as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
'mkdir (GNU coreutils) '* | \
'mkdir (coreutils) '* | \
# Define the identity of the package.
PACKAGE='plymouth'
- VERSION='0.8.6.1'
+ VERSION='0.8.8'
cat >>confdefs.h <<_ACEOF
-
if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
for ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_SED" || continue
+ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
# Check for GNU ac_path_SED and select it if it is found.
# Check for GNU $ac_path_SED
case `"$ac_path_SED" --version 2>&1` in
for ac_prog in fgrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_FGREP" || continue
+ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
# Check for GNU ac_path_FGREP and select it if it is found.
# Check for GNU $ac_path_FGREP
case `"$ac_path_FGREP" --version 2>&1` in
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_OBJDUMP="objdump"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_DLLTOOL="dlltool"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_AR="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_STRIP="strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_RANLIB="ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_NMEDIT="nmedit"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_LIPO="lipo"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_OTOOL="otool"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_OTOOL64="otool64"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_IMAGE_CFLAGS=`$PKG_CONFIG --cflags "libpng >= 1.2.16 " 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_IMAGE_LIBS=`$PKG_CONFIG --libs "libpng >= 1.2.16 " 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- IMAGE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libpng >= 1.2.16 " 2>&1`
+ IMAGE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libpng >= 1.2.16 " 2>&1`
else
- IMAGE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libpng >= 1.2.16 " 2>&1`
+ IMAGE_PKG_ERRORS=`$PKG_CONFIG --print-errors "libpng >= 1.2.16 " 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$IMAGE_PKG_ERRORS" >&5
Alternatively, you may set the environment variables IMAGE_CFLAGS
and IMAGE_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
IMAGE_CFLAGS=$pkg_cv_IMAGE_CFLAGS
IMAGE_LIBS=$pkg_cv_IMAGE_LIBS
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_PANGO_CFLAGS=`$PKG_CONFIG --cflags "pangocairo >= 1.21.0 " 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_PANGO_LIBS=`$PKG_CONFIG --libs "pangocairo >= 1.21.0 " 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- PANGO_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "pangocairo >= 1.21.0 " 2>&1`
+ PANGO_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "pangocairo >= 1.21.0 " 2>&1`
else
- PANGO_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "pangocairo >= 1.21.0 " 2>&1`
+ PANGO_PKG_ERRORS=`$PKG_CONFIG --print-errors "pangocairo >= 1.21.0 " 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$PANGO_PKG_ERRORS" >&5
Alternatively, you may set the environment variables PANGO_CFLAGS
and PANGO_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
PANGO_CFLAGS=$pkg_cv_PANGO_CFLAGS
PANGO_LIBS=$pkg_cv_PANGO_LIBS
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0 >= 2.12.0 " 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-2.0 >= 2.12.0 " 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gtk+-2.0 >= 2.12.0 " 2>&1`
+ GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gtk+-2.0 >= 2.12.0 " 2>&1`
else
- GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gtk+-2.0 >= 2.12.0 " 2>&1`
+ GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors "gtk+-2.0 >= 2.12.0 " 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$GTK_PKG_ERRORS" >&5
Alternatively, you may set the environment variables GTK_CFLAGS
and GTK_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
GTK_CFLAGS=$pkg_cv_GTK_CFLAGS
GTK_LIBS=$pkg_cv_GTK_LIBS
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_DRM_INTEL_CFLAGS=`$PKG_CONFIG --cflags "libdrm libdrm_intel" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_DRM_INTEL_LIBS=`$PKG_CONFIG --libs "libdrm libdrm_intel" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- DRM_INTEL_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libdrm libdrm_intel" 2>&1`
+ DRM_INTEL_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libdrm libdrm_intel" 2>&1`
else
- DRM_INTEL_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libdrm libdrm_intel" 2>&1`
+ DRM_INTEL_PKG_ERRORS=`$PKG_CONFIG --print-errors "libdrm libdrm_intel" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$DRM_INTEL_PKG_ERRORS" >&5
Alternatively, you may set the environment variables DRM_INTEL_CFLAGS
and DRM_INTEL_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
DRM_INTEL_CFLAGS=$pkg_cv_DRM_INTEL_CFLAGS
DRM_INTEL_LIBS=$pkg_cv_DRM_INTEL_LIBS
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_DRM_RADEON_CFLAGS=`$PKG_CONFIG --cflags "libdrm libdrm_radeon" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_DRM_RADEON_LIBS=`$PKG_CONFIG --libs "libdrm libdrm_radeon" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- DRM_RADEON_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libdrm libdrm_radeon" 2>&1`
+ DRM_RADEON_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libdrm libdrm_radeon" 2>&1`
else
- DRM_RADEON_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libdrm libdrm_radeon" 2>&1`
+ DRM_RADEON_PKG_ERRORS=`$PKG_CONFIG --print-errors "libdrm libdrm_radeon" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$DRM_RADEON_PKG_ERRORS" >&5
Alternatively, you may set the environment variables DRM_RADEON_CFLAGS
and DRM_RADEON_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
DRM_RADEON_CFLAGS=$pkg_cv_DRM_RADEON_CFLAGS
DRM_RADEON_LIBS=$pkg_cv_DRM_RADEON_LIBS
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_DRM_NOUVEAU_CFLAGS=`$PKG_CONFIG --cflags "libdrm libdrm_nouveau" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_DRM_NOUVEAU_LIBS=`$PKG_CONFIG --libs "libdrm libdrm_nouveau" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- DRM_NOUVEAU_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libdrm libdrm_nouveau" 2>&1`
+ DRM_NOUVEAU_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libdrm libdrm_nouveau" 2>&1`
else
- DRM_NOUVEAU_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libdrm libdrm_nouveau" 2>&1`
+ DRM_NOUVEAU_PKG_ERRORS=`$PKG_CONFIG --print-errors "libdrm libdrm_nouveau" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$DRM_NOUVEAU_PKG_ERRORS" >&5
Alternatively, you may set the environment variables DRM_NOUVEAU_CFLAGS
and DRM_NOUVEAU_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
DRM_NOUVEAU_CFLAGS=$pkg_cv_DRM_NOUVEAU_CFLAGS
DRM_NOUVEAU_LIBS=$pkg_cv_DRM_NOUVEAU_LIBS
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LIBKMS_CFLAGS=`$PKG_CONFIG --cflags "libdrm libkms" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LIBKMS_LIBS=`$PKG_CONFIG --libs "libdrm libkms" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- LIBKMS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libdrm libkms" 2>&1`
+ LIBKMS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libdrm libkms" 2>&1`
else
- LIBKMS_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libdrm libkms" 2>&1`
+ LIBKMS_PKG_ERRORS=`$PKG_CONFIG --print-errors "libdrm libkms" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$LIBKMS_PKG_ERRORS" >&5
Alternatively, you may set the environment variables LIBKMS_CFLAGS
and LIBKMS_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
LIBKMS_CFLAGS=$pkg_cv_LIBKMS_CFLAGS
LIBKMS_LIBS=$pkg_cv_LIBKMS_LIBS
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_DRM_CFLAGS=`$PKG_CONFIG --cflags "libdrm" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_DRM_LIBS=`$PKG_CONFIG --libs "libdrm" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- DRM_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libdrm" 2>&1`
+ DRM_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libdrm" 2>&1`
else
- DRM_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libdrm" 2>&1`
+ DRM_PKG_ERRORS=`$PKG_CONFIG --print-errors "libdrm" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$DRM_PKG_ERRORS" >&5
Alternatively, you may set the environment variables DRM_CFLAGS
and DRM_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
DRM_CFLAGS=$pkg_cv_DRM_CFLAGS
DRM_LIBS=$pkg_cv_DRM_LIBS
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags "dbus-1" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs "dbus-1" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "dbus-1" 2>&1`
+ DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "dbus-1" 2>&1`
else
- DBUS_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "dbus-1" 2>&1`
+ DBUS_PKG_ERRORS=`$PKG_CONFIG --print-errors "dbus-1" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$DBUS_PKG_ERRORS" >&5
Alternatively, you may set the environment variables DBUS_CFLAGS
and DBUS_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS
DBUS_LIBS=$pkg_cv_DBUS_LIBS
exec_prefix=$exec_prefix_save
-ac_config_files="$ac_config_files Makefile src/libply/Makefile src/libply-splash-core/Makefile src/libply-splash-graphics/Makefile src/ply-splash-core.pc src/ply-splash-graphics.pc src/plugins/Makefile src/plugins/renderers/Makefile src/plugins/renderers/frame-buffer/Makefile src/plugins/renderers/drm/Makefile src/plugins/renderers/x11/Makefile src/plugins/splash/Makefile src/plugins/splash/throbgress/Makefile src/plugins/splash/fade-throbber/Makefile src/plugins/splash/text/Makefile src/plugins/splash/details/Makefile src/plugins/splash/space-flares/Makefile src/plugins/splash/two-step/Makefile src/plugins/splash/script/Makefile src/plugins/controls/Makefile src/plugins/controls/label/Makefile src/Makefile src/client/ply-boot-client.pc src/client/Makefile src/viewer/Makefile src/upstart-bridge/Makefile src/tests/Makefile src/libply/tests/Makefile src/client/tests/Makefile themes/Makefile themes/spinfinity/Makefile themes/fade-in/Makefile themes/text/Makefile themes/details/Makefile themes/solar/Makefile themes/glow/Makefile themes/spinner/Makefile themes/script/Makefile images/Makefile scripts/plymouth-generate-initrd scripts/plymouth-populate-initrd scripts/plymouth-set-default-theme scripts/Makefile systemd-units/plymouth-halt.service systemd-units/plymouth-kexec.service systemd-units/plymouth-poweroff.service systemd-units/plymouth-quit.service systemd-units/plymouth-quit-wait.service systemd-units/plymouth-read-write.service systemd-units/plymouth-reboot.service systemd-units/plymouth-start.service systemd-units/systemd-ask-password-plymouth.path systemd-units/systemd-ask-password-plymouth.service systemd-units/Makefile docs/Makefile"
+ac_config_files="$ac_config_files Makefile src/libply/Makefile src/libply-splash-core/Makefile src/libply-splash-graphics/Makefile src/ply-splash-core.pc src/ply-splash-graphics.pc src/plugins/Makefile src/plugins/renderers/Makefile src/plugins/renderers/frame-buffer/Makefile src/plugins/renderers/drm/Makefile src/plugins/renderers/x11/Makefile src/plugins/splash/Makefile src/plugins/splash/throbgress/Makefile src/plugins/splash/fade-throbber/Makefile src/plugins/splash/text/Makefile src/plugins/splash/details/Makefile src/plugins/splash/space-flares/Makefile src/plugins/splash/two-step/Makefile src/plugins/splash/script/Makefile src/plugins/controls/Makefile src/plugins/controls/label/Makefile src/Makefile src/client/ply-boot-client.pc src/client/Makefile src/viewer/Makefile src/upstart-bridge/Makefile src/tests/Makefile src/libply/tests/Makefile src/client/tests/Makefile themes/Makefile themes/spinfinity/Makefile themes/fade-in/Makefile themes/text/Makefile themes/details/Makefile themes/solar/Makefile themes/glow/Makefile themes/spinner/Makefile themes/script/Makefile images/Makefile scripts/plymouth-generate-initrd scripts/plymouth-populate-initrd scripts/plymouth-set-default-theme scripts/Makefile systemd-units/plymouth-halt.service systemd-units/plymouth-kexec.service systemd-units/plymouth-poweroff.service systemd-units/plymouth-quit.service systemd-units/plymouth-quit-wait.service systemd-units/plymouth-read-write.service systemd-units/plymouth-reboot.service systemd-units/plymouth-start.service systemd-units/plymouth-switch-root.service systemd-units/systemd-ask-password-plymouth.path systemd-units/systemd-ask-password-plymouth.service systemd-units/Makefile docs/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
+ # In both cases, we have to default to `cp -p'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
+ as_ln_s='cp -p'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -pR'
+ as_ln_s='cp -p'
fi
else
- as_ln_s='cp -pR'
+ as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
as_mkdir_p=false
fi
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by plymouth $as_me 0.8.6.1, which was
-generated by GNU Autoconf 2.69. Invocation command line was
+This file was extended by plymouth $as_me 0.8.8, which was
+generated by GNU Autoconf 2.68. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-plymouth config.status 0.8.6.1
-configured by $0, generated by GNU Autoconf 2.69,
+plymouth config.status 0.8.8
+configured by $0, generated by GNU Autoconf 2.68,
with options \\"\$ac_cs_config\\"
-Copyright (C) 2012 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
- set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
shift
\$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
CONFIG_SHELL='$SHELL'
"systemd-units/plymouth-read-write.service") CONFIG_FILES="$CONFIG_FILES systemd-units/plymouth-read-write.service" ;;
"systemd-units/plymouth-reboot.service") CONFIG_FILES="$CONFIG_FILES systemd-units/plymouth-reboot.service" ;;
"systemd-units/plymouth-start.service") CONFIG_FILES="$CONFIG_FILES systemd-units/plymouth-start.service" ;;
+ "systemd-units/plymouth-switch-root.service") CONFIG_FILES="$CONFIG_FILES systemd-units/plymouth-switch-root.service" ;;
"systemd-units/systemd-ask-password-plymouth.path") CONFIG_FILES="$CONFIG_FILES systemd-units/systemd-ask-password-plymouth.path" ;;
"systemd-units/systemd-ask-password-plymouth.service") CONFIG_FILES="$CONFIG_FILES systemd-units/systemd-ask-password-plymouth.service" ;;
"systemd-units/Makefile") CONFIG_FILES="$CONFIG_FILES systemd-units/Makefile" ;;
-AC_INIT([plymouth],[0.8.6.1],[https://bugs.freedesktop.org/enter_bug.cgi?product=plymouth])
+AC_INIT([plymouth],[0.8.8],[https://bugs.freedesktop.org/enter_bug.cgi?product=plymouth])
AC_CONFIG_SRCDIR(src/main.c)
AC_CONFIG_HEADER(config.h)
AC_CONFIG_AUX_DIR(build-tools)
AC_ARG_WITH(background-end-color-stop, AS_HELP_STRING([--with-background-end-color-stop],[first color end in background gradients used by boot splash plugins]),background_end_color=${withval},background_end_color=0x3a362f)
AC_SUBST(background_end_color)
-AC_ARG_WITH(release-file, AS_HELP_STRING([--with-release-file=<path_to_release_file>],[Release File to use to detect distribution (by default /etc/system-reelase)]),RELEASE_FILE=${withval},RELEASE_FILE=/etc/system-release)
+AC_ARG_WITH(release-file, AS_HELP_STRING([--with-release-file=<path_to_release_file>],[Release File to use to detect distribution (by default /etc/system-release)]),RELEASE_FILE=${withval},RELEASE_FILE=/etc/system-release)
AC_SUBST(RELEASE_FILE)
AC_DEFINE_UNQUOTED(RELEASE_FILE, "$RELEASE_FILE", [Release file path])
systemd-units/plymouth-read-write.service
systemd-units/plymouth-reboot.service
systemd-units/plymouth-start.service
+ systemd-units/plymouth-switch-root.service
systemd-units/systemd-ask-password-plymouth.path
systemd-units/systemd-ask-password-plymouth.service
systemd-units/Makefile
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-rm -rf .libs _libs
install-man8: $(dist_man_MANS)
@$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(dist_man_MANS)'; \
- test -n "$(man8dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.8[a-z]*$$/p'; \
- fi; \
+ test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
+ @list=''; test -n "$(man8dir)" || exit 0; \
+ { for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.8[a-z]*$$/p'; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-rm -rf .libs _libs
install-imageDATA: $(image_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(imagedir)" || $(MKDIR_P) "$(DESTDIR)$(imagedir)"
@list='$(image_DATA)'; test -n "$(imagedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(imagedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(imagedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
install-initrdscriptSCRIPTS: $(initrdscript_SCRIPTS)
@$(NORMAL_INSTALL)
+ test -z "$(initrdscriptdir)" || $(MKDIR_P) "$(DESTDIR)$(initrdscriptdir)"
@list='$(initrdscript_SCRIPTS)'; test -n "$(initrdscriptdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(initrdscriptdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(initrdscriptdir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
dir='$(DESTDIR)$(initrdscriptdir)'; $(am__uninstall_files_from_dir)
install-sbinscriptsSCRIPTS: $(sbinscripts_SCRIPTS)
@$(NORMAL_INSTALL)
+ test -z "$(sbinscriptsdir)" || $(MKDIR_P) "$(DESTDIR)$(sbinscriptsdir)"
@list='$(sbinscripts_SCRIPTS)'; test -n "$(sbinscriptsdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbinscriptsdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbinscriptsdir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
[ -z "$PLYMOUTH_POLICYDIR" ] && PLYMOUTH_POLICYDIR="@PLYMOUTH_POLICY_DIR@"
[ -z "$PLYMOUTH_DAEMON_PATH" ] && PLYMOUTH_DAEMON_PATH="@PLYMOUTH_DAEMON_DIR@/plymouthd"
[ -z "$PLYMOUTH_CLIENT_PATH" ] && PLYMOUTH_CLIENT_PATH="@PLYMOUTH_CLIENT_DIR@/plymouth"
+[ -z "$SYSTEMD_UNIT_DIR" ] && SYSTEMD_UNIT_DIR="@SYSTEMD_UNIT_DIR@"
# Generic substring function. If $2 is in $1, return 0.
strstr() { [ "${1#*$2*}" != "$1" ]; }
[ -z "$INITRDDIR" ] && usage error
mkdir -p ${INITRDDIR}${PLYMOUTH_DATADIR}/plymouth/themes
-inst ${PLYMOUTH_DAEMON_PATH} $INITRDDIR /bin/plymouthd
+inst ${PLYMOUTH_DAEMON_PATH} $INITRDDIR /sbin/plymouthd
inst ${PLYMOUTH_CLIENT_PATH} $INITRDDIR /bin/plymouth
inst ${PLYMOUTH_DATADIR}/plymouth/themes/text/text.plymouth $INITRDDIR
inst ${PLYMOUTH_PLUGIN_PATH}/text.so $INITRDDIR
cp -a ${PLYMOUTH_DATADIR}/plymouth/themes/default.plymouth $INITRDDIR${PLYMOUTH_DATADIR}/plymouth/themes
fi
+if [ -n "$SYSTEMD_UNIT_DIR" -a -d "$SYSTEMD_UNIT_DIR" ]; then
+ inst $SYSTEMD_UNIT_DIR/systemd-ask-password-plymouth.path $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/systemd-ask-password-plymouth.service $INITRDDIR
+
+ inst $SYSTEMD_UNIT_DIR/plymouth-switch-root.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/plymouth-start.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/plymouth-quit.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/plymouth-quit-wait.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/plymouth-reboot.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/plymouth-kexec.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/plymouth-poweroff.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/plymouth-halt.service $INITRDDIR
+
+ inst $SYSTEMD_UNIT_DIR/initrd-switch-root.target.wants/plymouth-switch-root.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/sysinit.target.wants/plymouth-start.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/multi-user.target.wants/plymouth-quit.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/multi-user.target.wants/plymouth-quit-wait.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/reboot.target.wants/plymouth-reboot.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/kexec.target.wants/plymouth-kexec.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/poweroff.target.wants/plymouth-poweroff.service $INITRDDIR
+ inst $SYSTEMD_UNIT_DIR/halt.target.wants/plymouth-halt.service $INITRDDIR
+fi
+
# vim:ts=8:sw=4:sts=4:et
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
install-plymouthdbinPROGRAMS: $(plymouthdbin_PROGRAMS)
@$(NORMAL_INSTALL)
+ test -z "$(plymouthdbindir)" || $(MKDIR_P) "$(DESTDIR)$(plymouthdbindir)"
@list='$(plymouthdbin_PROGRAMS)'; test -n "$(plymouthdbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(plymouthdbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plymouthdbindir)" || exit 1; \
- fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p || test -f $$p1; \
-rm -rf .libs _libs
install-dist_plymouthd_confDATA: $(dist_plymouthd_conf_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(plymouthd_confdir)" || $(MKDIR_P) "$(DESTDIR)$(plymouthd_confdir)"
@list='$(dist_plymouthd_conf_DATA)'; test -n "$(plymouthd_confdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(plymouthd_confdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plymouthd_confdir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
dir='$(DESTDIR)$(plymouthd_confdir)'; $(am__uninstall_files_from_dir)
install-dist_plymouthd_defaultsDATA: $(dist_plymouthd_defaults_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(plymouthd_defaultsdir)" || $(MKDIR_P) "$(DESTDIR)$(plymouthd_defaultsdir)"
@list='$(dist_plymouthd_defaults_DATA)'; test -n "$(plymouthd_defaultsdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(plymouthd_defaultsdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plymouthd_defaultsdir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
dir='$(DESTDIR)$(plymouthd_defaultsdir)'; $(am__uninstall_files_from_dir)
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
DATA = $(pkgconfig_DATA)
HEADERS = $(libply_boot_client_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
}
$(AM_V_CCLD)$(libply_boot_client_la_LINK) -rpath $(libdir) $(libply_boot_client_la_OBJECTS) $(libply_boot_client_la_LIBADD) $(LIBS)
install-plymouthPROGRAMS: $(plymouth_PROGRAMS)
@$(NORMAL_INSTALL)
+ test -z "$(plymouthdir)" || $(MKDIR_P) "$(DESTDIR)$(plymouthdir)"
@list='$(plymouth_PROGRAMS)'; test -n "$(plymouthdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(plymouthdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plymouthdir)" || exit 1; \
- fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p || test -f $$p1; \
-rm -rf .libs _libs
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
install-libply_boot_clientHEADERS: $(libply_boot_client_HEADERS)
@$(NORMAL_INSTALL)
+ test -z "$(libply_boot_clientdir)" || $(MKDIR_P) "$(DESTDIR)$(libply_boot_clientdir)"
@list='$(libply_boot_client_HEADERS)'; test -n "$(libply_boot_clientdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(libply_boot_clientdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(libply_boot_clientdir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__tty_colors = \
red=; grn=; lgn=; blu=; std=
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(libply_splash_core_la_SOURCES)
DIST_SOURCES = $(libply_splash_core_la_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
HEADERS = $(libply_splash_core_HEADERS)
ETAGS = etags
CTAGS = ctags
$(am__aclocal_m4_deps):
install-libraryLTLIBRARIES: $(library_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(librarydir)" || $(MKDIR_P) "$(DESTDIR)$(librarydir)"
@list='$(library_LTLIBRARIES)'; test -n "$(librarydir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(librarydir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(librarydir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(librarydir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(librarydir)"; \
}
-rm -rf .libs _libs
install-libply_splash_coreHEADERS: $(libply_splash_core_HEADERS)
@$(NORMAL_INSTALL)
+ test -z "$(libply_splash_coredir)" || $(MKDIR_P) "$(DESTDIR)$(libply_splash_coredir)"
@list='$(libply_splash_core_HEADERS)'; test -n "$(libply_splash_coredir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(libply_splash_coredir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(libply_splash_coredir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
assert (splash->loop != NULL);
assert (splash->plugin_interface != NULL);
assert (splash->plugin != NULL);
- assert (splash->plugin_interface->system_update != NULL);
+
+ if (splash->plugin_interface->system_update == NULL)
+ return false;
ply_trace ("updating system %i%%", progress);
splash->plugin_interface->system_update (splash->plugin,
ply_terminal_color_t color)
{
uint8_t red, green, blue;
- uint32_t hex_value;
assert (terminal != NULL);
assert (color <= PLY_TERMINAL_COLOR_WHITE);
- red = (uint8_t) *(terminal->color_palette + 3 * color);
- green = (uint8_t) *(terminal->color_palette + 3 * color + 1);
- blue = (uint8_t) *(terminal->color_palette + 3 * color + 2);
+ red = terminal->color_palette[3*color];
+ green = terminal->color_palette[3*color+1];
+ blue = terminal->color_palette[3*color+2];
- hex_value = red << 16 | green << 8 | blue;
-
- return hex_value;
+ return red << 16 | green << 8 | blue;
}
void
ply_terminal_color_t color,
uint32_t hex_value)
{
- uint8_t red, green, blue;
-
assert (terminal != NULL);
assert (color <= PLY_TERMINAL_COLOR_WHITE);
- red = (uint8_t) ((hex_value >> 16) & 0xff);
- green = (uint8_t) ((hex_value >> 8) & 0xff);
- blue = (uint8_t) (hex_value & 0xff);
-
- *(terminal->color_palette + 3 * color) = red;
- *(terminal->color_palette + 3 * color + 1) = green;
- *(terminal->color_palette + 3 * color + 2) = blue;
+ terminal->color_palette[3*color] = (hex_value >> 16) & 0xff;
+ terminal->color_palette[3*color+1] = (hex_value >> 8) & 0xff;
+ terminal->color_palette[3*color+2] = hex_value & 0xff;
ply_terminal_change_color_palette (terminal);
}
if (pos2 != NULL)
*pos2 = '\0';
+ if ((*pos == '\"' && pos2[-1] == '\"') ||
+ (*pos == '\'' && pos2[-1] == '\''))
+ {
+ pos++;
+ pos2--;
+
+ *pos2 = '\0';
+ }
asprintf (&os_string, " %s", pos);
}
goto out;
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(libply_splash_graphics_la_SOURCES)
DIST_SOURCES = $(libply_splash_graphics_la_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
HEADERS = $(libply_splash_graphics_HEADERS)
ETAGS = etags
CTAGS = ctags
$(am__aclocal_m4_deps):
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
}
-rm -rf .libs _libs
install-libply_splash_graphicsHEADERS: $(libply_splash_graphics_HEADERS)
@$(NORMAL_INSTALL)
+ test -z "$(libply_splash_graphicsdir)" || $(MKDIR_P) "$(DESTDIR)$(libply_splash_graphicsdir)"
@list='$(libply_splash_graphics_HEADERS)'; test -n "$(libply_splash_graphicsdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(libply_splash_graphicsdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(libply_splash_graphicsdir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
uint32_t stop_requested : 1;
};
+static void ply_animation_stop_now (ply_animation_t *animation);
+
+
ply_animation_t *
ply_animation_new (const char *image_dir,
const char *frames_prefix)
if (animation == NULL)
return;
+ if (!animation->is_stopped)
+ ply_animation_stop_now (animation);
+
ply_animation_remove_frames (animation);
ply_array_free (animation->frames);
uint32_t is_stopped : 1;
};
+static void ply_throbber_stop_now (ply_throbber_t *throbber);
+
ply_throbber_t *
ply_throbber_new (const char *image_dir,
const char *frames_prefix)
if (throbber == NULL)
return;
+ if (!throbber->is_stopped)
+ ply_throbber_stop_now (throbber);
+
ply_throbber_remove_frames (throbber);
ply_array_free (throbber->frames);
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
HEADERS = $(libply_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
$(am__aclocal_m4_deps):
install-libraryLTLIBRARIES: $(library_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(librarydir)" || $(MKDIR_P) "$(DESTDIR)$(librarydir)"
@list='$(library_LTLIBRARIES)'; test -n "$(librarydir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(librarydir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(librarydir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(librarydir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(librarydir)"; \
}
-rm -rf .libs _libs
install-libplyHEADERS: $(libply_HEADERS)
@$(NORMAL_INSTALL)
+ test -z "$(libplydir)" || $(MKDIR_P) "$(DESTDIR)$(libplydir)"
@list='$(libply_HEADERS)'; test -n "$(libplydir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(libplydir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(libplydir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__tty_colors = \
red=; grn=; lgn=; blu=; std=
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
if (stream != NULL)
{
char *end;
+ char *stream_copy;
- stream = strdup (stream);
- end = stream + strcspn (stream, " \n");
+ stream_copy = strdup (stream);
+ end = stream_copy + strcspn (stream_copy, " \n");
*end = '\0';
- ply_trace ("streaming debug output to %s instead of screen", stream);
- fd = open (stream, O_RDWR | O_NOCTTY | O_CREAT, 0600);
+ ply_trace ("streaming debug output to %s instead of screen", stream_copy);
+ fd = open (stream_copy, O_RDWR | O_NOCTTY | O_CREAT, 0600);
if (fd < 0)
{
- ply_trace ("could not stream output to %s: %m", stream);
+ ply_trace ("could not stream output to %s: %m", stream_copy);
}
else
{
ply_logger_set_output_fd (ply_logger_get_error_default (), fd);
}
- free (stream);
+ free (stream_copy);
}
}
else
*/
argv[0][0] = '@';
+ state.boot_server = start_boot_server (&state);
+
+ if (state.boot_server == NULL)
+ {
+ ply_trace ("plymouthd is already running");
+
+ if (daemon_handle != NULL)
+ ply_detach_daemon (daemon_handle, EX_OK);
+ return EX_OK;
+ }
+
state.boot_buffer = ply_buffer_new ();
if (attach_to_session)
}
}
- state.boot_server = start_boot_server (&state);
-
- if (state.boot_server == NULL)
- {
- ply_trace ("could not log bootup: %m");
-
- detach_from_running_session (&state);
-
- if (daemon_handle != NULL)
- ply_detach_daemon (daemon_handle, EX_UNAVAILABLE);
- return EX_UNAVAILABLE;
- }
-
state.progress = ply_progress_new ();
ply_progress_load_cache (state.progress,
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(label_la_SOURCES)
DIST_SOURCES = $(label_la_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
$(am__aclocal_m4_deps):
install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)"
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(plugindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plugindir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \
}
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(drm_la_SOURCES)
DIST_SOURCES = $(am__drm_la_SOURCES_DIST)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
$(am__aclocal_m4_deps):
install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)"
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(plugindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plugindir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \
}
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(frame_buffer_la_SOURCES)
DIST_SOURCES = $(frame_buffer_la_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
$(am__aclocal_m4_deps):
install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)"
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(plugindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plugindir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \
}
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(x11_la_SOURCES)
DIST_SOURCES = $(am__x11_la_SOURCES_DIST)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
$(am__aclocal_m4_deps):
install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)"
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(plugindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plugindir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \
}
GtkWidget *window;
GdkPixmap *pixmap;
cairo_surface_t *image;
+ uint32_t is_fullscreen : 1;
};
struct _ply_renderer_input_source
return;
}
+static void
+create_fake_multi_head_setup (ply_renderer_backend_t *backend)
+{
+ ply_renderer_head_t *head;
+
+ head = calloc (1, sizeof (ply_renderer_head_t));
+
+ head->backend = backend;
+ head->area.x = 0;
+ head->area.y = 0;
+ head->area.width = 800; /* FIXME hardcoded */
+ head->area.height = 600;
+ head->pixmap = gdk_pixmap_new (NULL,
+ head->area.width,
+ head->area.height,
+ 24);
+ head->pixel_buffer = ply_pixel_buffer_new (head->area.width, head->area.height);
+
+ ply_list_append_data (backend->heads, head);
+
+ head = calloc (1, sizeof (ply_renderer_head_t));
+
+ head->backend = backend;
+ head->area.x = 800;
+ head->area.y = 0;
+ head->area.width = 640; /* FIXME hardcoded */
+ head->area.height = 480;
+ head->pixmap = gdk_pixmap_new (NULL,
+ head->area.width,
+ head->area.height,
+ 24);
+ head->pixel_buffer = ply_pixel_buffer_new (head->area.width, head->area.height);
+
+ ply_list_append_data (backend->heads, head);
+}
+
+static void
+create_fullscreen_single_head_setup (ply_renderer_backend_t *backend)
+{
+ ply_renderer_head_t *head;
+ GdkRectangle monitor_geometry;
+
+ gdk_screen_get_monitor_geometry (gdk_screen_get_default (), 0, &monitor_geometry);
+
+ head = calloc (1, sizeof (ply_renderer_head_t));
+
+ head->backend = backend;
+ head->area.x = monitor_geometry.x;
+ head->area.y = monitor_geometry.y;
+ head->area.width = monitor_geometry.width;
+ head->area.height = monitor_geometry.height;
+ head->is_fullscreen = true;
+ head->pixmap = gdk_pixmap_new (NULL,
+ head->area.width,
+ head->area.height,
+ 24);
+ head->pixel_buffer = ply_pixel_buffer_new (head->area.width, head->area.height);
+
+ ply_list_append_data (backend->heads, head);
+}
+
static bool
query_device (ply_renderer_backend_t *backend)
{
- ply_renderer_head_t *head;
assert (backend != NULL);
if (ply_list_get_first_node (backend->heads) == NULL)
{
- head = calloc (1, sizeof (ply_renderer_head_t));
-
- head->backend = backend;
- head->area.x = 0;
- head->area.y = 0;
- head->area.width = 800; /* FIXME hardcoded */
- head->area.height = 600;
- head->pixmap = gdk_pixmap_new (NULL,
- head->area.width,
- head->area.height,
- 24);
- head->pixel_buffer = ply_pixel_buffer_new (head->area.width, head->area.height);
-
- ply_list_append_data (backend->heads, head);
-
- head = calloc (1, sizeof (ply_renderer_head_t));
-
- head->backend = backend;
- head->area.x = 800;
- head->area.y = 0;
- head->area.width = 640; /* FIXME hardcoded */
- head->area.height = 480;
- head->pixmap = gdk_pixmap_new (NULL,
- head->area.width,
- head->area.height,
- 24);
- head->pixel_buffer = ply_pixel_buffer_new (head->area.width, head->area.height);
-
- ply_list_append_data (backend->heads, head);
+ if (getenv ("PLY_CREATE_FAKE_MULTI_HEAD_SETUP") != NULL)
+ create_fake_multi_head_setup (backend);
+ else
+ create_fullscreen_single_head_setup (backend);
}
return true;
head = (ply_renderer_head_t *) ply_list_node_get_data (node);
next_node = ply_list_get_next_node (backend->heads, node);
- head->window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
- gtk_window_set_resizable (GTK_WINDOW (head->window), FALSE);
- gtk_widget_set_size_request (head->window,
- head->area.width,
- head->area.height);
- shadow_buffer = ply_pixel_buffer_get_argb32_data (head->pixel_buffer);
- head->image = cairo_image_surface_create_for_data ((unsigned char *) shadow_buffer,
- CAIRO_FORMAT_ARGB32,
- head->area.width, head->area.height,
- head->area.width * 4);
- gtk_widget_set_app_paintable (head->window, TRUE);
- gtk_widget_show_all (head->window);
- gdk_window_set_back_pixmap (head->window->window, head->pixmap, FALSE);
- gdk_window_set_decorations (head->window->window, GDK_DECOR_BORDER);
- gtk_window_move (GTK_WINDOW (head->window), head->area.x, head->area.y);
-
- gtk_widget_add_events (head->window, GDK_BUTTON1_MOTION_MASK);
-
- g_signal_connect (head->window, "motion-notify-event",
- G_CALLBACK (on_motion_notify_event),
- head);
- g_signal_connect (head->window, "key-press-event",
- G_CALLBACK (on_key_event),
- &backend->input_source);
- g_signal_connect (head->window, "delete-event",
- G_CALLBACK (on_window_destroy),
- NULL);
-
+ if (head->window == NULL)
+ {
+ head->window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
+ gtk_window_set_resizable (GTK_WINDOW (head->window), FALSE);
+ gtk_widget_set_size_request (head->window,
+ head->area.width,
+ head->area.height);
+ shadow_buffer = ply_pixel_buffer_get_argb32_data (head->pixel_buffer);
+ head->image = cairo_image_surface_create_for_data ((unsigned char *) shadow_buffer,
+ CAIRO_FORMAT_ARGB32,
+ head->area.width, head->area.height,
+ head->area.width * 4);
+ gtk_widget_set_app_paintable (head->window, TRUE);
+ gtk_widget_show_all (head->window);
+ gdk_window_set_back_pixmap (head->window->window, head->pixmap, FALSE);
+ gdk_window_set_decorations (head->window->window, GDK_DECOR_BORDER);
+ gtk_window_move (GTK_WINDOW (head->window), head->area.x, head->area.y);
+
+ gtk_window_set_type_hint (GTK_WINDOW (head->window), GDK_WINDOW_TYPE_HINT_DOCK);
+
+ if (head->is_fullscreen)
+ gtk_window_fullscreen (GTK_WINDOW (head->window));
+
+ gtk_widget_add_events (head->window, GDK_BUTTON1_MOTION_MASK);
+
+ g_signal_connect (head->window, "motion-notify-event",
+ G_CALLBACK (on_motion_notify_event),
+ head);
+ g_signal_connect (head->window, "key-press-event",
+ G_CALLBACK (on_key_event),
+ &backend->input_source);
+ g_signal_connect (head->window, "delete-event",
+ G_CALLBACK (on_window_destroy),
+ NULL);
+ }
ply_renderer_head_redraw (backend, head);
node = next_node;
}
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(details_la_SOURCES)
DIST_SOURCES = $(details_la_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
$(am__aclocal_m4_deps):
install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)"
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(plugindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plugindir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \
}
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(fade_throbber_la_SOURCES)
DIST_SOURCES = $(fade_throbber_la_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
$(am__aclocal_m4_deps):
install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)"
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(plugindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plugindir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \
}
view->label = ply_label_new ();
view->message_label = ply_label_new ();
- ply_label_set_text (view->message_label, "");
- ply_label_show (view->message_label, view->display, 10, 10);
return view;
}
view = ply_list_node_get_data (node);
next_node = ply_list_get_next_node (plugin->views, node);
ply_label_set_text (view->message_label, message);
+ ply_label_show (view->message_label, view->display, 10, 10);
+
ply_pixel_display_draw_area (view->display, 10, 10,
ply_label_get_width (view->message_label),
ply_label_get_height(view->message_label));
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(script_la_SOURCES)
DIST_SOURCES = $(script_la_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
$(am__aclocal_m4_deps):
install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)"
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(plugindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plugindir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \
}
#include "ply-label.h"
#include "ply-pixel-buffer.h"
#include "ply-utils.h"
+#include "ply-logger.h"
#include "script.h"
#include "script-parse.h"
#include "script-object.h"
script_lib_image_data_t *data = user_data;
ply_pixel_buffer_t *image;
ply_label_t *label;
- script_obj_t *alpha_obj, *font_obj;
+ script_obj_t *alpha_obj, *font_obj, *align_obj;
int width, height;
+ int align = PLY_LABEL_ALIGN_LEFT;
char *font;
char *text = script_obj_hash_get_string (state->local, "text");
script_obj_unref(font_obj);
+ align_obj = script_obj_hash_peek_element(state->local, "align");
+
+ if (script_obj_is_string(align_obj)) {
+ char *align_str = script_obj_as_string(align_obj);
+
+ if(!strcmp("left", align_str))
+ align = PLY_LABEL_ALIGN_LEFT;
+ else if(!strcmp("center", align_str))
+ align = PLY_LABEL_ALIGN_CENTER;
+ else if(!strcmp("right", align_str))
+ align = PLY_LABEL_ALIGN_RIGHT;
+ else
+ ply_error("Unrecognized Image.Text alignment string '%s'. "
+ "Expecting 'left', 'center', or 'right'\n",
+ align_str);
+ free(align_str);
+ }
+ script_obj_unref(align_obj);
+
if (!text) return script_return_obj_null ();
label = ply_label_new ();
ply_label_set_text (label, text);
if (font)
ply_label_set_font (label, font);
+ ply_label_set_alignment(label, align);
ply_label_set_color (label, red, green, blue, alpha);
ply_label_show (label, NULL, 0, 0);
"blue",
"alpha",
"font",
+ "align",
NULL);
script_obj_unref (image_hash);
return Image.Adopt (this._Scale(width, height));
};
-Image.Text = fun (text, red, green, blue, alpha, font)
+Image.Text = fun (text, red, green, blue, alpha, font, align)
{
- return Image.Adopt (Image._Text (text, red, green, blue, alpha, font));
+ return Image.Adopt (Image._Text (text, red, green, blue, alpha, font, align));
};
Image |= fun (filename)
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(space_flares_la_SOURCES)
DIST_SOURCES = $(space_flares_la_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
$(am__aclocal_m4_deps):
install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)"
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(plugindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plugindir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \
}
view->entry = ply_entry_new (plugin->image_dir);
view->label = ply_label_new ();
view->message_label = ply_label_new ();
- ply_label_set_text (view->message_label, "");
- ply_label_show (view->message_label, view->display, 10, 10);
view->sprites = ply_list_new ();
view = ply_list_node_get_data (node);
next_node = ply_list_get_next_node (plugin->views, node);
ply_label_set_text (view->message_label, message);
+ ply_label_show (view->message_label, view->display, 10, 10);
+
ply_pixel_display_draw_area (view->display, 10, 10,
ply_label_get_width (view->message_label),
ply_label_get_height(view->message_label));
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(text_la_SOURCES)
DIST_SOURCES = $(text_la_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
$(am__aclocal_m4_deps):
install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)"
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(plugindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plugindir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \
}
#include <linux/kd.h>
-#define CLEAR_LINE_SEQUENCE "\033[2K\r\n"
-#define BACKSPACE "\b\033[0K"
-
typedef enum {
PLY_BOOT_SPLASH_DISPLAY_NORMAL,
PLY_BOOT_SPLASH_DISPLAY_QUESTION_ENTRY,
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(throbgress_la_SOURCES)
DIST_SOURCES = $(throbgress_la_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
$(am__aclocal_m4_deps):
install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)"
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(plugindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plugindir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \
}
uint32_t root_is_mounted : 1;
uint32_t is_visible : 1;
uint32_t is_animating : 1;
+ uint32_t is_idle : 1;
};
ply_boot_splash_plugin_interface_t * ply_boot_splash_plugin_get_interface (void);
static void detach_from_event_loop (ply_boot_splash_plugin_t *plugin);
+static void become_idle (ply_boot_splash_plugin_t *plugin,
+ ply_trigger_t *idle_trigger);
+
static view_t *
view_new (ply_boot_splash_plugin_t *plugin,
ply_pixel_display_t *display)
view->progress_bar = ply_progress_bar_new ();
view->label = ply_label_new ();
view->message_label = ply_label_new ();
- ply_label_set_text (view->message_label, "");
- ply_label_show (view->message_label, view->display, 10, 10);
return view;
}
if (plugin->mode == PLY_BOOT_SPLASH_MODE_SHUTDOWN)
return;
+ plugin->is_idle = false;
+
width = ply_throbber_get_width (view->throbber);
height = ply_throbber_get_height (view->throbber);
ply_throbber_start (view->throbber,
}
plugin->is_animating = true;
+
+ if (plugin->mode == PLY_BOOT_SPLASH_MODE_SHUTDOWN)
+ plugin->is_idle = true;
}
static void
ply_list_node_t *node;
double total_duration;
+ if (plugin->mode == PLY_BOOT_SPLASH_MODE_UPDATES)
+ return;
+
total_duration = duration / percent_done;
/* Fun made-up smoothing function to make the growth asymptotic:
become_idle (ply_boot_splash_plugin_t *plugin,
ply_trigger_t *idle_trigger)
{
+ if (plugin->is_idle)
+ {
+ ply_trigger_pull (idle_trigger, NULL);
+ return;
+ }
+
stop_animation (plugin, idle_trigger);
+ plugin->is_idle = true;
}
static void
view = ply_list_node_get_data (node);
next_node = ply_list_get_next_node (plugin->views, node);
ply_label_set_text (view->message_label, message);
+ ply_label_show (view->message_label, view->display, 10, 10);
+
ply_pixel_display_draw_area (view->display, 10, 10,
ply_label_get_width (view->message_label),
ply_label_get_height(view->message_label));
show_message (plugin, message);
}
+static void
+system_update (ply_boot_splash_plugin_t *plugin,
+ int progress)
+{
+ ply_list_node_t *node;
+
+ if (plugin->mode != PLY_BOOT_SPLASH_MODE_UPDATES)
+ return;
+
+ node = ply_list_get_first_node (plugin->views);
+ while (node != NULL)
+ {
+ ply_list_node_t *next_node;
+ view_t *view;
+
+ view = ply_list_node_get_data (node);
+ next_node = ply_list_get_next_node (plugin->views, node);
+ ply_progress_bar_set_percent_done (view->progress_bar, (double) progress / 100.f);
+ ply_progress_bar_draw (view->progress_bar);
+ node = next_node;
+ }
+}
+
ply_boot_splash_plugin_interface_t *
ply_boot_splash_plugin_get_interface (void)
{
.display_password = display_password,
.display_question = display_question,
.display_message = display_message,
+ .system_update = system_update,
};
return &plugin_interface;
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(two_step_la_SOURCES)
DIST_SOURCES = $(two_step_la_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
$(am__aclocal_m4_deps):
install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES)
@$(NORMAL_INSTALL)
+ test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)"
@list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(plugindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plugindir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \
}
view->label = ply_label_new ();
view->message_label = ply_label_new ();
- ply_label_set_text (view->message_label, "");
- ply_label_show (view->message_label, view->display, 10, 10);
return view;
}
next_node = ply_list_get_next_node (plugin->views, node);
ply_label_set_text (view->message_label, message);
+ ply_label_show (view->message_label, view->display, 10, 10);
ply_pixel_display_draw_area (view->display, 10, 10,
ply_label_get_width (view->message_label),
# Distribution defaults. Changes to this file will get overwritten during
# upgrades.
[Daemon]
-Theme=fade-in
+Theme=spinner
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__tty_colors = \
red=; grn=; lgn=; blu=; std=
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(plymouth_upstart_bridge_SOURCES)
DIST_SOURCES = $(plymouth_upstart_bridge_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
$(am__aclocal_m4_deps):
install-plymouthPROGRAMS: $(plymouth_PROGRAMS)
@$(NORMAL_INSTALL)
+ test -z "$(plymouthdir)" || $(MKDIR_P) "$(DESTDIR)$(plymouthdir)"
@list='$(plymouth_PROGRAMS)'; test -n "$(plymouthdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(plymouthdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plymouthdir)" || exit 1; \
- fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p || test -f $$p1; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
$(am__aclocal_m4_deps):
install-plymouth_log_viewerPROGRAMS: $(plymouth_log_viewer_PROGRAMS)
@$(NORMAL_INSTALL)
+ test -z "$(plymouth_log_viewerdir)" || $(MKDIR_P) "$(DESTDIR)$(plymouth_log_viewerdir)"
@list='$(plymouth_log_viewer_PROGRAMS)'; test -n "$(plymouth_log_viewerdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(plymouth_log_viewerdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(plymouth_log_viewerdir)" || exit 1; \
- fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p || test -f $$p1; \
-rm -rf .libs _libs
install-gdmautostartDATA: $(gdmautostart_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(gdmautostartdir)" || $(MKDIR_P) "$(DESTDIR)$(gdmautostartdir)"
@list='$(gdmautostart_DATA)'; test -n "$(gdmautostartdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(gdmautostartdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(gdmautostartdir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
systemd_unit_templates = \
+ plymouth-switch-root.service.in \
plymouth-start.service.in \
plymouth-read-write.service.in \
plymouth-quit.service.in \
if ENABLE_SYSTEMD_INTEGRATION
systemdunitdir=$(SYSTEMD_UNIT_DIR)
systemdunit_DATA = $(systemd_unit_templates:.in=)
+
+install-data-hook:
+ $(MKDIR_P) -m 0755 \
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/initrd-switch-root.target.wants\
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/sysinit.target.wants \
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/multi-user.target.wants \
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/reboot.target.wants \
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/kexec.target.wants \
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/poweroff.target.wants \
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/halt.target.wants
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/initrd-switch-root.target.wants && \
+ rm -f plymouth-switch-root.service && \
+ $(LN_S) ../plymouth-switch-root.service)
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/sysinit.target.wants && \
+ rm -f plymouth-start.service plymouth-read-write.service && \
+ $(LN_S) ../plymouth-start.service && \
+ $(LN_S) ../plymouth-read-write.service)
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/multi-user.target.wants && \
+ rm -f plymouth-quit.service plymouth-quit-wait.service && \
+ $(LN_S) ../plymouth-quit.service && \
+ $(LN_S) ../plymouth-quit-wait.service)
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/reboot.target.wants && \
+ rm -f plymouth-reboot.service && \
+ $(LN_S) ../plymouth-reboot.service)
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/kexec.target.wants && \
+ rm -f plymouth-kexec.service && \
+ $(LN_S) ../plymouth-kexec.service)
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/poweroff.target.wants && \
+ rm -f plymouth-poweroff.service && \
+ $(LN_S) ../plymouth-poweroff.service)
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/halt.target.wants && \
+ rm -f plymouth-halt.service && \
+ $(LN_S) ../plymouth-halt.service)
+
+uninstall-hook:
+ rm -f \
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/initrd-switch-root.target.wants && \
+ rm -f plymouth-switch-root.service) \
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/sysinit.target.wants && \
+ rm -f plymouth-start.service plymouth-read-write.service) \
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/multi-user.target.wants && \
+ rm -f plymouth-quit.service plymouth-quit-wait.service) \
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/reboot.target.wants && \
+ rm -f plymouth-reboot.service) \
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/kexec.target.wants && \
+ rm -f plymouth-kexec.service) \
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/poweroff.target.wants && \
+ rm -f plymouth-poweroff.service) \
+ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/halt.target.wants && \
+ rm -f plymouth-halt.service) \
+ rmdir --ignore-fail-on-non-empty \
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/sysinit.target.wants \
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/multi-user.target.wants \
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/reboot.target.wants \
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/kexec.target.wants \
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/poweroff.target.wants \
+ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/halt.target.wants
+
endif
EXTRA_DIST = $(systemd_unit_templates) $(systemdunit_DATA)
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
$(srcdir)/plymouth-read-write.service.in \
$(srcdir)/plymouth-reboot.service.in \
$(srcdir)/plymouth-start.service.in \
+ $(srcdir)/plymouth-switch-root.service.in \
$(srcdir)/systemd-ask-password-plymouth.path.in \
$(srcdir)/systemd-ask-password-plymouth.service.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
plymouth-poweroff.service plymouth-quit.service \
plymouth-quit-wait.service plymouth-read-write.service \
plymouth-reboot.service plymouth-start.service \
+ plymouth-switch-root.service \
systemd-ask-password-plymouth.path \
systemd-ask-password-plymouth.service
CONFIG_CLEAN_VPATH_FILES =
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
systemd_unit_templates = \
+ plymouth-switch-root.service.in \
plymouth-start.service.in \
plymouth-read-write.service.in \
plymouth-quit.service.in \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
plymouth-start.service: $(top_builddir)/config.status $(srcdir)/plymouth-start.service.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+plymouth-switch-root.service: $(top_builddir)/config.status $(srcdir)/plymouth-switch-root.service.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
systemd-ask-password-plymouth.path: $(top_builddir)/config.status $(srcdir)/systemd-ask-password-plymouth.path.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
systemd-ask-password-plymouth.service: $(top_builddir)/config.status $(srcdir)/systemd-ask-password-plymouth.service.in
-rm -rf .libs _libs
install-systemdunitDATA: $(systemdunit_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(systemdunitdir)" || $(MKDIR_P) "$(DESTDIR)$(systemdunitdir)"
@list='$(systemdunit_DATA)'; test -n "$(systemdunitdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(systemdunitdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(systemdunitdir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
+@ENABLE_SYSTEMD_INTEGRATION_FALSE@install-data-hook:
+@ENABLE_SYSTEMD_INTEGRATION_FALSE@uninstall-hook:
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
info-am:
install-data-am: install-systemdunitDATA
-
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-am
install-dvi-am:
ps-am:
uninstall-am: uninstall-systemdunitDATA
-
-.MAKE: install-am install-strip
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
+.MAKE: install-am install-data-am install-strip uninstall-am
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- install-systemdunitDATA installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
- ps ps-am uninstall uninstall-am uninstall-systemdunitDATA
-
+ install-data install-data-am install-data-hook install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip install-systemdunitDATA installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+ uninstall-hook uninstall-systemdunitDATA
+
+
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@install-data-hook:
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(MKDIR_P) -m 0755 \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/initrd-switch-root.target.wants\
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/sysinit.target.wants \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/multi-user.target.wants \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/reboot.target.wants \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/kexec.target.wants \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/poweroff.target.wants \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/halt.target.wants
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/initrd-switch-root.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-switch-root.service && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(LN_S) ../plymouth-switch-root.service)
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/sysinit.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-start.service plymouth-read-write.service && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(LN_S) ../plymouth-start.service && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(LN_S) ../plymouth-read-write.service)
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/multi-user.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-quit.service plymouth-quit-wait.service && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(LN_S) ../plymouth-quit.service && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(LN_S) ../plymouth-quit-wait.service)
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/reboot.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-reboot.service && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(LN_S) ../plymouth-reboot.service)
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/kexec.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-kexec.service && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(LN_S) ../plymouth-kexec.service)
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/poweroff.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-poweroff.service && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(LN_S) ../plymouth-poweroff.service)
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/halt.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-halt.service && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(LN_S) ../plymouth-halt.service)
+
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@uninstall-hook:
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/initrd-switch-root.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-switch-root.service) \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/sysinit.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-start.service plymouth-read-write.service) \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/multi-user.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-quit.service plymouth-quit-wait.service) \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/reboot.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-reboot.service) \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/kexec.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-kexec.service) \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/poweroff.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-poweroff.service) \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ (cd $(DESTDIR)$(SYSTEMD_UNIT_DIR)/halt.target.wants && \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rm -f plymouth-halt.service) \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ rmdir --ignore-fail-on-non-empty \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/sysinit.target.wants \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/multi-user.target.wants \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/reboot.target.wants \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/kexec.target.wants \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/poweroff.target.wants \
+@ENABLE_SYSTEMD_INTEGRATION_TRUE@ $(DESTDIR)$(SYSTEMD_UNIT_DIR)/halt.target.wants
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
+++ /dev/null
-[Unit]
-Description=Show Plymouth Halt Screen
-After=getty@tty1.service prefdm.service plymouth-start.service
-Before=halt.service
-DefaultDependencies=no
-ConditionKernelCommandLine=!plymouth.enable=0
-
-[Service]
-ExecStart=/sbin/plymouthd --mode=shutdown --attach-to-session
-ExecStartPost=-/bin/plymouth show-splash
-Type=forking
+++ /dev/null
-[Unit]
-Description=Show Plymouth Reboot with kexec Screen
-After=getty@tty1.service prefdm.service plymouth-start.service
-Before=kexec.service
-DefaultDependencies=no
-ConditionKernelCommandLine=!plymouth.enable=0
-
-[Service]
-ExecStart=/sbin/plymouthd --mode=shutdown --attach-to-session
-ExecStartPost=-/bin/plymouth show-splash
-Type=forking
+++ /dev/null
-[Unit]
-Description=Show Plymouth Power Off Screen
-After=getty@tty1.service prefdm.service plymouth-start.service
-Before=poweroff.service
-DefaultDependencies=no
-ConditionKernelCommandLine=!plymouth.enable=0
-
-[Service]
-ExecStart=/sbin/plymouthd --mode=shutdown --attach-to-session
-ExecStartPost=-/bin/plymouth show-splash
-Type=forking
+++ /dev/null
-[Unit]
-Description=Wait for Plymouth Boot Screen to Quit
-After=rc-local.service plymouth-start.service systemd-user-sessions.service
-
-[Service]
-ExecStart=-/bin/plymouth --wait
-Type=oneshot
-TimeoutSec=20
+++ /dev/null
-[Unit]
-Description=Terminate Plymouth Boot Screen
-After=rc-local.service plymouth-start.service systemd-user-sessions.service
-
-[Service]
-ExecStart=-/bin/plymouth quit
-Type=oneshot
-TimeoutSec=20
+++ /dev/null
-[Unit]
-Description=Tell Plymouth To Write Out Runtime Data
-DefaultDependencies=no
-After=local-fs.target
-Before=sysinit.target
-
-[Service]
-ExecStart=-/bin/plymouth update-root-fs --read-write
-Type=oneshot
DefaultDependencies=no
After=local-fs.target
Before=sysinit.target
+ConditionPathExists=!/etc/initrd-release
[Service]
ExecStart=-@PLYMOUTH_CLIENT_DIR@/plymouth update-root-fs --read-write
+++ /dev/null
-[Unit]
-Description=Show Plymouth Reboot Screen
-After=getty@tty1.service prefdm.service plymouth-start.service
-Before=reboot.service
-DefaultDependencies=no
-ConditionKernelCommandLine=!plymouth.enable=0
-
-[Service]
-ExecStart=/sbin/plymouthd --mode=shutdown --attach-to-session
-ExecStartPost=-/bin/plymouth show-splash
-Type=forking
+++ /dev/null
-[Unit]
-Description=Show Plymouth Boot Screen
-DefaultDependencies=no
-Wants=systemd-ask-password-plymouth.path
-After=systemd-vconsole-setup.service systemd-udev-settle.service
-Before=systemd-ask-password-plymouth.service
-ConditionKernelCommandLine=!plymouth.enable=0
-ConditionPathExists=!/run/plymouth/pid
-
-[Service]
-ExecStart=/sbin/plymouthd --mode=boot --pid-file=/run/plymouth/pid --attach-to-session
-ExecStartPost=-/bin/udevadm settle --timeout=30 --exit-if-exists=/sys/class/drm/card0/dev;-/bin/udevadm settle --timeout=30 --exit-if-exists=/sys/class/graphics/fb0/dev; -/bin/plymouth show-splash
-Type=forking
Description=Show Plymouth Boot Screen
DefaultDependencies=no
Wants=systemd-ask-password-plymouth.path
-After=systemd-vconsole-setup.service systemd-udev-settle.service
+After=systemd-vconsole-setup.service systemd-udev-trigger.service
Before=systemd-ask-password-plymouth.service
ConditionKernelCommandLine=!plymouth.enable=0
-ConditionPathExists=!@plymouthruntimedir@/pid
[Service]
ExecStart=@PLYMOUTH_DAEMON_DIR@/plymouthd --mode=boot --pid-file=@plymouthruntimedir@/pid --attach-to-session
-ExecStartPost=-/bin/udevadm settle --timeout=30 --exit-if-exists=/sys/class/drm/card0/dev;-/bin/udevadm settle --timeout=30 --exit-if-exists=/sys/class/graphics/fb0/dev; -@PLYMOUTH_CLIENT_DIR@/plymouth show-splash
+ExecStartPost=-/bin/udevadm settle --timeout=30 --exit-if-exists=/sys/class/drm/card0/dev ; /bin/udevadm settle --timeout=30 --exit-if-exists=/sys/class/graphics/fb0/dev ; @PLYMOUTH_CLIENT_DIR@/plymouth show-splash
Type=forking
+KillMode=none
+SendSIGKILL=no
--- /dev/null
+[Unit]
+Description=Plymouth switch root service
+DefaultDependencies=no
+ConditionPathExists=/etc/initrd-release
+Before=initrd-switch-root.service
+
+[Service]
+Type=oneshot
+ExecStart=-@PLYMOUTH_CLIENT_DIR@/plymouth update-root-fs --new-root-dir=/sysroot
+StandardInput=null
+StandardOutput=null
+StandardError=null
+++ /dev/null
-[Unit]
-Description=Forward Password Requests to Plymouth Directory Watch
-Documentation=http://www.freedesktop.org/wiki/Software/systemd/PasswordAgents
-DefaultDependencies=no
-Conflicts=shutdown.target
-After=plymouth-start.service
-Before=basic.target shutdown.target
-ConditionKernelCommandLine=!plymouth.enable=0
-ConditionPathExists=/run/plymouth/pid
-
-[Path]
-DirectoryNotEmpty=/run/systemd/ask-password
-MakeDirectory=yes
+++ /dev/null
-[Unit]
-Description=Forward Password Requests to Plymouth
-Documentation=http://www.freedesktop.org/wiki/Software/systemd/PasswordAgents
-DefaultDependencies=no
-Conflicts=shutdown.target
-After=plymouth-start.service
-Before=shutdown.target
-ConditionKernelCommandLine=!plymouth.enable=0
-ConditionPathExists=/run/plymouth/pid
-
-[Service]
-ExecStart=/bin/systemd-tty-ask-password-agent --watch --plymouth
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-rm -rf .libs _libs
install-dist_themeDATA: $(dist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(dist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-rm -rf .libs _libs
install-dist_themeDATA: $(dist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(dist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
dir='$(DESTDIR)$(themedir)'; $(am__uninstall_files_from_dir)
install-nodist_themeDATA: $(nodist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(nodist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-rm -rf .libs _libs
install-dist_themeDATA: $(dist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(dist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
dir='$(DESTDIR)$(themedir)'; $(am__uninstall_files_from_dir)
install-nodist_themeDATA: $(nodist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(nodist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-rm -rf .libs _libs
install-dist_themeDATA: $(dist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(dist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
dir='$(DESTDIR)$(themedir)'; $(am__uninstall_files_from_dir)
install-nodist_themeDATA: $(nodist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(nodist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-rm -rf .libs _libs
install-dist_themeDATA: $(dist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(dist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
dir='$(DESTDIR)$(themedir)'; $(am__uninstall_files_from_dir)
install-nodist_themeDATA: $(nodist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(nodist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-rm -rf .libs _libs
install-dist_themeDATA: $(dist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(dist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
dir='$(DESTDIR)$(themedir)'; $(am__uninstall_files_from_dir)
install-nodist_themeDATA: $(nodist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(nodist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-rm -rf .libs _libs
install-dist_themeDATA: $(dist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(dist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
dir='$(DESTDIR)$(themedir)'; $(am__uninstall_files_from_dir)
install-nodist_themeDATA: $(nodist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(nodist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-rm -rf .libs _libs
install-dist_themeDATA: $(dist_theme_DATA)
@$(NORMAL_INSTALL)
+ test -z "$(themedir)" || $(MKDIR_P) "$(DESTDIR)$(themedir)"
@list='$(dist_theme_DATA)'; test -n "$(themedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \
- fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \