+%define release_prefix 9
%define __strip /bin/true
%define _build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.vanish.rpm
# meta spec file for cross-chroot setup
#
# The original package name
+# e.g. qemu
+#
%define oldname zlib
#
# The architectures this meta package is built on
-%define myexclusive i586
+# e.g. i586
+#
+%define myexclusive i586 x86_64
#
# The required package for building this package
#
#Requires: <usuallyemptlylist>
+### no changes needed below this line
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+### no changes needed
+
# For a real accelerator, also the old packge is required for compatibility
# pls change this only if you know what you do
Requires: %oldname
#
# Release under which to put the accelerator
-# e.g. 1 or higher
#
-Release: 8
+Release: %release_prefix
-### no changes needed below this line
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-### no changes needed
#
-# The new package name - convention is %oldname-x86
-%define newname %{oldname}-x86
+# 64bit arch
+%ifarch x86_64
+%define x64 x64
+%endif
+#
+# The new package name - convention is %oldname-%{!?x64:x86}%{?x64}
+%define newname %{oldname}-%{!?x64:x86}%{?x64}
#
# The version of the original package is read from its rpm db info
%{expand:%%define newversion %(rpm -q --qf '[%{version}]' %oldname)}
%{expand:%%define newsummary %(rpm -q --qf '[%{summary} - special version ]' %oldname)}
#
# New rpath to add to files on request
-%define newrpath "/emul/ia32-linux/lib:/emul/ia32-linux/usr/lib"
-%define newinterpreter /emul/ia32-linux/lib/ld-linux.so.2
+%define newrpath "/emul/ia32-linux/%{_lib}:/emul/ia32-linux/usr/%{_lib}"
+%define newinterpreter /emul/ia32-linux/%{_lib}/ld-linux%{?x64:-x86-64}.so.2
#
# Some automatic checks for availability
# binaries_to_prepare
Original description:
%{expand:%(rpm -q --qf '[%{description}]' %oldname)}
-
%prep
%build
echo "s#^${i}\$##" >> $sedtmp
done
+# ignore directories
+for i in `cat filestoinclude1`; do
+ if test -d $i ; then
+ echo "s#^${i}\$##" >> $sedtmp
+ fi
+done
+
#finish up
echo "/^\$/d" >> $sedtmp
echo ""
echo "[ .oO Preparing binaries Oo. ]"
echo ""
+cat %{_sourcedir}/binaries_to_prepare | sed "s/@LIB@/%{_lib}/g" > binaries_to_prepare1
mkdir -p %buildroot/%{_prefix}/share/applybinary/
-for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do
+for binary in `cat binaries_to_prepare1` ; do
echo "Processing binary: $binary"
tmp="tmp.$$"
%if %nodebug
debug="--debug"
%endif
if file $binary | grep -q dynamic; then
- ldd $binary | grep -v "ld-linux" | grep -v "linux-gate" | sed -e "s#=.*##g" -e "s#^\t*##g" > $tmp
- deps=$(for i in `cat $tmp` ; do rpm -q --whatprovides "$i" | grep -v "no package"; done)
+ ldd $binary | grep -v "ld-linux" | grep -v "linux-gate" | grep -v "linux-vdso" | sed -e "s#=.*##g" -e "s#^\t*##g" > $tmp
+ deps=$(for i in `cat $tmp` ; do rpm -q --whatprovides "${i}%{?x64:()(64bit)}" | grep -v "no package"; done)
cleandeps=$(echo "$cleandeps" "$deps" | sort | uniq | sed -e "s/-[0-9].*//g")
patchelf $debug --set-rpath %newrpath %buildroot/$binary
patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary
- patchelf $debug --set-rpath %newrpath %buildroot/$binary
- patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary
if test -n "$debug"; then
patchelf --print-rpath %buildroot/$binary
patchelf --print-interpreter %buildroot/$binary
echo ""
echo "[ .oO Preparing libraries Oo. ]"
echo ""
+cat %{_sourcedir}/libraries_to_prepare | sed "s/@LIB@/%{_lib}/g" > libraries_to_prepare1
%endif
# stub
# automagically fill in basic requirements
for i in $cleandeps ; do
- shellquote " targettype arm requires \"${i}-x86-arm\"" >> /tmp/baselibs_new.conf
+ shellquote " targettype arm requires \"${i}-%{!?x64:x86}%{?x64}-arm\"" >> /tmp/baselibs_new.conf
done
# we require the native version
# replace native with x86 binaries as defined in file
%if %binaries_to_prepare
# Todo: error handling if .orig-arm is present
-for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do
+for binary in `cat binaries_to_prepare1` ; do
shellquote " targettype arm post \" if test -e ${binary}.orig-arm -a -h ${binary}; then \" " >> /tmp/baselibs_new.conf
shellquote " targettype arm post \" echo \"${binary}.orig-arm already present - skipping.\" \" " >> /tmp/baselibs_new.conf
shellquote " targettype arm post \" else \" " >> /tmp/baselibs_new.conf
done
shellquote " " >> /tmp/baselibs_new.conf
-for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do
+for binary in `cat binaries_to_prepare1` ; do
shellquote " targettype arm preun \" if test -e ${binary}.orig-arm ; then \"" >> /tmp/baselibs_new.conf
shellquote " targettype arm preun \" rm -f ${binary} ; mv ${binary}.orig-arm ${binary}\"" >> /tmp/baselibs_new.conf
done
%endif
+%if %libraries_to_prepare
+# Todo: error handling if .orig-arm is present
+for library in `cat libraries_to_prepare1` ; do
+ shellquote " targettype arm post \" if test -e ${library}.orig-arm -a -h ${library}; then \" " >> /tmp/baselibs_new.conf
+ shellquote " targettype arm post \" echo \"${library}.orig-arm already present - skipping.\" \" " >> /tmp/baselibs_new.conf
+ shellquote " targettype arm post \" else \" " >> /tmp/baselibs_new.conf
+ shellquote " targettype arm post \" mv ${library} ${library}.orig-arm ; ln -s <prefix>${library} ${library} \"" >> /tmp/baselibs_new.conf
+ shellquote " targettype arm post \" fi \" " >> /tmp/baselibs_new.conf
+done
+
+shellquote " " >> /tmp/baselibs_new.conf
+for library in `cat libraries_to_prepare1` ; do
+
+ shellquote " targettype arm preun \" if test -e ${library}.orig-arm ; then \"" >> /tmp/baselibs_new.conf
+ shellquote " targettype arm preun \" rm -f ${library} ; mv ${library}.orig-arm ${library}\"" >> /tmp/baselibs_new.conf
+ shellquote " targettype arm preun \" fi \"" >> /tmp/baselibs_new.conf
+
+done
+%endif
+
cat /tmp/baselibs_new.conf >> %{_sourcedir}/baselibs.conf
echo "################################################################################"
projects / toolchains / zlib-x86.git / commitdiff