+++ /dev/null
-#! /bin/sh
-
-srcdir=`dirname $0`
-test -z "$srcdir" && srcdir=.
-
-ORIGDIR=`pwd`
-cd $srcdir
-
-autoreconf -v --install || exit 1
-cd $ORIGDIR || exit $?
-
-#$srcdir/configure --enable-maintainer-mode "$@"
+++ /dev/null
-------------------------------------------------------
-Quick Guide To Patching This Package For The Impatient
-------------------------------------------------------
-
-1. Make sure you have quilt installed
-2. Unpack the package as usual with "dpkg-source -x"
-3. Run the "patch" target in debian/rules
-4. Create a new patch with "quilt new" (see quilt(1))
-5. Edit all the files you want to include in the patch with "quilt edit"
- (see quilt(1)).
-6. Write the patch with "quilt refresh" (see quilt(1))
-7. Run the "clean" target in debian/rules
-
-Alternatively, instead of using quilt directly, you can drop the patch in to
-debian/patches and add the name of the patch to debian/patches/series.
-
-------------------------------------
-Guide To The X Strike Force Packages
-------------------------------------
-
-The X Strike Force team maintains X packages in git repositories on
-git.debian.org in the pkg-xorg subdirectory. Most upstream packages
-are actually maintained in git repositories as well, so they often
-just need to be pulled into git.debian.org in a "upstream-*" branch.
-Otherwise, the upstream sources are manually installed in the Debian
-git repository.
-
-The .orig.tar.gz upstream source file could be generated using this
-"upstream-*" branch in the Debian git repository but it is actually
-copied from upstream tarballs directly.
-
-Due to X.org being highly modular, packaging all X.org applications
-as their own independent packages would have created too many Debian
-packages. For this reason, some X.org applications have been grouped
-into larger packages: xutils, xutils-dev, x11-apps, x11-session-utils,
-x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils.
-Most packages, including the X.org server itself and all libraries
-and drivers are, however maintained independently.
-
-The Debian packaging is added by creating the "debian-*" git branch
-which contains the aforementioned "upstream-*" branch plus the debian/
-repository files.
-When a patch has to be applied to the Debian package, two solutions
-are involved:
-* If the patch is available in one of the upstream branches, it
- may be git'cherry-picked into the Debian repository. In this
- case, it appears directly in the .diff.gz.
-* Otherwise, the patch is added to debian/patches/ which is managed
- with quilt as documented in /usr/share/doc/quilt/README.source.
-
-quilt is actually invoked by the Debian X packaging through a larger
-set of scripts called XSFBS. XSFBS brings some other X specific
-features such as managing dependencies and conflicts due to the video
-and input driver ABIs.
-XSFBS itself is maintained in a separate repository at
- git://git.debian.org/pkg-xorg/xsfbs.git
-and it is pulled inside the other Debian X repositories when needed.
-
-The XSFBS patching system requires a build dependency on quilt. Also
-a dependency on $(STAMP_DIR)/patch has to be added to debian/rules
-so that the XSFBS patching occurs before the actual build. So the
-very first target of the build (likely the one running autoreconf)
-should depend on $(STAMP_DIR)/patch. It should also not depend on
-anything so that parallel builds are correctly supported (nothing
-should probably run while patching is being done). And finally, the
-clean target should depend on the xsfclean target so that patches
-are unapplied on clean.
-
-When the upstream sources contain some DFSG-nonfree files, they are
-listed in text files in debian/prune/ in the "debian-*" branch of
-the Debian repository. XSFBS' scripts then take care of removing
-these listed files during the build so as to generate a modified
-DFSG-free .orig.tar.gz tarball.
+++ /dev/null
-libxcomposite (1:0.4.3-1slp2) unstable; urgency=low
-
- * [X11R7.6] upgrade package
- * Git: 165.213.180.234:slp/pkgs/xorg/lib/libxcomposite
- * Tag: libxcomposite_0.4.3-1slp2
-
- -- SooChan Lim <sc1.lim@samsung.com> Mon, 03 Jan 2011 23:01:21 +0900
-
-libxcomposite (1:0.4.2-1) unstable; urgency=low
-
- * New upstream release.
- * Update debian/copyright from upstream COPYING.
- * Bump xutils-dev build-dep for xorg-macros 1.6.
- * Drop pre-dependency on x11-common, only needed for upgrades from sarge.
- * Bump Standards-Version to 3.9.0.
-
- -- Julien Cristau <jcristau@debian.org> Sun, 11 Jul 2010 13:48:21 +0100
-
-libxcomposite (1:0.4.1-2) unstable; urgency=low
-
- [ Julien Cristau ]
- * Rename the build directory to not include DEB_BUILD_GNU_TYPE for no
- good reason. Thanks, Colin Watson!
- * Remove myself from Uploaders
-
- [ Brice Goglin ]
- * Remove Jamey Sharp and Josh Triplett from Uploaders, closes: #568280.
-
- -- Julien Cristau <jcristau@debian.org> Fri, 25 Jun 2010 20:27:02 +0100
-
-libxcomposite (1:0.4.1-1) unstable; urgency=low
-
-libxcomposite (1:0.4.1-6slp2+2) unstable; urgency=low
-
- * add --as-needed option
- * Git: 165.213.180.234:/git/slp/pkgs/xorg/lib/libxcomposite
- * Tag: libxcomposite_0.4.1-6slp2+2
-
- -- SooChan Lim <sc1.lim@samsung.com> Thu, 18 Nov 2010 15:12:18 +0900
-
-libxcomposite (1:0.4.1-6slp2+1) unstable; urgency=low
-
- * modify the package name
-
- -- SooChan Lim <sc1.lim@samsung.com> Thu, 25 Mar 2010 17:43:30 +0900
-
-libxcomposite (1:0.4.1-5) unstable; urgency=low
-
- * Add configure option to choose not/to use xmlto building docs
-
- -- Sung-Jin Park <sj76.park@samsung.com> Thu, 18 Feb 2010 00:01:41 +0900
-
-libxcomposite (1:0.4.1-4) unstable; urgency=low
-
- * Fix debian/rules not to delete ltmain.sh
-
- -- Sung-Jin Park <sj76.park@samsung.com> Tue, 29 Dec 2009 14:34:48 +0900
-
-libxcomposite (1:0.4.1-3) unstable; urgency=low
-
- * Install .la files
-
- -- Sung-Jin Park <sj76.park@samsung.com> Mon, 07 Dec 2009 10:30:52 +0900
-
-libxcomposite (1:0.4.1-2) unstable; urgency=low
-
- * Import debian package and update version not to make version problem
-
- -- Sung-Jin Park <sj76.park@samsung.com> Thu, 03 Dec 2009 15:11:58 +0900
-
- [ Timo Aaltonen ]
- * New upstream release (closes: #554236).
- * Bump Standards-Version to 3.8.3.
- * Run autoreconf on build. Add build-deps on automake, libtool and
- xutils-dev.
- * Parse space-separated DEB_BUILD_OPTIONS, and handle parallel=N.
-
- -- Julien Cristau <jcristau@debian.org> Wed, 25 Nov 2009 15:00:28 +0100
-
-libxcomposite (1:0.4.0-4) unstable; urgency=low
-
- * Add a link to www.X.org in the long description.
- * Add README.source, bump Standards-Version to 3.8.2.
- * Remove the unused quilt patching, closes: #538619.
- * Move -dbg package to new debug section.
- * Add myself to Uploaders.
-
- -- Brice Goglin <bgoglin@debian.org> Sun, 26 Jul 2009 12:13:14 +0200
-
-libxcomposite (1:0.4.0-3) unstable; urgency=low
-
- * Add dependency on x11proto-core-dev and libxext-dev to libxcomposite-dev,
- as these are referenced by xcomposite.pc.
-
- -- Julien Cristau <jcristau@debian.org> Fri, 30 May 2008 14:36:51 +0200
-
-libxcomposite (1:0.4.0-2) unstable; urgency=low
-
- [ Andres Salomon ]
- * Test for obj-$(DEB_BUILD_GNU_TYPE) before creating it during build;
- idempotency fix.
- * Run dh_install w/ --list-missing.
- * Bump debhelper compat to 5.
- * Fix dh_strip call to skip the -dbg package.
-
- [ Julien Cristau ]
- * Drop the -1 debian revision from the libx11-dev build-dep.
- * Bump Standards-Version to 3.7.3.
- * Drop the XS- prefix from Vcs-* control fields.
- * libxcomposite1{,-dbg} don't need to depend on x11-common.
-
- -- Julien Cristau <jcristau@debian.org> Sun, 18 May 2008 23:55:39 +0200
-
-libxcomposite (1:0.4.0-1) unstable; urgency=low
-
- * New upstream release.
- + bump (build-)dep on x11proto-composite-dev to >= 1:0.4.
- * Use binary:Version instead of Source-Version in debian/control.
- * Add myself to Uploaders, and remove Branden with his permission.
- * Add upstream URL to debian/copyright.
-
- -- Julien Cristau <jcristau@debian.org> Sun, 02 Dec 2007 13:42:56 +0100
-
-libxcomposite (1:0.3.2-1) unstable; urgency=low
-
- [ Brice Goglin ]
- * New upstream release.
- * Add xmlto to Build-Depends.
- * Install new manpages within libxcomposite-dev.
- * Add XS-Vcs-Browser header in debian/control.
- * Remove Fabio from uploaders with his permission. He's always welcome back.
-
- [ Julien Cristau ]
- * Update debian/copyright.
-
- -- Julien Cristau <jcristau@debian.org> Fri, 11 May 2007 15:14:38 +0200
-
-libxcomposite (1:0.3.1-2) unstable; urgency=low
-
- * Upload to unstable.
-
- -- Julien Cristau <jcristau@debian.org> Wed, 11 Apr 2007 11:46:19 +0200
-
-libxcomposite (1:0.3.1-1) experimental; urgency=low
-
- * Adjust Section and Priority values to what the override says.
- * Update location of upstream repository from CVS to git in the long
- descriptions.
- * New upstream release.
- + drop patch applied upstream.
- * Add XS-Vcs-Git header in debian/control.
- * Install the upstream changelog.
-
- -- Julien Cristau <jcristau@debian.org> Tue, 13 Feb 2007 10:00:49 +0100
-
-libxcomposite (1:0.3-3) unstable; urgency=low
-
- * calls UnlockDisplay without calling LockDisplay first (Closes:
- #400440)
- * Add Josh and myself to Uploaders.
- * Enable xsfbs patch application.
- * Add quilt to Build-Depends.
-
- -- Jamey Sharp <sharpone@debian.org> Mon, 27 Nov 2006 16:07:41 -0800
-
-libxcomposite (1:0.3-2) unstable; urgency=low
-
- [ Thierry Reding ]
- * Make packages built against libxcomposite depend on (>= 1:0.3-1) because
- of the addition of the XComposite{Get,Release}OverlayWindow functions.
- Thanks Eugene Konev. Closes: #390254.
-
- -- David Nusinow <dnusinow@debian.org> Sat, 30 Sep 2006 14:41:13 -0400
-
-libxcomposite (1:0.3-1) unstable; urgency=low
-
- [ Thierry Reding ]
- * New upstream release.
- * Bumped Standards-Version to 3.7.2, no changes required.
- * Removed build-dependency on libxdamage-dev because it is no longer needed.
- * Added build-dependencies on libxext-dev and x11proto-fixes-dev to reflect
- the PKG_CHECK_MODULES list.
-
- [ David Nusinow ]
- * Remove extra dependency on x11-common in -dev package
- * Change versioned pre-dep on x11-common to 1:7.0.0 to shut lintian up
- * Re-align -dbg package extended description to make lintian happy
-
- -- David Nusinow <dnusinow@debian.org> Thu, 28 Sep 2006 22:24:14 -0400
-
-libxcomposite (1:0.2.2.2-3) unstable; urgency=low
-
- * Reorder makeshlib command in rules file so that ldconfig is run
- properly. Thanks Drew Parsons and Steve Langasek.
-
- -- David Nusinow <dnusinow@debian.org> Tue, 18 Apr 2006 21:49:57 -0400
-
-libxcomposite (1:0.2.2.2-2) unstable; urgency=low
-
- * Upload to unstable
-
- -- David Nusinow <dnusinow@debian.org> Thu, 23 Mar 2006 22:44:30 -0500
-
-libxcomposite (1:0.2.2.2-1) experimental; urgency=low
-
- * First upload to Debian
- * Fix copyright file to use COPYING file shipped in RC1. For some reason it
- was listed as GPL.
-
- -- David Nusinow <dnusinow@debian.org> Thu, 29 Dec 2005 20:51:30 -0500
-
-libxcomposite (1:0.2.0-3) breezy; urgency=low
-
- * Bump Build-Depends on libxfixes-dev, libxdamage-dev and libx11-dev high
- enough that we route around the wonderful _XOPEN_SOURCE incident.
-
- -- Daniel Stone <daniel.stone@ubuntu.com> Fri, 22 Jul 2005 23:46:03 +1000
-
-libxcomposite (1:0.2.0-2) breezy; urgency=low
-
- * Add B-D on libxdamage-dev.
-
- -- Daniel Stone <daniel.stone@ubuntu.com> Tue, 12 Jul 2005 13:27:37 +1000
-
-libxcomposite (1:0.2.0-1) breezy; urgency=low
-
- * First libxcomposite release.
-
- -- Daniel Stone <daniel.stone@ubuntu.com> Mon, 16 May 2005 22:10:17 +1000
+++ /dev/null
-Source: libxcomposite
-Section: x11
-Priority: optional
-Maintainer: Sung-Jin Park <sj76.park@samsung.com>, Sanjin Lee <lsj119@samsung.com>, Debian X Strike Force <debian-x@lists.debian.org>
-Uploaders: Sung-Jin Park <sj76.park@samsung.com>, SooChan Lim <sc1.lim@samsung.com>, David Nusinow <dnusinow@debian.org>, Brice Goglin <bgoglin@debian.org>
-Build-Depends: debhelper (>= 5.0.0), libx11-dev (>= 1:0.99.2), libxfixes-dev (>= 1:3.0.0-4), x11proto-composite-dev (>= 1:0.4), libxext-dev, x11proto-fixes-dev, pkg-config, xmlto, automake, libtool, xutils-dev (>= 1:7.5-1slp2+1),
-Standards-Version: 3.9.0
-Vcs-Git: git://git.debian.org/git/pkg-xorg/lib/libxcomposite
-Vcs-Browser: http://git.debian.org/?p=pkg-xorg/lib/libxcomposite.git
-
-Package: libxcomposite1
-Section: libs
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Description: X11 Composite extension library
- libXcomposite provides an X Window System client interface to the Composite
- extension to the X protocol.
- .
- The Composite extension allows clients called compositing managers to control
- the final drawing of the screen. Rendering is done into an off-screen buffer.
- .
- More information about X.Org can be found at:
- <URL:http://www.X.org>
- .
- This module can be found at
- git://anongit.freedesktop.org/git/xorg/lib/libXcomposite
-
-Package: libxcomposite1-dbg
-Architecture: any
-Section: debug
-Priority: extra
-Depends: ${shlibs:Depends}, ${misc:Depends}, libxcomposite1 (= ${binary:Version})
-Description: X11 Composite extension library (debug package)
- libXcomposite provides an X Window System client interface to the Composite
- extension to the X protocol.
- .
- The Composite extension allows clients called compositing managers to control
- the final drawing of the screen. Rendering is done into an off-screen buffer.
- .
- This package contains the debug versions of the library found in
- libxcomposite1. Non-developers likely have little use for this package.
- .
- More information about X.Org can be found at:
- <URL:http://www.X.org>
- .
- This module can be found at
- git://anongit.freedesktop.org/git/xorg/lib/libXcomposite
-
-Package: libxcomposite-dev
-Architecture: any
-Section: libdevel
-Depends: ${shlibs:Depends}, ${misc:Depends}, libxcomposite1 (= ${binary:Version}), libx11-dev, libxfixes-dev, x11proto-composite-dev (>= 1:0.4), x11proto-core-dev, libxext-dev
-Description: X11 Composite extension library (development headers)
- libXcomposite provides an X Window System client interface to the Composite
- extension to the X protocol.
- .
- The Composite extension allows clients called compositing managers to control
- the final drawing of the screen. Rendering is done into an off-screen buffer.
- .
- This package contains the development headers for the library found in
- libxcomposite1. Non-developers likely have little use for this package.
- .
- More information about X.Org can be found at:
- <URL:http://www.X.org>
- .
- This module can be found at
- git://anongit.freedesktop.org/git/xorg/lib/libXcomposite
+++ /dev/null
-This package was downloaded from
-http://xorg.freedesktop.org/releases/individual/lib/
-
-Copyright © 2001,2003 Keith Packard
-
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that
-copyright notice and this permission notice appear in supporting
-documentation, and that the name of Keith Packard not be used in
-advertising or publicity pertaining to distribution of the software without
-specific, written prior permission. Keith Packard makes no
-representations about the suitability of this software for any purpose. It
-is provided "as is" without express or implied warranty.
-
-KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
-DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
-TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-PERFORMANCE OF THIS SOFTWARE.
-
-Copyright (c) 2006, 2007, Oracle and/or its affiliates. All rights reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a
-copy of this software and associated documentation files (the "Software"),
-to deal in the Software without restriction, including without limitation
-the rights to use, copy, modify, merge, publish, distribute, sublicense,
-and/or sell copies of the Software, and to permit persons to whom the
-Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice (including the next
-paragraph) shall be included in all copies or substantial portions of the
-Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
-THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-DEALINGS IN THE SOFTWARE.
+++ /dev/null
-usr/include/X11/*
-usr/lib/libXcomposite.a
-usr/lib/libXcomposite.so
-usr/lib/libXcomposite.la
-usr/lib/pkgconfig/xcomposite.pc
+++ /dev/null
-usr/lib/libXcomposite.so.1*
+++ /dev/null
-#!/usr/bin/make -f
-# debian/rules for the Debian libxcomposite package.
-# Copyright © 2004 Scott James Remnant <scott@netsplit.com>
-# Copyright © 2005 Daniel Stone <daniel@fooishbar.org>
-# Copyright © 2005 David Nusinow <dnusinow@debian.org>
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-# set this to the name of the main shlib's binary package
-PACKAGE = libxcomposite1
-
-include debian/xsfbs/xsfbs.mk
-
-CFLAGS = -Wall -g
-LDFLAGS += -Wl,--hash-style=both -Wl,--as-needed
-ifneq (,$(filter noopt,$(DEB_BUILD_OPTIONS)))
- CFLAGS += -O0
-else
- CFLAGS += -O2
-endif
-ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
- NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
- MAKEFLAGS += -j$(NUMJOBS)
-endif
-
-DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
-DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
- confflags += --build=$(DEB_HOST_GNU_TYPE)
-else
- confflags += --build=$(DEB_HOST_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE)
-# confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE)
-endif
-
-
-build: build-stamp
-build-stamp:
- dh_testdir
- ./autogen.sh
- #autoreconf -vfi
- mkdir -p obj-$(DEB_BUILD_GNU_TYPE)
- cd obj-$(DEB_BUILD_GNU_TYPE) && \
- ../configure --prefix=/usr --mandir=\$${prefix}/share/man \
- --infodir=\$${prefix}/share/info $(confflags) \
- CFLAGS="$(CFLAGS)" \
- LDFLAGS="$(LDFLAGS)"
- cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE)
- >$@
-
-clean: xsfclean
- dh_testdir
- dh_testroot
- rm -f build-stamp
-
- rm -f config.cache config.log config.status
- rm -f */config.cache */config.log */config.status
- rm -f conftest* */conftest*
- rm -rf autom4te.cache */autom4te.cache
- rm -rf obj-*
- rm -f aclocal.m4 config.guess config.h.in config.sub configure
- rm -f depcomp install-sh missing mkinstalldirs
- rm -f ltmain.sh
- find -name Makefile.in -exec rm -f {} \;
- #find -name Makefile.in -delete
-
- dh_clean
-
-install: build
- dh_testdir
- dh_testroot
- dh_clean -k
- dh_installdirs
-
- cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
-
-# Build architecture-dependent files here.
-binary-arch: build install
- dh_testdir
- dh_testroot
-
-# dh_installdocs
- dh_install --sourcedir=debian/tmp --list-missing
-# dh_installchangelogs ChangeLog
- dh_link
-# dh_installman
- dh_strip --dbg-package=$(PACKAGE)-dbg
- dh_compress
- dh_fixperms
- dh_makeshlibs -V "libxcomposite1 (>= 1:0.3-1)"
- dh_shlibdeps
- dh_installdeb
- dh_gencontrol
- dh_md5sums
- dh_builddeb
-
-# Build architecture-independent files here.
-binary-indep: build install
-# Nothing to do
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install
+++ /dev/null
-version=3
-http://xorg.freedesktop.org/releases/individual/lib/ libXcomposite-(.*)\.tar\.gz
+++ /dev/null
-#!/bin/sh
-
-set -e
-
-if ! [ -d debian/prune ]; then
- exit 0
-fi
-
-if [ "x$1" != x--upstream-version ]; then
- exit 1
-fi
-
-version="$2"
-filename="$3"
-
-if [ -z "$version" ] || ! [ -f "$filename" ]; then
- exit 1
-fi
-
-dir="$(pwd)"
-tempdir="$(mktemp -d)"
-
-cd "$tempdir"
-tar xf "$dir/$filename"
-cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
-
-tar czf "$dir/$filename" *
-cd "$dir"
-rm -rf "$tempdir"
-echo "Done pruning upstream tarball"
-
-exit 0
+++ /dev/null
-#!/usr/bin/make -f
-
-# Debian X Strike Force Build System (XSFBS): Make portion
-
-# Copyright 1996 Stephen Early
-# Copyright 1997 Mark Eichin
-# Copyright 1998-2005, 2007 Branden Robinson
-# Copyright 2005 David Nusinow
-#
-# Licensed under the GNU General Public License, version 2. See the file
-# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
-
-# Originally by Stephen Early <sde1000@debian.org>
-# Modified by Mark W. Eichin <eichin@kitten.gen.ma.us>
-# Modified by Adam Heath <doogie@debian.org>
-# Modified by Branden Robinson <branden@debian.org>
-# Modified by Fabio Massimo Di Nitto <fabbione@fabbione.net>
-# Modified by David Nusinow <dnusinow@debian.org>
-# Acknowledgements to Manoj Srivastava.
-
-# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
-export DH_OPTIONS
-
-# force quilt to not use ~/.quiltrc and to use debian/patches
-QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
-
-# Set up parameters for the upstream build environment.
-
-# Determine (source) package name from Debian changelog.
-SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Source:' | awk '{print $$2}')
-
-# Determine package version from Debian changelog.
-SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Version:' | awk '{print $$2}')
-
-# Determine upstream version number.
-UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
-
-# Determine the source version without the epoch for make-orig-tar-gz
-NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
-
-# Figure out who's building this package.
-BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
-
-# Find out if this is an official build; an official build has nothing but
-# digits, dots, and/or the codename of a release in the Debian part of the
-# version number. Anything else indicates an unofficial build.
-OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
-
-# Set up parameters for the Debian build environment.
-
-# Determine our architecture.
-BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
-# Work around some old-time dpkg braindamage.
-BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
-# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
-ifdef DEB_HOST_ARCH
- ARCH:=$(DEB_HOST_ARCH)
-else
- # dpkg-cross sets the ARCH environment variable; if set, use it.
- ifdef ARCH
- ARCH:=$(ARCH)
- else
- ARCH:=$(BUILD_ARCH)
- endif
-endif
-
-# $(STAMP_DIR) houses stamp files for complex targets.
-STAMP_DIR:=stampdir
-
-# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
-# their files.
-DEBTREEDIR:=$(CURDIR)/debian/tmp
-
-# All "important" targets have four lines:
-# 1) A target name that is invoked by a package-building tool or the user.
-# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
-# 2) A line delcaring 1) as a phony target (".PHONY:").
-# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
-# depend on other targets.
-# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
-# "$(STAMP_DIR)/" prefix is omitted.
-#
-# This indirection is needed so that the "stamp" files that signify when a rule
-# is done can be located in a separate "stampdir". Recall that make has no way
-# to know when a goal has been met for a phony target (like "build" or
-# "install").
-#
-# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
-# so that the target will not be run again. Removing the file will make Make
-# run the target over.
-
-# All phony targets should be declared as dependencies of .PHONY, even if they
-# do not have "($STAMP_DIR)/"-prefixed counterparts.
-
-# Define a harmless default rule to keep things from going nuts by accident.
-.PHONY: default
-default:
-
-# Set up the $(STAMP_DIR) directory.
-.PHONY: stampdir
-stampdir_targets+=stampdir
-stampdir: $(STAMP_DIR)/stampdir
-$(STAMP_DIR)/stampdir:
- mkdir $(STAMP_DIR)
- >$@
-
-# Set up the package build directory as quilt expects to find it.
-.PHONY: prepare
-stampdir_targets+=prepare
-prepare: $(STAMP_DIR)/prepare
-$(STAMP_DIR)/prepare: $(STAMP_DIR)/logdir $(STAMP_DIR)/genscripts
- >$@
-
-.PHONY: logdir
-stampdir_targets+=logdir
-logdir: $(STAMP_DIR)/logdir
-$(STAMP_DIR)/logdir: $(STAMP_DIR)/stampdir
- mkdir -p $(STAMP_DIR)/log
- >$@
-
-# Apply all patches to the upstream source.
-.PHONY: patch
-stampdir_targets+=patch
-patch: $(STAMP_DIR)/patch
-$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
- if ! [ `which quilt` ]; then \
- echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
- exit 1; \
- fi; \
- if $(QUILT) next >/dev/null 2>&1; then \
- echo -n "Applying patches..."; \
- if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
- cat $(STAMP_DIR)/log/patch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/patch; \
- echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "No patches to apply"; \
- fi; \
- >$@
-
-# Revert all patches to the upstream source.
-.PHONY: unpatch
-unpatch: $(STAMP_DIR)/logdir
- rm -f $(STAMP_DIR)/patch
- @echo -n "Unapplying patches..."; \
- if $(QUILT) applied >/dev/null 2>/dev/null; then \
- if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "nothing to do."; \
- fi
-
-# Clean the generated maintainer scripts.
-.PHONY: cleanscripts
-cleanscripts:
- rm -f $(STAMP_DIR)/genscripts
- rm -f debian/*.config \
- debian/*.postinst \
- debian/*.postrm \
- debian/*.preinst \
- debian/*.prerm
-
-# Clean the package build tree.
-.PHONY: xsfclean
-xsfclean: cleanscripts unpatch
- dh_testdir
- rm -rf .pc
- rm -rf $(STAMP_DIR)
- dh_clean
-
-# Remove files from the upstream source tree that we don't need, or which have
-# licensing problems. It must be run before creating the .orig.tar.gz.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: prune-upstream-tree
-prune-upstream-tree:
- # Ensure we're in the correct directory.
- dh_testdir
- grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
-
-# Verify that there are no offsets or fuzz in the patches we apply.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: patch-audit
-patch-audit: prepare unpatch
- @echo -n "Auditing patches..."; \
- >$(STAMP_DIR)/log/patch; \
- FUZZY=; \
- while [ -n "$$($(QUILT) next)" ]; do \
- RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
- case "$$RESULT" in \
- succeeded) \
- echo "fuzzy patch: $$($(QUILT) top)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
- FUZZY=yes; \
- ;; \
- FAILED) \
- echo "broken patch: $$($(QUILT) next)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
- exit 1; \
- ;; \
- esac; \
- done; \
- if [ -n "$$FUZZY" ]; then \
- echo "there were fuzzy patches; please fix."; \
- exit 1; \
- else \
- echo "done."; \
- fi
-
-# Generate the maintainer scripts.
-.PHONY: genscripts
-stampdir_targets+=genscripts
-genscripts: $(STAMP_DIR)/genscripts
-$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
- for FILE in debian/*.config.in \
- debian/*.postinst.in \
- debian/*.postrm.in \
- debian/*.preinst.in \
- debian/*.prerm.in; do \
- if [ -e "$$FILE" ]; then \
- MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
- sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
- cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
- sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
- sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
- -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
- <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
- rm $$MAINTSCRIPT.tmp; \
- fi; \
- done
- # Validate syntax of generated shell scripts.
- #sh debian/scripts/validate-posix-sh debian/*.config \
- # debian/*.postinst \
- # debian/*.postrm \
- # debian/*.preinst \
- # debian/*.prerm
- >$@
-
-# Compute dependencies for drivers
-#
-VIDEODEP = $(shell cat /usr/share/xserver-xorg/videodrvdep 2>/dev/null)
-INPUTDEP = $(shell cat /usr/share/xserver-xorg/xinputdep 2>/dev/null)
-
-# these two can be removed post-squeeze
-VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
-INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
-VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI), xorg-driver-video
-INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI), xorg-driver-input
-
-ifeq ($(PACKAGE),)
-PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
-endif
-
-.PHONY: serverabi
-serverabi: install
-ifeq ($(VIDEODEP),)
- @echo 'error: xserver-xorg-dev >= 1.7.6.901 needs to be installed'
- @exit 1
-else
- echo "xviddriver:Depends=$(VIDEODEP)" >> debian/$(PACKAGE).substvars
- echo "xinpdriver:Depends=$(INPUTDEP)" >> debian/$(PACKAGE).substvars
- # the following is there for compatibility...
- echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
- echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
- echo "xserver:Depends=$(VIDEODEP), $(INPUTDEP)" >> debian/$(PACKAGE).substvars
-endif
-
-# vim:set noet ai sts=8 sw=8 tw=0:
+++ /dev/null
-# This is the X Strike Force shell library for X Window System package
-# maintainer scripts. It serves to define shell functions commonly used by
-# such packages, and performs some error checking necessary for proper operation
-# of those functions. By itself, it does not "do" much; the maintainer scripts
-# invoke the functions defined here to accomplish package installation and
-# removal tasks.
-
-# If you are reading this within a Debian package maintainer script (e.g.,
-# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
-# skip past this library by scanning forward in this file to the string
-# "GOBSTOPPER".
-
-SOURCE_VERSION=@SOURCE_VERSION@
-OFFICIAL_BUILD=@OFFICIAL_BUILD@
-
-# Use special abnormal exit codes so that problems with this library are more
-# easily tracked down.
-SHELL_LIB_INTERNAL_ERROR=86
-SHELL_LIB_THROWN_ERROR=74
-SHELL_LIB_USAGE_ERROR=99
-
-# old -> new variable names
-if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
- DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
-fi
-if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
- DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
-fi
-
-# initial sanity checks
-if [ -z "$THIS_PACKAGE" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_PACKAGE shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of this package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ -z "$THIS_SCRIPT" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_SCRIPT shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of the
-"$THIS_PACKAGE" package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
- RECONFIGURE="true"
-else
- RECONFIGURE=
-fi
-
-if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
- FIRSTINST="yes"
-fi
-
-if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
- UPGRADE="yes"
-fi
-
-trap "message;\
- message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
- message;\
- exit 1" HUP INT QUIT TERM
-
-reject_nondigits () {
- # syntax: reject_nondigits [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted) for
- # characters other than decimal digits and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain anything but digits?
- if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- # can't use die(), because it wraps message() which wraps this function
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
- "possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-reject_unlikely_path_chars () {
- # syntax: reject_unlikely_path_chars [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted) for
- # characters unlikely to be seen in a path and which the shell might
- # interpret and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain any funny characters?
- if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
- # can't use die(), because I want to avoid forward references
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
- "encountered possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-# Query the terminal to establish a default number of columns to use for
-# displaying messages to the user. This is used only as a fallback in the
-# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while
-# the script is running, and this cannot, only being calculated once.)
-DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
-if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- DEFCOLUMNS=80
-fi
-
-message () {
- # pretty-print messages of arbitrary length
- reject_nondigits "$COLUMNS"
- echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
-}
-
-observe () {
- # syntax: observe message ...
- #
- # issue observational message suitable for logging someday when support for
- # it exists in dpkg
- if [ -n "$DEBUG_XORG_PACKAGE" ]; then
- message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
- fi
-}
-
-warn () {
- # syntax: warn message ...
- #
- # issue warning message suitable for logging someday when support for
- # it exists in dpkg; also send to standard error
- message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
-}
-
-die () {
- # syntax: die message ...
- #
- # exit script with error message
- message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
- exit $SHELL_LIB_THROWN_ERROR
-}
-
-internal_error () {
- # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
- message "internal error: $*"
- if [ -n "$OFFICIAL_BUILD" ]; then
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of" \
- "the same name to file a report."
- fi
- exit $SHELL_LIB_INTERNAL_ERROR
-}
-
-usage_error () {
- message "usage error: $*"
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of" \
- "the same name to file a report."
- exit $SHELL_LIB_USAGE_ERROR
-}
-
-font_update () {
- # run $UPDATECMDS in $FONTDIRS
-
- local dir cmd shortcmd x_font_dir_prefix
-
- x_font_dir_prefix="/usr/share/fonts/X11"
-
- if [ -z "$UPDATECMDS" ]; then
- usage_error "font_update() called but \$UPDATECMDS not set"
- fi
- if [ -z "$FONTDIRS" ]; then
- usage_error "font_update() called but \$FONTDIRS not set"
- fi
-
- reject_unlikely_path_chars "$UPDATECMDS"
- reject_unlikely_path_chars "$FONTDIRS"
-
- for dir in $FONTDIRS; do
- if [ -d "$x_font_dir_prefix/$dir" ]; then
- for cmd in $UPDATECMDS; do
- if which "$cmd" > /dev/null 2>&1; then
- shortcmd=${cmd##*/}
- observe "running $shortcmd in $dir font directory"
- cmd_opts=
- if [ "$shortcmd" = "update-fonts-alias" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-dir" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-scale" ]; then
- cmd_opts=--x11r7-layout
- fi
- $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
- "failed; font directory data may not" \
- "be up to date"
- else
- warn "$cmd not found; not updating corresponding $dir font" \
- "directory data"
- fi
- done
- else
- warn "$dir is not a directory; not updating font directory data"
- fi
- done
-}
-
-remove_conffile_prepare () {
- # syntax: remove_conffile_prepare filename official_md5sum ...
- #
- # Check a conffile "filename" against a list of canonical MD5 checksums.
- # If the file's current MD5 checksum matches one of the "official_md5sum"
- # operands provided, then prepare the conffile for removal from the system.
- # We defer actual deletion until the package is configured so that we can
- # roll this operation back if package installation fails.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install" and verify $2 to ensure the package is being upgraded from a
- # version (or installed over a version removed-but-not-purged) prior to the
- # one in which the conffile was obsoleted.
-
- local conffile current_checksum
-
- # validate arguments
- if [ $# -lt 2 ]; then
- usage_error "remove_conffile_prepare() called with wrong number of" \
- "arguments; expected at least 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
- shift
-
- # does the conffile even exist?
- if [ -e "$conffile" ]; then
- # calculate its checksum
- current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
- # compare it to each supplied checksum
- while [ -n "$1" ]; do
- if [ "$current_checksum" = "$1" ]; then
- # we found a match; move the confffile and stop looking
- observe "preparing obsolete conffile $conffile for removal"
- mv "$conffile" "$conffile.$THIS_PACKAGE-tmp"
- break
- fi
- shift
- done
- fi
-}
-
-remove_conffile_lookup () {
- # syntax: remove_conffile_lookup package filename
- #
- # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal
- # if it matches the actual file's md5sum.
- #
- # Call this function when you would call remove_conffile_prepare but only
- # want to check against dpkg's status database instead of known checksums.
-
- local package conffile old_md5sum
-
- # validate arguments
- if [ $# -ne 2 ]; then
- usage_error "remove_conffile_lookup() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- package="$1"
- conffile="$2"
-
- if ! [ -e "$conffile" ]; then
- return
- fi
- old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \
- awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')"
- if [ -n "$old_md5sum" ]; then
- remove_conffile_prepare "$conffile" "$old_md5sum"
- fi
-}
-
-remove_conffile_commit () {
- # syntax: remove_conffile_commit filename
- #
- # Complete the removal of a conffile "filename" that has become obsolete.
- #
- # Call this function from a postinst script after having used
- # remove_conffile_prepare() in the preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "remove_conffile_commit() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- # if the temporary file created by remove_conffile_prepare() exists, remove it
- if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
- observe "committing removal of obsolete conffile $conffile"
- rm "$conffile.$THIS_PACKAGE-tmp"
- fi
-}
-
-remove_conffile_rollback () {
- # syntax: remove_conffile_rollback filename
- #
- # Roll back the removal of a conffile "filename".
- #
- # Call this function from a postrm script in the event $1 is "abort-upgrade"
- # or "abort-install" is after having used remove_conffile_prepare() in the
- # preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "remove_conffile_rollback() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- # if the temporary file created by remove_conffile_prepare() exists, move it
- # back
- if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
- observe "rolling back removal of obsolete conffile $conffile"
- mv "$conffile.$THIS_PACKAGE-tmp" "$conffile"
- fi
-}
-
-replace_conffile_with_symlink_prepare () {
- # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
- # official_md5sum ...
- #
- # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
- # If the file's current MD5 checksum matches one of the "official_md5sum"
- # operands provided, then prepare the conffile for removal from the system.
- # We defer actual deletion until the package is configured so that we can
- # roll this operation back if package installation fails. Otherwise copy it
- # to newfilename and let dpkg handle it through conffiles mechanism.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install" and verify $2 to ensure the package is being upgraded from a
- # version (or installed over a version removed-but-not-purged) prior to the
- # one in which the conffile was obsoleted.
-
- local conffile current_checksum
-
- # validate arguments
- if [ $# -lt 3 ]; then
- usage_error "replace_conffile_with_symlink_prepare() called with wrong" \
- " number of arguments; expected at least 3, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- oldconffile="$1"
- shift
- newconffile="$1"
- shift
-
- remove_conffile_prepare "$_oldconffile" "$@"
- # If $oldconffile still exists, then md5sums didn't match.
- # Copy it to new one.
- if [ -f "$oldconffile" ]; then
- cp "$oldconffile" "$newconffile"
- fi
-
-}
-
-replace_conffile_with_symlink_commit () {
- # syntax: replace_conffile_with_symlink_commit oldfilename
- #
- # Complete the removal of a conffile "oldfilename" that has been
- # replaced by a symlink.
- #
- # Call this function from a postinst script after having used
- # replace_conffile_with_symlink_prepare() in the preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "replace_conffile_with_symlink_commit() called with wrong" \
- "number of arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- remove_conffile_commit "$conffile"
-}
-
-replace_conffile_with_symlink_rollback () {
- # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename
- #
- # Roll back the replacing of a conffile "oldfilename" with symlink to
- # "newfilename".
- #
- # Call this function from a postrm script in the event $1 is "abort-upgrade"
- # or "abort-install" and verify $2 to ensure the package failed to upgrade
- # from a version (or install over a version removed-but-not-purged) prior
- # to the one in which the conffile was obsoleted.
- # You should have used replace_conffile_with_symlink_prepare() in the
- # preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 2 ]; then
- usage_error "replace_conffile_with_symlink_rollback() called with wrong" \
- "number of arguments; expected 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- oldconffile="$1"
- newconffile="$2"
-
- remove_conffile_rollback "$_oldconffile"
- if [ -f "$newconffile" ]; then
- rm "$newconffile"
- fi
-}
-
-run () {
- # syntax: run command [ argument ... ]
- #
- # Run specified command with optional arguments and report its exit status.
- # Useful for commands whose exit status may be nonzero, but still acceptable,
- # or commands whose failure is not fatal to us.
- #
- # NOTE: Do *not* use this function with db_get or db_metaget commands; in
- # those cases the return value of the debconf command *must* be checked
- # before the string returned by debconf is used for anything.
-
- local retval
-
- # validate arguments
- if [ $# -lt 1 ]; then
- usage_error "run() called with wrong number of arguments; expected at" \
- "least 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- "$@" || retval=$?
-
- if [ ${retval:-0} -ne 0 ]; then
- observe "command \"$*\" exited with status $retval"
- fi
-}
-
-make_symlink_sane () {
- # syntax: make_symlink_sane symlink target
- #
- # Ensure that the symbolic link symlink exists, and points to target.
- #
- # If symlink does not exist, create it and point it at target.
- #
- # If symlink exists but is not a symbolic link, back it up.
- #
- # If symlink exists, is a symbolic link, but points to the wrong location, fix
- # it.
- #
- # If symlink exists, is a symbolic link, and already points to target, do
- # nothing.
- #
- # This function wouldn't be needed if ln had an -I, --idempotent option.
-
- # Validate arguments.
- if [ $# -ne 2 ]; then
- usage_error "make_symlink_sane() called with wrong number of arguments;" \
- "expected 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- # We could just use the positional parameters as-is, but that makes things
- # harder to follow.
- local symlink target
-
- symlink="$1"
- target="$2"
-
- if [ -L "$symlink" ] && [ "$(readlink "$symlink")" = "$target" ]; then
- observe "link from $symlink to $target already exists"
- else
- observe "creating symbolic link from $symlink to $target"
- mkdir -p "${target%/*}" "${symlink%/*}"
- ln -s -b -S ".dpkg-old" "$target" "$symlink"
- fi
-}
-
-migrate_dir_to_symlink () {
- # syntax: migrate_dir_to_symlink old_location new_location
- #
- # Per Debian Policy section 6.5.4, "A directory will never be replaced by a
- # symbolic link to a directory or vice versa; instead, the existing state
- # (symlink or not) will be left alone and dpkg will follow the symlink if
- # there is one."
- #
- # We have to do it ourselves.
- #
- # This function moves the contents of old_location, a directory, into
- # new_location, a directory, then makes old_location a symbolic link to
- # new_location.
- #
- # old_location need not exist, but if it does, it must be a directory (or a
- # symlink to a directory). If it is not, it is backed up. If new_location
- # exists already and is not a directory, it is backed up.
- #
- # This function should be called from a package's preinst so that other
- # packages unpacked after this one --- but before this package's postinst runs
- # --- are unpacked into new_location even if their payloads contain
- # old_location filespecs.
-
- # Validate arguments.
- if [ $# -ne 2 ]; then
- usage_error "migrate_dir_to_symlink() called with wrong number of"
- "arguments; expected 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- # We could just use the positional parameters as-is, but that makes things
- # harder to follow.
- local new old
-
- old="$1"
- new="$2"
-
- # Is old location a symlink?
- if [ -L "$old" ]; then
- # Does it already point to new location?
- if [ "$(readlink "$old")" = "$new" ]; then
- # Nothing to do; migration has already been done.
- observe "migration of $old to $new already done"
- return 0
- else
- # Back it up.
- warn "backing up symbolic link $old as $old.dpkg-old"
- mv -b "$old" "$old.dpkg-old"
- fi
- fi
-
- # Does old location exist, but is not a directory?
- if [ -e "$old" ] && ! [ -d "$old" ]; then
- # Back it up.
- warn "backing up non-directory $old as $old.dpkg-old"
- mv -b "$old" "$old.dpkg-old"
- fi
-
- observe "migrating $old to $new"
-
- # Is new location a symlink?
- if [ -L "$new" ]; then
- # Does it point the wrong way, i.e., back to where we're migrating from?
- if [ "$(readlink "$new")" = "$old" ]; then
- # Get rid of it.
- observe "removing symbolic link $new which points to $old"
- rm "$new"
- else
- # Back it up.
- warn "backing up symbolic link $new as $new.dpkg-old"
- mv -b "$new" "$new.dpkg-old"
- fi
- fi
-
- # Does new location exist, but is not a directory?
- if [ -e "$new" ] && ! [ -d "$new" ]; then
- warn "backing up non-directory $new as $new.dpkg-old"
- mv -b "$new" "$new.dpkg-old"
- fi
-
- # Create new directory if it does not yet exist.
- if ! [ -e "$new" ]; then
- observe "creating $new"
- mkdir -p "$new"
- fi
-
- # Copy files in old location to new location. Back up any filenames that
- # already exist in the new location with the extension ".dpkg-old".
- observe "copying files from $old to $new"
- if ! (cd "$old" && cp -a -b -S ".dpkg-old" . "$new"); then
- die "error(s) encountered while copying files from $old to $new"
- fi
-
- # Remove files at old location.
- observe "removing $old"
- rm -r "$old"
-
- # Create symlink from old location to new location.
- make_symlink_sane "$old" "$new"
-}
-
-# vim:set ai et sw=2 ts=2 tw=80:
-
-# GOBSTOPPER: The X Strike Force shell library ends here.
--- /dev/null
+Summary: X Composite Extension library
+Name: libXcomposite
+Version: 0.4.3
+Release: 3
+License: MIT
+Group: System Environment/Libraries
+URL: http://www.x.org
+
+Source0: %{name}-%{version}.tar.gz
+
+BuildRequires: pkgconfig(compositeproto) >= 0.4
+BuildRequires: pkgconfig(xfixes) pkgconfig(xext)
+BuildRequires: pkgconfig(xorg-macros)
+
+%description
+X Composite Extension library
+
+%package devel
+Summary: Development files for %{name}
+Group: Development/Libraries
+Provides: libxcomposite-devel
+Requires: %{name} = %{version}-%{release}
+
+%description devel
+X.Org X11 libXcomposite development package
+
+%prep
+%setup -q
+
+%build
+%reconfigure --disable-static\
+ LDFLAGS="${LDFLAGS} -Wl,--hash-style=both -Wl,--as-needed"
+make %{?jobs:-j%jobs}
+
+%install
+rm -rf $RPM_BUILD_ROOT
+make install DESTDIR=$RPM_BUILD_ROOT
+rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
+
+%remove_docs
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%post -p /sbin/ldconfig
+%postun -p /sbin/ldconfig
+
+%files
+%defattr(-,root,root,-)
+%doc AUTHORS COPYING README ChangeLog
+%{_libdir}/libXcomposite.so.1
+%{_libdir}/libXcomposite.so.1.0.0
+
+%files devel
+%defattr(-,root,root,-)
+%{_includedir}/X11/extensions/Xcomposite.h
+%{_libdir}/libXcomposite.so
+%{_libdir}/pkgconfig/xcomposite.pc
+#%{_mandir}/man3/X?omposite*.3*
\ No newline at end of file
+++ /dev/null
-
-Name: libxcomposite
-Summary: X.Org X11 libXcomposite runtime library
-Version: 0.4.3
-Release: 2.4
-Group: System/Libraries
-License: MIT/X11
-URL: http://www.x.org
-Source0: http://xorg.freedesktop.org/releases/individual/lib/%{name}-%{version}.tar.gz
-Requires(post): /sbin/ldconfig
-Requires(postun): /sbin/ldconfig
-BuildRequires: pkgconfig(compositeproto)
-BuildRequires: pkgconfig(x11)
-BuildRequires: pkgconfig(xext)
-BuildRequires: pkgconfig(xfixes)
-BuildRequires: pkgconfig(fixesproto)
-BuildRequires: pkgconfig(xorg-macros)
-
-
-%description
-X Composite Library
-
-
-%package devel
-Summary: X.Org X11 libXcomposite development package
-Group: System/Libraries
-Requires: %{name} = %{version}-%{release}
-Requires: xorg-x11-filesystem
-
-%description devel
-Development files for libxcomposite
-
-
-%prep
-%setup -q -n %{name}-%{version}
-
-
-%build
-export LDFLAGS+=" -Wl,--hash-style=both -Wl,--as-needed"
-%reconfigure --disable-static
-make %{?jobs:-j%jobs}
-
-%install
-rm -rf %{buildroot}
-%make_install
-
-
-
-
-%post -p /sbin/ldconfig
-
-%postun -p /sbin/ldconfig
-
-
-
-
-
-%files
-%defattr(-,root,root,-)
-%doc AUTHORS COPYING README ChangeLog
-%{_libdir}/libXcomposite.so.1
-%{_libdir}/libXcomposite.so.1.0.0
-
-
-%files devel
-%defattr(-,root,root,-)
-%dir %{_includedir}/X11
-%dir %{_includedir}/X11/extensions
-%{_includedir}/X11/extensions/Xcomposite.h
-%{_libdir}/libXcomposite.so
-%{_libdir}/pkgconfig/xcomposite.pc
-%doc %{_mandir}/man3/X?omposite*.3*
-
projects / framework / uifw / xorg / lib / libxcomposite.git / commitdiff