--- /dev/null
+cmake_minimum_required(VERSION 2.8)
+project (system-plugin-slp)
+add_subdirectory(src)
--- /dev/null
+Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. All rights reserved.
+
+ Apache License
+ Version 2.0, January 2004
+ http://www.apache.org/licenses/
+
+ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+ 1. Definitions.
+
+ "License" shall mean the terms and conditions for use, reproduction,
+ and distribution as defined by Sections 1 through 9 of this document.
+
+ "Licensor" shall mean the copyright owner or entity authorized by
+ the copyright owner that is granting the License.
+
+ "Legal Entity" shall mean the union of the acting entity and all
+ other entities that control, are controlled by, or are under common
+ control with that entity. For the purposes of this definition,
+ "control" means (i) the power, direct or indirect, to cause the
+ direction or management of such entity, whether by contract or
+ otherwise, or (ii) ownership of fifty percent (50%) or more of the
+ outstanding shares, or (iii) beneficial ownership of such entity.
+
+ "You" (or "Your") shall mean an individual or Legal Entity
+ exercising permissions granted by this License.
+
+ "Source" form shall mean the preferred form for making modifications,
+ including but not limited to software source code, documentation
+ source, and configuration files.
+
+ "Object" form shall mean any form resulting from mechanical
+ transformation or translation of a Source form, including but
+ not limited to compiled object code, generated documentation,
+ and conversions to other media types.
+
+ "Work" shall mean the work of authorship, whether in Source or
+ Object form, made available under the License, as indicated by a
+ copyright notice that is included in or attached to the work
+ (an example is provided in the Appendix below).
+
+ "Derivative Works" shall mean any work, whether in Source or Object
+ form, that is based on (or derived from) the Work and for which the
+ editorial revisions, annotations, elaborations, or other modifications
+ represent, as a whole, an original work of authorship. For the purposes
+ of this License, Derivative Works shall not include works that remain
+ separable from, or merely link (or bind by name) to the interfaces of,
+ the Work and Derivative Works thereof.
+
+ "Contribution" shall mean any work of authorship, including
+ the original version of the Work and any modifications or additions
+ to that Work or Derivative Works thereof, that is intentionally
+ submitted to Licensor for inclusion in the Work by the copyright owner
+ or by an individual or Legal Entity authorized to submit on behalf of
+ the copyright owner. For the purposes of this definition, "submitted"
+ means any form of electronic, verbal, or written communication sent
+ to the Licensor or its representatives, including but not limited to
+ communication on electronic mailing lists, source code control systems,
+ and issue tracking systems that are managed by, or on behalf of, the
+ Licensor for the purpose of discussing and improving the Work, but
+ excluding communication that is conspicuously marked or otherwise
+ designated in writing by the copyright owner as "Not a Contribution."
+
+ "Contributor" shall mean Licensor and any individual or Legal Entity
+ on behalf of whom a Contribution has been received by Licensor and
+ subsequently incorporated within the Work.
+
+ 2. Grant of Copyright License. Subject to the terms and conditions of
+ this License, each Contributor hereby grants to You a perpetual,
+ worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+ copyright license to reproduce, prepare Derivative Works of,
+ publicly display, publicly perform, sublicense, and distribute the
+ Work and such Derivative Works in Source or Object form.
+
+ 3. Grant of Patent License. Subject to the terms and conditions of
+ this License, each Contributor hereby grants to You a perpetual,
+ worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+ (except as stated in this section) patent license to make, have made,
+ use, offer to sell, sell, import, and otherwise transfer the Work,
+ where such license applies only to those patent claims licensable
+ by such Contributor that are necessarily infringed by their
+ Contribution(s) alone or by combination of their Contribution(s)
+ with the Work to which such Contribution(s) was submitted. If You
+ institute patent litigation against any entity (including a
+ cross-claim or counterclaim in a lawsuit) alleging that the Work
+ or a Contribution incorporated within the Work constitutes direct
+ or contributory patent infringement, then any patent licenses
+ granted to You under this License for that Work shall terminate
+ as of the date such litigation is filed.
+
+ 4. Redistribution. You may reproduce and distribute copies of the
+ Work or Derivative Works thereof in any medium, with or without
+ modifications, and in Source or Object form, provided that You
+ meet the following conditions:
+
+ (a) You must give any other recipients of the Work or
+ Derivative Works a copy of this License; and
+
+ (b) You must cause any modified files to carry prominent notices
+ stating that You changed the files; and
+
+ (c) You must retain, in the Source form of any Derivative Works
+ that You distribute, all copyright, patent, trademark, and
+ attribution notices from the Source form of the Work,
+ excluding those notices that do not pertain to any part of
+ the Derivative Works; and
+
+ (d) If the Work includes a "NOTICE" text file as part of its
+ distribution, then any Derivative Works that You distribute must
+ include a readable copy of the attribution notices contained
+ within such NOTICE file, excluding those notices that do not
+ pertain to any part of the Derivative Works, in at least one
+ of the following places: within a NOTICE text file distributed
+ as part of the Derivative Works; within the Source form or
+ documentation, if provided along with the Derivative Works; or,
+ within a display generated by the Derivative Works, if and
+ wherever such third-party notices normally appear. The contents
+ of the NOTICE file are for informational purposes only and
+ do not modify the License. You may add Your own attribution
+ notices within Derivative Works that You distribute, alongside
+ or as an addendum to the NOTICE text from the Work, provided
+ that such additional attribution notices cannot be construed
+ as modifying the License.
+
+ You may add Your own copyright statement to Your modifications and
+ may provide additional or different license terms and conditions
+ for use, reproduction, or distribution of Your modifications, or
+ for any such Derivative Works as a whole, provided Your use,
+ reproduction, and distribution of the Work otherwise complies with
+ the conditions stated in this License.
+
+ 5. Submission of Contributions. Unless You explicitly state otherwise,
+ any Contribution intentionally submitted for inclusion in the Work
+ by You to the Licensor shall be under the terms and conditions of
+ this License, without any additional terms or conditions.
+ Notwithstanding the above, nothing herein shall supersede or modify
+ the terms of any separate license agreement you may have executed
+ with Licensor regarding such Contributions.
+
+ 6. Trademarks. This License does not grant permission to use the trade
+ names, trademarks, service marks, or product names of the Licensor,
+ except as required for reasonable and customary use in describing the
+ origin of the Work and reproducing the content of the NOTICE file.
+
+ 7. Disclaimer of Warranty. Unless required by applicable law or
+ agreed to in writing, Licensor provides the Work (and each
+ Contributor provides its Contributions) on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ implied, including, without limitation, any warranties or conditions
+ of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+ PARTICULAR PURPOSE. You are solely responsible for determining the
+ appropriateness of using or redistributing the Work and assume any
+ risks associated with Your exercise of permissions under this License.
+
+ 8. Limitation of Liability. In no event and under no legal theory,
+ whether in tort (including negligence), contract, or otherwise,
+ unless required by applicable law (such as deliberate and grossly
+ negligent acts) or agreed to in writing, shall any Contributor be
+ liable to You for damages, including any direct, indirect, special,
+ incidental, or consequential damages of any character arising as a
+ result of this License or out of the use or inability to use the
+ Work (including but not limited to damages for loss of goodwill,
+ work stoppage, computer failure or malfunction, or any and all
+ other commercial damages or losses), even if such Contributor
+ has been advised of the possibility of such damages.
+
+ 9. Accepting Warranty or Additional Liability. While redistributing
+ the Work or Derivative Works thereof, You may choose to offer,
+ and charge a fee for, acceptance of support, warranty, indemnity,
+ or other liability obligations and/or rights consistent with this
+ License. However, in accepting such obligations, You may act only
+ on Your own behalf and on Your sole responsibility, not on behalf
+ of any other Contributor, and only if You agree to indemnify,
+ defend, and hold each Contributor harmless for any liability
+ incurred by, or claims asserted against, such Contributor by reason
+ of your accepting any such warranty or additional liability.
+
+ END OF TERMS AND CONDITIONS
+
+ APPENDIX: How to apply the Apache License to your work.
+
+ To apply the Apache License to your work, attach the following
+ boilerplate notice, with the fields enclosed by brackets "[]"
+ replaced with your own identifying information. (Don't include
+ the brackets!) The text should be enclosed in the appropriate
+ comment syntax for the file format. We also recommend that a
+ file or class name and description of purpose be included on the
+ same "printed page" as the copyright notice for easier
+ identification within third-party archives.
+
+ Copyright [yyyy] [name of copyright owner]
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
--- /dev/null
+Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. All rights reserved.
\ No newline at end of file
--- /dev/null
+#! /bin/sh
+# Checking special mode booting.
+# * Charging mode: Turn the phone on with the charger connection.
+# * FOTA mode: Firmware update On-The-Air
+#
+
+for i in `/bin/cat /proc/cmdline` ; do
+ echo $i
+ if [ "$i" = "charger_detect_boot" ] || [ "$i" = "fota_update_boot" ]; then
+ exit 0
+ fi
+done
+exit 1
--- /dev/null
+default-files-aquila for Debian
+-------------------------------
+
+<possible notes regarding this package - if none, delete this file>
+
+ -- unknown <youmin.ha@samsung.com> Mon, 16 Nov 2009 15:13:09 +0900
--- /dev/null
+system-plugin-slp (0.0.1-14) unstable; urgency=low
+
+ * Add resizing ext4 partitions on the first boot.
+ * Git: slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-14
+
+ -- Wonil Choi <wonil22.choi@samsung.com> Thu, 29 Mar 2012 14:47:21 +0900
+
+system-plugin-slp (0.0.1-13) unstable; urgency=low
+
+ * Remove /opt/drvier directory and files
+ - instead of /opt/driver, /lib/modules is used.
+ * spec file update for obs packaging
+ * change the path of fw_printenv
+ * Git: slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-13
+
+ -- Wonil Choi <wonil22.choi@samsung.com> Wed, 28 Mar 2012 18:26:22 +0900
+
+system-plugin-slp (0.0.1-12) unstable; urgency=low
+
+ * Remove mdev: udev can work same jobs
+ * Git: slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-12
+
+ -- Wonil Choi <wonil22.choi@samsung.com> Wed, 28 Mar 2012 13:40:23 +0900
+
+system-plugin-slp (0.0.1-11) unstable; urgency=low
+
+ * Revert the last change
+ * Git: slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-11
+
+ -- Wonil Choi <wonil22.choi@samsung.com> Tue, 27 Mar 2012 09:57:48 +0900
+
+system-plugin-slp (0.0.1-10) unstable; urgency=low
+
+ * copying modules instead of symlinks due to duplucated wifi insmod
+ * Git: slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-10
+
+ -- Wonil Choi <wonil22.choi@samsung.com> Tue, 20 Mar 2012 19:24:35 +0900
+
+system-plugin-slp (0.0.1-9) unstable; urgency=low
+
+ * Revert the last change.
+ * Git: slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-9
+
+ -- Wonil Choi <wonil22.choi@samsung.com> Mon, 19 Mar 2012 19:56:06 +0900
+
+system-plugin-slp (0.0.1-8) unstable; urgency=low
+
+ * Remove mdev: udev can work same jobs.
+ * Git: slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-8
+
+ -- Wonil Choi <wonil22.choi@samsung.com> Tue, 13 Mar 2012 17:19:17 +0900
+
+system-plugin-slp (0.0.1-7) unstable; urgency=low
+
+ * Add to mount modules.img to fstab for driver modules(ko)
+ * Add to make symlinks for driver modules(ko)
+ * Git: slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-7
+
+ -- Wonil Choi <wonil22.choi@samsung.com> Wed, 07 Mar 2012 18:04:55 +0900
+
+system-plugin-slp (0.0.1-6) unstable; urgency=low
+
+ * Remove alsa scenario copy in rc.firstboot
+ * Git: slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-6
+
+ -- KwangHui Cho <kwanghui.cho@samsung.com> Wed, 22 Feb 2012 08:58:42 +0900
+
+system-plugin-slp (0.0.1-5) unstable; urgency=low
+
+ * Fix build and clean error
+ * Git: slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-5
+
+ -- Wonil Choi <wonil22.choi@samsung.com> Fri, 03 Feb 2012 09:57:58 +0900
+
+system-plugin-slp (0.0.1-4) unstable; urgency=low
+
+ * Code cleanup: remove an unnecesary file
+ * Git: slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-4
+
+ -- Wonil Choi <wonil22.choi@samsung.com> Thu, 02 Feb 2012 16:10:06 +0900
+
+system-plugin-slp (0.0.1-3) unstable; urgency=low
+
+ * Code cleanup: remove unnecesary and commented codes
+ * Git: slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-3
+
+ -- Wonil Choi <wonil22.choi@samsung.com> Thu, 22 Dec 2011 18:25:01 +0900
+
+system-plugin-slp (0.0.1-2) unstable; urgency=low
+
+ * Release 0.0.1-2
+ * Boot modem on background to reduce booting time
+ * Git: 165.213.180.234:slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-2
+
+ -- Yeongil Jang <yg0577.jang@samsung.com> Thu, 17 Nov 2011 15:09:29 +0900
+
+system-plugin-slp (0.0.1-1) unstable; urgency=low
+
+ * Initial release. Copied from system-plugin-sdk
+ * Git: 165.213.180.234:slp/pkgs/s/system-plugin-slp
+ * Tag: system-plugin-slp_0.0.1-1
+
+ -- Hyunsuk Oh <hs1120.oh@samsung.com> Mon, 31 Oct 2011 16:50:38 +0900
--- /dev/null
+Source: system-plugin-slp
+Section: misc
+Priority: extra
+Maintainer: Wonil Choi <wonil22.choi@samsung.com>
+Uploaders: Wonil Choi <wonil22.choi@samsung.com>, KwangHui Cho <kwanghui.cho@samsung.com>
+Build-Depends: debhelper (>= 5)
+Standards-Version: 3.7.2
+
+Package: system-plugin-slp
+Architecture: armel
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Pre-Depends: base-files, sysvinit
+Replaces: base-files, sysvinit
+Description: system-plugin for Clean SDK
+ system-plugin for Clean SDK
--- /dev/null
+This is system-plugin-slp, written and maintained by Jongwoo Chae <jongwoo.chae@samsung.com>
+on Wed Aug 18 16:08:53 KST 2010.
+
+Copyright Holder: unknown
+
+License:
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this package; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL'.
--- /dev/null
+etc/.info
+etc/.info/system.info
+etc/.info/rootfs.info
--- /dev/null
+#!/bin/sh
+
+set -e
+
+if [ "$1" = "configure" ]; then
+ cp -af /usr/share/system-plugin-slp/* /
+fi
+
--- /dev/null
+#!/usr/bin/make -f
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+PREFIX ?=
+DATADIR ?= /opt
+
+configure: configure-stamp
+configure-stamp:
+ dh_testdir
+ # Add here commands to configure the package.
+ touch configure-stamp
+
+build: build-stamp
+
+build-stamp: configure-stamp
+ dh_testdir
+
+ # Add here commands to compile the package.
+
+ for f in `find $(CURDIR)/debian/ -name "*.in"`; do \
+ cat $$f > $${f%.in}; \
+ sed -i -e "s#@PREFIX@#$(PREFIX)#g" $${f%.in}; \
+ done
+ touch $@
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp configure-stamp
+
+ # Add here commands to clean up after the build process.
+# -$(MAKE) clean
+
+ for f in `find $(CURDIR)/debian/ -name "*.in"`; do \
+ rm -f $${f%.in}; \
+ done
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ mkdir -p $(CURDIR)/debian/tmp$(PREFIX)
+ mkdir -p debian/tmp/usr/share/system-plugin-slp
+ cp -a $(CURDIR)/etc debian/tmp/usr/share/system-plugin-slp
+ cp -a $(CURDIR)/usr debian/tmp
+ cp -a $(CURDIR)/bin debian/tmp
+ cp -a $(CURDIR)/lib debian/tmp
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs
+ dh_installdocs
+ dh_installexamples
+ dh_install --sourcedir=debian/tmp
+# dh_installmenu
+# dh_installdebconf
+# dh_installlogrotate
+# dh_installemacsen
+# dh_installpam
+# dh_installmime
+# dh_python
+# dh_installinit
+# dh_installcron
+# dh_installinfo
+ dh_installman
+ dh_link
+# dh_strip
+ dh_compress
+ dh_fixperms
+# dh_perl
+ dh_makeshlibs
+ dh_installdeb
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure
--- /dev/null
+@PREFIX@/*
--- /dev/null
+#<file system> <mount point> <type> <options> <dump> <pass>
+none /proc proc defaults 0 0
+#none /dev/pts devpts mode=0622 0 0
+tmpfs /tmp tmpfs defaults 0 0
+/opt/var /var bind bind 0 0
+none /sys sysfs defaults 0 0
+
+# For new partition - 2012/08
+#/dev/mmcblk0p1 /csa ext4 defaults 0 2
+/dev/mmcblk0p1 /boot vfat defaults 0 2
+#/dev/mmcblk0p4 /mnt/csc ext4 defaults,noauto 0 2
+/dev/mmcblk0p2 / ext4 defaults 0 1
+/dev/mmcblk0p3 /opt ext4 defaults 0 2
+/dev/mmcblk0p4 /opt/usr ext4 defaults 0 2
+#/boot/modules.img /lib/modules ext4 loop 0 0
--- /dev/null
+FTA HW VERSION : REV0.0
+FTA SW VERSION : TRAST.001
--- /dev/null
+#System startup
+si::sysinit:/etc/rc.d/rc.sysinit
+net::once:/etc/rc.d/rc.network
+
+id:1:initdefault:
+
+# Console
+#ttyS0::respawn:/bin/sh
+#command was changed from getty in busybox to agetty in coreutils
+con:12345:respawn:/sbin/agetty -L 115200 ttySAC2 vt100
+#::askfirst:/bin/sh
+
+#Logging , move to rc.sysinit
+#::sysinit:/bin/cp -rf /var/log/messages /var/log/messages.prev
+#::sysinit:/bin/cp -rf /var/log/messages.0 /var/log/messages.0.prev
+#::sysinit:/bin/touch /var/log/messages
+#::once:/sbin/syslogd
+#::once:/sbin/klogd
+
+#System shutdown
+#ca:12345:ctrlaltdel:/sbin/reboot
+bye:06:wait:/etc/rc.d/rc.shutdown
+rebt:6:wait:/sbin/reboot -d -f -i
+
+# Frambuffer Console
+#ttyS1::respawn:/bin/sh
+#tty1::respawn:/bin/sh
+#tty2::respawn:/bin/sh
--- /dev/null
+# Example mtools.conf files. Uncomment the lines which correspond to
+# your architecture and comment out the "SAMPLE FILE" line below
+# SAMPLE FILE
+
+# # Linux floppy drives
+# drive a: file="/dev/fd0" exclusive
+# drive b: file="/dev/fd1" exclusive
+
+# # First SCSI hard disk partition
+# drive c: file="/dev/sda1"
+
+# # First IDE hard disk partition
+# drive c: file="/dev/hda1"
+
+# # dosemu floppy image
+# drive m: file="/var/lib/dosemu/diskimage"
+
+# # dosemu hdimage
+# drive n: file="/var/lib/dosemu/diskimage" offset=3840
+
+# # Atari ramdisk image
+# drive o: file="/tmp/atari_rd" offset=136
+
+# # ZIP disk for Solaris:
+# Drive X is ZIP-100 at target 5
+# drive X: file="/dev/rdsk/c0t5d0s2" partition=4 scsi=1 nodelay
+
+# # ZIP disk for SunOS:
+# # Zip drive is at target 5, which default kernel calls tape st1 !!
+# drive Y: file="/dev/rsd5c" partition=4 scsi=1 nodelay
+
+# # autoselect zip drive/floppy on HP-UX 9/10
+# drive a: file="/dev/rdsk/c201d5" exclusive partition=4
+# drive a: file="/dev/rdsk/c201d5s0" exclusive partition=4
+# drive a: file="/dev/rfloppy/c201d0s0" exclusive
+
+# A/UX target 5 on 1st scsi bus jaz or zip
+# drive X: file="/dev/rdsk/c105d0s31" partition=4
+
+
+# Some examples for BeOS.
+# floppy drive. hardcoded in devices.c, so no real need to define it here
+#drive a: file="/dev/floppy_disk" exclusive
+# ZIP drive on SCSI ID 6
+#drive z: file="/dev/scsi_disk_060" offset=16384 fat_bits=16
+
+# SCO Unix 3.2v4
+# # Floppy disk drives
+#
+# drive a: file="/dev/install" exclusive
+# drive b: file="/dev/install1" exclusive
+#
+# # SCSI hard disk partitions
+#
+# drive c: file="/dev/dsk/0sC"
+# drive d: file="/dev/dsk/0sD"
+# drive e: file="/dev/dsk/0sE"
+drive f: file="/dev/mmcblk0p1"
+# drive g: file="/dev/dsk/0sG"
+# drive h: file="/dev/dsk/0sH"
+
+mtools_skip_check=1
+
+# # uncomment the following line to display all file names in lower
+# # case by default
+# mtools_lower_case=1
--- /dev/null
+#!/bin/sh
+
+#/sbin/ldconfig -f /opt/etc/ld.so.conf -C /opt/etc/ld.so.cache
+/sbin/ldconfig
+
+# for /etc/.info/system.info
+/bin/sysinfo
+
+#Check machine is SLP7_C210
+MACHINE=`grep Hardware /proc/cpuinfo|cut -d ":" -f 2|tr -d " "`
+if [ $MACHINE == "SLP7_C210" ];then
+ ln -s /opt/etc/X11/xorg.conf.d.slp7 /opt/etc/X11/xorg.conf.d
+else
+ #Check machine is SLP10_C210
+ if [ $MACHINE == "SLP10_C210" ];then
+ ln -s /opt/etc/X11/xorg.conf.d.slp10 /opt/etc/X11/xorg.conf.d
+ else
+ ln -s /opt/etc/X11/xorg.conf.d.default /opt/etc/X11/xorg.conf.d
+ fi
+fi
+
+
+if [ -e /opt/system/csc/.factoryreset ]; then
+ rm -f /opt/system/csc/.factoryreset
+fi
+sync
--- /dev/null
+#!/bin/sh
+
+export DISPLAY=:0
+killall power_manager
+killall -9 udevd
+#killall -9 system_server
+killall -9 xinit
+
+rm -rf /tmp/vip/*
+rm -rf /tmp/permanent/*
+
+echo "Run Shutdown animation..."
+nice -n -15 /usr/bin/boot-animation --offmsg " " --clear &
+sleep 1
+
+echo "Stopping indicator..."
+killall -9 indicator
+
+# factory resetting...
+# flag set by factory-reset.sh
+if [ -f /opt/.factoryreset ]; then
+ /usr/bin/run-factory-reset.sh
+fi
+
+
--- /dev/null
+#!/bin/sh
+
+# Color set for ANSI TERM
+_R='\033[0;31;1m' #Red
+_G='\033[0;32;1m' #Green
+_Y='\033[0;33;1m' #Yellow
+C_='\033[0m' #Color off
+
+
+echo -e "[${_G}rc.sysinit : script starts${C_}]"
+echo -e "[${_G}mount...${C_}]"
+mount -t proc none /proc
+mount -t tmpfs tmpfs /tmp
+mount -t sysfs none /sys
+mount -t tmpfs runfs /run
+mkdir -p /dev/pts
+mkdir -p /dev/shm
+mount -t tmpfs none /dev/shm
+mount -t devpts devpts /dev/pts
+mount -t debugfs none /sys/kernel/debug
+
+mknod /dev/null c 1 3
+mknod /dev/mmcblk0 b 179 0
+mknod /dev/mmcblk0p3 b 179 6
+
+# mount opt partition
+mount -t ext4 /dev/mmcblk0p3 /opt
+
+echo -e "[${_G}udev start${C_}]"
+/sbin/udevd --daemon
+/sbin/udevadm trigger
+
+if [ ! -e /opt/etc/.firstboot ]; then
+ umount /opt
+# find rootfs partition for resizing and remounting
+ for param in `cat /proc/cmdline`; do
+ if [ "${param:0:5}" = "root=" ]; then
+ rootfs_part=${param#root=}
+ break
+ fi
+ done
+ ext4_parts=`grep ext4 /etc/fstab | grep mmcblk0 | awk '{print $1};'`
+ for part in $ext4_parts; do
+# check all RW partitions in order to resize it withtout mounting excepting rootfs.
+ if [ "$part" != "$rootfs_part" ]; then
+ e2fsck -y -f $part
+ fi
+ echo "resize $part"
+ resize2fs $part
+ done
+
+ mount -t ext4 /dev/mmcblk0p3 /opt
+ echo -e "[${_Y}rc.firstboot${C_}]"
+ /etc/rc.d/rc.firstboot
+ touch /opt/etc/.firstboot
+ sync
+fi
+
+mount /var
+
+# check special booting mode.
+/bin/check-booting-mode.sh
+if [ $? -eq 0 ]; then
+ echo -e "${_R}[ Special Booting mode ]${C_}"
+ for i in /etc/rc.d/rc2.d/*; do
+ echo -e "${_G}[${i} start]${C_}"
+ $i start
+ done
+ exit 0
+fi
+
+# mount all partitions
+mount -a
+mount --bind /run/ /var/run/
+
+echo -e "[${_G}create base directory in /opt, /var${C_}]"
+# construct directory hierarchy
+mkdir -p /opt/var/log/apt
+mkdir -p /opt/var/lib
+mkdir -p /opt/var/cache
+
+
+echo -e "[${_G}set device node perm & security${C_}]"
+# Set device node permissions for security
+chown 0:6501 /dev/video1
+chown 0:6501 /dev/s3c-jpg
+#chmod 666 /dev/pvrsrvkm
+chown 0:6509 /dev/log_main
+chown 0:6509 /dev/log_events
+chown 0:6509 /dev/log_radio
+chown :audio /dev/snd/
+chmod 775 /dev/snd/
+chown :audio /dev/snd/controlC0
+chown :audio /dev/snd/pcmC0D0p
+chown :audio /dev/snd/pcmC0D1p
+chown :audio /dev/snd/pcmC0D2p
+chown :audio /dev/snd/pcmC0D3p
+chown :audio /dev/snd/timer
+chown 0:6508 /dev/snd/pcmC0D0c
+chown 0:6508 /dev/snd/pcmC0D1c
+chown 0:6508 /dev/snd/pcmC0D2c
+chown 0:6508 /dev/snd/pcmC0D3c
+chown 0:6510 /dev/s3c-mfc
+chown 0:6510 /dev/video5
+chown 0:6510 /dev/video6
+chmod 666 /dev/random
+chmod 666 /dev/urandom
+chown :video /dev/fb0
+chown :video /dev/video0
+chown :video /dev/video2
+chown :video /dev/video3
+chown :video /dev/s3c-mem
+chown :6512 /dev/radio0
+chown :6702 /sys/class/backlight/*/brightness
+# change node's owner for torch light
+chown :6703 /sys/class/leds/leds-torch/brightness
+chmod 664 /sys/class/backlight/*/brightness
+# change files permission for 3D application
+chmod 666 /dev/ump
+chmod 666 /dev/mali
+chmod 666 /dev/slp_global_lock
+
+# Set gst-openmax configure file
+export OMX_CONFIG=/opt/etc/gst-openmax.conf
+
+echo -e "[${_G}make gstreamer registery${C_}]"
+# Make gst registry
+export GST_REGISTRY=/opt/etc/.gstreamer-0.10/registry.bin.arm
+gst-inspect 1> /dev/null
+chmod 655 /opt/etc/.gstreamer-0.10
+chmod 644 /opt/etc/.gstreamer-0.10/registry.bin.arm
+
+# Modem power on
+echo -e "[${_Y}modem power on${C_}]"
+ln -s /boot/modem.bin /modem/modem.bin
+/usr/bin/xmm6262-boot &
+
+#touch sensor start
+echo 1 > /sys/class/i2c-adapter/i2c-2/2-004a/touchstart
+
+if [ -e /opt/etc/.coredump ]; then
+ # enable coredump
+ echo "/opt/usr/share/crash/core/%p_%s_%e.core" > /proc/sys/kernel/core_pattern
+ ulimit -c unlimited
+else
+ echo "core dump disabled"
+ ulimit -c 0
+fi
+
+echo -e "[${_G}run profile${C_}]"
+# Run profile
+. /etc/profile
+
+/usr/bin/press 1 # wait input to stop running scripts
+if [ $? -eq 0 ]; then
+ echo "script is stopped"
+ # prepare usbnet before exit
+ insmod /usr/driver/g_ether.ko
+ sleep 1
+ ifconfig usb0 192.168.129.3 netmask 255.255.255.0
+ # Run all rc0 scripts
+ for i in /etc/rc.d/rc0.d/*; do
+ echo -e "[${_G}${i} start${C_}]"
+ $i start
+ done
+else
+ # Run all rc3 scripts
+ echo -e "[${_G}run all rc3 scripts${C_}]"
+ echo "normal boot"
+ for i in /etc/rc.d/rc3.d/*; do
+ echo -e "[${_G}${i} start${C_}]"
+ $i start
+ done
+fi
+
+# change owner and group about /opt/media directory
+chown 5000:5000 /opt/media
+
+echo -e "[${_G}set cpufreq governor${C_}]"
+# Set default cpufreq governor
+echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+
+# symbolic link
+if [ ! -e /opt/apps ]; then
+ echo -e "[${_G}link /opt/apps -> /opt/media/apps${C_}]"
+ ln -s /opt/media/apps /opt/apps
+fi
+
+# inhouse home-directory
+chown 5000:5000 /home/inhouse
+
--- /dev/null
+#!/usr/bin/perl -w
+#
+# Generate systemd mount units based on information from fstab file.
+#
+# Copyright (C) 2012 Samsung Electronics
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# Author: Łukasz Stelmach <l.stelmach@samsung.com>
+#
+use strict;
+use Cwd 'abs_path';
+
+my $out_dir = pop @ARGV;
+my ($fs_dev, $fs_dir, $fs_type, $fs_opts, $fs_dump, $fs_pass);
+
+sub name_from_path($) {
+ my $dev=shift;
+ $dev =~ s:/+:-:g;
+
+ if ($dev=~m/^-$/) {
+ return $dev;
+ }
+
+ $dev =~ s/^-|-$//g;
+ return $dev;
+}
+
+while(<>) {
+ chomp;
+ ($fs_dev, $fs_dir, $fs_type, $fs_opts, $fs_dump, $fs_pass)=split;
+ next unless ($fs_dev=~m/mmcblk/);
+ next unless ($fs_type=~m/ext[234]/);
+
+ my $fs_tab=abs_path $ARGV;
+ my $unit_name=$out_dir ."/". name_from_path($fs_dir) . ".mount";
+ my $devname=name_from_path $fs_dev;
+ my ($after,$req,$wants);
+ if ($fs_dir eq "/") {
+ $after = "fsck-root.service resize2fs-root.service";
+ $req = "fsck-root.service";
+ $wants = "resize2fs-root.service";
+ } else {
+ $after = "fsck\@$devname.service resize2fs\@$devname.service";
+ $req = "fsck\@$devname.service";
+ $wants = "resize2fs\@$devname.service";
+ }
+
+ my $unit=<<EOF;
+# Automaticall generated by mount-generator.pl
+
+[Unit]
+# FIXME: Is this required?
+#SourcePath=$fs_tab
+DefaultDependencies=no
+Before=local-fs.target
+Requires=$req
+After=local-fs-pre.target $after
+Wants=$wants
+
+[Mount]
+What=$fs_dev
+Where=$fs_dir
+Type=$fs_type
+Options=$fs_opts
+EOF
+ open (UNIT, ">", $unit_name) || die $!;
+ print UNIT $unit,"\n";
+ close UNIT;
+}
--- /dev/null
+Name: system-plugin-slp
+Summary: system-plugin for Clean SDK
+Version: 0.0.1
+License: Apache-2.0
+Group: System/Base
+Release: 64
+ExclusiveArch: %arm
+Source: %{name}-%{version}.tar.gz
+BuildRequires: cmake
+BuildRequires: perl
+BuildRequires: pkgconfig(libudev)
+Requires: udev
+Requires: sysvinit
+
+%description
+Startup files
+
+%prep
+%setup -q
+
+%build
+cmake . -DCMAKE_INSTALL_PREFIX=%{_prefix} -DSYSCONFDIR=%{_sysconfdir}
+make %{?_smp_mflags}
+./mount-generator.pl etc/fstab usr/lib/systemd/system
+
+%install
+%make_install
+
+cp -a etc usr bin %{buildroot}
+
+mkdir -p %{buildroot}/usr/lib/systemd/system/local-fs.target.wants
+for mount in usr/lib/systemd/system/*.mount; do
+ if grep -q '^Options[[:space:]]*=.*noauto' $mount; then continue; fi
+ m=$(basename $mount)
+ ln -s ../$m %{buildroot}/usr/lib/systemd/system/local-fs.target.wants/$m
+done
+mkdir -p %{buildroot}/%{_libdir}/systemd/system/local-fs.target.wants
+ln -s ../resize2fs-root.service %{buildroot}/%{_libdir}/systemd/system/local-fs.target.wants
+
+mkdir -p %{buildroot}/lib/modules
+
+%files
+/bin/with-dev-root-do
+/etc/fstab
+/etc/fta_version.txt
+/etc/inittab
+/etc/mtools.conf
+/etc/rc.d/rc.firstboot
+/etc/rc.d/rc.shutdown
+/etc/rc.d/rc.sysinit
+/usr/bin/save_blenv
+/bin/check-booting-mode.sh
+/usr/lib/systemd/system/resize2fs-root.service
+/usr/lib/systemd/system/resize2fs@.service
+/usr/lib/systemd/system/*.mount
+/usr/lib/systemd/system/local-fs.target.wants/*.mount
+/usr/lib/systemd/system/local-fs.target.wants/resize2fs-root.service
+/lib/modules
--- /dev/null
+INCLUDE(FindPkgConfig)
+pkg_search_module(libudev REQUIRED libudev)
+add_executable(with-dev-root-do with-dev-root-do.c)
+target_link_libraries(with-dev-root-do ${libudev_LIBRARIES})
+install(PROGRAMS with-dev-root-do DESTINATION /bin)
--- /dev/null
+/* -*- c-basic-offset: 8 -*- */
+/*
+ * Query udev for the real name of the device currently mounted
+ * as root filesystem and use it as an argument for a command.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Author: Łukasz Stelmach <l.stelmach@samsung.com>
+ *
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <libudev.h>
+#include <stdlib.h>
+#include <string.h>
+
+void usage() {
+ fprintf(stderr, "Usage:\n\n with-dev-root-do <cmdline>\n\n");
+ fprintf(stderr, "Execute the cmdline with the real name of the device currently mounted\n");
+ fprintf(stderr, "as root file-system appended at the end or substituted for '{}'. Examples\n");
+ fprintf(stderr, "assuming /dev/sda1 holds root file-system:\n\n");
+ fprintf(stderr, " with-dev-root-do /sbin/fsck\n\n");
+ fprintf(stderr, "runs \"/sbin/fsck /dev/sda1\"\n\n");
+ fprintf(stderr, " with-dev-root-do /sbin/e2image {} /tmp/root.e2img\n\n");
+ fprintf(stderr, "runs \"/sbin/e2image /dev/sda1 /tmp/root.e2img\"\n");
+}
+
+const char* find_node() {
+ struct stat s;
+ struct udev* udev=NULL;
+ struct udev_device *udev_device = NULL;
+ const char* node=NULL;
+
+ if(stat("/", &s) < 0) {
+ perror("stat");
+ return NULL;
+ }
+
+ if (s.st_dev == 0)
+ return NULL;
+
+ udev=udev_new();
+ if(udev==NULL) {
+ fprintf(stderr, "I don't remember.\n");
+ return NULL;
+ }
+
+ udev_device=udev_device_new_from_devnum(udev, 'b', s.st_dev);
+ if(udev_device==NULL) {
+ fprintf(stderr, "Where do we come from?\n");
+ return NULL;
+ }
+
+ node=udev_device_get_devnode(udev_device);
+ if(node==NULL) {
+ fprintf(stderr, "Where are we going to?\n");
+ return NULL;
+ }
+ return node;
+}
+
+int main(int argc, char* argv[]) {
+ const char** cmdline;
+ const char* node;
+ int i;
+ int placeholder_found=0;
+
+ if(argc < 2) {
+ usage();
+ fprintf(stderr, "\nI don't want to be alone.\n");
+ exit(1);
+ }
+
+ cmdline=malloc((1+argc) * sizeof(char*));
+ if(cmdline==NULL) {
+ perror("malloc");
+ exit(1);
+ }
+ memset((char*)cmdline, 0, (1+argc) * sizeof(char*));
+
+ if((node=find_node())==NULL) {
+ free(cmdline);
+ exit(1);
+ }
+
+ for (i=0; i < argc && argv[i+1]; i++) {
+ if(strncmp("{}", argv[i+1], 3)==0) {
+ placeholder_found=1;
+ cmdline[i] = node;
+ } else
+ cmdline[i] = argv[i+1];
+ }
+
+ if (!placeholder_found)
+ cmdline[i]=node;
+
+ execv(cmdline[0], (char**) cmdline);
+ return 1;
+}
--- /dev/null
+#!/bin/sh
+#
+# save_blenv: Save env variables of bootloader
+# Usage) save_blenv VARIABLE_NAME VALUE
+#
+# This script is for saving variables of bootloader which is required to be
+# shared between bootloader and platform. (ex) display brightness level)
+#
+# Manufacturer SHOULD modify this file adapted to their target and bootloader.
+# (If there is no shared variables, this file can be removed.)
+
+usage () {
+ echo "Not supported variable(s) or wrong usage"
+ echo "Usage: $0 NAME VALUE"
+ exit 1
+}
+
+_val="$2"
+case "$1" in
+# Supported variables for SLP : usbpath, uartpath, SLP_LCD_BRIGHT
+ usbpath | uartpath)
+ case "$2" in
+ AP | ap)
+ _val="ap"
+ ;;
+ CP | cp)
+ _val="cp"
+ ;;
+ *)
+ usage
+ ;;
+ esac
+ ;;
+ SLP_LCD_BRIGHT)
+ if [ "z$2" == "z" ]; then
+ usage
+ fi
+ ;;
+# NOT SUPPOTED
+ *)
+ usage
+ ;;
+esac
+
+# This is for uboot. If you don't use uboot, change following command.
+/usr/bin/fw_setenv $1 $_val
+
+exit 0
+
--- /dev/null
+[Unit]
+Description=Resize of File System on the Root Device
+DefaultDependencies=no
+Requires=fsck-root.service
+After=fsck-root.service
+Before=remount-rootfs.service local-fs.target shutdown.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=no
+ExecStartPre=/bin/mount -o remount,rw /
+ExecStart=/bin/with-dev-root-do /sbin/resize2fs
+ExecStartPost=/bin/ln -s /dev/null /etc/systemd/system/resize2fs-root.service
+ExecStartPost=/bin/mount -o remount /
+StandardOutput=journal+console
+TimeoutSec=0
--- /dev/null
+[Unit]
+Description=Resize of File System on %f
+DefaultDependencies=no
+BindTo=%i.device
+After=fsck@%i.service
+Requires=fsck@%i.service
+Before=local-fs.target shutdown.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=no
+ExecStart=/sbin/resize2fs %f
+StandardOutput=journal+console
+TimeoutSec=0
projects / adaptation / panda / system-plugin-slp.git / commitdiff