Remove unused code

Change-Id: I037c42e95859e415ed446e1e0d225527cdf6731f
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

diff --git a/include/hal-device.h b/include/hal-device.h
deleted file mode 100644 (file)
index 38d5326..0000000
--- a/include/hal-device.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd All Rights Reserved
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-
-
-
-#ifndef __TIZEN_SYSTEM_DEVICE_H__
-#define __TIZEN_SYSTEM_DEVICE_H__
-
-#include <stdbool.h>
-#include "device-error.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/**
- * @addtogroup CAPI_SYSTEM_DEVICE_MODULE
- * @{
- */
-
-/**
- * @brief Gets the number of display devices.
- *
- * @return The number of display devices that the device provides.
- * @retval #DEVICE_ERROR_NONE                          Successful
- * @retval #DEVICE_ERROR_INVALID_PARAMETER     Invalid parameter
- *
- * @see        device_get_brightness()
- * @see device_set_brightness()
- * @see device_get_max_brightness()
- * @see device_set_brightness_from_settings()
- * @see device_set_brightness_to_settings()
- */
-int device_get_display_numbers(int* device_number);
-
-/**
- * @brief Gets the display brightness value.
- *
- * @param[in] display_index    The index of the display, it be greater than or equal to 0 and less than \n
- *                          the number of displays returned by device_get_display_numbers().\n
- *                          The index zero is always assigned to the main display.
- * @param[out] brightness      The current brightness value of the display
- *
- * @return 0 on success, otherwise a negative error value.
- * @retval #DEVICE_ERROR_NONE                          Successful
- * @retval #DEVICE_ERROR_INVALID_PARAMETER     Invalid parameter
- * @retval #DEVICE_ERROR_OPERATION_FAILED      Operation failed
- *
- * @see device_get_display_numbers()
- * @see device_set_brightness()
- * @see device_get_max_brightness()
- * @see device_set_brightness_from_settings()
- * @see device_set_brightness_to_settings()
- */
-int device_get_brightness(int display_index, int *brightness);
-
-/**
- * @brief Sets the display brightness value.
- *
- * @param[in] display_index    The index of the display, it be greater than or equal to 0 and less than \n
- *                          the number of displays returned by device_get_display_numbers().\n
- *                          The index zero is always assigned to the main display.
- * @param[in] brightness       The new brightness value to set \n
- *                                                     The maximum value can be represented by device_get_max_brightness()
- *
- * @return 0 on success, otherwise a negative error value.
- * @retval #DEVICE_ERROR_NONE                          Successful
- * @retval #DEVICE_ERROR_INVALID_PARAMETER  Invalid parameter
- * @retval #DEVICE_ERROR_OPERATION_FAILED   Operation failed
- *
- * @see device_get_display_numbers()
- * @see device_get_max_brightness()
- * @see device_get_brightness()
- * @see device_set_brightness_from_settings()
- * @see device_set_brightness_to_settings()
- */
-int device_set_brightness(int display_index, int brightness);
-
-/**
- * @brief Gets the maximum brightness value that can be set.
- *
- * @param[in] display_index    The index of the display, it be greater than or equal to 0 and less than \n
- *                          the number of displays returned by device_get_display_numbers().\n
- *                          The index zero is always assigned to the main display.
- * @param[out] max_brightness  The maximum brightness value of the display
- *
- * @return 0 on success, otherwise a negative error value.
- * @retval #DEVICE_ERROR_NONE                          Successful
- * @retval #DEVICE_ERROR_INVALID_PARAMETER     Invalid parameter
- * @retval #DEVICE_ERROR_OPERATION_FAILED      Operation failed
- *
- * @see device_get_display_numbers()
- * @see device_set_brightness()
- * @see device_get_brightness()
- * @see device_set_brightness_from_settings()
- * @see device_set_brightness_to_settings()
- */
-int device_get_max_brightness(int display_index, int *max_brightness);
-
-/**
- * @brief Sets the display brightness value from registered in settings.
- *
- * @details
- * This function set display brightness to condition in the settings.
- * if auto brightness option is enabled in setting, display's brightness will be changed automatically.
- *
- * @param[in] display_index    The index of the display, it be greater than or equal to 0 and less than \n
- *                          the number of displays returned by device_get_display_numbers().\n
- *                          The index zero is always assigned to the main display.
- *
- * @return 0 on success, otherwise a negative error value.
- * @retval #DEVICE_ERROR_NONE                          Successful
- * @retval #DEVICE_ERROR_INVALID_PARAMETER     Invalid parameter
- * @retval #DEVICE_ERROR_OPERATION_FAILED      Operation failed
- *
- * @see device_get_display_numbers()
- * @see device_get_max_brightness()
- * @see device_set_brightness()
- * @see device_get_brightness()
- * @see device_set_brightness_to_settings()
- */
-int device_set_brightness_from_settings(int display_index);
-
-/**
- * @brief Sets the display brightness value to specific display and set to variable in settings.
- *
- * @details
- * This function set given brightness value to given index of display.
- * And also brightness variable in settings will be changed to given brightness value too.
- *
- * @param[in] display_index    The index of the display, it be greater than or equal to 0 and less than \n
- *                          the number of displays returned by device_get_display_numbers().\n
- *                          The index zero is always assigned to the main display.
- * @param[in] brightness       The new brightness value to set \n
- *                                                     The maximum value can be represented by device_get_max_brightness()
- *
- * @return 0 on success, otherwise a negative error value.
- * @retval #DEVICE_ERROR_NONE                          Successful
- * @retval #DEVICE_ERROR_INVALID_PARAMETER     Invalid parameter
- * @retval #DEVICE_ERROR_OPERATION_FAILED      Operation failed
- *
- * @see device_get_display_numbers()
- * @see device_get_max_brightness()
- * @see device_set_brightness()
- * @see device_get_brightness()
- * @see device_set_brightness_from_settings()
- */
-int device_set_brightness_to_settings(int display_index, int brightness);
-
-/**
- * @brief Get brightness value of LED that placed to camera flash.
- *
- * @remarks This API is related to the following feature: %http://tizen.org/feature/camera.back.flash
- *
- * @param[out] brightness brightness value of LED (0 ~ MAX)
- *
- * @return 0 on success, otherwise a negative error value.
- * @retval #DEVICE_ERROR_NONE                          Successful
- * @retval #DEVICE_ERROR_INVALID_PARAMETER     Invalid parameter
- * @retval #DEVICE_ERROR_OPERATION_FAILED      Operation failed
- * @retval #DEVICE_ERROR_NOT_SUPPORTED         Not supported device
- */
-int device_flash_get_brightness(int *brightness);
-
-/**
- * @brief Set brightness value of LED that placed to camera flash.
- *
- * @remarks This API is related to the following feature: %http://tizen.org/feature/camera.back.flash
- *
- * @param[in] brightness brightness value of LED (0 ~ MAX)
- *
- * @return 0 on success, otherwise a negative error value.
- * @retval #DEVICE_ERROR_NONE                          Successful
- * @retval #DEVICE_ERROR_INVALID_PARAMETER     Invalid parameter
- * @retval #DEVICE_ERROR_OPERATION_FAILED      Operation failed
- * @retval #DEVICE_ERROR_NOT_SUPPORTED         Not supported device
- */
-int device_flash_set_brightness(int brightness);
-
-/**
- * @brief Get max brightness value of LED that placed to camera flash.
- *
- * @remarks
- * Brightness control does not support yet. so this function always return 1. \n
- * Set function can only use to switch on/off the flash. \n
- * Get function can only use to retrieve on/off state of flash.
- * This API is related to the following feature: %http://tizen.org/feature/camera.back.flash
- *
- * @param[out] max_brightness max brightness value of LED
- *
- * @return 0 on success, otherwise a negative error value.
- * @retval #DEVICE_ERROR_NONE                          Successful
- * @retval #DEVICE_ERROR_INVALID_PARAMETER     Invalid parameter
- * @retval #DEVICE_ERROR_OPERATION_FAILED      Operation failed
- * @retval #DEVICE_ERROR_NOT_SUPPORTED         Not supported device
- */
-int device_flash_get_max_brightness(int *max_brightness);
-
-/**
- * @brief Get total amount of physical RAM, in kilobytes
- *
- * @remarks
- *
- * @param[out] total_mem total amount of physical RAM
- *
- * @return 0 on success, otherwise a negative error value.
- * @retval #DEVICE_ERROR_NONE                          Successful
- * @retval #DEVICE_ERROR_INVALID_PARAMETER     Invalid parameter
- * @retval #DEVICE_ERROR_OPERATION_FAILED      Operation failed
- */
-int device_memory_get_total(unsigned int *total_mem);
-
-/**
- * @brief Get available amount of physical RAM, in kilobytes
- *
- * @remarks
- * Available amount is defined by following formula currently.
- * available mem = MemFree+Buffers+Cached+SwapCached-Shmem
- *
- * @param[out] avail_mem available amount of physical RAM
- *
- * @return 0 on success, otherwise a negative error value.
- * @retval #DEVICE_ERROR_NONE                          Successful
- * @retval #DEVICE_ERROR_INVALID_PARAMETER     Invalid parameter
- * @retval #DEVICE_ERROR_OPERATION_FAILED      Operation failed
- */
-int device_memory_get_available(unsigned int *avail_mem);
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif  // __TIZEN_SYSTEM_DEVICE_H__