* @param y Y co-ordinate of the current point.
*
* @see efl_gfx_path_append_close()
+ * @since 1.14
*/
-
EAPI void
efl_gfx_path_append_move_to(Efl_Gfx_Path_Command **commands, double **points,
double x, double y);
/**
- * Adds a straight line from the current position to the given endPoint.
- * After the line is drawn, the current position is updated to be at the end point of the line.
+ * Adds a straight line from the current position to the given endPoint.
+ * After the line is drawn, the current position is updated to be at the end
+ * point of the line.
+ *
+ * @note if no current position present, it draws a line to itself, basically
+ * a point.
*
- * @note if no current position present , it draws a line to itself , basically a point.
-
* @param commands command list.
* @param points point's list.
* @param x X co-ordinate of end point of the line.
* @param y Y co-ordinate of end point of the line.
*
* @see efl_gfx_path_append_move_to()
+ * @since 1.14
*/
EAPI void
efl_gfx_path_append_line_to(Efl_Gfx_Path_Command **commands, double **points,
double x, double y);
-
/**
- * Adds a quadratic Bezier curve between the current position and the
+ * Adds a quadratic Bezier curve between the current position and the
* given end point (x,y) using the control points specified by (ctrl_x, ctrl_y).
- * After the path is drawn, the current position is updated to be at the end point of the path.
+ * After the path is drawn, the current position is updated to be at the end
+ * point of the path.
*
* @param commands command list.
* @param points point's list.
* @param y Y co-ordinate of end point of the line.
* @param ctrl_x0 X co-ordinate of control point.
* @param ctrl_y0 Y co-ordinate of control point.
+ * @since 1.14
*
*/
-
EAPI void
-efl_gfx_path_append_quadratic_to(Efl_Gfx_Path_Command **commands, double **points,
- double x, double y, double ctrl_x, double ctrl_y);
+efl_gfx_path_append_quadratic_to(Efl_Gfx_Path_Command **commands,
+ double **points, double x, double y,
+ double ctrl_x, double ctrl_y);
/**
- * Same as efl_gfx_path_append_quadratic_to() api only difference is that it uses the
- * current control point to draw the bezier.
+ * Same as efl_gfx_path_append_quadratic_to() api only difference is that it
+ * uses the current control point to draw the bezier.
*
* @see efl_gfx_path_append_quadratic_to()
- *
+ * @since 1.14
*/
EAPI void
-efl_gfx_path_append_squadratic_to(Efl_Gfx_Path_Command **commands, double **points,
- double x, double y);
+efl_gfx_path_append_squadratic_to(Efl_Gfx_Path_Command **commands,
+ double **points, double x, double y);
/**
- * Adds a cubic Bezier curve between the current position and the
- * given end point (x,y) using the control points specified by (ctrl_x0, ctrl_y0), and (ctrl_x1, ctrl_y1).
- * After the path is drawn, the current position is updated to be at the end point of the path.
+ * Adds a cubic Bezier curve between the current position and the
+ * given end point (x,y) using the control points specified by
+ * (ctrl_x0, ctrl_y0), and (ctrl_x1, ctrl_y1). After the path is drawn,
+ * the current position is updated to be at the end point of the path.
*
* @param commands command list.
* @param points point's list.
* @param ctrl_x1 X co-ordinate of 2nd control point.
* @param ctrl_y1 Y co-ordinate of 2nd control point.
*
+ * @since 1.14
*/
-
EAPI void
efl_gfx_path_append_cubic_to(Efl_Gfx_Path_Command **commands, double **points,
double x, double y,
double ctrl_x1, double ctrl_y1);
/**
- * Same as efl_gfx_path_append_cubic_to() api only difference is that it uses the
- * current control point to draw the bezier.
+ * Same as efl_gfx_path_append_cubic_to() api only difference is that it uses
+ * the current control point to draw the bezier.
*
* @see efl_gfx_path_append_cubic_to()
*
+ * @since 1.14
*/
EAPI void
efl_gfx_path_append_scubic_to(Efl_Gfx_Path_Command **commands, double **points,
- double x, double y,
- double ctrl_x, double ctrl_y);
+ double x, double y, double ctrl_x, double ctrl_y);
/**
* Append an arc that connects from the current point int the point list
* @param ry radius of arc in y direction.
* @param angle x-axis rotation , normally 0.
* @param ry radius of arc in y direction.
- * @param large_arc Defines whether to draw the larger arc or smaller arc joining two point.
- * @param sweep Defines whether the arc will be drawn counter-clockwise or clockwise from current
- * point to the end point taking into account the large_arc property.
+ * @param large_arc Defines whether to draw the larger arc or smaller arc
+ * joining two point.
+ * @param sweep Defines whether the arc will be drawn counter-clockwise or
+ * clockwise from current point to the end point taking into account the
+ * large_arc property.
*
* @see efl_gfx_path_append_arc_to()
+ * @since 1.14
*/
-
EAPI void
efl_gfx_path_append_arc_to(Efl_Gfx_Path_Command **commands, double **points,
double x, double y,
Eina_Bool large_arc, Eina_Bool sweep);
/**
- * Append an arc that occupies the given rectangle, beginning at the specified start_angle
- * and extending sweep_length degrees counter-clockwise.
+ * Append an arc that occupies the given rectangle, beginning at the specified
+ * start_angle znd extending sweep_length degrees counter-clockwise.
*
- * @attention Angles are specified in degrees. Clockwise arcs can be specified using negative angles.
+ * @note Angles are specified in degrees. Clockwise arcs can be specified
+ * using negative angles.
*
- * @note This function connects the starting point of the arc to the current position if they are
- * not already connected.After the arc has been added,the current position is the last point in arc.
- * To draw a line back to the first point, use the efl_gfx_path_append_close() function.
+ * This function connects the starting point of the arc to the current
+ * position if they are not already connected.After the arc has been
+ * added,the current position is the last point in arc. To draw a line
+ * back to the first point, use the efl_gfx_path_append_close() function.
*
* @param commands command list.
* @param points point's list.
* @param y Y co-ordinate of the rectangle.
* @param w Width of the rectangle.
* @param h Height of the rectangle.
- * @param start_angle start point of the arc will be from this angle (in degrees 0 - 360).
- * @param sweep_length length of the arc from start point (in degree 0 - 360) , -ve value
- * for clockwise direction.
+ * @param start_angle start point of the arc will be from this angle
+ * (in degrees 0 - 360).
+ * @param sweep_length length of the arc from start point (in degree 0 - 360),
+ * minus value for clockwise direction.
*
* @see efl_gfx_path_append_close()
* @see efl_gfx_path_append_arc_to()
+ * @since 1.14
*/
-
EAPI void
efl_gfx_path_append_arc(Efl_Gfx_Path_Command **commands, double **points,
double x, double y, double w, double h,
double start_angle,double sweep_length);
-
/**
* Append the given rectangle with rounded corner to the path.
*
- * The xr and yr arguments specify the radii of the ellipses defining the corners of the rounded rectangle.
+ * The xr and yr arguments specify the radii of the ellipses defining the
+ * corners of the rounded rectangle.
*
- * @note xr and yr are specified in percentage of half the rectangle's width and height respectively,
- * and should be in the range 0.0 to 100.0.
+ * @note xr and yr are specified in percentage of half the rectangle's width
+ * and height respectively, and should be in the range 0.0 to 100.0.
*
- * @attention if xr and yr are 0 , then it will draw a rectangle without rounded corner.
+ * @note if xr and yr are 0, then it will draw a rectangle without rounded
+ * corner.
*
* @param commands command list.
* @param points point's list.
* @param h Height of the rectangle.
* @param xr percentage of the half of the width of the rectangle (0 - 100).
* @param yr percentage of the half of the height of the rectangle (0 - 100).
+ * @since 1.14
*
*/
-
EAPI void
-efl_gfx_path_append_rounded_rect(Efl_Gfx_Path_Command **commands, double **points,
- double x, double y, double w, double h,
+efl_gfx_path_append_rounded_rect(Efl_Gfx_Path_Command **commands,
+ double **points, double x, double y, double w,
+ double h,
double xr,double yr);
-
/**
* Closes the current subpath by drawing a line to the beginning of the subpath,
- * automatically starting a new path. The current point of the new path is (0, 0).
+ * automatically starting a new path. The current point of the new path is
+ * (0, 0).
*
* @note If the subpath does not contain any points, this function does nothing.
*
* @param commands command list.
* @param points point's list.
*
+ * @since 1.14
*/
-
EAPI void
efl_gfx_path_append_close(Efl_Gfx_Path_Command **commands, double **points);
/**
* Append a circle with given center and radius.
*
- *
* @param commands command list.
* @param points point's list.
* @param cx X co-ordinate of the center of the circle.
* @param radius radius of the circle.
*
* @see efl_gfx_path_append_arc()
+ * @since 1.14
*/
-
EAPI void
efl_gfx_path_append_circle(Efl_Gfx_Path_Command **commands, double **points,
double cx, double cy, double radius);
projects / platform / upstream / efl.git / commitdiff