--- /dev/null
+%PageOutline
+
+Testing environment
+===================
+
+The new test environment from Tizen is the Web-TCT test suite. This was written for testing web components, but can easily be used for testing Dali.
+
+Each of the DALi repositories, **dali-core**, **dali-adaptor** and **dali-toolkit**, have their own test suites under the `automated-tests` folder. Within the src folder are a number of secondary folders - these correspond to 'managed' tests (for testing the frozen API for products), unmanaged tests (tests for other APIs) and internal (for desktop testing only)
+
+Installation
+------------
+
+There are usage instructions and installation instructions [here](http://download.tizen.org/tct/2.2.1/Manual/Web_TCT_2.2.1_User_Guide_v1.0.pdf)
+
+These are device specific instructions, however, installing the test suite will also provide the relevant packages for running tests on Ubuntu ( follow the first block of quickstart instructions below ).
+
+If you are planning on running tests on device, then flash your handset with latest image, or turn off ssh: `set_usb_debug.sh --mtp-sdb` and plug it in, then follow the quickstart instructions repeated below.
+
+Quickstart
+----------
+
+For target or desktop testing:
+
+ cd ~/Packages
+ wget http://download.tizen.org/tct/2.2.1/2.2.1_r1/web-tct_2.2.1_r1.tar.gz
+ sudo tar xzf web-tct_2.2.1_r1.tar.gz
+ cd web-tct_2.2.1_r1/tools
+ sudo -E ./tct-config-host.sh
+
+
+If you are planning on running tests on device, then plug in your freshly flashed device and run the following commands:
+
+ sudo apt-get install sdb
+ ./tct-config-device.sh
+
+**NOTE:** After flashing a handset, you will need to run this step of the installation again.
+
+Testing on desktop
+==================
+
+Building libraries with coverage options
+----------------------------------------
+
+Building dali core:
+
+ cd dali-core # the location of your dali-core repository
+ cd build/tizen
+ export CC=gcc
+ export CXX=g++
+ git clean -fxd . # Only do this in the build folder
+ autoreconf --install
+ CXXFLAGS='-g -O0 --coverage' LDFLAGS='--coverage' ./configure --prefix=$DESKTOP_PREFIX --enable-debug
+ make -j8 install
+
+Repeat for dali-adaptor and toolkit.
+
+Note, you __must__ use a local build and not a distributed build, and you __must__ also build with debug enabled to allow *DALI_ASSERT_DEBUG* to trigger on wrong behaviour ( Which should always be a test case failure! )
+
+Building the tests
+------------------
+
+Run the following commands:
+
+ cd automated-tests
+ ./build.sh
+
+This will build dali, dali-unmanaged and dali-internal test sets.
+
+Test sets can be built individually:
+
+ ./build.sh dali-unmanaged
+
+They can also be built without regenerating test case scripts (Useful for quicker rebuilds)
+
+ ./build.sh -n dali-internal
+
+Or without cleaning down the build area (Useful for fast build/run/debug cycles)
+
+ ./build.sh -n -r dali-internal
+
+
+Executing the tests
+-------------------
+
+To execute tests, cd into automated-tests and run
+
+ ./execute.sh
+
+This will execute dali, dali-unmanaged and dali-internal test sets. Note that the output summary for the first will be printed before running the second.
+
+To execute a subset of tests, you can run individual test sets, e.g.
+
+ ./execute.sh dali
+
+or for finer granularity, specify a test source file:
+
+ ./execute.sh dali utc-Dali-Actor.cpp
+
+To see the results, you can open the summary.xml in firefox.
+
+ firefox --new-window summary.xml
+
+To get coverage output, run
+
+ ./coverage.sh
+
+
+Testing on target
+=================
+
+To build for target, first build and install dali-core, dali-adaptor and dali-toolkit, then build dali-capi without --keep-packs option.
+
+You will need to install libconfig-tiny-perl:
+
+sudo apt-get install libconfig-tiny-perl
+
+If you use a non-standard `GBS_ROOT` then you will need to edit the tcbuild script to match your configuration - change line 96 and add a -B option with your GBS-ROOT path (line 96 = `gbs build -A armv7l --spec core-$1-tests.spec --include-all --keep-packs` ).
+To install on device from a non-standard GBS_ROOT, also modify line 28 (`RPM_DIR="$HOME/GBS-ROOT/local/repos/$PROFILE/armv7l/RPMS"`).
+
+For core Dali cd into automated-tests, and use:
+
+sudo ./tcbuild build dali
+
+ sudo ./tcbuild build dali-unmanaged
+ ./tcbuild install dali
+ ./tcbuild install dali-unmanaged
+
+For Dali Adaptor, cd into automated-tests, and use:
+
+ sudo ./tcbuild build dali-adaptor
+ sudo ./tcbuild build dali-adaptor-unmanaged # < Currently failing as needs a ".spec" file.
+ sudo ./tcbuild build dali-platform-abstraction
+ ./tcbuild install dali-adaptor
+ ./tcbuild install dali-adaptor-unmanaged
+ ./tcbuild install dali-platform-abstraction
+
+Ensure your handset's filesystem is writable:
+
+ sdb shell su -c "change-booting-mode.sh --update"
+
+To execute tests, cd into automated-tests and run
+
+ tct-mgr
+
+This will bring up the java test suite program. You should see the Plan pane with a list of all tests in. Select the tct-dali-core-tests and tct-dali-unmanaged-tests. and you will be offered a dialog to choose a test plan: either create a new one or use temp.
+Select dali test suite, and click Run, then "Create a new plan", and call it "Dali-Core" or some such. It will now run the dali-test suite.
+
+You can find the output files under /opt/tct/manager/result/
+
+
+Adding tests
+============
+
+To Managed API
+--------------
+
+If you are adding test cases for new or existing managed API (CAPI), you need to add your changes to the src/dali mirror, and copy your change to the managed test suite in core-api. You need to inform HQ of your update.
+
+To Unmanaged API
+----------------
+
+If you are adding test cases for unmanaged API, you need to add your changes to the src/dali-unmanaged test suite.
+
+For internal API
+----------------
+
+If you are adding tests for internal API, then this will only work on desktop, and you should add your tests to the src/dali-internal test suite.
+
+General
+-------
+
+If you are adding test cases to existing files, then all you need to do is create functions with the method signature
+
+ int UtcTestcase(void)
+ {
+ TestApplication application;
+ ...
+ END_TEST;
+ }
+
+
+Note that **there must be no extra whitespace in the method signature** (i.e., it must violate our coding convention and follow __exactly__ this pattern: `int UtcDaliMyTestcaseName(void)`), as it's parsed by an awk script to auto-generate the testcase arrays in the main header file.
+
+You can contine to use the TET api, e.g. `tet_infoline`, `tet_result` and our test check methods `DALI_TEST_CHECK`, `DALI_TEST_EQUALS`, etc.
+
+If you need any non-test methods or variables, ensure they are wrapped in an anonymous namespace.
+
+If you are adding new test files, then you need to add the filename to the SET(TC_SOURCES...
+section of CMakeLists.txt (this is also parsed by an awk script prior to building)
+
+Debugging
+=========
+
+On desktop, you can debug the tests by running gdb on the test program:
+
+ $ cd automated-tests
+ $ gdb build/src/dali/tct-dali-core
+ gdb> r <TestCase>
+
+replace `<TestCase>` with the name of the failing testcase.
+
+For example, using testcase UtcDaliNinePatch01 from the dali-core unmanaged test suite:
+
+ $ gdb build/src/dali-unmanaged/tct-dali-unmanaged-core
+ gdb> r UtcDaliNinePatch01
+
+
+On target, you can re-install the test RPM and associated debug RPMs manually using
+
+ sdb push <test-package>.rpm /tmp
+
+After installing the rpm and it's debug RPMs, you can find the executable in /opt/usr/bin/tct-dali-core. First ensure you have smack permissions set:
+
+ chsmack -e "^" /usr/bin/gdb
+ chsmack -e "^" /opt/usr/bin/tct-dali-core/tct-dali-core
+
+then run it under gdb as above.
+
+
+Troubleshooting
+===============
+
+If when running tct-mgr tests, if "Health-Check get" fails and leaves a white screen on the device, you will need to run `tct-config-device.sh` from your `web-tct/tools` directory (wherever you untarred it) and power cycle your handset. If that still fails, you can work-around the issue by running "`mkdir –p /opt/usr/media/Documents/tct/`" on target – you may also need to kill the getCapabilities app from App Manager on the handset)
+
+If the test results show that the test cases fail with "Undefined reference to XXX", it means you have probably failed to update the dali packages on target.
+
+If all the tests are failing then make sure that you have enabled the engineering mode on the target with the 'change-booting-mode.sh --update' command in sdb shell, as the tests may not have installed correctly
projects / platform / core / uifw / dali-core.git / commitdiff