- Static memory is always initialized with 0.
- Replaced in some cases C99 comments for /* */
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
module_param(repeat, int, 0444);
MODULE_PARM_DESC(repeat,"auto-repeat for IR keys (default: on)");
-static int debug = 0; /* debug level (0,1,2) */
+static int debug; /* debug level (0,1,2) */
module_param(debug, int, 0644);
#define dprintk(level, fmt, arg...) if (debug >= level) \
#define deb_irq(args...) dprintk(0x08,args)
#define deb_chk(args...) dprintk(0x10,args)
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS);
#ifdef ULE_DEBUG
/* The code inside ULE_DEBUG keeps a history of the last 100 TS cells processed. */
static unsigned char ule_hist[100*TS_SZ];
- static unsigned char *ule_where = ule_hist, ule_dump = 0;
+ static unsigned char *ule_where = ule_hist, ule_dump;
#endif
/* For all TS cells in current buffer.
u8 prevUCBlocks;
};
-static int debug = 0;
+static int debug;
#define dprintk if (debug) printk
/* Register values to initialise the demod */
static unsigned int dvb_pll_devcount;
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable verbose debug messages");
/* Use Equalizer Mean Squared Error instead of Phaser Tracker MSE */
/* #define USE_EQMSE */
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug,"Turn on/off lgdt330x frontend debugging (default:off).");
#define dprintk(args...) \
struct dvb_frontend frontend;
};
-static int debug = 0;
+static int debug;
#define dprintk if (debug) printk
static int nxt6000_writereg(struct nxt6000_state* state, u8 reg, u8 data)
u32 qam_state;
};
-static int debug = 0;
+static int debug;
#define dprintk if (debug) printk
/* Register values to initialise the demod, this will set VSB by default */
struct dvb_frontend_tune_settings* fesettings);
-static int debug = 0;
+static int debug;
#define dprintk if (debug) printk
static int s5h1420_writereg (struct s5h1420_state* state, u8 reg, u8 data)
return 0;
}
-// number of trials to recover from lockup
+/* number of trials to recover from lockup */
#define MAXTRIALS 5
-// maximum checks for data valid signal
+/* maximum checks for data valid signal */
#define MAXCHECKS 100
-// only for debugging: counter for detected lockups
-static int lockups = 0;
-// only for debugging: counter for channel switches
-static int switches = 0;
+/* only for debugging: counter for detected lockups */
+static int lockups;
+/* only for debugging: counter for channel switches */
+static int switches;
static int sp8870_set_frontend (struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
bool has_lock;
};
-static int debug = 0;
+static int debug;
#define dprintk(args...) \
do { \
if (debug) printk(KERN_DEBUG "tda10086: " args); \
#include "tda826x.h"
-static int debug = 0;
+static int debug;
#define dprintk(args...) \
do { \
if (debug) printk(KERN_DEBUG "tda826x: " args); \
#include "tda827x.h"
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
u8 demod_type;
};
-static int debug = 0;
+static int debug;
#define dprintk if (debug) printk
#define DEMOD_VES1893 0
if (debug) printk(KERN_DEBUG "zl10353: " args); \
} while (0)
-static int debug_regs = 0;
+static int debug_regs;
static int zl10353_single_write(struct dvb_frontend *fe, u8 reg, u8 val)
{
module_param(rc5_device, int, 0644);
MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)");
-static int ir_debug = 0;
+static int ir_debug;
module_param(ir_debug, int, 0644);
MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
const u8 * data, int len);
#endif
-static int numpkt = 0, numts, numstuff, numsec, numinvalid;
+static int numpkt, numts, numstuff, numsec, numinvalid;
static unsigned long lastj;
static void ttusb_process_muxpack(struct ttusb *ttusb, const u8 * muxpack,
#include "miropcm20-rds-core.h"
static char * text_buffer;
-static int rds_users = 0;
+static int rds_users;
static int rds_f_open(struct inode *in, struct file *fi)
static int io=-1; /* default to isapnp activation */
static int radio_nr = -1;
-static int users=0;
-static int curtuner=0;
-static int tunestat=0;
-static int sigstrength=0;
+static int users;
+static int curtuner;
+static int tunestat;
+static int sigstrength;
static wait_queue_head_t read_queue;
static struct timer_list readtimer;
-static __u8 rdsin=0,rdsout=0,rdsstat=0;
+static __u8 rdsin, rdsout, rdsstat;
static unsigned char rdsbuf[RDS_BUFFER];
static spinlock_t cadet_io_lock;
module_param(radio_nr, int, 0);
#ifdef MODULE
-static unsigned long mutefreq = 0;
+static unsigned long mutefreq;
module_param(mutefreq, ulong, 0);
MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)");
#endif
#define I2C_NAME(x) (x)->name
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define I2C_NAME(s) (s)->name
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
/* default frequency */
#define DEFAULT_FREQ 50 /* 50 or 75 (MHz) is available as BCLK */
static int freq = DEFAULT_FREQ; /* BCLK: available 50 or 70 (MHz) */
-static int vga = 0; /* default mode(0:QVGA mode, other:VGA mode) */
-static int vga_interlace = 0; /* 0 is normal mode for, else interlace mode */
+static int vga; /* default mode(0:QVGA mode, other:VGA mode) */
+static int vga_interlace; /* 0 is normal mode for, else interlace mode */
module_param(freq, int, 0);
module_param(vga, int, 0);
module_param(vga_interlace, int, 0);
#define I2C_NAME(s) (s)->name
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define I2C_NAME(s) (s)->name
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define VBI_DEFLINES 16
static unsigned int vbibufs = 4;
-static unsigned int vbi_debug = 0;
+static unsigned int vbi_debug;
module_param(vbibufs, int, 0444);
module_param(vbi_debug, int, 0644);
int ret=1;
unsigned int hi, lo;
unsigned int hi2, lo2;
- static int state = 0;
+ static int state;
if (buffer == NULL)
{
#define MAX_CAMS 4
static struct qcam_device *qcams[MAX_CAMS];
-static unsigned int num_cams = 0;
+static unsigned int num_cams;
static int init_bwqcam(struct parport *port)
{
static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 };
static int probe = 2;
-static int force_rgb = 0;
+static int force_rgb;
static int video_nr = -1;
static inline void qcam_set_ack(struct qcam_device *qcam, unsigned int i)
}
static struct qcam_device *qcams[MAX_CAMS];
-static unsigned int num_cams = 0;
+static unsigned int num_cams;
static int init_cqcam(struct parport *port)
{
*/
#define MAX_DMA_BUFS 3
-static int alloc_bufs_at_read = 0;
+static int alloc_bufs_at_read;
module_param(alloc_bufs_at_read, bool, 0444);
MODULE_PARM_DESC(alloc_bufs_at_read,
"Non-zero value causes DMA buffers to be allocated when the "
"will be allowed to allocate. These buffers are big and live "
"in vmalloc space.");
-static int flip = 0;
+static int flip;
module_param(flip, bool, 0444);
MODULE_PARM_DESC(flip,
"If set, the sensor will be instructed to flip the image "
#include <linux/slab.h>
#include <linux/vmalloc.h>
-//#define _CPIA2_DEBUG_
+/* #define _CPIA2_DEBUG_ */
#include "cpia2patch.h"
};
#endif
-static unsigned int debugs_on = 0;//DEBUG_REG;
+static unsigned int debugs_on; /* default 0 - DEBUG_REG */
/******************************************************************************
*****************************************************************************/
static void process_frame(struct camera_data *cam)
{
- static int frame_count = 0;
+ static int frame_count;
unsigned char *inbuff = cam->workbuff->data;
module_param(i2c_debug, int, 0644);
MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
-static unsigned int i2c_scan = 0;
+static unsigned int i2c_scan;
module_param(i2c_scan, int, 0444);
MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
module_param(mpegbufs,int,0644);
MODULE_PARM_DESC(mpegbufs,"number of mpeg buffers, range 2-32");
-static unsigned int debug = 0;
+static unsigned int debug;
module_param(debug,int,0644);
MODULE_PARM_DESC(debug,"enable debug messages [blackbird]");
/* ------------------------------------------------------------------ */
-static unsigned int core_debug = 0;
+static unsigned int core_debug;
module_param(core_debug,int,0644);
MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
-static unsigned int nicam = 0;
+static unsigned int nicam;
module_param(nicam,int,0644);
MODULE_PARM_DESC(nicam,"tv audio is nicam");
-static unsigned int nocomb = 0;
+static unsigned int nocomb;
module_param(nocomb,int,0644);
MODULE_PARM_DESC(nocomb,"disable comb filter");
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
-static unsigned int debug = 0;
+static unsigned int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug,"enable debug messages [dvb]");
#include "cx88.h"
#include <media/v4l2-common.h>
-static unsigned int i2c_debug = 0;
+static unsigned int i2c_debug;
module_param(i2c_debug, int, 0644);
MODULE_PARM_DESC(i2c_debug,"enable debug messages [i2c]");
-static unsigned int i2c_scan = 0;
+static unsigned int i2c_scan;
module_param(i2c_scan, int, 0444);
MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
u32 mask_keyup;
};
-static int ir_debug = 0;
+static int ir_debug;
module_param(ir_debug, int, 0644); /* debug level [IR] */
MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
-static unsigned int debug = 0;
+static unsigned int debug;
module_param(debug,int,0644);
MODULE_PARM_DESC(debug,"enable debug messages [mpeg]");
#include "cx88.h"
-static unsigned int audio_debug = 0;
+static unsigned int audio_debug;
module_param(audio_debug, int, 0644);
MODULE_PARM_DESC(audio_debug, "enable debug messages [audio]");
-static unsigned int always_analog = 0;
+static unsigned int always_analog;
module_param(always_analog,int,0644);
MODULE_PARM_DESC(always_analog,"force analog audio out");
-static unsigned int radio_deemphasis = 0;
+static unsigned int radio_deemphasis;
module_param(radio_deemphasis,int,0644);
MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, "
"0=None, 1=50us (elsewhere), 2=75us (USA)");
module_param(vbibufs,int,0644);
MODULE_PARM_DESC(vbibufs,"number of vbi buffers, range 2-32");
-static unsigned int vbi_debug = 0;
+static unsigned int vbi_debug;
module_param(vbi_debug,int,0644);
MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]");
MODULE_PARM_DESC(vbi_nr,"vbi device numbers");
MODULE_PARM_DESC(radio_nr,"radio device numbers");
-static unsigned int video_debug = 0;
+static unsigned int video_debug;
module_param(video_debug,int,0644);
MODULE_PARM_DESC(video_debug,"enable debug messages [video]");
-static unsigned int irq_debug = 0;
+static unsigned int irq_debug;
module_param(irq_debug,int,0644);
MODULE_PARM_DESC(irq_debug,"enable debug messages [IRQ handler]");
#define DPC_BOARD_CAN_DO_VBI(dev) (dev->revision != 0)
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "debug verbosity");
-static int dpc_num = 0;
+static int dpc_num;
#define DPC_INPUTS 2
static struct v4l2_input dpc_inputs[DPC_INPUTS] = {
/* #define ENABLE_DEBUG_ISOC_FRAMES */
-static unsigned int core_debug = 0;
+static unsigned int core_debug;
module_param(core_debug,int,0644);
MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __FUNCTION__ , ##arg); } while (0)
-static unsigned int reg_debug = 0;
+static unsigned int reg_debug;
module_param(reg_debug,int,0644);
MODULE_PARM_DESC(reg_debug,"enable debug messages [URB reg]");
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __FUNCTION__ , ##arg); } while (0)
-static unsigned int isoc_debug = 0;
+static unsigned int isoc_debug;
module_param(isoc_debug,int,0644);
MODULE_PARM_DESC(isoc_debug,"enable debug messages [isoc transfers]");
/* ----------------------------------------------------------- */
-static unsigned int i2c_scan = 0;
+static unsigned int i2c_scan;
module_param(i2c_scan, int, 0444);
MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
-static unsigned int i2c_debug = 0;
+static unsigned int i2c_debug;
module_param(i2c_debug, int, 0644);
MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
MODULE_PARM_DESC(vbi_nr, "vbi device numbers");
MODULE_PARM_DESC(radio_nr, "radio device numbers");
-static unsigned int video_debug = 0;
+static unsigned int video_debug;
module_param(video_debug,int,0644);
MODULE_PARM_DESC(video_debug,"enable debug messages [video]");
{
struct usb_device *udev = interface_to_usbdev(intf);
struct et61x251_device* cam;
- static unsigned int dev_nr = 0;
+ static unsigned int dev_nr;
unsigned int i;
int err = 0;
#include <media/saa7146_vv.h>
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "debug verbosity");
/* global variables */
-static int hexium_num = 0;
+static int hexium_num;
#define HEXIUM_GEMINI 4
#define HEXIUM_GEMINI_DUAL 5
#include <media/saa7146_vv.h>
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "debug verbosity");
/* global variables */
-static int hexium_num = 0;
+static int hexium_num;
#define HEXIUM_HV_PCI6_ORION 1
#define HEXIUM_ORION_1SVHS_3BNC 2
static int debug;
module_param(debug, int, 0644); /* debug level (0,1,2) */
-static int hauppauge = 0;
+static int hauppauge;
module_param(hauppauge, int, 0644); /* Choose Hauppauge remote */
MODULE_PARM_DESC(hauppauge, "Specify Hauppauge remote: 0=black, 1=grey (defaults to 0)");
static int dec_yuv_buffers = IVTV_DEFAULT_DEC_YUV_BUFFERS;
static int dec_vbi_buffers = IVTV_DEFAULT_DEC_VBI_BUFFERS;
-static int ivtv_yuv_mode = 0;
-static int ivtv_yuv_threshold=-1;
+static int ivtv_yuv_mode;
+static int ivtv_yuv_threshold = -1;
static int ivtv_pci_latency = 1;
-int ivtv_debug = 0;
+int ivtv_debug;
static int newi2c = -1;
{
u32 v;
int reqnr;
- static int sequence = 0;
+ static int sequence;
v = mchip_read(MCHIP_MM_INTA);
#include "tuner-i2c.h"
#include "mt20xx.h"
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable verbose debug messages");
static unsigned int tv_antenna = 1;
module_param(tv_antenna, int, 0644);
-static unsigned int radio_antenna = 0;
+static unsigned int radio_antenna;
module_param(radio_antenna, int, 0644);
/* ---------------------------------------------------------------------- */
#define MXB_BOARD_CAN_DO_VBI(dev) (dev->revision != 0)
/* global variable */
-static int mxb_num = 0;
+static int mxb_num;
/* initial frequence the tuner will be tuned to.
in verden (lower saxony, germany) 4148 is a
module_param(freq, int, 0644);
MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup");
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
u8 hits;
};
-static int i2c_count = 0;
+static int i2c_count;
static struct i2c_info i2cinfo[64];
static int decoder = PHILIPS2;
-static int standard = 0; /* 0 - auto 1 - ntsc 2 - pal 3 - secam */
+static int standard; /* 0 - auto 1 - ntsc 2 - pal 3 - secam */
/*
* I/O ports and Shared Memory
static struct pvr2_hdw *unit_pointers[PVR_NUM] = {[ 0 ... PVR_NUM-1 ] = NULL};
static DEFINE_MUTEX(pvr2_unit_mtx);
-static int ctlchg = 0;
+static int ctlchg;
static int initusbreset = 1;
-static int procreload = 0;
+static int procreload;
static int tuner[PVR_NUM] = { [0 ... PVR_NUM-1] = -1 };
static int tolerance[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 };
static int video_std[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 };
-static int init_pause_msec = 0;
+static int init_pause_msec;
module_param(ctlchg, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ctlchg, "0=optimize ctl change 1=always accept new ctl value");
*/
-static unsigned int i2c_scan = 0;
+static unsigned int i2c_scan;
module_param(i2c_scan, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
#ifdef CONFIG_USB_PWC_DEBUG
int pwc_trace = PWC_DEBUG_LEVEL;
#endif
-static int power_save = 0;
-static int led_on = 100, led_off = 0; /* defaults to LED that is on while in use */
+static int power_save;
+static int led_on = 100, led_off; /* defaults to LED that is on while in use */
static int pwc_preferred_compression = 1; /* 0..3 = uncompressed..high */
static struct {
int type;
} /* ..status == 0 */
else {
/* This is normally not interesting to the user, unless
- * you are really debugging something */
- static int iso_error = 0;
+ * you are really debugging something, default = 0 */
+ static int iso_error;
iso_error++;
if (iso_error < 20)
PWC_DEBUG_FLOW("Iso frame %d of USB has error %d\n", i, fst);
I2C_CLIENT_INSMOD;
/* insmod options */
-static unsigned int debug = 0;
-static unsigned int xtal = 0;
-static unsigned int rbds = 0;
-static unsigned int plvl = 0;
+static unsigned int debug;
+static unsigned int xtal;
+static unsigned int rbds;
+static unsigned int plvl;
static unsigned int bufblocks = 100;
module_param(debug, int, 0644);
#include <media/v4l2-common.h>
#include <linux/video_decoder.h>
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define I2C_NAME(s) (s)->name
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define I2C_NAME(x) (x)->name
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
"Hans Verkuil, Mauro Carvalho Chehab");
MODULE_LICENSE("GPL");
-static int debug = 0;
+static int debug;
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#include <linux/video_decoder.h>
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, " Set the default Debug level. Default: 0 (Off) - (0-1)");
#include "saa7134.h"
#include "saa7134-reg.h"
-static unsigned int debug = 0;
+static unsigned int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug,"enable debug messages [alsa]");
/* ------------------------------------------------------------------ */
-static unsigned int irq_debug = 0;
+static unsigned int irq_debug;
module_param(irq_debug, int, 0644);
MODULE_PARM_DESC(irq_debug,"enable debug messages [IRQ handler]");
-static unsigned int core_debug = 0;
+static unsigned int core_debug;
module_param(core_debug, int, 0644);
MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
-static unsigned int gpio_tracking = 0;
+static unsigned int gpio_tracking;
module_param(gpio_tracking, int, 0644);
MODULE_PARM_DESC(gpio_tracking,"enable debug messages [gpio]");
-static unsigned int alsa = 0;
+static unsigned int alsa;
module_param(alsa, int, 0644);
MODULE_PARM_DESC(alsa,"enable ALSA DMA sound [dmasound]");
-static unsigned int oss = 0;
+static unsigned int oss;
module_param(oss, int, 0644);
MODULE_PARM_DESC(oss,"enable OSS DMA sound [dmasound]");
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
-static unsigned int antenna_pwr = 0;
+static unsigned int antenna_pwr;
module_param(antenna_pwr, int, 0444);
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
-static int use_frontend = 0;
+static int use_frontend;
module_param(use_frontend, int, 0644);
MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off).");
module_param_array(empress_nr, int, NULL, 0444);
MODULE_PARM_DESC(empress_nr,"ts device number");
-static unsigned int debug = 0;
+static unsigned int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug,"enable debug messages");
/* ----------------------------------------------------------- */
-static unsigned int i2c_debug = 0;
+static unsigned int i2c_debug;
module_param(i2c_debug, int, 0644);
MODULE_PARM_DESC(i2c_debug,"enable debug messages [i2c]");
-static unsigned int i2c_scan = 0;
+static unsigned int i2c_scan;
module_param(i2c_scan, int, 0444);
MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
#include "saa7134-reg.h"
#include "saa7134.h"
-static unsigned int disable_ir = 0;
+static unsigned int disable_ir;
module_param(disable_ir, int, 0444);
MODULE_PARM_DESC(disable_ir,"disable infrared remote support");
-static unsigned int ir_debug = 0;
+static unsigned int ir_debug;
module_param(ir_debug, int, 0644);
MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]");
-static int pinnacle_remote = 0;
+static int pinnacle_remote;
module_param(pinnacle_remote, int, 0644); /* Choose Pinnacle PCTV remote */
MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=grey (defaults to 0)");
/* ------------------------------------------------------------------ */
-static unsigned int ts_debug = 0;
+static unsigned int ts_debug;
module_param(ts_debug, int, 0644);
MODULE_PARM_DESC(ts_debug,"enable debug messages [ts]");
/* ------------------------------------------------------------------ */
-static unsigned int audio_debug = 0;
+static unsigned int audio_debug;
module_param(audio_debug, int, 0644);
MODULE_PARM_DESC(audio_debug,"enable debug messages [tv audio]");
-static unsigned int audio_ddep = 0;
+static unsigned int audio_ddep;
module_param(audio_ddep, int, 0644);
MODULE_PARM_DESC(audio_ddep,"audio ddep overwrite");
static int audio_clock_override = UNSET;
module_param(audio_clock_override, int, 0644);
-static int audio_clock_tweak = 0;
+static int audio_clock_tweak;
module_param(audio_clock_tweak, int, 0644);
MODULE_PARM_DESC(audio_clock_tweak, "Audio clock tick fine tuning for cards with audio crystal that's slightly off (range [-1024 .. 1024])");
/* ------------------------------------------------------------------ */
-static unsigned int vbi_debug = 0;
+static unsigned int vbi_debug;
module_param(vbi_debug, int, 0644);
MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]");
unsigned int video_debug;
static unsigned int gbuffers = 8;
-static unsigned int noninterlaced = 0;
+static unsigned int noninterlaced; /* 0 */
static unsigned int gbufsize = 720*576*4;
static unsigned int gbufsize_max = 720*576*4;
static char secam[] = "--";
#define I2C_NAME(s) (s)->name
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#include <linux/usb.h>
#include "se401.h"
-static int flickerless=0;
+static int flickerless;
static int video_nr = -1;
static struct usb_device_id device_table [] = {
{
struct usb_device *udev = interface_to_usbdev(intf);
struct sn9c102_device* cam;
- static unsigned int dev_nr = 0;
+ static unsigned int dev_nr;
unsigned int i;
int err = 0, r;
static struct saa7146 saa7146s[SAA7146_MAX];
-static int saa_num = 0; /* number of SAA7146s in use */
+static int saa_num; /* number of SAA7146s in use */
static int video_nr = -1;
module_param(video_nr, int, 0);
attach_inform(saa, i);
}
-static int debiwait_maxwait = 0;
+static int debiwait_maxwait;
static int wait_for_debi_done(struct saa7146 *saa)
{
#include "stv680.h"
static int video_nr = -1;
-static int swapRGB = 0; /* default for auto sleect */
-static int swapRGB_on = 0; /* default to allow auto select; -1=swap never, +1= swap always */
-static unsigned int debug = 0;
+static int swapRGB; /* 0 = default for auto select */
+
+/* 0 = default to allow auto select; -1 = swap never, +1 = swap always */
+static int swapRGB_on;
+
+static unsigned int debug;
#define PDEBUG(level, fmt, args...) \
do { \
#include "tda9840.h"
-static int debug = 0; /* insmod parameter */
+static int debug; /* insmod parameter */
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
#define dprintk(args...) \
#include "tuner-i2c.h"
#include "tea5761.h"
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable verbose debug messages");
#include "tuner-i2c.h"
#include "tea5767.h"
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable verbose debug messages");
#include "tea6415c.h"
-static int debug = 0; /* insmod parameter */
+static int debug; /* insmod parameter */
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
#define dprintk(args...) \
#include "tea6420.h"
-static int debug = 0; /* insmod parameter */
+static int debug; /* insmod parameter */
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
#define dprintk(args...) \
I2C_CLIENT_INSMOD;
/* insmod options used at init time => read/only */
-static unsigned int addr = 0;
-static unsigned int no_autodetect = 0;
-static unsigned int show_i2c = 0;
+static unsigned int addr;
+static unsigned int no_autodetect;
+static unsigned int show_i2c;
/* insmod options used at runtime => read/write */
static int tuner_debug;
/* ---------------------------------------------------------------------- */
/* insmod args */
-static int debug = 0; /* insmod parameter */
+static int debug; /* insmod parameter */
module_param(debug, int, 0644);
MODULE_DESCRIPTION("device driver for various i2c TV sound decoder / audiomux chips");
static int tda9855 = 1;
static int tda9873 = 1;
static int tda9874a = 1;
-static int tea6300 = 0; /* address clash with msp34xx */
-static int tea6320 = 0; /* address clash with msp34xx */
+static int tea6300; /* default 0 - address clash with msp34xx */
+static int tea6320; /* default 0 - address clash with msp34xx */
static int tea6420 = 1;
static int pic16c54 = 1;
-static int ta8874z = 0; /* address clash with tda9840 */
+static int ta8874z; /* default 0 - address clash with tda9840 */
module_param(tda8425, int, 0444);
module_param(tda9840, int, 0444);
I2C_CLIENT_INSMOD;
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
/* 01.01.08 - Added for RCA video in support -LO */
/* Settings for camera model 3 */
-static int init_model3_input = 0;
+static int init_model3_input;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)");
}
#else
#define DEBUG(n, arg...)
-static const int debug = 0;
+static const int debug;
#endif
}
#else
#define DEBUG(n, arg...)
-static const int debug = 0;
+static const int debug;
#endif
#define DRIVER_VERSION "v0.01"
static struct usbvideo *cams = NULL;
-static int debug = 0;
+static int debug;
-static int flags = 0; /* FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */
+static int flags; /* FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */
static const int min_canvasWidth = 8;
static const int min_canvasHeight = 4;
struct usbvideo_frame *frame;
int num_cell = 0;
int scan_length = 0;
- static int num_pass = 0;
+ static int num_pass;
if (uvd == NULL) {
err("%s: uvd == NULL", __FUNCTION__);
#include "usbvision.h"
-static unsigned int core_debug = 0;
+static unsigned int core_debug;
module_param(core_debug,int,0644);
MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
-static unsigned int force_testpattern = 0;
+static unsigned int force_testpattern;
module_param(force_testpattern,int,0644);
MODULE_PARM_DESC(force_testpattern,"enable test pattern display [core]");
-static int adjustCompression = 1; // Set the compression to be adaptive
+static int adjustCompression = 1; /* Set the compression to be adaptive */
module_param(adjustCompression, int, 0444);
MODULE_PARM_DESC(adjustCompression, " Set the ADPCM compression for the device. Default: 1 (On)");
-static int SwitchSVideoInput = 0; // To help people with Black and White output with using s-video input. Some cables and input device are wired differently.
+/* To help people with Black and White output with using s-video input.
+ * Some cables and input device are wired differently. */
+static int SwitchSVideoInput;
module_param(SwitchSVideoInput, int, 0444);
MODULE_PARM_DESC(SwitchSVideoInput, " Set the S-Video input. Some cables and input device are wired differently. Default: 0 (Off)");
unsigned char *f;
int num_cell = 0;
int scan_length = 0;
- static int num_pass = 0;
+ static int num_pass;
if (usbvision == NULL) {
printk(KERN_ERR "%s: usbvision == NULL\n", proc);
}
#if ENABLE_HEXDUMP
if (totlen > 0) {
- static int foo = 0;
+ static int foo;
if (foo < 1) {
printk(KERN_DEBUG "+%d.\n", usbvision->scratchlen);
usbvision_hexdump(data0, (totlen > 64) ? 64 : totlen);
#define DBG_I2C 1<<0
-static int i2c_debug = 0;
+static int i2c_debug;
module_param (i2c_debug, int, 0644); // debug_i2c_usb mode of the device driver
MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
/* sequential number of usbvision device */
-static int usbvision_nr = 0;
+static int usbvision_nr;
static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = {
{ 1, 1, 8, V4L2_PIX_FMT_GREY , "GREY" },
/* Set the default format for ISOC endpoint */
static int isocMode = ISOC_MODE_COMPRESS;
/* Set the default Debug Mode of the device driver */
-static int video_debug = 0;
+static int video_debug;
/* Set the default device to power on at startup */
static int PowerOnAtOpen = 1;
/* Sequential Number of Video Device */
#include <linux/kmod.h>
#endif
-static unsigned int debug = 0;
+static unsigned int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug,"enable debug messages");
MODULE_AUTHOR("Bill Dirks");
#define MAGIC_CHECK(is,should) if (unlikely((is) != (should))) \
{ printk(KERN_ERR "magic mismatch: %x (expected %x)\n",is,should); BUG(); }
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_DESCRIPTION("helper module to manage video4linux pci dma sg buffers");
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
-static unsigned int debug = 0;
+static unsigned int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug,"enable debug messages");
#define MAGIC_CHECK(is,should) if (unlikely((is) != (should))) \
{ printk(KERN_ERR "magic mismatch: %x (expected %x)\n",is,should); BUG(); }
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_DESCRIPTION("helper module to manage video4linux vmalloc buffers");
#include "videocodec.h"
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-4)");
/* ============ */
static char *videocodec_buf = NULL;
-static int videocodec_bufsize = 0;
+static int videocodec_bufsize;
static int
videocodec_build_table (void)
*
* Use non-zero value to enable conversion.
*/
-static int vino_pixel_conversion = 0;
+static int vino_pixel_conversion;
module_param_named(pixelconv, vino_pixel_conversion, int, 0);
/* Initialization and cleanup */
-// __initdata
-static int vino_init_stage = 0;
+/* __initdata */
+static int vino_init_stage;
static const struct file_operations vino_fops = {
.owner = THIS_MODULE,
static struct video_device v4l_device_template = {
.name = "NOT SET",
- //.type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE |
- // VID_TYPE_CLIPPING | VID_TYPE_SCALES, VID_TYPE_OVERLAY
+ /*.type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE | */
+ /* VID_TYPE_CLIPPING | VID_TYPE_SCALES, VID_TYPE_OVERLAY */
.fops = &vino_fops,
.minor = -1,
};
#define I2C_VPX3220 0x86
#define VPX3220_DEBUG KERN_DEBUG "vpx3220: "
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#include <media/v4l2-common.h>
#include <linux/parport.h>
-//#define DEBUG // Undef me for production
+/*#define DEBUG*/ /* Undef me for production */
#ifdef DEBUG
#define DPRINTF(x, a...) printk(KERN_DEBUG "W9966: %s(): "x, __FUNCTION__ , ##a)
\tEg: >pardev=parport3,aggressive,parport2,parport1< would assign\n\
\tcam 1 to parport3 and search every parport for cam 2 etc...");
-static int parmode = 0;
+static int parmode;
module_param(parmode, int, 0);
MODULE_PARM_DESC(parmode, "parmode: transfer mode (0=auto, 1=ecp, 2=epp");
enum w9968cf_model_id mod_id;
struct list_head* ptr;
u8 sc = 0; /* number of simultaneous cameras */
- static unsigned short dev_nr = 0; /* we are handling device number n */
+ static unsigned short dev_nr; /* 0 - we are handling device number n */
if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[0].idVendor &&
le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[0].idProduct)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct zc0301_device* cam;
- static unsigned int dev_nr = 0;
+ static unsigned int dev_nr;
unsigned int i;
int err = 0;
or set in in a VIDIOCSFBUF ioctl
*/
-static unsigned long vidmem = 0; /* Video memory base address */
+static unsigned long vidmem; /* default = 0 - Video memory base address */
module_param(vidmem, ulong, 0444);
MODULE_PARM_DESC(vidmem, "Default video memory base address");
Default input and video norm at startup of the driver.
*/
-static unsigned int default_input = 0; /* 0=Composite, 1=S-Video */
+static unsigned int default_input; /* default 0 = Composite, 1 = S-Video */
module_param(default_input, uint, 0444);
MODULE_PARM_DESC(default_input,
"Default input (0=Composite, 1=S-Video, 2=Internal)");
MODULE_PARM_DESC(default_mux,
"Default 6 Eyes mux setting (Input selection)");
-static int default_norm = 0; /* 0=PAL, 1=NTSC 2=SECAM */
+static int default_norm; /* default 0 = PAL, 1 = NTSC 2 = SECAM */
module_param(default_norm, int, 0444);
MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)");
extern const struct zoran_format zoran_formats[];
-static int lml33dpath = 0; /* 1 will use digital path in capture
+static int lml33dpath; /* default = 0
+ * 1 will use digital path in capture
* mode instead of analog. It can be
* used for picture adjustments using
* tool like xawtv while watching image
zr36057_enable_jpg (struct zoran *zr,
enum zoran_codec_mode mode)
{
- static int zero = 0;
+ static int zero;
static int one = 1;
struct vfe_settings cap;
int field_size =
extern int jpg_bufsize;
extern int pass_through;
-static int lock_norm = 0; /* 1=Don't change TV standard (norm) */
+static int lock_norm; /* 0 = default 1 = Don't change TV standard (norm) */
module_param(lock_norm, int, 0644);
MODULE_PARM_DESC(lock_norm, "Prevent norm changes (1 = ignore, >1 = fail)");
#define MAX_CODECS 20
/* amount of chips attached via this driver */
-static int zr36016_codecs = 0;
+static int zr36016_codecs;
/* debugging is available via module parameter */
-
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-4)");
#define MAX_CODECS 20
/* amount of chips attached via this driver */
-static int zr36050_codecs = 0;
+static int zr36050_codecs;
/* debugging is available via module parameter */
-
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-4)");
#define MAX_CODECS 20
/* amount of chips attached via this driver */
-static int zr36060_codecs = 0;
+static int zr36060_codecs;
-static int low_bitrate = 0;
+static int low_bitrate;
module_param(low_bitrate, bool, 0);
MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate");
/* debugging is available via module parameter */
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-4)");
/* Module parameters */
-static int debug = 0;
-static int mode = 0;
+static int debug;
+static int mode;
/* Module parameters interface */