Optional properties:
+ - reset-gpios : GPIO spec for the RESET pin. If specified, it will be
+ asserted during driver probe.
+
- adi,dc-dc-ilim-microamp: The dc-to-dc converter current limit
The following values are currently supported [uA]:
* 150000
spi-max-frequency = <1000000>;
spi-cpha;
+ reset-gpios = <&gpio 22 0>;
+
adi,dc-dc-mode = <2>;
adi,range-microvolt = <0 10000000>;
adi,dc-dc-ilim-microamp = <200000>;
#include <linux/module.h>
#include <linux/property.h>
#include <linux/spi/spi.h>
+#include <linux/gpio/consumer.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
struct ad5758_state {
struct spi_device *spi;
struct mutex lock;
+ struct gpio_desc *gpio_reset;
struct ad5758_range out_range;
unsigned int dc_dc_mode;
unsigned int dc_dc_ilim;
AD5758_CAL_MEM_UNREFRESHED_MSK);
}
+static int ad5758_reset(struct ad5758_state *st)
+{
+ if (st->gpio_reset) {
+ gpiod_set_value(st->gpio_reset, 0);
+ usleep_range(100, 1000);
+ gpiod_set_value(st->gpio_reset, 1);
+ usleep_range(100, 1000);
+
+ return 0;
+ } else {
+ /* Perform a software reset */
+ return ad5758_soft_reset(st);
+ }
+}
+
static int ad5758_reg_access(struct iio_dev *indio_dev,
unsigned int reg,
unsigned int writeval,
{
int regval, ret;
+ st->gpio_reset = devm_gpiod_get_optional(&st->spi->dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(st->gpio_reset))
+ return PTR_ERR(st->gpio_reset);
+
/* Disable CRC checks */
ret = ad5758_crc_disable(st);
if (ret < 0)
return ret;
- /* Perform a software reset */
- ret = ad5758_soft_reset(st);
+ /* Perform a reset */
+ ret = ad5758_reset(st);
if (ret < 0)
return ret;