Roland Reported the following:
| kmem_cache_create: duplicate cache isp1760_qtd
| Pid: 461, comm: modprobe Tainted: G W 2.6.28-rc2-git3-default #4
| Call Trace:
| [<
c017540e>] kmem_cache_create+0xc9/0x3a3
| [<
c0159a8d>] free_pages_bulk+0x16c/0x1c9
| [<
f165c05f>] isp1760_init+0x0/0xb [isp1760]
| [<
f165c018>] init_kmem_once+0x18/0x5f [isp1760]
| [<
f165c064>] isp1760_init+0x5/0xb [isp1760]
| [<
c010113d>] _stext+0x4d/0x148
| [<
c0142936>] load_module+0x12cd/0x142e
| [<
c01743c4>] kmem_cache_destroy+0x0/0xd7
| [<
c0142b1e>] sys_init_module+0x87/0x176
| [<
c01039eb>] sysenter_do_call+0x12/0x2f
The reason, is that ret is initialized with ENODEV instead of 0 _or_
the kmem cache is not freed in error case with no bus binding.
The difference between OF+PCI and OF only is
| 15148 804 32 15984 3e70 isp1760-of-pci.o
| 13748 676 8 14432 3860 isp1760-of.o
about 1.5 KiB.
Until there is a checkbox where the user *must* select atleast one item,
and may select multiple entries I don't make it selectable anymore.
Having a driver which can't be used under any circumstances is broken
anyway and I've seen distros shipping it that way.
Reported-by: Roland Kletzing <devzero@web.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>a
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
config USB_ISP1760_HCD
tristate "ISP 1760 HCD support"
- depends on USB && EXPERIMENTAL
+ depends on USB && EXPERIMENTAL && (PCI || PPC_OF)
---help---
The ISP1760 chip is a USB 2.0 host controller.
This driver does not support isochronous transfers or OTG.
+ This USB controller is usually attached to a non-DMA-Master
+ capable bus. NXP's eval kit brings this chip on PCI card
+ where the chip itself is behind a PLB to simulate such
+ a bus.
To compile this driver as a module, choose M here: the
- module will be called isp1760-hcd.
-
-config USB_ISP1760_PCI
- bool "Support for the PCI bus"
- depends on USB_ISP1760_HCD && PCI
- ---help---
- Enables support for the device present on the PCI bus.
- This should only be required if you happen to have the eval kit from
- NXP and you are going to test it.
-
-config USB_ISP1760_OF
- bool "Support for the OF platform bus"
- depends on USB_ISP1760_HCD && PPC_OF
- ---help---
- Enables support for the device present on the PowerPC
- OpenFirmware platform bus.
+ module will be called isp1760.
config USB_OHCI_HCD
tristate "OHCI HCD support"
#include "../core/hcd.h"
#include "isp1760-hcd.h"
-#ifdef CONFIG_USB_ISP1760_OF
+#ifdef CONFIG_PPC_OF
#include <linux/of.h>
#include <linux/of_platform.h>
#endif
-#ifdef CONFIG_USB_ISP1760_PCI
+#ifdef CONFIG_PCI
#include <linux/pci.h>
#endif
-#ifdef CONFIG_USB_ISP1760_OF
+#ifdef CONFIG_PPC_OF
static int of_isp1760_probe(struct of_device *dev,
const struct of_device_id *match)
{
};
#endif
-#ifdef CONFIG_USB_ISP1760_PCI
+#ifdef CONFIG_PCI
static u32 nxp_pci_io_base;
static u32 iolength;
static u32 pci_mem_phy0;
static int __init isp1760_init(void)
{
- int ret = -ENODEV;
+ int ret;
init_kmem_once();
-#ifdef CONFIG_USB_ISP1760_OF
+#ifdef CONFIG_PPC_OF
ret = of_register_platform_driver(&isp1760_of_driver);
if (ret) {
deinit_kmem_cache();
return ret;
}
#endif
-#ifdef CONFIG_USB_ISP1760_PCI
+#ifdef CONFIG_PCI
ret = pci_register_driver(&isp1761_pci_driver);
if (ret)
goto unreg_of;
#endif
return ret;
-#ifdef CONFIG_USB_ISP1760_PCI
+#ifdef CONFIG_PCI
unreg_of:
#endif
-#ifdef CONFIG_USB_ISP1760_OF
+#ifdef CONFIG_PPC_OF
of_unregister_platform_driver(&isp1760_of_driver);
#endif
deinit_kmem_cache();
static void __exit isp1760_exit(void)
{
-#ifdef CONFIG_USB_ISP1760_OF
+#ifdef CONFIG_PPC_OF
of_unregister_platform_driver(&isp1760_of_driver);
#endif
-#ifdef CONFIG_USB_ISP1760_PCI
+#ifdef CONFIG_PCI
pci_unregister_driver(&isp1761_pci_driver);
#endif
deinit_kmem_cache();