On second thought, this is a better way to fix things

diff --git a/networking/libiproute/ll_proto.c b/networking/libiproute/ll_proto.c
index 23ac595..45afdb8 100644 (file)
--- a/networking/libiproute/ll_proto.c
+++ b/networking/libiproute/ll_proto.c
@@ -14,52 +14,11 @@
 #include <string.h>
 #include "utils.h"
 
-/* Stuff swiped from linux/if_arp.h */
-#define ETH_P_LOOP     0x0060          /* Ethernet Loopback packet     */
-#define ETH_P_PUP      0x0200          /* Xerox PUP packet             */
-#define ETH_P_PUPAT    0x0201          /* Xerox PUP Addr Trans packet  */
-#define ETH_P_IP       0x0800          /* Internet Protocol packet     */
-#define ETH_P_X25      0x0805          /* CCITT X.25                   */
-#define ETH_P_ARP      0x0806          /* Address Resolution packet    */
-#define        ETH_P_BPQ       0x08FF          /* G8BPQ AX.25 Ethernet Packet  [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_IEEEPUP  0x0a00          /* Xerox IEEE802.3 PUP packet */
-#define ETH_P_IEEEPUPAT        0x0a01          /* Xerox IEEE802.3 PUP Addr Trans packet */
-#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
-#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
-#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
-#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
-#define ETH_P_LAT       0x6004          /* DEC LAT                      */
-#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
-#define ETH_P_CUST      0x6006          /* DEC Customer use             */
-#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
-#define ETH_P_RARP      0x8035         /* Reverse Addr Res packet      */
-#define ETH_P_ATALK    0x809B          /* Appletalk DDP                */
-#define ETH_P_AARP     0x80F3          /* Appletalk AARP               */
-#define ETH_P_8021Q    0x8100          /* 802.1Q VLAN Extended Header  */
-#define ETH_P_IPX      0x8137          /* IPX over DIX                 */
-#define ETH_P_IPV6     0x86DD          /* IPv6 over bluebook           */
-#define ETH_P_PPP_DISC 0x8863          /* PPPoE discovery messages     */
-#define ETH_P_PPP_SES  0x8864          /* PPPoE session messages       */
-#define ETH_P_ATMMPOA  0x884c          /* MultiProtocol Over ATM       */
-#define ETH_P_ATMFATE  0x8884          /* Frame-based ATM Transport over Ethernet */
-#define ETH_P_EDP2     0x88A2          /* Coraid EDP2                  */
-#define ETH_P_802_3    0x0001          /* Dummy type for 802.3 frames  */
-#define ETH_P_AX25     0x0002          /* Dummy protocol id for AX.25  */
-#define ETH_P_ALL      0x0003          /* Every packet (be careful!!!) */
-#define ETH_P_802_2    0x0004          /* 802.2 frames                 */
-#define ETH_P_SNAP     0x0005          /* Internal only                */
-#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
-#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
-#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
-#define ETH_P_LOCALTALK 0x0009         /* Localtalk pseudo type        */
-#define ETH_P_PPPTALK  0x0010          /* Dummy type for Atalk over PPP*/
-#define ETH_P_TR_802_2 0x0011          /* 802.2 frames                 */
-#define ETH_P_MOBITEX  0x0015          /* Mobitex (kaz@cafe.net)       */
-#define ETH_P_CONTROL  0x0016          /* Card specific control frames */
-#define ETH_P_IRDA     0x0017          /* Linux-IrDA                   */
-#define ETH_P_ECONET   0x0018          /* Acorn Econet                 */
-#define ETH_P_HDLC     0x0019          /* HDLC frames                  */
-
+#if __GLIBC__ >=2 && __GLIBC_MINOR >= 1
+#include <net/ethernet.h>
+#else
+#include <linux/if_ether.h>
+#endif
 
 #define __PF(f,n) { ETH_P_##f, #n },
 static struct {