staging: comedi: das800: remove forward declarations
authorH Hartley Sweeten <hsweeten@visionengravers.com>
Tue, 23 Apr 2013 01:33:03 +0000 (18:33 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 23 Apr 2013 17:41:38 +0000 (10:41 -0700)
Move the das800_cancel() and das800_interrupt() functions to remove
the need for the remaining forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/das800.c

index 596be5e..18e2ac0 100644 (file)
@@ -228,122 +228,6 @@ struct das800_private {
        volatile int do_bits;   /* digital output bits */
 };
 
-static int das800_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
-
-static irqreturn_t das800_interrupt(int irq, void *d);
-static void enable_das800(struct comedi_device *dev);
-static void disable_das800(struct comedi_device *dev);
-
-/* interrupt service routine */
-static irqreturn_t das800_interrupt(int irq, void *d)
-{
-       short i;                /* loop index */
-       short dataPoint = 0;
-       struct comedi_device *dev = d;
-       const struct das800_board *thisboard = comedi_board(dev);
-       struct das800_private *devpriv = dev->private;
-       struct comedi_subdevice *s = dev->read_subdev;  /* analog input subdevice */
-       struct comedi_async *async;
-       int status;
-       unsigned long irq_flags;
-       static const int max_loops = 128;       /*  half-fifo size for cio-das802/16 */
-       /*  flags */
-       int fifo_empty = 0;
-       int fifo_overflow = 0;
-
-       status = inb(dev->iobase + DAS800_STATUS);
-       /* if interrupt was not generated by board or driver not attached, quit */
-       if (!(status & IRQ))
-               return IRQ_NONE;
-       if (!(dev->attached))
-               return IRQ_HANDLED;
-
-       /* wait until here to initialize async, since we will get null dereference
-        * if interrupt occurs before driver is fully attached!
-        */
-       async = s->async;
-
-       /*  if hardware conversions are not enabled, then quit */
-       spin_lock_irqsave(&dev->spinlock, irq_flags);
-       outb(CONTROL1, dev->iobase + DAS800_GAIN);      /* select base address + 7 to be STATUS2 register */
-       status = inb(dev->iobase + DAS800_STATUS2) & STATUS2_HCEN;
-       /* don't release spinlock yet since we want to make sure no one else disables hardware conversions */
-       if (status == 0) {
-               spin_unlock_irqrestore(&dev->spinlock, irq_flags);
-               return IRQ_HANDLED;
-       }
-
-       /* loop while card's fifo is not empty (and limit to half fifo for cio-das802/16) */
-       for (i = 0; i < max_loops; i++) {
-               /* read 16 bits from dev->iobase and dev->iobase + 1 */
-               dataPoint = inb(dev->iobase + DAS800_LSB);
-               dataPoint += inb(dev->iobase + DAS800_MSB) << 8;
-               if (thisboard->resolution == 12) {
-                       fifo_empty = dataPoint & FIFO_EMPTY;
-                       fifo_overflow = dataPoint & FIFO_OVF;
-                       if (fifo_overflow)
-                               break;
-               } else {
-                       fifo_empty = 0; /*  cio-das802/16 has no fifo empty status bit */
-               }
-               if (fifo_empty)
-                       break;
-               /* strip off extraneous bits for 12 bit cards */
-               if (thisboard->resolution == 12)
-                       dataPoint = (dataPoint >> 4) & 0xfff;
-               /* if there are more data points to collect */
-               if (devpriv->count > 0 || devpriv->forever == 1) {
-                       /* write data point to buffer */
-                       cfc_write_to_buffer(s, dataPoint);
-                       if (devpriv->count > 0)
-                               devpriv->count--;
-               }
-       }
-       async->events |= COMEDI_CB_BLOCK;
-       /* check for fifo overflow */
-       if (thisboard->resolution == 12) {
-               fifo_overflow = dataPoint & FIFO_OVF;
-               /*  else cio-das802/16 */
-       } else {
-               fifo_overflow = inb(dev->iobase + DAS800_GAIN) & CIO_FFOV;
-       }
-       if (fifo_overflow) {
-               spin_unlock_irqrestore(&dev->spinlock, irq_flags);
-               comedi_error(dev, "DAS800 FIFO overflow");
-               das800_cancel(dev, s);
-               async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
-               comedi_event(dev, s);
-               async->events = 0;
-               return IRQ_HANDLED;
-       }
-       if (devpriv->count > 0 || devpriv->forever == 1) {
-               /* Re-enable card's interrupt.
-                * We already have spinlock, so indirect addressing is safe */
-               outb(CONTROL1, dev->iobase + DAS800_GAIN);      /* select dev->iobase + 2 to be control register 1 */
-               outb(CONTROL1_INTE | devpriv->do_bits,
-                    dev->iobase + DAS800_CONTROL1);
-               spin_unlock_irqrestore(&dev->spinlock, irq_flags);
-               /* otherwise, stop taking data */
-       } else {
-               spin_unlock_irqrestore(&dev->spinlock, irq_flags);
-               disable_das800(dev);    /* disable hardware triggered conversions */
-               async->events |= COMEDI_CB_EOA;
-       }
-       comedi_event(dev, s);
-       async->events = 0;
-       return IRQ_HANDLED;
-}
-
-static int das800_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
-{
-       struct das800_private *devpriv = dev->private;
-
-       devpriv->forever = 0;
-       devpriv->count = 0;
-       disable_das800(dev);
-       return 0;
-}
-
 /* enable_das800 makes the card start taking hardware triggered conversions */
 static void enable_das800(struct comedi_device *dev)
 {
@@ -387,6 +271,16 @@ static int das800_set_frequency(struct comedi_device *dev)
        return 0;
 }
 
+static int das800_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
+{
+       struct das800_private *devpriv = dev->private;
+
+       devpriv->forever = 0;
+       devpriv->count = 0;
+       disable_das800(dev);
+       return 0;
+}
+
 static int das800_ai_do_cmdtest(struct comedi_device *dev,
                                struct comedi_subdevice *s,
                                struct comedi_cmd *cmd)
@@ -564,6 +458,105 @@ static int das800_ai_do_cmd(struct comedi_device *dev,
        return 0;
 }
 
+static irqreturn_t das800_interrupt(int irq, void *d)
+{
+       short i;                /* loop index */
+       short dataPoint = 0;
+       struct comedi_device *dev = d;
+       const struct das800_board *thisboard = comedi_board(dev);
+       struct das800_private *devpriv = dev->private;
+       struct comedi_subdevice *s = dev->read_subdev;  /* analog input subdevice */
+       struct comedi_async *async;
+       int status;
+       unsigned long irq_flags;
+       static const int max_loops = 128;       /*  half-fifo size for cio-das802/16 */
+       /*  flags */
+       int fifo_empty = 0;
+       int fifo_overflow = 0;
+
+       status = inb(dev->iobase + DAS800_STATUS);
+       /* if interrupt was not generated by board or driver not attached, quit */
+       if (!(status & IRQ))
+               return IRQ_NONE;
+       if (!(dev->attached))
+               return IRQ_HANDLED;
+
+       /* wait until here to initialize async, since we will get null dereference
+        * if interrupt occurs before driver is fully attached!
+        */
+       async = s->async;
+
+       /*  if hardware conversions are not enabled, then quit */
+       spin_lock_irqsave(&dev->spinlock, irq_flags);
+       outb(CONTROL1, dev->iobase + DAS800_GAIN);      /* select base address + 7 to be STATUS2 register */
+       status = inb(dev->iobase + DAS800_STATUS2) & STATUS2_HCEN;
+       /* don't release spinlock yet since we want to make sure no one else disables hardware conversions */
+       if (status == 0) {
+               spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+               return IRQ_HANDLED;
+       }
+
+       /* loop while card's fifo is not empty (and limit to half fifo for cio-das802/16) */
+       for (i = 0; i < max_loops; i++) {
+               /* read 16 bits from dev->iobase and dev->iobase + 1 */
+               dataPoint = inb(dev->iobase + DAS800_LSB);
+               dataPoint += inb(dev->iobase + DAS800_MSB) << 8;
+               if (thisboard->resolution == 12) {
+                       fifo_empty = dataPoint & FIFO_EMPTY;
+                       fifo_overflow = dataPoint & FIFO_OVF;
+                       if (fifo_overflow)
+                               break;
+               } else {
+                       fifo_empty = 0; /*  cio-das802/16 has no fifo empty status bit */
+               }
+               if (fifo_empty)
+                       break;
+               /* strip off extraneous bits for 12 bit cards */
+               if (thisboard->resolution == 12)
+                       dataPoint = (dataPoint >> 4) & 0xfff;
+               /* if there are more data points to collect */
+               if (devpriv->count > 0 || devpriv->forever == 1) {
+                       /* write data point to buffer */
+                       cfc_write_to_buffer(s, dataPoint);
+                       if (devpriv->count > 0)
+                               devpriv->count--;
+               }
+       }
+       async->events |= COMEDI_CB_BLOCK;
+       /* check for fifo overflow */
+       if (thisboard->resolution == 12) {
+               fifo_overflow = dataPoint & FIFO_OVF;
+               /*  else cio-das802/16 */
+       } else {
+               fifo_overflow = inb(dev->iobase + DAS800_GAIN) & CIO_FFOV;
+       }
+       if (fifo_overflow) {
+               spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+               comedi_error(dev, "DAS800 FIFO overflow");
+               das800_cancel(dev, s);
+               async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
+               comedi_event(dev, s);
+               async->events = 0;
+               return IRQ_HANDLED;
+       }
+       if (devpriv->count > 0 || devpriv->forever == 1) {
+               /* Re-enable card's interrupt.
+                * We already have spinlock, so indirect addressing is safe */
+               outb(CONTROL1, dev->iobase + DAS800_GAIN);      /* select dev->iobase + 2 to be control register 1 */
+               outb(CONTROL1_INTE | devpriv->do_bits,
+                    dev->iobase + DAS800_CONTROL1);
+               spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+               /* otherwise, stop taking data */
+       } else {
+               spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+               disable_das800(dev);    /* disable hardware triggered conversions */
+               async->events |= COMEDI_CB_EOA;
+       }
+       comedi_event(dev, s);
+       async->events = 0;
+       return IRQ_HANDLED;
+}
+
 static int das800_ai_rinsn(struct comedi_device *dev,
                           struct comedi_subdevice *s, struct comedi_insn *insn,
                           unsigned int *data)