bool "x86 architecture"
select CREATE_ARCH_SYMLINK
select HAVE_PRIVATE_LIBGCC
+ select USE_PRIVATE_LIBGCC
select SUPPORT_OF_CONTROL
+ select OF_CONTROL
select DM
- select DM_KEYBOARD
- select DM_SERIAL
- select DM_GPIO
- select DM_SPI
- select DM_SPI_FLASH
- select USB
- select USB_EHCI_HCD
+ select DM_PCI
+ select PCI
+ select TIMER
+ select X86_TSC_TIMER
+ imply BLK
+ imply DM_ETH
+ imply DM_GPIO
+ imply DM_KEYBOARD
+ imply DM_MMC
+ imply DM_RTC
+ imply DM_SERIAL
+ imply DM_SCSI
+ imply DM_SPI
+ imply DM_SPI_FLASH
+ imply DM_USB
+ imply DM_VIDEO
imply CMD_FPGA_LOADMK
imply CMD_GETTIME
imply CMD_IO
rev x0, x0 /* BE to LE conversion */
cpu_is_le:
ldr x5, [x11, #24]
- ldr x6, =IH_ARCH_DEFAULT
- cmp x6, x5
- b.eq 1f
+ cbz x5, 1f
#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
adr x4, secondary_switch_to_el1
ldr x4, [x11]
ldr x5, [x11, #24]
- ldr x6, =IH_ARCH_DEFAULT
- cmp x6, x5
- b.eq 2f
+ cbz x5, 2f
ldr x5, =ES_TO_AARCH32
bl switch_to_el1
u64 *table = get_spin_tbl_addr();
int i;
- for (i = 1; i < CONFIG_MAX_CPUS; i++)
- table[i * WORDS_PER_SPIN_TABLE_ENTRY +
- SPIN_TABLE_ELEM_OS_ARCH_IDX] = os_arch;
+ for (i = 1; i < CONFIG_MAX_CPUS; i++) {
+ if (os_arch == IH_ARCH_DEFAULT)
+ table[i * WORDS_PER_SPIN_TABLE_ENTRY +
+ SPIN_TABLE_ELEM_ARCH_COMP_IDX] = OS_ARCH_SAME;
+ else
+ table[i * WORDS_PER_SPIN_TABLE_ENTRY +
+ SPIN_TABLE_ELEM_ARCH_COMP_IDX] = OS_ARCH_DIFF;
+ }
}
#ifdef CONFIG_FSL_LSCH3
dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb
+dtb-$(CONFIG_RCAR_GEN3) += \
+ r8a7795-h3ulcb.dtb \
+ r8a7795-salvator-x.dtb \
+ r8a7796-m3ulcb.dtb \
+ r8a7796-salvator-x.dtb
+
dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \
keystone-k2l-evm.dtb \
keystone-k2e-evm.dtb \
--- /dev/null
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7795.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Renesas H3ULCB board based on r8a7795";
+ compatible = "renesas,h3ulcb", "renesas,r8a7795";
+
+ aliases {
+ serial0 = &scif2;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led5 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+ led6 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ key-1 {
+ linux,code = <KEY_1>;
+ label = "SW3";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ audio_clkout: audio-clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ rsnd_ak4613: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4613>;
+ };
+ };
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
+
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
+ avb_pins: avb {
+ groups = "avb_mdc";
+ function = "avb";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound-clk {
+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+ "audio_clkout_a", "audio_clkout3_a";
+ function = "audio_clk";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 3>;
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+ };
+
+ cs2000: clk-multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <11289600>;
+
+ status = "okay";
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&sdhi2 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&ssi1 {
+ shared-pin;
+};
+
+&wdt0 {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ * SSI-AK4613
+ *
+ * This command is required when Playback/Capture
+ *
+ * amixer set "DVC Out" 100%
+ * amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ * amixer set "DVC Out Mute" on
+ * amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
+ * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ * amixer set "DVC Out Ramp" on
+ * aplay xxx.wav &
+ * amixer set "DVC Out" 80% // Volume Down
+ * amixer set "DVC Out" 100% // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7795.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Renesas Salvator-X board based on r8a7795";
+ compatible = "renesas,salvator-x", "renesas,r8a7795";
+
+ aliases {
+ serial0 = &scif2;
+ serial1 = &scif1;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vcc_sdhi3: regulator-vcc-sdhi3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI3 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi3: regulator-vccq-sdhi3 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI3 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vbus0_usb2: regulator-vbus0-usb2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB20_VBUS0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ audio_clkout: audio_clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ rsnd_ak4613: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4613>;
+ };
+ };
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ port@3 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ scif1_pins: scif1 {
+ groups = "scif1_data_a", "scif1_ctrl";
+ function = "scif1";
+ };
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
+
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
+ avb_pins: avb {
+ mux {
+ groups = "avb_link", "avb_phy_int", "avb_mdc",
+ "avb_mii";
+ function = "avb";
+ };
+
+ pins_mdc {
+ groups = "avb_mdc";
+ drive-strength = <24>;
+ };
+
+ pins_mii_tx {
+ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+ "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+ drive-strength = <12>;
+ };
+ };
+
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+ function = "du";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
+ sdhi3_pins: sd3 {
+ groups = "sdhi3_data4", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <3300>;
+ };
+
+ sdhi3_pins_uhs: sd3_uhs {
+ groups = "sdhi3_data4", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+ "audio_clkout_a", "audio_clkout3_a";
+ function = "audio_clk";
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ mux {
+ groups = "usb1";
+ function = "usb1";
+ };
+
+ ovc {
+ pins = "GP_6_27";
+ bias-pull-up;
+ };
+
+ pwen {
+ pins = "GP_6_26";
+ bias-pull-down;
+ };
+ };
+
+ usb2_pins: usb2 {
+ groups = "usb2";
+ function = "usb2";
+ };
+};
+
+&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 3>;
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+ };
+
+ cs2000: clk_multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <11289600>;
+
+ status = "okay";
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&sdhi2 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&sdhi3 {
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-1 = <&sdhi3_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi3>;
+ vqmmc-supply = <&vccq_sdhi3>;
+ cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&ssi1 {
+ shared-pin;
+};
+
+&wdt0 {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
+&i2c_dvfs {
+ status = "okay";
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&xhci0 {
+ status = "okay";
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&vbus0_usb2>;
+ status = "okay";
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usb2_phy2 {
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&hsusb {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pciec0 {
+ status = "okay";
+};
+
+&pciec1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source for the r8a7795 SoC
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7795-sysc.h>
+
+/ {
+ compatible = "renesas,r8a7795";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c_dvfs;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ a57_0: cpu@0 {
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x0>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ };
+
+ a57_1: cpu@1 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x1>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA57_CPU1>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ };
+
+ a57_2: cpu@2 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x2>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA57_CPU2>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ };
+
+ a57_3: cpu@3 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x3>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA57_CPU3>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ };
+
+ a53_0: cpu@100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x100>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_1: cpu@101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x101>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU1>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_2: cpu@102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x102>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU2>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_3: cpu@103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x103>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU3>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ L2_CA57: cache-controller-0 {
+ compatible = "cache";
+ power-domains = <&sysc R8A7795_PD_CA57_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ L2_CA53: cache-controller-1 {
+ compatible = "cache";
+ power-domains = <&sysc R8A7795_PD_CA53_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ extalr_clk: extalr {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@f1010000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xf1010000 0 0x1000>,
+ <0x0 0xf1020000 0 0x20000>,
+ <0x0 0xf1040000 0 0x20000>,
+ <0x0 0xf1060000 0 0x20000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg CPG_MOD 408>;
+ clock-names = "clk";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
+ };
+
+ wdt0: watchdog@e6020000 {
+ compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7795",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 16>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7795",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 28>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7795",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 15>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7795",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 16>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7795",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 18>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7795",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7795",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 906>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 906>;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a7795",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 4>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 905>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
+ };
+
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a57_0>,
+ <&a57_1>,
+ <&a57_2>,
+ <&a57_3>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>,
+ <&a53_1>,
+ <&a53_2>,
+ <&a53_3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7795-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&extalr_clk>;
+ clock-names = "extal", "extalr";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a7795-rst";
+ reg = <0 0xe6160000 0 0x0200>;
+ };
+
+ prr: chipid@fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7795-sysc";
+ reg = <0 0xe6180000 0 0x0400>;
+ #power-domain-cells = <1>;
+ };
+
+ pfc: pfc@e6060000 {
+ compatible = "renesas,pfc-r8a7795";
+ reg = <0 0xe6060000 0 0x50c>;
+ };
+
+ intc_ex: interrupt-controller@e61c0000 {
+ compatible = "renesas,intc-ex-r8a7795", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
+ };
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a7795",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x10000>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac1: dma-controller@e7300000 {
+ compatible = "renesas,dmac-r8a7795",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7300000 0 0x10000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac2: dma-controller@e7310000 {
+ compatible = "renesas,dmac-r8a7795",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7310000 0 0x10000>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 217>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 217>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a7795",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a7795",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a7795",
+ "renesas,etheravb-rcar-gen3";
+ reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 812>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
+ phy-mode = "rgmii-txid";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ can0: can@e6c30000 {
+ compatible = "renesas,can-r8a7795",
+ "renesas,rcar-gen3-can";
+ reg = <0 0xe6c30000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>,
+ <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ status = "disabled";
+ };
+
+ can1: can@e6c38000 {
+ compatible = "renesas,can-r8a7795",
+ "renesas,rcar-gen3-can";
+ reg = <0 0xe6c38000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>,
+ <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ status = "disabled";
+ };
+
+ canfd: can@e66c0000 {
+ compatible = "renesas,r8a7795-canfd",
+ "renesas,rcar-gen3-canfd";
+ reg = <0 0xe66c0000 0 0x8000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 914>,
+ <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+
+ channel1 {
+ status = "disabled";
+ };
+ };
+
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a7795",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6540000 0 96>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 520>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x31>, <&dmac1 0x30>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 520>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a7795",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6550000 0 96>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a7795",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6560000 0 96>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 518>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x35>, <&dmac1 0x34>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 518>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a7795",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66a0000 0 96>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
+ hscif4: serial@e66b0000 {
+ compatible = "renesas,hscif-r8a7795",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66b0000 0 96>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 516>;
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7795",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x51>, <&dmac1 0x50>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7795",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x53>, <&dmac1 0x52>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e88000 {
+ compatible = "renesas,scif-r8a7795",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e88000 0 64>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x13>, <&dmac1 0x12>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 310>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6c50000 {
+ compatible = "renesas,scif-r8a7795",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a7795",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6f30000 {
+ compatible = "renesas,scif-r8a7795",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6f30000 0 64>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x5b>, <&dmac1 0x5a>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
+ status = "disabled";
+ };
+
+ i2c_dvfs: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7795",
+ "renesas,rcar-gen3-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7795",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7795",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7795",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7795",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7795",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7795",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7795",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+ };
+
+ sata: sata@ee300000 {
+ compatible = "renesas,sata-r8a7795";
+ reg = <0 0xee300000 0 0x200000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 815>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 815>;
+ status = "disabled";
+ };
+
+ xhci0: usb@ee000000 {
+ compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
+ status = "disabled";
+ };
+
+ xhci1: usb@ee0400000 {
+ compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
+ reg = <0 0xee040000 0 0xc00>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 327>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 327>;
+ status = "disabled";
+ };
+
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a7795-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a7795-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a7795";
+ reg = <0 0xee100000 0 0x2000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee120000 {
+ compatible = "renesas,sdhi-r8a7795";
+ reg = <0 0xee120000 0 0x2000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 313>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
+ status = "disabled";
+ };
+
+ sdhi2: sd@ee140000 {
+ compatible = "renesas,sdhi-r8a7795";
+ reg = <0 0xee140000 0 0x2000>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
+ status = "disabled";
+ };
+
+ sdhi3: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a7795";
+ reg = <0 0xee160000 0 0x2000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
+ status = "disabled";
+ };
+
+ usb2_phy0: usb-phy@ee080200 {
+ compatible = "renesas,usb2-phy-r8a7795",
+ "renesas,rcar-gen3-usb2-phy";
+ reg = <0 0xee080200 0 0x700>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy@ee0a0200 {
+ compatible = "renesas,usb2-phy-r8a7795",
+ "renesas,rcar-gen3-usb2-phy";
+ reg = <0 0xee0a0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 702>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb2_phy2: usb-phy@ee0c0200 {
+ compatible = "renesas,usb2-phy-r8a7795",
+ "renesas,rcar-gen3-usb2-phy";
+ reg = <0 0xee0c0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 701>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 701>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ ehci0: usb@ee080100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee080100 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ ehci1: usb@ee0a0100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee0a0100 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
+ status = "disabled";
+ };
+
+ ehci2: usb@ee0c0100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee0c0100 0 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 701>;
+ phys = <&usb2_phy2>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 701>;
+ status = "disabled";
+ };
+
+ ohci0: usb@ee080000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee080000 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ ohci1: usb@ee0a0000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee0a0000 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
+ status = "disabled";
+ };
+
+ ohci2: usb@ee0c0000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee0c0000 0 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 701>;
+ phys = <&usb2_phy2>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 701>;
+ status = "disabled";
+ };
+
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7795",
+ "renesas,rcar-gen3-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
+ };
+
+ pciec0: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a7795",
+ "renesas,pcie-rcar-gen3";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ status = "disabled";
+ };
+
+ pciec1: pcie@ee800000 {
+ compatible = "renesas,pcie-r8a7795",
+ "renesas,pcie-rcar-gen3";
+ reg = <0 0xee800000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
+ 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
+ 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
+ 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
+ status = "disabled";
+ };
+
+ vspbc: vsp@fe920000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe920000 0 0x8000>;
+ interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 624>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 624>;
+
+ renesas,fcp = <&fcpvb1>;
+ };
+
+ fcpvb1: fcp@fe92f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe92f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 606>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 606>;
+ };
+
+ fcpf0: fcp@fe950000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe950000 0 0x200>;
+ clocks = <&cpg CPG_MOD 615>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 615>;
+ };
+
+ fcpf1: fcp@fe951000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe951000 0 0x200>;
+ clocks = <&cpg CPG_MOD 614>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 614>;
+ };
+
+ fcpf2: fcp@fe952000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe952000 0 0x200>;
+ clocks = <&cpg CPG_MOD 613>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 613>;
+ };
+
+ vspbd: vsp@fe960000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe960000 0 0x8000>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 626>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 626>;
+
+ renesas,fcp = <&fcpvb0>;
+ };
+
+ fcpvb0: fcp@fe96f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe96f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 607>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 607>;
+ };
+
+ vspi0: vsp@fe9a0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9a0000 0 0x8000>;
+ interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 631>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 631>;
+
+ renesas,fcp = <&fcpvi0>;
+ };
+
+ fcpvi0: fcp@fe9af000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9af000 0 0x200>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 611>;
+ };
+
+ vspi1: vsp@fe9b0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9b0000 0 0x8000>;
+ interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 630>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 630>;
+
+ renesas,fcp = <&fcpvi1>;
+ };
+
+ fcpvi1: fcp@fe9bf000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9bf000 0 0x200>;
+ clocks = <&cpg CPG_MOD 610>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 610>;
+ };
+
+ vspi2: vsp@fe9c0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9c0000 0 0x8000>;
+ interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 629>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 629>;
+
+ renesas,fcp = <&fcpvi2>;
+ };
+
+ fcpvi2: fcp@fe9cf000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9cf000 0 0x200>;
+ clocks = <&cpg CPG_MOD 609>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 609>;
+ };
+
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x4000>;
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+
+ renesas,fcp = <&fcpvd0>;
+ };
+
+ fcpvd0: fcp@fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
+ };
+
+ vspd1: vsp@fea28000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea28000 0 0x4000>;
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 622>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
+
+ renesas,fcp = <&fcpvd1>;
+ };
+
+ fcpvd1: fcp@fea2f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea2f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 602>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 602>;
+ };
+
+ vspd2: vsp@fea30000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea30000 0 0x4000>;
+ interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 621>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 621>;
+
+ renesas,fcp = <&fcpvd2>;
+ };
+
+ fcpvd2: fcp@fea37000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea37000 0 0x200>;
+ clocks = <&cpg CPG_MOD 601>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 601>;
+ };
+
+ vspd3: vsp@fea38000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea38000 0 0x4000>;
+ interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 620>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 620>;
+
+ renesas,fcp = <&fcpvd3>;
+ };
+
+ fcpvd3: fcp@fea3f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea3f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 600>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 600>;
+ };
+
+ fdp1@fe940000 {
+ compatible = "renesas,fdp1";
+ reg = <0 0xfe940000 0 0x2400>;
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 119>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 119>;
+ renesas,fcp = <&fcpf0>;
+ };
+
+ fdp1@fe944000 {
+ compatible = "renesas,fdp1";
+ reg = <0 0xfe944000 0 0x2400>;
+ interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 118>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 118>;
+ renesas,fcp = <&fcpf1>;
+ };
+
+ fdp1@fe948000 {
+ compatible = "renesas,fdp1";
+ reg = <0 0xfe948000 0 0x2400>;
+ interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 117>;
+ power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 117>;
+ renesas,fcp = <&fcpf2>;
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a7795";
+ reg = <0 0xfeb00000 0 0x80000>,
+ <0 0xfeb90000 0 0x14>;
+ reg-names = "du", "lvds.0";
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 721>,
+ <&cpg CPG_MOD 727>;
+ clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+ status = "disabled";
+
+ vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_hdmi0: endpoint {
+ };
+ };
+ port@2 {
+ reg = <2>;
+ du_out_hdmi1: endpoint {
+ };
+ };
+ port@3 {
+ reg = <3>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a7795-thermal";
+ reg = <0 0xe6198000 0 0x68>,
+ <0 0xe61a0000 0 0x5c>,
+ <0 0xe61a8000 0 0x5c>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <1>;
+ status = "okay";
+ };
+
+ thermal-zones {
+ sensor_thermal1: sensor-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal2: sensor-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal3: sensor-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
+
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7796.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Renesas M3ULCB board based on r8a7796";
+ compatible = "renesas,m3ulcb", "renesas,r8a7796";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led5 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+ led6 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ key-1 {
+ linux,code = <KEY_1>;
+ label = "SW3";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&sdhi2 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&wdt0 {
+ timeout-sec = <60>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7796.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Renesas Salvator-X board based on r8a7796";
+ compatible = "renesas,salvator-x", "renesas,r8a7796";
+
+ aliases {
+ serial0 = &scif2;
+ serial1 = &scif1;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x80000000>;
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vcc_sdhi3: regulator-vcc-sdhi3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI3 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi3: regulator-vccq-sdhi3 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI3 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ avb_pins: avb {
+ groups = "avb_mdc";
+ function = "avb";
+ };
+
+ scif1_pins: scif1 {
+ groups = "scif1_data_a", "scif1_ctrl";
+ function = "scif1";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
+
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
+ sdhi3_pins: sd3 {
+ groups = "sdhi3_data4", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <3300>;
+ };
+
+ sdhi3_pins_uhs: sd3_uhs {
+ groups = "sdhi3_data4", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&sdhi2 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&sdhi3 {
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-1 = <&sdhi3_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi3>;
+ vqmmc-supply = <&vccq_sdhi3>;
+ cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&wdt0 {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&i2c_dvfs {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source for the r8a7796 SoC
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7796-sysc.h>
+
+/ {
+ compatible = "renesas,r8a7796";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c_dvfs;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ a57_0: cpu@0 {
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x0>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ };
+
+ a57_1: cpu@1 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x1>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7796_PD_CA57_CPU1>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ };
+
+ a53_0: cpu@100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x100>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7796_PD_CA53_CPU0>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_1: cpu@101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x101>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7796_PD_CA53_CPU1>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_2: cpu@102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x102>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7796_PD_CA53_CPU2>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_3: cpu@103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x103>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7796_PD_CA53_CPU3>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ L2_CA57: cache-controller-0 {
+ compatible = "cache";
+ power-domains = <&sysc R8A7796_PD_CA57_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ L2_CA53: cache-controller-1 {
+ compatible = "cache";
+ power-domains = <&sysc R8A7796_PD_CA53_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ extalr_clk: extalr {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@f1010000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xf1010000 0 0x1000>,
+ <0x0 0xf1020000 0 0x20000>,
+ <0x0 0xf1040000 0 0x20000>,
+ <0x0 0xf1060000 0 0x20000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg CPG_MOD 408>;
+ clock-names = "clk";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ wdt0: watchdog@e6020000 {
+ compatible = "renesas,r8a7796-wdt",
+ "renesas,rcar-gen3-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7796",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 16>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7796",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 29>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7796",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 15>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7796",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 16>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7796",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 18>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7796",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7796",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 906>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 906>;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a7796",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 4>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 905>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
+ };
+
+ pfc: pin-controller@e6060000 {
+ compatible = "renesas,pfc-r8a7796";
+ reg = <0 0xe6060000 0 0x50c>;
+ };
+
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a57_0>,
+ <&a57_1>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>,
+ <&a53_1>,
+ <&a53_2>,
+ <&a53_3>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7796-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&extalr_clk>;
+ clock-names = "extal", "extalr";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a7796-rst";
+ reg = <0 0xe6160000 0 0x0200>;
+ };
+
+ prr: chipid@fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7796-sysc";
+ reg = <0 0xe6180000 0 0x0400>;
+ #power-domain-cells = <1>;
+ };
+
+ i2c_dvfs: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7796",
+ "renesas,rcar-gen3-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+ <&dmac2 0x91>, <&dmac2 0x90>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+ <&dmac2 0x93>, <&dmac2 0x92>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+ <&dmac2 0x95>, <&dmac2 0x94>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ can0: can@e6c30000 {
+ compatible = "renesas,can-r8a7796",
+ "renesas,rcar-gen3-can";
+ reg = <0 0xe6c30000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>,
+ <&cpg CPG_CORE R8A7796_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ status = "disabled";
+ };
+
+ can1: can@e6c38000 {
+ compatible = "renesas,can-r8a7796",
+ "renesas,rcar-gen3-can";
+ reg = <0 0xe6c38000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>,
+ <&cpg CPG_CORE R8A7796_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ status = "disabled";
+ };
+
+ canfd: can@e66c0000 {
+ compatible = "renesas,r8a7796-canfd",
+ "renesas,rcar-gen3-canfd";
+ reg = <0 0xe66c0000 0 0x8000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 914>,
+ <&cpg CPG_CORE R8A7796_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+
+ channel1 {
+ status = "disabled";
+ };
+ };
+
+ avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a7796",
+ "renesas,etheravb-rcar-gen3";
+ reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 812>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
+ phy-mode = "rgmii-txid";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a7796",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6540000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 520>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+ <&dmac2 0x31>, <&dmac2 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 520>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a7796",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6550000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+ <&dmac2 0x33>, <&dmac2 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a7796",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6560000 0 0x60>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 518>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+ <&dmac2 0x35>, <&dmac2 0x34>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 518>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a7796",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
+ hscif4: serial@e66b0000 {
+ compatible = "renesas,hscif-r8a7796",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66b0000 0 0x60>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 516>;
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7796",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+ <&dmac2 0x51>, <&dmac2 0x50>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7796",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+ <&dmac2 0x53>, <&dmac2 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e88000 {
+ compatible = "renesas,scif-r8a7796",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e88000 0 64>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 310>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6c50000 {
+ compatible = "renesas,scif-r8a7796",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a7796",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6f30000 {
+ compatible = "renesas,scif-r8a7796",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6f30000 0 64>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>,
+ <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+ <&dmac2 0x5b>, <&dmac2 0x5a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
+ status = "disabled";
+ };
+
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a7796",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 211>;
+ dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+ <&dmac2 0x41>, <&dmac2 0x40>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a7796",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 210>;
+ dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+ <&dmac2 0x43>, <&dmac2 0x42>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 210>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a7796",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 209>;
+ dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 209>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a7796",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a7796",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x10000>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac1: dma-controller@e7300000 {
+ compatible = "renesas,dmac-r8a7796",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7300000 0 0x10000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac2: dma-controller@e7310000 {
+ compatible = "renesas,dmac-r8a7796",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7310000 0 0x10000>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 217>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 217>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a7796";
+ reg = <0 0xee100000 0 0x2000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee120000 {
+ compatible = "renesas,sdhi-r8a7796";
+ reg = <0 0xee120000 0 0x2000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 313>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
+ status = "disabled";
+ };
+
+ sdhi2: sd@ee140000 {
+ compatible = "renesas,sdhi-r8a7796";
+ reg = <0 0xee140000 0 0x2000>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
+ status = "disabled";
+ };
+
+ sdhi3: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a7796";
+ reg = <0 0xee160000 0 0x2000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
+ status = "disabled";
+ };
+
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a7796-thermal";
+ reg = <0 0xe6198000 0 0x68>,
+ <0 0xe61a0000 0 0x5c>,
+ <0 0xe61a8000 0 0x5c>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <1>;
+ status = "okay";
+ };
+
+ thermal-zones {
+ sensor_thermal1: sensor-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal2: sensor-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal3: sensor-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
+
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+ };
+};
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
cd-inverted;
status = "okay";
};
* uint64_t entry_addr;
* uint64_t status;
* uint64_t lpid;
-* uint64_t os_arch;
+* uint64_t arch_comp;
* };
* we pad this struct to 64 bytes so each entry is in its own cacheline
* the actual spin table is an array of these structures
#define SPIN_TABLE_ELEM_ENTRY_ADDR_IDX 0
#define SPIN_TABLE_ELEM_STATUS_IDX 1
#define SPIN_TABLE_ELEM_LPID_IDX 2
-#define SPIN_TABLE_ELEM_OS_ARCH_IDX 3
+/* compare os arch and cpu arch */
+#define SPIN_TABLE_ELEM_ARCH_COMP_IDX 3
#define WORDS_PER_SPIN_TABLE_ENTRY 8 /* pad to 64 bytes */
#define SPIN_TABLE_ELEM_SIZE 64
+/* os arch is same as cpu arch */
+#define OS_ARCH_SAME 0
+/* os arch is different from cpu arch */
+#define OS_ARCH_DIFF 1
+
#define id_to_core(x) ((x & 3) | (x >> 6))
#ifndef __ASSEMBLY__
extern u64 __spin_table[];
u32 cpu_pos_mask(void);
#endif
-#define IH_ARCH_ARM 2 /* ARM */
-#define IH_ARCH_ARM64 22 /* ARM64 */
-
#endif /* _FSL_LAYERSCAPE_MP_H */
#define SVR_LS2084A 0x870910
#define SVR_LS2048A 0x870920
#define SVR_LS2044A 0x870930
-#define SVR_LS2081A 0x870919
-#define SVR_LS2041A 0x870915
+#define SVR_LS2081A 0x870918
+#define SVR_LS2041A 0x870914
#define SVR_DEV_LS2080A 0x8701
help
Support for Renesas R-Car Gen3 platform
+config TARGET_ULCB
+ bool "ULCB board"
+ help
+ Support for Renesas R-Car Gen3 ULCB platform
+
endchoice
config SYS_SOC
default "rmobile"
source "board/renesas/salvator-x/Kconfig"
+source "board/renesas/ulcb/Kconfig"
endif
#define CONFIG_SYS_SH_SDHI3_BASE 0xEE160000
/* PFC */
+#define PFC_PUEN5 0xE6060414
+#define PUEN_SSI_SDATA4 BIT(17)
#define PFC_PUEN6 0xE6060418
#define PUEN_USB1_OVC (1 << 2)
#define PUEN_USB1_PWEN (1 << 1)
/* First check the CCSR base address */
off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4);
- if (off > 0)
- addr = fdt_get_base_address(fdt, off);
+ if (off > 0) {
+ int size;
+ u32 naddr;
+ const fdt32_t *prop;
+
+ naddr = fdt_address_cells(fdt, off);
+ prop = fdt_getprop(fdt, off, "ranges", &size);
+ addr = fdt_translate_address(fdt, off, prop + naddr);
+ }
if (!addr) {
printf("Warning: could not determine base CCSR address in "
address of 0xfff90000 indicates that the image will be put at offset
0x90000 from the beginning of a 1MB flash device.
+config ROM_TABLE_ADDR
+ hex
+ default 0xf0000
+ help
+ All x86 tables happen to like the address range from 0x0f0000
+ to 0x100000. We use 0xf0000 as the starting address to store
+ those tables, including PIRQ routing table, Multi-Processor
+ table and ACPI table.
+
+config ROM_TABLE_SIZE
+ hex
+ default 0x10000
+
menu "System tables"
depends on !EFI && !SYS_COREBOOT
PLATFORM_CPPFLAGS += -fno-strict-aliasing
PLATFORM_CPPFLAGS += -fomit-frame-pointer
PF_CPPFLAGS_X86 := $(call cc-option, -fno-toplevel-reorder, \
- $(call cc-option, -fno-unit-at-a-time)) \
- $(call cc-option, -mpreferred-stack-boundary=2)
+ $(call cc-option, -fno-unit-at-a-time))
PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_X86)
PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm
ifeq ($(IS_32BIT),y)
PLATFORM_CPPFLAGS += -march=i386 -m32
else
-PLATFORM_CPPFLAGS += $(if $(CONFIG_SPL_BUILD),,-fpic) -fno-common
+PLATFORM_CPPFLAGS += $(if $(CONFIG_SPL_BUILD),,-fpic) -fno-common -m64
endif
PLATFORM_RELFLAGS += -ffunction-sections -fvisibility=hidden
config INTEL_BAYTRAIL
bool
select HAVE_FSP if !EFI
+ select ARCH_MISC_INIT if !EFI
+ imply HAVE_INTEL_ME if !EFI
+ imply ENABLE_MRC_CACHE
imply ENV_IS_IN_SPI_FLASH
+ imply AHCI_PCI
+ imply ICH_SPI
+ imply INTEL_ICH6_GPIO
+ imply MMC
+ imply MMC_PCI
+ imply MMC_SDHCI
+ imply MMC_SDHCI_SDMA
+ imply SCSI
+ imply SPI_FLASH
+ imply SYS_NS16550
+ imply USB
+ imply USB_EHCI_HCD
+ imply USB_XHCI_HCD
+ imply VIDEO_VESA
if INTEL_BAYTRAIL
config INTERNAL_UART
#include <asm/mrccache.h>
#include <asm/post.h>
-static struct pci_device_id mmc_supported[] = {
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_SDIO },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_SD },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_EMMC2 },
- {},
-};
-
-int cpu_mmc_init(bd_t *bis)
-{
- return pci_mmc_init("ValleyView SDHCI", mmc_supported);
-}
-
#ifndef CONFIG_EFI_APP
int arch_cpu_init(void)
{
config INTEL_BROADWELL
bool
select CACHE_MRC_BIN
+ select ARCH_EARLY_INIT_R
+ imply HAVE_INTEL_ME
+ imply ENABLE_MRC_CACHE
+ imply ENV_IS_IN_SPI_FLASH
+ imply AHCI_PCI
+ imply ICH_SPI
+ imply INTEL_BROADWELL_GPIO
+ imply SCSI
+ imply SPI_FLASH
+ imply USB
+ imply USB_EHCI_HCD
+ imply VIDEO_BROADWELL_IGD
if INTEL_BROADWELL
uint32_t padding[4];
} __packed;
-int cpu_run_reference_code(void)
+/**
+ * cpu_run_reference_code() - Run the platform reference code
+ *
+ * Some platforms require a binary blob to be executed once SDRAM is
+ * available. This is used to set up various platform features, such as the
+ * platform controller hub (PCH). This function should be implemented by the
+ * CPU-specific code.
+ *
+ * @return 0 on success, -ve on failure
+ */
+static int cpu_run_reference_code(void)
{
struct pei_data _pei_data __aligned(8);
struct pei_data *pei_data = &_pei_data;
return 0;
}
+
+int arch_early_init_r(void)
+{
+ return cpu_run_reference_code();
+}
config SYS_COREBOOT
bool
default y
+ imply ENV_IS_NOWHERE
+ imply AHCI_PCI
+ imply E1000
+ imply ICH_SPI
+ imply MMC
+ imply MMC_PCI
+ imply MMC_SDHCI
+ imply MMC_SDHCI_SDMA
+ imply SPI_FLASH
+ imply SYS_NS16550
+ imply USB
+ imply USB_EHCI_HCD
+ imply USB_XHCI_HCD
+ imply VIDEO_COREBOOT
imply CMD_CBFS
imply FS_CBFS
return x86_cpu_init_f();
}
-int board_early_init_f(void)
-{
- return 0;
-}
-
int checkcpu(void)
{
return 0;
{
return 0;
}
-
-int arch_misc_init(void)
-{
- return 0;
-}
return 0;
}
-int board_early_init_f(void)
-{
- return 0;
-}
-
int checkcpu(void)
{
return 0;
{
return 0;
}
-
-int arch_misc_init(void)
-{
- return 0;
-}
config NORTHBRIDGE_INTEL_IVYBRIDGE
bool
select CACHE_MRC_BIN if HAVE_MRC
+ imply HAVE_INTEL_ME
+ imply ENABLE_MRC_CACHE
+ imply ENV_IS_IN_SPI_FLASH
+ imply AHCI_PCI
+ imply ICH_SPI
+ imply INTEL_ICH6_GPIO
+ imply SCSI
+ imply SPI_FLASH
+ imply USB
+ imply USB_EHCI_HCD
+ imply VIDEO_VESA
if NORTHBRIDGE_INTEL_IVYBRIDGE
bd82x6x_sata_enable(dev);
else {
bd82x6x_sata_init(dev, pch);
- ret = ahci_probe_scsi(dev);
+ ret = ahci_probe_scsi_pci(dev);
if (ret)
return ret;
}
uint32_t tseg_base, uma_size, tolud;
uint64_t tom, me_base, touud;
uint64_t uma_memory_base = 0;
- uint64_t uma_memory_size;
unsigned long long tomk;
uint16_t ggc;
u32 val;
tolud += uma_size << 10;
/* UMA starts at old TOLUD */
uma_memory_base = tomk * 1024ULL;
- uma_memory_size = uma_size * 1024ULL;
debug("ME UMA base %llx size %uM\n", me_base, uma_size >> 10);
}
debug("%uM UMA", uma_size >> 10);
tomk -= uma_size;
uma_memory_base = tomk * 1024ULL;
- uma_memory_size += uma_size * 1024ULL;
/* GTT Graphics Stolen Memory Size (GGMS) */
uma_size = ((ggc >> 8) & 0x3) * 1024ULL;
tomk -= uma_size;
uma_memory_base = tomk * 1024ULL;
- uma_memory_size += uma_size * 1024ULL;
debug(" and %uM GTT\n", uma_size >> 10);
}
uma_size = (uma_memory_base - tseg_base) >> 10;
tomk -= uma_size;
uma_memory_base = tomk * 1024ULL;
- uma_memory_size += uma_size * 1024ULL;
debug("TSEG base 0x%08x size %uM\n", tseg_base, uma_size >> 10);
debug("Available memory below 4GB: %lluM\n", tomk >> 10);
config QEMU
bool
+ select ARCH_EARLY_INIT_R
+ imply ENV_IS_NOWHERE
+ imply AHCI_PCI
+ imply E1000
+ imply SYS_NS16550
+ imply USB
+ imply USB_EHCI_HCD
+ imply VIDEO_VESA
if QEMU
config INTEL_QUARK
bool
select HAVE_RMU
+ select ARCH_EARLY_INIT_R
+ select ARCH_MISC_INIT
+ imply ENABLE_MRC_CACHE
+ imply ENV_IS_IN_SPI_FLASH
+ imply ETH_DESIGNWARE
+ imply ICH_SPI
+ imply INTEL_ICH6_GPIO
+ imply MMC
+ imply MMC_PCI
+ imply MMC_SDHCI
+ imply MMC_SDHCI_SDMA
+ imply SPI_FLASH
+ imply SYS_NS16550
+ imply USB
+ imply USB_EHCI_HCD
if INTEL_QUARK
#include <asm/arch/msg_port.h>
#include <asm/arch/quark.h>
-static struct pci_device_id mmc_supported[] = {
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_SDIO },
- {},
-};
-
static void quark_setup_mtrr(void)
{
u32 base, mask;
return 0;
}
-int cpu_mmc_init(bd_t *bis)
-{
- return pci_mmc_init("Quark SDHCI", mmc_supported);
-}
-
int arch_misc_init(void)
{
#ifdef CONFIG_ENABLE_MRC_CACHE
bool
select HAVE_FSP
select HAVE_CMC
+ select ARCH_EARLY_INIT_R
+ imply ENV_IS_IN_SPI_FLASH
+ imply AHCI_PCI
+ imply ICH_SPI
+ imply INTEL_ICH6_GPIO
+ imply MMC
+ imply MMC_PCI
+ imply MMC_SDHCI
+ imply MMC_SDHCI_SDMA
+ imply PCH_GBE
+ imply SCSI
+ imply SPI_FLASH
+ imply SYS_NS16550
+ imply USB
+ imply USB_EHCI_HCD
+ imply VIDEO_VESA
if INTEL_QUEENSBAY
#
obj-y += fsp_configs.o irq.o
-obj-y += tnc.o topcliff.o
+obj-y += tnc.o
+++ /dev/null
-/*
- * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mmc.h>
-#include <pci_ids.h>
-
-static struct pci_device_id mmc_supported[] = {
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SDIO_0 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SDIO_1 },
- {},
-};
-
-int cpu_mmc_init(bd_t *bis)
-{
- return pci_mmc_init("Topcliff SDHCI", mmc_supported);
-}
config INTEL_TANGIER
bool
depends on INTEL_MID
+ imply INTEL_MID_SERIAL
+ imply MMC
+ imply MMC_SDHCI
+ imply MMC_SDHCI_SDMA
+ imply MMC_SDHCI_TANGIER
+ imply TANGIER_WATCHDOG
+ imply USB
+ imply USB_DWC3
config SYS_CAR_ADDR
hex
*/
u32 cpu_get_stepping(void);
-/**
- * cpu_run_reference_code() - Run the platform reference code
- *
- * Some platforms require a binary blob to be executed once SDRAM is
- * available. This is used to set up various platform features, such as the
- * platform controller hub (PCH). This function should be implemented by the
- * CPU-specific code.
- *
- * @return 0 on success, -ve on failure
- */
-int cpu_run_reference_code(void);
-
#endif
#include <tables_csum.h>
-/*
- * All x86 tables happen to like the address range from 0xf0000 to 0x100000.
- * We use 0xf0000 as the starting address to store those tables, including
- * PIRQ routing table, Multi-Processor table and ACPI table.
- */
-#define ROM_TABLE_ADDR 0xf0000
-#define ROM_TABLE_END 0xfffff
+#define ROM_TABLE_ADDR CONFIG_ROM_TABLE_ADDR
+#define ROM_TABLE_END (CONFIG_ROM_TABLE_ADDR + CONFIG_ROM_TABLE_SIZE - 1)
#define ROM_TABLE_ALIGN 1024
select X86_RESET_VECTOR if !EFI_STUB
select INTEL_BAYTRAIL
select BOARD_ROMSIZE_KB_8192
+ select BOARD_EARLY_INIT_F
+ select SPI_FLASH_MACRONIX
config PCIE_ECAM_BASE
default 0xe0000000
return 0;
}
-
-int arch_early_init_r(void)
-{
- return 0;
-}
select X86_RESET_VECTOR if !EFI_STUB
select INTEL_BAYTRAIL
select BOARD_ROMSIZE_KB_8192
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select SPI_FLASH_STMICRO
config PCIE_ECAM_BASE
default 0xe0000000
return 0;
}
-int arch_early_init_r(void)
-{
- return 0;
-}
-
int board_late_init(void)
{
struct udevice *dev;
config SYS_TEXT_BASE
default 0x01110000
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ imply SPI_FLASH_ATMEL
+ imply SPI_FLASH_EON
+ imply SPI_FLASH_GIGADEVICE
+ imply SPI_FLASH_MACRONIX
+ imply SPI_FLASH_SPANSION
+ imply SPI_FLASH_STMICRO
+ imply SPI_FLASH_SST
+ imply SPI_FLASH_WINBOND
+
comment "coreboot-specific options"
config SYS_CONFIG_NAME
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += coreboot_start.o coreboot.o
+obj-y += coreboot_start.o
+++ /dev/null
-/*
- * Copyright (C) 2013 Google, Inc
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <cros_ec.h>
-#include <asm/gpio.h>
-
-int arch_early_init_r(void)
-{
- return 0;
-}
select X86_RESET_VECTOR if !EFI_STUB
select INTEL_BAYTRAIL
select BOARD_ROMSIZE_KB_8192
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select SPI_FLASH_STMICRO
config PCIE_ECAM_BASE
default 0xe0000000
*/
#include <common.h>
-#include <asm/gpio.h>
-
-int arch_early_init_r(void)
-{
- return 0;
-}
* bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script)
*/
setenv("bootdelay", "0");
+
+#ifdef CONFIG_ARM
+ setenv("secureboot", "y");
+#else
setenv("bootcmd", CONFIG_CHAIN_BOOT_CMD);
+#endif
+
return 0;
}
#endif
{
void *fdt = get_fdt_virt();
uint64_t r;
+ int size, node;
+ u32 naddr;
+ const fdt32_t *prop;
/*
* To be able to read the FDT we need to create a temporary TLB
* map for it.
*/
map_fdt_as(10);
- r = fdt_get_base_address(fdt, fdt_path_offset(fdt, "/soc"));
+ node = fdt_path_offset(fdt, "/soc");
+ naddr = fdt_address_cells(fdt, node);
+ prop = fdt_getprop(fdt, node, "ranges", &size);
+ r = fdt_translate_address(fdt, node, prop + naddr);
disable_tlb(10);
return r;
select NORTHBRIDGE_INTEL_IVYBRIDGE
select HAVE_INTEL_ME
select BOARD_ROMSIZE_KB_8192
+ select SPI_FLASH_WINBOND
config PCIE_ECAM_BASE
default 0xf0000000
*/
#include <common.h>
-#include <cros_ec.h>
-#include <dm.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/arch/pch.h>
-
-int arch_early_init_r(void)
-{
- return 0;
-}
-
-int board_early_init_f(void)
-{
- return 0;
-}
select INTEL_BROADWELL
select HAVE_INTEL_ME
select BOARD_ROMSIZE_KB_8192
+ select SPI_FLASH_WINBOND
config PCIE_ECAM_BASE
default 0xf0000000
*/
#include <common.h>
-#include <asm/cpu.h>
-
-int arch_early_init_r(void)
-{
- return cpu_run_reference_code();
-}
-
-int board_early_init_f(void)
-{
- return 0;
-}
select NORTHBRIDGE_INTEL_IVYBRIDGE
select HAVE_INTEL_ME
select BOARD_ROMSIZE_KB_8192
+ select SPI_FLASH_WINBOND
config SYS_CAR_ADDR
hex
*/
#include <common.h>
-#include <asm/arch/pch.h>
-
-int arch_early_init_r(void)
-{
- return 0;
-}
-
-int board_early_init_f(void)
-{
- return 0;
-}
select X86_RESET_VECTOR
select INTEL_BAYTRAIL
select BOARD_ROMSIZE_KB_8192
+ select SPI_FLASH_WINBOND
config PCIE_ECAM_BASE
default 0xe0000000
select NORTHBRIDGE_INTEL_IVYBRIDGE
select HAVE_FSP
select BOARD_ROMSIZE_KB_2048
+ select BOARD_EARLY_INIT_F
+ select SPI_FLASH_WINBOND
endif
select X86_RESET_VECTOR
select INTEL_QUEENSBAY
select BOARD_ROMSIZE_KB_1024
+ select BOARD_EARLY_INIT_F
+ select SPI_FLASH_SST
endif
select X86_RESET_VECTOR
select INTEL_QUARK
select BOARD_ROMSIZE_KB_1024
+ select SPI_FLASH_WINBOND
config SMBIOS_PRODUCT_NAME
default "GalileoGen2"
#include <asm/arch/device.h>
#include <asm/arch/quark.h>
-int board_early_init_f(void)
-{
- return 0;
-}
-
/*
* Intel Galileo gen2 board uses GPIO Resume Well bank pin0 as the PERST# pin.
*
select X86_RESET_VECTOR if !EFI_STUB
select INTEL_BAYTRAIL
select BOARD_ROMSIZE_KB_8192
+ select SPI_FLASH_STMICRO
config PCIE_ECAM_BASE
default 0xe0000000
#define GPIO_BANKE_NAME "gpioe"
-int arch_early_init_r(void)
-{
- return 0;
-}
-
int misc_init_r(void)
{
struct udevice *dev;
--- /dev/null
+if TARGET_ULCB
+
+config SYS_SOC
+ default "rmobile"
+
+config SYS_BOARD
+ default "ulcb"
+
+config SYS_VENDOR
+ default "renesas"
+
+config SYS_CONFIG_NAME
+ default "ulcb"
+
+endif
--- /dev/null
+ULCB BOARD
+M: Marek Vasut <marek.vasut+renesas@gmail.com>
+S: Maintained
+F: board/renesas/ulcb/
+F: include/configs/ulcb.h
+F: configs/r8a7795_ulcb_defconfig
+F: configs/r8a7796_ulcb_defconfig
--- /dev/null
+#
+# board/renesas/ulcb/Makefile
+#
+# Copyright (C) 2017 Renesas Electronics Corporation
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := ulcb.o cpld.o ../rcar-common/common.o
--- /dev/null
+/*
+ * ULCB board CPLD access support
+ *
+ * Copyright (C) 2017 Renesas Electronics Corporation
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#define SCLK GPIO_GP_6_8
+#define SSTBZ GPIO_GP_2_3
+#define MOSI GPIO_GP_6_7
+#define MISO GPIO_GP_6_10
+
+#define CPLD_ADDR_MODE 0x00 /* RW */
+#define CPLD_ADDR_MUX 0x02 /* RW */
+#define CPLD_ADDR_DIPSW6 0x08 /* R */
+#define CPLD_ADDR_RESET 0x80 /* RW */
+#define CPLD_ADDR_VERSION 0xFF /* R */
+
+static int cpld_initialized;
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ /* Always valid */
+ return 1;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ /* Always active */
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ /* Always active */
+}
+
+void ulcb_softspi_sda(int set)
+{
+ gpio_set_value(MOSI, set);
+}
+
+void ulcb_softspi_scl(int set)
+{
+ gpio_set_value(SCLK, set);
+}
+
+unsigned char ulcb_softspi_read(void)
+{
+ return !!gpio_get_value(MISO);
+}
+
+static void cpld_rw(u8 write)
+{
+ gpio_set_value(MOSI, write);
+ gpio_set_value(SSTBZ, 0);
+ gpio_set_value(SCLK, 1);
+ gpio_set_value(SCLK, 0);
+ gpio_set_value(SSTBZ, 1);
+}
+
+static u32 cpld_read(u8 addr)
+{
+ u32 data = 0;
+
+ spi_xfer(NULL, 8, &addr, NULL, SPI_XFER_BEGIN | SPI_XFER_END);
+
+ cpld_rw(0);
+
+ spi_xfer(NULL, 32, NULL, &data, SPI_XFER_BEGIN | SPI_XFER_END);
+
+ return swab32(data);
+}
+
+static void cpld_write(u8 addr, u32 data)
+{
+ data = swab32(data);
+
+ spi_xfer(NULL, 32, &data, NULL, SPI_XFER_BEGIN | SPI_XFER_END);
+
+ spi_xfer(NULL, 8, NULL, &addr, SPI_XFER_BEGIN | SPI_XFER_END);
+
+ cpld_rw(1);
+}
+
+static void cpld_init(void)
+{
+ if (cpld_initialized)
+ return;
+
+ /* PULL-UP on MISO line */
+ setbits_le32(PFC_PUEN5, PUEN_SSI_SDATA4);
+
+ gpio_request(SCLK, NULL);
+ gpio_request(SSTBZ, NULL);
+ gpio_request(MOSI, NULL);
+ gpio_request(MISO, NULL);
+
+ gpio_direction_output(SCLK, 0);
+ gpio_direction_output(SSTBZ, 1);
+ gpio_direction_output(MOSI, 0);
+ gpio_direction_input(MISO);
+
+ /* Dummy read */
+ cpld_read(CPLD_ADDR_VERSION);
+
+ cpld_initialized = 1;
+}
+
+static int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ u32 addr, val;
+
+ cpld_init();
+
+ if (argc == 2 && strcmp(argv[1], "info") == 0) {
+ printf("CPLD version:\t\t\t0x%08x\n",
+ cpld_read(CPLD_ADDR_VERSION));
+ printf("H3 Mode setting (MD0..28):\t0x%08x\n",
+ cpld_read(CPLD_ADDR_MODE));
+ printf("Multiplexer settings:\t\t0x%08x\n",
+ cpld_read(CPLD_ADDR_MUX));
+ printf("DIPSW (SW6):\t\t\t0x%08x\n",
+ cpld_read(CPLD_ADDR_DIPSW6));
+ return 0;
+ }
+
+ if (argc < 3)
+ return CMD_RET_USAGE;
+
+ addr = simple_strtoul(argv[2], NULL, 16);
+ if (!(addr == CPLD_ADDR_VERSION || addr == CPLD_ADDR_MODE ||
+ addr == CPLD_ADDR_MUX || addr == CPLD_ADDR_DIPSW6 ||
+ addr == CPLD_ADDR_RESET)) {
+ printf("Invalid CPLD register address\n");
+ return CMD_RET_USAGE;
+ }
+
+ if (argc == 3 && strcmp(argv[1], "read") == 0) {
+ printf("0x%x\n", cpld_read(addr));
+ } else if (argc == 4 && strcmp(argv[1], "write") == 0) {
+ val = simple_strtoul(argv[3], NULL, 16);
+ cpld_write(addr, val);
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ cpld, 4, 1, do_cpld,
+ "CPLD access",
+ "info\n"
+ "cpld read addr\n"
+ "cpld write addr val\n"
+);
+
+void reset_cpu(ulong addr)
+{
+ cpld_init();
+ cpld_write(CPLD_ADDR_RESET, 1);
+}
--- /dev/null
+/*
+ * board/renesas/ulcb/ulcb.c
+ * This file is ULCB board support.
+ *
+ * Copyright (C) 2017 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <netdev.h>
+#include <dm.h>
+#include <dm/platform_data/serial_sh.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+#include <asm/arch/sh_sdhi.h>
+#include <i2c.h>
+#include <mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CPGWPCR 0xE6150904
+#define CPGWPR 0xE615090C
+
+#define CLK2MHZ(clk) (clk / 1000 / 1000)
+void s_init(void)
+{
+ struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
+ struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
+
+ /* Watchdog init */
+ writel(0xA5A5A500, &rwdt->rwtcsra);
+ writel(0xA5A5A500, &swdt->swtcsra);
+
+ writel(0xA5A50000, CPGWPCR);
+ writel(0xFFFFFFFF, CPGWPR);
+}
+
+#define GSX_MSTP112 BIT(12) /* 3DG */
+#define TMU0_MSTP125 BIT(25) /* secure */
+#define TMU1_MSTP124 BIT(24) /* non-secure */
+#define SCIF2_MSTP310 BIT(10) /* SCIF2 */
+#define ETHERAVB_MSTP812 BIT(12)
+#define DVFS_MSTP926 BIT(26)
+#define SD0_MSTP314 BIT(14)
+#define SD1_MSTP313 BIT(13)
+#define SD2_MSTP312 BIT(12) /* either MMC0 */
+
+#define SD0CKCR 0xE6150074
+#define SD1CKCR 0xE6150078
+#define SD2CKCR 0xE6150268
+#define SD3CKCR 0xE615026C
+
+int board_early_init_f(void)
+{
+ /* TMU0,1 */ /* which use ? */
+ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125 | TMU1_MSTP124);
+ /* SCIF2 */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SCIF2_MSTP310);
+ /* EHTERAVB */
+ mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHERAVB_MSTP812);
+ /* eMMC */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SD1_MSTP313 | SD2_MSTP312);
+ /* SDHI0 */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SD0_MSTP314);
+
+ writel(0, SD0CKCR);
+ writel(0, SD1CKCR);
+ writel(0, SD2CKCR);
+ writel(0, SD3CKCR);
+
+#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH)
+ /* DVFS for reset */
+ mstp_clrbits_le32(MSTPSR9, SMSTPCR9, DVFS_MSTP926);
+#endif
+ return 0;
+}
+
+/* SYSC */
+/* R/- 32 Power status register 2(3DG) */
+#define SYSC_PWRSR2 0xE6180100
+/* -/W 32 Power resume control register 2 (3DG) */
+#define SYSC_PWRONCR2 0xE618010C
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000;
+
+ /* Init PFC controller */
+#if defined(CONFIG_R8A7795)
+ r8a7795_pinmux_init();
+#elif defined(CONFIG_R8A7796)
+ r8a7796_pinmux_init();
+#endif
+
+ /* USB1 pull-up */
+ setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
+
+#ifdef CONFIG_RAVB
+ /* EtherAVB Enable */
+ /* GPSR2 */
+ gpio_request(GPIO_GFN_AVB_AVTP_CAPTURE_A, NULL);
+ gpio_request(GPIO_GFN_AVB_AVTP_MATCH_A, NULL);
+ gpio_request(GPIO_GFN_AVB_LINK, NULL);
+ gpio_request(GPIO_GFN_AVB_PHY_INT, NULL);
+ gpio_request(GPIO_GFN_AVB_MAGIC, NULL);
+ gpio_request(GPIO_GFN_AVB_MDC, NULL);
+
+ /* IPSR0 */
+ gpio_request(GPIO_IFN_AVB_MDC, NULL);
+ gpio_request(GPIO_IFN_AVB_MAGIC, NULL);
+ gpio_request(GPIO_IFN_AVB_PHY_INT, NULL);
+ gpio_request(GPIO_IFN_AVB_LINK, NULL);
+ gpio_request(GPIO_IFN_AVB_AVTP_MATCH_A, NULL);
+ gpio_request(GPIO_IFN_AVB_AVTP_CAPTURE_A, NULL);
+ /* IPSR1 */
+ gpio_request(GPIO_FN_AVB_AVTP_PPS, NULL);
+ /* IPSR2 */
+ gpio_request(GPIO_FN_AVB_AVTP_MATCH_B, NULL);
+ /* IPSR3 */
+ gpio_request(GPIO_FN_AVB_AVTP_CAPTURE_B, NULL);
+
+ /* AVB_PHY_RST */
+ gpio_request(GPIO_GP_2_10, NULL);
+ gpio_direction_output(GPIO_GP_2_10, 0);
+ mdelay(20);
+ gpio_set_value(GPIO_GP_2_10, 1);
+ udelay(1);
+#endif
+
+ return 0;
+}
+
+static struct eth_pdata salvator_x_ravb_platdata = {
+ .iobase = 0xE6800000,
+ .phy_interface = 0,
+ .max_speed = 1000,
+};
+
+U_BOOT_DEVICE(salvator_x_ravb) = {
+ .name = "ravb",
+ .platdata = &salvator_x_ravb_platdata,
+};
+
+#ifdef CONFIG_SH_SDHI
+int board_mmc_init(bd_t *bis)
+{
+ int ret = -ENODEV;
+
+ /* SDHI0 */
+ gpio_request(GPIO_GFN_SD0_DAT0, NULL);
+ gpio_request(GPIO_GFN_SD0_DAT1, NULL);
+ gpio_request(GPIO_GFN_SD0_DAT2, NULL);
+ gpio_request(GPIO_GFN_SD0_DAT3, NULL);
+ gpio_request(GPIO_GFN_SD0_CLK, NULL);
+ gpio_request(GPIO_GFN_SD0_CMD, NULL);
+ gpio_request(GPIO_GFN_SD0_CD, NULL);
+ gpio_request(GPIO_GFN_SD0_WP, NULL);
+
+ gpio_request(GPIO_GP_5_2, NULL);
+ gpio_request(GPIO_GP_5_1, NULL);
+ gpio_direction_output(GPIO_GP_5_2, 1); /* power on */
+ gpio_direction_output(GPIO_GP_5_1, 1); /* 1: 3.3V, 0: 1.8V */
+
+ ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0,
+ SH_SDHI_QUIRK_64BIT_BUF);
+ if (ret)
+ return ret;
+
+ /* SDHI1/SDHI2 eMMC */
+ gpio_request(GPIO_GFN_SD1_DAT0, NULL);
+ gpio_request(GPIO_GFN_SD1_DAT1, NULL);
+ gpio_request(GPIO_GFN_SD1_DAT2, NULL);
+ gpio_request(GPIO_GFN_SD1_DAT3, NULL);
+ gpio_request(GPIO_GFN_SD2_DAT0, NULL);
+ gpio_request(GPIO_GFN_SD2_DAT1, NULL);
+ gpio_request(GPIO_GFN_SD2_DAT2, NULL);
+ gpio_request(GPIO_GFN_SD2_DAT3, NULL);
+ gpio_request(GPIO_GFN_SD2_CLK, NULL);
+#if defined(CONFIG_R8A7795)
+ gpio_request(GPIO_GFN_SD2_CMD, NULL);
+#elif defined(CONFIG_R8A7796)
+ gpio_request(GPIO_FN_SD2_CMD, NULL);
+#else
+#error Only R8A7795 and R87796 is supported
+#endif
+ gpio_request(GPIO_GP_5_3, NULL);
+ gpio_request(GPIO_GP_5_9, NULL);
+ gpio_direction_output(GPIO_GP_5_3, 0); /* 1: 3.3V, 0: 1.8V */
+ gpio_direction_output(GPIO_GP_5_9, 0); /* 1: 3.3V, 0: 1.8V */
+
+ ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 1,
+ SH_SDHI_QUIRK_64BIT_BUF);
+
+ return ret;
+}
+#endif
+
+int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
+#if (CONFIG_NR_DRAM_BANKS >= 2)
+ gd->ram_size += PHYS_SDRAM_2_SIZE;
+#endif
+#if (CONFIG_NR_DRAM_BANKS >= 3)
+ gd->ram_size += PHYS_SDRAM_3_SIZE;
+#endif
+#if (CONFIG_NR_DRAM_BANKS >= 4)
+ gd->ram_size += PHYS_SDRAM_4_SIZE;
+#endif
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+#if (CONFIG_NR_DRAM_BANKS >= 2)
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+#endif
+#if (CONFIG_NR_DRAM_BANKS >= 3)
+ gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+ gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+#endif
+#if (CONFIG_NR_DRAM_BANKS >= 4)
+ gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
+ gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
+#endif
+ return 0;
+}
+
+const struct rmobile_sysinfo sysinfo = {
+ CONFIG_RCAR_BOARD_STRING
+};
+
+static const struct sh_serial_platdata serial_platdata = {
+ .base = SCIF2_BASE,
+ .type = PORT_SCIF,
+ .clk = CONFIG_SH_SCIF_CLK_FREQ,
+ .clk_mode = INT_CLK,
+};
+
+U_BOOT_DEVICE(salvator_x_scif2) = {
+ .name = "serial_sh",
+ .platdata = &serial_platdata,
+};
#
obj-y += board.o
obj-$(CONFIG_SUNXI_GMAC) += gmac.o
+ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_SUNXI_AHCI) += ahci.o
+endif
obj-$(CONFIG_MACH_SUN4I) += dram_sun4i_auto.o
obj-$(CONFIG_MACH_SUN5I) += dram_sun5i_auto.o
obj-$(CONFIG_MACH_SUN7I) += dram_sun5i_auto.o
#include <common.h>
#include <ahci.h>
+#include <dm.h>
#include <scsi.h>
#include <errno.h>
#include <asm/io.h>
/* This magic PHY initialisation was taken from the Allwinner releases
* and Linux driver, but is completely undocumented.
*/
-static int sunxi_ahci_phy_init(u32 base)
+static int sunxi_ahci_phy_init(u8 *reg_base)
{
- u8 *reg_base = (u8 *)base;
u32 reg_val;
int timeout;
return 0;
}
+#ifndef CONFIG_DM_SCSI
void scsi_init(void)
{
- if (sunxi_ahci_phy_init(SUNXI_SATA_BASE) < 0)
+ if (sunxi_ahci_phy_init((u8 *)SUNXI_SATA_BASE) < 0)
return;
ahci_init((void __iomem *)SUNXI_SATA_BASE);
}
+#else
+static int sunxi_sata_probe(struct udevice *dev)
+{
+ ulong base;
+ u8 *reg;
+ int ret;
+
+ base = dev_read_addr(dev);
+ if (base == FDT_ADDR_T_NONE) {
+ debug("%s: Failed to find address (err=%d\n)", __func__, ret);
+ return -EINVAL;
+ }
+ reg = (u8 *)base;
+ ret = sunxi_ahci_phy_init(reg);
+ if (ret) {
+ debug("%s: Failed to init phy (err=%d\n)", __func__, ret);
+ return ret;
+ }
+ ret = ahci_probe_scsi(dev, base);
+ if (ret) {
+ debug("%s: Failed to probe (err=%d\n)", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sunxi_sata_bind(struct udevice *dev)
+{
+ struct udevice *scsi_dev;
+ int ret;
+
+ ret = ahci_bind_scsi(dev, &scsi_dev);
+ if (ret) {
+ debug("%s: Failed to bind (err=%d\n)", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id sunxi_ahci_ids[] = {
+ { .compatible = "allwinner,sun4i-a10-ahci" },
+ { }
+};
+
+U_BOOT_DRIVER(ahci_sunxi_drv) = {
+ .name = "ahci_sunxi",
+ .id = UCLASS_AHCI,
+ .of_match = sunxi_ahci_ids,
+ .bind = sunxi_sata_bind,
+ .probe = sunxi_sata_probe,
+};
+#endif
config ARCH_EARLY_INIT_R
bool "Call arch-specific init soon after relocation"
- default y if X86
help
With this option U-Boot will call arch_early_init_r() soon after
relocation. Driver model is running by this point, and the cache
config BOARD_EARLY_INIT_F
bool "Call board-specific init before relocation"
- default y if X86
help
Some boards need to perform initialisation as soon as possible
after boot. With this option, U-Boot calls board_early_init_f()
u64 fdt_get_base_address(const void *fdt, int node)
{
int size;
- u32 naddr;
const fdt32_t *prop;
- naddr = fdt_address_cells(fdt, node);
+ prop = fdt_getprop(fdt, node, "reg", &size);
- prop = fdt_getprop(fdt, node, "ranges", &size);
-
- return prop ? fdt_translate_address(fdt, node, prop + naddr) : 0;
+ return prop ? fdt_translate_address(fdt, node, prop) : 0;
}
/*
static int spl_mmc_find_device(struct mmc **mmcp, u32 boot_device)
{
-#ifdef CONFIG_DM_MMC
+#if CONFIG_IS_ENABLED(DM_MMC)
struct udevice *dev;
#endif
int err, mmc_dev;
return err;
}
-#ifdef CONFIG_DM_MMC
+#if CONFIG_IS_ENABLED(DM_MMC)
err = uclass_get_device(UCLASS_MMC, mmc_dev, &dev);
if (!err)
*mmcp = mmc_get_mmc_dev(dev);
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_SCSI=y
+# CONFIG_SPL_BLK is not set
+CONFIG_DM_MMC=y
+# CONFIG_SPL_DM_MMC is not set
+# CONFIG_SPL_DM_MMC_OPS is not set
CONFIG_ETH_DESIGNWARE=y
CONFIG_SUN7I_GMAC=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_BAUDRATE=38400
+CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_DOS_PARTITION=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_BAUDRATE=38400
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
# CONFIG_MMC is not set
+CONFIG_SCIF_CONSOLE=y
CONFIG_OF_LIBFDT=y
CONFIG_DEFAULT_DEVICE_TREE="bayleybay"
CONFIG_TARGET_BAYLEYBAY=y
CONFIG_INTERNAL_UART=y
-CONFIG_HAVE_INTEL_ME=y
-CONFIG_ENABLE_MRC_CACHE=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_VGA_BIOS_ADDR=0xfffa0000
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_ARCH_EARLY_INIT_R is not set
-CONFIG_ARCH_MISC_INIT=y
-# CONFIG_BOARD_EARLY_INIT_F is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
-CONFIG_SCSI=y
CONFIG_CPU=y
-CONFIG_MMC=y
-CONFIG_MMC_PCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_SDMA=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
CONFIG_E1000=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_BAUDRATE=38400
+CONFIG_SCIF_CONSOLE=y
CONFIG_DEFAULT_DEVICE_TREE="chromebook_link"
CONFIG_TARGET_CHROMEBOOK_LINK64=y
CONFIG_DEBUG_UART=y
-CONFIG_ENABLE_MRC_CACHE=y
CONFIG_HAVE_MRC=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_CPU_SUPPORT=y
+CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
CONFIG_SPL_PCI_SUPPORT=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_SPL_DM=y
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_BLK=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_INTEL=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_LPC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
CONFIG_TPM_TIS_LPC=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_VIDEO_IVYBRIDGE_IGD=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_TPM=y
CONFIG_DEFAULT_DEVICE_TREE="chromebook_link"
CONFIG_TARGET_CHROMEBOOK_LINK=y
CONFIG_DEBUG_UART=y
-CONFIG_ENABLE_MRC_CACHE=y
CONFIG_HAVE_MRC=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_BLK=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_INTEL=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_LPC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
CONFIG_TPM_TIS_LPC=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_VIDEO_IVYBRIDGE_IGD=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_TPM=y
CONFIG_DEFAULT_DEVICE_TREE="chromebook_samus"
CONFIG_TARGET_CHROMEBOOK_SAMUS=y
CONFIG_DEBUG_UART=y
-CONFIG_ENABLE_MRC_CACHE=y
CONFIG_HAVE_MRC=y
CONFIG_HAVE_REFCODE=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
-CONFIG_SCSI=y
CONFIG_CPU=y
-CONFIG_INTEL_BROADWELL_GPIO=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_LPC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
CONFIG_TPM_TIS_LPC=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
-CONFIG_VIDEO_BROADWELL_IGD=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_TPM=y
CONFIG_VENDOR_GOOGLE=y
CONFIG_DEFAULT_DEVICE_TREE="chromebox_panther"
CONFIG_TARGET_CHROMEBOX_PANTHER=y
-CONFIG_ENABLE_MRC_CACHE=y
CONFIG_HAVE_MRC=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_BLK=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_LPC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
CONFIG_RTL8169=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
CONFIG_TPM_TIS_LPC=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_TPM=y
CONFIG_DEFAULT_DEVICE_TREE="conga-qeval20-qa3-e3845"
CONFIG_INTERNAL_UART=y
CONFIG_DEBUG_UART=y
-CONFIG_HAVE_INTEL_ME=y
-CONFIG_ENABLE_MRC_CACHE=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_INTEL=y
CONFIG_WINBOND_W83627=y
-CONFIG_MMC=y
-CONFIG_MMC_PCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_SDMA=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
CONFIG_E1000=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
-CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_TARGET_CONGA_QEVAL20_QA3_E3845=y
CONFIG_DEFAULT_DEVICE_TREE="conga-qeval20-qa3-e3845"
CONFIG_DEBUG_UART=y
-CONFIG_HAVE_INTEL_ME=y
-CONFIG_ENABLE_MRC_CACHE=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_INTEL=y
CONFIG_WINBOND_W83627=y
-CONFIG_MMC=y
-CONFIG_MMC_PCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_SDMA=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
CONFIG_E1000=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
-CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
-CONFIG_ENV_IS_NOWHERE=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_BOARD_EARLY_INIT_F is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_IDE=y
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
-CONFIG_E1000=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_TIMER=y
CONFIG_TPM_TIS_LPC=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_COREBOOT=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_TPM=y
CONFIG_VENDOR_INTEL=y
CONFIG_DEFAULT_DEVICE_TREE="cougarcanyon2"
CONFIG_TARGET_COUGARCANYON2=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_CONSOLE_MUX=y
+# CONFIG_ENABLE_MRC_CACHE is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_ARCH_EARLY_INIT_R is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
-CONFIG_SCSI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_USE_PRIVATE_LIBGCC=y
+# CONFIG_VIDEO_VESA is not set
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_GENERATE_MP_TABLE=y
CONFIG_FIT=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
-CONFIG_SCSI=y
CONFIG_CPU=y
-CONFIG_MMC=y
-CONFIG_MMC_PCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_SDMA=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SST=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
CONFIG_E1000=y
-CONFIG_PCH_GBE=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_DEFAULT_DEVICE_TREE="dfi-bt700-q7x-151"
CONFIG_TARGET_DFI_BT700=y
CONFIG_DEBUG_UART=y
-CONFIG_HAVE_INTEL_ME=y
-CONFIG_ENABLE_MRC_CACHE=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_ARCH_EARLY_INIT_R is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_NUVOTON_NCT6102D=y
-CONFIG_MMC=y
-CONFIG_MMC_PCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_SDMA=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
CONFIG_E1000=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
-CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_DEFAULT_DEVICE_TREE="edison"
CONFIG_TARGET_EDISON=y
CONFIG_SMP=y
-# CONFIG_ARCH_EARLY_INIT_R is not set
-# CONFIG_BOARD_EARLY_INIT_F is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_CPU=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
-CONFIG_MMC=y
-CONFIG_DM_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_SDMA=y
-CONFIG_MMC_SDHCI_TANGIER=y
-CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
-CONFIG_DM_RTC=y
-CONFIG_INTEL_MID_SERIAL=y
-CONFIG_TIMER=y
-CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="Intel"
CONFIG_G_DNL_VENDOR_NUM=0x8087
CONFIG_G_DNL_PRODUCT_NUM=0x0a99
-CONFIG_TANGIER_WATCHDOG=y
CONFIG_FAT_WRITE=y
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_SHA1=y
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_ENV_IS_NOWHERE=y
-CONFIG_CONSOLE_MUX=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_ARCH_EARLY_INIT_R is not set
-# CONFIG_BOARD_EARLY_INIT_F is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BOOTM is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_NET is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
-CONFIG_DM_PCI=y
+# CONFIG_DM_ETH is not set
CONFIG_DEBUG_EFI_CONSOLE=y
CONFIG_DEBUG_UART_BASE=0
CONFIG_DEBUG_UART_CLOCK=0
CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_KEYBOARD=y
CONFIG_EFI=y
# CONFIG_EFI_LOADER is not set
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_VENDOR_INTEL=y
CONFIG_DEFAULT_DEVICE_TREE="galileo"
CONFIG_TARGET_GALILEO=y
-CONFIG_ENABLE_MRC_CACHE=y
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_GENERATE_MP_TABLE=y
CONFIG_GENERATE_ACPI_TABLE=y
CONFIG_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_CONSOLE_MUX=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
-CONFIG_MMC=y
-CONFIG_MMC_PCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_SDMA=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_BAUDRATE=38400
+CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_BAUDRATE=38400
+CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_CMD_FAT=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
# CONFIG_FAT_WRITE is not set
CONFIG_OF_LIBFDT=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_BAUDRATE=38400
+CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_RSA=y
CONFIG_SPL_RSA=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_DISTRO_DEFAULTS=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_RSA=y
CONFIG_SPL_RSA=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_USB_STORAGE=y
CONFIG_RSA=y
CONFIG_SPL_RSA=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_CAAM=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_CAAM=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_CAAM=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_CAAM=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_SPI_FLASH=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_RSA=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_QSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_DM_USB=y
CONFIG_RSA=y
CONFIG_SPL_RSA=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_QSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_TARGET_MINNOWMAX=y
CONFIG_INTERNAL_UART=y
CONFIG_DEBUG_UART=y
-CONFIG_HAVE_INTEL_ME=y
-CONFIG_ENABLE_MRC_CACHE=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_ARCH_MISC_INIT=y
-# CONFIG_BOARD_EARLY_INIT_F is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
-CONFIG_SCSI=y
CONFIG_CPU=y
-CONFIG_MMC=y
-CONFIG_MMC_PCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_SDMA=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
CONFIG_RTL8169=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
-CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_CMD_CACHE=y
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_DOS_PARTITION=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_USE_PRIVATE_LIBGCC=y
+CONFIG_SCIF_CONSOLE=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_JFFS2=y
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_BAUDRATE=38400
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_BAUDRATE=38400
+CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_MAX_CPUS=2
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_X86_RUN_64BIT=y
CONFIG_DEFAULT_DEVICE_TREE="qemu-x86_i440fx"
CONFIG_SPL_LOAD_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
-CONFIG_ENV_IS_NOWHERE=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_BOARD_EARLY_INIT_F is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_CPU_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_SPL_DM=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
CONFIG_CPU=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
-CONFIG_E1000=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
-CONFIG_SYS_NS16550=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_111=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
-CONFIG_ENV_IS_NOWHERE=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_BOARD_EARLY_INIT_F is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
-CONFIG_E1000=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_111=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
-CONFIG_ENV_IS_NOWHERE=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_BOARD_EARLY_INIT_F is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
-CONFIG_E1000=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_111=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
-CONFIG_ENV_IS_NOWHERE=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_BOARD_EARLY_INIT_F is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
-CONFIG_E1000=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_111=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_STUB_64BIT=y
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_NETDEVICES=y
CONFIG_RTL8139=y
CONFIG_PCI=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_DOS_PARTITION=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_PCI=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_RCAR_GEN3=y
CONFIG_TARGET_SALVATOR_X=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_DEFAULT_DEVICE_TREE="r8a7795-salvator-x"
+CONFIG_SMBIOS_PRODUCT_NAME=""
CONFIG_DEFAULT_FDT_FILE="r8a7795-salvator-x.dtb"
CONFIG_VERSION_VARIABLE=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
CONFIG_CMD_FAT=y
+CONFIG_CLK=y
+CONFIG_CLK_RENESAS=y
CONFIG_SH_SDHI=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
+CONFIG_SMBIOS_MANUFACTURER=""
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_RMOBILE=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_RCAR_GEN3=y
+CONFIG_TARGET_ULCB=y
+CONFIG_DEFAULT_DEVICE_TREE="r8a7795-h3ulcb"
+CONFIG_SMBIOS_PRODUCT_NAME=""
+CONFIG_DEFAULT_FDT_FILE="r8a7795-h3ulcb.dtb"
+CONFIG_VERSION_VARIABLE=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_CLK=y
+CONFIG_CLK_RENESAS=y
+CONFIG_SH_SDHI=y
+CONFIG_DM_ETH=y
+CONFIG_RENESAS_RAVB=y
+CONFIG_SCIF_CONSOLE=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_SMBIOS_MANUFACTURER=""
CONFIG_R8A7796=y
CONFIG_TARGET_SALVATOR_X=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_DEFAULT_DEVICE_TREE="r8a7796-salvator-x"
+CONFIG_SMBIOS_PRODUCT_NAME=""
CONFIG_DEFAULT_FDT_FILE="r8a7796-salvator-x.dtb"
CONFIG_VERSION_VARIABLE=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
CONFIG_CMD_FAT=y
+CONFIG_CLK=y
+CONFIG_CLK_RENESAS=y
CONFIG_SH_SDHI=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
+CONFIG_SMBIOS_MANUFACTURER=""
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_RMOBILE=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_RCAR_GEN3=y
+CONFIG_R8A7796=y
+CONFIG_TARGET_ULCB=y
+CONFIG_DEFAULT_DEVICE_TREE="r8a7796-m3ulcb"
+CONFIG_SMBIOS_PRODUCT_NAME=""
+CONFIG_DEFAULT_FDT_FILE="r8a7796-m3ulcb.dtb"
+CONFIG_VERSION_VARIABLE=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_CLK=y
+CONFIG_CLK_RENESAS=y
+CONFIG_SH_SDHI=y
+CONFIG_DM_ETH=y
+CONFIG_RENESAS_RAVB=y
+CONFIG_SCIF_CONSOLE=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_SMBIOS_MANUFACTURER=""
CONFIG_CMD_CACHE=y
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_BOOTDELAY=3
# CONFIG_CMD_SETEXPR is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_BOOTDELAY=3
# CONFIG_CMD_SETEXPR is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_MMC=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_JFFS2=y
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_MAC_PARTITION=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_PCI=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_MAC_PARTITION=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_PCI=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_SCIF_CONSOLE=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_BAUDRATE=38400
+CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_TARGET_SOM_DB5800_SOM_6867=y
CONFIG_DEFAULT_DEVICE_TREE="baytrail_som-db5800-som-6867"
CONFIG_DEBUG_UART=y
-CONFIG_HAVE_INTEL_ME=y
-CONFIG_ENABLE_MRC_CACHE=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
-CONFIG_SCSI=y
CONFIG_CPU=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
CONFIG_E1000=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
-CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_BAUDRATE=38400
+CONFIG_SCIF_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_VENDOR_DFI=y
CONFIG_DEFAULT_DEVICE_TREE="theadorable-x86-dfi-bt700"
CONFIG_TARGET_DFI_BT700=y
-CONFIG_HAVE_INTEL_ME=y
-CONFIG_ENABLE_MRC_CACHE=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_VGA_BIOS_ADDR=0xfffa0000
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_ARCH_EARLY_INIT_R is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_OF_CONTROL=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_NUVOTON_NCT6102D=y
-CONFIG_MMC=y
-CONFIG_MMC_PCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_SDMA=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
CONFIG_E1000=y
-CONFIG_DM_PCI=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_ICH_SPI=y
-CONFIG_TIMER=y
-CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5
-CONFIG_USE_PRIVATE_LIBGCC=y
See also CMD_SATA which provides command-line support.
-config SCSI
- bool "Support SCSI controllers"
- help
- This enables support for SCSI (Small Computer System Interface),
- a parallel interface widely used with storage peripherals such as
- hard drives and optical drives. The SCSI standards define physical
- interfaces as well as protocols for controlling devices and
- tranferring data.
-
-config DM_SCSI
- bool "Support SCSI controllers with driver model"
- depends on BLK
- help
- This option enables the SCSI (Small Computer System Interface) uclass
- which supports SCSI and SATA HDDs. For every device configuration
- (IDs/LUNs) a block device is created with RAW read/write and
- filesystem support.
-
menu "SATA/SCSI device support"
+config AHCI_PCI
+ bool "Support for PCI-based AHCI controller"
+ depends on DM_SCSI
+ help
+ Enables support for the PCI-based AHCI controller.
+
config SATA_CEVA
bool "Ceva Sata controller"
depends on AHCI
obj-$(CONFIG_DWC_AHCI) += dwc_ahci.o
obj-$(CONFIG_AHCI) += ahci-uclass.o
+obj-$(CONFIG_AHCI_PCI) += ahci-pci.o
obj-$(CONFIG_SCSI_AHCI) += ahci.o
obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
obj-$(CONFIG_FSL_SATA) += fsl_sata.o
--- /dev/null
+/*
+ * Copyright (C) 2017, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <ahci.h>
+#include <dm.h>
+#include <pci.h>
+
+static int ahci_pci_bind(struct udevice *dev)
+{
+ struct udevice *scsi_dev;
+
+ return ahci_bind_scsi(dev, &scsi_dev);
+}
+
+static int ahci_pci_probe(struct udevice *dev)
+{
+ return ahci_probe_scsi_pci(dev);
+}
+
+static const struct udevice_id ahci_pci_ids[] = {
+ { .compatible = "ahci-pci" },
+ { }
+};
+
+U_BOOT_DRIVER(ahci_pci) = {
+ .name = "ahci_pci",
+ .id = UCLASS_AHCI,
+ .of_match = ahci_pci_ids,
+ .bind = ahci_pci_bind,
+ .probe = ahci_pci_probe,
+};
+
+static struct pci_device_id ahci_pci_supported[] = {
+ { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, ~0) },
+ {},
+};
+
+U_BOOT_PCI_DEVICE(ahci_pci, ahci_pci_supported);
*/
#include <common.h>
+#include <ahci.h>
#include <dm.h>
UCLASS_DRIVER(ahci) = {
.id = UCLASS_AHCI,
.name = "ahci",
+ .per_device_auto_alloc_size = sizeof(struct ahci_uc_priv),
};
cap2 & (1 << 0) ? "boh " : "");
}
-#ifndef CONFIG_SCSI_AHCI_PLAT
+#if defined(CONFIG_DM_SCSI) || !defined(CONFIG_SCSI_AHCI_PLAT)
# if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
static int ahci_init_one(struct ahci_uc_priv *uc_priv, struct udevice *dev)
# else
{
struct ahci_uc_priv *uc_priv;
#ifdef CONFIG_DM_SCSI
- uc_priv = dev_get_uclass_priv(dev);
+ uc_priv = dev_get_uclass_priv(dev->parent);
#else
uc_priv = probe_ent;
#endif
return 0;
}
-int ahci_probe_scsi(struct udevice *ahci_dev)
+int ahci_probe_scsi(struct udevice *ahci_dev, ulong base)
{
-#ifdef CONFIG_SCSI_AHCI_PLAT
- return -ENOSYS; /* TODO(sjg@chromium.org): Support non-PCI AHCI */
-#else
struct ahci_uc_priv *uc_priv;
struct scsi_platdata *uc_plat;
struct udevice *dev;
if (!dev)
return -ENODEV;
uc_plat = dev_get_uclass_platdata(dev);
- uc_plat->base = (ulong)dm_pci_map_bar(ahci_dev, PCI_BASE_ADDRESS_5,
- PCI_REGION_MEM);
+ uc_plat->base = base;
uc_plat->max_lun = 1;
uc_plat->max_id = 2;
- uc_priv = dev_get_uclass_priv(dev);
+
+ uc_priv = dev_get_uclass_priv(ahci_dev);
ret = ahci_init_one(uc_priv, dev);
if (ret)
return ret;
ret = ahci_start_ports(uc_priv);
if (ret)
return ret;
-#endif
return 0;
}
+#ifdef CONFIG_DM_PCI
+int ahci_probe_scsi_pci(struct udevice *ahci_dev)
+{
+ ulong base;
+
+ base = (ulong)dm_pci_map_bar(ahci_dev, PCI_BASE_ADDRESS_5,
+ PCI_REGION_MEM);
+
+ return ahci_probe_scsi(ahci_dev, base);
+}
+#endif
+
struct scsi_ops scsi_ops = {
.exec = ahci_scsi_exec,
.bus_reset = ahci_scsi_bus_reset,
be partitioned into several areas, called 'partitions' in U-Boot.
A filesystem can be placed in each partition.
+config SPL_BLK
+ bool "Support block devices in SPL"
+ depends on SPL_DM && BLK
+ default y
+ help
+ Enable support for block devices, such as SCSI, MMC and USB
+ flash sticks. These provide a block-level interface which permits
+ reading, writing and (in some cases) erasing blocks. Block
+ devices often have a partition table which allows the device to
+ be partitioned into several areas, called 'partitions' in U-Boot.
+ A filesystem can be placed in each partition.
+
config BLOCK_CACHE
bool "Use block device cache"
default n
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_BLK) += blk-uclass.o
+obj-$(CONFIG_$(SPL_)BLK) += blk-uclass.o
-ifndef CONFIG_BLK
+ifndef CONFIG_$(SPL_)BLK
obj-y += blk_legacy.o
endif
device = dev_desc->devnum;
dev_desc->type = DEV_TYPE_UNKNOWN; /* not yet valid */
+#ifndef CONFIG_BLK
dev_desc->block_read = atapi_read;
+#endif
memset(ccb, 0, sizeof(ccb));
memset(iobuf, 0, sizeof(iobuf));
source "drivers/clk/uniphier/Kconfig"
source "drivers/clk/exynos/Kconfig"
source "drivers/clk/at91/Kconfig"
+source "drivers/clk/renesas/Kconfig"
endmenu
obj-$(CONFIG_SANDBOX) += clk_sandbox.o
obj-$(CONFIG_SANDBOX) += clk_sandbox_test.o
obj-$(CONFIG_MACH_PIC32) += clk_pic32.o
+obj-$(CONFIG_CLK_RENESAS) += renesas/
obj-$(CONFIG_CLK_ZYNQ) += clk_zynq.o
obj-$(CONFIG_CLK_ZYNQMP) += clk_zynqmp.o
--- /dev/null
+config CLK_RENESAS
+ bool "Renesas clock drivers"
+ depends on CLK && ARCH_RMOBILE
+ help
+ Enable support for clock present on Renesas RCar SoCs.
+
+config CLK_RCAR_GEN3
+ bool "Renesas RCar Gen3 R8A7795/R8A7796 clock driver"
+ def_bool y if RCAR_GEN3
+ depends on CLK_RENESAS
+ help
+ Enable this to support the clocks on Renesas RCar Gen3
+ R8A7795 and R8A7796 SoC.
--- /dev/null
+obj-$(CONFIG_CLK_RCAR_GEN3) += clk-rcar-gen3.o
--- /dev/null
+/*
+ * Renesas RCar Gen3 R8A7795/R8A7796 CPG MSSR driver
+ *
+ * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on the following driver from Linux kernel:
+ * r8a7796 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2016 Glider bvba
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <wait_bit.h>
+#include <asm/io.h>
+
+#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+
+#define CPG_RST_MODEMR 0x0060
+
+#define CPG_PLL0CR 0x00d8
+#define CPG_PLL2CR 0x002c
+#define CPG_PLL4CR 0x01f4
+
+/*
+ * Module Standby and Software Reset register offets.
+ *
+ * If the registers exist, these are valid for SH-Mobile, R-Mobile,
+ * R-Car Gen2, R-Car Gen3, and RZ/G1.
+ * These are NOT valid for R-Car Gen1 and RZ/A1!
+ */
+
+/*
+ * Module Stop Status Register offsets
+ */
+
+static const u16 mstpsr[] = {
+ 0x030, 0x038, 0x040, 0x048, 0x04C, 0x03C, 0x1C0, 0x1C4,
+ 0x9A0, 0x9A4, 0x9A8, 0x9AC,
+};
+
+#define MSTPSR(i) mstpsr[i]
+
+
+/*
+ * System Module Stop Control Register offsets
+ */
+
+static const u16 smstpcr[] = {
+ 0x130, 0x134, 0x138, 0x13C, 0x140, 0x144, 0x148, 0x14C,
+ 0x990, 0x994, 0x998, 0x99C,
+};
+
+#define SMSTPCR(i) smstpcr[i]
+
+
+/* Realtime Module Stop Control Register offsets */
+#define RMSTPCR(i) (smstpcr[i] - 0x20)
+
+/* Modem Module Stop Control Register offsets (r8a73a4) */
+#define MMSTPCR(i) (smstpcr[i] + 0x20)
+
+/* Software Reset Clearing Register offsets */
+#define SRSTCLR(i) (0x940 + (i) * 4)
+
+struct gen3_clk_priv {
+ void __iomem *base;
+ struct clk clk_extal;
+ struct clk clk_extalr;
+ const struct rcar_gen3_cpg_pll_config *cpg_pll_config;
+ const struct mssr_mod_clk *mod_clk;
+ u32 mod_clk_size;
+};
+
+/*
+ * Definitions of CPG Core Clocks
+ *
+ * These include:
+ * - Clock outputs exported to DT
+ * - External input clocks
+ * - Internal CPG clocks
+ */
+struct cpg_core_clk {
+ /* Common */
+ const char *name;
+ unsigned int id;
+ unsigned int type;
+ /* Depending on type */
+ unsigned int parent; /* Core Clocks only */
+ unsigned int div;
+ unsigned int mult;
+ unsigned int offset;
+};
+
+enum clk_types {
+ /* Generic */
+ CLK_TYPE_IN, /* External Clock Input */
+ CLK_TYPE_FF, /* Fixed Factor Clock */
+
+ /* Custom definitions start here */
+ CLK_TYPE_CUSTOM,
+};
+
+#define DEF_TYPE(_name, _id, _type...) \
+ { .name = _name, .id = _id, .type = _type }
+#define DEF_BASE(_name, _id, _type, _parent...) \
+ DEF_TYPE(_name, _id, _type, .parent = _parent)
+
+#define DEF_INPUT(_name, _id) \
+ DEF_TYPE(_name, _id, CLK_TYPE_IN)
+#define DEF_FIXED(_name, _id, _parent, _div, _mult) \
+ DEF_BASE(_name, _id, CLK_TYPE_FF, _parent, .div = _div, .mult = _mult)
+#define DEF_GEN3_SD(_name, _id, _parent, _offset) \
+ DEF_BASE(_name, _id, CLK_TYPE_GEN3_SD, _parent, .offset = _offset)
+
+/*
+ * Definitions of Module Clocks
+ */
+struct mssr_mod_clk {
+ const char *name;
+ unsigned int id;
+ unsigned int parent; /* Add MOD_CLK_BASE for Module Clocks */
+};
+
+/* Convert from sparse base-100 to packed index space */
+#define MOD_CLK_PACK(x) ((x) - ((x) / 100) * (100 - 32))
+
+#define MOD_CLK_ID(x) (MOD_CLK_BASE + MOD_CLK_PACK(x))
+
+#define DEF_MOD(_name, _mod, _parent...) \
+ { .name = _name, .id = MOD_CLK_ID(_mod), .parent = _parent }
+
+enum rcar_gen3_clk_types {
+ CLK_TYPE_GEN3_MAIN = CLK_TYPE_CUSTOM,
+ CLK_TYPE_GEN3_PLL0,
+ CLK_TYPE_GEN3_PLL1,
+ CLK_TYPE_GEN3_PLL2,
+ CLK_TYPE_GEN3_PLL3,
+ CLK_TYPE_GEN3_PLL4,
+ CLK_TYPE_GEN3_SD,
+ CLK_TYPE_GEN3_R,
+};
+
+struct rcar_gen3_cpg_pll_config {
+ unsigned int extal_div;
+ unsigned int pll1_mult;
+ unsigned int pll3_mult;
+};
+
+enum clk_ids {
+ /* Core Clock Outputs exported to DT */
+ LAST_DT_CORE_CLK = R8A7796_CLK_OSC,
+
+ /* External Input Clocks */
+ CLK_EXTAL,
+ CLK_EXTALR,
+
+ /* Internal Core Clocks */
+ CLK_MAIN,
+ CLK_PLL0,
+ CLK_PLL1,
+ CLK_PLL2,
+ CLK_PLL3,
+ CLK_PLL4,
+ CLK_PLL1_DIV2,
+ CLK_PLL1_DIV4,
+ CLK_S0,
+ CLK_S1,
+ CLK_S2,
+ CLK_S3,
+ CLK_SDSRC,
+ CLK_SSPSRC,
+ CLK_RINT,
+
+ /* Module Clocks */
+ MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk gen3_core_clks[] = {
+ /* External Clock Inputs */
+ DEF_INPUT("extal", CLK_EXTAL),
+ DEF_INPUT("extalr", CLK_EXTALR),
+
+ /* Internal Core Clocks */
+ DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN3_MAIN, CLK_EXTAL),
+ DEF_BASE(".pll0", CLK_PLL0, CLK_TYPE_GEN3_PLL0, CLK_MAIN),
+ DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN3_PLL1, CLK_MAIN),
+ DEF_BASE(".pll2", CLK_PLL2, CLK_TYPE_GEN3_PLL2, CLK_MAIN),
+ DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN3_PLL3, CLK_MAIN),
+ DEF_BASE(".pll4", CLK_PLL4, CLK_TYPE_GEN3_PLL4, CLK_MAIN),
+
+ DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1),
+ DEF_FIXED(".pll1_div4", CLK_PLL1_DIV4, CLK_PLL1_DIV2, 2, 1),
+ DEF_FIXED(".s0", CLK_S0, CLK_PLL1_DIV2, 2, 1),
+ DEF_FIXED(".s1", CLK_S1, CLK_PLL1_DIV2, 3, 1),
+ DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1),
+ DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1),
+ DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1_DIV2, 2, 1),
+
+ /* Core Clock Outputs */
+ DEF_FIXED("ztr", R8A7796_CLK_ZTR, CLK_PLL1_DIV2, 6, 1),
+ DEF_FIXED("ztrd2", R8A7796_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
+ DEF_FIXED("zt", R8A7796_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
+ DEF_FIXED("zx", R8A7796_CLK_ZX, CLK_PLL1_DIV2, 2, 1),
+ DEF_FIXED("s0d1", R8A7796_CLK_S0D1, CLK_S0, 1, 1),
+ DEF_FIXED("s0d2", R8A7796_CLK_S0D2, CLK_S0, 2, 1),
+ DEF_FIXED("s0d3", R8A7796_CLK_S0D3, CLK_S0, 3, 1),
+ DEF_FIXED("s0d4", R8A7796_CLK_S0D4, CLK_S0, 4, 1),
+ DEF_FIXED("s0d6", R8A7796_CLK_S0D6, CLK_S0, 6, 1),
+ DEF_FIXED("s0d8", R8A7796_CLK_S0D8, CLK_S0, 8, 1),
+ DEF_FIXED("s0d12", R8A7796_CLK_S0D12, CLK_S0, 12, 1),
+ DEF_FIXED("s1d1", R8A7796_CLK_S1D1, CLK_S1, 1, 1),
+ DEF_FIXED("s1d2", R8A7796_CLK_S1D2, CLK_S1, 2, 1),
+ DEF_FIXED("s1d4", R8A7796_CLK_S1D4, CLK_S1, 4, 1),
+ DEF_FIXED("s2d1", R8A7796_CLK_S2D1, CLK_S2, 1, 1),
+ DEF_FIXED("s2d2", R8A7796_CLK_S2D2, CLK_S2, 2, 1),
+ DEF_FIXED("s2d4", R8A7796_CLK_S2D4, CLK_S2, 4, 1),
+ DEF_FIXED("s3d1", R8A7796_CLK_S3D1, CLK_S3, 1, 1),
+ DEF_FIXED("s3d2", R8A7796_CLK_S3D2, CLK_S3, 2, 1),
+ DEF_FIXED("s3d4", R8A7796_CLK_S3D4, CLK_S3, 4, 1),
+
+ DEF_GEN3_SD("sd0", R8A7796_CLK_SD0, CLK_SDSRC, 0x074),
+ DEF_GEN3_SD("sd1", R8A7796_CLK_SD1, CLK_SDSRC, 0x078),
+ DEF_GEN3_SD("sd2", R8A7796_CLK_SD2, CLK_SDSRC, 0x268),
+ DEF_GEN3_SD("sd3", R8A7796_CLK_SD3, CLK_SDSRC, 0x26c),
+
+ DEF_FIXED("cl", R8A7796_CLK_CL, CLK_PLL1_DIV2, 48, 1),
+ DEF_FIXED("cp", R8A7796_CLK_CP, CLK_EXTAL, 2, 1),
+
+ /* NOTE: HDMI, CSI, CAN etc. clock are missing */
+
+ DEF_BASE("r", R8A7796_CLK_R, CLK_TYPE_GEN3_R, CLK_RINT),
+};
+
+static const struct mssr_mod_clk r8a7795_mod_clks[] = {
+ DEF_MOD("fdp1-2", 117, R8A7795_CLK_S2D1), /* ES1.x */
+ DEF_MOD("fdp1-1", 118, R8A7795_CLK_S0D1),
+ DEF_MOD("fdp1-0", 119, R8A7795_CLK_S0D1),
+ DEF_MOD("scif5", 202, R8A7795_CLK_S3D4),
+ DEF_MOD("scif4", 203, R8A7795_CLK_S3D4),
+ DEF_MOD("scif3", 204, R8A7795_CLK_S3D4),
+ DEF_MOD("scif1", 206, R8A7795_CLK_S3D4),
+ DEF_MOD("scif0", 207, R8A7795_CLK_S3D4),
+ DEF_MOD("msiof3", 208, R8A7795_CLK_MSO),
+ DEF_MOD("msiof2", 209, R8A7795_CLK_MSO),
+ DEF_MOD("msiof1", 210, R8A7795_CLK_MSO),
+ DEF_MOD("msiof0", 211, R8A7795_CLK_MSO),
+ DEF_MOD("sys-dmac2", 217, R8A7795_CLK_S0D3),
+ DEF_MOD("sys-dmac1", 218, R8A7795_CLK_S0D3),
+ DEF_MOD("sys-dmac0", 219, R8A7795_CLK_S0D3),
+ DEF_MOD("cmt3", 300, R8A7795_CLK_R),
+ DEF_MOD("cmt2", 301, R8A7795_CLK_R),
+ DEF_MOD("cmt1", 302, R8A7795_CLK_R),
+ DEF_MOD("cmt0", 303, R8A7795_CLK_R),
+ DEF_MOD("scif2", 310, R8A7795_CLK_S3D4),
+ DEF_MOD("sdif3", 311, R8A7795_CLK_SD3),
+ DEF_MOD("sdif2", 312, R8A7795_CLK_SD2),
+ DEF_MOD("sdif1", 313, R8A7795_CLK_SD1),
+ DEF_MOD("sdif0", 314, R8A7795_CLK_SD0),
+ DEF_MOD("pcie1", 318, R8A7795_CLK_S3D1),
+ DEF_MOD("pcie0", 319, R8A7795_CLK_S3D1),
+ DEF_MOD("usb-dmac30", 326, R8A7795_CLK_S3D1),
+ DEF_MOD("usb3-if1", 327, R8A7795_CLK_S3D1), /* ES1.x */
+ DEF_MOD("usb3-if0", 328, R8A7795_CLK_S3D1),
+ DEF_MOD("usb-dmac31", 329, R8A7795_CLK_S3D1),
+ DEF_MOD("usb-dmac0", 330, R8A7795_CLK_S3D1),
+ DEF_MOD("usb-dmac1", 331, R8A7795_CLK_S3D1),
+ DEF_MOD("rwdt", 402, R8A7795_CLK_R),
+ DEF_MOD("intc-ex", 407, R8A7795_CLK_CP),
+ DEF_MOD("intc-ap", 408, R8A7795_CLK_S3D1),
+ DEF_MOD("audmac1", 501, R8A7795_CLK_S0D3),
+ DEF_MOD("audmac0", 502, R8A7795_CLK_S0D3),
+ DEF_MOD("drif7", 508, R8A7795_CLK_S3D2),
+ DEF_MOD("drif6", 509, R8A7795_CLK_S3D2),
+ DEF_MOD("drif5", 510, R8A7795_CLK_S3D2),
+ DEF_MOD("drif4", 511, R8A7795_CLK_S3D2),
+ DEF_MOD("drif3", 512, R8A7795_CLK_S3D2),
+ DEF_MOD("drif2", 513, R8A7795_CLK_S3D2),
+ DEF_MOD("drif1", 514, R8A7795_CLK_S3D2),
+ DEF_MOD("drif0", 515, R8A7795_CLK_S3D2),
+ DEF_MOD("hscif4", 516, R8A7795_CLK_S3D1),
+ DEF_MOD("hscif3", 517, R8A7795_CLK_S3D1),
+ DEF_MOD("hscif2", 518, R8A7795_CLK_S3D1),
+ DEF_MOD("hscif1", 519, R8A7795_CLK_S3D1),
+ DEF_MOD("hscif0", 520, R8A7795_CLK_S3D1),
+ DEF_MOD("thermal", 522, R8A7795_CLK_CP),
+ DEF_MOD("pwm", 523, R8A7795_CLK_S0D12),
+ DEF_MOD("fcpvd3", 600, R8A7795_CLK_S2D1), /* ES1.x */
+ DEF_MOD("fcpvd2", 601, R8A7795_CLK_S0D2),
+ DEF_MOD("fcpvd1", 602, R8A7795_CLK_S0D2),
+ DEF_MOD("fcpvd0", 603, R8A7795_CLK_S0D2),
+ DEF_MOD("fcpvb1", 606, R8A7795_CLK_S0D1),
+ DEF_MOD("fcpvb0", 607, R8A7795_CLK_S0D1),
+ DEF_MOD("fcpvi2", 609, R8A7795_CLK_S2D1), /* ES1.x */
+ DEF_MOD("fcpvi1", 610, R8A7795_CLK_S0D1),
+ DEF_MOD("fcpvi0", 611, R8A7795_CLK_S0D1),
+ DEF_MOD("fcpf2", 613, R8A7795_CLK_S2D1), /* ES1.x */
+ DEF_MOD("fcpf1", 614, R8A7795_CLK_S0D1),
+ DEF_MOD("fcpf0", 615, R8A7795_CLK_S0D1),
+ DEF_MOD("fcpci1", 616, R8A7795_CLK_S2D1), /* ES1.x */
+ DEF_MOD("fcpci0", 617, R8A7795_CLK_S2D1), /* ES1.x */
+ DEF_MOD("fcpcs", 619, R8A7795_CLK_S0D1),
+ DEF_MOD("vspd3", 620, R8A7795_CLK_S2D1), /* ES1.x */
+ DEF_MOD("vspd2", 621, R8A7795_CLK_S0D2),
+ DEF_MOD("vspd1", 622, R8A7795_CLK_S0D2),
+ DEF_MOD("vspd0", 623, R8A7795_CLK_S0D2),
+ DEF_MOD("vspbc", 624, R8A7795_CLK_S0D1),
+ DEF_MOD("vspbd", 626, R8A7795_CLK_S0D1),
+ DEF_MOD("vspi2", 629, R8A7795_CLK_S2D1), /* ES1.x */
+ DEF_MOD("vspi1", 630, R8A7795_CLK_S0D1),
+ DEF_MOD("vspi0", 631, R8A7795_CLK_S0D1),
+ DEF_MOD("ehci3", 700, R8A7795_CLK_S3D4),
+ DEF_MOD("ehci2", 701, R8A7795_CLK_S3D4),
+ DEF_MOD("ehci1", 702, R8A7795_CLK_S3D4),
+ DEF_MOD("ehci0", 703, R8A7795_CLK_S3D4),
+ DEF_MOD("hsusb", 704, R8A7795_CLK_S3D4),
+ DEF_MOD("hsusb3", 705, R8A7795_CLK_S3D4),
+ DEF_MOD("csi21", 713, R8A7795_CLK_CSI0), /* ES1.x */
+ DEF_MOD("csi20", 714, R8A7795_CLK_CSI0),
+ DEF_MOD("csi41", 715, R8A7795_CLK_CSI0),
+ DEF_MOD("csi40", 716, R8A7795_CLK_CSI0),
+ DEF_MOD("du3", 721, R8A7795_CLK_S2D1),
+ DEF_MOD("du2", 722, R8A7795_CLK_S2D1),
+ DEF_MOD("du1", 723, R8A7795_CLK_S2D1),
+ DEF_MOD("du0", 724, R8A7795_CLK_S2D1),
+ DEF_MOD("lvds", 727, R8A7795_CLK_S0D4),
+ DEF_MOD("hdmi1", 728, R8A7795_CLK_HDMI),
+ DEF_MOD("hdmi0", 729, R8A7795_CLK_HDMI),
+ DEF_MOD("vin7", 804, R8A7795_CLK_S0D2),
+ DEF_MOD("vin6", 805, R8A7795_CLK_S0D2),
+ DEF_MOD("vin5", 806, R8A7795_CLK_S0D2),
+ DEF_MOD("vin4", 807, R8A7795_CLK_S0D2),
+ DEF_MOD("vin3", 808, R8A7795_CLK_S0D2),
+ DEF_MOD("vin2", 809, R8A7795_CLK_S0D2),
+ DEF_MOD("vin1", 810, R8A7795_CLK_S0D2),
+ DEF_MOD("vin0", 811, R8A7795_CLK_S0D2),
+ DEF_MOD("etheravb", 812, R8A7795_CLK_S0D6),
+ DEF_MOD("sata0", 815, R8A7795_CLK_S3D2),
+ DEF_MOD("imr3", 820, R8A7795_CLK_S0D2),
+ DEF_MOD("imr2", 821, R8A7795_CLK_S0D2),
+ DEF_MOD("imr1", 822, R8A7795_CLK_S0D2),
+ DEF_MOD("imr0", 823, R8A7795_CLK_S0D2),
+ DEF_MOD("gpio7", 905, R8A7795_CLK_S3D4),
+ DEF_MOD("gpio6", 906, R8A7795_CLK_S3D4),
+ DEF_MOD("gpio5", 907, R8A7795_CLK_S3D4),
+ DEF_MOD("gpio4", 908, R8A7795_CLK_S3D4),
+ DEF_MOD("gpio3", 909, R8A7795_CLK_S3D4),
+ DEF_MOD("gpio2", 910, R8A7795_CLK_S3D4),
+ DEF_MOD("gpio1", 911, R8A7795_CLK_S3D4),
+ DEF_MOD("gpio0", 912, R8A7795_CLK_S3D4),
+ DEF_MOD("can-fd", 914, R8A7795_CLK_S3D2),
+ DEF_MOD("can-if1", 915, R8A7795_CLK_S3D4),
+ DEF_MOD("can-if0", 916, R8A7795_CLK_S3D4),
+ DEF_MOD("i2c6", 918, R8A7795_CLK_S0D6),
+ DEF_MOD("i2c5", 919, R8A7795_CLK_S0D6),
+ DEF_MOD("i2c-dvfs", 926, R8A7795_CLK_CP),
+ DEF_MOD("i2c4", 927, R8A7795_CLK_S0D6),
+ DEF_MOD("i2c3", 928, R8A7795_CLK_S0D6),
+ DEF_MOD("i2c2", 929, R8A7795_CLK_S3D2),
+ DEF_MOD("i2c1", 930, R8A7795_CLK_S3D2),
+ DEF_MOD("i2c0", 931, R8A7795_CLK_S3D2),
+ DEF_MOD("ssi-all", 1005, R8A7795_CLK_S3D4),
+ DEF_MOD("ssi9", 1006, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi8", 1007, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi7", 1008, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi6", 1009, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi5", 1010, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi4", 1011, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi3", 1012, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)),
+ DEF_MOD("scu-all", 1017, R8A7795_CLK_S3D4),
+ DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu1-mix1", 1020, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu0-mix0", 1021, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src9", 1022, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src8", 1023, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src7", 1024, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src6", 1025, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src5", 1026, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src4", 1027, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src3", 1028, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src2", 1029, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src1", 1030, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src0", 1031, MOD_CLK_ID(1017)),
+};
+
+static const struct mssr_mod_clk r8a7796_mod_clks[] = {
+ DEF_MOD("scif5", 202, R8A7796_CLK_S3D4),
+ DEF_MOD("scif4", 203, R8A7796_CLK_S3D4),
+ DEF_MOD("scif3", 204, R8A7796_CLK_S3D4),
+ DEF_MOD("scif1", 206, R8A7796_CLK_S3D4),
+ DEF_MOD("scif0", 207, R8A7796_CLK_S3D4),
+ DEF_MOD("msiof3", 208, R8A7796_CLK_MSO),
+ DEF_MOD("msiof2", 209, R8A7796_CLK_MSO),
+ DEF_MOD("msiof1", 210, R8A7796_CLK_MSO),
+ DEF_MOD("msiof0", 211, R8A7796_CLK_MSO),
+ DEF_MOD("sys-dmac2", 217, R8A7796_CLK_S0D3),
+ DEF_MOD("sys-dmac1", 218, R8A7796_CLK_S0D3),
+ DEF_MOD("sys-dmac0", 219, R8A7796_CLK_S0D3),
+ DEF_MOD("cmt3", 300, R8A7796_CLK_R),
+ DEF_MOD("cmt2", 301, R8A7796_CLK_R),
+ DEF_MOD("cmt1", 302, R8A7796_CLK_R),
+ DEF_MOD("cmt0", 303, R8A7796_CLK_R),
+ DEF_MOD("scif2", 310, R8A7796_CLK_S3D4),
+ DEF_MOD("sdif3", 311, R8A7796_CLK_SD3),
+ DEF_MOD("sdif2", 312, R8A7796_CLK_SD2),
+ DEF_MOD("sdif1", 313, R8A7796_CLK_SD1),
+ DEF_MOD("sdif0", 314, R8A7796_CLK_SD0),
+ DEF_MOD("pcie1", 318, R8A7796_CLK_S3D1),
+ DEF_MOD("pcie0", 319, R8A7796_CLK_S3D1),
+ DEF_MOD("usb-dmac0", 330, R8A7796_CLK_S3D1),
+ DEF_MOD("usb-dmac1", 331, R8A7796_CLK_S3D1),
+ DEF_MOD("rwdt", 402, R8A7796_CLK_R),
+ DEF_MOD("intc-ex", 407, R8A7796_CLK_CP),
+ DEF_MOD("intc-ap", 408, R8A7796_CLK_S3D1),
+ DEF_MOD("audmac1", 501, R8A7796_CLK_S0D3),
+ DEF_MOD("audmac0", 502, R8A7796_CLK_S0D3),
+ DEF_MOD("drif7", 508, R8A7796_CLK_S3D2),
+ DEF_MOD("drif6", 509, R8A7796_CLK_S3D2),
+ DEF_MOD("drif5", 510, R8A7796_CLK_S3D2),
+ DEF_MOD("drif4", 511, R8A7796_CLK_S3D2),
+ DEF_MOD("drif3", 512, R8A7796_CLK_S3D2),
+ DEF_MOD("drif2", 513, R8A7796_CLK_S3D2),
+ DEF_MOD("drif1", 514, R8A7796_CLK_S3D2),
+ DEF_MOD("drif0", 515, R8A7796_CLK_S3D2),
+ DEF_MOD("hscif4", 516, R8A7796_CLK_S3D1),
+ DEF_MOD("hscif3", 517, R8A7796_CLK_S3D1),
+ DEF_MOD("hscif2", 518, R8A7796_CLK_S3D1),
+ DEF_MOD("hscif1", 519, R8A7796_CLK_S3D1),
+ DEF_MOD("hscif0", 520, R8A7796_CLK_S3D1),
+ DEF_MOD("thermal", 522, R8A7796_CLK_CP),
+ DEF_MOD("pwm", 523, R8A7796_CLK_S0D12),
+ DEF_MOD("fcpvd2", 601, R8A7796_CLK_S0D2),
+ DEF_MOD("fcpvd1", 602, R8A7796_CLK_S0D2),
+ DEF_MOD("fcpvd0", 603, R8A7796_CLK_S0D2),
+ DEF_MOD("fcpvb0", 607, R8A7796_CLK_S0D1),
+ DEF_MOD("fcpvi0", 611, R8A7796_CLK_S0D1),
+ DEF_MOD("fcpf0", 615, R8A7796_CLK_S0D1),
+ DEF_MOD("fcpci0", 617, R8A7796_CLK_S0D2),
+ DEF_MOD("fcpcs", 619, R8A7796_CLK_S0D2),
+ DEF_MOD("vspd2", 621, R8A7796_CLK_S0D2),
+ DEF_MOD("vspd1", 622, R8A7796_CLK_S0D2),
+ DEF_MOD("vspd0", 623, R8A7796_CLK_S0D2),
+ DEF_MOD("vspb", 626, R8A7796_CLK_S0D1),
+ DEF_MOD("vspi0", 631, R8A7796_CLK_S0D1),
+ DEF_MOD("ehci1", 702, R8A7796_CLK_S3D4),
+ DEF_MOD("ehci0", 703, R8A7796_CLK_S3D4),
+ DEF_MOD("hsusb", 704, R8A7796_CLK_S3D4),
+ DEF_MOD("csi20", 714, R8A7796_CLK_CSI0),
+ DEF_MOD("csi40", 716, R8A7796_CLK_CSI0),
+ DEF_MOD("du2", 722, R8A7796_CLK_S2D1),
+ DEF_MOD("du1", 723, R8A7796_CLK_S2D1),
+ DEF_MOD("du0", 724, R8A7796_CLK_S2D1),
+ DEF_MOD("lvds", 727, R8A7796_CLK_S2D1),
+ DEF_MOD("hdmi0", 729, R8A7796_CLK_HDMI),
+ DEF_MOD("vin7", 804, R8A7796_CLK_S0D2),
+ DEF_MOD("vin6", 805, R8A7796_CLK_S0D2),
+ DEF_MOD("vin5", 806, R8A7796_CLK_S0D2),
+ DEF_MOD("vin4", 807, R8A7796_CLK_S0D2),
+ DEF_MOD("vin3", 808, R8A7796_CLK_S0D2),
+ DEF_MOD("vin2", 809, R8A7796_CLK_S0D2),
+ DEF_MOD("vin1", 810, R8A7796_CLK_S0D2),
+ DEF_MOD("vin0", 811, R8A7796_CLK_S0D2),
+ DEF_MOD("etheravb", 812, R8A7796_CLK_S0D6),
+ DEF_MOD("imr1", 822, R8A7796_CLK_S0D2),
+ DEF_MOD("imr0", 823, R8A7796_CLK_S0D2),
+ DEF_MOD("gpio7", 905, R8A7796_CLK_S3D4),
+ DEF_MOD("gpio6", 906, R8A7796_CLK_S3D4),
+ DEF_MOD("gpio5", 907, R8A7796_CLK_S3D4),
+ DEF_MOD("gpio4", 908, R8A7796_CLK_S3D4),
+ DEF_MOD("gpio3", 909, R8A7796_CLK_S3D4),
+ DEF_MOD("gpio2", 910, R8A7796_CLK_S3D4),
+ DEF_MOD("gpio1", 911, R8A7796_CLK_S3D4),
+ DEF_MOD("gpio0", 912, R8A7796_CLK_S3D4),
+ DEF_MOD("can-fd", 914, R8A7796_CLK_S3D2),
+ DEF_MOD("can-if1", 915, R8A7796_CLK_S3D4),
+ DEF_MOD("can-if0", 916, R8A7796_CLK_S3D4),
+ DEF_MOD("i2c6", 918, R8A7796_CLK_S0D6),
+ DEF_MOD("i2c5", 919, R8A7796_CLK_S0D6),
+ DEF_MOD("i2c-dvfs", 926, R8A7796_CLK_CP),
+ DEF_MOD("i2c4", 927, R8A7796_CLK_S0D6),
+ DEF_MOD("i2c3", 928, R8A7796_CLK_S0D6),
+ DEF_MOD("i2c2", 929, R8A7796_CLK_S3D2),
+ DEF_MOD("i2c1", 930, R8A7796_CLK_S3D2),
+ DEF_MOD("i2c0", 931, R8A7796_CLK_S3D2),
+ DEF_MOD("ssi-all", 1005, R8A7796_CLK_S3D4),
+ DEF_MOD("ssi9", 1006, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi8", 1007, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi7", 1008, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi6", 1009, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi5", 1010, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi4", 1011, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi3", 1012, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)),
+ DEF_MOD("scu-all", 1017, R8A7796_CLK_S3D4),
+ DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu1-mix1", 1020, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu0-mix0", 1021, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src9", 1022, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src8", 1023, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src7", 1024, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src6", 1025, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src5", 1026, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src4", 1027, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src3", 1028, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src2", 1029, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src1", 1030, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src0", 1031, MOD_CLK_ID(1017)),
+};
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ * MD EXTAL PLL0 PLL1 PLL2 PLL3 PLL4
+ * 14 13 19 17 (MHz)
+ *-------------------------------------------------------------------
+ * 0 0 0 0 16.66 x 1 x180 x192 x144 x192 x144
+ * 0 0 0 1 16.66 x 1 x180 x192 x144 x128 x144
+ * 0 0 1 0 Prohibited setting
+ * 0 0 1 1 16.66 x 1 x180 x192 x144 x192 x144
+ * 0 1 0 0 20 x 1 x150 x160 x120 x160 x120
+ * 0 1 0 1 20 x 1 x150 x160 x120 x106 x120
+ * 0 1 1 0 Prohibited setting
+ * 0 1 1 1 20 x 1 x150 x160 x120 x160 x120
+ * 1 0 0 0 25 x 1 x120 x128 x96 x128 x96
+ * 1 0 0 1 25 x 1 x120 x128 x96 x84 x96
+ * 1 0 1 0 Prohibited setting
+ * 1 0 1 1 25 x 1 x120 x128 x96 x128 x96
+ * 1 1 0 0 33.33 / 2 x180 x192 x144 x192 x144
+ * 1 1 0 1 33.33 / 2 x180 x192 x144 x128 x144
+ * 1 1 1 0 Prohibited setting
+ * 1 1 1 1 33.33 / 2 x180 x192 x144 x192 x144
+ */
+#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 11) | \
+ (((md) & BIT(13)) >> 11) | \
+ (((md) & BIT(19)) >> 18) | \
+ (((md) & BIT(17)) >> 17))
+
+static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[16] = {
+ /* EXTAL div PLL1 mult PLL3 mult */
+ { 1, 192, 192, },
+ { 1, 192, 128, },
+ { 0, /* Prohibited setting */ },
+ { 1, 192, 192, },
+ { 1, 160, 160, },
+ { 1, 160, 106, },
+ { 0, /* Prohibited setting */ },
+ { 1, 160, 160, },
+ { 1, 128, 128, },
+ { 1, 128, 84, },
+ { 0, /* Prohibited setting */ },
+ { 1, 128, 128, },
+ { 2, 192, 192, },
+ { 2, 192, 128, },
+ { 0, /* Prohibited setting */ },
+ { 2, 192, 192, },
+};
+
+/*
+ * SDn Clock
+ */
+#define CPG_SD_STP_HCK BIT(9)
+#define CPG_SD_STP_CK BIT(8)
+
+#define CPG_SD_STP_MASK (CPG_SD_STP_HCK | CPG_SD_STP_CK)
+#define CPG_SD_FC_MASK (0x7 << 2 | 0x3 << 0)
+
+#define CPG_SD_DIV_TABLE_DATA(stp_hck, stp_ck, sd_srcfc, sd_fc, sd_div) \
+{ \
+ .val = ((stp_hck) ? CPG_SD_STP_HCK : 0) | \
+ ((stp_ck) ? CPG_SD_STP_CK : 0) | \
+ ((sd_srcfc) << 2) | \
+ ((sd_fc) << 0), \
+ .div = (sd_div), \
+}
+
+struct sd_div_table {
+ u32 val;
+ unsigned int div;
+};
+
+/* SDn divider
+ * sd_srcfc sd_fc div
+ * stp_hck stp_ck (div) (div) = sd_srcfc x sd_fc
+ *-------------------------------------------------------------------
+ * 0 0 0 (1) 1 (4) 4
+ * 0 0 1 (2) 1 (4) 8
+ * 1 0 2 (4) 1 (4) 16
+ * 1 0 3 (8) 1 (4) 32
+ * 1 0 4 (16) 1 (4) 64
+ * 0 0 0 (1) 0 (2) 2
+ * 0 0 1 (2) 0 (2) 4
+ * 1 0 2 (4) 0 (2) 8
+ * 1 0 3 (8) 0 (2) 16
+ * 1 0 4 (16) 0 (2) 32
+ */
+static const struct sd_div_table cpg_sd_div_table[] = {
+/* CPG_SD_DIV_TABLE_DATA(stp_hck, stp_ck, sd_srcfc, sd_fc, sd_div) */
+ CPG_SD_DIV_TABLE_DATA(0, 0, 0, 1, 4),
+ CPG_SD_DIV_TABLE_DATA(0, 0, 1, 1, 8),
+ CPG_SD_DIV_TABLE_DATA(1, 0, 2, 1, 16),
+ CPG_SD_DIV_TABLE_DATA(1, 0, 3, 1, 32),
+ CPG_SD_DIV_TABLE_DATA(1, 0, 4, 1, 64),
+ CPG_SD_DIV_TABLE_DATA(0, 0, 0, 0, 2),
+ CPG_SD_DIV_TABLE_DATA(0, 0, 1, 0, 4),
+ CPG_SD_DIV_TABLE_DATA(1, 0, 2, 0, 8),
+ CPG_SD_DIV_TABLE_DATA(1, 0, 3, 0, 16),
+ CPG_SD_DIV_TABLE_DATA(1, 0, 4, 0, 32),
+};
+
+static bool gen3_clk_is_mod(struct clk *clk)
+{
+ return (clk->id >> 16) == CPG_MOD;
+}
+
+static int gen3_clk_get_mod(struct clk *clk, const struct mssr_mod_clk **mssr)
+{
+ struct gen3_clk_priv *priv = dev_get_priv(clk->dev);
+ const unsigned long clkid = clk->id & 0xffff;
+ int i;
+
+ if (!gen3_clk_is_mod(clk))
+ return -EINVAL;
+
+ for (i = 0; i < priv->mod_clk_size; i++) {
+ if (priv->mod_clk[i].id != MOD_CLK_ID(clkid))
+ continue;
+
+ *mssr = &priv->mod_clk[i];
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static int gen3_clk_get_core(struct clk *clk, const struct cpg_core_clk **core)
+{
+ const unsigned long clkid = clk->id & 0xffff;
+ int i;
+
+ if (gen3_clk_is_mod(clk))
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(gen3_core_clks); i++) {
+ if (gen3_core_clks[i].id != clkid)
+ continue;
+
+ *core = &gen3_core_clks[i];
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static int gen3_clk_get_parent(struct clk *clk, struct clk *parent)
+{
+ const struct cpg_core_clk *core;
+ const struct mssr_mod_clk *mssr;
+ int ret;
+
+ if (gen3_clk_is_mod(clk)) {
+ ret = gen3_clk_get_mod(clk, &mssr);
+ if (ret)
+ return ret;
+
+ parent->id = mssr->parent;
+ } else {
+ ret = gen3_clk_get_core(clk, &core);
+ if (ret)
+ return ret;
+
+ if (core->type == CLK_TYPE_IN)
+ parent->id = ~0; /* Top-level clock */
+ else
+ parent->id = core->parent;
+ }
+
+ parent->dev = clk->dev;
+
+ return 0;
+}
+
+static int gen3_clk_endisable(struct clk *clk, bool enable)
+{
+ struct gen3_clk_priv *priv = dev_get_priv(clk->dev);
+ const unsigned long clkid = clk->id & 0xffff;
+ const unsigned int reg = clkid / 100;
+ const unsigned int bit = clkid % 100;
+ const u32 bitmask = BIT(bit);
+
+ if (!gen3_clk_is_mod(clk))
+ return -EINVAL;
+
+ debug("%s[%i] MSTP %lu=%02u/%02u %s\n", __func__, __LINE__,
+ clkid, reg, bit, enable ? "ON" : "OFF");
+
+ if (enable) {
+ clrbits_le32(priv->base + SMSTPCR(reg), bitmask);
+ return wait_for_bit("MSTP", priv->base + MSTPSR(reg),
+ bitmask, 0, 100, 0);
+ } else {
+ setbits_le32(priv->base + SMSTPCR(reg), bitmask);
+ return 0;
+ }
+}
+
+static int gen3_clk_enable(struct clk *clk)
+{
+ return gen3_clk_endisable(clk, true);
+}
+
+static int gen3_clk_disable(struct clk *clk)
+{
+ return gen3_clk_endisable(clk, false);
+}
+
+static ulong gen3_clk_get_rate(struct clk *clk)
+{
+ struct gen3_clk_priv *priv = dev_get_priv(clk->dev);
+ struct clk parent;
+ const struct cpg_core_clk *core;
+ const struct rcar_gen3_cpg_pll_config *pll_config =
+ priv->cpg_pll_config;
+ u32 value, mult, rate = 0;
+ int i, ret;
+
+ debug("%s[%i] Clock: id=%lu\n", __func__, __LINE__, clk->id);
+
+ ret = gen3_clk_get_parent(clk, &parent);
+ if (ret) {
+ printf("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret);
+ return ret;
+ }
+
+ if (gen3_clk_is_mod(clk)) {
+ rate = gen3_clk_get_rate(&parent);
+ debug("%s[%i] MOD clk: parent=%lu => rate=%u\n",
+ __func__, __LINE__, parent.id, rate);
+ return rate;
+ }
+
+ ret = gen3_clk_get_core(clk, &core);
+ if (ret)
+ return ret;
+
+ switch (core->type) {
+ case CLK_TYPE_IN:
+ if (core->id == CLK_EXTAL) {
+ rate = clk_get_rate(&priv->clk_extal);
+ debug("%s[%i] EXTAL clk: rate=%u\n",
+ __func__, __LINE__, rate);
+ return rate;
+ }
+
+ if (core->id == CLK_EXTALR) {
+ rate = clk_get_rate(&priv->clk_extalr);
+ debug("%s[%i] EXTALR clk: rate=%u\n",
+ __func__, __LINE__, rate);
+ return rate;
+ }
+
+ return -EINVAL;
+
+ case CLK_TYPE_GEN3_MAIN:
+ rate = gen3_clk_get_rate(&parent) / pll_config->extal_div;
+ debug("%s[%i] MAIN clk: parent=%i extal_div=%i => rate=%u\n",
+ __func__, __LINE__,
+ core->parent, pll_config->extal_div, rate);
+ return rate;
+
+ case CLK_TYPE_GEN3_PLL0:
+ value = readl(priv->base + CPG_PLL0CR);
+ mult = (((value >> 24) & 0x7f) + 1) * 2;
+ rate = gen3_clk_get_rate(&parent) * mult;
+ debug("%s[%i] PLL0 clk: parent=%i mult=%u => rate=%u\n",
+ __func__, __LINE__, core->parent, mult, rate);
+ return rate;
+
+ case CLK_TYPE_GEN3_PLL1:
+ rate = gen3_clk_get_rate(&parent) * pll_config->pll1_mult;
+ debug("%s[%i] PLL1 clk: parent=%i mul=%i => rate=%u\n",
+ __func__, __LINE__,
+ core->parent, pll_config->pll1_mult, rate);
+ return rate;
+
+ case CLK_TYPE_GEN3_PLL2:
+ value = readl(priv->base + CPG_PLL2CR);
+ mult = (((value >> 24) & 0x7f) + 1) * 2;
+ rate = gen3_clk_get_rate(&parent) * mult;
+ debug("%s[%i] PLL2 clk: parent=%i mult=%u => rate=%u\n",
+ __func__, __LINE__, core->parent, mult, rate);
+ return rate;
+
+ case CLK_TYPE_GEN3_PLL3:
+ rate = gen3_clk_get_rate(&parent) * pll_config->pll3_mult;
+ debug("%s[%i] PLL3 clk: parent=%i mul=%i => rate=%u\n",
+ __func__, __LINE__,
+ core->parent, pll_config->pll3_mult, rate);
+ return rate;
+
+ case CLK_TYPE_GEN3_PLL4:
+ value = readl(priv->base + CPG_PLL4CR);
+ mult = (((value >> 24) & 0x7f) + 1) * 2;
+ rate = gen3_clk_get_rate(&parent) * mult;
+ debug("%s[%i] PLL4 clk: parent=%i mult=%u => rate=%u\n",
+ __func__, __LINE__, core->parent, mult, rate);
+ return rate;
+
+ case CLK_TYPE_FF:
+ rate = (gen3_clk_get_rate(&parent) * core->mult) / core->div;
+ debug("%s[%i] FIXED clk: parent=%i div=%i mul=%i => rate=%u\n",
+ __func__, __LINE__,
+ core->parent, core->mult, core->div, rate);
+ return rate;
+
+ case CLK_TYPE_GEN3_SD: /* FIXME */
+ value = readl(priv->base + core->offset);
+ value &= CPG_SD_STP_MASK | CPG_SD_FC_MASK;
+
+ for (i = 0; i < ARRAY_SIZE(cpg_sd_div_table); i++) {
+ if (cpg_sd_div_table[i].val != value)
+ continue;
+
+ rate = gen3_clk_get_rate(&parent) /
+ cpg_sd_div_table[i].div;
+ debug("%s[%i] SD clk: parent=%i div=%i => rate=%u\n",
+ __func__, __LINE__,
+ core->parent, cpg_sd_div_table[i].div, rate);
+
+ return rate;
+ }
+
+ return -EINVAL;
+ }
+
+ printf("%s[%i] unknown fail\n", __func__, __LINE__);
+
+ return -ENOENT;
+}
+
+static ulong gen3_clk_set_rate(struct clk *clk, ulong rate)
+{
+ return gen3_clk_get_rate(clk);
+}
+
+static int gen3_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args)
+{
+ if (args->args_count != 2) {
+ debug("Invaild args_count: %d\n", args->args_count);
+ return -EINVAL;
+ }
+
+ clk->id = (args->args[0] << 16) | args->args[1];
+
+ return 0;
+}
+
+static const struct clk_ops gen3_clk_ops = {
+ .enable = gen3_clk_enable,
+ .disable = gen3_clk_disable,
+ .get_rate = gen3_clk_get_rate,
+ .set_rate = gen3_clk_set_rate,
+ .of_xlate = gen3_clk_of_xlate,
+};
+
+enum gen3_clk_model {
+ CLK_R8A7795,
+ CLK_R8A7796,
+};
+
+static int gen3_clk_probe(struct udevice *dev)
+{
+ struct gen3_clk_priv *priv = dev_get_priv(dev);
+ enum gen3_clk_model model = dev_get_driver_data(dev);
+ fdt_addr_t rst_base;
+ u32 cpg_mode;
+ int ret;
+
+ priv->base = (struct gen3_base *)devfdt_get_addr(dev);
+ if (!priv->base)
+ return -EINVAL;
+
+ switch (model) {
+ case CLK_R8A7795:
+ priv->mod_clk = r8a7795_mod_clks;
+ priv->mod_clk_size = ARRAY_SIZE(r8a7795_mod_clks);
+ ret = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
+ "renesas,r8a7795-rst");
+ if (ret < 0)
+ return ret;
+ break;
+ case CLK_R8A7796:
+ priv->mod_clk = r8a7796_mod_clks;
+ priv->mod_clk_size = ARRAY_SIZE(r8a7796_mod_clks);
+ ret = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
+ "renesas,r8a7796-rst");
+ if (ret < 0)
+ return ret;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rst_base = fdtdec_get_addr(gd->fdt_blob, ret, "reg");
+ if (rst_base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ cpg_mode = readl(rst_base + CPG_RST_MODEMR);
+
+ priv->cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+ if (!priv->cpg_pll_config->extal_div)
+ return -EINVAL;
+
+ ret = clk_get_by_name(dev, "extal", &priv->clk_extal);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_get_by_name(dev, "extalr", &priv->clk_extalr);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static const struct udevice_id gen3_clk_ids[] = {
+ { .compatible = "renesas,r8a7795-cpg-mssr", .data = CLK_R8A7795 },
+ { .compatible = "renesas,r8a7796-cpg-mssr", .data = CLK_R8A7796 },
+ { }
+};
+
+U_BOOT_DRIVER(clk_gen3) = {
+ .name = "clk_gen3",
+ .id = UCLASS_CLK,
+ .of_match = gen3_clk_ids,
+ .priv_auto_alloc_size = sizeof(struct gen3_clk_priv),
+ .ops = &gen3_clk_ops,
+ .probe = gen3_clk_probe,
+};
driver from the common Intel ICH6 driver. It supports a total of
95 GPIOs which can be configured from the device tree.
+config INTEL_ICH6_GPIO
+ bool "Intel ICH6 compatible legacy GPIO driver"
+ depends on DM_GPIO
+ help
+ Say yes here to select Intel ICH6 compatible legacy GPIO driver.
+
config IMX_RGPIO2P
bool "i.MX7ULP RGPIO2P driver"
depends on DM
option will be removed as soon as all DM_MMC drivers use it, as it
will the only supported behaviour.
+config SPL_DM_MMC
+ bool "Enable MMC controllers using Driver Model in SPL"
+ depends on SPL_DM && DM_MMC
+ default y
+ help
+ This enables the MultiMediaCard (MMC) uclass which supports MMC and
+ Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
+ and non-removable (e.g. eMMC chip) devices are supported. These
+ appear as block devices in U-Boot and can support filesystems such
+ as EXT4 and FAT.
+
+config SPL_DM_MMC_OPS
+ bool "Support MMC controller operations using Driver Model in SPL"
+ depends on SPL_DM && DM_MMC_OPS
+ default y
+ help
+ Driver model provides a means of supporting device operations. This
+ option moves MMC operations under the control of driver model. The
+ option will be removed as soon as all DM_MMC drivers use it, as it
+ will the only supported behaviour.
+
if MMC
config SPL_MMC_TINY
#
obj-y += mmc.o
-obj-$(CONFIG_DM_MMC) += mmc-uclass.o
+obj-$(CONFIG_$(SPL_)DM_MMC) += mmc-uclass.o
-ifndef CONFIG_BLK
+ifndef CONFIG_$(SPL_)BLK
obj-y += mmc_legacy.o
endif
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_DM_MMC_OPS
+#if CONFIG_IS_ENABLED(DM_MMC_OPS)
int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
struct mmc_data *data)
{
return upriv->mmc;
}
-#ifdef CONFIG_BLK
+#if CONFIG_IS_ENABLED(BLK)
struct mmc *find_mmc_device(int dev_num)
{
struct udevice *dev, *mmc_dev;
struct udevice *bdev;
int ret, devnum = -1;
-#ifdef CONFIG_DM_MMC_OPS
+#if CONFIG_IS_ENABLED(DM_MMC_OPS)
if (!mmc_get_ops(dev))
return -ENOSYS;
#endif
}
#endif
-#ifndef CONFIG_DM_MMC_OPS
+#if !CONFIG_IS_ENABLED(DM_MMC_OPS)
__weak int board_mmc_getwp(struct mmc *mmc)
{
return -1;
}
#endif
-#ifndef CONFIG_DM_MMC_OPS
+#if !CONFIG_IS_ENABLED(DM_MMC_OPS)
int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
{
int ret;
return blkcnt;
}
-#ifdef CONFIG_BLK
+#if CONFIG_IS_ENABLED(BLK)
ulong mmc_bread(struct udevice *dev, lbaint_t start, lbaint_t blkcnt, void *dst)
#else
ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
void *dst)
#endif
{
-#ifdef CONFIG_BLK
+#if CONFIG_IS_ENABLED(BLK)
struct blk_desc *block_dev = dev_get_uclass_platdata(dev);
#endif
int dev_num = block_dev->devnum;
return 0;
}
-#ifndef CONFIG_DM_MMC_OPS
+#if !CONFIG_IS_ENABLED(DM_MMC_OPS)
int mmc_getcd(struct mmc *mmc)
{
int cd;
80,
};
-#ifndef CONFIG_DM_MMC_OPS
+#if !CONFIG_IS_ENABLED(DM_MMC_OPS)
static void mmc_set_ios(struct mmc *mmc)
{
if (mmc->cfg->ops->set_ios)
return 0;
}
-#ifndef CONFIG_DM_MMC
+#if !CONFIG_IS_ENABLED(DM_MMC)
/* board-specific MMC power initializations. */
__weak void board_mmc_power_init(void)
{
static int mmc_power_init(struct mmc *mmc)
{
-#if defined(CONFIG_DM_MMC)
+#if CONFIG_IS_ENABLED(DM_MMC)
#if defined(CONFIG_DM_REGULATOR) && !defined(CONFIG_SPL_BUILD)
struct udevice *vmmc_supply;
int ret;
/* we pretend there's no card when init is NULL */
no_card = mmc_getcd(mmc) == 0;
-#ifndef CONFIG_DM_MMC_OPS
+#if !CONFIG_IS_ENABLED(DM_MMC_OPS)
no_card = no_card || (mmc->cfg->ops->init == NULL);
#endif
if (no_card) {
if (err)
return err;
-#ifdef CONFIG_DM_MMC_OPS
+#if CONFIG_IS_ENABLED(DM_MMC_OPS)
/* The device has already been probed ready for use */
#else
/* made sure it's not NULL earlier */
{
int err = 0;
__maybe_unused unsigned start;
-#ifdef CONFIG_DM_MMC
+#if CONFIG_IS_ENABLED(DM_MMC)
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(mmc->dev);
upriv->mmc = mmc;
mmc->preinit = preinit;
}
-#if defined(CONFIG_DM_MMC) && defined(CONFIG_SPL_BUILD)
+#if CONFIG_IS_ENABLED(DM_MMC) && defined(CONFIG_SPL_BUILD)
static int mmc_probe(bd_t *bis)
{
return 0;
}
-#elif defined(CONFIG_DM_MMC)
+#elif CONFIG_IS_ENABLED(DM_MMC)
static int mmc_probe(bd_t *bis)
{
int ret, i;
return 0;
initialized = 1;
-#ifndef CONFIG_BLK
+#if !CONFIG_IS_ENABLED(BLK)
#if !CONFIG_IS_ENABLED(MMC_TINY)
mmc_list_init();
#endif
cfg->f_max == 0 || cfg->b_max == 0)
return NULL;
-#ifndef CONFIG_DM_MMC_OPS
+#if !CONFIG_IS_ENABLED(DM_MMC_OPS)
if (cfg->ops == NULL || cfg->ops->send_cmd == NULL)
return NULL;
#endif
void mmc_adapter_card_type_ident(void);
#endif
-#ifdef CONFIG_BLK
+#if CONFIG_IS_ENABLED(BLK)
ulong mmc_bread(struct udevice *dev, lbaint_t start, lbaint_t blkcnt,
void *dst);
#else
#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV))
-#ifdef CONFIG_BLK
+#if CONFIG_IS_ENABLED(BLK)
ulong mmc_bwrite(struct udevice *dev, lbaint_t start, lbaint_t blkcnt,
const void *src);
ulong mmc_berase(struct udevice *dev, lbaint_t start, lbaint_t blkcnt);
/* declare dummies to reduce code size. */
-#ifdef CONFIG_BLK
+#if CONFIG_IS_ENABLED(BLK)
static inline unsigned long mmc_berase(struct udevice *dev,
lbaint_t start, lbaint_t blkcnt)
{
struct omap_hsmmc_data {
struct hsmmc *base_addr;
-#ifndef CONFIG_DM_MMC
+#if !CONFIG_IS_ENABLED(DM_MMC)
struct mmc_config cfg;
#endif
#ifdef OMAP_HSMMC_USE_GPIO
-#ifdef CONFIG_DM_MMC
+#if CONFIG_IS_ENABLED(DM_MMC)
struct gpio_desc cd_gpio; /* Change Detect GPIO */
struct gpio_desc wp_gpio; /* Write Protect GPIO */
bool cd_inverted;
static inline struct omap_hsmmc_data *omap_hsmmc_get_data(struct mmc *mmc)
{
-#ifdef CONFIG_DM_MMC
+#if CONFIG_IS_ENABLED(DM_MMC)
return dev_get_priv(mmc->dev);
#else
return (struct omap_hsmmc_data *)mmc->priv;
}
static inline struct mmc_config *omap_hsmmc_get_cfg(struct mmc *mmc)
{
-#ifdef CONFIG_DM_MMC
+#if CONFIG_IS_ENABLED(DM_MMC)
struct omap_hsmmc_plat *plat = dev_get_platdata(mmc->dev);
return &plat->cfg;
#else
#endif
}
- #if defined(OMAP_HSMMC_USE_GPIO) && !defined(CONFIG_DM_MMC)
+#if defined(OMAP_HSMMC_USE_GPIO) && !CONFIG_IS_ENABLED(DM_MMC)
static int omap_mmc_setup_gpio_in(int gpio, const char *label)
{
int ret;
}
}
}
-#ifndef CONFIG_DM_MMC
+#if !CONFIG_IS_ENABLED(DM_MMC)
static int omap_hsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
struct mmc_data *data)
{
return 0;
}
-#ifndef CONFIG_DM_MMC
+#if !CONFIG_IS_ENABLED(DM_MMC)
static int omap_hsmmc_set_ios(struct mmc *mmc)
{
struct omap_hsmmc_data *priv = omap_hsmmc_get_data(mmc);
}
#ifdef OMAP_HSMMC_USE_GPIO
-#ifdef CONFIG_DM_MMC
+#if CONFIG_IS_ENABLED(DM_MMC)
static int omap_hsmmc_getcd(struct udevice *dev)
{
struct omap_hsmmc_data *priv = dev_get_priv(dev);
#endif
#endif
-#ifdef CONFIG_DM_MMC
+#if CONFIG_IS_ENABLED(DM_MMC)
static const struct dm_mmc_ops omap_hsmmc_ops = {
.send_cmd = omap_hsmmc_send_cmd,
.set_ios = omap_hsmmc_set_ios,
};
#endif
-#ifndef CONFIG_DM_MMC
+#if !CONFIG_IS_ENABLED(DM_MMC)
int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
int wp_gpio)
{
*/
#include <common.h>
+#include <dm.h>
#include <errno.h>
#include <malloc.h>
+#include <mapmem.h>
#include <sdhci.h>
#include <asm/pci.h>
-int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported)
+struct pci_mmc_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+
+struct pci_mmc_priv {
+ struct sdhci_host host;
+ void *base;
+};
+
+static int pci_mmc_probe(struct udevice *dev)
{
- struct sdhci_host *mmc_host;
- u32 iobase;
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct pci_mmc_plat *plat = dev_get_platdata(dev);
+ struct pci_mmc_priv *priv = dev_get_priv(dev);
+ struct sdhci_host *host = &priv->host;
+ u32 ioaddr;
int ret;
- int i;
-
- for (i = 0; ; i++) {
- struct udevice *dev;
-
- ret = pci_find_device_id(mmc_supported, i, &dev);
- if (ret)
- return ret;
- mmc_host = malloc(sizeof(struct sdhci_host));
- if (!mmc_host)
- return -ENOMEM;
-
- mmc_host->name = name;
- dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0, &iobase);
- mmc_host->ioaddr = (void *)(ulong)iobase;
- mmc_host->quirks = 0;
- mmc_host->max_clk = 0;
- ret = add_sdhci(mmc_host, 0, 0);
- if (ret)
- return ret;
- }
-
- return 0;
+
+ dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0, &ioaddr);
+ host->ioaddr = map_sysmem(ioaddr, 0);
+ host->name = dev->name;
+ ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
+ if (ret)
+ return ret;
+ host->mmc = &plat->mmc;
+ host->mmc->priv = &priv->host;
+ host->mmc->dev = dev;
+ upriv->mmc = host->mmc;
+
+ return sdhci_probe(dev);
}
+
+static int pci_mmc_bind(struct udevice *dev)
+{
+ struct pci_mmc_plat *plat = dev_get_platdata(dev);
+
+ return sdhci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+U_BOOT_DRIVER(pci_mmc) = {
+ .name = "pci_mmc",
+ .id = UCLASS_MMC,
+ .bind = pci_mmc_bind,
+ .probe = pci_mmc_probe,
+ .ops = &sdhci_ops,
+ .priv_auto_alloc_size = sizeof(struct pci_mmc_priv),
+ .platdata_auto_alloc_size = sizeof(struct pci_mmc_plat),
+};
+
+static struct pci_device_id mmc_supported[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_SDIO) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_SD) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_EMMC2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_SDIO) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SDIO_0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SDIO_1) },
+ {},
+};
+
+U_BOOT_PCI_DEVICE(pci_mmc, mmc_supported);
*/
#include <common.h>
+#include <dm.h>
#include <errno.h>
#include <malloc.h>
#include <mmc.h>
#include <asm/arch/mmc.h>
#include <asm-generic/gpio.h>
-struct sunxi_mmc_host {
+struct sunxi_mmc_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+
+struct sunxi_mmc_priv {
unsigned mmc_no;
uint32_t *mclkreg;
unsigned fatal_err;
+ struct gpio_desc cd_gpio; /* Change Detect GPIO */
struct sunxi_mmc *reg;
struct mmc_config cfg;
};
+#if !CONFIG_IS_ENABLED(DM_MMC)
/* support 4 mmc hosts */
-struct sunxi_mmc_host mmc_host[4];
+struct sunxi_mmc_priv mmc_host[4];
static int sunxi_mmc_getcd_gpio(int sdc_no)
{
static int mmc_resource_init(int sdc_no)
{
- struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
+ struct sunxi_mmc_priv *priv = &mmc_host[sdc_no];
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int cd_pin, ret = 0;
switch (sdc_no) {
case 0:
- mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE;
- mmchost->mclkreg = &ccm->sd0_clk_cfg;
+ priv->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE;
+ priv->mclkreg = &ccm->sd0_clk_cfg;
break;
case 1:
- mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE;
- mmchost->mclkreg = &ccm->sd1_clk_cfg;
+ priv->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE;
+ priv->mclkreg = &ccm->sd1_clk_cfg;
break;
case 2:
- mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE;
- mmchost->mclkreg = &ccm->sd2_clk_cfg;
+ priv->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE;
+ priv->mclkreg = &ccm->sd2_clk_cfg;
break;
case 3:
- mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE;
- mmchost->mclkreg = &ccm->sd3_clk_cfg;
+ priv->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE;
+ priv->mclkreg = &ccm->sd3_clk_cfg;
break;
default:
printf("Wrong mmc number %d\n", sdc_no);
return -1;
}
- mmchost->mmc_no = sdc_no;
+ priv->mmc_no = sdc_no;
cd_pin = sunxi_mmc_getcd_gpio(sdc_no);
if (cd_pin >= 0) {
return ret;
}
+#endif
-static int mmc_set_mod_clk(struct sunxi_mmc_host *mmchost, unsigned int hz)
+static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
{
unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
}
if (n > 3) {
- printf("mmc %u error cannot set clock to %u\n",
- mmchost->mmc_no, hz);
+ printf("mmc %u error cannot set clock to %u\n", priv->mmc_no,
+ hz);
return -1;
}
writel(CCM_MMC_CTRL_ENABLE | pll | CCM_MMC_CTRL_SCLK_DLY(sclk_dly) |
CCM_MMC_CTRL_N(n) | CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
- CCM_MMC_CTRL_M(div), mmchost->mclkreg);
+ CCM_MMC_CTRL_M(div), priv->mclkreg);
debug("mmc %u set mod-clk req %u parent %u n %u m %u rate %u\n",
- mmchost->mmc_no, hz, pll_hz, 1u << n, div,
- pll_hz / (1u << n) / div);
+ priv->mmc_no, hz, pll_hz, 1u << n, div, pll_hz / (1u << n) / div);
return 0;
}
-static int mmc_clk_io_on(int sdc_no)
+static int mmc_update_clk(struct sunxi_mmc_priv *priv)
{
- struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- debug("init mmc %d clock and io\n", sdc_no);
-
- /* config ahb clock */
- setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
-
-#ifdef CONFIG_SUNXI_GEN_SUN6I
- /* unassert reset */
- setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
-#endif
-#if defined(CONFIG_MACH_SUN9I)
- /* sun9i has a mmc-common module, also set the gate and reset there */
- writel(SUNXI_MMC_COMMON_CLK_GATE | SUNXI_MMC_COMMON_RESET,
- SUNXI_MMC_COMMON_BASE + 4 * sdc_no);
-#endif
-
- return mmc_set_mod_clk(mmchost, 24000000);
-}
-
-static int mmc_update_clk(struct mmc *mmc)
-{
- struct sunxi_mmc_host *mmchost = mmc->priv;
unsigned int cmd;
unsigned timeout_msecs = 2000;
cmd = SUNXI_MMC_CMD_START |
SUNXI_MMC_CMD_UPCLK_ONLY |
SUNXI_MMC_CMD_WAIT_PRE_OVER;
- writel(cmd, &mmchost->reg->cmd);
- while (readl(&mmchost->reg->cmd) & SUNXI_MMC_CMD_START) {
+ writel(cmd, &priv->reg->cmd);
+ while (readl(&priv->reg->cmd) & SUNXI_MMC_CMD_START) {
if (!timeout_msecs--)
return -1;
udelay(1000);
}
/* clock update sets various irq status bits, clear these */
- writel(readl(&mmchost->reg->rint), &mmchost->reg->rint);
+ writel(readl(&priv->reg->rint), &priv->reg->rint);
return 0;
}
-static int mmc_config_clock(struct mmc *mmc)
+static int mmc_config_clock(struct sunxi_mmc_priv *priv, struct mmc *mmc)
{
- struct sunxi_mmc_host *mmchost = mmc->priv;
- unsigned rval = readl(&mmchost->reg->clkcr);
+ unsigned rval = readl(&priv->reg->clkcr);
/* Disable Clock */
rval &= ~SUNXI_MMC_CLK_ENABLE;
- writel(rval, &mmchost->reg->clkcr);
- if (mmc_update_clk(mmc))
+ writel(rval, &priv->reg->clkcr);
+ if (mmc_update_clk(priv))
return -1;
/* Set mod_clk to new rate */
- if (mmc_set_mod_clk(mmchost, mmc->clock))
+ if (mmc_set_mod_clk(priv, mmc->clock))
return -1;
/* Clear internal divider */
rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
- writel(rval, &mmchost->reg->clkcr);
+ writel(rval, &priv->reg->clkcr);
/* Re-enable Clock */
rval |= SUNXI_MMC_CLK_ENABLE;
- writel(rval, &mmchost->reg->clkcr);
- if (mmc_update_clk(mmc))
+ writel(rval, &priv->reg->clkcr);
+ if (mmc_update_clk(priv))
return -1;
return 0;
}
-static int sunxi_mmc_set_ios(struct mmc *mmc)
+static int sunxi_mmc_set_ios_common(struct sunxi_mmc_priv *priv,
+ struct mmc *mmc)
{
- struct sunxi_mmc_host *mmchost = mmc->priv;
-
debug("set ios: bus_width: %x, clock: %d\n",
mmc->bus_width, mmc->clock);
/* Change clock first */
- if (mmc->clock && mmc_config_clock(mmc) != 0) {
- mmchost->fatal_err = 1;
+ if (mmc->clock && mmc_config_clock(priv, mmc) != 0) {
+ priv->fatal_err = 1;
return -EINVAL;
}
/* Change bus width */
if (mmc->bus_width == 8)
- writel(0x2, &mmchost->reg->width);
+ writel(0x2, &priv->reg->width);
else if (mmc->bus_width == 4)
- writel(0x1, &mmchost->reg->width);
+ writel(0x1, &priv->reg->width);
else
- writel(0x0, &mmchost->reg->width);
+ writel(0x0, &priv->reg->width);
return 0;
}
+#if !CONFIG_IS_ENABLED(DM_MMC)
static int sunxi_mmc_core_init(struct mmc *mmc)
{
- struct sunxi_mmc_host *mmchost = mmc->priv;
+ struct sunxi_mmc_priv *priv = mmc->priv;
/* Reset controller */
- writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
+ writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl);
udelay(1000);
return 0;
}
+#endif
-static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data)
+static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc,
+ struct mmc_data *data)
{
- struct sunxi_mmc_host *mmchost = mmc->priv;
const int reading = !!(data->flags & MMC_DATA_READ);
const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY :
SUNXI_MMC_STATUS_FIFO_FULL;
timeout_usecs = 2000000;
/* Always read / write data through the CPU */
- setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
+ setbits_le32(&priv->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
for (i = 0; i < (byte_cnt >> 2); i++) {
- while (readl(&mmchost->reg->status) & status_bit) {
+ while (readl(&priv->reg->status) & status_bit) {
if (!timeout_usecs--)
return -1;
udelay(1);
}
if (reading)
- buff[i] = readl(&mmchost->reg->fifo);
+ buff[i] = readl(&priv->reg->fifo);
else
- writel(buff[i], &mmchost->reg->fifo);
+ writel(buff[i], &priv->reg->fifo);
}
return 0;
}
-static int mmc_rint_wait(struct mmc *mmc, unsigned int timeout_msecs,
- unsigned int done_bit, const char *what)
+static int mmc_rint_wait(struct sunxi_mmc_priv *priv, struct mmc *mmc,
+ uint timeout_msecs, uint done_bit, const char *what)
{
- struct sunxi_mmc_host *mmchost = mmc->priv;
unsigned int status;
do {
- status = readl(&mmchost->reg->rint);
+ status = readl(&priv->reg->rint);
if (!timeout_msecs-- ||
(status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) {
debug("%s timeout %x\n", what,
return 0;
}
-static int sunxi_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
- struct mmc_data *data)
+static int sunxi_mmc_send_cmd_common(struct sunxi_mmc_priv *priv,
+ struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data)
{
- struct sunxi_mmc_host *mmchost = mmc->priv;
unsigned int cmdval = SUNXI_MMC_CMD_START;
unsigned int timeout_msecs;
int error = 0;
unsigned int status = 0;
unsigned int bytecnt = 0;
- if (mmchost->fatal_err)
+ if (priv->fatal_err)
return -1;
if (cmd->resp_type & MMC_RSP_BUSY)
debug("mmc cmd %d check rsp busy\n", cmd->cmdidx);
cmdval |= SUNXI_MMC_CMD_WRITE;
if (data->blocks > 1)
cmdval |= SUNXI_MMC_CMD_AUTO_STOP;
- writel(data->blocksize, &mmchost->reg->blksz);
- writel(data->blocks * data->blocksize, &mmchost->reg->bytecnt);
+ writel(data->blocksize, &priv->reg->blksz);
+ writel(data->blocks * data->blocksize, &priv->reg->bytecnt);
}
- debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", mmchost->mmc_no,
+ debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", priv->mmc_no,
cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg);
- writel(cmd->cmdarg, &mmchost->reg->arg);
+ writel(cmd->cmdarg, &priv->reg->arg);
if (!data)
- writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
+ writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
/*
* transfer data and check status
bytecnt = data->blocksize * data->blocks;
debug("trans data %d bytes\n", bytecnt);
- writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
- ret = mmc_trans_data_by_cpu(mmc, data);
+ writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
+ ret = mmc_trans_data_by_cpu(priv, mmc, data);
if (ret) {
- error = readl(&mmchost->reg->rint) & \
+ error = readl(&priv->reg->rint) &
SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT;
error = -ETIMEDOUT;
goto out;
}
}
- error = mmc_rint_wait(mmc, 1000, SUNXI_MMC_RINT_COMMAND_DONE, "cmd");
+ error = mmc_rint_wait(priv, mmc, 1000, SUNXI_MMC_RINT_COMMAND_DONE,
+ "cmd");
if (error)
goto out;
if (data) {
timeout_msecs = 120;
debug("cacl timeout %x msec\n", timeout_msecs);
- error = mmc_rint_wait(mmc, timeout_msecs,
+ error = mmc_rint_wait(priv, mmc, timeout_msecs,
data->blocks > 1 ?
SUNXI_MMC_RINT_AUTO_COMMAND_DONE :
SUNXI_MMC_RINT_DATA_OVER,
if (cmd->resp_type & MMC_RSP_BUSY) {
timeout_msecs = 2000;
do {
- status = readl(&mmchost->reg->status);
+ status = readl(&priv->reg->status);
if (!timeout_msecs--) {
debug("busy timeout\n");
error = -ETIMEDOUT;
}
if (cmd->resp_type & MMC_RSP_136) {
- cmd->response[0] = readl(&mmchost->reg->resp3);
- cmd->response[1] = readl(&mmchost->reg->resp2);
- cmd->response[2] = readl(&mmchost->reg->resp1);
- cmd->response[3] = readl(&mmchost->reg->resp0);
+ cmd->response[0] = readl(&priv->reg->resp3);
+ cmd->response[1] = readl(&priv->reg->resp2);
+ cmd->response[2] = readl(&priv->reg->resp1);
+ cmd->response[3] = readl(&priv->reg->resp0);
debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n",
cmd->response[3], cmd->response[2],
cmd->response[1], cmd->response[0]);
} else {
- cmd->response[0] = readl(&mmchost->reg->resp0);
+ cmd->response[0] = readl(&priv->reg->resp0);
debug("mmc resp 0x%08x\n", cmd->response[0]);
}
out:
if (error < 0) {
- writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
- mmc_update_clk(mmc);
+ writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl);
+ mmc_update_clk(priv);
}
- writel(0xffffffff, &mmchost->reg->rint);
- writel(readl(&mmchost->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET,
- &mmchost->reg->gctrl);
+ writel(0xffffffff, &priv->reg->rint);
+ writel(readl(&priv->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET,
+ &priv->reg->gctrl);
return error;
}
-static int sunxi_mmc_getcd(struct mmc *mmc)
+#if !CONFIG_IS_ENABLED(DM_MMC)
+static int sunxi_mmc_set_ios_legacy(struct mmc *mmc)
{
- struct sunxi_mmc_host *mmchost = mmc->priv;
+ struct sunxi_mmc_priv *priv = mmc->priv;
+
+ return sunxi_mmc_set_ios_common(priv, mmc);
+}
+
+static int sunxi_mmc_send_cmd_legacy(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct sunxi_mmc_priv *priv = mmc->priv;
+
+ return sunxi_mmc_send_cmd_common(priv, mmc, cmd, data);
+}
+
+static int sunxi_mmc_getcd_legacy(struct mmc *mmc)
+{
+ struct sunxi_mmc_priv *priv = mmc->priv;
int cd_pin;
- cd_pin = sunxi_mmc_getcd_gpio(mmchost->mmc_no);
+ cd_pin = sunxi_mmc_getcd_gpio(priv->mmc_no);
if (cd_pin < 0)
return 1;
}
static const struct mmc_ops sunxi_mmc_ops = {
- .send_cmd = sunxi_mmc_send_cmd,
- .set_ios = sunxi_mmc_set_ios,
+ .send_cmd = sunxi_mmc_send_cmd_legacy,
+ .set_ios = sunxi_mmc_set_ios_legacy,
.init = sunxi_mmc_core_init,
- .getcd = sunxi_mmc_getcd,
+ .getcd = sunxi_mmc_getcd_legacy,
};
struct mmc *sunxi_mmc_init(int sdc_no)
{
- struct mmc_config *cfg = &mmc_host[sdc_no].cfg;
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_mmc_priv *priv = &mmc_host[sdc_no];
+ struct mmc_config *cfg = &priv->cfg;
+ int ret;
- memset(&mmc_host[sdc_no], 0, sizeof(struct sunxi_mmc_host));
+ memset(priv, '\0', sizeof(struct sunxi_mmc_priv));
cfg->name = "SUNXI SD/MMC";
cfg->ops = &sunxi_mmc_ops;
if (mmc_resource_init(sdc_no) != 0)
return NULL;
- mmc_clk_io_on(sdc_no);
+ /* config ahb clock */
+ debug("init mmc %d clock and io\n", sdc_no);
+ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
- return mmc_create(cfg, &mmc_host[sdc_no]);
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+ /* unassert reset */
+ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
+#endif
+#if defined(CONFIG_MACH_SUN9I)
+ /* sun9i has a mmc-common module, also set the gate and reset there */
+ writel(SUNXI_MMC_COMMON_CLK_GATE | SUNXI_MMC_COMMON_RESET,
+ SUNXI_MMC_COMMON_BASE + 4 * sdc_no);
+#endif
+ ret = mmc_set_mod_clk(priv, 24000000);
+ if (ret)
+ return NULL;
+
+ return mmc_create(cfg, mmc_host);
+}
+#else
+
+static int sunxi_mmc_set_ios(struct udevice *dev)
+{
+ struct sunxi_mmc_plat *plat = dev_get_platdata(dev);
+ struct sunxi_mmc_priv *priv = dev_get_priv(dev);
+
+ return sunxi_mmc_set_ios_common(priv, &plat->mmc);
}
+
+static int sunxi_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct sunxi_mmc_plat *plat = dev_get_platdata(dev);
+ struct sunxi_mmc_priv *priv = dev_get_priv(dev);
+
+ return sunxi_mmc_send_cmd_common(priv, &plat->mmc, cmd, data);
+}
+
+static int sunxi_mmc_getcd(struct udevice *dev)
+{
+ struct sunxi_mmc_priv *priv = dev_get_priv(dev);
+
+ if (dm_gpio_is_valid(&priv->cd_gpio))
+ return dm_gpio_get_value(&priv->cd_gpio);
+
+ return 1;
+}
+
+static const struct dm_mmc_ops sunxi_mmc_ops = {
+ .send_cmd = sunxi_mmc_send_cmd,
+ .set_ios = sunxi_mmc_set_ios,
+ .get_cd = sunxi_mmc_getcd,
+};
+
+static int sunxi_mmc_probe(struct udevice *dev)
+{
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct sunxi_mmc_plat *plat = dev_get_platdata(dev);
+ struct sunxi_mmc_priv *priv = dev_get_priv(dev);
+ struct mmc_config *cfg = &plat->cfg;
+ struct ofnode_phandle_args args;
+ u32 *gate_reg;
+ int bus_width, ret;
+
+ cfg->name = dev->name;
+ bus_width = dev_read_u32_default(dev, "bus-width", 1);
+
+ cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+ cfg->host_caps = 0;
+ if (bus_width == 8)
+ cfg->host_caps |= MMC_MODE_8BIT;
+ if (bus_width >= 4)
+ cfg->host_caps |= MMC_MODE_4BIT;
+ cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
+ cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+
+ cfg->f_min = 400000;
+ cfg->f_max = 52000000;
+
+ priv->reg = (void *)dev_read_addr(dev);
+
+ /* We don't have a sunxi clock driver so find the clock address here */
+ ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
+ 1, &args);
+ if (ret)
+ return ret;
+ priv->mclkreg = (u32 *)ofnode_get_addr(args.node);
+
+ ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
+ 0, &args);
+ if (ret)
+ return ret;
+ gate_reg = (u32 *)ofnode_get_addr(args.node);
+ setbits_le32(gate_reg, 1 << args.args[0]);
+ priv->mmc_no = args.args[0] - 8;
+
+ ret = mmc_set_mod_clk(priv, 24000000);
+ if (ret)
+ return ret;
+
+ /* This GPIO is optional */
+ if (!gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio,
+ GPIOD_IS_IN)) {
+ int cd_pin = gpio_get_number(&priv->cd_gpio);
+
+ sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP);
+ }
+
+ upriv->mmc = &plat->mmc;
+
+ /* Reset controller */
+ writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl);
+ udelay(1000);
+
+ return 0;
+}
+
+static int sunxi_mmc_bind(struct udevice *dev)
+{
+ struct sunxi_mmc_plat *plat = dev_get_platdata(dev);
+
+ return mmc_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static const struct udevice_id sunxi_mmc_ids[] = {
+ { .compatible = "allwinner,sun5i-a13-mmc" },
+ { }
+};
+
+U_BOOT_DRIVER(sunxi_mmc_drv) = {
+ .name = "sunxi_mmc",
+ .id = UCLASS_MMC,
+ .of_match = sunxi_mmc_ids,
+ .bind = sunxi_mmc_bind,
+ .probe = sunxi_mmc_probe,
+ .ops = &sunxi_mmc_ops,
+ .platdata_auto_alloc_size = sizeof(struct sunxi_mmc_plat),
+ .priv_auto_alloc_size = sizeof(struct sunxi_mmc_priv),
+};
+#endif
*/
#include <common.h>
+#include <clk.h>
#include <dm.h>
#include <errno.h>
#include <miiphy.h>
struct phy_device *phydev;
struct mii_dev *bus;
void __iomem *iobase;
+ struct clk clk;
};
static inline void ravb_flush_dcache(u32 addr, u32 len)
struct ravb_priv *eth = dev_get_priv(dev);
struct eth_pdata *pdata = dev_get_platdata(dev);
struct phy_device *phydev;
- int reg;
+ int mask = 0xffffffff, reg;
- phydev = phy_connect(eth->bus, pdata->phy_interface,
- dev, PHY_INTERFACE_MODE_RGMII_ID);
+ phydev = phy_find_by_mask(eth->bus, mask, pdata->phy_interface);
if (!phydev)
return -ENODEV;
+ phy_connect_dev(phydev, dev);
+
eth->phydev = phydev;
/* 10BASE is not supported for Ethernet AVB MAC */
struct ravb_priv *eth = dev_get_priv(dev);
int ret;
- ret = ravb_reset(dev);
+ ret = clk_enable(ð->clk);
if (ret)
return ret;
+ ret = ravb_reset(dev);
+ if (ret)
+ goto err;
+
ravb_base_desc_init(eth);
ravb_tx_desc_init(eth);
ravb_rx_desc_init(eth);
ret = ravb_config(dev);
if (ret)
- return ret;
+ goto err;
/* Setting the control will start the AVB-DMAC process. */
writel(CCC_OPC_OPERATION, eth->iobase + RAVB_REG_CCC);
return 0;
+
+err:
+ clk_disable(ð->clk);
+ return ret;
}
static void ravb_stop(struct udevice *dev)
{
+ struct ravb_priv *eth = dev_get_priv(dev);
+
ravb_reset(dev);
+ clk_disable(ð->clk);
}
static int ravb_probe(struct udevice *dev)
iobase = map_physmem(pdata->iobase, 0x1000, MAP_NOCACHE);
eth->iobase = iobase;
+ ret = clk_get_by_index(dev, 0, ð->clk);
+ if (ret < 0)
+ goto err_mdio_alloc;
+
mdiodev = mdio_alloc();
if (!mdiodev) {
ret = -ENOMEM;
.write_hwaddr = ravb_write_hwaddr,
};
+int ravb_ofdata_to_platdata(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ const char *phy_mode;
+ const fdt32_t *cell;
+ int ret = 0;
+
+ pdata->iobase = devfdt_get_addr(dev);
+ pdata->phy_interface = -1;
+ phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
+ NULL);
+ if (phy_mode)
+ pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+ if (pdata->phy_interface == -1) {
+ debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+ return -EINVAL;
+ }
+
+ pdata->max_speed = 1000;
+ cell = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "max-speed", NULL);
+ if (cell)
+ pdata->max_speed = fdt32_to_cpu(*cell);
+
+ sprintf(bb_miiphy_buses[0].name, dev->name);
+
+ return ret;
+}
+
+static const struct udevice_id ravb_ids[] = {
+ { .compatible = "renesas,etheravb-r8a7795" },
+ { .compatible = "renesas,etheravb-r8a7796" },
+ { .compatible = "renesas,etheravb-rcar-gen3" },
+ { }
+};
+
U_BOOT_DRIVER(eth_ravb) = {
.name = "ravb",
.id = UCLASS_ETH,
+ .of_match = ravb_ids,
+ .ofdata_to_platdata = ravb_ofdata_to_platdata,
.probe = ravb_probe,
.remove = ravb_remove,
.ops = &ravb_ops,
menuconfig PCI
bool "PCI support"
- default y if PPC || X86
+ default y if PPC
help
Enable support for PCI (Peripheral Interconnect Bus), a type of bus
used on some devices to allow the CPU to communicate with its
#define SVR_LS2084A 0x870910
#define SVR_LS2048A 0x870920
#define SVR_LS2044A 0x870930
-#define SVR_LS2081A 0x870919
-#define SVR_LS2041A 0x870915
+#define SVR_LS2081A 0x870918
+#define SVR_LS2041A 0x870914
/* LS1021a PCIE space */
#define LS1021_PCIE_SPACE_OFFSET 0x4000000000ULL
int ret;
/*
* Currently valid for the dra7xx_evm board:
- * Set TPS659038 LDO1 to 3.0 V
+ * Set TPS659038 LDO1 to 3.0 V or 1.8V
*/
- val = LDO_VOLT_3V0;
- ret = palmas_i2c_write_u8(TPS65903X_CHIP_P1, LDO1_VOLTAGE, val);
+ ret = palmas_i2c_write_u8(TPS65903X_CHIP_P1, LDO1_VOLTAGE, voltage);
if (ret) {
printf("tps65903x: could not set LDO1 voltage.\n");
return ret;
return pmic_reg_write(dev->parent, adr, ret);
}
+static int palmas_ldo_bypass_enable(struct udevice *dev, bool enabled)
+{
+ int type = dev_get_driver_data(dev_get_parent(dev));
+ struct dm_regulator_uclass_platdata *p;
+ unsigned int adr;
+ int reg;
+
+ if (type == TPS65917) {
+ /* bypass available only on LDO1 and LDO2 */
+ if (dev->driver_data > 2)
+ return -ENOTSUPP;
+ } else if (type == TPS659038) {
+ /* bypass available only on LDO9 */
+ if (dev->driver_data != 9)
+ return -ENOTSUPP;
+ }
+
+ p = dev_get_uclass_platdata(dev);
+ adr = p->ctrl_reg;
+
+ reg = pmic_reg_read(dev->parent, adr);
+ if (reg < 0)
+ return reg;
+
+ if (enabled)
+ reg |= PALMAS_LDO_BYPASS_EN;
+ else
+ reg &= ~PALMAS_LDO_BYPASS_EN;
+
+ return pmic_reg_write(dev->parent, adr, reg);
+}
+
static int palmas_ldo_enable(struct udevice *dev, int op, bool *enable)
{
int ret;
ret = pmic_reg_write(dev->parent, adr, ret);
if (ret)
return ret;
+
+ ret = palmas_ldo_bypass_enable(dev, false);
+ if (ret && (ret != -ENOTSUPP))
+ return ret;
}
return 0;
dev_desc->product[0] = 0;
dev_desc->revision[0] = 0;
dev_desc->removable = false;
-#ifndef CONFIG_BLK
+#if !CONFIG_IS_ENABLED(BLK)
dev_desc->block_read = scsi_read;
dev_desc->block_write = scsi_write;
#endif
-t raw Raw mode, Ctrl-C is processed by U-Boot
-t cooked Cooked mode, Ctrl-C terminates
+config SCIF_CONSOLE
+ bool "Renesas SCIF UART support"
+ depends on SH || ARCH_RMOBILE
+ help
+ Select this to enable Renesas SCIF UART. To operate serial ports
+ on systems with RCar or SH SoCs, say Y to this option. If unsure,
+ say N.
+
config UNIPHIER_SERIAL
bool "Support for UniPhier on-chip UART"
depends on ARCH_UNIPHIER
#include <common.h>
#include <errno.h>
+#include <clk.h>
#include <dm.h>
#include <asm/io.h>
#include <asm/processor.h>
static int sh_serial_ofdata_to_platdata(struct udevice *dev)
{
struct sh_serial_platdata *plat = dev_get_platdata(dev);
+ struct clk sh_serial_clk;
fdt_addr_t addr;
+ int ret;
addr = fdtdec_get_addr(gd->fdt_blob, dev_of_offset(dev), "reg");
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
plat->base = addr;
- plat->clk = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "clock",
- 1);
+
+ ret = clk_get_by_name(dev, "fck", &sh_serial_clk);
+ if (!ret)
+ plat->clk = clk_get_rate(&sh_serial_clk);
+ else
+ plat->clk = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
+ "clock", 1);
+
plat->type = dev_get_driver_data(dev);
return 0;
}
;
while (1) {
+ WATCHDOG_RESET();
+
reg = qspi_read32(priv->flags, ®s->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(priv->flags, ®s->rbdr[0]);
i = 0;
while ((RX_BUFFER_SIZE >= len) && (len > 0)) {
+ WATCHDOG_RESET();
+
rbsr_reg = qspi_read32(priv->flags, ®s->rbsr);
if (rbsr_reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(priv->flags, ®s->rbdr[i]);
;
while (1) {
+ WATCHDOG_RESET();
+
reg = qspi_read32(priv->flags, ®s->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(priv->flags, ®s->rbdr[0]);
static u32 wr_sfaddr;
u32 txbuf;
+ WATCHDOG_RESET();
+
if (dout) {
if (flags & SPI_XFER_BEGIN) {
priv->cur_seqid = *(u8 *)dout;
config X86_TSC_TIMER
bool "x86 Time-Stamp Counter (TSC) timer support"
depends on TIMER && X86
- default y if X86
help
Select this to enable Time-Stamp Counter (TSC) timer for x86.
#include <dm.h>
#include <malloc.h>
#include <timer.h>
+#include <asm/cpu.h>
#include <asm/io.h>
#include <asm/i8254.h>
#include <asm/ibmpc.h>
#include <asm/msr.h>
#include <asm/u-boot-x86.h>
-/* CPU reference clock frequency: in KHz */
-#define FREQ_83 83200
-#define FREQ_100 99840
-#define FREQ_133 133200
-#define FREQ_166 166400
-
#define MAX_NUM_FREQS 8
DECLARE_GLOBAL_DATA_PTR;
static struct freq_desc freq_desc_tables[] = {
/* PNW */
- { 6, 0x27, 0, { 0, 0, 0, 0, 0, FREQ_100, 0, FREQ_83 } },
+ { 6, 0x27, 0, { 0, 0, 0, 0, 0, 99840, 0, 83200 } },
/* CLV+ */
- { 6, 0x35, 0, { 0, FREQ_133, 0, 0, 0, FREQ_100, 0, FREQ_83 } },
- /* TNG */
- { 6, 0x4a, 1, { 0, FREQ_100, FREQ_133, 0, 0, 0, 0, 0 } },
- /* VLV2 */
- { 6, 0x37, 1, { FREQ_83, FREQ_100, FREQ_133, FREQ_166, 0, 0, 0, 0 } },
+ { 6, 0x35, 0, { 0, 133200, 0, 0, 0, 99840, 0, 83200 } },
+ /* TNG - Intel Atom processor Z3400 series */
+ { 6, 0x4a, 1, { 0, 100000, 133300, 0, 0, 0, 0, 0 } },
+ /* VLV2 - Intel Atom processor E3000, Z3600, Z3700 series */
+ { 6, 0x37, 1, { 83300, 100000, 133300, 116700, 80000, 0, 0, 0 } },
+ /* ANN - Intel Atom processor Z3500 series */
+ { 6, 0x5a, 1, { 83300, 100000, 133300, 100000, 0, 0, 0, 0 } },
/* Ivybridge */
{ 6, 0x3a, 2, { 0, 0, 0, 0, 0, 0, 0, 0 } },
- /* ANN */
- { 6, 0x5a, 1, { FREQ_83, FREQ_100, FREQ_133, FREQ_100, 0, 0, 0, 0 } },
};
static int match_cpu(u8 family, u8 model)
(freq_desc_tables[cpu_index].freqs[freq_id])
/*
- * Do MSR calibration only for known/supported CPUs.
+ * TSC on Intel Atom SoCs capable of determining TSC frequency by MSR is
+ * reliable and the frequency is known (provided by HW).
+ *
+ * On these platforms PIT/HPET is generally not available so calibration won't
+ * work at all and there is no other clocksource to act as a watchdog for the
+ * TSC, so we have no other choice than to trust it.
*
- * Returns the calibration value or 0 if MSR calibration failed.
+ * Returns the TSC frequency in MHz or 0 if HW does not provide it.
*/
-static unsigned long __maybe_unused try_msr_calibrate_tsc(void)
+static unsigned long __maybe_unused cpu_mhz_from_msr(void)
{
u32 lo, hi, ratio, freq_id, freq;
unsigned long res;
int cpu_index;
+ if (gd->arch.x86_vendor != X86_VENDOR_INTEL)
+ return 0;
+
cpu_index = match_cpu(gd->arch.x86, gd->arch.x86_model);
if (cpu_index < 0)
return 0;
if (freq_desc_tables[cpu_index].msr_plat) {
rdmsr(MSR_PLATFORM_INFO, lo, hi);
- ratio = (lo >> 8) & 0x1f;
+ ratio = (lo >> 8) & 0xff;
} else {
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
ratio = (hi >> 8) & 0x1f;
}
debug("Maximum core-clock to bus-clock ratio: 0x%x\n", ratio);
- if (!ratio)
- goto fail;
-
if (freq_desc_tables[cpu_index].msr_plat == 2) {
/* TODO: Figure out how best to deal with this */
- freq = FREQ_100;
+ freq = 100000;
debug("Using frequency: %u KHz\n", freq);
} else {
/* Get FSB FREQ ID */
debug("Resolved frequency ID: %u, frequency: %u KHz\n",
freq_id, freq);
}
- if (!freq)
- goto fail;
/* TSC frequency = maximum resolved freq * maximum resolved bus ratio */
res = freq * ratio / 1000;
debug("TSC runs at %lu MHz\n", res);
return res;
-
-fail:
- debug("Fast TSC calibration using MSR failed\n");
- return 0;
}
/*
if (!uc_priv->clock_rate) {
unsigned long fast_calibrate;
- fast_calibrate = try_msr_calibrate_tsc();
+ fast_calibrate = cpu_mhz_from_msr();
if (!fast_calibrate) {
fast_calibrate = quick_pit_calibrate();
if (!fast_calibrate)
#ifdef CONFIG_ARM64
case SVR_LS2080A:
case SVR_LS2085A:
+ /* fallthrough */
+ case SVR_LS2088A:
+ /* fallthrough */
+ case SVR_LS2081A:
case SVR_LS1046A:
case SVR_LS1012A:
return IS_SVR_REV(svr, 1, 0);
* devices it finds.
*
* @ahci_dev: AHCI parent device
+ * @base: Base address of AHCI port
* @return 0 if OK, -ve on error
*/
-int ahci_probe_scsi(struct udevice *ahci_dev);
+int ahci_probe_scsi(struct udevice *ahci_dev, ulong base);
+
+/**
+ * ahci_probe_scsi_pci() - probe and scan the attached SCSI bus on PCI
+ *
+ * Note that the SCSI device will itself bind block devices for any storage
+ * devices it finds.
+ *
+ * @ahci_dev: AHCI parent device
+ * @return 0 if OK, -ve on error
+ */
+int ahci_probe_scsi_pci(struct udevice *ahci_dev);
#endif
char vendor[40+1]; /* IDE model, SCSI Vendor */
char product[20+1]; /* IDE Serial no, SCSI product */
char revision[8+1]; /* firmware revision */
-#ifdef CONFIG_BLK
+#if CONFIG_IS_ENABLED(BLK)
/*
* For now we have a few functions which take struct blk_desc as a
* parameter. This field allows them to look up the associated
#endif
-#ifdef CONFIG_BLK
+#if CONFIG_IS_ENABLED(BLK)
struct udevice;
/* Operations on block devices */
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF0 1
#define CONFIG_SYS_MEMTEST_START (MIGO_R_SDRAM_BASE)
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* SCIF */
-#define CONFIG_SCIF_CONSOLE
/* FLASH */
#define CONFIG_SPI
#define CONFIG_SYS_BAUDRATE_TABLE { 38400 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_SCIF_A 1 /* SH7723 has SCIF and SCIFA */
#define CONFIG_CONS_SCIF5 1
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_SCIF 1
#define CONFIG_CONS_SCIF4 1
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE
#define CONFIG_CONS_SCIF1
#define SCIF0_BASE 0xe6c40000
#define SCIF1_BASE 0xe6c50000
"stdout=serial,vidconsole\0" \
"stderr=serial,vidconsole\0"
-#define CONFIG_SCSI_DEV_LIST \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}
-
/* Environment configuration */
#define CONFIG_ENV_SECT_SIZE 0x1000
#define CONFIG_ENV_OFFSET 0x006ff000
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* SCIF */
-#define CONFIG_SCIF_CONSOLE
#define CONFIG_CONS_SCIF0
#define CONFIG_SYS_MEMTEST_START (RCAR_GEN2_SDRAM_BASE)
"stdout=serial\0" \
"stderr=serial\0"
-#define CONFIG_SCSI_DEV_LIST \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}
-
#define VIDEO_IO_OFFSET 0
#define CONFIG_X86EMU_RAW_IO
"stdout=serial,vga\0" \
"stderr=serial,vga\0"
-#define CONFIG_SCSI_DEV_LIST \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
-
/* Environment configuration */
#define CONFIG_ENV_SECT_SIZE 0x1000
#define CONFIG_ENV_OFFSET 0x5ff000
"stdout=serial,vidconsole\0" \
"stderr=serial,vidconsole\0"
-#define CONFIG_SCSI_DEV_LIST \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
-
/* Environment configuration */
#define CONFIG_ENV_SECT_SIZE 0x1000
#define CONFIG_ENV_OFFSET 0
"stdout=serial\0" \
"stderr=serial\0"
-#define CONFIG_SCSI_DEV_LIST \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}
-
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_SCIF 1
#define CONFIG_CONS_SCIF0 1
#undef CONFIG_TPM_TIS_BASE_ADDRESS
#undef CONFIG_SCSI_AHCI
-#undef CONFIG_INTEL_ICH6_GPIO
#undef CONFIG_USB_EHCI_PCI
#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \
#undef CONFIG_SHOW_BOOT_PROGRESS
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF0 1
#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
#define RCAR_GEN2_UBOOT_SDRAM_SIZE 0x20000000
/* SCIF */
-#define CONFIG_SCIF_CONSOLE
/* FLASH */
#define CONFIG_SPI
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* SCIF */
-#define CONFIG_SCIF_CONSOLE
/* FLASH */
#define CONFIG_SPI
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE
#define CONFIG_CONS_SCIF4
#define CONFIG_SYS_MEMTEST_START (KZM_SDRAM_BASE)
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* SCIF */
-#define CONFIG_SCIF_CONSOLE
/* SPI */
#define CONFIG_SPI
#endif
#define CONFIG_CMDLINE_TAG
-#define CONFIG_CMDLINE_EDITING
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LAYERSCAPE_NS_ACCESS
#define CONFIG_FSL_DEVICE_DISABLE
+#include <config_distro_defaults.h>
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
#ifdef CONFIG_LPUART
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
"initrd_high=0xffffffff\0" \
- "fdt_high=0xffffffff\0"
+ "fdt_high=0xffffffff\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "ramdisk_addr_r=0xa0000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ BOOTENV \
+ "boot_scripts=ls1021atwr_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm32.itb; " \
+ "bootm $load_addr#ls1021atwr\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
+ "nor_bootcmd=echo Trying load from nor..;" \
+ "cp.b $kernel_addr $load_addr " \
+ "$kernel_size && bootm $load_addr#$board\0"
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
"initrd_high=0xffffffff\0" \
- "fdt_high=0xffffffff\0"
+ "fdt_high=0xffffffff\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "ramdisk_addr_r=0xa0000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ BOOTENV \
+ "boot_scripts=ls1021atwr_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm32.itb; " \
+ "bootm $load_addr#ls1021atwr\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
+ "nor_bootcmd=echo Trying load from nor..;" \
+ "cp.b $kernel_addr $load_addr " \
+ "$kernel_size && bootm $load_addr#$board\0"
#endif
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run qspi_bootcmd;"
+#else
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run nor_bootcmd;"
+#endif
+
+#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0"
+
/*
* Miscellaneous configurable options
*/
"5m(kernel),1m(dtb),9m(file_system)"
#endif
+#include <config_distro_defaults.h>
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
+#endif
+
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "loadaddr=0x80100000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x61100000\0" \
- "kernel_load=0xa0000000\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "console=ttyS0,115200\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0"
+ "console=ttyS0,115200\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ BOOTENV \
+ "boot_scripts=ls1043ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1043ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "bootm $load_addr#ls1043ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
+ "nor_bootcmd=echo Trying load from nor..;" \
+ "cp.b $kernel_addr $load_addr " \
+ "$kernel_size && bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run qspi_bootcmd;"
+#else
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run nor_bootcmd;"
+#endif
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0500 " \
MTDPARTS_DEFAULT
-
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND "sf probe && sf read $kernel_load " \
- "e0000 f00000 && bootm $kernel_load"
-#else
-#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
- "$kernel_size && bootm $kernel_load"
-#endif
#endif
/* Monitor Command Prompt */
#define CONFIG_SYS_LONGHELP
#ifndef SPL_NO_MISC
+#ifndef CONFIG_CMDLINE_EDITING
#define CONFIG_CMDLINE_EDITING 1
#endif
+#endif
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MAXARGS 64 /* max command args */
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
+#include <config_distro_defaults.h>
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
+#endif
+
#ifndef SPL_NO_MISC
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "loadaddr=0x80100000\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "ramdisk_addr_r=0xa0000000\0" \
"kernel_start=0x1000000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
"console=ttyS0,115200\0" \
- MTDPARTS_DEFAULT "\0"
+ MTDPARTS_DEFAULT "\0" \
+ BOOTENV \
+ "boot_scripts=ls1046ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1046ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "bootm $load_addr#ls1046ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_start $kernel_size && bootm $load_addr#$board\0"
+
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0500 " \
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
#define CONFIG_SYS_LONGHELP
-#ifndef SPL_NO_MISC
-#define CONFIG_CMDLINE_EDITING 1
-#endif
-
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MAXARGS 64 /* max command args */
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
-#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#endif
#define CONFIG_CMDLINE_TAG
+#undef CONFIG_BOOTCOMMAND
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_BOOTCOMMAND "sf probe && sf read $kernel_load " \
"e0000 f00000 && bootm $kernel_load"
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
-#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#endif
#endif
#endif
#ifndef SPL_NO_MISC
-#define CONFIG_BOOTCOMMAND "sf probe 0:0;sf read $kernel_load" \
- "$kernel_start $kernel_size;" \
- "bootm $kernel_load"
-
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run qspi_bootcmd;"
#define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \
"15m(u-boot),48m(kernel.itb);" \
"7e800000.flash:16m(nand_uboot)," \
#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 * 1024)
#define CONFIG_SYS_NAND_U_BOOT_SIZE (640 * 1024)
#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET 0x200000
+#define CONFIG_ENV_OFFSET 0x300000
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_SIZE 0x20000
#endif
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
+#ifdef CONFIG_QSPI_BOOT
+#define MC_INIT_CMD \
+ "mcinitcmd=env exists secureboot && " \
+ "esbc_validate 0x20700000 && " \
+ "esbc_validate 0x20740000;" \
+ "fsl_mc start mc 0x20a00000 0x20e00000 \0"
+#else
+#define MC_INIT_CMD \
+ "mcinitcmd=env exists secureboot && " \
+ "esbc_validate 0x580700000 && " \
+ "esbc_validate 0x580740000; " \
+ "fsl_mc start mc 0x580a00000 0x580e00000 \0"
+#endif
+
/* Initial environment variables */
#undef CONFIG_EXTRA_ENV_SETTINGS
-#ifdef CONFIG_SECURE_BOOT
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "scriptaddr=0x80800000\0" \
- "kernel_addr_r=0x81000000\0" \
- "pxefile_addr_r=0x81000000\0" \
- "fdt_addr_r=0x88000000\0" \
- "ramdisk_addr_r=0x89000000\0" \
- "loadaddr=0x80100000\0" \
- "kernel_addr=0x100000\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x581000000\0" \
- "kernel_load=0xa0000000\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "kernel_start=0x1000000\0" \
+ "kernelheader_start=0x800000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernelheader_addr=0x580800000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "kernelheader_size=0x40000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "mcmemsize=0x40000000\0" \
- "fdtfile=fsl-ls2080a-rdb.dtb\0" \
- "mcinitcmd=esbc_validate 0x580700000;" \
- "esbc_validate 0x580740000;" \
- "fsl_mc start mc 0x580a00000" \
- " 0x580e00000 \0" \
- BOOTENV
-#else
+ "console=ttyAMA0,38400n8\0" \
+ MC_INIT_CMD \
+ BOOTENV \
+ "boot_scripts=ls2088ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls2088ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "bootm $load_addr#ls2088ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_start $kernel_size ; env exists secureboot &&" \
+ "sf read $kernelheader_addr_r $kernelheader_start " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ " bootm $load_addr#$board\0" \
+ "nor_bootcmd=echo Trying load from nor..;" \
+ "cp.b $kernel_addr $load_addr " \
+ "$kernel_size ; env exists secureboot && " \
+ "cp.b $kernelheader_addr $kernelheader_addr_r " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ "bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "scriptaddr=0x80800000\0" \
- "kernel_addr_r=0x81000000\0" \
- "pxefile_addr_r=0x81000000\0" \
- "fdt_addr_r=0x88000000\0" \
- "ramdisk_addr_r=0x89000000\0" \
- "loadaddr=0x80100000\0" \
- "kernel_addr=0x100000\0" \
- "ramdisk_size=0x2000000\0" \
- "fdt_high=0xa0000000\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x21000000\0" \
- "mcmemsize=0x40000000\0" \
- "mcinitcmd=fsl_mc start mc 0x20a00000" \
- " 0x20e00000 \0" \
- BOOTENV
+/* Try to boot an on-QSPI kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND \
+ "env exists mcinitcmd && env exists secureboot "\
+ "&& esbc_validate 0x20780000; " \
+ "env exists mcinitcmd && " \
+ "fsl_mc lazyapply dpl 0x20d00000; " \
+ "run distro_bootcmd;run qspi_bootcmd; " \
+ "env exists secureboot && esbc_halt; "
#else
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "scriptaddr=0x80800000\0" \
- "kernel_addr_r=0x81000000\0" \
- "pxefile_addr_r=0x81000000\0" \
- "fdt_addr_r=0x88000000\0" \
- "ramdisk_addr_r=0x89000000\0" \
- "loadaddr=0x80100000\0" \
- "kernel_addr=0x100000\0" \
- "ramdisk_addr=0x800000\0" \
- "ramdisk_size=0x2000000\0" \
- "fdt_high=0xa0000000\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x581000000\0" \
- "kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0" \
- "mcmemsize=0x40000000\0" \
- "fdtfile=fsl-ls2080a-rdb.dtb\0" \
- "mcinitcmd=fsl_mc start mc 0x580a00000" \
- " 0x580e00000 \0" \
- BOOTENV
-#endif
+/* Try to boot an on-NOR kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND \
+ "env exists mcinitcmd && env exists secureboot "\
+ "&& esbc_validate 0x580780000; env exists mcinitcmd "\
+ "&& fsl_mc lazyapply dpl 0x580d00000;" \
+ "run distro_bootcmd;run nor_bootcmd; " \
+ "env exists secureboot && esbc_halt; "
#endif
-
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0600 " \
"ramdisk_size=0x2000000 default_hugepagesz=2m" \
" hugepagesz=2m hugepages=256"
-#undef CONFIG_BOOTCOMMAND
-#ifdef CONFIG_QSPI_BOOT
-/* Try to boot an on-QSPI kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x20d00000" \
- " && bootm $kernel_start" \
- " || run distro_bootcmd"
-#else
-/* Try to boot an on-NOR kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580d00000" \
- " && cp.b $kernel_start $kernel_load $kernel_size" \
- " && bootm $kernel_load" \
- " || run distro_bootcmd"
-#endif
-
/* MAC/PHY configuration */
#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_PHYLIB_10G
"stderr=vidconsole,serial\0" \
"usb_pgood_delay=40\0"
-#define CONFIG_SCSI_DEV_LIST \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}
-
#define VIDEO_IO_OFFSET 0
#define CONFIG_X86EMU_RAW_IO
#define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */
/* UART */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF0 1
#endif /* __MPR2_H */
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF0 1
#define CONFIG_SYS_MEMTEST_START MS7720SE_SDRAM_BASE
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF0 1
#define CONFIG_SYS_MEMTEST_START (MS7722SE_SDRAM_BASE)
/*
* Command line configuration.
*/
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF1 1
#define CONFIG_BOOTARGS "console=ttySC0,38400"
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (1024u * 1024 * 1024)
/* SCIF */
-#define CONFIG_SCIF_CONSOLE
/* FLASH */
#define CONFIG_SPI
* ATA/SATA support for QEMU x86 targets
* - Only legacy IDE controller is supported for QEMU '-M pc' target
* - AHCI controller is supported for QEMU '-M q35' target
- *
- * Default configuraion is to support the QEMU default x86 target
- * Undefine CONFIG_IDE to support q35 target
*/
-#ifdef CONFIG_IDE
#define CONFIG_SYS_IDE_MAXBUS 2
#define CONFIG_SYS_IDE_MAXDEVICE 4
#define CONFIG_SYS_ATA_BASE_ADDR 0
#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
#define CONFIG_ATAPI
-#undef CONFIG_SCSI_AHCI
-#else
-#define CONFIG_SCSI_DEV_LIST \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_AHCI}
-#endif
-
-/* GPIO is not supported */
-#undef CONFIG_INTEL_ICH6_GPIO
-
/* SPI is not supported */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_SCIF 1
#define CONFIG_CONS_SCIF3 1
#define CONFIG_CMD_SH_ZIMAGEBOOT
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF1 1
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_PCI
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF0 1
#define CONFIG_BOOTARGS "console=ttySC0,115200"
#define CONFIG_SH_GPIO_PFC
/* console */
-
+#define CONFIG_SYS_CBSIZE 2048
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE 512
+#define CONFIG_SYS_MAXARGS 64
#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400 }
/* MEMORY */
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF0 1
#define CONFIG_SYS_MEMTEST_START RSK7203_SDRAM_BASE
#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */
/* Serial */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF3 1
/* Memory */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
/* Serial */
-#define CONFIG_SCIF_CONSOLE
#define CONFIG_CONS_SCIF7
/* Memory */
#include "rcar-gen3-common.h"
/* SCIF */
-#define CONFIG_SCIF_CONSOLE
#define CONFIG_CONS_SCIF2
#define CONFIG_CONS_INDEX 2
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_S3D4_CLK_FREQ
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF2 1
#define CONFIG_SYS_MEMTEST_START (SH7752EVB_SDRAM_BASE)
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF2 1
#define CONFIG_SYS_MEMTEST_START (SH7753EVB_SDRAM_BASE)
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF2 1
#define CONFIG_SYS_MEMTEST_START (SH7757LCR_SDRAM_BASE)
#undef CONFIG_SHOW_BOOT_PROGRESS
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF2 1
#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF1 1
#define CONFIG_SCIF_EXT_CLOCK 1
#define CONFIG_SYS_BAUDRATE_TABLE { 9600,14400,19200,38400,57600,115200 }
/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF0 1
/* memory */
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* SCIF */
-#define CONFIG_SCIF_CONSOLE
/* FLASH */
#define CONFIG_SPI
#define CONFIG_MISC_INIT_R
-#define CONFIG_SCSI_DEV_LIST \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_AHCI}
-
#define VIDEO_IO_OFFSET 0
#define CONFIG_X86EMU_RAW_IO
"stdout=serial,vidconsole\0" \
"stderr=serial,vidconsole\0"
-#define CONFIG_SCSI_DEV_LIST \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}
-
#define VIDEO_IO_OFFSET 0
#define CONFIG_X86EMU_RAW_IO
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* SCIF */
-#define CONFIG_SCIF_CONSOLE
#define CONFIG_SCIF_A
/* SPI */
--- /dev/null
+/*
+ * include/configs/ulcb.h
+ * This file is ULCB board configuration.
+ *
+ * Copyright (C) 2017 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ULCB_H
+#define __ULCB_H
+
+#undef DEBUG
+
+#define CONFIG_RCAR_BOARD_STRING "ULCB"
+
+#include "rcar-gen3-common.h"
+
+/* M3 ULCB has 2 banks, each with 1 GiB of RAM */
+#if defined(CONFIG_R8A7796)
+#undef PHYS_SDRAM_1_SIZE
+#undef PHYS_SDRAM_2_SIZE
+#define PHYS_SDRAM_1_SIZE (0x40000000u - DRAM_RSV_SIZE)
+#define PHYS_SDRAM_2_SIZE 0x40000000u
+#endif
+
+/* SCIF */
+#define CONFIG_CONS_SCIF2
+#define CONFIG_CONS_INDEX 2
+#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_S3D4_CLK_FREQ
+
+/* [A] Hyper Flash */
+/* use to RPC(SPI Multi I/O Bus Controller) */
+
+/* Ethernet RAVB */
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_MICREL
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+
+/* Board Clock */
+/* XTAL_CLK : 33.33MHz */
+#define RCAR_XTAL_CLK 33333333u
+#define CONFIG_SYS_CLK_FREQ RCAR_XTAL_CLK
+/* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */
+/* CPclk 16.66MHz, S3D2 133.33MHz , S3D4 66.66MHz */
+#define CONFIG_CP_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
+#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 192 / 2)
+#define CONFIG_S3D2_CLK_FREQ (266666666u/2)
+#define CONFIG_S3D4_CLK_FREQ (266666666u/4)
+
+/* Generic Timer Definitions (use in assembler source) */
+#define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */
+
+/* Generic Interrupt Controller Definitions */
+#define CONFIG_GICV2
+#define GICD_BASE 0xF1010000
+#define GICC_BASE 0xF1020000
+
+/* CPLD SPI */
+#define CONFIG_CMD_SPI
+#define CONFIG_SOFT_SPI
+#define SPI_DELAY udelay(0)
+#define SPI_SDA(val) ulcb_softspi_sda(val)
+#define SPI_SCL(val) ulcb_softspi_scl(val)
+#define SPI_READ ulcb_softspi_read()
+#ifndef __ASSEMBLY__
+void ulcb_softspi_sda(int);
+void ulcb_softspi_scl(int);
+unsigned char ulcb_softspi_read(void);
+#endif
+
+/* i2c */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SH
+#define CONFIG_SYS_I2C_SLAVE 0x60
+#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 1
+#define CONFIG_SYS_I2C_SH_SPEED0 400000
+#define CONFIG_SH_I2C_DATA_HIGH 4
+#define CONFIG_SH_I2C_DATA_LOW 5
+#define CONFIG_SH_I2C_CLOCK 10000000
+
+#define CONFIG_SYS_I2C_POWERIC_ADDR 0x30
+
+/* USB */
+#ifdef CONFIG_R8A7795
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+#else
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
+
+/* SDHI */
+#define CONFIG_SH_SDHI_FREQ 200000000
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 1
+#define CONFIG_SYS_MMC_ENV_PART 2
+
+/* Module stop status bits */
+/* MFIS, SCIF1 */
+#define CONFIG_SMSTP2_ENA 0x00002040
+/* SCIF2 */
+#define CONFIG_SMSTP3_ENA 0x00000400
+/* INTC-AP, IRQC */
+#define CONFIG_SMSTP4_ENA 0x00000180
+
+#endif /* __ULCB_H */
#define CONFIG_X86_REFCODE_ADDR 0xffea0000
#define CONFIG_X86_REFCODE_RUN_ADDR 0
-#define CONFIG_SCSI_DEV_LIST \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_NM10_AHCI}, \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE}, \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6}, \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}, \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_AHCI}, \
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_AHCI}
-
#define CONFIG_PCI_MEM_BUS 0xe0000000
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x10000000
#define CONFIG_SUPPORT_VFAT
-/* x86 GPIOs are accessed through a PCI device */
-#define CONFIG_INTEL_ICH6_GPIO
-
/*-----------------------------------------------------------------------
* Command line configuration.
*/
--- /dev/null
+/*
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R8A7795_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R8A7795_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a7795 CPG Core Clocks */
+#define R8A7795_CLK_Z 0
+#define R8A7795_CLK_Z2 1
+#define R8A7795_CLK_ZR 2
+#define R8A7795_CLK_ZG 3
+#define R8A7795_CLK_ZTR 4
+#define R8A7795_CLK_ZTRD2 5
+#define R8A7795_CLK_ZT 6
+#define R8A7795_CLK_ZX 7
+#define R8A7795_CLK_S0D1 8
+#define R8A7795_CLK_S0D4 9
+#define R8A7795_CLK_S1D1 10
+#define R8A7795_CLK_S1D2 11
+#define R8A7795_CLK_S1D4 12
+#define R8A7795_CLK_S2D1 13
+#define R8A7795_CLK_S2D2 14
+#define R8A7795_CLK_S2D4 15
+#define R8A7795_CLK_S3D1 16
+#define R8A7795_CLK_S3D2 17
+#define R8A7795_CLK_S3D4 18
+#define R8A7795_CLK_LB 19
+#define R8A7795_CLK_CL 20
+#define R8A7795_CLK_ZB3 21
+#define R8A7795_CLK_ZB3D2 22
+#define R8A7795_CLK_CR 23
+#define R8A7795_CLK_CRD2 24
+#define R8A7795_CLK_SD0H 25
+#define R8A7795_CLK_SD0 26
+#define R8A7795_CLK_SD1H 27
+#define R8A7795_CLK_SD1 28
+#define R8A7795_CLK_SD2H 29
+#define R8A7795_CLK_SD2 30
+#define R8A7795_CLK_SD3H 31
+#define R8A7795_CLK_SD3 32
+#define R8A7795_CLK_SSP2 33
+#define R8A7795_CLK_SSP1 34
+#define R8A7795_CLK_SSPRS 35
+#define R8A7795_CLK_RPC 36
+#define R8A7795_CLK_RPCD2 37
+#define R8A7795_CLK_MSO 38
+#define R8A7795_CLK_CANFD 39
+#define R8A7795_CLK_HDMI 40
+#define R8A7795_CLK_CSI0 41
+#define R8A7795_CLK_CSIREF 42
+#define R8A7795_CLK_CP 43
+#define R8A7795_CLK_CPEX 44
+#define R8A7795_CLK_R 45
+#define R8A7795_CLK_OSC 46
+
+/* r8a7795 ES2.0 CPG Core Clocks */
+#define R8A7795_CLK_S0D2 47
+#define R8A7795_CLK_S0D3 48
+#define R8A7795_CLK_S0D6 49
+#define R8A7795_CLK_S0D8 50
+#define R8A7795_CLK_S0D12 51
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7795_CPG_MSSR_H__ */
--- /dev/null
+/*
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a7796 CPG Core Clocks */
+#define R8A7796_CLK_Z 0
+#define R8A7796_CLK_Z2 1
+#define R8A7796_CLK_ZR 2
+#define R8A7796_CLK_ZG 3
+#define R8A7796_CLK_ZTR 4
+#define R8A7796_CLK_ZTRD2 5
+#define R8A7796_CLK_ZT 6
+#define R8A7796_CLK_ZX 7
+#define R8A7796_CLK_S0D1 8
+#define R8A7796_CLK_S0D2 9
+#define R8A7796_CLK_S0D3 10
+#define R8A7796_CLK_S0D4 11
+#define R8A7796_CLK_S0D6 12
+#define R8A7796_CLK_S0D8 13
+#define R8A7796_CLK_S0D12 14
+#define R8A7796_CLK_S1D1 15
+#define R8A7796_CLK_S1D2 16
+#define R8A7796_CLK_S1D4 17
+#define R8A7796_CLK_S2D1 18
+#define R8A7796_CLK_S2D2 19
+#define R8A7796_CLK_S2D4 20
+#define R8A7796_CLK_S3D1 21
+#define R8A7796_CLK_S3D2 22
+#define R8A7796_CLK_S3D4 23
+#define R8A7796_CLK_LB 24
+#define R8A7796_CLK_CL 25
+#define R8A7796_CLK_ZB3 26
+#define R8A7796_CLK_ZB3D2 27
+#define R8A7796_CLK_ZB3D4 28
+#define R8A7796_CLK_CR 29
+#define R8A7796_CLK_CRD2 30
+#define R8A7796_CLK_SD0H 31
+#define R8A7796_CLK_SD0 32
+#define R8A7796_CLK_SD1H 33
+#define R8A7796_CLK_SD1 34
+#define R8A7796_CLK_SD2H 35
+#define R8A7796_CLK_SD2 36
+#define R8A7796_CLK_SD3H 37
+#define R8A7796_CLK_SD3 38
+#define R8A7796_CLK_SSP2 39
+#define R8A7796_CLK_SSP1 40
+#define R8A7796_CLK_SSPRS 41
+#define R8A7796_CLK_RPC 42
+#define R8A7796_CLK_RPCD2 43
+#define R8A7796_CLK_MSO 44
+#define R8A7796_CLK_CANFD 45
+#define R8A7796_CLK_HDMI 46
+#define R8A7796_CLK_CSI0 47
+#define R8A7796_CLK_CSIREF 48
+#define R8A7796_CLK_CP 49
+#define R8A7796_CLK_CPEX 50
+#define R8A7796_CLK_R 51
+#define R8A7796_CLK_OSC 52
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__ */
--- /dev/null
+/*
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __DT_BINDINGS_CLOCK_RENESAS_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_RENESAS_CPG_MSSR_H__
+
+#define CPG_CORE 0 /* Core Clock */
+#define CPG_MOD 1 /* Module Clock */
+
+#endif /* __DT_BINDINGS_CLOCK_RENESAS_CPG_MSSR_H__ */
--- /dev/null
+/*
+ * Copyright (C) 2016 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7795_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7795_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A7795_PD_CA57_CPU0 0
+#define R8A7795_PD_CA57_CPU1 1
+#define R8A7795_PD_CA57_CPU2 2
+#define R8A7795_PD_CA57_CPU3 3
+#define R8A7795_PD_CA53_CPU0 5
+#define R8A7795_PD_CA53_CPU1 6
+#define R8A7795_PD_CA53_CPU2 7
+#define R8A7795_PD_CA53_CPU3 8
+#define R8A7795_PD_A3VP 9
+#define R8A7795_PD_CA57_SCU 12
+#define R8A7795_PD_CR7 13
+#define R8A7795_PD_A3VC 14
+#define R8A7795_PD_3DG_A 17
+#define R8A7795_PD_3DG_B 18
+#define R8A7795_PD_3DG_C 19
+#define R8A7795_PD_3DG_D 20
+#define R8A7795_PD_CA53_SCU 21
+#define R8A7795_PD_3DG_E 22
+#define R8A7795_PD_A3IR 24
+#define R8A7795_PD_A2VC0 25 /* ES1.x only */
+#define R8A7795_PD_A2VC1 26
+
+/* Always-on power area */
+#define R8A7795_PD_ALWAYS_ON 32
+
+#endif /* __DT_BINDINGS_POWER_R8A7795_SYSC_H__ */
--- /dev/null
+/*
+ * Copyright (C) 2016 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7796_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7796_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A7796_PD_CA57_CPU0 0
+#define R8A7796_PD_CA57_CPU1 1
+#define R8A7796_PD_CA53_CPU0 5
+#define R8A7796_PD_CA53_CPU1 6
+#define R8A7796_PD_CA53_CPU2 7
+#define R8A7796_PD_CA53_CPU3 8
+#define R8A7796_PD_CA57_SCU 12
+#define R8A7796_PD_CR7 13
+#define R8A7796_PD_A3VC 14
+#define R8A7796_PD_3DG_A 17
+#define R8A7796_PD_3DG_B 18
+#define R8A7796_PD_CA53_SCU 21
+#define R8A7796_PD_A3IR 24
+#define R8A7796_PD_A2VC0 25
+#define R8A7796_PD_A2VC1 26
+
+/* Always-on power area */
+#define R8A7796_PD_ALWAYS_ON 32
+
+#endif /* __DT_BINDINGS_POWER_R8A7796_SYSC_H__ */
/* forward decl. */
struct mmc;
-#ifdef CONFIG_DM_MMC_OPS
+#if CONFIG_IS_ENABLED(DM_MMC_OPS)
struct dm_mmc_ops {
/**
* send_cmd() - Send a command to the MMC device
struct mmc_config {
const char *name;
-#ifndef CONFIG_DM_MMC_OPS
+#if !CONFIG_IS_ENABLED(DM_MMC_OPS)
const struct mmc_ops *ops;
#endif
uint host_caps;
* TODO struct mmc should be in mmc_private but it's hard to fix right now
*/
struct mmc {
-#ifndef CONFIG_BLK
+#if !CONFIG_IS_ENABLED(BLK)
struct list_head link;
#endif
const struct mmc_config *cfg; /* provided configuration */
u64 capacity_gp[4];
u64 enh_user_start;
u64 enh_user_size;
-#ifndef CONFIG_BLK
+#if !CONFIG_IS_ENABLED(BLK)
struct blk_desc block_dev;
#endif
char op_cond_pending; /* 1 if we are waiting on an op_cond command */
char init_in_progress; /* 1 if we have done mmc_start_init() */
char preinit; /* start init as early as possible */
int ddr_mode;
-#ifdef CONFIG_DM_MMC
+#if CONFIG_IS_ENABLED(DM_MMC)
struct udevice *dev; /* Device for this MMC controller */
#endif
};
int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf,
enum mmc_hwpart_conf_mode mode);
-#ifndef CONFIG_DM_MMC_OPS
+#if !CONFIG_IS_ENABLED(DM_MMC_OPS)
int mmc_getcd(struct mmc *mmc);
int board_mmc_getcd(struct mmc *mmc);
int mmc_getwp(struct mmc *mmc);
int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr);
int mmc_get_env_dev(void);
-struct pci_device_id;
-
-/**
- * pci_mmc_init() - set up PCI MMC devices
- *
- * This finds all the matching PCI IDs and sets them up as MMC devices.
- *
- * @name: Name to use for devices
- * @mmc_supported: PCI IDs to search for, terminated by {0, 0}
- */
-int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported);
-
/* Set block count limit because of 16 bit register limit on some hardware*/
#ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535
#define PALMAS_LDO_VOLT_MAX 3300000
#define PALMAS_LDO_MODE_MASK 0x1
#define PALMAS_LDO_STATUS_MASK 0x10
+#define PALMAS_LDO_BYPASS_EN 0x40
CONFIG_INI_MAX_NAME
CONFIG_INI_MAX_SECTION
CONFIG_INTEGRITY
-CONFIG_INTEL_ICH6_GPIO
CONFIG_INTERRUPTS
CONFIG_IO
CONFIG_IO64
CONFIG_SCF0403_LCD
CONFIG_SCIF
CONFIG_SCIF_A
-CONFIG_SCIF_CONSOLE
CONFIG_SCIF_EXT_CLOCK
CONFIG_SCIF_USE_EXT_CLK
CONFIG_SCSI_AHCI
projects / platform / kernel / u-boot.git / commitdiff