# SPDX-License-Identifier: GPL-2.0-only
+
# This config refers to the generic KASAN mode.
config HAVE_ARCH_KASAN
bool
config ARCH_DISABLE_KASAN_INLINE
bool
help
- An architecture might not support inline instrumentation.
- When this option is selected, inline and stack instrumentation are
- disabled.
+ Disables both inline and stack instrumentation. Selected by
+ architectures that do not support these instrumentation types.
config CC_HAS_KASAN_GENERIC
def_bool $(cc-option, -fsanitize=kernel-address)
def_bool $(cc-option, -fsanitize=kernel-hwaddress)
# This option is only required for software KASAN modes.
-# Old GCC versions don't have proper support for no_sanitize_address.
+# Old GCC versions do not have proper support for no_sanitize_address.
# See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=89124 for details.
config CC_HAS_WORKING_NOSANITIZE_ADDRESS
def_bool !CC_IS_GCC || GCC_VERSION >= 80300
menuconfig KASAN
- bool "KASAN: runtime memory debugger"
+ bool "KASAN: dynamic memory safety error detector"
depends on (((HAVE_ARCH_KASAN && CC_HAS_KASAN_GENERIC) || \
(HAVE_ARCH_KASAN_SW_TAGS && CC_HAS_KASAN_SW_TAGS)) && \
CC_HAS_WORKING_NOSANITIZE_ADDRESS) || \
depends on (SLUB && SYSFS) || (SLAB && !DEBUG_SLAB)
select STACKDEPOT_ALWAYS_INIT
help
- Enables KASAN (KernelAddressSANitizer) - runtime memory debugger,
- designed to find out-of-bounds accesses and use-after-free bugs.
+ Enables KASAN (Kernel Address Sanitizer) - a dynamic memory safety
+ error detector designed to find out-of-bounds and use-after-free bugs.
+
See Documentation/dev-tools/kasan.rst for details.
+ For better error reports, also enable CONFIG_STACKTRACE.
+
if KASAN
choice
default KASAN_GENERIC
help
KASAN has three modes:
- 1. generic KASAN (similar to userspace ASan,
- x86_64/arm64/xtensa, enabled with CONFIG_KASAN_GENERIC),
- 2. software tag-based KASAN (arm64 only, based on software
- memory tagging (similar to userspace HWASan), enabled with
- CONFIG_KASAN_SW_TAGS), and
- 3. hardware tag-based KASAN (arm64 only, based on hardware
- memory tagging, enabled with CONFIG_KASAN_HW_TAGS).
- All KASAN modes are strictly debugging features.
+ 1. Generic KASAN (supported by many architectures, enabled with
+ CONFIG_KASAN_GENERIC, similar to userspace ASan),
+ 2. Software Tag-Based KASAN (arm64 only, based on software memory
+ tagging, enabled with CONFIG_KASAN_SW_TAGS, similar to userspace
+ HWASan), and
+ 3. Hardware Tag-Based KASAN (arm64 only, based on hardware memory
+ tagging, enabled with CONFIG_KASAN_HW_TAGS).
- For better error reports enable CONFIG_STACKTRACE.
+ See Documentation/dev-tools/kasan.rst for details about each mode.
config KASAN_GENERIC
- bool "Generic mode"
+ bool "Generic KASAN"
depends on HAVE_ARCH_KASAN && CC_HAS_KASAN_GENERIC
depends on CC_HAS_WORKING_NOSANITIZE_ADDRESS
select SLUB_DEBUG if SLUB
select CONSTRUCTORS
help
- Enables generic KASAN mode.
+ Enables Generic KASAN.
- This mode is supported in both GCC and Clang. With GCC it requires
- version 8.3.0 or later. Any supported Clang version is compatible,
- but detection of out-of-bounds accesses for global variables is
- supported only since Clang 11.
+ Requires GCC 8.3.0+ or Clang.
- This mode consumes about 1/8th of available memory at kernel start
- and introduces an overhead of ~x1.5 for the rest of the allocations.
+ Consumes about 1/8th of available memory at kernel start and adds an
+ overhead of ~50% for dynamic allocations.
The performance slowdown is ~x3.
- Currently CONFIG_KASAN_GENERIC doesn't work with CONFIG_DEBUG_SLAB
- (the resulting kernel does not boot).
+ (Incompatible with CONFIG_DEBUG_SLAB: the kernel does not boot.)
config KASAN_SW_TAGS
- bool "Software tag-based mode"
+ bool "Software Tag-Based KASAN"
depends on HAVE_ARCH_KASAN_SW_TAGS && CC_HAS_KASAN_SW_TAGS
depends on CC_HAS_WORKING_NOSANITIZE_ADDRESS
select SLUB_DEBUG if SLUB
select CONSTRUCTORS
help
- Enables software tag-based KASAN mode.
+ Enables Software Tag-Based KASAN.
- This mode require software memory tagging support in the form of
- HWASan-like compiler instrumentation.
+ Requires GCC 11+ or Clang.
- Currently this mode is only implemented for arm64 CPUs and relies on
- Top Byte Ignore. This mode requires Clang.
+ Supported only on arm64 CPUs and relies on Top Byte Ignore.
- This mode consumes about 1/16th of available memory at kernel start
- and introduces an overhead of ~20% for the rest of the allocations.
- This mode may potentially introduce problems relating to pointer
- casting and comparison, as it embeds tags into the top byte of each
- pointer.
+ Consumes about 1/16th of available memory at kernel start and
+ add an overhead of ~20% for dynamic allocations.
- Currently CONFIG_KASAN_SW_TAGS doesn't work with CONFIG_DEBUG_SLAB
- (the resulting kernel does not boot).
+ May potentially introduce problems related to pointer casting and
+ comparison, as it embeds a tag into the top byte of each pointer.
+
+ (Incompatible with CONFIG_DEBUG_SLAB: the kernel does not boot.)
config KASAN_HW_TAGS
- bool "Hardware tag-based mode"
+ bool "Hardware Tag-Based KASAN"
depends on HAVE_ARCH_KASAN_HW_TAGS
depends on SLUB
help
- Enables hardware tag-based KASAN mode.
+ Enables Hardware Tag-Based KASAN.
+
+ Requires GCC 10+ or Clang 12+.
- This mode requires hardware memory tagging support, and can be used
- by any architecture that provides it.
+ Supported only on arm64 CPUs starting from ARMv8.5 and relies on
+ Memory Tagging Extension and Top Byte Ignore.
- Currently this mode is only implemented for arm64 CPUs starting from
- ARMv8.5 and relies on Memory Tagging Extension and Top Byte Ignore.
+ Consumes about 1/32nd of available memory.
+
+ May potentially introduce problems related to pointer casting and
+ comparison, as it embeds a tag into the top byte of each pointer.
endchoice
config KASAN_OUTLINE
bool "Outline instrumentation"
help
- Before every memory access compiler insert function call
- __asan_load*/__asan_store*. These functions performs check
- of shadow memory. This is slower than inline instrumentation,
- however it doesn't bloat size of kernel's .text section so
- much as inline does.
+ Makes the compiler insert function calls that check whether the memory
+ is accessible before each memory access. Slower than KASAN_INLINE, but
+ does not bloat the size of the kernel's .text section so much.
config KASAN_INLINE
bool "Inline instrumentation"
depends on !ARCH_DISABLE_KASAN_INLINE
help
- Compiler directly inserts code checking shadow memory before
- memory accesses. This is faster than outline (in some workloads
- it gives about x2 boost over outline instrumentation), but
- make kernel's .text size much bigger.
+ Makes the compiler directly insert memory accessibility checks before
+ each memory access. Faster than KASAN_OUTLINE (gives ~x2 boost for
+ some workloads), but makes the kernel's .text size much bigger.
endchoice
config KASAN_STACK
- bool "Enable stack instrumentation (unsafe)" if CC_IS_CLANG && !COMPILE_TEST
+ bool "Stack instrumentation (unsafe)" if CC_IS_CLANG && !COMPILE_TEST
depends on KASAN_GENERIC || KASAN_SW_TAGS
depends on !ARCH_DISABLE_KASAN_INLINE
default y if CC_IS_GCC
help
- The LLVM stack address sanitizer has a know problem that
- causes excessive stack usage in a lot of functions, see
- https://bugs.llvm.org/show_bug.cgi?id=38809
- Disabling asan-stack makes it safe to run kernels build
- with clang-8 with KASAN enabled, though it loses some of
- the functionality.
- This feature is always disabled when compile-testing with clang
- to avoid cluttering the output in stack overflow warnings,
- but clang users can still enable it for builds without
- CONFIG_COMPILE_TEST. On gcc it is assumed to always be safe
- to use and enabled by default.
- If the architecture disables inline instrumentation, stack
- instrumentation is also disabled as it adds inline-style
- instrumentation that is run unconditionally.
+ Disables stack instrumentation and thus KASAN's ability to detect
+ out-of-bounds bugs in stack variables.
+
+ With Clang, stack instrumentation has a problem that causes excessive
+ stack usage, see https://bugs.llvm.org/show_bug.cgi?id=38809. Thus,
+ with Clang, this option is deemed unsafe.
+
+ This option is always disabled when compile-testing with Clang to
+ avoid cluttering the log with stack overflow warnings.
+
+ With GCC, enabling stack instrumentation is assumed to be safe.
+
+ If the architecture disables inline instrumentation via
+ ARCH_DISABLE_KASAN_INLINE, stack instrumentation gets disabled
+ as well, as it adds inline-style instrumentation that is run
+ unconditionally.
config KASAN_TAGS_IDENTIFY
- bool "Enable memory corruption identification"
+ bool "Memory corruption type identification"
depends on KASAN_SW_TAGS || KASAN_HW_TAGS
help
- This option enables best-effort identification of bug type
- (use-after-free or out-of-bounds) at the cost of increased
- memory consumption.
+ Enables best-effort identification of the bug types (use-after-free
+ or out-of-bounds) at the cost of increased memory consumption.
+ Only applicable for the tag-based KASAN modes.
config KASAN_VMALLOC
bool "Check accesses to vmalloc allocations"
depends on HAVE_ARCH_KASAN_VMALLOC
help
- This mode makes KASAN check accesses to vmalloc allocations for
- validity.
+ Makes KASAN check the validity of accesses to vmalloc allocations.
- With software KASAN modes, checking is done for all types of vmalloc
- allocations. Enabling this option leads to higher memory usage.
+ With software KASAN modes, all types vmalloc allocations are
+ checked. Enabling this option leads to higher memory usage.
- With hardware tag-based KASAN, only VM_ALLOC mappings are checked.
- There is no additional memory usage.
+ With Hardware Tag-Based KASAN, only non-executable VM_ALLOC mappings
+ are checked. There is no additional memory usage.
config KASAN_KUNIT_TEST
tristate "KUnit-compatible tests of KASAN bug detection capabilities" if !KUNIT_ALL_TESTS
depends on KASAN && KUNIT
default KUNIT_ALL_TESTS
help
- This is a KUnit test suite doing various nasty things like
- out of bounds and use after free accesses. It is useful for testing
- kernel debugging features like KASAN.
+ A KUnit-based KASAN test suite. Triggers different kinds of
+ out-of-bounds and use-after-free accesses. Useful for testing whether
+ KASAN can detect certain bug types.
For more information on KUnit and unit tests in general, please refer
- to the KUnit documentation in Documentation/dev-tools/kunit.
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
config KASAN_MODULE_TEST
tristate "KUnit-incompatible tests of KASAN bug detection capabilities"
depends on m && KASAN && !KASAN_HW_TAGS
help
- This is a part of the KASAN test suite that is incompatible with
- KUnit. Currently includes tests that do bad copy_from/to_user
- accesses.
+ A part of the KASAN test suite that is not integrated with KUnit.
+ Incompatible with Hardware Tag-Based KASAN.
endif # KASAN
projects / platform / kernel / linux-starfive.git / commitdiff