2018-04-16 Alan Modra <amodra@gmail.com>
+ * Makefile.am: Remove h8300-coff support.
+ * coffcode.h: Likewise.
+ * config.bfd: Likewise.
+ * configure.ac: Likewise.
+ * reloc16.c: Likewise.
+ * targets.c: Likewise.
+ * coff-h8300.c: Delete.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+ * po/SRC-POTFILES.in: Regenerate.
+
+2018-04-16 Alan Modra <amodra@gmail.com>
+
* Makefile.am: Remove IEEE 695 support.
* archures.c: Likewise.
* bfd.c: Likewise.
coff-arm.lo \
coff-aux.lo \
coff-go32.lo \
- coff-h8300.lo \
coff-h8500.lo \
coff-i386.lo \
coff-m68k.lo \
coff-arm.c \
coff-aux.c \
coff-go32.c \
- coff-h8300.c \
coff-h8500.c \
coff-i386.c \
coff-m68k.c \
coff-arm.lo \
coff-aux.lo \
coff-go32.lo \
- coff-h8300.lo \
coff-h8500.lo \
coff-i386.lo \
coff-m68k.lo \
coff-arm.c \
coff-aux.c \
coff-go32.c \
- coff-h8300.c \
coff-h8500.c \
coff-i386.c \
coff-m68k.c \
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-aux.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-bfd.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-go32.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-h8300.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-h8500.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-i386.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-m68k.Plo@am__quote@
+++ /dev/null
-/* BFD back-end for Renesas H8/300 COFF binaries.
- Copyright (C) 1990-2018 Free Software Foundation, Inc.
- Written by Steve Chamberlain, <sac@cygnus.com>.
-
- This file is part of BFD, the Binary File Descriptor library.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
- MA 02110-1301, USA. */
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libbfd.h"
-#include "bfdlink.h"
-#include "genlink.h"
-#include "coff/h8300.h"
-#include "coff/internal.h"
-#include "libcoff.h"
-#include "libiberty.h"
-
-#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)
-
-/* We derive a hash table from the basic BFD hash table to
- hold entries in the function vector. Aside from the
- info stored by the basic hash table, we need the offset
- of a particular entry within the hash table as well as
- the offset where we'll add the next entry. */
-
-struct funcvec_hash_entry
- {
- /* The basic hash table entry. */
- struct bfd_hash_entry root;
-
- /* The offset within the vectors section where
- this entry lives. */
- bfd_vma offset;
- };
-
-struct funcvec_hash_table
- {
- /* The basic hash table. */
- struct bfd_hash_table root;
-
- bfd *abfd;
-
- /* Offset at which we'll add the next entry. */
- unsigned int offset;
- };
-
-
-/* To lookup a value in the function vector hash table. */
-#define funcvec_hash_lookup(table, string, create, copy) \
- ((struct funcvec_hash_entry *) \
- bfd_hash_lookup (&(table)->root, (string), (create), (copy)))
-
-/* The derived h8300 COFF linker table. Note it's derived from
- the generic linker hash table, not the COFF backend linker hash
- table! We use this to attach additional data structures we
- need while linking on the h8300. */
-struct h8300_coff_link_hash_table {
- /* The main hash table. */
- struct generic_link_hash_table root;
-
- /* Section for the vectors table. This gets attached to a
- random input bfd, we keep it here for easy access. */
- asection *vectors_sec;
-
- /* Hash table of the functions we need to enter into the function
- vector. */
- struct funcvec_hash_table *funcvec_hash_table;
-};
-
-static struct bfd_link_hash_table *h8300_coff_link_hash_table_create (bfd *);
-
-/* Get the H8/300 COFF linker hash table from a link_info structure. */
-
-#define h8300_coff_hash_table(p) \
- ((struct h8300_coff_link_hash_table *) ((coff_hash_table (p))))
-
-/* Initialize fields within a funcvec hash table entry. Called whenever
- a new entry is added to the funcvec hash table. */
-
-static struct bfd_hash_entry *
-funcvec_hash_newfunc (struct bfd_hash_entry *entry,
- struct bfd_hash_table *gen_table,
- const char *string)
-{
- struct funcvec_hash_entry *ret;
- struct funcvec_hash_table *table;
-
- ret = (struct funcvec_hash_entry *) entry;
- table = (struct funcvec_hash_table *) gen_table;
-
- /* Allocate the structure if it has not already been allocated by a
- subclass. */
- if (ret == NULL)
- ret = ((struct funcvec_hash_entry *)
- bfd_hash_allocate (gen_table,
- sizeof (struct funcvec_hash_entry)));
- if (ret == NULL)
- return NULL;
-
- /* Call the allocation method of the superclass. */
- ret = ((struct funcvec_hash_entry *)
- bfd_hash_newfunc ((struct bfd_hash_entry *) ret, gen_table, string));
-
- if (ret == NULL)
- return NULL;
-
- /* Note where this entry will reside in the function vector table. */
- ret->offset = table->offset;
-
- /* Bump the offset at which we store entries in the function
- vector. We'd like to bump up the size of the vectors section,
- but it's not easily available here. */
- switch (bfd_get_mach (table->abfd))
- {
- case bfd_mach_h8300:
- case bfd_mach_h8300hn:
- case bfd_mach_h8300sn:
- table->offset += 2;
- break;
- case bfd_mach_h8300h:
- case bfd_mach_h8300s:
- table->offset += 4;
- break;
- default:
- return NULL;
- }
-
- /* Everything went OK. */
- return (struct bfd_hash_entry *) ret;
-}
-
-/* Initialize the function vector hash table. */
-
-static bfd_boolean
-funcvec_hash_table_init (struct funcvec_hash_table *table,
- bfd *abfd,
- struct bfd_hash_entry *(*newfunc)
- (struct bfd_hash_entry *,
- struct bfd_hash_table *,
- const char *),
- unsigned int entsize)
-{
- /* Initialize our local fields, then call the generic initialization
- routine. */
- table->offset = 0;
- table->abfd = abfd;
- return (bfd_hash_table_init (&table->root, newfunc, entsize));
-}
-
-/* Create the derived linker hash table. We use a derived hash table
- basically to hold "static" information during an H8/300 coff link
- without using static variables. */
-
-static struct bfd_link_hash_table *
-h8300_coff_link_hash_table_create (bfd *abfd)
-{
- struct h8300_coff_link_hash_table *ret;
- bfd_size_type amt = sizeof (struct h8300_coff_link_hash_table);
-
- ret = (struct h8300_coff_link_hash_table *) bfd_zmalloc (amt);
- if (ret == NULL)
- return NULL;
- if (!_bfd_link_hash_table_init (&ret->root.root, abfd,
- _bfd_generic_link_hash_newfunc,
- sizeof (struct generic_link_hash_entry)))
- {
- free (ret);
- return NULL;
- }
-
- return &ret->root.root;
-}
-
-/* Special handling for H8/300 relocs.
- We only come here for pcrel stuff and return normally if not an -r link.
- When doing -r, we can't do any arithmetic for the pcrel stuff, because
- the code in reloc.c assumes that we can manipulate the targets of
- the pcrel branches. This isn't so, since the H8/300 can do relaxing,
- which means that the gap after the instruction may not be enough to
- contain the offset required for the branch, so we have to use only
- the addend until the final link. */
-
-static bfd_reloc_status_type
-special (bfd * abfd ATTRIBUTE_UNUSED,
- arelent * reloc_entry ATTRIBUTE_UNUSED,
- asymbol * symbol ATTRIBUTE_UNUSED,
- void * data ATTRIBUTE_UNUSED,
- asection * input_section ATTRIBUTE_UNUSED,
- bfd * output_bfd,
- char ** error_message ATTRIBUTE_UNUSED)
-{
- if (output_bfd == (bfd *) NULL)
- return bfd_reloc_continue;
-
- /* Adjust the reloc address to that in the output section. */
- reloc_entry->address += input_section->output_offset;
- return bfd_reloc_ok;
-}
-
-static reloc_howto_type howto_table[] =
-{
- HOWTO (R_RELBYTE, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "8", FALSE, 0x000000ff, 0x000000ff, FALSE),
- HOWTO (R_RELWORD, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "16", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
- HOWTO (R_RELLONG, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, special, "32", FALSE, 0xffffffff, 0xffffffff, FALSE),
- HOWTO (R_PCRBYTE, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "DISP8", FALSE, 0x000000ff, 0x000000ff, TRUE),
- HOWTO (R_PCRWORD, 0, 1, 16, TRUE, 0, complain_overflow_signed, special, "DISP16", FALSE, 0x0000ffff, 0x0000ffff, TRUE),
- HOWTO (R_PCRLONG, 0, 2, 32, TRUE, 0, complain_overflow_signed, special, "DISP32", FALSE, 0xffffffff, 0xffffffff, TRUE),
- HOWTO (R_MOV16B1, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "relaxable mov.b:16", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
- HOWTO (R_MOV16B2, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, special, "relaxed mov.b:16", FALSE, 0x000000ff, 0x000000ff, FALSE),
- HOWTO (R_JMP1, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "16/pcrel", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
- HOWTO (R_JMP2, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "pcrecl/16", FALSE, 0x000000ff, 0x000000ff, FALSE),
- HOWTO (R_JMPL1, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, special, "24/pcrell", FALSE, 0x00ffffff, 0x00ffffff, FALSE),
- HOWTO (R_JMPL2, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "pc8/24", FALSE, 0x000000ff, 0x000000ff, FALSE),
- HOWTO (R_MOV24B1, 0, 1, 32, FALSE, 0, complain_overflow_bitfield, special, "relaxable mov.b:24", FALSE, 0xffffffff, 0xffffffff, FALSE),
- HOWTO (R_MOV24B2, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, special, "relaxed mov.b:24", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
-
- /* An indirect reference to a function. This causes the function's address
- to be added to the function vector in lo-mem and puts the address of
- the function vector's entry in the jsr instruction. */
- HOWTO (R_MEM_INDIRECT, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "8/indirect", FALSE, 0x000000ff, 0x000000ff, FALSE),
-
- /* Internal reloc for relaxing. This is created when a 16-bit pc-relative
- branch is turned into an 8-bit pc-relative branch. */
- HOWTO (R_PCRWORD_B, 0, 0, 8, TRUE, 0, complain_overflow_bitfield, special, "relaxed bCC:16", FALSE, 0x000000ff, 0x000000ff, FALSE),
-
- HOWTO (R_MOVL1, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,special, "32/24 relaxable move", FALSE, 0xffffffff, 0xffffffff, FALSE),
-
- HOWTO (R_MOVL2, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "32/24 relaxed move", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
-
- HOWTO (R_BCC_INV, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "DISP8 inverted", FALSE, 0x000000ff, 0x000000ff, TRUE),
-
- HOWTO (R_JMP_DEL, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "Deleted jump", FALSE, 0x000000ff, 0x000000ff, TRUE),
-};
-
-/* Turn a howto into a reloc number. */
-
-#define SELECT_RELOC(x,howto) \
- { x.r_type = select_reloc (howto); }
-
-#define BADMAG(x) (H8300BADMAG (x) && H8300HBADMAG (x) && H8300SBADMAG (x) \
- && H8300HNBADMAG(x) && H8300SNBADMAG(x))
-#define H8300 1 /* Customize coffcode.h */
-#define __A_MAGIC_SET__
-
-/* Code to swap in the reloc. */
-#define SWAP_IN_RELOC_OFFSET H_GET_32
-#define SWAP_OUT_RELOC_OFFSET H_PUT_32
-#define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \
- dst->r_stuff[0] = 'S'; \
- dst->r_stuff[1] = 'C';
-
-static int
-select_reloc (reloc_howto_type *howto)
-{
- return howto->type;
-}
-
-/* Code to turn a r_type into a howto ptr, uses the above howto table. */
-
-static void
-rtype2howto (arelent *internal, struct internal_reloc *dst)
-{
- switch (dst->r_type)
- {
- case R_RELBYTE:
- internal->howto = howto_table + 0;
- break;
- case R_RELWORD:
- internal->howto = howto_table + 1;
- break;
- case R_RELLONG:
- internal->howto = howto_table + 2;
- break;
- case R_PCRBYTE:
- internal->howto = howto_table + 3;
- break;
- case R_PCRWORD:
- internal->howto = howto_table + 4;
- break;
- case R_PCRLONG:
- internal->howto = howto_table + 5;
- break;
- case R_MOV16B1:
- internal->howto = howto_table + 6;
- break;
- case R_MOV16B2:
- internal->howto = howto_table + 7;
- break;
- case R_JMP1:
- internal->howto = howto_table + 8;
- break;
- case R_JMP2:
- internal->howto = howto_table + 9;
- break;
- case R_JMPL1:
- internal->howto = howto_table + 10;
- break;
- case R_JMPL2:
- internal->howto = howto_table + 11;
- break;
- case R_MOV24B1:
- internal->howto = howto_table + 12;
- break;
- case R_MOV24B2:
- internal->howto = howto_table + 13;
- break;
- case R_MEM_INDIRECT:
- internal->howto = howto_table + 14;
- break;
- case R_PCRWORD_B:
- internal->howto = howto_table + 15;
- break;
- case R_MOVL1:
- internal->howto = howto_table + 16;
- break;
- case R_MOVL2:
- internal->howto = howto_table + 17;
- break;
- case R_BCC_INV:
- internal->howto = howto_table + 18;
- break;
- case R_JMP_DEL:
- internal->howto = howto_table + 19;
- break;
- default:
- internal->howto = NULL;
- break;
- }
-}
-
-#define RTYPE2HOWTO(internal, relocentry) rtype2howto (internal, relocentry)
-
-/* Perform any necessary magic to the addend in a reloc entry. */
-
-#define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
- cache_ptr->addend = ext_reloc.r_offset;
-
-#define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \
- reloc_processing (relent, reloc, symbols, abfd, section)
-
-static void
-reloc_processing (arelent *relent, struct internal_reloc *reloc,
- asymbol **symbols, bfd *abfd, asection *section)
-{
- relent->address = reloc->r_vaddr;
- rtype2howto (relent, reloc);
-
- if (((int) reloc->r_symndx) > 0)
- relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
- else
- relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
-
- relent->addend = reloc->r_offset;
- relent->address -= section->vma;
-}
-
-static bfd_boolean
-h8300_symbol_address_p (bfd *abfd, asection *input_section, bfd_vma address)
-{
- asymbol **s;
-
- s = _bfd_generic_link_get_symbols (abfd);
- BFD_ASSERT (s != (asymbol **) NULL);
-
- /* Search all the symbols for one in INPUT_SECTION with
- address ADDRESS. */
- while (*s)
- {
- asymbol *p = *s;
-
- if (p->section == input_section
- && (input_section->output_section->vma
- + input_section->output_offset
- + p->value) == address)
- return TRUE;
- s++;
- }
- return FALSE;
-}
-
-/* If RELOC represents a relaxable instruction/reloc, change it into
- the relaxed reloc, notify the linker that symbol addresses
- have changed (bfd_perform_slip) and return how much the current
- section has shrunk by.
-
- FIXME: Much of this code has knowledge of the ordering of entries
- in the howto table. This needs to be fixed. */
-
-static int
-h8300_reloc16_estimate (bfd *abfd, asection *input_section, arelent *reloc,
- unsigned int shrink, struct bfd_link_info *link_info)
-{
- bfd_vma value;
- bfd_vma dot;
- bfd_vma gap;
- static asection *last_input_section = NULL;
- static arelent *last_reloc = NULL;
-
- /* The address of the thing to be relocated will have moved back by
- the size of the shrink - but we don't change reloc->address here,
- since we need it to know where the relocation lives in the source
- uncooked section. */
- bfd_vma address = reloc->address - shrink;
-
- if (input_section != last_input_section)
- last_reloc = NULL;
-
- /* Only examine the relocs which might be relaxable. */
- switch (reloc->howto->type)
- {
- /* This is the 16-/24-bit absolute branch which could become an
- 8-bit pc-relative branch. */
- case R_JMP1:
- case R_JMPL1:
- /* Get the address of the target of this branch. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
-
- /* Get the address of the next instruction (not the reloc). */
- dot = (input_section->output_section->vma
- + input_section->output_offset + address);
-
- /* Adjust for R_JMP1 vs R_JMPL1. */
- dot += (reloc->howto->type == R_JMP1 ? 1 : 2);
-
- /* Compute the distance from this insn to the branch target. */
- gap = value - dot;
-
- /* If the distance is within -128..+128 inclusive, then we can relax
- this jump. +128 is valid since the target will move two bytes
- closer if we do relax this branch. */
- if ((int) gap >= -128 && (int) gap <= 128)
- {
- bfd_byte code;
-
- if (!bfd_get_section_contents (abfd, input_section, & code,
- reloc->address, 1))
- break;
- code = bfd_get_8 (abfd, & code);
-
- /* It's possible we may be able to eliminate this branch entirely;
- if the previous instruction is a branch around this instruction,
- and there's no label at this instruction, then we can reverse
- the condition on the previous branch and eliminate this jump.
-
- original: new:
- bCC lab1 bCC' lab2
- jmp lab2
- lab1: lab1:
-
- This saves 4 bytes instead of two, and should be relatively
- common.
-
- Only perform this optimisation for jumps (code 0x5a) not
- subroutine calls, as otherwise it could transform:
-
- mov.w r0,r0
- beq .L1
- jsr @_bar
- .L1: rts
- _bar: rts
- into:
- mov.w r0,r0
- bne _bar
- rts
- _bar: rts
-
- which changes the call (jsr) into a branch (bne). */
- if (code == 0x5a
- && gap <= 126
- && last_reloc
- && last_reloc->howto->type == R_PCRBYTE)
- {
- bfd_vma last_value;
- last_value = bfd_coff_reloc16_get_value (last_reloc, link_info,
- input_section) + 1;
-
- if (last_value == dot + 2
- && last_reloc->address + 1 == reloc->address
- && !h8300_symbol_address_p (abfd, input_section, dot - 2))
- {
- reloc->howto = howto_table + 19;
- last_reloc->howto = howto_table + 18;
- last_reloc->sym_ptr_ptr = reloc->sym_ptr_ptr;
- last_reloc->addend = reloc->addend;
- shrink += 4;
- bfd_perform_slip (abfd, 4, input_section, address);
- break;
- }
- }
-
- /* Change the reloc type. */
- reloc->howto = reloc->howto + 1;
-
- /* This shrinks this section by two bytes. */
- shrink += 2;
- bfd_perform_slip (abfd, 2, input_section, address);
- }
- break;
-
- /* This is the 16-bit pc-relative branch which could become an 8-bit
- pc-relative branch. */
- case R_PCRWORD:
- /* Get the address of the target of this branch, add one to the value
- because the addend field in PCrel jumps is off by -1. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section) + 1;
-
- /* Get the address of the next instruction if we were to relax. */
- dot = input_section->output_section->vma +
- input_section->output_offset + address;
-
- /* Compute the distance from this insn to the branch target. */
- gap = value - dot;
-
- /* If the distance is within -128..+128 inclusive, then we can relax
- this jump. +128 is valid since the target will move two bytes
- closer if we do relax this branch. */
- if ((int) gap >= -128 && (int) gap <= 128)
- {
- /* Change the reloc type. */
- reloc->howto = howto_table + 15;
-
- /* This shrinks this section by two bytes. */
- shrink += 2;
- bfd_perform_slip (abfd, 2, input_section, address);
- }
- break;
-
- /* This is a 16-bit absolute address in a mov.b insn, which can
- become an 8-bit absolute address if it's in the right range. */
- case R_MOV16B1:
- /* Get the address of the data referenced by this mov.b insn. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- value = bfd_h8300_pad_address (abfd, value);
-
- /* If the address is in the top 256 bytes of the address space
- then we can relax this instruction. */
- if (value >= 0xffffff00u)
- {
- /* Change the reloc type. */
- reloc->howto = reloc->howto + 1;
-
- /* This shrinks this section by two bytes. */
- shrink += 2;
- bfd_perform_slip (abfd, 2, input_section, address);
- }
- break;
-
- /* Similarly for a 24-bit absolute address in a mov.b. Note that
- if we can't relax this into an 8-bit absolute, we'll fall through
- and try to relax it into a 16-bit absolute. */
- case R_MOV24B1:
- /* Get the address of the data referenced by this mov.b insn. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- value = bfd_h8300_pad_address (abfd, value);
-
- if (value >= 0xffffff00u)
- {
- /* Change the reloc type. */
- reloc->howto = reloc->howto + 1;
-
- /* This shrinks this section by four bytes. */
- shrink += 4;
- bfd_perform_slip (abfd, 4, input_section, address);
-
- /* Done with this reloc. */
- break;
- }
- /* Fall through. */
-
- /* This is a 24-/32-bit absolute address in a mov insn, which can
- become an 16-bit absolute address if it's in the right range. */
- case R_MOVL1:
- /* Get the address of the data referenced by this mov insn. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- value = bfd_h8300_pad_address (abfd, value);
-
- /* If the address is a sign-extended 16-bit value then we can
- relax this instruction. */
- if (value <= 0x7fff || value >= 0xffff8000u)
- {
- /* Change the reloc type. */
- reloc->howto = howto_table + 17;
-
- /* This shrinks this section by two bytes. */
- shrink += 2;
- bfd_perform_slip (abfd, 2, input_section, address);
- }
- break;
-
- /* No other reloc types represent relaxing opportunities. */
- default:
- break;
- }
-
- last_reloc = reloc;
- last_input_section = input_section;
- return shrink;
-}
-
-/* Handle relocations for the H8/300, including relocs for relaxed
- instructions.
-
- FIXME: Not all relocations check for overflow! */
-
-static void
-h8300_reloc16_extra_cases (bfd *abfd, struct bfd_link_info *link_info,
- struct bfd_link_order *link_order, arelent *reloc,
- bfd_byte *data, unsigned int *src_ptr,
- unsigned int *dst_ptr)
-{
- unsigned int src_address = *src_ptr;
- unsigned int dst_address = *dst_ptr;
- asection *input_section = link_order->u.indirect.section;
- bfd_vma value;
- bfd_vma dot;
- int gap, tmp;
- unsigned char temp_code;
-
- switch (reloc->howto->type)
- {
- /* Generic 8-bit pc-relative relocation. */
- case R_PCRBYTE:
- /* Get the address of the target of this branch. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
-
- dot = (input_section->output_offset
- + dst_address
- + link_order->u.indirect.section->output_section->vma);
-
- gap = value - dot;
-
- /* Sanity check. */
- if (gap < -128 || gap > 126)
- (*link_info->callbacks->reloc_overflow)
- (link_info, NULL, bfd_asymbol_name (*reloc->sym_ptr_ptr),
- reloc->howto->name, reloc->addend, input_section->owner,
- input_section, reloc->address);
-
- /* Everything looks OK. Apply the relocation and update the
- src/dst address appropriately. */
- bfd_put_8 (abfd, gap, data + dst_address);
- dst_address++;
- src_address++;
-
- /* All done. */
- break;
-
- /* Generic 16-bit pc-relative relocation. */
- case R_PCRWORD:
- /* Get the address of the target of this branch. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
-
- /* Get the address of the instruction (not the reloc). */
- dot = (input_section->output_offset
- + dst_address
- + link_order->u.indirect.section->output_section->vma + 1);
-
- gap = value - dot;
-
- /* Sanity check. */
- if (gap > 32766 || gap < -32768)
- (*link_info->callbacks->reloc_overflow)
- (link_info, NULL, bfd_asymbol_name (*reloc->sym_ptr_ptr),
- reloc->howto->name, reloc->addend, input_section->owner,
- input_section, reloc->address);
-
- /* Everything looks OK. Apply the relocation and update the
- src/dst address appropriately. */
- bfd_put_16 (abfd, (bfd_vma) gap, data + dst_address);
- dst_address += 2;
- src_address += 2;
-
- /* All done. */
- break;
-
- /* Generic 8-bit absolute relocation. */
- case R_RELBYTE:
- /* Get the address of the object referenced by this insn. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
-
- bfd_put_8 (abfd, value & 0xff, data + dst_address);
- dst_address += 1;
- src_address += 1;
-
- /* All done. */
- break;
-
- /* Various simple 16-bit absolute relocations. */
- case R_MOV16B1:
- case R_JMP1:
- case R_RELWORD:
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- bfd_put_16 (abfd, value, data + dst_address);
- dst_address += 2;
- src_address += 2;
- break;
-
- /* Various simple 24-/32-bit absolute relocations. */
- case R_MOV24B1:
- case R_MOVL1:
- case R_RELLONG:
- /* Get the address of the target of this branch. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- bfd_put_32 (abfd, value, data + dst_address);
- dst_address += 4;
- src_address += 4;
- break;
-
- /* Another 24-/32-bit absolute relocation. */
- case R_JMPL1:
- /* Get the address of the target of this branch. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
-
- value = ((value & 0x00ffffff)
- | (bfd_get_32 (abfd, data + src_address) & 0xff000000));
- bfd_put_32 (abfd, value, data + dst_address);
- dst_address += 4;
- src_address += 4;
- break;
-
- /* This is a 24-/32-bit absolute address in one of the following
- instructions:
-
- "band", "bclr", "biand", "bild", "bior", "bist", "bixor",
- "bld", "bnot", "bor", "bset", "bst", "btst", "bxor", "ldc.w",
- "stc.w" and "mov.[bwl]"
-
- We may relax this into an 16-bit absolute address if it's in
- the right range. */
- case R_MOVL2:
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- value = bfd_h8300_pad_address (abfd, value);
-
- /* Sanity check. */
- if (value <= 0x7fff || value >= 0xffff8000u)
- {
- /* Insert the 16-bit value into the proper location. */
- bfd_put_16 (abfd, value, data + dst_address);
-
- /* Fix the opcode. For all the instructions that belong to
- this relaxation, we simply need to turn off bit 0x20 in
- the previous byte. */
- data[dst_address - 1] &= ~0x20;
- dst_address += 2;
- src_address += 4;
- }
- else
- (*link_info->callbacks->reloc_overflow)
- (link_info, NULL, bfd_asymbol_name (*reloc->sym_ptr_ptr),
- reloc->howto->name, reloc->addend, input_section->owner,
- input_section, reloc->address);
- break;
-
- /* A 16-bit absolute branch that is now an 8-bit pc-relative branch. */
- case R_JMP2:
- /* Get the address of the target of this branch. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
-
- /* Get the address of the next instruction. */
- dot = (input_section->output_offset
- + dst_address
- + link_order->u.indirect.section->output_section->vma + 1);
-
- gap = value - dot;
-
- /* Sanity check. */
- if (gap < -128 || gap > 126)
- (*link_info->callbacks->reloc_overflow)
- (link_info, NULL, bfd_asymbol_name (*reloc->sym_ptr_ptr),
- reloc->howto->name, reloc->addend, input_section->owner,
- input_section, reloc->address);
-
- /* Now fix the instruction itself. */
- switch (data[dst_address - 1])
- {
- case 0x5e:
- /* jsr -> bsr */
- bfd_put_8 (abfd, 0x55, data + dst_address - 1);
- break;
- case 0x5a:
- /* jmp -> bra */
- bfd_put_8 (abfd, 0x40, data + dst_address - 1);
- break;
-
- default:
- abort ();
- }
-
- /* Write out the 8-bit value. */
- bfd_put_8 (abfd, gap, data + dst_address);
-
- dst_address += 1;
- src_address += 3;
-
- break;
-
- /* A 16-bit pc-relative branch that is now an 8-bit pc-relative branch. */
- case R_PCRWORD_B:
- /* Get the address of the target of this branch. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
-
- /* Get the address of the instruction (not the reloc). */
- dot = (input_section->output_offset
- + dst_address
- + link_order->u.indirect.section->output_section->vma - 1);
-
- gap = value - dot;
-
- /* Sanity check. */
- if (gap < -128 || gap > 126)
- (*link_info->callbacks->reloc_overflow)
- (link_info, NULL, bfd_asymbol_name (*reloc->sym_ptr_ptr),
- reloc->howto->name, reloc->addend, input_section->owner,
- input_section, reloc->address);
-
- /* Now fix the instruction. */
- switch (data[dst_address - 2])
- {
- case 0x58:
- /* bCC:16 -> bCC:8 */
- /* Get the second byte of the original insn, which contains
- the condition code. */
- tmp = data[dst_address - 1];
-
- /* Compute the fisrt byte of the relaxed instruction. The
- original sequence 0x58 0xX0 is relaxed to 0x4X, where X
- represents the condition code. */
- tmp &= 0xf0;
- tmp >>= 4;
- tmp |= 0x40;
-
- /* Write it. */
- bfd_put_8 (abfd, tmp, data + dst_address - 2);
- break;
-
- case 0x5c:
- /* bsr:16 -> bsr:8 */
- bfd_put_8 (abfd, 0x55, data + dst_address - 2);
- break;
-
- default:
- abort ();
- }
-
- /* Output the target. */
- bfd_put_8 (abfd, gap, data + dst_address - 1);
-
- /* We don't advance dst_address -- the 8-bit reloc is applied at
- dst_address - 1, so the next insn should begin at dst_address. */
- src_address += 2;
-
- break;
-
- /* Similarly for a 24-bit absolute that is now 8 bits. */
- case R_JMPL2:
- /* Get the address of the target of this branch. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
-
- /* Get the address of the instruction (not the reloc). */
- dot = (input_section->output_offset
- + dst_address
- + link_order->u.indirect.section->output_section->vma + 2);
-
- gap = value - dot;
-
- /* Fix the instruction. */
- switch (data[src_address])
- {
- case 0x5e:
- /* jsr -> bsr */
- bfd_put_8 (abfd, 0x55, data + dst_address);
- break;
- case 0x5a:
- /* jmp ->bra */
- bfd_put_8 (abfd, 0x40, data + dst_address);
- break;
- default:
- abort ();
- }
-
- bfd_put_8 (abfd, gap, data + dst_address + 1);
- dst_address += 2;
- src_address += 4;
-
- break;
-
- /* This is a 16-bit absolute address in one of the following
- instructions:
-
- "band", "bclr", "biand", "bild", "bior", "bist", "bixor",
- "bld", "bnot", "bor", "bset", "bst", "btst", "bxor", and
- "mov.b"
-
- We may relax this into an 8-bit absolute address if it's in
- the right range. */
- case R_MOV16B2:
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
-
- /* All instructions with R_H8_DIR16B2 start with 0x6a. */
- if (data[dst_address - 2] != 0x6a)
- abort ();
-
- temp_code = data[src_address - 1];
-
- /* If this is a mov.b instruction, clear the lower nibble, which
- contains the source/destination register number. */
- if ((temp_code & 0x10) != 0x10)
- temp_code &= 0xf0;
-
- /* Fix up the opcode. */
- switch (temp_code)
- {
- case 0x00:
- /* This is mov.b @aa:16,Rd. */
- data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x20;
- break;
- case 0x80:
- /* This is mov.b Rs,@aa:16. */
- data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x30;
- break;
- case 0x18:
- /* This is a bit-maniputation instruction that stores one
- bit into memory, one of "bclr", "bist", "bnot", "bset",
- and "bst". */
- data[dst_address - 2] = 0x7f;
- break;
- case 0x10:
- /* This is a bit-maniputation instruction that loads one bit
- from memory, one of "band", "biand", "bild", "bior",
- "bixor", "bld", "bor", "btst", and "bxor". */
- data[dst_address - 2] = 0x7e;
- break;
- default:
- abort ();
- }
-
- bfd_put_8 (abfd, value & 0xff, data + dst_address - 1);
- src_address += 2;
- break;
-
- /* This is a 24-bit absolute address in one of the following
- instructions:
-
- "band", "bclr", "biand", "bild", "bior", "bist", "bixor",
- "bld", "bnot", "bor", "bset", "bst", "btst", "bxor", and
- "mov.b"
-
- We may relax this into an 8-bit absolute address if it's in
- the right range. */
- case R_MOV24B2:
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
-
- /* All instructions with R_MOV24B2 start with 0x6a. */
- if (data[dst_address - 2] != 0x6a)
- abort ();
-
- temp_code = data[src_address - 1];
-
- /* If this is a mov.b instruction, clear the lower nibble, which
- contains the source/destination register number. */
- if ((temp_code & 0x30) != 0x30)
- temp_code &= 0xf0;
-
- /* Fix up the opcode. */
- switch (temp_code)
- {
- case 0x20:
- /* This is mov.b @aa:24/32,Rd. */
- data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x20;
- break;
- case 0xa0:
- /* This is mov.b Rs,@aa:24/32. */
- data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x30;
- break;
- case 0x38:
- /* This is a bit-maniputation instruction that stores one
- bit into memory, one of "bclr", "bist", "bnot", "bset",
- and "bst". */
- data[dst_address - 2] = 0x7f;
- break;
- case 0x30:
- /* This is a bit-maniputation instruction that loads one bit
- from memory, one of "band", "biand", "bild", "bior",
- "bixor", "bld", "bor", "btst", and "bxor". */
- data[dst_address - 2] = 0x7e;
- break;
- default:
- abort ();
- }
-
- bfd_put_8 (abfd, value & 0xff, data + dst_address - 1);
- src_address += 4;
- break;
-
- case R_BCC_INV:
- /* Get the address of the target of this branch. */
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
-
- dot = (input_section->output_offset
- + dst_address
- + link_order->u.indirect.section->output_section->vma) + 1;
-
- gap = value - dot;
-
- /* Sanity check. */
- if (gap < -128 || gap > 126)
- (*link_info->callbacks->reloc_overflow)
- (link_info, NULL, bfd_asymbol_name (*reloc->sym_ptr_ptr),
- reloc->howto->name, reloc->addend, input_section->owner,
- input_section, reloc->address);
-
- /* Everything looks OK. Fix the condition in the instruction, apply
- the relocation, and update the src/dst address appropriately. */
-
- bfd_put_8 (abfd, bfd_get_8 (abfd, data + dst_address - 1) ^ 1,
- data + dst_address - 1);
- bfd_put_8 (abfd, gap, data + dst_address);
- dst_address++;
- src_address++;
-
- /* All done. */
- break;
-
- case R_JMP_DEL:
- src_address += 4;
- break;
-
- /* An 8-bit memory indirect instruction (jmp/jsr).
-
- There's several things that need to be done to handle
- this relocation.
-
- If this is a reloc against the absolute symbol, then
- we should handle it just R_RELBYTE. Likewise if it's
- for a symbol with a value ge 0 and le 0xff.
-
- Otherwise it's a jump/call through the function vector,
- and the linker is expected to set up the function vector
- and put the right value into the jump/call instruction. */
- case R_MEM_INDIRECT:
- {
- /* We need to find the symbol so we can determine it's
- address in the function vector table. */
- asymbol *symbol;
- const char *name;
- struct funcvec_hash_table *ftab;
- struct funcvec_hash_entry *h;
- struct h8300_coff_link_hash_table *htab;
- asection *vectors_sec;
-
- if (link_info->output_bfd->xvec != abfd->xvec)
- {
- _bfd_error_handler
- (_("cannot handle R_MEM_INDIRECT reloc when using %s output"),
- link_info->output_bfd->xvec->name);
-
- /* What else can we do? This function doesn't allow return
- of an error, and we don't want to call abort as that
- indicates an internal error. */
-#ifndef EXIT_FAILURE
-#define EXIT_FAILURE 1
-#endif
- xexit (EXIT_FAILURE);
- }
- htab = h8300_coff_hash_table (link_info);
- vectors_sec = htab->vectors_sec;
-
- /* First see if this is a reloc against the absolute symbol
- or against a symbol with a nonnegative value <= 0xff. */
- symbol = *(reloc->sym_ptr_ptr);
- value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- if (symbol == bfd_abs_section_ptr->symbol
- || value <= 0xff)
- {
- /* This should be handled in a manner very similar to
- R_RELBYTES. If the value is in range, then just slam
- the value into the right location. Else trigger a
- reloc overflow callback. */
- if (value <= 0xff)
- {
- bfd_put_8 (abfd, value, data + dst_address);
- dst_address += 1;
- src_address += 1;
- }
- else
- (*link_info->callbacks->reloc_overflow)
- (link_info, NULL, bfd_asymbol_name (*reloc->sym_ptr_ptr),
- reloc->howto->name, reloc->addend, input_section->owner,
- input_section, reloc->address);
- break;
- }
-
- /* This is a jump/call through a function vector, and we're
- expected to create the function vector ourselves.
-
- First look up this symbol in the linker hash table -- we need
- the derived linker symbol which holds this symbol's index
- in the function vector. */
- name = symbol->name;
- if (symbol->flags & BSF_LOCAL)
- {
- char *new_name = bfd_malloc ((bfd_size_type) strlen (name) + 10);
-
- if (new_name == NULL)
- abort ();
-
- sprintf (new_name, "%s_%08x", name, symbol->section->id);
- name = new_name;
- }
-
- ftab = htab->funcvec_hash_table;
- h = funcvec_hash_lookup (ftab, name, FALSE, FALSE);
-
- /* This shouldn't ever happen. If it does that means we've got
- data corruption of some kind. Aborting seems like a reasonable
- thing to do here. */
- if (h == NULL || vectors_sec == NULL)
- abort ();
-
- /* Place the address of the function vector entry into the
- reloc's address. */
- bfd_put_8 (abfd,
- vectors_sec->output_offset + h->offset,
- data + dst_address);
-
- dst_address++;
- src_address++;
-
- /* Now create an entry in the function vector itself. */
- switch (bfd_get_mach (input_section->owner))
- {
- case bfd_mach_h8300:
- case bfd_mach_h8300hn:
- case bfd_mach_h8300sn:
- bfd_put_16 (abfd,
- bfd_coff_reloc16_get_value (reloc,
- link_info,
- input_section),
- vectors_sec->contents + h->offset);
- break;
- case bfd_mach_h8300h:
- case bfd_mach_h8300s:
- bfd_put_32 (abfd,
- bfd_coff_reloc16_get_value (reloc,
- link_info,
- input_section),
- vectors_sec->contents + h->offset);
- break;
- default:
- abort ();
- }
-
- /* Gross. We've already written the contents of the vector section
- before we get here... So we write it again with the new data. */
- bfd_set_section_contents (vectors_sec->output_section->owner,
- vectors_sec->output_section,
- vectors_sec->contents,
- (file_ptr) vectors_sec->output_offset,
- vectors_sec->size);
- break;
- }
-
- default:
- abort ();
- break;
-
- }
-
- *src_ptr = src_address;
- *dst_ptr = dst_address;
-}
-
-/* Routine for the h8300 linker.
-
- This routine is necessary to handle the special R_MEM_INDIRECT
- relocs on the h8300. It's responsible for generating a vectors
- section and attaching it to an input bfd as well as sizing
- the vectors section. It also creates our vectors hash table.
-
- It uses the generic linker routines to actually add the symbols.
- from this BFD to the bfd linker hash table. It may add a few
- selected static symbols to the bfd linker hash table. */
-
-static bfd_boolean
-h8300_bfd_link_add_symbols (bfd *abfd, struct bfd_link_info *info)
-{
- asection *sec;
- struct funcvec_hash_table *funcvec_hash_table;
- bfd_size_type amt;
- struct h8300_coff_link_hash_table *htab;
-
- /* Add the symbols using the generic code. */
- _bfd_generic_link_add_symbols (abfd, info);
-
- if (info->output_bfd->xvec != abfd->xvec)
- return TRUE;
-
- htab = h8300_coff_hash_table (info);
-
- /* If we haven't created a vectors section, do so now. */
- if (!htab->vectors_sec)
- {
- flagword flags;
-
- /* Make sure the appropriate flags are set, including SEC_IN_MEMORY. */
- flags = (SEC_ALLOC | SEC_LOAD
- | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_READONLY);
- htab->vectors_sec = bfd_make_section_with_flags (abfd, ".vectors",
- flags);
-
- /* If the section wasn't created, or we couldn't set the flags,
- quit quickly now, rather than dying a painful death later. */
- if (!htab->vectors_sec)
- return FALSE;
-
- /* Also create the vector hash table. */
- amt = sizeof (struct funcvec_hash_table);
- funcvec_hash_table = (struct funcvec_hash_table *) bfd_alloc (abfd, amt);
-
- if (!funcvec_hash_table)
- return FALSE;
-
- /* And initialize the funcvec hash table. */
- if (!funcvec_hash_table_init (funcvec_hash_table, abfd,
- funcvec_hash_newfunc,
- sizeof (struct funcvec_hash_entry)))
- {
- bfd_release (abfd, funcvec_hash_table);
- return FALSE;
- }
-
- /* Store away a pointer to the funcvec hash table. */
- htab->funcvec_hash_table = funcvec_hash_table;
- }
-
- /* Load up the function vector hash table. */
- funcvec_hash_table = htab->funcvec_hash_table;
-
- /* Now scan the relocs for all the sections in this bfd; create
- additional space in the .vectors section as needed. */
- for (sec = abfd->sections; sec; sec = sec->next)
- {
- long reloc_size, reloc_count, i;
- asymbol **symbols;
- arelent **relocs;
-
- /* Suck in the relocs, symbols & canonicalize them. */
- reloc_size = bfd_get_reloc_upper_bound (abfd, sec);
- if (reloc_size <= 0)
- continue;
-
- relocs = (arelent **) bfd_malloc ((bfd_size_type) reloc_size);
- if (!relocs)
- return FALSE;
-
- /* The symbols should have been read in by _bfd_generic link_add_symbols
- call abovec, so we can cheat and use the pointer to them that was
- saved in the above call. */
- symbols = _bfd_generic_link_get_symbols(abfd);
- reloc_count = bfd_canonicalize_reloc (abfd, sec, relocs, symbols);
- if (reloc_count <= 0)
- {
- free (relocs);
- continue;
- }
-
- /* Now walk through all the relocations in this section. */
- for (i = 0; i < reloc_count; i++)
- {
- arelent *reloc = relocs[i];
- asymbol *symbol = *(reloc->sym_ptr_ptr);
- const char *name;
-
- /* We've got an indirect reloc. See if we need to add it
- to the function vector table. At this point, we have
- to add a new entry for each unique symbol referenced
- by an R_MEM_INDIRECT relocation except for a reloc
- against the absolute section symbol. */
- if (reloc->howto->type == R_MEM_INDIRECT
- && symbol != bfd_abs_section_ptr->symbol)
-
- {
- struct funcvec_hash_table *ftab;
- struct funcvec_hash_entry *h;
-
- name = symbol->name;
- if (symbol->flags & BSF_LOCAL)
- {
- char *new_name;
-
- new_name = bfd_malloc ((bfd_size_type) strlen (name) + 10);
- if (new_name == NULL)
- abort ();
-
- sprintf (new_name, "%s_%08x", name, symbol->section->id);
- name = new_name;
- }
-
- /* Look this symbol up in the function vector hash table. */
- ftab = htab->funcvec_hash_table;
- h = funcvec_hash_lookup (ftab, name, FALSE, FALSE);
-
- /* If this symbol isn't already in the hash table, add
- it and bump up the size of the hash table. */
- if (h == NULL)
- {
- h = funcvec_hash_lookup (ftab, name, TRUE, TRUE);
- if (h == NULL)
- {
- free (relocs);
- return FALSE;
- }
-
- /* Bump the size of the vectors section. Each vector
- takes 2 bytes on the h8300 and 4 bytes on the h8300h. */
- switch (bfd_get_mach (abfd))
- {
- case bfd_mach_h8300:
- case bfd_mach_h8300hn:
- case bfd_mach_h8300sn:
- htab->vectors_sec->size += 2;
- break;
- case bfd_mach_h8300h:
- case bfd_mach_h8300s:
- htab->vectors_sec->size += 4;
- break;
- default:
- abort ();
- }
- }
- }
- }
-
- /* We're done with the relocations, release them. */
- free (relocs);
- }
-
- /* Now actually allocate some space for the function vector. It's
- wasteful to do this more than once, but this is easier. */
- sec = htab->vectors_sec;
- if (sec->size != 0)
- {
- /* Free the old contents. */
- if (sec->contents)
- free (sec->contents);
-
- /* Allocate new contents. */
- sec->contents = bfd_malloc (sec->size);
- }
-
- return TRUE;
-}
-
-#define coff_reloc16_extra_cases h8300_reloc16_extra_cases
-#define coff_reloc16_estimate h8300_reloc16_estimate
-#define coff_bfd_link_add_symbols h8300_bfd_link_add_symbols
-#define coff_bfd_link_hash_table_create h8300_coff_link_hash_table_create
-
-#define COFF_LONG_FILENAMES
-
-#ifndef bfd_pe_print_pdata
-#define bfd_pe_print_pdata NULL
-#endif
-
-#include "coffcode.h"
-
-#undef coff_bfd_get_relocated_section_contents
-#undef coff_bfd_relax_section
-#define coff_bfd_get_relocated_section_contents \
- bfd_coff_reloc16_get_relocated_section_contents
-#define coff_bfd_relax_section bfd_coff_reloc16_relax_section
-
-CREATE_BIG_COFF_TARGET_VEC (h8300_coff_vec, "coff-h8300", BFD_IS_RELAXABLE, 0, '_', NULL, COFF_SWAP_TABLE)
break;
#endif
-#ifdef H8300MAGIC
- case H8300MAGIC:
- arch = bfd_arch_h8300;
- machine = bfd_mach_h8300;
- /* !! FIXME this probably isn't the right place for this. */
- abfd->flags |= BFD_IS_RELAXABLE;
- break;
-#endif
-
-#ifdef H8300HMAGIC
- case H8300HMAGIC:
- arch = bfd_arch_h8300;
- machine = bfd_mach_h8300h;
- /* !! FIXME this probably isn't the right place for this. */
- abfd->flags |= BFD_IS_RELAXABLE;
- break;
-#endif
-
-#ifdef H8300SMAGIC
- case H8300SMAGIC:
- arch = bfd_arch_h8300;
- machine = bfd_mach_h8300s;
- /* !! FIXME this probably isn't the right place for this. */
- abfd->flags |= BFD_IS_RELAXABLE;
- break;
-#endif
-
-#ifdef H8300HNMAGIC
- case H8300HNMAGIC:
- arch = bfd_arch_h8300;
- machine = bfd_mach_h8300hn;
- /* !! FIXME this probably isn't the right place for this. */
- abfd->flags |= BFD_IS_RELAXABLE;
- break;
-#endif
-
-#ifdef H8300SNMAGIC
- case H8300SNMAGIC:
- arch = bfd_arch_h8300;
- machine = bfd_mach_h8300sn;
- /* !! FIXME this probably isn't the right place for this. */
- abfd->flags |= BFD_IS_RELAXABLE;
- break;
-#endif
-
#ifdef SH_ARCH_MAGIC_BIG
case SH_ARCH_MAGIC_BIG:
case SH_ARCH_MAGIC_LITTLE:
return TRUE;
#endif
-#ifdef H8300MAGIC
- case bfd_arch_h8300:
- switch (bfd_get_mach (abfd))
- {
- case bfd_mach_h8300: *magicp = H8300MAGIC; return TRUE;
- case bfd_mach_h8300h: *magicp = H8300HMAGIC; return TRUE;
- case bfd_mach_h8300s: *magicp = H8300SMAGIC; return TRUE;
- case bfd_mach_h8300hn: *magicp = H8300HNMAGIC; return TRUE;
- case bfd_mach_h8300sn: *magicp = H8300SNMAGIC; return TRUE;
- default: break;
- }
- break;
-#endif
-
#ifdef SH_ARCH_MAGIC_BIG
case bfd_arch_sh:
#ifdef COFF_IMAGE_WITH_PE
arm-epoc-pe* | \
arm*-*-aout | \
arm*-*-coff | \
- h8300*-*-coff | \
h8500*-*-coff | \
i[3-7]86-*-sco3.2v5*coff | \
i[3-7]86-*-sysv4* | i[3-7]86-*-unixware* | \
*-*-rtemscoff* | \
a29k-* | \
arm-*-oabi | \
+ h8300*-*-coff | \
hppa*-*-rtems* | \
i860-*-* | \
i960-*-* | \
targ_defvec=h8300_elf32_linux_vec
;;
- h8300*-*-*)
- targ_defvec=h8300_coff_vec
- targ_underscore=yes
- ;;
-
h8500-*-*)
targ_defvec=h8500_coff_vec
targ_underscore=yes
fr30_elf32_vec) tb="$tb elf32-fr30.lo elf32.lo $elf" ;;
frv_elf32_vec) tb="$tb elf32-frv.lo elf32.lo $elf" ;;
frv_elf32_fdpic_vec) tb="$tb elf32-frv.lo elf32.lo $elf" ;;
- h8300_coff_vec) tb="$tb coff-h8300.lo reloc16.lo $coffgen" ;;
h8300_elf32_vec) tb="$tb elf32-h8300.lo elf32.lo $elf" ;;
h8300_elf32_linux_vec) tb="$tb elf32-h8300.lo elf32.lo $elf" ;;
h8500_coff_vec) tb="$tb coff-h8500.lo reloc16.lo $coffgen" ;;
fr30_elf32_vec) tb="$tb elf32-fr30.lo elf32.lo $elf" ;;
frv_elf32_vec) tb="$tb elf32-frv.lo elf32.lo $elf" ;;
frv_elf32_fdpic_vec) tb="$tb elf32-frv.lo elf32.lo $elf" ;;
- h8300_coff_vec) tb="$tb coff-h8300.lo reloc16.lo $coffgen" ;;
h8300_elf32_vec) tb="$tb elf32-h8300.lo elf32.lo $elf" ;;
h8300_elf32_linux_vec) tb="$tb elf32-h8300.lo elf32.lo $elf" ;;
h8500_coff_vec) tb="$tb coff-h8500.lo reloc16.lo $coffgen" ;;
coff-aux.c
coff-bfd.c
coff-go32.c
-coff-h8300.c
coff-h8500.c
coff-i386.c
coff-m68k.c
/* Most of this hacked by Steve Chamberlain <sac@cygnus.com>. */
-/* These routines are used by coff-h8300 and coff-z8k to do
- relocation.
+/* These routines are used by coff-z8k to do relocation.
FIXME: This code should be rewritten to support the new COFF
linker. Basically, they need to deal with COFF relocs rather than
extern const bfd_target fr30_elf32_vec;
extern const bfd_target frv_elf32_vec;
extern const bfd_target frv_elf32_fdpic_vec;
-extern const bfd_target h8300_coff_vec;
extern const bfd_target h8300_elf32_vec;
extern const bfd_target h8300_elf32_linux_vec;
extern const bfd_target h8500_coff_vec;
&frv_elf32_vec,
&frv_elf32_fdpic_vec,
- &h8300_coff_vec,
&h8300_elf32_vec,
&h8300_elf32_linux_vec,
&h8500_coff_vec,
2018-04-16 Alan Modra <amodra@gmail.com>
+ * testsuite/binutils-all/objcopy.exp: Remove h8300-coff support.
+
+2018-04-16 Alan Modra <amodra@gmail.com>
+
* Makefile.am: Remove IEEE 695 support.
* budbg.h: Likewise.
* doc/binutils.texi: Likewise.
# files in the first place, and may order things a little
# differently. Those systems should use setup_xfail here.
- setup_xfail "h8300-*-coff"
setup_xfail "h8500-*-rtems*" "h8500-*-coff"
setup_xfail "hppa*-*-*"
setup_xfail "m68*-*-*coff" "m68*-*-hpux*" "m68*-*-lynxos*"
2018-04-16 Alan Modra <amodra@gmail.com>
+ * config/obj-coff.h: Remove h8300-coff support.
+ * config/tc-h8300.c: Likewise.
+ * config/tc-h8300.h: Likewise.
+ * testsuite/gas/h8300/h8300.exp: Likewise.
+ * testsuite/gas/h8300/branch-coff.s: Delete.
+ * testsuite/gas/h8300/branchh-coff.s: Delete.
+ * testsuite/gas/h8300/branchs-coff.s: Delete.
+ * testsuite/gas/h8300/ffxx1-coff.d: Delete.
+ * testsuite/gas/h8300/ffxx1-coff.s: Delete.
+ * testsuite/gas/h8300/h8300-coff.exp: Delete.
+
+2018-04-16 Alan Modra <amodra@gmail.com>
+
* app.c: Remove IEEE 695 support.
* symbols.c: Likewise.
#define TARGET_FORMAT "coff-z8k"
#endif
-#ifdef TC_H8300
-#include "coff/h8300.h"
-#define TARGET_FORMAT "coff-h8300"
-#endif
-
#ifdef TC_H8500
#include "coff/h8500.h"
#define TARGET_FORMAT "coff-h8500"
#define h8_opcodes ops
#include "opcode/h8300.h"
#include "safe-ctype.h"
-
-#ifdef OBJ_ELF
#include "elf/h8.h"
-#endif
const char comment_chars[] = ";";
const char line_comment_chars[] = "#";
{"page", listing_eject, 0},
{"program", s_ignore, 0},
-#ifdef OBJ_ELF
{"section", h8300_elf_section, 0},
{"section.s", h8300_elf_section, 0},
{"sect", h8300_elf_section, 0},
{"sect.s", h8300_elf_section, 0},
-#endif
{0, 0, 0}
};
check_operand (operand, 0xffff, t);
bytes[0] |= operand->exp.X_add_number >> 8;
bytes[1] |= operand->exp.X_add_number >> 0;
-#ifdef OBJ_ELF
/* MOVA needs both relocs to relax the second operand properly. */
if (relaxmode != 0
&& (OP_KIND(this_try->opcode->how) == O_MOVAB
idx = BFD_RELOC_16;
fix_new_exp (frag_now, offset, 2, &operand->exp, 0, idx);
}
-#endif
break;
case L_24:
check_operand (operand, 0xffffff, t);
bytes[3] |= operand->exp.X_add_number >> 0;
if (relaxmode != 0)
{
-#ifdef OBJ_ELF
if ((operand->mode & MODE) == DISP && relaxmode == 1)
idx = BFD_RELOC_H8_DISP32A16;
else
-#endif
idx = (relaxmode == 2) ? R_MOV24B1 : R_MOVL1;
fix_new_exp (frag_now, offset, 4, &operand->exp, 0, idx);
}
case L_32:
size = 4;
where = (operand->mode & SIZE) == L_24 ? -1 : 0;
-#ifdef OBJ_ELF
if ((operand->mode & MODE) == DISP && relaxmode == 1)
idx = BFD_RELOC_H8_DISP32A16;
- else
-#endif
- if (relaxmode == 2)
+ else if (relaxmode == 2)
idx = R_MOV24B1;
else if (relaxmode == 1)
idx = R_MOVL1;
int x_mode = x & MODE;
if (x_mode == IMM || x_mode == DISP)
- {
-#ifndef OBJ_ELF
- /* Remove MEMRELAX flag added in h8300.h on mov with
- addressing mode "register indirect with displacement". */
- if (x_mode == DISP)
- x &= ~MEMRELAX;
-#endif
- do_a_fix_imm (output - frag_now->fr_literal + op_at[i] / 2,
- op_at[i] & 1, operand + i, (x & MEMRELAX) != 0,
- this_try);
- }
+ do_a_fix_imm (output - frag_now->fr_literal + op_at[i] / 2,
+ op_at[i] & 1, operand + i, (x & MEMRELAX) != 0,
+ this_try);
else if (x_mode == ABS)
do_a_fix_imm (output - frag_now->fr_literal + op_at[i] / 2,
op_at[i] & 1, operand + i,
if (operand[i].exp.X_add_number & 1)
as_warn (_("branch operand has odd offset (%lx)\n"),
(unsigned long) operand->exp.X_add_number);
-#ifndef OBJ_ELF
- /* The COFF port has always been off by one, changing it
- now would be an incompatible change, so we leave it as-is.
-
- We don't want to do this for ELF as we want to be
- compatible with the proposed ELF format from Hitachi. */
- operand[i].exp.X_add_number -= 1;
-#endif
if (size16)
{
operand[i].exp.X_add_number =
int where = 0;
bfd_reloc_code_real_type reloc_type = R_JMPL1;
-#ifdef OBJ_ELF
/* To be compatible with the proposed H8 ELF format, we
want the relocation's offset to point to the first byte
that will be modified, not to the start of the instruction. */
}
else
where = 1;
-#endif
/* This jmp may be a jump or a branch. */
/* Fixup debug sections since we will never relax them. */
#define TC_LINKRELAX_FIXUP(seg) (seg->flags & SEC_ALLOC)
-#ifdef OBJ_ELF
#ifndef TE_LINUX
#define TARGET_FORMAT "elf32-h8300"
#else
#define LOCAL_LABEL_PREFIX '.'
#define LOCAL_LABEL(NAME) (NAME[0] == '.' && NAME[1] == 'L')
#define FAKE_LABEL_NAME ".L0\001"
-#endif
struct fix;
struct internal_reloc;
#define WORKING_DOT_WORD
-#define COFF_MAGIC ( Smode && Nmode ? 0x8304 : Hmode && Nmode ? 0x8303 : Smode ? 0x8302 : Hmode ? 0x8301 : 0x8300)
-#define IGNORE_NONSTANDARD_ESCAPES
-
-#define tc_coff_symbol_emit_hook(a) ; /* not used */
-
/* No shared lib support, so we don't need to ensure externally
visible symbols can be overridden. */
#define EXTERN_FORCE_RELOC 0
#define DWARF2_LINE_MIN_INSN_LENGTH 2
#define DWARF2_USE_FIXED_ADVANCE_PC 0
-#ifdef OBJ_ELF
/* Provide mappings from the original H8 COFF relocation names to
- their corresponding BFD relocation names. This allows us to use
- most of tc-h8300.c without modifications for both ELF and COFF
- ports. */
+ their corresponding BFD relocation names. */
#define R_MOV24B1 BFD_RELOC_H8_DIR24A8
#define R_MOVL1 BFD_RELOC_H8_DIR32A16
#define R_RELLONG BFD_RELOC_32
/* We do not want to adjust any relocations to make implementation of
linker relaxations easier. */
#define tc_fix_adjustable(FIX) 0
-#endif
#define LISTING_HEADER "Renesas H8/300 GAS "
-#ifndef OBJ_ELF
-#define RELOC_32 1234
-#endif
extern int Hmode;
extern int Smode;
+++ /dev/null
- .text
-h8300_branches:
- bsr h8300_branches
- jmp h8300_branches
- jmp @r0
- jmp @@16:8
- jsr h8300_branches
- jsr @r0
- jsr @@16:8
-
+++ /dev/null
- .h8300h
- .text
-h8300h_branches:
- bsr h8300h_branches:8
- bsr h8300h_branches:16
- jmp h8300h_branches
- jmp @er0
- jmp @@16:8
- jsr h8300h_branches
- jsr @er0
- jsr @@16:8
-
+++ /dev/null
- .h8300s
- .text
-h8300s_branches:
- bsr h8300s_branches:8
- bsr h8300s_branches:16
- jmp h8300s_branches
- jmp @er0
- jmp @@16:8
- jsr h8300s_branches
- jsr @er0
- jsr @@16:8
-
+++ /dev/null
-#objdump: --prefix-addresses -dr
-#name: FFxx1
-
-# Test for FFxx:8 addressing.
-
-.*: file format .*h8300.*
-
-Disassembly of section .text:
- ...
- 0: 16 main
-0+0400 <main>.*mov.b #0x7f,r0l
-0+0402 <.*>.*mov.b @0xbb:8,r0l
-0+0404 <.*>.*mov.b r0l,@0xffb9:16
-0+0408 <.*>.*mov.b #0x1,r0l
-0+040a <loop>.*mov.b r0l,@0xffbb:16
-0+040e <delay>.*mov.w #0x0,r1
-0+0412 <deloop>.*adds #1,r1
-0+0414 <.*>.*bne .0 \(0x416\)
- 415: DISP8 deloop[+]0xffffffff
-0+0416 <.*>.*rotl.b r0l
-0+0418 <.*>.*bra .0 \(0x41a\)
- 419: DISP8 loop[+]0xffffffff
- ...
+++ /dev/null
- .equ p6ddr, 0xffb9 ;0x7f for output
- .equ p6dr, 0xffbb
- .equ seed, 0x01
- .text
- .org 0
-reset: .word main ;reset vector
-;
- .org 0x400
-main: mov.b #0x7f,r0l ;port 6 ddr = 7F
- mov.b @0xffbb:8,r0l ;***test***
- mov.b r0l,@p6ddr:16
-;
- mov.b #seed,r0l ;start with 0000001
-loop: mov.b r0l,@p6dr:16 ;output to port 6
-delay: mov.w #0x0000,r1
-deloop: adds #1,r1
- bne deloop:8 ;not = 0
- rotl r0l
- bra loop:8
- .word 0
+++ /dev/null
-# Copyright (C) 2012-2018 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
-
-#
-# Some H8/300 coff tests
-#
-proc do_h8300_cbranch {} {
- set testname "cbranch.s: h8300 conditional branch tests"
- set x 0
-
- gas_start "cbranch.s" "-al"
-
- # Check each instruction bit pattern to verify it got
- # assembled correctly.
- while 1 {
- expect {
- -re " +\[0-9\]+ 0000 4000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0002 4000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0004 4100\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0006 4100\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0008 4200\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000a 4300\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000c 4400\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000e 4400\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0010 4500\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0012 4500\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0014 4600\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0016 4700\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0018 4800\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 001a 4900\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 001c 4A00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 001e 4B00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0020 4C00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0022 4D00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0024 4E00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0026 4F00\[^\n\]*\n" { set x [expr $x+1] }
- timeout { perror "timeout\n; break }
- eof { break }
- }
- }
-
- # This was intended to do any cleanup necessary. It kinda looks like it
- # isn't needed, but just in case, please keep it in for now.
- gas_finish
-
- # Did we find what we were looking for? If not, flunk it.
- if [expr $x == 20] then { pass $testname } else { fail $testname }
-}
-
-proc do_h8300_branch {} {
- set testname "branch.s: h8300 branch tests"
- set x 0
-
- gas_start "branch-coff.s" "-al"
-
- # Check each instruction bit pattern to verify it got
- # assembled correctly.
- while 1 {
- expect {
- -re " +\[0-9\]+ 0000 5500\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0002 5A000000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0006 5900\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0008 5B00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000a 5E000000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000e 5D00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0010 5F00\[^\n\]*\n" { set x [expr $x+1] }
- timeout { perror "timeout\n; break }
- eof { break }
- }
- }
-
- # This was intended to do any cleanup necessary. It kinda looks like it
- # isn't needed, but just in case, please keep it in for now.
- gas_finish
-
- # Did we find what we were looking for? If not, flunk it.
- if [expr $x == 7] then { pass $testname } else { fail $testname }
-}
-
-proc do_h8300h_cbranch {} {
- set testname "cbranchh.s: h8300h conditional branch tests"
- set x 0
-
- gas_start "cbranchh.s" "-al"
-
- # Check each instruction bit pattern to verify it got
- # assembled correctly.
- while 1 {
- expect {
- -re " +\[0-9\]+ 0000 4000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0002 4000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0004 4100\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0006 4100\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0008 4200\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000a 4300\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000c 4400\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000e 4400\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0010 4500\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0012 4500\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0014 4600\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0016 4700\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0018 4800\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 001a 4900\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 001c 4A00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 001e 4B00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0020 4C00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0022 4D00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0024 4E00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0026 4F00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0028 58000000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 002c 58000000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0030 58100000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0034 58100000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0038 58200000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 003c 58300000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0040 58400000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0044 58400000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0048 58500000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 004c 58500000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0050 58600000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0054 58700000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0058 58800000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 005c 58900000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0060 58A00000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0064 58B00000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0068 58C00000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 006c 58D00000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0070 58E00000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0074 58F00000\[^\n\]*\n" { set x [expr $x+1] }
- timeout { perror "timeout\n; break }
- eof { break }
- }
- }
-
- # This was intended to do any cleanup necessary. It kinda looks like it
- # isn't needed, but just in case, please keep it in for now.
- gas_finish
-
- # Did we find what we were looking for? If not, flunk it.
- if [expr $x == 40] then { pass $testname } else { fail $testname }
-}
-
-proc do_h8300h_branch {} {
- set testname "branchh.s: h8300h branch tests"
- set x 0
-
- gas_start "branchh-coff.s" "-al"
-
- # Check each instruction bit pattern to verify it got
- # assembled correctly.
- while 1 {
- expect {
- -re " +\[0-9\]+ 0000 5500\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0002 5C000000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0006 5A000000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000a 5900\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000c 5B00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000e 5E000000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0012 5D00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0014 5F00\[^\n\]*\n" { set x [expr $x+1] }
- timeout { perror "timeout\n; break }
- eof { break }
- }
- }
-
- # This was intended to do any cleanup necessary. It kinda looks like it
- # isn't needed, but just in case, please keep it in for now.
- gas_finish
-
- # Did we find what we were looking for? If not, flunk it.
- if [expr $x == 8] then { pass $testname } else { fail $testname }
-}
-
-proc do_h8300s_cbranch {} {
- set testname "cbranchs.s: h8300s conditional branch tests"
- set x 0
-
- gas_start "cbranchs.s" "-al"
-
- # Check each instruction bit pattern to verify it got
- # assembled correctly.
- while 1 {
- expect {
- -re " +\[0-9\]+ 0000 4000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0002 4000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0004 4100\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0006 4100\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0008 4200\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000a 4300\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000c 4400\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000e 4400\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0010 4500\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0012 4500\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0014 4600\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0016 4700\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0018 4800\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 001a 4900\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 001c 4A00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 001e 4B00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0020 4C00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0022 4D00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0024 4E00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0026 4F00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0028 58000000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 002c 58000000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0030 58100000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0034 58100000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0038 58200000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 003c 58300000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0040 58400000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0044 58400000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0048 58500000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 004c 58500000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0050 58600000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0054 58700000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0058 58800000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 005c 58900000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0060 58A00000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0064 58B00000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0068 58C00000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 006c 58D00000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0070 58E00000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0074 58F00000\[^\n\]*\n" { set x [expr $x+1] }
- timeout { perror "timeout\n; break }
- eof { break }
- }
- }
-
- # This was intended to do any cleanup necessary. It kinda looks like it
- # isn't needed, but just in case, please keep it in for now.
- gas_finish
-
- # Did we find what we were looking for? If not, flunk it.
- if [expr $x == 40] then { pass $testname } else { fail $testname }
-}
-
-proc do_h8300s_branch {} {
- set testname "branchs.s: h8300s branch tests"
- set x 0
-
- gas_start "branchs-coff.s" "-al"
-
- # Check each instruction bit pattern to verify it got
- # assembled correctly.
- while 1 {
- expect {
- -re " +\[0-9\]+ 0000 5500\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0002 5C000000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0006 5A000000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000a 5900\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000c 5B00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 000e 5E000000\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0012 5D00\[^\n\]*\n" { set x [expr $x+1] }
- -re " +\[0-9\]+ 0014 5F00\[^\n\]*\n" { set x [expr $x+1] }
- timeout { perror "timeout\n; break }
- eof { break }
- }
- }
-
- # This was intended to do any cleanup necessary. It kinda looks like it
- # isn't needed, but just in case, please keep it in for now.
- gas_finish
-
- # Did we find what we were looking for? If not, flunk it.
- if [expr $x == 8] then { pass $testname } else { fail $testname }
-}
-
-if { [istarget h8300*-*-coff]
- || [istarget h8300*-*-hms*]
- || [istarget h8300*-*-rtemscoff*] } then {
-
- # Test the basic h8300 instruction parser
- do_h8300_cbranch
- do_h8300_branch
-
- # Now test the h8300h instruction parser
- do_h8300h_cbranch
- do_h8300h_branch
-
- # Now test the h8300s instruction parser
- do_h8300s_cbranch
- do_h8300s_branch
-
- # Now some random tests
- run_dump_test "ffxx1-coff"
-}
do_h8300h_mov32bug
# Now some random tests
- set svr4pic [expr [istarget *-*-elf*] || [istarget *-*-irix5*] ]
- set empic [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
- set aout [expr [istarget *-*-bsd*] || [istarget *-*-netbsd*]]
-
gas_test "cmpsi2.s" "" "" "cmpsi2.s"
run_dump_test "pr3134"
2018-04-16 Alan Modra <amodra@gmail.com>
+ * coff/h8300.h: Delete.
+
+2018-04-16 Alan Modra <amodra@gmail.com>
+
* ieee.h: Delete.
2018-04-16 Alan Modra <amodra@gmail.com>
+++ /dev/null
-/* coff information for Renesas H8/300 and H8/300-H
-
- Copyright (C) 2001-2018 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
- MA 02110-1301, USA. */
-
-#define L_LNNO_SIZE 4
-#include "coff/external.h"
-
-#define H8300MAGIC 0x8300
-#define H8300HMAGIC 0x8301
-#define H8300SMAGIC 0x8302
-#define H8300HNMAGIC 0x8303
-#define H8300SNMAGIC 0x8304
-
-#define H8300BADMAG(x) (((x).f_magic != H8300MAGIC))
-#define H8300HBADMAG(x) (((x).f_magic != H8300HMAGIC))
-#define H8300SBADMAG(x) (((x).f_magic != H8300SMAGIC))
-#define H8300HNBADMAG(x) (((x).f_magic != H8300HNMAGIC))
-#define H8300SNBADMAG(x) (((x).f_magic != H8300SNMAGIC))
-
-/* Relocation directives. */
-
-/* The external reloc has an offset field, because some of the reloc
- types on the h8 don't have room in the instruction for the entire
- offset - eg the strange jump and high page addressing modes. */
-
-struct external_reloc
-{
- char r_vaddr[4];
- char r_symndx[4];
- char r_offset[4];
- char r_type[2];
- char r_stuff[2];
-};
-
-#define RELOC struct external_reloc
-#define RELSZ 16
-
-
-
-
2018-04-16 Alan Modra <amodra@gmail.com>
+ * Makefile.am: Remove h8300-coff support.
+ * configure.tgt: Likewise.
+ * testsuite/ld-h8300/h8300.exp: Likewise.
+ * emulparams/h8300.sh: Delete.
+ * emulparams/h8300h.sh: Delete.
+ * emulparams/h8300hn.sh: Delete.
+ * emulparams/h8300s.sh: Delete.
+ * emulparams/h8300sn.sh: Delete.
+ * emulparams/h8300sx.sh: Delete.
+ * emulparams/h8300sxn.sh: Delete.
+ * scripttempl/h8300.sc: Delete.
+ * scripttempl/h8300h.sc: Delete.
+ * scripttempl/h8300hn.sc: Delete.
+ * scripttempl/h8300s.sc: Delete.
+ * scripttempl/h8300sn.sc: Delete.
+ * scripttempl/h8300sx.sc: Delete.
+ * scripttempl/h8300sxn.sc: Delete.
+ * testsuite/ld-h8300/relax-3-coff.d: Delete.
+ * testsuite/ld-h8300/relax-4-coff.d: Delete.
+ * testsuite/ld-h8300/relax-5-coff.d: Delete.
+ * testsuite/ld-h8300/relax-6-coff.d: Delete.
+ * Makefile.in: Regenerate.
+ * po/BLD-POTFILES.in: Regenerate.
+
+2018-04-16 Alan Modra <amodra@gmail.com>
+
* ld.texinfo: Remove IEEE 695 support.
* mri.c: Likewise.
eelf_i386_vxworks.c \
eelf_iamcu.c \
eelf_s390.c \
- eh8300.c \
eh8300elf.c \
eh8300elf_linux.c \
- eh8300h.c \
eh8300helf.c \
eh8300helf_linux.c \
- eh8300hn.c \
eh8300hnelf.c \
- eh8300s.c \
eh8300self.c \
eh8300self_linux.c \
- eh8300sn.c \
eh8300snelf.c \
- eh8300sx.c \
eh8300sxelf.c \
eh8300sxelf_linux.c \
- eh8300sxn.c \
eh8300sxnelf.c \
eh8500.c \
eh8500b.c \
eelf_s390.c: $(srcdir)/emulparams/elf_s390.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300.c: $(srcdir)/emulparams/h8300.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300.sc ${GEN_DEPENDS}
-
eh8300elf.c: $(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
eh8300elf_linux.c: $(srcdir)/emulparams/h8300elf_linux.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300h.c: $(srcdir)/emulparams/h8300h.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300h.sc ${GEN_DEPENDS}
-
eh8300helf.c: $(srcdir)/emulparams/h8300helf.sh \
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
$(srcdir)/emulparams/h8300elf_linux.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300hn.c: $(srcdir)/emulparams/h8300hn.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300hn.sc ${GEN_DEPENDS}
-
eh8300hnelf.c: $(srcdir)/emulparams/h8300hnelf.sh \
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300s.c: $(srcdir)/emulparams/h8300s.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300s.sc ${GEN_DEPENDS}
-
eh8300self.c: $(srcdir)/emulparams/h8300self.sh \
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300sn.c: $(srcdir)/emulparams/h8300sn.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300sn.sc ${GEN_DEPENDS}
-
eh8300snelf.c: $(srcdir)/emulparams/h8300snelf.sh \
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300sx.c: $(srcdir)/emulparams/h8300sx.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300sx.sc ${GEN_DEPENDS}
-
eh8300sxelf.c: $(srcdir)/emulparams/h8300sxelf.sh \
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300sxn.c: $(srcdir)/emulparams/h8300sxn.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300sxn.sc ${GEN_DEPENDS}
-
eh8300sxnelf.c: $(srcdir)/emulparams/h8300sxnelf.sh \
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
eelf_i386_vxworks.c \
eelf_iamcu.c \
eelf_s390.c \
- eh8300.c \
eh8300elf.c \
eh8300elf_linux.c \
- eh8300h.c \
eh8300helf.c \
eh8300helf_linux.c \
- eh8300hn.c \
eh8300hnelf.c \
- eh8300s.c \
eh8300self.c \
eh8300self_linux.c \
- eh8300sn.c \
eh8300snelf.c \
- eh8300sx.c \
eh8300sxelf.c \
eh8300sxelf_linux.c \
- eh8300sxn.c \
eh8300sxnelf.c \
eh8500.c \
eh8500b.c \
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf_x86_64_fbsd.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf_x86_64_nacl.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf_x86_64_sol2.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300elf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300elf_linux.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300h.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300helf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300helf_linux.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300hn.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300hnelf.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300s.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300self.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300self_linux.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300sn.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300snelf.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300sx.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300sxelf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300sxelf_linux.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300sxn.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300sxnelf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8500.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8500b.Po@am__quote@
eelf_s390.c: $(srcdir)/emulparams/elf_s390.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300.c: $(srcdir)/emulparams/h8300.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300.sc ${GEN_DEPENDS}
-
eh8300elf.c: $(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
eh8300elf_linux.c: $(srcdir)/emulparams/h8300elf_linux.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300h.c: $(srcdir)/emulparams/h8300h.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300h.sc ${GEN_DEPENDS}
-
eh8300helf.c: $(srcdir)/emulparams/h8300helf.sh \
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
$(srcdir)/emulparams/h8300elf_linux.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300hn.c: $(srcdir)/emulparams/h8300hn.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300hn.sc ${GEN_DEPENDS}
-
eh8300hnelf.c: $(srcdir)/emulparams/h8300hnelf.sh \
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300s.c: $(srcdir)/emulparams/h8300s.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300s.sc ${GEN_DEPENDS}
-
eh8300self.c: $(srcdir)/emulparams/h8300self.sh \
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300sn.c: $(srcdir)/emulparams/h8300sn.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300sn.sc ${GEN_DEPENDS}
-
eh8300snelf.c: $(srcdir)/emulparams/h8300snelf.sh \
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300sx.c: $(srcdir)/emulparams/h8300sx.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300sx.sc ${GEN_DEPENDS}
-
eh8300sxelf.c: $(srcdir)/emulparams/h8300sxelf.sh \
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-eh8300sxn.c: $(srcdir)/emulparams/h8300sxn.sh \
- $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300sxn.sc ${GEN_DEPENDS}
-
eh8300sxnelf.c: $(srcdir)/emulparams/h8300sxnelf.sh \
$(srcdir)/emulparams/h8300elf.sh \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
;;
moxie-*-*) targ_emul=elf32moxie
;;
-h8300-*-hms* | h8300-*-coff*)
- targ_emul=h8300; targ_extra_emuls="h8300h h8300s h8300hn h8300sn h8300sx h8300sxn" ;;
h8300-*-elf* | h8300-*-rtems*)
targ_emul=h8300elf;
targ_extra_emuls="h8300helf h8300self h8300hnelf h8300snelf h8300sxelf h8300sxnelf" ;;
+++ /dev/null
-SCRIPT_NAME=h8300
-OUTPUT_FORMAT="coff-h8300"
-TEXT_START_ADDR=0x8000
-TARGET_PAGE_SIZE=128
-ARCH=h8300
-TINY_READONLY_SECTION=".tinyrodata :
- {
- *(.tinyrodata)
- } =0"
-TINY_DATA_SECTION=".tinydata 0xff8000 :
- {
- *(.tinydata)
- ${RELOCATING+ _tinydata = .; }
- }"
-TINY_BSS_SECTION=".tinybss : AT (_tinydata)
- {
- *(.tinybss)
- }"
+++ /dev/null
-SCRIPT_NAME=h8300h
-OUTPUT_FORMAT="coff-h8300"
-TEXT_START_ADDR=0x8000
-TARGET_PAGE_SIZE=128
-ARCH=h8300
+++ /dev/null
-SCRIPT_NAME=h8300hn
-OUTPUT_FORMAT="coff-h8300"
-TEXT_START_ADDR=0x8000
-TARGET_PAGE_SIZE=128
-ARCH=h8300
+++ /dev/null
-SCRIPT_NAME=h8300s
-OUTPUT_FORMAT="coff-h8300"
-TEXT_START_ADDR=0x8000
-TARGET_PAGE_SIZE=128
-ARCH=h8300
+++ /dev/null
-SCRIPT_NAME=h8300sn
-OUTPUT_FORMAT="coff-h8300"
-TEXT_START_ADDR=0x8000
-TARGET_PAGE_SIZE=128
-ARCH=h8300
+++ /dev/null
-SCRIPT_NAME=h8300sx
-OUTPUT_FORMAT="coff-h8300"
-TEXT_START_ADDR=0x8000
-TARGET_PAGE_SIZE=128
-ARCH=h8300
+++ /dev/null
-SCRIPT_NAME=h8300sxn
-OUTPUT_FORMAT="coff-h8300"
-TEXT_START_ADDR=0x8000
-TARGET_PAGE_SIZE=128
-ARCH=h8300
eelf_x86_64_fbsd.c
eelf_x86_64_nacl.c
eelf_x86_64_sol2.c
-eh8300.c
eh8300elf.c
eh8300elf_linux.c
-eh8300h.c
eh8300helf.c
eh8300helf_linux.c
-eh8300hn.c
eh8300hnelf.c
-eh8300s.c
eh8300self.c
eh8300self_linux.c
-eh8300sn.c
eh8300snelf.c
-eh8300sx.c
eh8300sxelf.c
eh8300sxelf_linux.c
-eh8300sxn.c
eh8300sxnelf.c
eh8500.c
eh8500b.c
+++ /dev/null
-# Copyright (C) 2014-2018 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-
-TORS=".tors :
- {
- ___ctors = . ;
- *(.ctors)
- ___ctors_end = . ;
- ___dtors = . ;
- *(.dtors)
- ___dtors_end = . ;
- } > ram"
-
-cat <<EOF
-/* Copyright (C) 2014-2018 Free Software Foundation, Inc.
-
- Copying and distribution of this script, with or without modification,
- are permitted in any medium without royalty provided the copyright
- notice and this notice are preserved. */
-
-OUTPUT_FORMAT("${OUTPUT_FORMAT}")
-OUTPUT_ARCH(${ARCH})
-${RELOCATING+ENTRY ("_start")}
-
-MEMORY
-{
- /* 0xc4 is a magic entry. We should have the linker just
- skip over it one day... */
- vectors : o = 0x0000, l = 0xc4
- magicvectors : o = 0xc4, l = 0x3c
- ram : o = 0x0100, l = 0xfdfc
- /* The stack starts at the top of main ram. */
- topram : o = 0xfefc, l = 0x4
- /* At the very top of the address space is the 8-bit area. */
- eight : o = 0xff00, l = 0x100
-}
-
-SECTIONS
-{
-.vectors :
- {
- /* Use something like this to place a specific
- function's address into the vector table.
-
- SHORT (ABSOLUTE (_foobar)). */
-
- *(.vectors)
- } ${RELOCATING+ > vectors}
-
-.init :
- {
- *(.init)
- } ${RELOCATING+ > ram}
-
-.text :
- {
- *(.rodata)
- *(.text)
- *(.text.*)
- *(.strings)
- ${RELOCATING+ _etext = . ; }
- } ${RELOCATING+ > ram}
-
-${CONSTRUCTING+${TORS}}
-
-.data :
- {
- *(.data)
- *(.data.*)
- *(.tiny)
- ${RELOCATING+ _edata = . ; }
- } ${RELOCATING+ > ram}
-
-.bss :
- {
- ${RELOCATING+ _bss_start = . ;}
- *(.bss)
- *(COMMON)
- ${RELOCATING+ _end = . ; }
- } ${RELOCATING+ >ram}
-
-.stack :
- {
- ${RELOCATING+ _stack = . ; }
- *(.stack)
- } ${RELOCATING+ > topram}
-
-.eight :
- {
- *(.eight)
- } ${RELOCATING+ > eight}
-
-.stab 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stab ]
- }
-
-.stabstr 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stabstr ]
- }
-}
-EOF
+++ /dev/null
-# Copyright (C) 2014-2018 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-
-TORS=".tors :
- {
- ___ctors = . ;
- *(.ctors)
- ___ctors_end = . ;
- ___dtors = . ;
- *(.dtors)
- ___dtors_end = . ;
- } > ram"
-
-cat <<EOF
-/* Copyright (C) 2014-2018 Free Software Foundation, Inc.
-
- Copying and distribution of this script, with or without modification,
- are permitted in any medium without royalty provided the copyright
- notice and this notice are preserved. */
-
-OUTPUT_FORMAT("${OUTPUT_FORMAT}")
-OUTPUT_ARCH(h8300h)
-${RELOCATING+ENTRY ("_start")}
-
-/* The memory size is 256KB to coincide with the simulator.
- Don't change either without considering the other. */
-
-MEMORY
-{
- /* 0xc4 is a magic entry. We should have the linker just
- skip over it one day... */
- vectors : o = 0x0000, l = 0xc4
- magicvectors : o = 0xc4, l = 0x3c
- /* We still only use 256k as the main ram size. */
- ram : o = 0x0100, l = 0x3fefc
- /* The stack starts at the top of main ram. */
- topram : o = 0x3fffc, l = 0x4
- /* This holds variables in the "tiny" sections. */
- tiny : o = 0xff8000, l = 0x7f00
- /* At the very top of the address space is the 8-bit area. */
- eight : o = 0xffff00, l = 0x100
-}
-
-SECTIONS
-{
-.vectors :
- {
- /* Use something like this to place a specific
- function's address into the vector table.
-
- LONG (ABSOLUTE (_foobar)). */
-
- *(.vectors)
- } ${RELOCATING+ > vectors}
-
-.text :
- {
- *(.rodata)
- *(.text)
- *(.strings)
- ${RELOCATING+ _etext = . ; }
- } ${RELOCATING+ > ram}
-
-${CONSTRUCTING+${TORS}}
-
-.data :
- {
- *(.data)
- ${RELOCATING+ _edata = . ; }
- } ${RELOCATING+ > ram}
-
-.bss :
- {
- ${RELOCATING+ _bss_start = . ;}
- *(.bss)
- *(COMMON)
- ${RELOCATING+ _end = . ; }
- } ${RELOCATING+ >ram}
-
-.stack :
- {
- ${RELOCATING+ _stack = . ; }
- *(.stack)
- } ${RELOCATING+ > topram}
-
-.tiny :
- {
- *(.tiny)
- } ${RELOCATING+ > tiny}
-
-.eight :
- {
- *(.eight)
- } ${RELOCATING+ > eight}
-
-.stab 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stab ]
- }
-
-.stabstr 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stabstr ]
- }
-}
-EOF
+++ /dev/null
-# Copyright (C) 2014-2018 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-
-TORS=".tors :
- {
- ___ctors = . ;
- *(.ctors)
- ___ctors_end = . ;
- ___dtors = . ;
- *(.dtors)
- ___dtors_end = . ;
- } > ram"
-
-cat <<EOF
-/* Copyright (C) 2014-2018 Free Software Foundation, Inc.
-
- Copying and distribution of this script, with or without modification,
- are permitted in any medium without royalty provided the copyright
- notice and this notice are preserved. */
-
-OUTPUT_FORMAT("${OUTPUT_FORMAT}")
-OUTPUT_ARCH(h8300hn)
-${RELOCATING+ENTRY ("_start")}
-
-MEMORY
-{
- /* 0xc4 is a magic entry. We should have the linker just
- skip over it one day... */
- vectors : o = 0x0000, l = 0xc4
- magicvectors : o = 0xc4, l = 0x3c
- ram : o = 0x0100, l = 0xfdfc
- /* The stack starts at the top of main ram. */
- topram : o = 0xfefc, l = 0x4
- /* At the very top of the address space is the 8-bit area. */
- eight : o = 0xff00, l = 0x100
-}
-
-SECTIONS
-{
-.vectors :
- {
- /* Use something like this to place a specific
- function's address into the vector table.
-
- SHORT (ABSOLUTE (_foobar)). */
-
- *(.vectors)
- } ${RELOCATING+ > vectors}
-
-.text :
- {
- *(.rodata)
- *(.text)
- *(.strings)
- ${RELOCATING+ _etext = . ; }
- } ${RELOCATING+ > ram}
-
-${CONSTRUCTING+${TORS}}
-
-.data :
- {
- *(.data)
- *(.tiny)
- ${RELOCATING+ _edata = . ; }
- } ${RELOCATING+ > ram}
-
-.bss :
- {
- ${RELOCATING+ _bss_start = . ;}
- *(.bss)
- *(COMMON)
- ${RELOCATING+ _end = . ; }
- } ${RELOCATING+ >ram}
-
-.stack :
- {
- ${RELOCATING+ _stack = . ; }
- *(.stack)
- } ${RELOCATING+ > topram}
-
-.eight :
- {
- *(.eight)
- } ${RELOCATING+ > eight}
-
-.stab 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stab ]
- }
-
-.stabstr 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stabstr ]
- }
-}
-EOF
+++ /dev/null
-# Copyright (C) 2014-2018 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-
-TORS=".tors :
- {
- ___ctors = . ;
- *(.ctors)
- ___ctors_end = . ;
- ___dtors = . ;
- *(.dtors)
- ___dtors_end = . ;
- } > ram"
-
-cat <<EOF
-/* Copyright (C) 2014-2018 Free Software Foundation, Inc.
-
- Copying and distribution of this script, with or without modification,
- are permitted in any medium without royalty provided the copyright
- notice and this notice are preserved. */
-
-OUTPUT_FORMAT("${OUTPUT_FORMAT}")
-OUTPUT_ARCH(h8300s)
-${RELOCATING+ENTRY ("_start")}
-
-/* The memory size is 256KB to coincide with the simulator.
- Don't change either without considering the other. */
-
-MEMORY
-{
- /* 0xc4 is a magic entry. We should have the linker just
- skip over it one day... */
- vectors : o = 0x0000, l = 0xc4
- magicvectors : o = 0xc4, l = 0x3c
- /* We still only use 256k as the main ram size. */
- ram : o = 0x0100, l = 0x3fefc
- /* The stack starts at the top of main ram. */
- topram : o = 0x3fffc, l = 0x4
- /* This holds variables in the "tiny" sections. */
- tiny : o = 0xff8000, l = 0x7f00
- /* At the very top of the address space is the 8-bit area. */
- eight : o = 0xffff00, l = 0x100
-}
-
-SECTIONS
-{
-.vectors :
- {
- /* Use something like this to place a specific
- function's address into the vector table.
-
- LONG (ABSOLUTE (_foobar)). */
-
- *(.vectors)
- } ${RELOCATING+ > vectors}
-
-.text :
- {
- *(.rodata)
- *(.text)
- *(.strings)
- ${RELOCATING+ _etext = . ; }
- } ${RELOCATING+ > ram}
-
-${CONSTRUCTING+${TORS}}
-
-.data :
- {
- *(.data)
- ${RELOCATING+ _edata = . ; }
- } ${RELOCATING+ > ram}
-
-.bss :
- {
- ${RELOCATING+ _bss_start = . ;}
- *(.bss)
- *(COMMON)
- ${RELOCATING+ _end = . ; }
- } ${RELOCATING+ >ram}
-
-.stack :
- {
- ${RELOCATING+ _stack = . ; }
- *(.stack)
- } ${RELOCATING+ > topram}
-
-.tiny :
- {
- *(.tiny)
- } ${RELOCATING+ > tiny}
-
-.eight :
- {
- *(.eight)
- } ${RELOCATING+ > eight}
-
-.stab 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stab ]
- }
-
-.stabstr 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stabstr ]
- }
-}
-EOF
+++ /dev/null
-# Copyright (C) 2014-2018 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-
-TORS=".tors :
- {
- ___ctors = . ;
- *(.ctors)
- ___ctors_end = . ;
- ___dtors = . ;
- *(.dtors)
- ___dtors_end = . ;
- } > ram"
-
-cat <<EOF
-/* Copyright (C) 2014-2018 Free Software Foundation, Inc.
-
- Copying and distribution of this script, with or without modification,
- are permitted in any medium without royalty provided the copyright
- notice and this notice are preserved. */
-
-OUTPUT_FORMAT("${OUTPUT_FORMAT}")
-OUTPUT_ARCH(h8300sn)
-${RELOCATING+ENTRY ("_start")}
-
-MEMORY
-{
- /* 0xc4 is a magic entry. We should have the linker just
- skip over it one day... */
- vectors : o = 0x0000, l = 0xc4
- magicvectors : o = 0xc4, l = 0x3c
- ram : o = 0x0100, l = 0xfdfc
- /* The stack starts at the top of main ram. */
- topram : o = 0xfefc, l = 0x4
- /* At the very top of the address space is the 8-bit area. */
- eight : o = 0xff00, l = 0x100
-}
-
-SECTIONS
-{
-.vectors :
- {
- /* Use something like this to place a specific
- function's address into the vector table.
-
- SHORT (ABSOLUTE (_foobar)). */
-
- *(.vectors)
- } ${RELOCATING+ > vectors}
-
-.text :
- {
- *(.rodata)
- *(.text)
- *(.strings)
- ${RELOCATING+ _etext = . ; }
- } ${RELOCATING+ > ram}
-
-${CONSTRUCTING+${TORS}}
-
-.data :
- {
- *(.data)
- *(.tiny)
- ${RELOCATING+ _edata = . ; }
- } ${RELOCATING+ > ram}
-
-.bss :
- {
- ${RELOCATING+ _bss_start = . ;}
- *(.bss)
- *(COMMON)
- ${RELOCATING+ _end = . ; }
- } ${RELOCATING+ >ram}
-
-.stack :
- {
- ${RELOCATING+ _stack = . ; }
- *(.stack)
- } ${RELOCATING+ > topram}
-
-.eight :
- {
- *(.eight)
- } ${RELOCATING+ > eight}
-
-.stab 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stab ]
- }
-
-.stabstr 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stabstr ]
- }
-}
-EOF
+++ /dev/null
-# Copyright (C) 2014-2018 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-
-TORS=".tors :
- {
- ___ctors = . ;
- *(.ctors)
- ___ctors_end = . ;
- ___dtors = . ;
- *(.dtors)
- ___dtors_end = . ;
- } > ram"
-
-cat <<EOF
-/* Copyright (C) 2014-2018 Free Software Foundation, Inc.
-
- Copying and distribution of this script, with or without modification,
- are permitted in any medium without royalty provided the copyright
- notice and this notice are preserved. */
-
-OUTPUT_FORMAT("${OUTPUT_FORMAT}")
-OUTPUT_ARCH(h8300sx)
-${RELOCATING+ENTRY ("_start")}
-
-/* The memory size is 256KB to coincide with the simulator.
- Don't change either without considering the other. */
-
-MEMORY
-{
- /* 0xc4 is a magic entry. We should have the linker just
- skip over it one day... */
- vectors : o = 0x0000, l = 0xc4
- magicvectors : o = 0xc4, l = 0x3c
- /* We still only use 256k as the main ram size. */
- ram : o = 0x0100, l = 0x3fefc
- /* The stack starts at the top of main ram. */
- topram : o = 0x3fffc, l = 0x4
- /* This holds variables in the "tiny" sections. */
- tiny : o = 0xff8000, l = 0x7f00
- /* At the very top of the address space is the 8-bit area. */
- eight : o = 0xffff00, l = 0x100
-}
-
-SECTIONS
-{
-.vectors :
- {
- /* Use something like this to place a specific
- function's address into the vector table.
-
- LONG (ABSOLUTE (_foobar)). */
-
- *(.vectors)
- } ${RELOCATING+ > vectors}
-
-.text :
- {
- *(.rodata)
- *(.text)
- *(.strings)
- ${RELOCATING+ _etext = . ; }
- } ${RELOCATING+ > ram}
-
-${CONSTRUCTING+${TORS}}
-
-.data :
- {
- *(.data)
- ${RELOCATING+ _edata = . ; }
- } ${RELOCATING+ > ram}
-
-.bss :
- {
- ${RELOCATING+ _bss_start = . ;}
- *(.bss)
- *(COMMON)
- ${RELOCATING+ _end = . ; }
- } ${RELOCATING+ >ram}
-
-.stack :
- {
- ${RELOCATING+ _stack = . ; }
- *(.stack)
- } ${RELOCATING+ > topram}
-
-.tiny :
- {
- *(.tiny)
- } ${RELOCATING+ > tiny}
-
-.eight :
- {
- *(.eight)
- } ${RELOCATING+ > eight}
-
-.stab 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stab ]
- }
-
-.stabstr 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stabstr ]
- }
-}
-EOF
+++ /dev/null
-# Copyright (C) 2014-2018 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-
-TORS=".tors :
- {
- ___ctors = . ;
- *(.ctors)
- ___ctors_end = . ;
- ___dtors = . ;
- *(.dtors)
- ___dtors_end = . ;
- } > ram"
-
-cat <<EOF
-/* Copyright (C) 2014-2018 Free Software Foundation, Inc.
-
- Copying and distribution of this script, with or without modification,
- are permitted in any medium without royalty provided the copyright
- notice and this notice are preserved. */
-
-OUTPUT_FORMAT("${OUTPUT_FORMAT}")
-OUTPUT_ARCH(h8300sxn)
-${RELOCATING+ENTRY ("_start")}
-
-MEMORY
-{
- /* 0xc4 is a magic entry. We should have the linker just
- skip over it one day... */
- vectors : o = 0x0000, l = 0xc4
- magicvectors : o = 0xc4, l = 0x3c
- ram : o = 0x0100, l = 0xfdfc
- /* The stack starts at the top of main ram. */
- topram : o = 0xfefc, l = 0x4
- /* At the very top of the address space is the 8-bit area. */
- eight : o = 0xff00, l = 0x100
-}
-
-SECTIONS
-{
-.vectors :
- {
- /* Use something like this to place a specific
- function's address into the vector table.
-
- SHORT (ABSOLUTE (_foobar)). */
-
- *(.vectors)
- } ${RELOCATING+ > vectors}
-
-.text :
- {
- *(.rodata)
- *(.text)
- *(.strings)
- ${RELOCATING+ _etext = . ; }
- } ${RELOCATING+ > ram}
-
-${CONSTRUCTING+${TORS}}
-
-.data :
- {
- *(.data)
- *(.tiny)
- ${RELOCATING+ _edata = . ; }
- } ${RELOCATING+ > ram}
-
-.bss :
- {
- ${RELOCATING+ _bss_start = . ;}
- *(.bss)
- *(COMMON)
- ${RELOCATING+ _end = . ; }
- } ${RELOCATING+ >ram}
-
-.stack :
- {
- ${RELOCATING+ _stack = . ; }
- *(.stack)
- } ${RELOCATING+ > topram}
-
-.eight :
- {
- *(.eight)
- } ${RELOCATING+ > eight}
-
-.stab 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stab ]
- }
-
-.stabstr 0 ${RELOCATING+(NOLOAD)} :
- {
- [ .stabstr ]
- }
-}
-EOF
}
run_dump_test relax
-
-if [is_elf_format] {
- run_dump_test relax-2
- run_dump_test relax-3
- run_dump_test relax-4
- run_dump_test relax-5
- run_dump_test relax-6
- run_dump_test relax-7
- run_dump_test gcsection
-} else {
- run_dump_test relax-3-coff
- run_dump_test relax-4-coff
- run_dump_test relax-5-coff
- run_dump_test relax-6-coff
-}
+run_dump_test relax-2
+run_dump_test relax-3
+run_dump_test relax-4
+run_dump_test relax-5
+run_dump_test relax-6
+run_dump_test relax-7
+run_dump_test gcsection
+++ /dev/null
-# name: H8300 Relaxation Test 3 (for COFF)
-# source: relax-3.s
-# ld: --relax -m h8300s
-# objdump: -d
-
-.*: file format .*-h8300
-
-Disassembly of section .text:
-
-00000100 <_start>:
-#
-# Relaxation of aa:16
-#
-.*: 6a 08 00 00.*mov.b @0x0:16,r0l
-.*: 6a 08 7f ff.*mov.b @0x7fff:16,r0l
-.*: 6a 08 80 00.*mov.b @0x8000:16,r0l
-.*: 6a 08 fe ff.*mov.b @0xfeff:16,r0l
-.*: 28 00 .*mov.b @0x0:8,r0l
-.*: 28 ff .*mov.b @0xff:8,r0l
-#
-# Relaxation of aa:32
-#
-.*: 6a 08 00 00.*mov.b @0x0:16,r0l
-.*: 6a 08 7f ff.*mov.b @0x7fff:16,r0l
-.*: 6a 28 00 00.*mov.b @0x8000:32,r0l
-.*: 80 00
-.*: 6a 28 00 00.*mov.b @0xff00:32,r0l
-.*: ff 00
-.*: 6a 28 00 ff.*mov.b @0xffff00:32,r0l
-.*: ff 00
-.*: 6a 28 ff ff.*mov.b @0xffff7fff:32,r0l
-.*: 7f ff
-.*: 6a 08 80 00.*mov.b @0x8000:16,r0l
-.*: 6a 08 fe ff.*mov.b @0xfeff:16,r0l
-.*: 28 00 .*mov.b @0x0:8,r0l
-.*: 28 ff .*mov.b @0xff:8,r0l
+++ /dev/null
-# name: H8300 Relaxation Test 4 (for COFF)
-# source: relax-4.s
-# ld: --relax -m h8300s
-# objdump: -d
-
-.*: file format .*-h8300
-
-Disassembly of section .text:
-
-00000100 <_start>:
- 100: f8 03.*mov.b #0x3,r0l
- 102: fa 05.*mov.b #0x5,r2l
- 104: 7f ff 60 80.*bset r0l,@0xff:8
- 108: 7f 00 60 a0.*bset r2l,@0x0:8
- 10c: 7e ff 63 a0.*btst r2l,@0xff:8
- 110: 7e 00 63 80.*btst r0l,@0x0:8
- 114: 6a 18 00 00.*bset #0x5,@0x0:16
- 118: 70 50
- 11a: 6a 18 7f ff.*bset #0x5,@0x7fff:16
- 11e: 70 50
- 120: 6a 18 80 00.*bset #0x5,@0x8000:16
- 124: 70 50
- 126: 6a 18 fe ff.*bset #0x5,@0xfeff:16
- 12a: 70 50
- 12c: 7f 00 70 50.*bset #0x5,@0x0:8
- 130: 7f ff 70 50.*bset #0x5,@0xff:8
- 134: 6a 10 00 00.*band #0x5,@0x0:16
- 138: 76 50
- 13a: 6a 10 7f ff.*band #0x5,@0x7fff:16
- 13e: 76 50
- 140: 6a 10 80 00.*band #0x5,@0x8000:16
- 144: 76 50
- 146: 6a 10 fe ff.*band #0x5,@0xfeff:16
- 14a: 76 50
- 14c: 7e 00 76 50.*band #0x5,@0x0:8
- 150: 7e ff 76 50.*band #0x5,@0xff:8
- 154: 7f ff 60 a0.*bset r2l,@0xff:8
- 158: 7f 00 60 80.*bset r0l,@0x0:8
- 15c: 7e ff 63 80.*btst r0l,@0xff:8
- 160: 7e 00 63 a0.*btst r2l,@0x0:8
- 164: 6a 18 00 00.*bset #0x6,@0x0:16
- 168: 70 60
- 16a: 6a 18 7f ff.*bset #0x6,@0x7fff:16
- 16e: 70 60
- 170: 6a 38 00 00.*bset #0x6,@0x8000:32
- 174: 80 00 70 60
- 178: 6a 38 00 00.*bset #0x6,@0xff00:32
- 17c: ff 00 70 60
- 180: 6a 38 00 ff.*bset #0x6,@0xffff00:32
- 184: ff 00 70 60
- 188: 6a 38 ff ff.*bset #0x6,@0xffff7fff:32
- 18c: 7f ff 70 60
- 190: 6a 18 80 00.*bset #0x6,@0x8000:16
- 194: 70 60
- 196: 6a 18 fe ff.*bset #0x6,@0xfeff:16
- 19a: 70 60
- 19c: 7f 00 70 60.*bset #0x6,@0x0:8
- 1a0: 7f ff 70 60.*bset #0x6,@0xff:8
- 1a4: 6a 10 00 00.*band #0x6,@0x0:16
- 1a8: 76 60
- 1aa: 6a 10 7f ff.*band #0x6,@0x7fff:16
- 1ae: 76 60
- 1b0: 6a 30 00 00.*band #0x6,@0x8000:32
- 1b4: 80 00 76 60
- 1b8: 6a 30 00 00.*band #0x6,@0xff00:32
- 1bc: ff 00 76 60
- 1c0: 6a 30 00 ff.*band #0x6,@0xffff00:32
- 1c4: ff 00 76 60
- 1c8: 6a 30 ff ff.*band #0x6,@0xffff7fff:32
- 1cc: 7f ff 76 60
- 1d0: 6a 10 80 00.*band #0x6,@0x8000:16
- 1d4: 76 60
- 1d6: 6a 10 fe ff.*band #0x6,@0xfeff:16
- 1da: 76 60
- 1dc: 7e 00 76 60.*band #0x6,@0x0:8
- 1e0: 7e ff 76 60.*band #0x6,@0xff:8
+++ /dev/null
-# name: H8300 Relaxation Test 5 (for COFF)
-# source: relax-5.s
-# ld: --relax -m h8300s
-# objdump: -d --no-show-raw-insn
-
-.*: file format .*-h8300
-
-Disassembly of section .text:
-
-00000100 <_start>:
- 100:.*ldc @0x0:16,ccr
- 106:.*ldc @0x7fff:16,ccr
- 10c:.*ldc @0x8000:32,ccr
- 114:.*ldc @0xff00:32,ccr
- 11c:.*ldc @0xffff00:32,ccr
- 124:.*ldc @0xffff7fff:32,ccr
- 12c:.*ldc @0x8000:16,ccr
- 132:.*ldc @0xfeff:16,ccr
- 138:.*ldc @0xff00:16,ccr
- 13e:.*ldc @0xffff:16,ccr
- 144:.*stc ccr,@0x0:16
- 14a:.*stc ccr,@0x7fff:16
- 150:.*stc ccr,@0x8000:32
- 158:.*stc ccr,@0xff00:32
- 160:.*stc ccr,@0xffff00:32
- 168:.*stc ccr,@0xffff7fff:32
- 170:.*stc ccr,@0x8000:16
- 176:.*stc ccr,@0xfeff:16
- 17c:.*stc ccr,@0xff00:16
- 182:.*stc ccr,@0xffff:16
- 188:.*ldc @0x0:16,exr
- 18e:.*ldc @0x7fff:16,exr
- 194:.*ldc @0x8000:32,exr
- 19c:.*ldc @0xff00:32,exr
- 1a4:.*ldc @0xffff00:32,exr
- 1ac:.*ldc @0xffff7fff:32,exr
- 1b4:.*ldc @0x8000:16,exr
- 1ba:.*ldc @0xfeff:16,exr
- 1c0:.*ldc @0xff00:16,exr
- 1c6:.*ldc @0xffff:16,exr
- 1cc:.*stc exr,@0x0:16
- 1d2:.*stc exr,@0x7fff:16
- 1d8:.*stc exr,@0x8000:32
- 1e0:.*stc exr,@0xff00:32
- 1e8:.*stc exr,@0xffff00:32
- 1f0:.*stc exr,@0xffff7fff:32
- 1f8:.*stc exr,@0x8000:16
- 1fe:.*stc exr,@0xfeff:16
- 204:.*stc exr,@0xff00:16
- 20a:.*stc exr,@0xffff:16
+++ /dev/null
-# name: H8300 Relaxation Test 6
-# source: relax-6.s
-# ld: --relax -m h8300s
-# objdump: -d --no-show-raw-insn
-
-.*: file format .*-h8300
-Disassembly of section .text:
-
-00000100 <_start>:
- 100: mov.b r2l,@0xbd:8
- 102: rts
projects / external / binutils.git / commitdiff