sky_files="$sky_files sky-engine.c sky-gpuif.c sky-gpuif.h"
sky_files="$sky_files sky-gs.c sky-gs.h"
sky_files="$sky_files sky-hardware.c sky-hardware.h sky-gdb.c sky-gdb.h"
-sky_files="$sky_files sky-libvpe.c sky-libvpe.h sky-pke.c sky-pke.h"
+sky_files="$sky_files sky-libvpe.c sky-libvpe.h sky-vif.c sky-vif.h"
sky_files="$sky_files sky-vpe.h sky-vu.h sky-vu.c sky-vudis.h sky-vudis.c"
-sky_files="$sky_files sky-console.h sky-console.c"
+sky_files="$sky_files sky-console.h sky-console.c sky-psio.h sky-psio.c"
sky_files="$sky_files sky-interact.h sky-interact.c"
sky_files="$sky_files sky-indebug.h sky-indebug.c"
if ( echo $* | grep keep\-sky > /dev/null ) ; then
* interp.c: #include "itable.h" if WITH_IGEN.
(get_insn_name): New function.
(sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS.
+ * sim-main.h (MAX_INSNS,INSN_NAME): Delete.
+start-sanitize-sky
+Tue Sep 22 10:35:37 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * sim-main.c (tlb_try_match): Specially match virtual
+ pages mapped to scratchpad RAM, an unimplemented feature.
+
+end-sanitize-sky
+start-sanitize-r5900
+Fri Sep 18 11:31:16 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * r5900.igen (prot3w): Correct rotation sequence; patch
+ from customer.
+
+end-sanitize-r5900
Mon Sep 14 12:36:44 1998 Frank Ch. Eigler <fche@cygnus.com>
* configure: Rebuilt to inhale new common/aclocal.m4.
* r5900.igen (plzcw): Make `i' signed.
+Wed Sep 9 15:02:10 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * sim-main.h (COP0_COUNT,COP0_COMPARE,status_IM7): New macros.
+ * sky-engine.c (cpu_issue): Increment COP0_COUNT and signal an
+ interrupt if == COP0_COMPARE and interrupt masks/enables allow it.
+ * interp.c (signal_exception, sky version): Handle INT 2.
+
Wed Sep 9 11:28:20 1998 Ron Unrau <runrau@cygnus.com>
* sim-main.h: track COP0 registers
frequent hw-trace messages.
end-sanitize-tx3904
+start-sanitize-sky
+Tue Aug 11 13:52:16 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * interp.c (signal_exception): Set IP3 bit in CAUSE on
+ sky interrupt.
+
+end-sanitize-sky
Fri Jul 31 18:14:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
* vr.igen (MulAcc): Identify as a vr4100 specific function.
start-sanitize-vr4320
* vr4320.igen: Move instructions to vr.igen.
* Makefile.in (IGEN_INCLUDE): Remove vr5320.igen.
+
end-sanitize-vr4320
+start-sanitize-sky
+Fri Jul 24 16:01:03 1998 Ian Carmichael <iancarm@cygnus.com>
+
+ * interp.c (MONITOR_SIZE): Make 1MB monitor for SKY.
+ * mips.igen (BREAK): Fix 0xffff2 monitor call. Slightly less
+ confusing message if not enough --load-next options appear.
+
+ * sky-pke.h (VUx_MEMx_SRCADDR_START): Move to 0x19800000 range.
+ * sim-main.c (GDB_COMM_AREA): Move to 0x19810000.
+ * sky-gdb.c (init_fifo_bp_cache): Use VIO_BASE when reading GDB area.
+ (resume_handler): Same.
+ (suspend_handler): Same.
+
+Wed Jul 22 13:04:13 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * mips.igen (break): Implement LOAD_INSTRUCTION ("break 0xffff1")
+ to trigger multi-phase load.
+
+ * sim-main.c: Include sim-assert.h for ASSERT macro.
+ * sim-main.h (PRINTF_INSTRUCTION): Correct bit pattern for
+ "break 0xffff2".
+
+Tue Jul 21 18:37:36 1998 Ian Carmichael <iancarm@cygnus.com>
+
+ MMU support.
+ * interp.c (sim_open): Initialize TLB.
+ * interp.c (signal_exceptions): New 5900 handling.
+ * r5900.igen (TLBWR, TLBWI, TLBR, TLBP): Make these work.
+ * sim-main.c (tlb_try_match, tlb_lookup): New functions.
+ (address_translation): Use the TLB.
+ * sim-main.h (r4000_tlb_entry_t): New type.
+ (TLB_*): New constants.
+ (COP0_*): New register names.
+
+ Sky character I/O device.
+ * sky-psio.c: New file.
+ * sky-psio.h: New file.
+ * Makefile.in: Add sky-psio.o.
+end-sanitize-sky
start-sanitize-r5900
Tue Jul 14 16:10:45 1998 Andrew Cagney <cagney@b1.cygnus.com>
# start-sanitize-sky
SIM_SKY_OBJS = \
+ sky-console.o \
sky-device.o \
sky-dma.o \
sky-engine.o \
+ sky-interact.o \
sky-gpuif.o \
sky-hardware.o \
+ sky-indebug.o \
sky-libvpe.o \
- sky-pke.o \
+ sky-vif.o \
+ sky-psio.o \
sky-vu.o \
sky-vudis.o \
sky-gs.o \
semantics.o \
idecode.o \
icache.o \
- engine.o \
+ @mips_igen_engine@ \
irun.o \
SIM_M16_OBJ = \
$(start-sanitize-r5900) \
$(srcdir)/r5900.igen \
$(end-sanitize-r5900) \
- $(start-sanitize-vr5400) \
- $(srcdir)/vr5400.igen \
+ $(start-sanitize-cygnus) \
$(srcdir)/mdmx.igen \
- $(end-sanitize-vr5400) \
- $(start-sanitize-vr4320) \
- $(srcdir)/vr4320.igen \
- $(end-sanitize-vr4320) \
+ $(end-sanitize-cygnus) \
$(srcdir)/m16.igen \
- $(srcdir)/tx.igen
+ $(srcdir)/tx.igen \
+ $(srcdir)/vr.igen \
SIM_IGEN_ALL = tmp-igen
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12.1
+# Generated automatically using autoconf version 2.12.2
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
ac_help="$ac_help
--with-sim-gpu2=path Use GPU2 library under given directory"
ac_help="$ac_help
+ --with-x use the X Window System"
+ac_help="$ac_help
--with-sim-funit=path Use target FP library under given directory"
# Initialize some variables set by options.
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12.1"
+ echo "configure generated by autoconf version 2.12.2"
exit 0 ;;
-with-* | --with-*)
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
+ac_exeext=
+ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:701: checking how to run the C preprocessor" >&5
+echo "configure:705: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 716 "configure"
+#line 720 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:722: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:726: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 733 "configure"
+#line 737 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:743: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 754 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:760: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
rm -f conftest*
fi
rm -f conftest*
+fi
+rm -f conftest*
ac_cv_prog_CPP="$CPP"
fi
CPP="$ac_cv_prog_CPP"
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:762: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:785: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:789: checking for POSIXized ISC" >&5
+echo "configure:812: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:810: checking for ANSI C header files" >&5
+echo "configure:833: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 815 "configure"
+#line 838 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:823: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:846: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_cv_header_stdc=yes
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 840 "configure"
+#line 863 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 858 "configure"
+#line 881 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 879 "configure"
+#line 902 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:913: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:914: checking for working const" >&5
+echo "configure:937: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 919 "configure"
+#line 942 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:968: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:991: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:989: checking for inline" >&5
+echo "configure:1012: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 996 "configure"
+#line 1019 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:1003: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1026: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:1029: checking for off_t" >&5
+echo "configure:1052: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1034 "configure"
+#line 1057 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:1062: checking for size_t" >&5
+echo "configure:1085: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1067 "configure"
+#line 1090 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:1097: checking for working alloca.h" >&5
+echo "configure:1120: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1102 "configure"
+#line 1125 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:1109: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:1130: checking for alloca" >&5
+echo "configure:1153: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1135 "configure"
+#line 1158 "configure"
#include "confdefs.h"
#ifdef __GNUC__
# define alloca __builtin_alloca
#else
-# if HAVE_ALLOCA_H
-# include <alloca.h>
+# ifdef _MSC_VER
+# include <malloc.h>
+# define alloca _alloca
# else
-# ifdef _AIX
- #pragma alloca
+# if HAVE_ALLOCA_H
+# include <alloca.h>
# else
-# ifndef alloca /* predefined by HP cc +Olibcalls */
+# ifdef _AIX
+ #pragma alloca
+# else
+# ifndef alloca /* predefined by HP cc +Olibcalls */
char *alloca ();
+# endif
# endif
# endif
# endif
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:1158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
# that cause trouble. Some versions do not even contain alloca or
# contain a buggy version. If you still want to use their alloca,
# use ar to extract alloca.o from them instead of compiling alloca.c.
- ALLOCA=alloca.o
+ ALLOCA=alloca.${ac_objext}
cat >> confdefs.h <<\EOF
#define C_ALLOCA 1
EOF
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:1190: checking whether alloca needs Cray hooks" >&5
+echo "configure:1218: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1195 "configure"
+#line 1223 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1220: checking for $ac_func" >&5
+echo "configure:1248: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1225 "configure"
+#line 1253 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1276: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:1275: checking stack direction for C alloca" >&5
+echo "configure:1303: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 1283 "configure"
+#line 1311 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:1302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1327: checking for $ac_hdr" >&5
+echo "configure:1355: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1332 "configure"
+#line 1360 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:1365: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1366: checking for $ac_func" >&5
+echo "configure:1394: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1371 "configure"
+#line 1399 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:1419: checking for working mmap" >&5
+echo "configure:1447: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 1427 "configure"
+#line 1455 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:1567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1595: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1640: checking host system type" >&5
+echo "configure:1668: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1661: checking target system type" >&5
+echo "configure:1689: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1679: checking build system type" >&5
+echo "configure:1707: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1723: checking for $ac_word" >&5
+echo "configure:1751: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1752: checking for $ac_word" >&5
+echo "configure:1780: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
echo "$ac_t""no" 1>&6
fi
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1830: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1800: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1861: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 1810 "configure"
+#line 1871 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1814: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1875: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1834: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1895: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1839: checking whether we are using GNU C" >&5
+echo "configure:1900: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1848: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1909: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1863: checking whether ${CC-cc} accepts -g" >&5
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1928: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
- CFLAGS="-O2"
+ CFLAGS="-g"
fi
else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-g"
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
fi
# Find a good install program. We prefer a C program (faster),
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1902: checking for a BSD compatible install" >&5
+echo "configure:1971: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1968: checking for $ac_word" >&5
+echo "configure:2037: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2002: checking for $ac_hdr" >&5
+echo "configure:2071: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2007 "configure"
+#line 2076 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2012: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2081: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2042: checking for $ac_func" >&5
+echo "configure:2111: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2047 "configure"
+#line 2116 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2070: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2099: checking for $ac_func" >&5
+echo "configure:2168: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2104 "configure"
+#line 2173 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:2161: checking for LC_MESSAGES" >&5
+echo "configure:2230: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2166 "configure"
+#line 2235 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:2173: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2242: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:2194: checking whether NLS is requested" >&5
+echo "configure:2263: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:2214: checking whether included gettext is requested" >&5
+echo "configure:2283: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:2233: checking for libintl.h" >&5
+echo "configure:2302: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2238 "configure"
+#line 2307 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2243: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2312: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:2260: checking for gettext in libc" >&5
+echo "configure:2329: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2265 "configure"
+#line 2334 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:2272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2341: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:2288: checking for bindtextdomain in -lintl" >&5
+echo "configure:2357: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2296 "configure"
+#line 2365 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:2307: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:2323: checking for gettext in libintl" >&5
+echo "configure:2392: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2328 "configure"
+#line 2397 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:2335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2363: checking for $ac_word" >&5
+echo "configure:2432: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2397: checking for $ac_func" >&5
+echo "configure:2466: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2402 "configure"
+#line 2471 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2494: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2452: checking for $ac_word" >&5
+echo "configure:2521: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2487: checking for $ac_word" >&5
+echo "configure:2556: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 2519 "configure"
+#line 2588 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:2527: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2559: checking for $ac_word" >&5
+echo "configure:2628: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2593: checking for $ac_word" >&5
+echo "configure:2662: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2628: checking for $ac_word" >&5
+echo "configure:2697: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:2718: checking for catalogs to be installed" >&5
+echo "configure:2787: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:2746: checking for linux/version.h" >&5
+echo "configure:2815: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2751 "configure"
+#line 2820 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2756: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2825: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2825: checking for $ac_hdr" >&5
+echo "configure:2894: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2830 "configure"
+#line 2899 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2835: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2904: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2865: checking for $ac_hdr" >&5
+echo "configure:2934: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2870 "configure"
+#line 2939 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2875: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2944: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2905: checking for $ac_hdr" >&5
+echo "configure:2974: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2910 "configure"
+#line 2979 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2915: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2984: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
for ac_func in getrusage time sigaction __setfpucw
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2944: checking for $ac_func" >&5
+echo "configure:3013: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2949 "configure"
+#line 3018 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3041: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
+# Check for socket libraries
+echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6
+echo "configure:3068: checking for bind in -lsocket" >&5
+ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lsocket $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3076 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char bind();
+
+int main() {
+bind()
+; return 0; }
+EOF
+if { (eval echo configure:3087: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+ LIBS="-lsocket $LIBS"
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
+echo "configure:3115: checking for gethostbyname in -lnsl" >&5
+ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lnsl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3123 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname();
+
+int main() {
+gethostbyname()
+; return 0; }
+EOF
+if { (eval echo configure:3134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+ LIBS="-lnsl $LIBS"
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
. ${srcdir}/../../bfd/configure.host
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:3145: checking return type of signal handlers" >&5
+echo "configure:3310: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3150 "configure"
+#line 3315 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:3167: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3332: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:3187: checking for executable suffix" >&5
+echo "configure:3352: checking for executable suffix" >&5
if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$cross_compiling" = "xno"; then
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:3340: checking whether byte ordering is bigendian" >&5
+echo "configure:3505: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 3347 "configure"
+#line 3512 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:3358: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3523: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 3362 "configure"
+#line 3527 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:3373: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3538: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 3393 "configure"
+#line 3558 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:3406: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
# start-sanitize-r5900
mips64r59*-*-*) mips_endian=LITTLE_ENDIAN ;;
# end-sanitize-r5900
+ mips64el*-*-*) mips_endian=LITTLE_ENDIAN ;;
mips64*-*-*) default_endian=BIG_ENDIAN ;;
mips16*-*-*) default_endian=BIG_ENDIAN ;;
mips*-*-*) default_endian=BIG_ENDIAN ;;
# start-sanitize-r5900
mips64r59*-*-*) mips_bitsize=64 ; mips_msb=63 ; mips_addr_bitsize=32;;
# end-sanitize-r5900
+# start-sanitize-sky
+ mips64*-sky*-*) mips_bitsize=64 ; mips_msb=63 ; mips_addr_bitsize=32;;
+# end-sanitize-sky
mips64*-*-*) mips_bitsize=64 ; mips_msb=63 ;;
mips16*-*-*) mips_bitsize=64 ; mips_msb=63 ;;
mips*-*-*) mips_bitsize=32 ; mips_msb=31 ;;
# start-sanitize-r5900
mips64r59*-*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;
# end-sanitize-r5900
+# start-sanitize-sky
+ mips64*-sky*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;
+# end-sanitize-sky
mips64*-*-*) mips_fpu=HARD_FLOATING_POINT ;;
mips16*-*-*) mips_fpu=HARD_FLOATING_POINT ;;
- mips*-*-*) mips_fpu=HARD_FLOATING_POINT ;;
+ mips*-*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;
*) mips_fpu=HARD_FLOATING_POINT ;;
esac
sim_igen_machine="-M mipsIV,vr4320 -G gen-multi-sim=mipsIV"
# end-sanitize-vr4320
;;
-# start-sanitize-vr5400
+# start-sanitize-cygnus
mips64vr54*-*-*) sim_default_gen=IGEN
sim_use_gen=IGEN
sim_igen_machine="-M vr5000,vr5400 -G gen-multi-sim=vr5400"
;;
-# end-sanitize-vr5400
+# end-sanitize-cygnus
mips64vr5*-*-*) sim_default_gen=IGEN
sim_use_gen=IGEN
sim_igen_machine="-M vr5000"
-# start-sanitize-vr5400
+# start-sanitize-cygnus
sim_igen_machine="-M vr5000,vr5400 -G gen-multi-sim=vr5000"
-# end-sanitize-vr5400
+# end-sanitize-cygnus
;;
mips64vr4100-*-*) echo "NOTE: mips64vr4100 still uses gencode"
sim_default_gen=M16
-case "${target}" in
-# start-sanitize-sky
- mips64r59*-sky-*) mips_extra_objs='$(SIM_SKY_OBJS)' ;
- SIM_SUBTARGET="-DTARGET_SKY -DWITH_DEVICES=1 -DDEVICE_INIT=1";;
-
-# end-sanitize-sky
- *) mips_extra_objs="" ;;
-esac
-
-
-
-
-# start-sanitize-tx3904
#
# Add simulated hardware devices
#
hw_enabled=no
case "${target}" in
- mips*tx39*) hw_enabled=yes ; hw_extra_devices="tx3904cpu tx3904irc tx3904tmr" ;;
- *) ;;
+# start-sanitize-tx3904
+ mips*tx39*)
+ hw_enabled=yes
+ hw_extra_devices="tx3904cpu tx3904irc tx3904tmr tx3904sio"
+ mips_extra_objs="dv-sockser.o"
+ SIM_SUBTARGET="$SIM_SUBTARGET -DTARGET_TX3904=1"
+ ;;
+# end-sanitize-tx3904
+# start-sanitize-sky
+ mips64r59*-sky-*)
+ mips_extra_objs='$(SIM_SKY_OBJS)'
+ SIM_SUBTARGET="-DTARGET_SKY -DWITH_DEVICES=1 -DDEVICE_INIT=1"
+ ;;
+ mips64*-skyb-*)
+ mips_extra_objs='$(SIM_SKY_OBJS)'
+ SIM_SUBTARGET="-DTARGET_SKY -DTARGET_SKY_B -DWITH_DEVICES=1 -DDEVICE_INIT=1"
+ ;;
+# end-sanitize-sky
+ *)
+ mips_extra_objs=""
+ ;;
esac
if test x"$hw_enabled" = x"yes"; then
fi
fi
-# end-sanitize-tx3904
+
+
+
+# Choose simulator engine
+case "${target}" in
+# start-sanitize-sky
+ mips64r59*-sky-*)
+ mips_igen_engine=""
+ ;;
+ mips64*-skyb-*)
+ mips_igen_engine=""
+ ;;
+# end-sanitize-sky
+ *) mips_igen_engine="engine.o"
+ ;;
+esac
+
# If we find X, set shell vars x_includes and x_libraries to the
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:3912: checking for X" >&5
+echo "configure:4106: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 3974 "configure"
+#line 4168 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3979: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:4173: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# We can compile using X headers with no special include directory.
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4048 "configure"
+#line 4242 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:4055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
if test -d "${withval}"
then
SIM_SUBTARGET="${SIM_SUBTARGET} -DSKY_GPU2 -I${withval}/include"
- mips_extra_libs="-L${withval}/lib -lgpu2 -L${x_libraries} -lX11"
-else
- { echo "configure: error: "Directory ${withval} does not exist."" 1>&2; exit 1; };
+ mips_extra_libs="-L${withval}/lib -lgpu2 -L${x_libraries} -lX11 -lXext"
+ WITH_GPU2="yes" ; export WITH_GPU2
+
+ # complex X/etc. detection; stolen shamelessly from tcl/tk/gdb configury. --angela
+
+ #--------------------------------------------------------------------
+ # Locate the X11 header files and the X11 library archive. Try
+ # the ac_path_x macro first, but if it doesn't find the X stuff
+ # (e.g. because there's no xmkmf program) then check through
+ # a list of possible directories. Under some conditions the
+ # autoconf macro will return an include directory that contains
+ # no include files, so double-check its result just to be safe.
+ #--------------------------------------------------------------------
+
+ # If we find X, set shell vars x_includes and x_libraries to the
+# paths, otherwise set no_x=yes.
+# Uses ac_ vars as temps to allow command line to override cache and checks.
+# --without-x overrides everything else, but does not touch the cache.
+echo $ac_n "checking for X""... $ac_c" 1>&6
+echo "configure:4363: checking for X" >&5
+
+# Check whether --with-x or --without-x was given.
+if test "${with_x+set}" = set; then
+ withval="$with_x"
+ :
fi
+
+# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
+if test "x$with_x" = xno; then
+ # The user explicitly disabled X.
+ have_x=disabled
+else
+ if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
+ # Both variables are already set.
+ have_x=yes
+ else
+if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # One or both of the vars are not set, and there is no cached value.
+ac_x_includes=NO ac_x_libraries=NO
+rm -fr conftestdir
+if mkdir conftestdir; then
+ cd conftestdir
+ # Make sure to not put "make" in the Imakefile rules, since we grep it out.
+ cat > Imakefile <<'EOF'
+acfindx:
+ @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
+EOF
+ if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+ eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
+ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
+ for ac_extension in a so sl; do
+ if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
+ test -f $ac_im_libdir/libX11.$ac_extension; then
+ ac_im_usrlibdir=$ac_im_libdir; break
+ fi
+ done
+ # Screen out bogus values from the imake configuration. They are
+ # bogus both because they are the default anyway, and because
+ # using them would break gcc on systems where it needs fixed includes.
+ case "$ac_im_incroot" in
+ /usr/include) ;;
+ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
+ esac
+ case "$ac_im_usrlibdir" in
+ /usr/lib | /lib) ;;
+ *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
+ esac
+ fi
+ cd ..
+ rm -fr conftestdir
fi
+
+if test "$ac_x_includes" = NO; then
+ # Guess where to find include files, by looking for this one X11 .h file.
+ test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
+
+ # First, try using that file with no special directory specified.
+cat > conftest.$ac_ext <<EOF
+#line 4425 "configure"
+#include "confdefs.h"
+#include <$x_direct_test_include>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4430: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ # We can compile using X headers with no special include directory.
+ac_x_includes=
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ # Look for the header file in a standard set of common directories.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+ for ac_dir in \
+ /usr/X11/include \
+ /usr/X11R6/include \
+ /usr/X11R5/include \
+ /usr/X11R4/include \
+ \
+ /usr/include/X11 \
+ /usr/include/X11R6 \
+ /usr/include/X11R5 \
+ /usr/include/X11R4 \
+ \
+ /usr/local/X11/include \
+ /usr/local/X11R6/include \
+ /usr/local/X11R5/include \
+ /usr/local/X11R4/include \
+ \
+ /usr/local/include/X11 \
+ /usr/local/include/X11R6 \
+ /usr/local/include/X11R5 \
+ /usr/local/include/X11R4 \
+ \
+ /usr/X386/include \
+ /usr/x386/include \
+ /usr/XFree86/include/X11 \
+ \
+ /usr/include \
+ /usr/local/include \
+ /usr/unsupported/include \
+ /usr/athena/include \
+ /usr/local/x11r5/include \
+ /usr/lpp/Xamples/include \
+ \
+ /usr/openwin/include \
+ /usr/openwin/share/include \
+ ; \
+ do
+ if test -r "$ac_dir/$x_direct_test_include"; then
+ ac_x_includes=$ac_dir
+ break
+ fi
+ done
+fi
+rm -f conftest*
+fi # $ac_x_includes = NO
+
+if test "$ac_x_libraries" = NO; then
+ # Check for the libraries.
+
+ test -z "$x_direct_test_library" && x_direct_test_library=Xt
+ test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
+
+ # See if we find them without any special options.
+ # Don't add to $LIBS permanently.
+ ac_save_LIBS="$LIBS"
+ LIBS="-l$x_direct_test_library $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4499 "configure"
+#include "confdefs.h"
+
+int main() {
+${x_direct_test_function}()
+; return 0; }
+EOF
+if { (eval echo configure:4506: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ LIBS="$ac_save_LIBS"
+# We can link X programs with no special library path.
+ac_x_libraries=
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ LIBS="$ac_save_LIBS"
+# First see if replacing the include by lib works.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
+ /usr/X11/lib \
+ /usr/X11R6/lib \
+ /usr/X11R5/lib \
+ /usr/X11R4/lib \
+ \
+ /usr/lib/X11 \
+ /usr/lib/X11R6 \
+ /usr/lib/X11R5 \
+ /usr/lib/X11R4 \
+ \
+ /usr/local/X11/lib \
+ /usr/local/X11R6/lib \
+ /usr/local/X11R5/lib \
+ /usr/local/X11R4/lib \
+ \
+ /usr/local/lib/X11 \
+ /usr/local/lib/X11R6 \
+ /usr/local/lib/X11R5 \
+ /usr/local/lib/X11R4 \
+ \
+ /usr/X386/lib \
+ /usr/x386/lib \
+ /usr/XFree86/lib/X11 \
+ \
+ /usr/lib \
+ /usr/local/lib \
+ /usr/unsupported/lib \
+ /usr/athena/lib \
+ /usr/local/x11r5/lib \
+ /usr/lpp/Xamples/lib \
+ /lib/usr/lib/X11 \
+ \
+ /usr/openwin/lib \
+ /usr/openwin/share/lib \
+ ; \
+do
+ for ac_extension in a so sl; do
+ if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
+ ac_x_libraries=$ac_dir
+ break 2
+ fi
+ done
+done
+fi
+rm -f conftest*
+fi # $ac_x_libraries = NO
+
+if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
+ # Didn't find X anywhere. Cache the known absence of X.
+ ac_cv_have_x="have_x=no"
+else
+ # Record where we found X for the cache.
+ ac_cv_have_x="have_x=yes \
+ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
+fi
+fi
+ fi
+ eval "$ac_cv_have_x"
+fi # $with_x != no
+
+if test "$have_x" != yes; then
+ echo "$ac_t""$have_x" 1>&6
+ no_x=yes
+else
+ # If each of the values was on the command line, it overrides each guess.
+ test "x$x_includes" = xNONE && x_includes=$ac_x_includes
+ test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
+ # Update the cache value to reflect the command line values.
+ ac_cv_have_x="have_x=yes \
+ ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
+ echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
+fi
+
+ not_really_there=""
+ if test "$no_x" = ""; then
+ if test "$x_includes" = ""; then
+ cat > conftest.$ac_ext <<EOF
+#line 4596 "configure"
+#include "confdefs.h"
+#include <X11/XIntrinsic.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4601: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ not_really_there="yes"
+fi
+rm -f conftest*
+ else
+ if test ! -r $x_includes/X11/Intrinsic.h; then
+ not_really_there="yes"
+ fi
+ fi
+ fi
+ if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
+ echo $ac_n "checking for X11 header files""... $ac_c" 1>&6
+echo "configure:4621: checking for X11 header files" >&5
+ XINCLUDES="# no special path needed"
+ cat > conftest.$ac_ext <<EOF
+#line 4624 "configure"
+#include "confdefs.h"
+#include <X11/Intrinsic.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4629: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ XINCLUDES="nope"
+fi
+rm -f conftest*
+ if test "$XINCLUDES" = nope; then
+ dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
+ for i in $dirs ; do
+ if test -r $i/X11/Intrinsic.h; then
+ echo "$ac_t""$i" 1>&6
+ XINCLUDES=" -I$i"
+ break
+ fi
+ done
+ fi
+ else
+ if test "$x_includes" != ""; then
+ XINCLUDES=-I$x_includes
+ else
+ XINCLUDES="# no special path needed"
+ fi
+ fi
+ if test "$XINCLUDES" = nope; then
+ echo "$ac_t""couldn't find any!" 1>&6
+ XINCLUDES="# no include files found"
+ fi
+
+ if test "$no_x" = yes; then
+ echo $ac_n "checking for X11 libraries""... $ac_c" 1>&6
+echo "configure:4665: checking for X11 libraries" >&5
+ XLIBSW=nope
+ dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/lib/X11 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
+ for i in $dirs ; do
+ if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then
+ echo "$ac_t""$i" 1>&6
+ XLIBSW="-L$i -lX11"
+ x_libraries="$i"
+ break
+ fi
+ done
+ else
+ if test "$x_libraries" = ""; then
+ XLIBSW=-lX11
+ else
+ XLIBSW="-L$x_libraries -lX11"
+ fi
+ fi
+ if test "$XLIBSW" = nope ; then
+ echo $ac_n "checking for XCreateWindow in -lXwindow""... $ac_c" 1>&6
+echo "configure:4685: checking for XCreateWindow in -lXwindow" >&5
+ac_lib_var=`echo Xwindow'_'XCreateWindow | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lXwindow $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4693 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char XCreateWindow();
+
+int main() {
+XCreateWindow()
+; return 0; }
+EOF
+if { (eval echo configure:4704: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ XLIBSW=-lXwindow
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test "$XLIBSW" = nope ; then
+ echo "$ac_t""couldn't find any! Using -lX11." 1>&6
+ XLIBSW=-lX11
+ fi
+
+ #--------------------------------------------------------------------
+ # Various manipulations on the search path used at runtime to
+ # find shared libraries:
+ # 1. If the X library binaries are in a non-standard directory,
+ # add the X library location into that search path.
+ # 2. On systems such as AIX and Ultrix that use "-L" as the
+ # search path option, colons cannot be used to separate
+ # directories from each other. Change colons to " -L".
+ # 3. Create two sets of search flags, one for use in cc lines
+ # and the other for when the linker is invoked directly. In
+ # the second case, '-Wl,' must be stripped off and commas must
+ # be replaced by spaces.
+ #--------------------------------------------------------------------
+
+ #
+ # CYGNUS LOCAL: statically link on Solaris, HPUX & SunOS so that
+ # we don't have problems with people not having libraries
+ # installed or not having LD_LIBRARY_PATH set.
+ #
+
+ case "$host" in
+ #
+ # gdb linked statically w/ Solaris iff GCC and GNU ld are used,
+ # otherwise dynamic
+ #
+ sparc-sun-solaris2*)
+ sol_xlibsw=
+ if test "x$GCC" = "xyes" ; then
+ # This is probably the simplest way to test for GNU ld.
+ # It only works with relatively recent versions of GNU
+ # ld.
+ gld_text=`$CC -Wl,--version 2>&1 | sed 1q`
+ case "$gld_text" in
+ GNU* | *BFD*)
+ # Why do we link against libX11 twice? Because the
+ # Openwin X11 and Xext libraries are seriously broken.
+ sol_xlibsw="-Wl,-Bstatic $XLIBSW -lXext -lX11 -Wl,-Bdynamic"
+ ;;
+ esac
+ fi
+ if test -z "$sol_xlibsw"; then
+ if test "x$x_libraries" != "x"; then
+ XLIBSW="$XLIBSW -R$x_libraries"
+ fi
+ else
+ XLIBSW=$sol_xlibsw
+ suppress_enable_shared=yes
+ fi
+ ;;
+ #
+ # gdb linked statically w/ SunOS or HPUX
+ #
+ m68k-hp-hpux*|hppa*-hp-hpux*|sparc-sun-sunos*)
+ if test "x$x_libraries" != "x" ;
+ then
+ XLIBSW="$x_libraries/libX11.a"
+ else
+ XLIBSW="/usr/lib/libX11.a"
+ fi
+ suppress_enable_shared=yes
+ ;;
+ #
+ # default is to link dynamically
+ #
+ *)
+ ;;
+ esac
+ #
+ # END CYGNUS LOCAL
+
+
+ #--------------------------------------------------------------------
+ # Check for the existence of various libraries. The order here
+ # is important, so that then end up in the right order in the
+ # command line generated by make. The -lsocket and -lnsl libraries
+ # require a couple of special tricks:
+ # 1. Use "connect" and "accept" to check for -lsocket, and
+ # "gethostbyname" to check for -lnsl.
+ # 2. Use each function name only once: can't redo a check because
+ # autoconf caches the results of the last check and won't redo it.
+ # 3. Use -lnsl and -lsocket only if they supply procedures that
+ # aren't already present in the normal libraries. This is because
+ # IRIX 5.2 has libraries, but they aren't needed and they're
+ # bogus: they goof up name resolution if used.
+ # 4. On some SVR4 systems, can't use -lsocket without -lnsl too.
+ # To get around this problem, check for both libraries together
+ # if -lsocket doesn't work by itself.
+ #--------------------------------------------------------------------
+
+ echo $ac_n "checking for main in -lXbsd""... $ac_c" 1>&6
+echo "configure:4820: checking for main in -lXbsd" >&5
+ac_lib_var=`echo Xbsd'_'main | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lXbsd $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4828 "configure"
+#include "confdefs.h"
+
+int main() {
+main()
+; return 0; }
+EOF
+if { (eval echo configure:4835: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SOCKLIBSW="$SOCKLIBSW -lXbsd"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+ # CYGNUS LOCAL: Store any socket library(ies) in the cache, and don't
+ # mess up the cache values of the functions we check for.
+ echo $ac_n "checking for socket libraries""... $ac_c" 1>&6
+echo "configure:4859: checking for socket libraries" >&5
+if eval "test \"`echo '$''{'sim_cv_lib_sockets'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ sim_cv_lib_sockets=
+ sim_checkBoth=0
+ unset ac_cv_func_connect
+ echo $ac_n "checking for connect""... $ac_c" 1>&6
+echo "configure:4867: checking for connect" >&5
+if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4872 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char connect(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_connect) || defined (__stub___connect)
+choke me
+#else
+connect();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:4895: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_connect=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_connect=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ sim_checkSocket=0
+else
+ echo "$ac_t""no" 1>&6
+sim_checkSocket=1
+fi
+
+ if test "$sim_checkSocket" = 1; then
+ unset ac_cv_func_connect
+ echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
+echo "configure:4918: checking for main in -lsocket" >&5
+ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lsocket $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4926 "configure"
+#include "confdefs.h"
+
+int main() {
+main()
+; return 0; }
+EOF
+if { (eval echo configure:4933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ sim_cv_lib_sockets="-lsocket"
+else
+ echo "$ac_t""no" 1>&6
+sim_checkBoth=1
+fi
+
+ fi
+ if test "$sim_checkBoth" = 1; then
+ sim_oldLibs=$SOCKLIBSW
+ SOCKLIBSW="$SOCKLIBSW -lsocket -lnsl"
+ unset ac_cv_func_accept
+ echo $ac_n "checking for accept""... $ac_c" 1>&6
+echo "configure:4960: checking for accept" >&5
+if eval "test \"`echo '$''{'ac_cv_func_accept'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4965 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char accept(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char accept();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_accept) || defined (__stub___accept)
+choke me
+#else
+accept();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:4988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_accept=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_accept=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'accept`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ sim_checkNsl=0
+ sim_cv_lib_sockets="-lsocket -lnsl"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ unset ac_cv_func_accept
+ SOCKLIBSW=$sim_oldLibs
+ fi
+ unset ac_cv_func_gethostbyname
+ sim_oldLibs=$SOCKLIBSW
+ SOCKLIBSW="$SOCKLIBSW $sim_cv_lib_sockets"
+ echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
+echo "configure:5015: checking for gethostbyname" >&5
+if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5020 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char gethostbyname(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
+choke me
+#else
+gethostbyname();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:5043: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_gethostbyname=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_gethostbyname=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
+echo "configure:5061: checking for main in -lnsl" >&5
+ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lnsl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5069 "configure"
+#include "confdefs.h"
+
+int main() {
+main()
+; return 0; }
+EOF
+if { (eval echo configure:5076: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ sim_cv_lib_sockets="$sim_cv_lib_sockets -lnsl"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+ unset ac_cv_func_gethostbyname
+ SOCKLIBSW=$sim_oldSOCKLIBSW
+
+fi
+
+echo "$ac_t""$sim_cv_lib_sockets" 1>&6
+ test -z "$sim_cv_lib_sockets" || SOCKLIBSW="$SOCKLIBSW $sim_cv_lib_sockets"
+
+ mips_extra_libs="-L${withval}/lib -lgpu2 -lm $XLIBSW $SOCKLIBSW"
+ cat > simConfig.sh << --EOF--
+mips_extra_libs="$mips_extra_libs"
+--EOF--
+
+else
+ { echo "configure: error: "Directory ${withval} does not exist."" 1>&2; exit 1; };
+fi
+fi
+
+
# Enable target accurate FP library
# Check whether --with-sim-funit or --without-sim-funit was given.
if test "${with_sim_funit+set}" = set; then
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4174: checking for $ac_hdr" >&5
+echo "configure:5136: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4179 "configure"
+#line 5141 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4184: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:5146: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
done
echo $ac_n "checking for fabs in -lm""... $ac_c" 1>&6
-echo "configure:4211: checking for fabs in -lm" >&5
+echo "configure:5173: checking for fabs in -lm" >&5
ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4219 "configure"
+#line 5181 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
fabs()
; return 0; }
EOF
-if { (eval echo configure:4230: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5192: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in aint anint sqrt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4260: checking for $ac_func" >&5
+echo "configure:5222: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4265 "configure"
+#line 5227 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4288: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+ echo "$CONFIG_STATUS generated by autoconf version 2.12.2"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@sim_m16_flags@%$sim_m16_flags%g
s%@sim_gen@%$sim_gen%g
s%@mips_extra_objs@%$mips_extra_objs%g
+s%@mips_igen_engine@%$mips_igen_engine%g
s%@mips_extra_libs@%$mips_extra_libs%g
CEOF
# start-sanitize-r5900
mips64r59*-*-*) mips_endian=LITTLE_ENDIAN ;;
# end-sanitize-r5900
+ mips64el*-*-*) mips_endian=LITTLE_ENDIAN ;;
mips64*-*-*) default_endian=BIG_ENDIAN ;;
mips16*-*-*) default_endian=BIG_ENDIAN ;;
mips*-*-*) default_endian=BIG_ENDIAN ;;
# start-sanitize-r5900
mips64r59*-*-*) mips_bitsize=64 ; mips_msb=63 ; mips_addr_bitsize=32;;
# end-sanitize-r5900
+# start-sanitize-sky
+ mips64*-sky*-*) mips_bitsize=64 ; mips_msb=63 ; mips_addr_bitsize=32;;
+# end-sanitize-sky
mips64*-*-*) mips_bitsize=64 ; mips_msb=63 ;;
mips16*-*-*) mips_bitsize=64 ; mips_msb=63 ;;
mips*-*-*) mips_bitsize=32 ; mips_msb=31 ;;
# start-sanitize-r5900
mips64r59*-*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;
# end-sanitize-r5900
+# start-sanitize-sky
+ mips64*-sky*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;
+# end-sanitize-sky
mips64*-*-*) mips_fpu=HARD_FLOATING_POINT ;;
mips16*-*-*) mips_fpu=HARD_FLOATING_POINT ;;
mips*-*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;
# end-sanitize-tx3904
# start-sanitize-sky
mips64r59*-sky-*)
- mips_extra_objs="$mips_extra_objs "'$(SIM_SKY_OBJS)'
+ mips_extra_objs='$(SIM_SKY_OBJS)'
SIM_SUBTARGET="-DTARGET_SKY -DWITH_DEVICES=1 -DDEVICE_INIT=1"
;;
+ mips64*-skyb-*)
+ mips_extra_objs='$(SIM_SKY_OBJS)'
+ SIM_SUBTARGET="-DTARGET_SKY -DTARGET_SKY_B -DWITH_DEVICES=1 -DDEVICE_INIT=1"
+ ;;
# end-sanitize-sky
*)
mips_extra_objs=""
AC_SUBST(mips_extra_objs)
+# Choose simulator engine
+case "${target}" in
+# start-sanitize-sky
+ mips64r59*-sky-*)
+ mips_igen_engine=""
+ ;;
+ mips64*-skyb-*)
+ mips_igen_engine=""
+ ;;
+# end-sanitize-sky
+ *) mips_igen_engine="engine.o"
+ ;;
+esac
+AC_SUBST(mips_igen_engine)
+
+
AC_PATH_X
mips_extra_libs=""
# start-sanitize-sky
then
SIM_SUBTARGET="${SIM_SUBTARGET} -DSKY_GPU2 -I${withval}/include"
mips_extra_libs="-L${withval}/lib -lgpu2 -L${x_libraries} -lX11 -lXext"
+ WITH_GPU2="yes" ; export WITH_GPU2
+
+ # complex X/etc. detection; stolen shamelessly from tcl/tk/gdb configury. --angela
+
+ #--------------------------------------------------------------------
+ # Locate the X11 header files and the X11 library archive. Try
+ # the ac_path_x macro first, but if it doesn't find the X stuff
+ # (e.g. because there's no xmkmf program) then check through
+ # a list of possible directories. Under some conditions the
+ # autoconf macro will return an include directory that contains
+ # no include files, so double-check its result just to be safe.
+ #--------------------------------------------------------------------
+
+ AC_PATH_X
+ not_really_there=""
+ if test "$no_x" = ""; then
+ if test "$x_includes" = ""; then
+ AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes")
+ else
+ if test ! -r $x_includes/X11/Intrinsic.h; then
+ not_really_there="yes"
+ fi
+ fi
+ fi
+ if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
+ AC_MSG_CHECKING(for X11 header files)
+ XINCLUDES="# no special path needed"
+ AC_TRY_CPP([#include <X11/Intrinsic.h>], , XINCLUDES="nope")
+ if test "$XINCLUDES" = nope; then
+ dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
+ for i in $dirs ; do
+ if test -r $i/X11/Intrinsic.h; then
+ AC_MSG_RESULT($i)
+ XINCLUDES=" -I$i"
+ break
+ fi
+ done
+ fi
+ else
+ if test "$x_includes" != ""; then
+ XINCLUDES=-I$x_includes
+ else
+ XINCLUDES="# no special path needed"
+ fi
+ fi
+ if test "$XINCLUDES" = nope; then
+ AC_MSG_RESULT(couldn't find any!)
+ XINCLUDES="# no include files found"
+ fi
+
+ if test "$no_x" = yes; then
+ AC_MSG_CHECKING(for X11 libraries)
+ XLIBSW=nope
+ dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/lib/X11 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
+ for i in $dirs ; do
+ if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then
+ AC_MSG_RESULT($i)
+ XLIBSW="-L$i -lX11"
+ x_libraries="$i"
+ break
+ fi
+ done
+ else
+ if test "$x_libraries" = ""; then
+ XLIBSW=-lX11
+ else
+ XLIBSW="-L$x_libraries -lX11"
+ fi
+ fi
+ if test "$XLIBSW" = nope ; then
+ AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow)
+ fi
+ if test "$XLIBSW" = nope ; then
+ AC_MSG_RESULT(couldn't find any! Using -lX11.)
+ XLIBSW=-lX11
+ fi
+
+ #--------------------------------------------------------------------
+ # Various manipulations on the search path used at runtime to
+ # find shared libraries:
+ # 1. If the X library binaries are in a non-standard directory,
+ # add the X library location into that search path.
+ # 2. On systems such as AIX and Ultrix that use "-L" as the
+ # search path option, colons cannot be used to separate
+ # directories from each other. Change colons to " -L".
+ # 3. Create two sets of search flags, one for use in cc lines
+ # and the other for when the linker is invoked directly. In
+ # the second case, '-Wl,' must be stripped off and commas must
+ # be replaced by spaces.
+ #--------------------------------------------------------------------
+
+ #
+ # CYGNUS LOCAL: statically link on Solaris, HPUX & SunOS so that
+ # we don't have problems with people not having libraries
+ # installed or not having LD_LIBRARY_PATH set.
+ #
+
+ case "$host" in
+ #
+ # gdb linked statically w/ Solaris iff GCC and GNU ld are used,
+ # otherwise dynamic
+ #
+ sparc-sun-solaris2*)
+ sol_xlibsw=
+ if test "x$GCC" = "xyes" ; then
+ # This is probably the simplest way to test for GNU ld.
+ # It only works with relatively recent versions of GNU
+ # ld.
+ gld_text=`$CC -Wl,--version 2>&1 | sed 1q`
+ case "$gld_text" in
+ GNU* | *BFD*)
+ # Why do we link against libX11 twice? Because the
+ # Openwin X11 and Xext libraries are seriously broken.
+ sol_xlibsw="-Wl,-Bstatic $XLIBSW -lXext -lX11 -Wl,-Bdynamic"
+ ;;
+ esac
+ fi
+ if test -z "$sol_xlibsw"; then
+ if test "x$x_libraries" != "x"; then
+ XLIBSW="$XLIBSW -R$x_libraries"
+ fi
+ else
+ XLIBSW=$sol_xlibsw
+ suppress_enable_shared=yes
+ fi
+ ;;
+ #
+ # gdb linked statically w/ SunOS or HPUX
+ #
+ m68k-hp-hpux*|hppa*-hp-hpux*|sparc-sun-sunos*)
+ if test "x$x_libraries" != "x" ;
+ then
+ XLIBSW="$x_libraries/libX11.a"
+ else
+ XLIBSW="/usr/lib/libX11.a"
+ fi
+ suppress_enable_shared=yes
+ ;;
+ #
+ # default is to link dynamically
+ #
+ *)
+ ;;
+ esac
+ #
+ # END CYGNUS LOCAL
+
+
+ #--------------------------------------------------------------------
+ # Check for the existence of various libraries. The order here
+ # is important, so that then end up in the right order in the
+ # command line generated by make. The -lsocket and -lnsl libraries
+ # require a couple of special tricks:
+ # 1. Use "connect" and "accept" to check for -lsocket, and
+ # "gethostbyname" to check for -lnsl.
+ # 2. Use each function name only once: can't redo a check because
+ # autoconf caches the results of the last check and won't redo it.
+ # 3. Use -lnsl and -lsocket only if they supply procedures that
+ # aren't already present in the normal libraries. This is because
+ # IRIX 5.2 has libraries, but they aren't needed and they're
+ # bogus: they goof up name resolution if used.
+ # 4. On some SVR4 systems, can't use -lsocket without -lnsl too.
+ # To get around this problem, check for both libraries together
+ # if -lsocket doesn't work by itself.
+ #--------------------------------------------------------------------
+
+ AC_CHECK_LIB(Xbsd, main, [SOCKLIBSW="$SOCKLIBSW -lXbsd"])
+
+ # CYGNUS LOCAL: Store any socket library(ies) in the cache, and don't
+ # mess up the cache values of the functions we check for.
+ AC_CACHE_CHECK([for socket libraries], sim_cv_lib_sockets,
+ [sim_cv_lib_sockets=
+ sim_checkBoth=0
+ unset ac_cv_func_connect
+ AC_CHECK_FUNC(connect, sim_checkSocket=0, sim_checkSocket=1)
+ if test "$sim_checkSocket" = 1; then
+ unset ac_cv_func_connect
+ AC_CHECK_LIB(socket, main, sim_cv_lib_sockets="-lsocket",
+ sim_checkBoth=1)
+ fi
+ if test "$sim_checkBoth" = 1; then
+ sim_oldLibs=$SOCKLIBSW
+ SOCKLIBSW="$SOCKLIBSW -lsocket -lnsl"
+ unset ac_cv_func_accept
+ AC_CHECK_FUNC(accept,
+ [sim_checkNsl=0
+ sim_cv_lib_sockets="-lsocket -lnsl"])
+ unset ac_cv_func_accept
+ SOCKLIBSW=$sim_oldLibs
+ fi
+ unset ac_cv_func_gethostbyname
+ sim_oldLibs=$SOCKLIBSW
+ SOCKLIBSW="$SOCKLIBSW $sim_cv_lib_sockets"
+ AC_CHECK_FUNC(gethostbyname, ,
+ [AC_CHECK_LIB(nsl, main,
+ [sim_cv_lib_sockets="$sim_cv_lib_sockets -lnsl"])])
+ unset ac_cv_func_gethostbyname
+ SOCKLIBSW=$sim_oldSOCKLIBSW
+ ])
+ test -z "$sim_cv_lib_sockets" || SOCKLIBSW="$SOCKLIBSW $sim_cv_lib_sockets"
+
+ mips_extra_libs="-L${withval}/lib -lgpu2 -lm $XLIBSW $SOCKLIBSW"
+ cat > simConfig.sh << --EOF--
+mips_extra_libs="$mips_extra_libs"
+--EOF--
+
else
AC_MSG_ERROR("Directory ${withval} does not exist.");
fi])dnl
+
+
# Enable target accurate FP library
AC_ARG_WITH(sim-funit,
[ --with-sim-funit=path Use target FP library under given directory],
#include "sim-assert.h"
#include "sim-hw.h"
+#if WITH_IGEN
+#include "itable.h"
+#endif
+
/* start-sanitize-sky */
#ifdef TARGET_SKY
#include "sky-vu.h"
#include "sky-vpe.h"
#include "sky-libvpe.h"
-#include "sky-pke.h"
+#include "sky-vif.h"
#include "idecode.h"
#include "sky-gdb.h"
#endif
#ifdef TARGET_SKY
#undef MEM_SIZE
#define MEM_SIZE (16 << 20) /* 16 MB */
+#undef MONITOR_SIZE
+#define MONITOR_SIZE 0x100000 /* 1MB */
#endif
/* end-sanitize-sky */
static void open_trace PARAMS((SIM_DESC sd));
#endif /* TRACE */
+#if WITH_IGEN
+static const char * get_insn_name (sim_cpu *, int);
+#endif
+
/* simulation target board. NULL=canonical */
static char* board = NULL;
if (SR & status_IE)
{
interrupt_pending = 0;
- SignalExceptionInterrupt ();
+ SignalExceptionInterrupt (1); /* interrupt "1" */
}
else if (!interrupt_pending)
sim_events_schedule (sd, 1, interrupt_event, data);
STATE_WATCHPOINTS (sd)->sizeof_pc = sizeof (PC);
STATE_WATCHPOINTS (sd)->interrupt_handler = interrupt_event;
+#if WITH_IGEN
+ /* Initialize the mechanism for doing insn profiling. */
+ CPU_INSN_NAME (cpu) = get_insn_name;
+ CPU_MAX_INSNS (cpu) = nr_itable_entries;
+#endif
+
STATE = 0;
if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK)
{
/* match VIRTUAL memory layout of JMR-TX3904 board */
+ /* --- environment --- */
+
+ STATE_ENVIRONMENT (sd) = OPERATING_ENVIRONMENT;
+
/* --- memory --- */
/* ROM: 0x9FC0_0000 - 0x9FFF_FFFF and 0xBFC0_0000 - 0xBFFF_FFFF */
32 * 1024 * 1024, /* 32 MB */
0xA8000000);
+ /* Dummy memory regions for unsimulated devices */
+
+ sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx", 0xFFFFE010, 0x00c); /* EBIF */
+ sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx", 0xFFFF9000, 0x200); /* EBIF */
+ sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx", 0xFFFFF500, 0x300); /* PIO */
+
/* --- simulated devices --- */
sim_hw_parse (sd, "/tx3904irc@0xffffc000/reg 0xffffc000 0x20");
sim_hw_parse (sd, "/tx3904cpu");
sim_hw_parse (sd, "/tx3904tmr@0xfffff000/reg 0xfffff000 0x100");
sim_hw_parse (sd, "/tx3904tmr@0xfffff100/reg 0xfffff100 0x100");
sim_hw_parse (sd, "/tx3904tmr@0xfffff200/reg 0xfffff200 0x100");
-
+ sim_hw_parse (sd, "/tx3904sio@0xfffff300/reg 0xfffff300 0x100");
+ {
+ /* FIXME: poking at dv-sockser internals, use tcp backend if
+ --sockser_addr option was given.*/
+ extern char* sockser_addr;
+ if(sockser_addr == NULL)
+ sim_hw_parse (sd, "/tx3904sio@0xfffff300/backend stdio");
+ else
+ sim_hw_parse (sd, "/tx3904sio@0xfffff300/backend tcp");
+ }
+ sim_hw_parse (sd, "/tx3904sio@0xfffff400/reg 0xfffff400 0x100");
+ sim_hw_parse (sd, "/tx3904sio@0xfffff400/backend stdio");
+
/* -- device connections --- */
sim_hw_parse (sd, "/tx3904irc > ip level /tx3904cpu");
sim_hw_parse (sd, "/tx3904tmr@0xfffff000 > int tmr0 /tx3904irc");
sim_hw_parse (sd, "/tx3904tmr@0xfffff100 > int tmr1 /tx3904irc");
sim_hw_parse (sd, "/tx3904tmr@0xfffff200 > int tmr2 /tx3904irc");
+ sim_hw_parse (sd, "/tx3904sio@0xfffff300 > int sio0 /tx3904irc");
+ sim_hw_parse (sd, "/tx3904sio@0xfffff400 > int sio1 /tx3904irc");
/* add PAL timer & I/O module */
if(! strcmp(board, BOARD_JMR3904_PAL))
else
cpu->register_widths[rn] = 0;
}
- /* start-sanitize-r5900 */
+ /* start-sanitize-r5900 */
/* set the 5900 "upper" registers to 64 bits */
- for( rn = LAST_EMBED_REGNUM+1; rn < NUM_REGS; rn++)
+ for( rn = LAST_EMBED_REGNUM+1; rn < FIRST_COP0_REG; rn++)
cpu->register_widths[rn] = 64;
+
+ for( rn = FIRST_COP0_REG; rn < NUM_REGS; rn++)
+ cpu->register_widths[rn] = 32;
/* end-sanitize-r5900 */
/* start-sanitize-sky */
HALT_INSTRUCTION /* BREAK */ };
H2T (halt[0]);
H2T (halt[1]);
+ sim_write (sd, 0x80000000, (char *) halt, sizeof (halt));
sim_write (sd, 0x80000180, (char *) halt, sizeof (halt));
+ sim_write (sd, 0x80000200, (char *) halt, sizeof (halt));
+ sim_write (sd, 0xBFC00200, (char *) halt, sizeof (halt));
sim_write (sd, 0xBFC00380, (char *) halt, sizeof (halt));
+ sim_write (sd, 0xBFC00400, (char *) halt, sizeof (halt));
}
}
}
+
+ /* start-sanitize-sky */
+#ifdef TARGET_SKY
+ /* Default TLB initialization... */
+
+#define KPAGEMASK 0x001fe000
+#define PAGE_MASK_4K 0x00000000
+#define PAGE_MASK_16K 0x00006000
+#define PAGE_MASK_64K 0x0001e000
+#define PAGE_MASK_256K 0x0007e000
+#define PAGE_MASK_1M 0x001fe000
+#define PAGE_MASK_4M 0x007fe000
+#define PAGE_MASK_16M 0x01ffe000
+
+#define SET_TLB(index, page_mask, entry_hi, entry_lo0, entry_lo1) \
+ TLB[index].mask = page_mask; \
+ TLB[index].hi = entry_hi; \
+ TLB[index].lo0 = entry_lo0; \
+ TLB[index].lo1 = entry_lo1
+
+ SET_TLB(0, PAGE_MASK_16M, 0x00000000, 0x0000001e, 0x0004001e);/*0-32M*/
+
+#endif /* TARGET_SKY */
+ /* end-sanitize-sky */
+
return sd;
}
}
#endif /* TRACE */
+#if WITH_IGEN
+/* Return name of an insn, used by insn profiling. */
+static const char *
+get_insn_name (sim_cpu *cpu, int i)
+{
+ return itable[i].name;
+}
+#endif
+
void
sim_close (sd, quitting)
SIM_DESC sd;
HI1 = T2H_8(*(unsigned64*)memory);
return 8;
}
+
+ if (rn >= FIRST_COP0_REG && rn < (FIRST_COP0_REG+NUM_COP0_REGS))
+ {
+ switch (rn - FIRST_COP0_REG)
+ {
+ case 12: /* Status */
+ case 13: /* Cause */
+ return -1; /* Already done in regular register set */
+ case 14:
+ EPC = T2H_4(*((unsigned32*) memory));
+ break;
+ case 16:
+ C0_CONFIG = T2H_4(*((unsigned32*) memory));
+ break;
+ case 17: /* Debug */
+ Debug = T2H_4(*((unsigned32*) memory));
+ break;
+ case 18: /* Perf */
+ COP0_GPR[rn - FIRST_COP0_REG + 7] = T2H_4(*((unsigned32*) memory));
+ break;
+ case 19: /* TagLo */
+ case 20: /* TagHi */
+ case 21: /* ErrorEPC */
+ COP0_GPR[rn - FIRST_COP0_REG + 9] = T2H_4(*((unsigned32*) memory));
+ break;
+ default:
+ COP0_GPR[rn - FIRST_COP0_REG] = T2H_4(*((unsigned32*) memory));
+ break;
+ }
+
+ return 4;
+ }
/* end-sanitize-r5900 */
/* start-sanitize-sky */
if( rn < NUM_VU_REGS )
{
+#ifdef TARGET_SKY_B
+ sim_io_eprintf( sd, "Invalid VU register (register store ignored)\n" );
+ return 0;
+#else
if (rn < NUM_VU_INTEGER_REGS)
return write_vu_int_reg (&(vu0_device.regs), rn, memory);
else if (rn >= FIRST_VEC_REG)
else switch (rn - NUM_VU_INTEGER_REGS)
{
case 0:
- return write_vu_special_reg (&vu0_device, VU_REG_CIA,
- memory);
- case 1:
- return write_vu_misc_reg (&(vu0_device.regs), VU_REG_MR,
- memory);
- case 2: /* VU0 has no P register */
+ return write_vu_special_reg (&vu0_device, VU_REG_CIA, memory);
+
+ case 1: /* Can't write TPC register */
+ case 2: /* or VPU_STAT */
+ case 4: /* or MAC */
+ case 9: /* VU0 has no P register */
return 4;
+
case 3:
- return write_vu_misc_reg (&(vu0_device.regs), VU_REG_MI,
- memory);
- case 4:
- return write_vu_misc_reg (&(vu0_device.regs), VU_REG_MQ,
- memory);
+ return write_vu_misc_reg(&(vu0_device.regs), VU_REG_MST, memory);
+ case 5:
+ return write_vu_misc_reg(&(vu0_device.regs), VU_REG_MCP, memory);
+ case 6:
+ return write_vu_special_reg (&vu0_device, VU_REG_CMSAR0, memory);
+ case 7:
+ return write_vu_special_reg (&vu0_device, VU_REG_FBRST, memory);
+ case 8:
+ return write_vu_misc_reg (&(vu0_device.regs), VU_REG_MR, memory);
+ case 10:
+ return write_vu_misc_reg (&(vu0_device.regs), VU_REG_MI, memory);
+ case 11:
+ return write_vu_misc_reg (&(vu0_device.regs), VU_REG_MQ, memory);
default:
return write_vu_acc_reg (&(vu0_device.regs),
- rn - (NUM_VU_INTEGER_REGS + 5),
+ rn - (NUM_VU_INTEGER_REGS + 12),
memory);
}
+#endif /* ! TARGET_SKY_B */
}
rn = rn - NUM_VU_REGS;
else switch (rn - NUM_VU_INTEGER_REGS)
{
case 0:
- return write_vu_special_reg (&vu1_device, VU_REG_CIA,
- memory);
- case 1:
- return write_vu_misc_reg (&(vu1_device.regs), VU_REG_MR,
- memory);
- case 2:
- return write_vu_misc_reg (&(vu1_device.regs), VU_REG_MP,
- memory);
+ return write_vu_special_reg (&vu1_device, VU_REG_CIA, memory);
+
+ case 1: /* Can't write TPC register */
+ case 2: /* or VPU_STAT */
+ case 4: /* or MAC */
+ case 7: /* VU1 has no FBRST register */
+ return 4;
+
case 3:
- return write_vu_misc_reg (&(vu1_device.regs), VU_REG_MI,
- memory);
- case 4:
- return write_vu_misc_reg (&(vu1_device.regs), VU_REG_MQ,
- memory);
+ return write_vu_misc_reg(&(vu1_device.regs), VU_REG_MST, memory);
+ case 5:
+ return write_vu_misc_reg(&(vu1_device.regs), VU_REG_MCP, memory);
+ case 6: /* CMSAR1 is actually part of VU0 */
+#ifdef TARGET_SKY_B
+ return 0;
+#else
+ return write_vu_special_reg (&vu0_device, VU_REG_CMSAR1, memory);
+#endif /* ! TARGET_SKY_B */
+ case 8:
+ return write_vu_misc_reg (&(vu1_device.regs), VU_REG_MR, memory);
+ case 9:
+ return write_vu_misc_reg (&(vu1_device.regs), VU_REG_MP, memory);
+ case 10:
+ return write_vu_misc_reg (&(vu1_device.regs), VU_REG_MI, memory);
+ case 11:
+ return write_vu_misc_reg (&(vu1_device.regs), VU_REG_MQ, memory);
default:
return write_vu_acc_reg (&(vu1_device.regs),
- rn - (NUM_VU_INTEGER_REGS + 5),
+ rn - (NUM_VU_INTEGER_REGS + 12),
memory);
}
}
if (rn < NUM_VIF_REGS)
{
+#ifdef TARGET_SKY_B
+ sim_io_eprintf( sd, "Invalid VIF register (register store ignored)\n" );
+ return 0;
+#else
if (rn < NUM_VIF_REGS-1)
- return write_pke_reg (&pke0_device, rn, memory);
+ return write_vif_reg (&vif0_device, rn, memory);
else
{
sim_io_eprintf( sd, "Can't write vif0_pc (store ignored)\n" );
return 0;
}
+#endif /* ! TARGET_SKY_B */
}
rn -= NUM_VIF_REGS; /* VIF1 registers are last */
if (rn < NUM_VIF_REGS)
{
if (rn < NUM_VIF_REGS-1)
- return write_pke_reg (&pke1_device, rn, memory);
+ return write_vif_reg (&vif1_device, rn, memory);
else
{
sim_io_eprintf( sd, "Can't write vif1_pc (store ignored)\n" );
*((unsigned64*)memory) = H2T_8(HI1);
return 8;
}
+
+ if (rn >= FIRST_COP0_REG && rn < (FIRST_COP0_REG+NUM_COP0_REGS))
+ {
+ switch (rn - FIRST_COP0_REG)
+ {
+ case 12: /* Status */
+ case 13: /* Cause */
+ return -1; /* Already done in regular register set */
+ case 14:
+ *((unsigned32*) memory) = H2T_4(EPC);
+ break;
+ case 16:
+ *((unsigned32*) memory) = H2T_4(C0_CONFIG);
+ break;
+ case 17: /* Debug */
+ *((unsigned32*) memory) = H2T_4(Debug);
+ break;
+ case 18: /* Perf */
+ *((unsigned32*) memory) = H2T_4(COP0_GPR[rn - FIRST_COP0_REG + 7]);
+ break;
+ case 19: /* TagLo */
+ case 20: /* TagHi */
+ case 21: /* ErrorEPC */
+ *((unsigned32*) memory) = H2T_4(COP0_GPR[rn - FIRST_COP0_REG + 9]);
+ break;
+ default:
+ *((unsigned32*) memory) = H2T_4(COP0_GPR[rn - FIRST_COP0_REG]);
+ break;
+ }
+
+ return 4;
+ }
/* end-sanitize-r5900 */
/* start-sanitize-sky */
if (rn < NUM_VU_REGS)
{
+#ifdef TARGET_SKY_B
+ sim_io_eprintf( sd, "Invalid VU register (register fetch ignored)\n" );
+ return 0;
+#else
if (rn < NUM_VU_INTEGER_REGS)
return read_vu_int_reg (&(vu0_device.regs), rn, memory);
else if (rn >= FIRST_VEC_REG)
else switch (rn - NUM_VU_INTEGER_REGS)
{
case 0:
- return read_vu_special_reg(&vu0_device, VU_REG_CIA, memory);
+ return read_vu_special_reg (&vu0_device, VU_REG_CIA, memory);
case 1:
- return read_vu_misc_reg (&(vu0_device.regs), VU_REG_MR,
- memory);
- case 2: /* VU0 has no P register */
- *((int *) memory) = 0;
- return 4;
+ return read_vu_misc_reg(&(vu0_device.regs), VU_REG_MTPC, memory);
+ case 2:
+ return read_vu_special_reg (&vu0_device, VU_REG_STAT, memory);
case 3:
- return read_vu_misc_reg (&(vu0_device.regs), VU_REG_MI,
- memory);
+ return read_vu_misc_reg (&(vu0_device.regs), VU_REG_MST, memory);
case 4:
- return read_vu_misc_reg (&(vu0_device.regs), VU_REG_MQ,
- memory);
+ return read_vu_misc_reg (&(vu0_device.regs), VU_REG_MMC, memory);
+ case 5:
+ return read_vu_misc_reg (&(vu0_device.regs), VU_REG_MCP, memory);
+ case 6:
+ return read_vu_special_reg (&vu0_device, VU_REG_CMSAR0, memory);
+ case 7:
+ return read_vu_special_reg (&vu0_device, VU_REG_FBRST, memory);
+ case 8:
+ return read_vu_misc_reg (&(vu0_device.regs), VU_REG_MR, memory);
+ case 9: /* VU0 has no P register */
+ *((int *) memory) = 0;
+ return 4;
+ case 10:
+ return read_vu_misc_reg (&(vu0_device.regs), VU_REG_MI, memory);
+ case 11:
+ return read_vu_misc_reg (&(vu0_device.regs), VU_REG_MQ, memory);
default:
return read_vu_acc_reg (&(vu0_device.regs),
- rn - (NUM_VU_INTEGER_REGS + 5),
+ rn - (NUM_VU_INTEGER_REGS + 12),
memory);
}
+#endif /* ! TARGET_SKY_B */
}
rn -= NUM_VU_REGS; /* VU1 registers are next */
else switch (rn - NUM_VU_INTEGER_REGS)
{
case 0:
- return read_vu_special_reg(&vu1_device, VU_REG_CIA, memory);
+ return read_vu_special_reg (&vu1_device, VU_REG_CIA, memory);
case 1:
- return read_vu_misc_reg (&(vu1_device.regs),
- VU_REG_MR, memory);
+ return read_vu_misc_reg(&(vu1_device.regs), VU_REG_MTPC, memory);
case 2:
- return read_vu_misc_reg (&(vu1_device.regs),
- VU_REG_MP, memory);
+ return read_vu_special_reg (&vu1_device, VU_REG_STAT, memory);
case 3:
- return read_vu_misc_reg (&(vu1_device.regs),
- VU_REG_MI, memory);
+ return read_vu_misc_reg (&(vu1_device.regs), VU_REG_MST, memory);
case 4:
- return read_vu_misc_reg (&(vu1_device.regs),
- VU_REG_MQ, memory);
+ return read_vu_misc_reg (&(vu1_device.regs), VU_REG_MMC, memory);
+ case 5:
+ return read_vu_misc_reg (&(vu1_device.regs), VU_REG_MCP, memory);
+ case 6: /* CMSAR1 is actually from VU0 */
+#ifdef TARGET_SKY_B
+ return 0;
+#else
+ return read_vu_special_reg (&vu0_device, VU_REG_CMSAR1, memory);
+#endif /* ! TARGET_SKY_B */
+ case 7: /* VU1 has no FBRST register */
+ *((int *) memory) = 0;
+ return 4;
+ case 8:
+ return read_vu_misc_reg (&(vu1_device.regs), VU_REG_MR, memory);
+ case 9:
+ return read_vu_misc_reg (&(vu1_device.regs), VU_REG_MP, memory);
+ case 10:
+ return read_vu_misc_reg (&(vu1_device.regs), VU_REG_MI, memory);
+ case 11:
+ return read_vu_misc_reg (&(vu1_device.regs), VU_REG_MQ, memory);
default:
return read_vu_acc_reg (&(vu1_device.regs),
- rn - (NUM_VU_INTEGER_REGS + 5),
+ rn - (NUM_VU_INTEGER_REGS + 12),
memory);
}
}
if (rn < NUM_VIF_REGS)
{
+#ifdef TARGET_SKY_B
+ sim_io_eprintf( sd, "Invalid VIF register (register fetch ignored)\n" );
+ return 0;
+#else
if (rn < NUM_VIF_REGS-2)
- return read_pke_reg (&pke0_device, rn, memory);
+ return read_vif_reg (&vif0_device, rn, memory);
else if (rn == NUM_VIF_REGS-2)
- return read_pke_pc (&pke0_device, memory);
+ return read_vif_pc (&vif0_device, memory);
else
- return read_pke_pcx (&pke0_device, memory);
+ return read_vif_pcx (&vif0_device, memory);
+#endif /* ! TARGET_SKY_B */
}
rn -= NUM_VIF_REGS; /* VIF1 registers are last */
if (rn < NUM_VIF_REGS)
{
if (rn < NUM_VIF_REGS-2)
- return read_pke_reg (&pke1_device, rn, memory);
+ return read_vif_reg (&vif1_device, rn, memory);
else if (rn == NUM_VIF_REGS-2)
- return read_pke_pc (&pke1_device, memory);
+ return read_vif_pc (&vif1_device, memory);
else
- return read_pke_pcx (&pke1_device, memory);
+ return read_vif_pcx (&vif1_device, memory);
}
sim_io_eprintf( sd, "Invalid VU register (register fetch ignored)\n" );
}
/* Simple monitor interface (currently setup for the IDT and PMON monitors) */
-static void
+void
sim_monitor (SIM_DESC sd,
sim_cpu *cpu,
address_word cia,
}
}
+
+
+/* start-sanitize-sky */
+#ifdef TARGET_SKY
+
+/* See ch. 5 of the 5900 Users' Guide. */
+void
+signal_exception (SIM_DESC sd,
+ sim_cpu *cpu,
+ address_word cia,
+ int cause, ...)
+{
+ /* int vector; */
+
+#ifdef DEBUG
+ sim_io_printf(sd,"DBG: SignalException(%d) PC = 0x%s\n",cause,pr_addr(cia));
+#endif /* DEBUG */
+
+ /* Ensure that any active atomic read/modify/write operation will fail: */
+ LLBIT = 0;
+
+ /* First, handle any simulator specific magic exceptions. These are not "real" exceptions, but
+ are exceptions which the simulator uses to implement different features. */
+
+ switch (cause) {
+
+ case SimulatorFault:
+ {
+ va_list ap;
+ char *msg;
+ va_start(ap,cause);
+ msg = va_arg(ap,char *);
+ va_end(ap);
+ sim_engine_abort (SD, CPU, NULL_CIA,
+ "FATAL: Simulator error \"%s\"\n",msg);
+ }
+
+ case DebugBreakPoint :
+ if (! (Debug & Debug_DM))
+ {
+ if (INDELAYSLOT())
+ {
+ CANCELDELAYSLOT();
+
+ Debug |= Debug_DBD; /* signaled from within in delay slot */
+ DEPC = cia - 4; /* reference the branch instruction */
+ }
+ else
+ {
+ Debug &= ~Debug_DBD; /* not signaled from within a delay slot */
+ DEPC = cia;
+ }
+
+ Debug |= Debug_DM; /* in debugging mode */
+ Debug |= Debug_DBp; /* raising a DBp exception */
+ PC = 0xBFC00200;
+ sim_engine_restart (SD, CPU, NULL, NULL_CIA);
+ }
+ break;
+
+ case ReservedInstruction :
+ {
+ va_list ap;
+ unsigned int instruction;
+ va_start(ap,cause);
+ instruction = va_arg(ap,unsigned int);
+ va_end(ap);
+ /* Provide simple monitor support using ReservedInstruction
+ exceptions. The following code simulates the fixed vector
+ entry points into the IDT monitor by causing a simulator
+ trap, performing the monitor operation, and returning to
+ the address held in the $ra register (standard PCS return
+ address). This means we only need to pre-load the vector
+ space with suitable instruction values. For systems were
+ actual trap instructions are used, we would not need to
+ perform this magic. */
+ if ((instruction & RSVD_INSTRUCTION_MASK) == RSVD_INSTRUCTION)
+ {
+ sim_monitor (SD, CPU, cia, ((instruction >> RSVD_INSTRUCTION_ARG_SHIFT) & RSVD_INSTRUCTION_ARG_MASK) );
+ /* NOTE: This assumes that a branch-and-link style
+ instruction was used to enter the vector (which is the
+ case with the current IDT monitor). */
+ sim_engine_restart (SD, CPU, NULL, RA);
+ }
+ /* Look for the mips16 entry and exit instructions, and
+ simulate a handler for them. */
+ else if ((cia & 1) != 0
+ && (instruction & 0xf81f) == 0xe809
+ && (instruction & 0x0c0) != 0x0c0)
+ {
+ mips16_entry (SD, CPU, cia, instruction);
+ sim_engine_restart (sd, NULL, NULL, NULL_CIA);
+ }
+ /* else fall through to normal exception processing */
+ sim_io_eprintf(sd,"ReservedInstruction at PC = 0x%s\n", pr_addr (cia));
+ }
+ }
+
+ /* Now we have the code for processing "real" exceptions. */
+
+ if (is5900Level2Exception(cause)) {
+ switch(cause) {
+ case NMIReset:
+ cause_set_EXC2(1);
+ break;
+ default:
+ sim_engine_abort (SD, CPU, NULL_CIA,
+ "FATAL: Unexpected level 2 exception %d\n", cause);
+ }
+ if (STATE & simDELAYSLOT)
+ {
+ STATE &= ~simDELAYSLOT;
+ COP0_ERROREPC = (cia - 4); /* reference the branch instruction */
+ CAUSE |= cause_BD2;
+ }
+ else
+ {
+ COP0_ERROREPC = cia;
+ CAUSE &= ~cause_BD2;
+ }
+
+ SR |= status_ERL;
+
+ if (cause == NMIReset)
+ PC = 0xBFC0000;
+ else
+ {
+ ASSERT(0); /* At the moment, COUNTER, DEBUG never generated. */
+ }
+ sim_engine_restart (SD, CPU, NULL, PC);
+ } else {
+ /* A level 1 exception. */
+ int refill, vector_offset;
+
+ cause_set_EXC(cause);
+ if (SR & status_EXL)
+ vector_offset = 0x180;
+ else
+ {
+ if (cause == TLBLoad || cause == TLBStore) {
+ va_list ap;
+ va_start(ap, cause);
+ refill = va_arg(ap,int);
+ va_end(ap);
+ }
+
+ if (STATE & simDELAYSLOT)
+ {
+ STATE &= ~simDELAYSLOT;
+ CAUSE |= cause_BD;
+ COP0_EPC = (cia - 4); /* reference the branch instruction */
+ }
+ else
+ {
+ COP0_EPC = cia;
+ CAUSE &= ~cause_BD;
+ }
+
+ SR |= status_EXL;
+
+ if ((cause == TLBLoad || cause == TLBStore) && refill == TLB_REFILL)
+ vector_offset = 0x000;
+ else if (cause == Interrupt)
+ vector_offset = 0x200;
+ else
+ vector_offset = 0x180;
+
+ if (SR & status_BEV)
+ PC = (signed)0xBFC00200 + vector_offset;
+ else
+ PC = (signed)0x80000000 + vector_offset;
+ }
+
+ /* Now, handle the exception. */
+ switch (cause)
+ {
+ case Interrupt:
+ {
+ va_list ap;
+ unsigned int level;
+ va_start(ap, cause);
+ level = va_arg(ap,unsigned int);
+ va_end(ap);
+ /* Interrupts arrive during event processing, no need to restart.
+ Hardware interrupts on sky target are INT1 and INT2. */
+ if ( level == 1 )
+ CAUSE |= cause_IP3; /* bit 11 */
+ else if ( level == 2 )
+ CAUSE |= cause_IP7; /* bit 15 */
+ else
+ sim_engine_abort (SD, CPU, NULL_CIA,
+ "FATAL: Unexpected interrupt level %d\n", level);
+ return;
+ }
+
+ case NMIReset:
+ ASSERT(0); /* NMIReset is a level 0 exception. */
+ return;
+
+ case AddressLoad:
+ case AddressStore:
+ case InstructionFetch:
+ case DataReference:
+ /* The following is so that the simulator will continue from the
+ exception address on breakpoint operations. */
+ PC = COP0_EPC;
+ sim_engine_halt (SD, CPU, NULL, NULL_CIA,
+ sim_stopped, SIM_SIGBUS);
+ break;
+
+ case ReservedInstruction:
+ case CoProcessorUnusable:
+ PC = COP0_EPC;
+ sim_engine_halt (SD, CPU, NULL, NULL_CIA,
+ sim_stopped, SIM_SIGILL);
+ break;
+
+ case IntegerOverflow:
+ case FPE:
+ PC = COP0_EPC;
+ sim_engine_halt (SD, CPU, NULL, NULL_CIA,
+ sim_stopped, SIM_SIGFPE);
+ break;
+
+ case TLBModification:
+ case TLBLoad:
+ case TLBStore:
+ case BreakPoint:
+ case SystemCall:
+ case Trap:
+ sim_engine_restart (SD, CPU, NULL, PC);
+ break;
+
+ case Watch:
+ PC = COP0_EPC;
+ sim_engine_halt (SD, CPU, NULL, NULL_CIA,
+ sim_stopped, SIM_SIGTRAP);
+ break;
+
+ default : /* Unknown internal exception */
+ PC = COP0_EPC;
+ sim_engine_halt (SD, CPU, NULL, NULL_CIA,
+ sim_stopped, SIM_SIGABRT);
+ break;
+
+ }
+ }
+ return;
+}
+
+#else /* TARGET_SKY */
+/* end-sanitize-sky */
+
/* Description from page A-26 of the "MIPS IV Instruction Set" manual (revision 3.1) */
/* Signal an exception condition. This will result in an exception
that aborts the instruction. The instruction operation pseudocode
return;
}
+/* start-sanitize-sky */
+#endif /* ! TARGET_SKY */
+/* end-sanitize-sky */
+
+
#if defined(WARN_RESULT)
/* Description from page A-26 of the "MIPS IV Instruction Set" manual (revision 3.1) */
/* This function indicates that the result of the operation is
/* start-sanitize-sky */
-#ifdef TARGET_SKY
+#if defined(TARGET_SKY) && !defined(TARGET_SKY_B)
void
cop_lq (SIM_DESC sd,
sim_cpu *cpu,
/* start-sanitize-sky */
-#ifdef TARGET_SKY
+#if defined(TARGET_SKY) && !defined(TARGET_SKY_B)
unsigned128
cop_sq (SIM_DESC sd,
sim_cpu *cpu,
int handle = 0;
/* start-sanitize-sky */
-#ifdef TARGET_SKY
+#if defined(TARGET_SKY) && !defined(TARGET_SKY_B)
/* On the R5900, this refers to a "VU" vector co-processor. */
int i_25_21 = (instruction >> 21) & 0x1f;
/* NOTREACHED */
}
-#undef MY_INDEX
-#undef MY_PREFIX
-#undef MY_NAME
-
#endif /* TARGET_SKY */
/* end-sanitize-sky */
typedef address_word sim_cia;
-#if (WITH_IGEN)
-/* Get the number of instructions. FIXME: must be a more elegant way
- of doing this. */
-#include "itable.h"
-#define MAX_INSNS (nr_itable_entries)
-#define INSN_NAME(cpu,i) itable[(i)].name
-#endif
-
#include "sim-base.h"
R5900_FPMIN = LSMASK32 (31, 0),
};
+typedef struct _r4000_tlb_entry {
+ unsigned32 mask;
+ unsigned32 hi;
+ unsigned32 lo0;
+ unsigned32 lo1;
+} r4000_tlb_entry_t;
+
+#define TLB_MASK_MASK_MASK 0x01ffe000
+#define TLB_HI_VPN2_MASK 0xffffe000
+#define TLB_HI_G_MASK 0x00001000
+#define TLB_HI_ASID_MASK 0x000000ff
+
+#define TLB_LO_S_MASK 0x80000000
+#define TLB_LO_PFN_MASK 0x03ffffc0
+#define TLB_LO_C_MASK 0x00000038
+#define TLB_LO_D_MASK 0x00000004
+#define TLB_LO_V_MASK 0x00000002
+#define TLB_SIZE 48
typedef struct _sim_r5900_cpu {
same register. */
signed_word gpr1[32];
#define GPR1 ((CPU)->r5900.gpr1)
+#define GPR1_SET(N,VAL) (GPR1[(N]) = (VAL))
signed_word lo1;
signed_word hi1;
#define LO1 ((CPU)->r5900.lo1)
hilo_history lo1_history;
#define LO1HISTORY (&(CPU)->r5900.lo1_history)
+ r4000_tlb_entry_t tlb[TLB_SIZE];
+#define TLB ((CPU)->r5900.tlb)
+
} sim_r5900_cpu;
#define BYTES_IN_MMI_REGS (sizeof(signed_word) + sizeof(signed_word))
#ifndef TM_MIPS_H
#define LAST_EMBED_REGNUM (89)
#define NUM_REGS (LAST_EMBED_REGNUM + 1)
+
/* start-sanitize-r5900 */
+#define FIRST_COP0_REG 128
+#define NUM_COP0_REGS 22
#undef NUM_REGS
-#define NUM_REGS (128)
+#define NUM_REGS (150)
/* end-sanitize-r5900 */
+
#endif
/* start-sanitize-sky */
#define NUM_VIF_REGS 26
-#define NUM_CORE_REGS 128
+#define NUM_CORE_REGS 150
#undef NUM_REGS
#define NUM_REGS (NUM_CORE_REGS + 2*(NUM_VU_REGS) + 2*(NUM_VIF_REGS))
#define COP0_BP ((CPU)->cop0_bp)
#define NR_COP0_P 64
unsigned_word cop0_p[NR_COP0_P];
+
#define COP0_P ((CPU)->cop0_p)
+#define COP0_INDEX ((unsigned32)(COP0_GPR[0]))
+#define COP0_RANDOM ((unsigned32)(COP0_GPR[1]))
+#define COP0_ENTRYLO0 ((unsigned32)(COP0_GPR[2]))
+#define COP0_ENTRYLO1 ((unsigned32)(COP0_GPR[3]))
+#define COP0_CONTEXT ((unsigned32)(COP0_GPR[4]))
+#define COP0_PAGEMASK ((unsigned32)(COP0_GPR[5]))
+#define COP0_WIRED ((unsigned32)(COP0_GPR[6]))
+#define COP0_BADVADDR ((unsigned32)(COP0_GPR[8]))
+#define COP0_COUNT ((unsigned32)(COP0_GPR[9]))
+#define COP0_ENTRYHI ((unsigned32)(COP0_GPR[10]))
+#define COP0_COMPARE ((unsigned32)(COP0_GPR[11]))
+#define COP0_EPC ((unsigned32)(EPC)) /* 14 */
+#define COP0_PRID ((unsigned32)(COP0_GPR[15]))
+#define COP0_CONFIG ((unsigned32)(C0_CONFIG)) /* 16 */
+#define COP0_TAGLO ((unsigned32)(COP0_GPR[28]))
+#define COP0_TAGHI ((unsigned32)(COP0_GPR[29]))
+#define COP0_ERROREPC ((unsigned32)(COP0_GPR[30]))
+
+#define COP0_CONTEXT_BADVPN2_MASK 0x007ffff0
+
+#define COP0_CONTEXT_set_BADVPN2(x) \
+ (COP0_CONTEXT = ((COP0_CONTEXT & 0xff100000) | ((x << 4) & 0x007ffff0)))
/* end-sanitize-r5900 */
-
/* Keep the current format state for each register: */
FP_formats fpr_state[32];
#define FPR_STATE ((CPU)->fpr_state)
/* end-sanitize-branchbug4011 */
/* start-sanitize-r5900 */
sim_r5900_cpu r5900;
-
/* end-sanitize-r5900 */
- /* start-sanitize-cygnus */
+ /* start-sanitize-cygnus */
/* The MDMX ISA has a very very large accumulator */
unsigned8 acc[3 * 8];
/* end-sanitize-cygnus */
- /* start-sanitize-sky */
+ /* start-sanitize-sky */
#ifdef TARGET_SKY
/* Device on which instruction issue last occured. */
char cur_device;
#endif
/* end-sanitize-sky */
+
sim_cpu_base base;
};
/* TODO : these should be the bitmasks for these bits within the
status register. At the moment the following are VR4300
bit-positions: */
-#define status_KSU_mask (0x3) /* mask for KSU bits */
+#define status_KSU_mask (0x18) /* mask for KSU bits */
#define status_KSU_shift (3) /* shift for field */
#define ksu_kernel (0x0)
#define ksu_supervisor (0x1)
#define ksu_user (0x2)
#define ksu_unknown (0x3)
+#define SR_KSU ((SR & status_KSU_mask) >> status_KSU_shift)
+
#define status_IE (1 << 0) /* Interrupt enable */
#define status_EIE (1 << 16) /* Enable Interrupt Enable */
#define status_EXL (1 << 1) /* Exception level */
#define status_BEV (1 << 22) /* Location of general exception vectors */
#define status_TS (1 << 21) /* TLB shutdown has occurred */
#define status_ERL (1 << 2) /* Error level */
+#define status_IM7 (1 << 15) /* Timer Interrupt Mask */
#define status_RP (1 << 27) /* Reduced Power mode */
/* start-sanitize-r5900 */
#define status_CU0 (1 << 28) /* COP0 usable */
#define status_NMI (1 << 20) /* NMI */
#define status_NMI (1 << 20) /* NMI */
-#define cause_EXC_mask (0x1f) /* Exception code */
+#define cause_BD ((unsigned)1 << 31) /* L1 Exception in branch delay slot */
+#define cause_BD2 (1 << 30) /* L2 Exception in branch delay slot */
+#define cause_CE_mask 0x30000000 /* Coprocessor exception */
+#define cause_CE_shift 28
+#define cause_EXC2_mask 0x00070000
+#define cause_EXC2_shift 16
+#define cause_IP7 (1 << 15) /* Interrupt pending */
+#define cause_SIOP (1 << 12) /* SIO pending */
+#define cause_IP3 (1 << 11) /* Int 0 pending */
+#define cause_IP2 (1 << 10) /* Int 1 pending */
+
+/* start-sanitize-sky */
+#ifdef TARGET_SKY
+#define cause_EXC_mask (0x7c) /* Exception code */
+#else
+/* end-sanitize-sky */
+#define cause_EXC_mask (0x1c) /* Exception code */
+/* start-sanitize-sky */
+#endif
+/* end-sanitize-sky */
#define cause_EXC_shift (2)
+
#define cause_SW0 (1 << 8) /* Software interrupt 0 */
#define cause_SW1 (1 << 9) /* Software interrupt 1 */
#define cause_IP_mask (0x3f) /* Interrupt pending field */
#define cause_IP_shift (10)
-#define cause_CE_mask (0x3) /* Coprocessor error */
-#define cause_CE_shift (28)
-#define cause_BD ((unsigned)1 << 31) /* Exception in branch delay slot */
+#define cause_set_EXC(x) CAUSE = (CAUSE & ~cause_EXC_mask) | ((x << cause_EXC_shift) & cause_EXC_mask)
+#define cause_set_EXC2(x) CAUSE = (CAUSE & ~cause_EXC2_mask) | ((x << cause_EXC2_shift) & cause_EXC2_mask)
/* NOTE: We keep the following status flags as bit values (1 for true,
#ifdef SUBTARGET_R3900
#define UserMode ((SR & status_KUc) ? 1 : 0)
#else
-#define UserMode ((((SR & status_KSU_mask) >> status_KSU_shift) == ksu_user) ? 1 : 0)
+#define UserMode ((((SR & status_KSU_mask) >> status_KSU_shift) == ksu_user) ? 1 : 0)
#endif /* SUBTARGET_R3900 */
/* BigEndianMem */
/* NOTE: These numbers depend on the processor architecture being
simulated: */
-#define Interrupt (0)
-#define TLBModification (1)
-#define TLBLoad (2)
-#define TLBStore (3)
-#define AddressLoad (4)
-#define AddressStore (5)
-#define InstructionFetch (6)
-#define DataReference (7)
-#define SystemCall (8)
-#define BreakPoint (9)
-#define ReservedInstruction (10)
-#define CoProcessorUnusable (11)
-#define IntegerOverflow (12) /* Arithmetic overflow (IDT monitor raises SIGFPE) */
-#define Trap (13)
-#define FPE (15)
-#define DebugBreakPoint (16)
-#define Watch (23)
-#define NMIReset (31)
+enum ExceptionCause {
+ Interrupt = 0,
+ TLBModification = 1,
+ TLBLoad = 2,
+ TLBStore = 3,
+ AddressLoad = 4,
+ AddressStore = 5,
+ InstructionFetch = 6,
+ DataReference = 7,
+ SystemCall = 8,
+ BreakPoint = 9,
+ ReservedInstruction = 10,
+ CoProcessorUnusable = 11,
+ IntegerOverflow = 12, /* Arithmetic overflow (IDT monitor raises SIGFPE) */
+ Trap = 13,
+ FPE = 15,
+ DebugBreakPoint = 16,
+ Watch = 23,
+ NMIReset = 31,
/* The following exception code is actually private to the simulator
world. It is *NOT* a processor feature, and is used to signal
run-time errors in the simulator. */
-#define SimulatorFault (0xFFFFFFFF)
+ SimulatorFault = 0xFFFFFFFF
+};
+
+#define TLB_REFILL (0)
+#define TLB_INVALID (1)
+
+/* start-sanitize-r5900 */
+/* For the 5900, we have level 1 and level 2 exceptions. The level 2 exceptions
+ are ColdReset, NMI, Counter, and Debug/SIO. Of these, we support only
+ the NMIReset exception. */
+
+#define is5900Level2Exception(x) (x == NMIReset)
+/* end-sanitize-r5900 */
/* The following break instructions are reserved for use by the
simulator. The first is used to halt the simulation. The second
is used by gdb for break-points. NOTE: Care must be taken, since
this value may be used in later revisions of the MIPS ISA. */
-#define HALT_INSTRUCTION_MASK (0x03FFFFC0)
+#define HALT_INSTRUCTION_MASK (0x03FFFFC0)
-#define HALT_INSTRUCTION (0x03ff000d)
-#define HALT_INSTRUCTION2 (0x0000ffcd)
+#define HALT_INSTRUCTION (0x03ff000d)
+#define HALT_INSTRUCTION2 (0x0000ffcd)
/* start-sanitize-sky */
-#define HALT_INSTRUCTION_PASS (0x03fffc0d)
-#define HALT_INSTRUCTION_FAIL (0x03ffffcd)
+#define HALT_INSTRUCTION_PASS (0x03fffc0d) /* break 0xffff0 */
+#define HALT_INSTRUCTION_FAIL (0x03ffffcd) /* break 0xfffff */
/* end-sanitize-sky */
#define BREAKPOINT_INSTRUCTION (0x0005000d)
#define BREAKPOINT_INSTRUCTION2 (0x0000014d)
+/* start-sanitize-sky */
+#define LOAD_INSTRUCTION (0x03fffc4d) /* break 0xffff1 */
+#define PRINTF_INSTRUCTION (0x03fffc8d) /* break 0xffff2 */
+/* end-sanitize-sky */
+
void interrupt_event (SIM_DESC sd, void *data);
void signal_exception (SIM_DESC sd, sim_cpu *cpu, address_word cia, int exception, ...);
#define SignalException(exc,instruction) signal_exception (SD, CPU, cia, (exc), (instruction))
-#define SignalExceptionInterrupt() signal_exception (SD, CPU, cia, Interrupt)
+#define SignalExceptionInterrupt(level) signal_exception (SD, CPU, cia, Interrupt, level)
#define SignalExceptionInstructionFetch() signal_exception (SD, CPU, cia, InstructionFetch)
#define SignalExceptionAddressStore() signal_exception (SD, CPU, cia, AddressStore)
#define SignalExceptionAddressLoad() signal_exception (SD, CPU, cia, AddressLoad)
#define SignalExceptionIntegerOverflow() signal_exception (SD, CPU, cia, IntegerOverflow)
#define SignalExceptionCoProcessorUnusable() signal_exception (SD, CPU, cia, CoProcessorUnusable)
#define SignalExceptionNMIReset() signal_exception (SD, CPU, cia, NMIReset)
+#define SignalExceptionTLBRefillStore() signal_exception (SD, CPU, cia, TLBStore, TLB_REFILL)
+#define SignalExceptionTLBRefillLoad() signal_exception (SD, CPU, cia, TLBLoad, TLB_REFILL)
+#define SignalExceptionTLBInvalidStore() signal_exception (SD, CPU, cia, TLBStore, TLB_INVALID)
+#define SignalExceptionTLBInvalidLoad() signal_exception (SD, CPU, cia, TLBLoad, TLB_INVALID)
+#define SignalExceptionTLBModification() signal_exception (SD, CPU, cia, TLBModification)
/* Co-processor accesses */
/* start-sanitize-sky */
#ifdef TARGET_SKY
+
#ifdef SIM_ENGINE_HALT_HOOK
#undef SIM_ENGINE_HALT_HOOK
#endif
#define MODULE_LIST sky_sim_module_install,
+void sim_monitor (SIM_DESC sd, sim_cpu *cpu, address_word cia, unsigned int arg);
+
#ifndef TM_TXVU_H /* In case GDB hasn't been configured yet */
enum txvu_cpu_context
{
TXVU_CPU_MASTER = 0, /* R5900 core */
TXVU_CPU_VU0 = 1, /* Vector units */
TXVU_CPU_VU1 = 2,
- TXVU_CPU_VIF0 = 3, /* FIFO's */
+ TXVU_CPU_VIF0 = 3, /* Vector interface units */
TXVU_CPU_VIF1 = 4,
TXVU_CPU_LAST /* Count of context types */
};
+++ /dev/null
-/* Copyright (C) 1998, Cygnus Solutions */
-
-
-#include "config.h"
-
-#include <stdlib.h>
-#include "sim-main.h"
-#include "sim-bits.h"
-#include "sim-assert.h"
-#include "sky-pke.h"
-#include "sky-dma.h"
-#include "sky-vu.h"
-#include "sky-gpuif.h"
-#include "sky-gdb.h"
-#include "sky-device.h"
-
-
-#ifdef HAVE_STRING_H
-#include <string.h>
-#else
-#ifdef HAVE_STRINGS_H
-#include <strings.h>
-#endif
-#endif
-
-
-/* Internal function declarations */
-
-static int pke_io_read_buffer(device*, void*, int, address_word,
- unsigned, sim_cpu*, sim_cia);
-static int pke_io_write_buffer(device*, const void*, int, address_word,
- unsigned, sim_cpu*, sim_cia);
-static void pke_reset(struct pke_device*);
-static void pke_issue(SIM_DESC, struct pke_device*);
-static void pke_pc_advance(struct pke_device*, int num_words);
-static struct fifo_quadword* pke_pcrel_fifo(struct pke_device*, int operand_num,
- unsigned_4** operand);
-static unsigned_4* pke_pcrel_operand(struct pke_device*, int operand_num);
-static unsigned_4 pke_pcrel_operand_bits(struct pke_device*, int bit_offset,
- int bit_width, unsigned_4* sourceaddr);
-static void pke_attach(SIM_DESC sd, struct pke_device* me);
-enum pke_check_target { chk_vu, chk_path1, chk_path2, chk_path3 };
-static int pke_check_stall(struct pke_device* me, enum pke_check_target what);
-static void pke_flip_dbf(struct pke_device* me);
-static void pke_begin_interrupt_stall(struct pke_device* me);
-/* PKEcode handlers */
-static void pke_code_nop(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_stcycl(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_offset(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_base(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_itop(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_stmod(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_mskpath3(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_pkemark(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_flushe(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_flush(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_flusha(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_pkemscal(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_pkemscnt(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_pkemscalf(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_stmask(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_strow(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_stcol(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_mpg(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_direct(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_directhl(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_unpack(struct pke_device* me, unsigned_4 pkecode);
-static void pke_code_error(struct pke_device* me, unsigned_4 pkecode);
-unsigned_4 pke_fifo_flush(struct pke_fifo*);
-void pke_fifo_reset(struct pke_fifo*);
-struct fifo_quadword* pke_fifo_fit(struct pke_fifo*);
-struct fifo_quadword* pke_fifo_access(struct pke_fifo*, unsigned_4 qwnum);
-void pke_fifo_old(struct pke_fifo*, unsigned_4 qwnum);
-
-/* Default --log-file names */
-const char *pke0_default_trace = "vif0.s";
-const char *pke1_default_trace = "vif1.s";
-
-
-/* Static data */
-
-struct pke_device pke0_device =
-{
- { "vif0", &pke_io_read_buffer, &pke_io_write_buffer }, /* device */
- 0, 0, /* ID, flags */
- {}, /* regs */
- {}, 0, /* FIFO write buffer */
- { NULL, 0, 0, 0 }, /* FIFO */
- NULL, NULL, /* FIFO trace file descriptor and name */
- -1, -1, 0, 0, 0, /* invalid FIFO cache */
- 0, 0, /* pc */
- NULL, NULL /* disassembly trace file descriptor and name */
-};
-
-
-struct pke_device pke1_device =
-{
- { "vif1", &pke_io_read_buffer, &pke_io_write_buffer }, /* device */
- 1, 0, /* ID, flags */
- {}, /* regs */
- {}, 0, /* FIFO write buffer */
- { NULL, 0, 0, 0 }, /* FIFO */
- NULL, NULL, /* FIFO trace file descriptor and name */
- -1, -1, 0, 0, 0, /* invalid FIFO cache */
- 0, 0, /* pc */
- NULL, NULL /* disassembly trace file descriptor and name */
-};
-
-
-
-/* External functions */
-
-
-/* Attach PKE addresses to main memory */
-
-void
-pke0_attach(SIM_DESC sd)
-{
- pke_attach(sd, & pke0_device);
- pke_reset(& pke0_device);
-}
-
-void
-pke1_attach(SIM_DESC sd)
-{
- pke_attach(sd, & pke1_device);
- pke_reset(& pke1_device);
-}
-
-
-
-/* Issue a PKE instruction if possible */
-
-void
-pke0_issue(SIM_DESC sd)
-{
- pke_issue(sd, & pke0_device);
-}
-
-void
-pke1_issue(SIM_DESC sd)
-{
- pke_issue(sd, & pke1_device);
-}
-
-
-
-/* Internal functions */
-
-
-/* Attach PKE memory regions to simulator */
-
-void
-pke_attach(SIM_DESC sd, struct pke_device* me)
-{
- /* register file */
- sim_core_attach (sd, NULL, 0, access_read_write, 0,
- (me->pke_number == 0) ? PKE0_REGISTER_WINDOW_START : PKE1_REGISTER_WINDOW_START,
- PKE_REGISTER_WINDOW_SIZE /*nr_bytes*/,
- 0 /*modulo*/,
- (device*) me,
- NULL /*buffer*/);
-
- /* FIFO port */
- sim_core_attach (sd, NULL, 0, access_read_write, 0,
- (me->pke_number == 0) ? PKE0_FIFO_ADDR : PKE1_FIFO_ADDR,
- sizeof(quadword) /*nr_bytes*/,
- 0 /*modulo*/,
- (device*) me,
- NULL /*buffer*/);
-
- /* VU MEM0 tracking table */
- sim_core_attach (sd, NULL, 0, access_read_write, 0,
- ((me->pke_number == 0) ? VU0_MEM0_SRCADDR_START : VU1_MEM0_SRCADDR_START),
- ((me->pke_number == 0) ? VU0_MEM0_SIZE : VU1_MEM0_SIZE) / 2,
- 0 /*modulo*/,
- NULL,
- NULL /*buffer*/);
-
- /* VU MEM1 tracking table */
- sim_core_attach (sd, NULL, 0, access_read_write, 0,
- ((me->pke_number == 0) ? VU0_MEM1_SRCADDR_START : VU1_MEM1_SRCADDR_START),
- ((me->pke_number == 0) ? VU0_MEM1_SIZE : VU1_MEM1_SIZE) / 4,
- 0 /*modulo*/,
- NULL,
- NULL /*buffer*/);
-}
-
-
-/* Read PKE Pseudo-PC index into buf in target order */
-int
-read_pke_pcx (struct pke_device *me, void *buf)
-{
- *((int *) buf) = H2T_4( (me->fifo_pc << 2) | me->qw_pc );
- return 4;
-}
-
-
-/* Read PKE Pseudo-PC source address into buf in target order */
-int
-read_pke_pc (struct pke_device *me, void *buf)
-{
- struct fifo_quadword* fqw = pke_fifo_access(& me->fifo, me->fifo_pc);
- unsigned_4 addr;
-
- if (fqw == NULL)
- *((int *) buf) = 0;
- else
- {
- addr = (fqw->source_address & ~15) | (me->qw_pc << 2);
- *((unsigned_4 *) buf) = H2T_4( addr );
- }
-
- return 4;
-}
-
-
-/* Read PKE reg into buf in target order */
-int
-read_pke_reg (struct pke_device *me, int reg_num, void *buf)
-{
- /* handle reads to individual registers; clear `readable' on error */
- switch (reg_num)
- {
- /* handle common case of register reading, side-effect free */
- /* PKE1-only registers*/
- case PKE_REG_BASE:
- case PKE_REG_OFST:
- case PKE_REG_TOPS:
- case PKE_REG_TOP:
- case PKE_REG_DBF:
- if (me->pke_number == 0)
- {
- *((int *) buf) = 0;
- break;
- }
- /* fall through */
-
- /* PKE0 & PKE1 common registers*/
- case PKE_REG_STAT:
- case PKE_REG_ERR:
- case PKE_REG_MARK:
- case PKE_REG_CYCLE:
- case PKE_REG_MODE:
- case PKE_REG_NUM:
- case PKE_REG_MASK:
- case PKE_REG_CODE:
- case PKE_REG_ITOPS:
- case PKE_REG_ITOP:
- case PKE_REG_R0:
- case PKE_REG_R1:
- case PKE_REG_R2:
- case PKE_REG_R3:
- case PKE_REG_C0:
- case PKE_REG_C1:
- case PKE_REG_C2:
- case PKE_REG_C3:
- *((int *) buf) = H2T_4(me->regs[reg_num][0]);
- break;
-
- /* handle common case of write-only registers */
- case PKE_REG_FBRST:
- *((int *) buf) = 0;
- break;
-
- default:
- ASSERT(0); /* tests above should prevent this possibility */
- }
-
- return 4;
-}
-
-
-/* Handle a PKE read; return no. of bytes read */
-
-int
-pke_io_read_buffer(device *me_,
- void *dest,
- int space,
- address_word addr,
- unsigned nr_bytes,
- sim_cpu *cpu,
- sim_cia cia)
-{
- /* downcast to gather embedding pke_device struct */
- struct pke_device* me = (struct pke_device*) me_;
-
- /* find my address ranges */
- address_word my_reg_start =
- (me->pke_number == 0) ? PKE0_REGISTER_WINDOW_START : PKE1_REGISTER_WINDOW_START;
- address_word my_fifo_addr =
- (me->pke_number == 0) ? PKE0_FIFO_ADDR : PKE1_FIFO_ADDR;
-
- /* enforce that an access does not span more than one quadword */
- address_word low = ADDR_TRUNC_QW(addr);
- address_word high = ADDR_TRUNC_QW(addr + nr_bytes - 1);
- if(low != high)
- return 0;
-
- /* classify address & handle */
- if((addr >= my_reg_start) && (addr < my_reg_start + PKE_REGISTER_WINDOW_SIZE))
- {
- /* register bank */
- int reg_num = ADDR_TRUNC_QW(addr - my_reg_start) >> 4;
- int reg_byte = ADDR_OFFSET_QW(addr); /* find byte-offset inside register bank */
- quadword result;
-
- /* clear result */
- result[0] = result[1] = result[2] = result[3] = 0;
-
- read_pke_reg (me, reg_num, result);
-
- /* perform transfer & return */
- memcpy(dest, ((unsigned_1*) &result) + reg_byte, nr_bytes);
-
- return nr_bytes;
- /* NOTREACHED */
- }
- else if(addr >= my_fifo_addr &&
- addr < my_fifo_addr + sizeof(quadword))
- {
- /* FIFO */
-
- /* FIFO is not readable: return a word of zeroes */
- memset(dest, 0, nr_bytes);
- return nr_bytes;
- }
-
- /* NOTREACHED */
- return 0;
-}
-
-/* Write PKE reg from buf, which is in target order */
-int
-write_pke_reg (struct pke_device *me, int reg_num, const void *buf)
-{
- int writeable = 1;
- /* make words host-endian */
- unsigned_4 input = T2H_4( *((unsigned_4 *) buf) );
-
- /* handle writes to individual registers; clear `writeable' on error */
- switch (reg_num)
- {
- case PKE_REG_FBRST:
- /* Order these tests from least to most overriding, in case
- multiple bits are set. */
- if(BIT_MASK_GET(input, PKE_REG_FBRST_STC_B, PKE_REG_FBRST_STC_E))
- {
- /* clear a bunch of status bits */
- PKE_REG_MASK_SET(me, STAT, PSS, 0);
- PKE_REG_MASK_SET(me, STAT, PFS, 0);
- PKE_REG_MASK_SET(me, STAT, PIS, 0);
- PKE_REG_MASK_SET(me, STAT, INT, 0);
- PKE_REG_MASK_SET(me, STAT, ER0, 0);
- PKE_REG_MASK_SET(me, STAT, ER1, 0);
- me->flags &= ~PKE_FLAG_PENDING_PSS;
- /* will allow resumption of possible stalled instruction */
- }
- if(BIT_MASK_GET(input, PKE_REG_FBRST_STP_B, PKE_REG_FBRST_STP_E))
- {
- me->flags |= PKE_FLAG_PENDING_PSS;
- }
- if(BIT_MASK_GET(input, PKE_REG_FBRST_FBK_B, PKE_REG_FBRST_FBK_E))
- {
- PKE_REG_MASK_SET(me, STAT, PFS, 1);
- }
- if(BIT_MASK_GET(input, PKE_REG_FBRST_RST_B, PKE_REG_FBRST_RST_E))
- {
- pke_reset(me);
- }
- break;
-
- case PKE_REG_ERR:
- /* copy bottom three bits */
- BIT_MASK_SET(me->regs[PKE_REG_ERR][0], 0, 2, BIT_MASK_GET(input, 0, 2));
- break;
-
- case PKE_REG_MARK:
- /* copy bottom sixteen bits */
- PKE_REG_MASK_SET(me, MARK, MARK, BIT_MASK_GET(input, 0, 15));
- /* reset MRK bit in STAT */
- PKE_REG_MASK_SET(me, STAT, MRK, 0);
- break;
-
- /* handle common case of read-only registers */
- /* PKE1-only registers - not really necessary to handle separately */
- case PKE_REG_BASE:
- case PKE_REG_OFST:
- case PKE_REG_TOPS:
- case PKE_REG_TOP:
- case PKE_REG_DBF:
- if(me->pke_number == 0)
- writeable = 0;
- /* fall through */
- /* PKE0 & PKE1 common registers*/
- case PKE_REG_STAT:
- /* ignore FDR bit for PKE1_STAT -- simulator does not implement PKE->RAM transfers */
- case PKE_REG_CYCLE:
- case PKE_REG_MODE:
- case PKE_REG_NUM:
- case PKE_REG_MASK:
- case PKE_REG_CODE:
- case PKE_REG_ITOPS:
- case PKE_REG_ITOP:
- case PKE_REG_R0:
- case PKE_REG_R1:
- case PKE_REG_R2:
- case PKE_REG_R3:
- case PKE_REG_C0:
- case PKE_REG_C1:
- case PKE_REG_C2:
- case PKE_REG_C3:
- writeable = 0;
- break;
-
- default:
- ASSERT(0); /* test above should prevent this possibility */
- }
-
- /* perform return */
- if(! writeable)
- {
- return 0; /* error */
- }
-
- return 4;
-}
-
-
-/* Handle a PKE write; return no. of bytes written */
-
-int
-pke_io_write_buffer(device *me_,
- const void *src,
- int space,
- address_word addr,
- unsigned nr_bytes,
- sim_cpu *cpu,
- sim_cia cia)
-{
- /* downcast to gather embedding pke_device struct */
- struct pke_device* me = (struct pke_device*) me_;
-
- /* find my address ranges */
- address_word my_reg_start =
- (me->pke_number == 0) ? PKE0_REGISTER_WINDOW_START : PKE1_REGISTER_WINDOW_START;
- address_word my_fifo_addr =
- (me->pke_number == 0) ? PKE0_FIFO_ADDR : PKE1_FIFO_ADDR;
-
- /* enforce that an access does not span more than one quadword */
- address_word low = ADDR_TRUNC_QW(addr);
- address_word high = ADDR_TRUNC_QW(addr + nr_bytes - 1);
- if(low != high)
- return 0;
-
- /* classify address & handle */
- if((addr >= my_reg_start) && (addr < my_reg_start + PKE_REGISTER_WINDOW_SIZE))
- {
- /* register bank */
- int reg_num = ADDR_TRUNC_QW(addr - my_reg_start) >> 4;
- int reg_byte = ADDR_OFFSET_QW(addr); /* find byte-offset inside register bank */
- quadword input;
-
- /* clear input */
- input[0] = input[1] = input[2] = input[3] = 0;
-
- /* write user-given bytes into input */
- memcpy(((unsigned_1*) &input) + reg_byte, src, nr_bytes);
-
- write_pke_reg (me, reg_num, input);
- return nr_bytes;
-
- /* NOTREACHED */
- }
- else if(addr >= my_fifo_addr &&
- addr < my_fifo_addr + sizeof(quadword))
- {
- /* FIFO */
- struct fifo_quadword* fqw;
- int fifo_byte = ADDR_OFFSET_QW(addr); /* find byte-offset inside fifo quadword */
- unsigned_4 dma_tag_present = 0;
- int i;
-
- /* collect potentially-partial quadword in write buffer; LE byte order */
- memcpy(((unsigned_1*)& me->fifo_qw_in_progress) + fifo_byte, src, nr_bytes);
- /* mark bytes written */
- for(i = fifo_byte; i < fifo_byte + nr_bytes; i++)
- BIT_MASK_SET(me->fifo_qw_done, i, i, 1);
-
- /* return if quadword not quite written yet */
- if(BIT_MASK_GET(me->fifo_qw_done, 0, sizeof(quadword)-1) !=
- BIT_MASK_BTW(0, sizeof(quadword)-1))
- return nr_bytes;
-
- /* all done - process quadword after clearing flag */
- BIT_MASK_SET(me->fifo_qw_done, 0, sizeof(quadword)-1, 0);
-
- /* allocate required address in FIFO */
- fqw = pke_fifo_fit(& me->fifo);
- ASSERT(fqw != NULL);
-
- /* fill in unclassified FIFO quadword data in host byte order */
- fqw->word_class[0] = fqw->word_class[1] =
- fqw->word_class[2] = fqw->word_class[3] = wc_unknown;
- fqw->data[0] = T2H_4(me->fifo_qw_in_progress[0]);
- fqw->data[1] = T2H_4(me->fifo_qw_in_progress[1]);
- fqw->data[2] = T2H_4(me->fifo_qw_in_progress[2]);
- fqw->data[3] = T2H_4(me->fifo_qw_in_progress[3]);
-
- /* read DMAC-supplied indicators */
- ASSERT(sizeof(unsigned_4) == 4);
- PKE_MEM_READ(me, (me->pke_number == 0 ? DMA_D0_MADR : DMA_D1_MADR),
- & fqw->source_address, /* converted to host-endian */
- 4);
- PKE_MEM_READ(me, (me->pke_number == 0 ? DMA_D0_PKTFLAG : DMA_D1_PKTFLAG),
- & dma_tag_present,
- 4);
-
- if(dma_tag_present)
- {
- /* lower two words are DMA tags */
- fqw->word_class[0] = fqw->word_class[1] = wc_dma;
- }
-
- /* set FQC to "1" as FIFO is now not empty */
- PKE_REG_MASK_SET(me, STAT, FQC, 1);
-
- /* okay */
- return nr_bytes;
- }
-
- /* NOTREACHED */
- return 0;
-}
-
-
-
-/* Reset the simulated PKE hardware state. Preserve other internal
- state. */
-void
-pke_reset(struct pke_device* me)
-{
- /* advance PC over last quadword in FIFO; keep previous FIFO history */
- me->fifo_pc = pke_fifo_flush(& me->fifo);
- me->qw_pc = 0;
- /* clear registers, flag, other state */
- memset(me->regs, 0, sizeof(me->regs));
- me->fifo_qw_done = 0;
- /* Command options will remain alive over the reset. */
- me->flags &= PKE_FLAG_TRACE_ON;
-
- /* NOTE: Since disassembly / trace logs remain open across ordinary
- simulated hardware resets, there may be a problem of producing a
- trace file that has only partial results from the prior
- operation. For the current PKE model, however, this cannot
- happen as stalls & interrupts only occur *between* simulated
- PKEcode executions. This means that our trace files ought remain
- syntactically valid, despite resets. */
-
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n;%s RESET\n",
- me->dev.name);
- }
- }
-
-
-
-/* Issue & swallow next PKE opcode if possible/available */
-
-void
-pke_issue(SIM_DESC sd, struct pke_device* me)
-{
- struct fifo_quadword* fqw;
- unsigned_4 fw;
- unsigned_4 cmd, intr;
-
- /* 1 -- fetch PKE instruction */
-
- /* confirm availability of new quadword of PKE instructions */
- fqw = pke_fifo_access(& me->fifo, me->fifo_pc);
- if(fqw == NULL)
- return;
-
- /* skip over DMA tag, if present */
- pke_pc_advance(me, 0);
- /* note: this can only change qw_pc from 0 to 2 and will not
- invalidate fqw */
-
- /* "fetch" instruction quadword and word */
- fw = fqw->data[me->qw_pc];
-
- /* store word in PKECODE register */
- me->regs[PKE_REG_CODE][0] = fw;
-
- /* 2 -- test go / no-go for PKE execution */
-
- /* switch on STAT:PSS if PSS-pending and in idle state */
- if((PKE_REG_MASK_GET(me, STAT, PPS) == PKE_REG_STAT_PPS_IDLE) &&
- (me->flags & PKE_FLAG_PENDING_PSS) != 0)
- {
- me->flags &= ~PKE_FLAG_PENDING_PSS;
- PKE_REG_MASK_SET(me, STAT, PSS, 1);
- }
-
- /* check for stall/halt control bits */
- if(PKE_REG_MASK_GET(me, STAT, PFS) ||
- PKE_REG_MASK_GET(me, STAT, PSS) || /* note special treatment below */
- /* PEW bit not a reason to keep stalling - it's just an indication, re-computed below */
- /* PGW bit not a reason to keep stalling - it's just an indication, re-computed below */
- /* ER0/ER1 not a reason to keep stalling - it's just an indication */
- PKE_REG_MASK_GET(me, STAT, PIS))
- {
- /* (still) stalled */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_STALL);
- /* try again next cycle */
- return;
- }
-
-
- /* 3 -- decode PKE instruction */
-
- /* decoding */
- if(PKE_REG_MASK_GET(me, STAT, PPS) == PKE_REG_STAT_PPS_IDLE)
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_DECODE);
-
- /* Extract relevant bits from PKEcode */
- intr = BIT_MASK_GET(fw, PKE_OPCODE_I_B, PKE_OPCODE_I_E);
- cmd = BIT_MASK_GET(fw, PKE_OPCODE_CMD_B, PKE_OPCODE_CMD_E);
-
- /* handle interrupts */
- if(intr)
- {
- /* check to see if the interrupt bit is being used for a breakpoint */
- if (is_vif_breakpoint ((fqw->source_address & ~15) | (me->qw_pc << 2)))
- {
- sim_cpu *cpu = STATE_CPU (sd, 0);
- unsigned_4 pc_addr = (fqw->source_address & ~15) | (me->qw_pc << 2);
-
- sim_engine_halt (sd, cpu, NULL, pc_addr, sim_stopped, SIM_SIGTRAP);
- }
-
- /* are we resuming an interrupt-stalled instruction? */
- if(me->flags & PKE_FLAG_INT_NOLOOP)
- {
- /* clear loop-prevention flag */
- me->flags &= ~PKE_FLAG_INT_NOLOOP;
-
- /* fall through to decode & execute */
- /* The pke_code_* functions should not check the MSB in the
- pkecode. */
- }
- else /* new interrupt-flagged instruction */
- {
- /* set INT flag in STAT register */
- PKE_REG_MASK_SET(me, STAT, INT, 1);
- /* set loop-prevention flag */
- me->flags |= PKE_FLAG_INT_NOLOOP;
-
- /* set PIS if stall not masked */
- if(!PKE_REG_MASK_GET(me, ERR, MII))
- pke_begin_interrupt_stall(me);
-
- /* suspend this instruction unless it's PKEMARK */
- if(!IS_PKE_CMD(cmd, PKEMARK))
- {
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_STALL);
- return;
- }
- else
- {
- ; /* fall through to decode & execute */
- }
- }
- }
-
- /* open trace file if necessary */
- if((me->flags & PKE_FLAG_TRACE_ON) &&
- (me->trace_file == NULL))
- {
- /* use default names */
- if(me->trace_file_name == NULL)
- {
- if(me->pke_number == 0)
- me->trace_file_name = (char *) pke0_default_trace;
- else
- me->trace_file_name = (char *) pke1_default_trace;
- }
-
- sky_open_file(& (me->trace_file),
- me->trace_file_name,
- (char *) NULL, _IOFBF );
-
- /* print disassembly header */
- fprintf(me->trace_file,
- "\t.global %s_disassembly_tag\n"
- "%s_disassembly_tag:\n",
- me->dev.name, me->dev.name);
- }
-
- /* decode & execute */
- /* order tests in decreasing order of frequency */
- if(IS_PKE_CMD(cmd, PKENOP))
- pke_code_nop(me, fw);
- else if(IS_PKE_CMD(cmd, PKEMSCAL))
- pke_code_pkemscal(me, fw);
- else if(IS_PKE_CMD(cmd, PKEMSCNT))
- pke_code_pkemscnt(me, fw);
- else if(me->pke_number == 1 && IS_PKE_CMD(cmd, PKEMSCALF))
- pke_code_pkemscalf(me, fw);
- else if(IS_PKE_CMD(cmd, UNPACK))
- pke_code_unpack(me, fw);
- else if(IS_PKE_CMD(cmd, STCYCL))
- pke_code_stcycl(me, fw);
- else if(IS_PKE_CMD(cmd, FLUSHE))
- pke_code_flushe(me, fw);
- else if(me->pke_number == 1 && IS_PKE_CMD(cmd, FLUSH))
- pke_code_flush(me, fw);
- else if(me->pke_number == 1 && IS_PKE_CMD(cmd, FLUSHA))
- pke_code_flusha(me, fw);
- else if(IS_PKE_CMD(cmd, DIRECT))
- pke_code_direct(me, fw);
- else if(IS_PKE_CMD(cmd, DIRECTHL))
- pke_code_directhl(me, fw);
- else if(me->pke_number == 1 && IS_PKE_CMD(cmd, OFFSET))
- pke_code_offset(me, fw);
- else if(me->pke_number == 1 && IS_PKE_CMD(cmd, BASE))
- pke_code_base(me, fw);
- else if(IS_PKE_CMD(cmd, ITOP))
- pke_code_itop(me, fw);
- else if(IS_PKE_CMD(cmd, STMOD))
- pke_code_stmod(me, fw);
- else if(IS_PKE_CMD(cmd, PKEMARK))
- pke_code_pkemark(me, fw);
- else if(IS_PKE_CMD(cmd, STMASK))
- pke_code_stmask(me, fw);
- else if(IS_PKE_CMD(cmd, STROW))
- pke_code_strow(me, fw);
- else if(IS_PKE_CMD(cmd, STCOL))
- pke_code_stcol(me, fw);
- else if(IS_PKE_CMD(cmd, MPG))
- pke_code_mpg(me, fw);
- else if(me->pke_number == 1 && IS_PKE_CMD(cmd, MSKPATH3))
- pke_code_mskpath3(me, fw);
- /* ... no other commands ... */
- else
- pke_code_error(me, fw);
-}
-
-
-
-/* Clear out contents of FIFO; act as if it was empty. Return PC
- pointing to one-past-last word. */
-
-unsigned_4
-pke_fifo_flush(struct pke_fifo* fifo)
-{
- /* don't modify any state! */
- return fifo->origin + fifo->next;
-}
-
-
-
-/* Clear out contents of FIFO; make it really empty. */
-
-void
-pke_fifo_reset(struct pke_fifo* fifo)
-{
- int i;
-
- /* clear fifo quadwords */
- for(i=0; i<fifo->next; i++)
- {
- zfree(fifo->quadwords[i]);
- fifo->quadwords[i] = NULL;
- }
-
- /* reset pointers */
- fifo->origin = 0;
- fifo->next = 0;
-}
-
-
-
-/* Make space for the next quadword in the FIFO. Allocate/enlarge
- FIFO pointer block if necessary. Return a pointer to it. */
-
-struct fifo_quadword*
-pke_fifo_fit(struct pke_fifo* fifo)
-{
- struct fifo_quadword* fqw;
-
- /* out of space on quadword pointer array? */
- if(fifo->next == fifo->length) /* also triggered before fifo->quadwords allocated */
- {
- struct fifo_quadword** new_qw;
- unsigned_4 new_length = fifo->length + PKE_FIFO_GROW_SIZE;
-
- /* allocate new pointer block */
- new_qw = zalloc(new_length * sizeof(struct fifo_quadword*));
- ASSERT(new_qw != NULL);
-
- /* copy over old contents, if any */
- if(fifo->quadwords != NULL)
- {
- /* copy over old pointers to beginning of new block */
- memcpy(new_qw, fifo->quadwords,
- fifo->length * sizeof(struct fifo_quadword*));
-
- /* free old block */
- zfree(fifo->quadwords);
- }
-
- /* replace pointers & counts */
- fifo->quadwords = new_qw;
- fifo->length = new_length;
- }
-
- /* sanity check */
- ASSERT(fifo->quadwords != NULL);
-
- /* allocate new quadword from heap */
- fqw = zalloc(sizeof(struct fifo_quadword));
- ASSERT(fqw != NULL);
-
- /* push quadword onto fifo */
- fifo->quadwords[fifo->next] = fqw;
- fifo->next++;
- return fqw;
-}
-
-
-
-/* Return a pointer to the FIFO quadword with given absolute index, or
- NULL if it is out of range */
-
-struct fifo_quadword*
-pke_fifo_access(struct pke_fifo* fifo, unsigned_4 qwnum)
-{
- struct fifo_quadword* fqw;
-
- if((qwnum < fifo->origin) || /* before history */
- (qwnum >= fifo->origin + fifo->next)) /* after last available quadword */
- fqw = NULL;
- else
- {
- ASSERT(fifo->quadwords != NULL); /* must be allocated already */
- fqw = fifo->quadwords[qwnum - fifo->origin]; /* pull out pointer from array */
- ASSERT(fqw != NULL); /* must be allocated already */
- }
-
- return fqw;
-}
-
-
-/* Authorize release of any FIFO entries older than given absolute quadword. */
-void
-pke_fifo_old(struct pke_fifo* fifo, unsigned_4 qwnum)
-{
- /* do we have any too-old FIFO elements? */
- if(fifo->origin + PKE_FIFO_ARCHEOLOGY < qwnum)
- {
- /* count quadwords to forget */
- int horizon = qwnum - (fifo->origin + PKE_FIFO_ARCHEOLOGY);
- int i;
-
- /* free quadwords at indices below horizon */
- for(i=0; i < horizon; i++)
- zfree(fifo->quadwords[i]);
-
- /* move surviving quadword pointers down to beginning of array */
- for(i=horizon; i < fifo->next; i++)
- fifo->quadwords[i-horizon] = fifo->quadwords[i];
-
- /* clear duplicate pointers */
- for(i=fifo->next - horizon; i < fifo->next; i++)
- fifo->quadwords[i] = NULL;
-
- /* adjust FIFO pointers */
- fifo->origin = fifo->origin + horizon;
- fifo->next = fifo->next - horizon;
- }
-}
-
-
-
-
-/* advance the PC by given number of data words; update STAT/FQC
- field; assume FIFO is filled enough; classify passed-over words;
- write FIFO trace line */
-
-void
-pke_pc_advance(struct pke_device* me, int num_words)
-{
- int num = num_words;
- struct fifo_quadword* fq = NULL;
- unsigned_4 old_fifo_pc = me->fifo_pc;
-
- ASSERT(num_words >= 0);
-
- /* printf("pke %d pc_advance num_words %d\n", me->pke_number, num_words); */
-
- while(1)
- {
- /* find next quadword, if any */
- fq = pke_fifo_access(& me->fifo, me->fifo_pc);
-
- /* skip over DMA tag words if present in word 0 or 1 */
- if(fq != NULL && fq->word_class[me->qw_pc] == wc_dma)
- {
- /* skip by going around loop an extra time */
- num ++;
- }
-
- /* nothing left to skip / no DMA tag here */
- if(num == 0)
- break;
-
- /* we are supposed to skip existing words */
- ASSERT(fq != NULL);
-
- /* one word skipped */
- num --;
-
- /* point to next word */
- me->qw_pc ++;
- if(me->qw_pc == 4)
- {
- me->qw_pc = 0;
- me->fifo_pc ++;
-
- /* trace the consumption of the FIFO quadword we just skipped over */
- /* fq still points to it */
- if ( indebug (me->dev.name))
- {
- if (( me->fifo_trace_file == NULL) &&
- ( me->fifo_trace_file_name != NULL ))
- sky_open_file (&me->fifo_trace_file, me->fifo_trace_file_name,
- (char *) NULL, _IOLBF );
-
- /* assert complete classification */
- ASSERT(fq->word_class[3] != wc_unknown);
- ASSERT(fq->word_class[2] != wc_unknown);
- ASSERT(fq->word_class[1] != wc_unknown);
- ASSERT(fq->word_class[0] != wc_unknown);
-
- /* print trace record */
- fprintf((me->fifo_trace_file != NULL) ? me->fifo_trace_file : stdout,
- "%d 0x%08x_%08x_%08x_%08x 0x%08x %c%c%c%c\n",
- (me->pke_number == 0 ? 0 : 1),
- (unsigned) fq->data[3], (unsigned) fq->data[2],
- (unsigned) fq->data[1], (unsigned) fq->data[0],
- (unsigned) fq->source_address,
- fq->word_class[3], fq->word_class[2],
- fq->word_class[1], fq->word_class[0]);
- }
- } /* next quadword */
- }
-
- /* age old entries before PC */
- if(me->fifo_pc != old_fifo_pc)
- {
- /* we advanced the fifo-pc; authorize disposal of anything
- before previous PKEcode */
- pke_fifo_old(& me->fifo, old_fifo_pc);
- }
-
- /* clear FQC if FIFO is now empty */
- fq = pke_fifo_access(& me->fifo, me->fifo_pc);
- if(fq == NULL)
- {
- PKE_REG_MASK_SET(me, STAT, FQC, 0);
- }
- else /* annote the word where the PC lands as an PKEcode */
- {
- ASSERT(fq->word_class[me->qw_pc] == wc_pkecode || fq->word_class[me->qw_pc] == wc_unknown);
- fq->word_class[me->qw_pc] = wc_pkecode;
- }
-}
-
-
-
-
-
-/* Return pointer to FIFO quadword containing given operand# in FIFO.
- `operand_num' starts at 1. Return pointer to operand word in last
- argument, if non-NULL. If FIFO is not full enough, return 0.
- Signal an ER0 indication upon skipping a DMA tag. */
-
-struct fifo_quadword*
-pke_pcrel_fifo(struct pke_device* me, int operand_num, unsigned_4** operand)
-{
- int num;
- int new_qw_pc, new_fifo_pc;
- struct fifo_quadword* fq = NULL;
-
- /* check for validity of last search results in cache */
- if(me->last_fifo_pc == me->fifo_pc &&
- me->last_qw_pc == me->qw_pc &&
- operand_num > me->last_num)
- {
- /* continue search from last stop */
- new_fifo_pc = me->last_new_fifo_pc;
- new_qw_pc = me->last_new_qw_pc;
- num = operand_num - me->last_num;
- }
- else
- {
- /* start search from scratch */
- new_fifo_pc = me->fifo_pc;
- new_qw_pc = me->qw_pc;
- num = operand_num;
- }
-
- ASSERT(num > 0);
-
- /* printf("pke %d pcrel_fifo operand_num %d\n", me->pke_number, operand_num); */
-
- do
- {
- /* one word skipped */
- num --;
-
- /* point to next word */
- new_qw_pc ++;
- if(new_qw_pc == 4)
- {
- new_qw_pc = 0;
- new_fifo_pc ++;
- }
-
- fq = pke_fifo_access(& me->fifo, new_fifo_pc);
-
- /* check for FIFO underflow */
- if(fq == NULL)
- break;
-
- /* skip over DMA tag words if present in word 0 or 1 */
- if(fq->word_class[new_qw_pc] == wc_dma)
- {
- /* set ER0 */
- PKE_REG_MASK_SET(me, STAT, ER0, 1);
-
- /* mismatch error! */
- if(! PKE_REG_MASK_GET(me, ERR, ME0))
- {
- pke_begin_interrupt_stall(me);
- /* don't stall just yet -- finish this instruction */
- /* the PPS_STALL state will be entered by pke_issue() next time */
- }
- /* skip by going around loop an extra time */
- num ++;
- }
- }
- while(num > 0);
-
- /* return pointer to operand word itself */
- if(fq != NULL)
- {
- *operand = & fq->data[new_qw_pc];
-
- /* annote the word where the pseudo-PC lands as an PKE operand */
- ASSERT(fq->word_class[new_qw_pc] == wc_pkedata || fq->word_class[new_qw_pc] == wc_unknown);
- fq->word_class[new_qw_pc] = wc_pkedata;
-
- /* store search results in cache */
- /* keys */
- me->last_fifo_pc = me->fifo_pc;
- me->last_qw_pc = me->qw_pc;
- /* values */
- me->last_num = operand_num;
- me->last_new_fifo_pc = new_fifo_pc;
- me->last_new_qw_pc = new_qw_pc;
- }
-
- return fq;
-}
-
-
-/* Return pointer to given operand# in FIFO. `operand_num' starts at 1.
- If FIFO is not full enough, return 0. Skip over DMA tags, but mark
- them as an error (ER0). */
-
-unsigned_4*
-pke_pcrel_operand(struct pke_device* me, int operand_num)
-{
- unsigned_4* operand = NULL;
- struct fifo_quadword* fifo_operand;
-
- fifo_operand = pke_pcrel_fifo(me, operand_num, & operand);
-
- if(fifo_operand == NULL)
- ASSERT(operand == NULL); /* pke_pcrel_fifo() ought leave it untouched */
-
- return operand;
-}
-
-
-/* Return a bit-field extract of given operand# in FIFO, and its
- word-accurate source-addr. `bit_offset' starts at 0, referring to
- LSB after PKE instruction word. Width must be >0, <=32. Assume
- FIFO is full enough. Skip over DMA tags, but mark them as an error
- (ER0). */
-
-unsigned_4
-pke_pcrel_operand_bits(struct pke_device* me, int bit_offset, int bit_width, unsigned_4* source_addr)
-{
- unsigned_4* word = NULL;
- unsigned_4 value;
- struct fifo_quadword* fifo_operand;
- int wordnumber, bitnumber;
- int i;
-
- wordnumber = bit_offset/32;
- bitnumber = bit_offset%32;
-
- /* find operand word with bitfield */
- fifo_operand = pke_pcrel_fifo(me, wordnumber + 1, &word);
- ASSERT(word != NULL);
-
- /* extract bitfield from word */
- value = BIT_MASK_GET(*word, bitnumber, bitnumber + bit_width - 1);
-
- /* extract source addr from fifo word */
- *source_addr = fifo_operand->source_address;
-
- /* add word offset */
- for(i=0; i<3; i++)
- if(word == & fifo_operand->data[i])
- *source_addr += sizeof(unsigned_4) * i;
-
- return value;
-}
-
-
-
-/* check for stall conditions on indicated devices (path* only on
- PKE1), do not change status; return 0 iff no stall */
-int
-pke_check_stall(struct pke_device* me, enum pke_check_target what)
-{
- int any_stall = 0;
- unsigned_4 cop2_stat, gpuif_stat;
-
- /* read status words */
- ASSERT(sizeof(unsigned_4) == 4);
- PKE_MEM_READ(me, (GIF_REG_STAT),
- & gpuif_stat,
- 4);
- PKE_MEM_READ(me, (COP2_REG_STAT_ADDR),
- & cop2_stat,
- 4);
-
- /* perform checks */
- if(what == chk_vu)
- {
- if(me->pke_number == 0)
- any_stall = BIT_MASK_GET(cop2_stat, COP2_REG_STAT_VBS0_B, COP2_REG_STAT_VBS0_E);
- else /* if(me->pke_number == 1) */
- any_stall = BIT_MASK_GET(cop2_stat, COP2_REG_STAT_VBS1_B, COP2_REG_STAT_VBS1_E);
- }
- else if(what == chk_path1) /* VU -> GPUIF */
- {
- ASSERT(me->pke_number == 1);
- if(BIT_MASK_GET(gpuif_stat, GPUIF_REG_STAT_APATH_B, GPUIF_REG_STAT_APATH_E) == 1)
- any_stall = 1;
- }
- else if(what == chk_path2) /* PKE -> GPUIF */
- {
- ASSERT(me->pke_number == 1);
- if(BIT_MASK_GET(gpuif_stat, GPUIF_REG_STAT_APATH_B, GPUIF_REG_STAT_APATH_E) == 2)
- any_stall = 1;
- }
- else if(what == chk_path3) /* DMA -> GPUIF */
- {
- ASSERT(me->pke_number == 1);
- if(BIT_MASK_GET(gpuif_stat, GPUIF_REG_STAT_APATH_B, GPUIF_REG_STAT_APATH_E) == 3)
- any_stall = 1;
- }
- else
- {
- /* invalid what */
- ASSERT(0);
- }
-
- /* any stall reasons? */
- return any_stall;
-}
-
-
-/* PKE1 only: flip the DBF bit; recompute TOPS, TOP */
-void
-pke_flip_dbf(struct pke_device* me)
-{
- int newdf;
- /* compute new TOP */
- PKE_REG_MASK_SET(me, TOP, TOP,
- PKE_REG_MASK_GET(me, TOPS, TOPS));
- /* flip DBF */
- newdf = PKE_REG_MASK_GET(me, DBF, DF) ? 0 : 1;
- PKE_REG_MASK_SET(me, DBF, DF, newdf);
- PKE_REG_MASK_SET(me, STAT, DBF, newdf);
- /* compute new TOPS */
- PKE_REG_MASK_SET(me, TOPS, TOPS,
- (PKE_REG_MASK_GET(me, BASE, BASE) +
- newdf * PKE_REG_MASK_GET(me, OFST, OFFSET)));
-
- /* this is equivalent to last word from okadaa (98-02-25):
- 1) TOP=TOPS;
- 2) TOPS=BASE + !DBF*OFFSET
- 3) DBF=!DBF */
-}
-
-
-/* set the STAT:PIS bit and send an interrupt to the 5900 */
-void
-pke_begin_interrupt_stall(struct pke_device* me)
-{
- /* set PIS */
- PKE_REG_MASK_SET(me, STAT, PIS, 1);
- sky_signal_interrupt();
-}
-
-
-
-
-/* PKEcode handler functions -- responsible for checking and
- confirming old stall conditions, executing pkecode, updating PC and
- status registers -- may assume being run on correct PKE unit */
-
-void
-pke_code_nop(struct pke_device* me, unsigned_4 pkecode)
-{
- /* done */
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tVIFNOP%s\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "[i]" : ""));
- }
- pke_pc_advance(me, 1);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
-}
-
-
-void
-pke_code_stcycl(struct pke_device* me, unsigned_4 pkecode)
-{
- int imm = BIT_MASK_GET(pkecode, PKE_OPCODE_IMM_B, PKE_OPCODE_IMM_E);
-
- /* copy immediate value into CYCLE reg */
- PKE_REG_MASK_SET(me, CYCLE, WL, BIT_MASK_GET(imm, 8, 15));
- PKE_REG_MASK_SET(me, CYCLE, CL, BIT_MASK_GET(imm, 0, 7));
- /* done */
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tSTCYCL%s %d,%d\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "[i]" : ""),
- BIT_MASK_GET(imm, 8, 15), BIT_MASK_GET(imm, 0, 7));
- }
- pke_pc_advance(me, 1);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
-}
-
-
-void
-pke_code_offset(struct pke_device* me, unsigned_4 pkecode)
-{
- int imm = BIT_MASK_GET(pkecode, PKE_OPCODE_IMM_B, PKE_OPCODE_IMM_E);
-
- /* copy 10 bits to OFFSET field */
- PKE_REG_MASK_SET(me, OFST, OFFSET, BIT_MASK_GET(imm, 0, 9));
- /* clear DBF bit */
- PKE_REG_MASK_SET(me, DBF, DF, 0);
- /* clear other DBF bit */
- PKE_REG_MASK_SET(me, STAT, DBF, 0);
- /* set TOPS = BASE */
- PKE_REG_MASK_SET(me, TOPS, TOPS, PKE_REG_MASK_GET(me, BASE, BASE));
- /* done */
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tOFFSET%s 0x%x\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "[i]" : ""),
- imm);
- }
- pke_pc_advance(me, 1);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
-}
-
-
-void
-pke_code_base(struct pke_device* me, unsigned_4 pkecode)
-{
- int imm = BIT_MASK_GET(pkecode, PKE_OPCODE_IMM_B, PKE_OPCODE_IMM_E);
-
- /* copy 10 bits to BASE field */
- PKE_REG_MASK_SET(me, BASE, BASE, BIT_MASK_GET(imm, 0, 9));
- /* done */
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tBASE%s 0x%x\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "[i]" : ""),
- imm);
- }
- pke_pc_advance(me, 1);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
-}
-
-
-void
-pke_code_itop(struct pke_device* me, unsigned_4 pkecode)
-{
- int imm = BIT_MASK_GET(pkecode, PKE_OPCODE_IMM_B, PKE_OPCODE_IMM_E);
-
- /* copy 10 bits to ITOPS field */
- PKE_REG_MASK_SET(me, ITOPS, ITOPS, BIT_MASK_GET(imm, 0, 9));
- /* done */
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tITOP%s 0x%x\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "[i]" : ""),
- imm);
- }
- pke_pc_advance(me, 1);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
-}
-
-
-void
-pke_code_stmod(struct pke_device* me, unsigned_4 pkecode)
-{
- int imm = BIT_MASK_GET(pkecode, PKE_OPCODE_IMM_B, PKE_OPCODE_IMM_E);
-
- /* copy 2 bits to MODE register */
- PKE_REG_MASK_SET(me, MODE, MDE, BIT_MASK_GET(imm, 0, 1));
- /* done */
- if(me->trace_file != NULL)
- {
- char* mode;
- if(BIT_MASK_GET(imm, 0, 1) == 0) mode = "direct";
- else if(BIT_MASK_GET(imm, 0, 1) == 1) mode = "add";
- else if(BIT_MASK_GET(imm, 0, 1) == 2) mode = "addrow";
- else mode = "3"; /* invalid mode */
-
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tSTMOD%s %s\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "[i]" : ""),
- mode);
- }
- pke_pc_advance(me, 1);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
-}
-
-
-void
-pke_code_mskpath3(struct pke_device* me, unsigned_4 pkecode)
-{
- int imm = BIT_MASK_GET(pkecode, PKE_OPCODE_IMM_B, PKE_OPCODE_IMM_E);
- unsigned_4 gif_mode;
-
- /* set appropriate bit */
- if(BIT_MASK_GET(imm, PKE_REG_MSKPATH3_B, PKE_REG_MSKPATH3_E) != 0)
- gif_mode = GIF_REG_STAT_M3P;
- else
- gif_mode = 0;
-
- /* write register to "read-only" register; gpuif code will look at M3P bit only */
- PKE_MEM_WRITE(me, GIF_REG_VIF_M3P, & gif_mode, 4);
-
- /* done */
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tMSKPATH3%s %s\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "[i]" : ""),
- (gif_mode ? "disable" : "enable"));
- }
- pke_pc_advance(me, 1);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
-}
-
-
-void
-pke_code_pkemark(struct pke_device* me, unsigned_4 pkecode)
-{
- int imm = BIT_MASK_GET(pkecode, PKE_OPCODE_IMM_B, PKE_OPCODE_IMM_E);
- /* copy 16 bits to MARK register */
- PKE_REG_MASK_SET(me, MARK, MARK, BIT_MASK_GET(imm, 0, 15));
- /* set MRK bit in STAT register - CPU2 v2.1 docs incorrect */
- PKE_REG_MASK_SET(me, STAT, MRK, 1);
- /* done */
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tMARK%s 0x%x\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "[i]" : ""),
- imm);
- }
- pke_pc_advance(me, 1);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
-}
-
-
-void
-pke_code_flushe(struct pke_device* me, unsigned_4 pkecode)
-{
- /* compute next PEW bit */
- if(pke_check_stall(me, chk_vu))
- {
- /* VU busy */
- PKE_REG_MASK_SET(me, STAT, PEW, 1);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_STALL);
- /* try again next cycle */
- }
- else
- {
- /* VU idle */
- PKE_REG_MASK_SET(me, STAT, PEW, 0);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tFLUSHE%s\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "[i]" : ""));
- }
- pke_pc_advance(me, 1);
- }
-}
-
-
-void
-pke_code_flush(struct pke_device* me, unsigned_4 pkecode)
-{
- int something_busy = 0;
-
- /* compute next PEW, PGW bits */
- if(pke_check_stall(me, chk_vu))
- {
- something_busy = 1;
- PKE_REG_MASK_SET(me, STAT, PEW, 1);
- }
- else
- PKE_REG_MASK_SET(me, STAT, PEW, 0);
-
-
- if(pke_check_stall(me, chk_path1) ||
- pke_check_stall(me, chk_path2))
- {
- something_busy = 1;
- PKE_REG_MASK_SET(me, STAT, PGW, 1);
- }
- else
- PKE_REG_MASK_SET(me, STAT, PGW, 0);
-
- /* go or no go */
- if(something_busy)
- {
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_WAIT);
- /* try again next cycle */
- }
- else
- {
- /* all idle */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tFLUSH%s\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "[i]" : ""));
- }
- pke_pc_advance(me, 1);
- }
-}
-
-
-void
-pke_code_flusha(struct pke_device* me, unsigned_4 pkecode)
-{
- int something_busy = 0;
-
- /* compute next PEW, PGW bits */
- if(pke_check_stall(me, chk_vu))
- {
- something_busy = 1;
- PKE_REG_MASK_SET(me, STAT, PEW, 1);
- }
- else
- PKE_REG_MASK_SET(me, STAT, PEW, 0);
-
-
- if(pke_check_stall(me, chk_path1) ||
- pke_check_stall(me, chk_path2) ||
- pke_check_stall(me, chk_path3))
- {
- something_busy = 1;
- PKE_REG_MASK_SET(me, STAT, PGW, 1);
- }
- else
- PKE_REG_MASK_SET(me, STAT, PGW, 0);
-
- if(something_busy)
- {
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_WAIT);
- /* try again next cycle */
- }
- else
- {
- /* all idle */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tFLUSHA%s\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "[i]" : ""));
- }
- pke_pc_advance(me, 1);
- }
-}
-
-
-void
-pke_code_pkemscal(struct pke_device* me, unsigned_4 pkecode)
-{
- /* compute next PEW bit */
- if(pke_check_stall(me, chk_vu))
- {
- /* VU busy */
- PKE_REG_MASK_SET(me, STAT, PEW, 1);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_STALL);
- /* try again next cycle */
- }
- else
- {
- unsigned_4 vu_pc;
- int imm = BIT_MASK_GET(pkecode, PKE_OPCODE_IMM_B, PKE_OPCODE_IMM_E);
-
- /* VU idle */
- PKE_REG_MASK_SET(me, STAT, PEW, 0);
-
- /* flip DBF on PKE1 */
- if(me->pke_number == 1)
- pke_flip_dbf(me);
-
- /* compute new PC for VU (host byte-order) */
- vu_pc = BIT_MASK_GET(imm, 0, 15);
- vu_pc = T2H_4(vu_pc);
-
- /* write new PC; callback function gets VU running */
- ASSERT(sizeof(unsigned_4) == 4);
- PKE_MEM_WRITE(me, (me->pke_number == 0 ? VU0_CIA : VU1_CIA),
- & vu_pc,
- 4);
-
- /* copy ITOPS field to ITOP */
- PKE_REG_MASK_SET(me, ITOP, ITOP, PKE_REG_MASK_GET(me, ITOPS, ITOPS));
-
- /* done */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tMSCAL%s 0x%x\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "[i]" : ""),
- imm);
- }
- pke_pc_advance(me, 1);
- }
-}
-
-
-
-void
-pke_code_pkemscnt(struct pke_device* me, unsigned_4 pkecode)
-{
- /* compute next PEW bit */
- if(pke_check_stall(me, chk_vu))
- {
- /* VU busy */
- PKE_REG_MASK_SET(me, STAT, PEW, 1);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_STALL);
- /* try again next cycle */
- }
- else
- {
- unsigned_4 vu_pc;
-
- /* VU idle */
- PKE_REG_MASK_SET(me, STAT, PEW, 0);
-
- /* flip DBF on PKE1 */
- if(me->pke_number == 1)
- pke_flip_dbf(me);
-
- /* read old PC */
- ASSERT(sizeof(unsigned_4) == 4);
- PKE_MEM_READ(me, (me->pke_number == 0 ? VU0_CIA : VU1_CIA),
- & vu_pc,
- 4);
-
- /* rewrite new PC; callback function gets VU running */
- ASSERT(sizeof(unsigned_4) == 4);
- PKE_MEM_WRITE(me, (me->pke_number == 0 ? VU0_CIA : VU1_CIA),
- & vu_pc,
- 4);
-
- /* copy ITOPS field to ITOP */
- PKE_REG_MASK_SET(me, ITOP, ITOP, PKE_REG_MASK_GET(me, ITOPS, ITOPS));
-
- /* done */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tMSCNT\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc);
- }
- pke_pc_advance(me, 1);
- }
-}
-
-
-void
-pke_code_pkemscalf(struct pke_device* me, unsigned_4 pkecode)
-{
- int something_busy = 0;
-
- /* compute next PEW, PGW bits */
- if(pke_check_stall(me, chk_vu))
- {
- something_busy = 1;
- PKE_REG_MASK_SET(me, STAT, PEW, 1);
- }
- else
- PKE_REG_MASK_SET(me, STAT, PEW, 0);
-
-
- if(pke_check_stall(me, chk_path1) ||
- pke_check_stall(me, chk_path2) ||
- pke_check_stall(me, chk_path3))
- {
- something_busy = 1;
- PKE_REG_MASK_SET(me, STAT, PGW, 1);
- }
- else
- PKE_REG_MASK_SET(me, STAT, PGW, 0);
-
- /* go or no go */
- if(something_busy)
- {
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_WAIT);
- /* try again next cycle */
- }
- else
- {
- unsigned_4 vu_pc;
- int imm = BIT_MASK_GET(pkecode, PKE_OPCODE_IMM_B, PKE_OPCODE_IMM_E);
-
- /* flip DBF on PKE1 */
- if(me->pke_number == 1)
- pke_flip_dbf(me);
-
- /* compute new PC for VU (host byte-order) */
- vu_pc = BIT_MASK_GET(imm, 0, 15);
- vu_pc = T2H_4(vu_pc);
-
- /* rewrite new PC; callback function gets VU running */
- ASSERT(sizeof(unsigned_4) == 4);
- PKE_MEM_WRITE(me, (me->pke_number == 0 ? VU0_CIA : VU1_CIA),
- & vu_pc,
- 4);
-
- /* copy ITOPS field to ITOP */
- PKE_REG_MASK_SET(me, ITOP, ITOP, PKE_REG_MASK_GET(me, ITOPS, ITOPS));
-
- /* done */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tMSCALF 0x%x\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- imm);
- }
- pke_pc_advance(me, 1);
- }
-}
-
-
-void
-pke_code_stmask(struct pke_device* me, unsigned_4 pkecode)
-{
- unsigned_4* mask;
-
- /* check that FIFO has one more word for STMASK operand */
- mask = pke_pcrel_operand(me, 1);
- if(mask != NULL)
- {
- /* "transferring" operand */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_XFER);
-
- /* set NUM */
- PKE_REG_MASK_SET(me, NUM, NUM, 1);
-
- /* fill the register */
- PKE_REG_MASK_SET(me, MASK, MASK, *mask);
-
- /* set NUM */
- PKE_REG_MASK_SET(me, NUM, NUM, 0);
-
- /* done */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tSTMASK 0x%x\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- *mask);
- }
- pke_pc_advance(me, 2);
- }
- else
- {
- /* need to wait for another word */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_WAIT);
- /* try again next cycle */
- }
-}
-
-
-void
-pke_code_strow(struct pke_device* me, unsigned_4 pkecode)
-{
- /* check that FIFO has four more words for STROW operand */
- unsigned_4* last_op;
-
- last_op = pke_pcrel_operand(me, 4);
- if(last_op != NULL)
- {
- /* "transferring" operand */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_XFER);
-
- /* set NUM */
- PKE_REG_MASK_SET(me, NUM, NUM, 1);
-
- /* copy ROW registers: must all exist if 4th operand exists */
- me->regs[PKE_REG_R0][0] = * pke_pcrel_operand(me, 1);
- me->regs[PKE_REG_R1][0] = * pke_pcrel_operand(me, 2);
- me->regs[PKE_REG_R2][0] = * pke_pcrel_operand(me, 3);
- me->regs[PKE_REG_R3][0] = * pke_pcrel_operand(me, 4);
-
- /* set NUM */
- PKE_REG_MASK_SET(me, NUM, NUM, 0);
-
- /* done */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tSTROW 0x%x,0x%x,0x%x,0x%x\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- * pke_pcrel_operand(me, 1),
- * pke_pcrel_operand(me, 2),
- * pke_pcrel_operand(me, 3),
- * pke_pcrel_operand(me, 4));
- }
- pke_pc_advance(me, 5);
- }
- else
- {
- /* need to wait for another word */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_WAIT);
- /* try again next cycle */
- }
-}
-
-
-void
-pke_code_stcol(struct pke_device* me, unsigned_4 pkecode)
-{
- /* check that FIFO has four more words for STCOL operand */
- unsigned_4* last_op;
-
- last_op = pke_pcrel_operand(me, 4);
- if(last_op != NULL)
- {
- /* "transferring" operand */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_XFER);
-
- /* set NUM */
- PKE_REG_MASK_SET(me, NUM, NUM, 1);
-
- /* copy COL registers: must all exist if 4th operand exists */
- me->regs[PKE_REG_C0][0] = * pke_pcrel_operand(me, 1);
- me->regs[PKE_REG_C1][0] = * pke_pcrel_operand(me, 2);
- me->regs[PKE_REG_C2][0] = * pke_pcrel_operand(me, 3);
- me->regs[PKE_REG_C3][0] = * pke_pcrel_operand(me, 4);
-
- /* set NUM */
- PKE_REG_MASK_SET(me, NUM, NUM, 0);
-
- /* done */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tSTCOL 0x%x,0x%x,0x%x,0x%x\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- * pke_pcrel_operand(me, 1),
- * pke_pcrel_operand(me, 2),
- * pke_pcrel_operand(me, 3),
- * pke_pcrel_operand(me, 4));
- }
- pke_pc_advance(me, 5);
- }
- else
- {
- /* need to wait for another word */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_WAIT);
- /* try again next cycle */
- }
-}
-
-
-void
-pke_code_mpg(struct pke_device* me, unsigned_4 pkecode)
-{
- unsigned_4* last_mpg_word;
- int num = BIT_MASK_GET(pkecode, PKE_OPCODE_NUM_B, PKE_OPCODE_NUM_E);
- int imm = BIT_MASK_GET(pkecode, PKE_OPCODE_IMM_B, PKE_OPCODE_IMM_E);
-
- /* assert 64-bit alignment of MPG operand */
- if(me->qw_pc != 3 && me->qw_pc != 1)
- return pke_code_error(me, pkecode);
-
- /* map zero to max+1 */
- if(num==0) num=0x100;
-
- /* check that FIFO has a few more words for MPG operand */
- last_mpg_word = pke_pcrel_operand(me, num*2); /* num: number of 64-bit words */
- if(last_mpg_word != NULL)
- {
- /* perform implied FLUSHE */
- if(pke_check_stall(me, chk_vu))
- {
- /* VU busy */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_STALL);
- /* retry this instruction next clock */
- }
- else
- {
- /* VU idle */
- int i;
-
- /* "transferring" operand */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_XFER);
-
- /* set NUM */
- PKE_REG_MASK_SET(me, NUM, NUM, num);
-
- /* disassembly */
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tMPG 0x%x,0x%x\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- imm, num);
- }
-
- /* transfer VU instructions, one word-pair per iteration */
- for(i=0; i<num; i++)
- {
- address_word vu_addr_base, vu_addr;
- address_word vutrack_addr_base, vutrack_addr;
- address_word vu_addr_max_size;
- unsigned_4 vu_lower_opcode, vu_upper_opcode;
- unsigned_4* operand;
- unsigned_4 source_addr;
- struct fifo_quadword* fq;
- int next_num;
- int j;
-
- /* decrement NUM */
- next_num = PKE_REG_MASK_GET(me, NUM, NUM) - 1;
- PKE_REG_MASK_SET(me, NUM, NUM, next_num);
-
- /* imm: in 64-bit units for MPG instruction */
- /* VU*_MEM0 : instruction memory */
- vu_addr_base = (me->pke_number == 0) ?
- VU0_MEM0_WINDOW_START : VU1_MEM0_WINDOW_START;
- vu_addr_max_size = (me->pke_number == 0) ?
- VU0_MEM0_SIZE : VU1_MEM0_SIZE;
- vutrack_addr_base = (me->pke_number == 0) ?
- VU0_MEM0_SRCADDR_START : VU1_MEM0_SRCADDR_START;
-
- /* compute VU address for this word-pair */
- vu_addr = vu_addr_base + (imm + i) * 8;
- /* check for vu_addr overflow */
- while(vu_addr >= vu_addr_base + vu_addr_max_size)
- vu_addr -= vu_addr_max_size;
-
- /* compute VU tracking address */
- vutrack_addr = vutrack_addr_base + ((signed_8)vu_addr - (signed_8)vu_addr_base) / 2;
-
- /* Fetch operand words; assume they are already little-endian for VU imem */
- fq = pke_pcrel_fifo(me, i*2 + 1, & operand);
- vu_lower_opcode = *operand;
-
- source_addr = fq->source_address;
- /* add word offset */
- for(j=0; j<3; j++)
- if(operand == & fq->data[j])
- source_addr += sizeof(unsigned_4) * j;
-
- fq = pke_pcrel_fifo(me, i*2 + 2, & operand);
- vu_upper_opcode = *operand;
-
- /* write data into VU memory */
- /* lower (scalar) opcode comes in first word ; macro performs H2T! */
- PKE_MEM_WRITE(me, vu_addr,
- & vu_lower_opcode,
- 4);
- /* upper (vector) opcode comes in second word ; H2T */
- ASSERT(sizeof(unsigned_4) == 4);
- PKE_MEM_WRITE(me, vu_addr + 4,
- & vu_upper_opcode,
- 4);
-
- /* write tracking address in target byte-order */
- ASSERT(sizeof(unsigned_4) == 4);
- PKE_MEM_WRITE(me, vutrack_addr,
- & source_addr,
- 4);
-
- /* disassembly */
- if(me->trace_file != NULL)
- {
- unsigned long opcodes[2] = { vu_upper_opcode, vu_lower_opcode };
- fprintf(me->trace_file, "\t");
- opcode_analyze(me->trace_file, opcodes);
- fprintf(me->trace_file, "\n");
- }
- } /* VU xfer loop */
-
- /* check NUM */
- ASSERT(PKE_REG_MASK_GET(me, NUM, NUM) == 0);
-
- /* done */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\t.EndMpg\n"
- "\t.EndDmaData\n");
- }
- pke_pc_advance(me, 1 + num*2);
- }
- } /* if FIFO full enough */
- else
- {
- /* need to wait for another word */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_WAIT);
- /* retry this instruction next clock */
- }
-}
-
-
-void
-pke_code_direct(struct pke_device* me, unsigned_4 pkecode)
-{
- /* check that FIFO has a few more words for DIRECT operand */
- unsigned_4* last_direct_word;
- int imm = BIT_MASK_GET(pkecode, PKE_OPCODE_IMM_B, PKE_OPCODE_IMM_E);
-
- /* assert 128-bit alignment of DIRECT operand */
- if(me->qw_pc != 3)
- return pke_code_error(me, pkecode);
-
- /* map zero to max+1 */
- if(imm==0) imm=0x10000;
-
- last_direct_word = pke_pcrel_operand(me, imm*4); /* imm: number of 128-bit words */
- if(last_direct_word != NULL)
- {
- /* VU idle */
- int i;
- unsigned_16 fifo_data;
-
- /* "transferring" operand */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_XFER);
-
- /* disassembly */
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\t%s 0x%x\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (IS_PKE_CMD(pkecode, DIRECT) ? "DIRECT" : "DIRECTHL"),
- imm);
- }
-
- /* transfer GPUIF quadwords, one word per iteration */
- for(i=0; i<imm*4; i++)
- {
- unsigned_4* operand = pke_pcrel_operand(me, 1+i);
-
- /* collect word into quadword */
- *A4_16(&fifo_data, 3 - (i % 4)) = *operand;
-
- /* write to GPUIF FIFO only with full quadword */
- if(i % 4 == 3)
- {
- ASSERT(sizeof(fifo_data) == 16);
- PKE_MEM_WRITE(me, GIF_PATH2_FIFO_ADDR,
- & fifo_data,
- 16);
-
- /* disassembly */
- if(me->trace_file != NULL)
- {
- char buffer[200]; /* one line of disassembly */
- gif_disassemble_pke_data(buffer, (quadword*) &fifo_data);
- fprintf(me->trace_file, "\t%s\n", buffer);
- }
- } /* write collected quadword */
- } /* GPUIF xfer loop */
-
- /* done */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\t.EndDirect\n"
- "\t.EndDmaData\n");
- }
- pke_pc_advance(me, 1 + imm*4);
- } /* if FIFO full enough */
- else
- {
- /* need to wait for another word */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_WAIT);
- /* retry this instruction next clock */
- }
-}
-
-
-void
-pke_code_directhl(struct pke_device* me, unsigned_4 pkecode)
-{
- /* treat the same as DIRECT */
- pke_code_direct(me, pkecode);
- /* dissassembly code handles DIRECT/DIRECTHL overloading */
-}
-
-
-void
-pke_code_unpack(struct pke_device* me, unsigned_4 pkecode)
-{
- int imm = BIT_MASK_GET(pkecode, PKE_OPCODE_IMM_B, PKE_OPCODE_IMM_E);
- int cmd = BIT_MASK_GET(pkecode, PKE_OPCODE_CMD_B, PKE_OPCODE_CMD_E);
- int num = BIT_MASK_GET(pkecode, PKE_OPCODE_NUM_B, PKE_OPCODE_NUM_E);
- int nummx = (num == 0) ? 0x0100 : num;
- short vn = BIT_MASK_GET(cmd, 2, 3); /* unpack shape controls */
- short vl = BIT_MASK_GET(cmd, 0, 1);
- int m = BIT_MASK_GET(cmd, 4, 4);
- short cl = PKE_REG_MASK_GET(me, CYCLE, CL); /* cycle controls */
- short wl = PKE_REG_MASK_GET(me, CYCLE, WL);
- short addrwl = (wl == 0) ? 0x0100 : wl;
- int r = BIT_MASK_GET(imm, 15, 15); /* indicator bits in imm value */
- int usn = BIT_MASK_GET(imm, 14, 14);
-
- int n, num_operands;
- unsigned_4* last_operand_word = NULL;
-
- /* catch all illegal UNPACK variants */
- if(vl == 3 && vn < 3)
- {
- pke_code_error(me, pkecode);
- return;
- }
-
- /* compute PKEcode length, as given in CPU2 spec, v2.1 pg. 11 */
- if(cl >= addrwl)
- n = num;
- else
- n = cl * (nummx / addrwl) + PKE_LIMIT(nummx % addrwl, cl);
- num_operands = (31 + (32 >> vl) * (vn+1) * n)/32; /* round up to next word */
-
- /* confirm that FIFO has enough words in it */
- if(num_operands > 0)
- last_operand_word = pke_pcrel_operand(me, num_operands);
- if(last_operand_word != NULL || num_operands == 0)
- {
- address_word vu_addr_base, vutrack_addr_base;
- address_word vu_addr_max_size;
- int vector_num_out, vector_num_in;
-
- /* "transferring" operand */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_XFER);
-
- /* disassembly */
- if(me->trace_file != NULL)
- {
- char unpack_type[8];
- char flags[8];
- sprintf(flags,"[%s%s%s%s]",
- (m ? "m" : ""),
- (usn ? "u" : ""),
- (r ? "r" : ""),
- (BIT_MASK_GET(pkecode, PKE_OPCODE_I_B, PKE_OPCODE_I_E) ? "i" : ""));
- if(vn > 0)
- sprintf(unpack_type, "V%d_%d",
- (vn + 1),
- (vl == 3 ? 5 : (32 >> vl)));
- else
- sprintf(unpack_type, "S_%d",
- (vl == 3 ? 5 : (32 >> vl)));
-
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\tUNPACK%s %s,0x%x,0x%x\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- flags, unpack_type, imm, num);
- }
-
- /* don't check whether VU is idle */
-
- /* compute VU address base */
- if(me->pke_number == 0)
- {
- vu_addr_base = VU0_MEM1_WINDOW_START;
- vu_addr_max_size = VU0_MEM1_SIZE;
- vutrack_addr_base = VU0_MEM1_SRCADDR_START;
- r = 0;
- }
- else
- {
- vu_addr_base = VU1_MEM1_WINDOW_START;
- vu_addr_max_size = VU1_MEM1_SIZE;
- vutrack_addr_base = VU1_MEM1_SRCADDR_START;
- }
-
- /* set NUM */
- PKE_REG_MASK_SET(me, NUM, NUM, nummx);
-
- /* transfer given number of vectors */
- vector_num_out = 0; /* output vector number being processed */
- vector_num_in = 0; /* argument vector number being processed */
- do
- {
- quadword vu_old_data;
- quadword vu_new_data;
- quadword unpacked_data;
- address_word vu_addr;
- address_word vutrack_addr;
- unsigned_4 source_addr = 0;
- int i;
- int next_num;
-
- /* decrement NUM */
- next_num = PKE_REG_MASK_GET(me, NUM, NUM) - 1;
- PKE_REG_MASK_SET(me, NUM, NUM, next_num);
-
- /* compute VU destination address, as bytes in R5900 memory */
- if(cl >= wl)
- {
- /* map zero to max+1 */
- vu_addr = vu_addr_base + 16 * (BIT_MASK_GET(imm, 0, 9) +
- (vector_num_out / addrwl) * cl +
- (vector_num_out % addrwl));
- }
- else
- vu_addr = vu_addr_base + 16 * (BIT_MASK_GET(imm, 0, 9) +
- vector_num_out);
-
- /* handle "R" double-buffering bit */
- if(r)
- vu_addr += 16 * PKE_REG_MASK_GET(me, TOPS, TOPS);
-
- /* check for vu_addr overflow */
- while(vu_addr >= vu_addr_base + vu_addr_max_size)
- vu_addr -= vu_addr_max_size;
-
- /* compute address of tracking table entry */
- vutrack_addr = vutrack_addr_base + ((signed_8)vu_addr - (signed_8)vu_addr_base) / 4;
-
- /* read old VU data word at address; reverse words if needed */
- {
- unsigned_16 vu_old_badwords;
- ASSERT(sizeof(vu_old_badwords) == 16);
- PKE_MEM_READ(me, vu_addr,
- &vu_old_badwords, 16);
- vu_old_data[0] = * A4_16(& vu_old_badwords, 3);
- vu_old_data[1] = * A4_16(& vu_old_badwords, 2);
- vu_old_data[2] = * A4_16(& vu_old_badwords, 1);
- vu_old_data[3] = * A4_16(& vu_old_badwords, 0);
- }
-
- /* For cyclic unpack, next operand quadword may come from instruction stream
- or be zero. */
- if((cl < addrwl) &&
- (vector_num_out % addrwl) >= cl)
- {
- /* clear operand - used only in a "indeterminate" state */
- for(i = 0; i < 4; i++)
- unpacked_data[i] = 0;
- }
- else
- {
- /* compute packed vector dimensions */
- int vectorbits = 0, unitbits = 0;
-
- /* disassembly */
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file, "\t; unpack input row %d\n", vector_num_in);
- }
-
- if(vl < 3) /* PKE_UNPACK_*_{32,16,8} */
- {
- unitbits = (32 >> vl);
- vectorbits = unitbits * (vn+1);
- }
- else if(vl == 3 && vn == 3) /* PKE_UNPACK_V4_5 */
- {
- unitbits = 5;
- vectorbits = 16;
- }
- else /* illegal unpack variant */
- {
- /* should have been caught at top of function */
- ASSERT(0);
- }
-
- /* loop over columns */
- for(i=0; i<=vn; i++)
- {
- unsigned_4 operand;
-
- /* offset in bits in current operand word */
- int bitoffset =
- (vector_num_in * vectorbits) + (i * unitbits); /* # of bits from PKEcode */
-
- /* last unit of V4_5 is only one bit wide */
- if(vl == 3 && vn == 3 && i == 3) /* PKE_UNPACK_V4_5 */
- unitbits = 1;
-
- /* confirm we're not reading more than we said we needed */
- if(vector_num_in * vectorbits >= num_operands * 32)
- {
- /* this condition may be triggered by illegal
- PKEcode / CYCLE combinations. */
- pke_code_error(me, pkecode);
- /* XXX: this case needs to be better understood,
- and detected at a better time. */
- return;
- }
-
- /* fetch bitfield operand */
- operand = pke_pcrel_operand_bits(me, bitoffset, unitbits, & source_addr);
-
- /* disassemble */
- if(me->trace_file != NULL && vl < 3) /* not for V4_5 */
- {
- char* data_size;
- if(vl == 0) data_size=".word";
- else if(vl == 1) data_size=".short";
- else if(vl == 2) data_size=".byte";
- else data_size = "<invalid>";
-
- fprintf(me->trace_file, "\t%s 0x%x\n", data_size, operand);
- }
-
- /* selectively sign-extend; not for V4_5 1-bit value */
- if(usn || unitbits == 1)
- unpacked_data[i] = operand;
- else
- unpacked_data[i] = SEXT32(operand, unitbits-1);
- }
-
- /* disassemble */
- if(me->trace_file != NULL && vl == 3) /* only for V4_5 */
- {
- unsigned short operand =
- ((unpacked_data[0] & 0x1f) << 0) |
- ((unpacked_data[1] & 0x1f) << 5) |
- ((unpacked_data[2] & 0x1f) << 10) |
- ((unpacked_data[3] & 0x1) << 15);
-
- fprintf(me->trace_file, "\t.short 0x%x\n", operand);
- }
-
- /* set remaining top words in vector */
- for(i=vn+1; i<4; i++)
- {
- if(vn == 0) /* S_{32,16,8}: copy lowest element */
- unpacked_data[i] = unpacked_data[0];
- else
- unpacked_data[i] = 0;
- }
-
- /* consumed a vector from the PKE instruction stream */
- vector_num_in ++;
- } /* unpack word from instruction operand */
-
- /* process STMOD register for accumulation operations */
- switch(PKE_REG_MASK_GET(me, MODE, MDE))
- {
- case PKE_MODE_ADDROW: /* add row registers to output data */
- case PKE_MODE_ACCROW: /* same .. later conditionally accumulate */
- for(i=0; i<4; i++)
- /* exploit R0..R3 contiguity */
- unpacked_data[i] += me->regs[PKE_REG_R0 + i][0];
- break;
-
- case PKE_MODE_INPUT: /* pass data through */
- default: /* specified as undefined */
- ;
- }
-
- /* compute replacement word */
- if(m) /* use mask register? */
- {
- /* compute index into mask register for this word */
- int mask_index = PKE_LIMIT(vector_num_out % addrwl, 3);
-
- for(i=0; i<4; i++) /* loop over columns */
- {
- int mask_op = PKE_MASKREG_GET(me, mask_index, i);
- unsigned_4* masked_value = NULL;
-
- switch(mask_op)
- {
- case PKE_MASKREG_INPUT:
- masked_value = & unpacked_data[i];
-
- /* conditionally accumulate */
- if(PKE_REG_MASK_GET(me, MODE, MDE) == PKE_MODE_ACCROW)
- me->regs[PKE_REG_R0 + i][0] = unpacked_data[i];
-
- break;
-
- case PKE_MASKREG_ROW: /* exploit R0..R3 contiguity */
- masked_value = & me->regs[PKE_REG_R0 + i][0];
- break;
-
- case PKE_MASKREG_COLUMN: /* exploit C0..C3 contiguity */
- masked_value = & me->regs[PKE_REG_C0 + mask_index][0];
- break;
-
- case PKE_MASKREG_NOTHING:
- /* "write inhibit" by re-copying old data */
- masked_value = & vu_old_data[i];
- break;
-
- default:
- ASSERT(0);
- /* no other cases possible */
- }
-
- /* copy masked value for column */
- vu_new_data[i] = *masked_value;
- } /* loop over columns */
- } /* mask */
- else
- {
- /* no mask - just copy over entire unpacked quadword */
- memcpy(vu_new_data, unpacked_data, sizeof(unpacked_data));
-
- /* conditionally store accumulated row results */
- if(PKE_REG_MASK_GET(me, MODE, MDE) == PKE_MODE_ACCROW)
- for(i=0; i<4; i++)
- me->regs[PKE_REG_R0 + i][0] = unpacked_data[i];
- }
-
- /* write new VU data word at address; reverse words if needed */
- {
- unsigned_16 vu_new_badwords;
- * A4_16(& vu_new_badwords, 3) = vu_new_data[0];
- * A4_16(& vu_new_badwords, 2) = vu_new_data[1];
- * A4_16(& vu_new_badwords, 1) = vu_new_data[2];
- * A4_16(& vu_new_badwords, 0) = vu_new_data[3];
- ASSERT(sizeof(vu_new_badwords) == 16);
- PKE_MEM_WRITE(me, vu_addr,
- &vu_new_badwords, 16);
- }
-
- /* write tracking address */
- ASSERT(sizeof(unsigned_4) == 4);
- PKE_MEM_WRITE(me, vutrack_addr,
- & source_addr,
- 4);
-
- /* next vector please */
- vector_num_out ++;
- } /* vector transfer loop */
- while(PKE_REG_MASK_GET(me, NUM, NUM) > 0);
-
- /* confirm we've written as many vectors as told */
- ASSERT(nummx == vector_num_out);
-
- /* done */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\t.EndUnpack\n"
- "\t.EndDmaData\n");
- }
- pke_pc_advance(me, 1 + num_operands);
- } /* PKE FIFO full enough */
- else
- {
- /* need to wait for another word */
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_WAIT);
- /* retry this instruction next clock */
- }
-}
-
-
-void
-pke_code_error(struct pke_device* me, unsigned_4 pkecode)
-{
- /* set ER1 flag in STAT register */
- PKE_REG_MASK_SET(me, STAT, ER1, 1);
-
- if(! PKE_REG_MASK_GET(me, ERR, ME1))
- {
- pke_begin_interrupt_stall(me);
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_STALL);
- }
- else
- {
- PKE_REG_MASK_SET(me, STAT, PPS, PKE_REG_STAT_PPS_IDLE);
- }
-
- if(me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n; %s PC %d/%d\n"
- "\tDmaCnt *\n"
- "\t.word 0x%x\n"
- "\t.EndDmaData\n",
- me->dev.name, me->fifo_pc, me->qw_pc,
- (long) pkecode);
- }
-
- /* advance over faulty word */
- pke_pc_advance(me, 1);
-}
-
-void
-pke_options(struct pke_device *me, unsigned_4 option, char *option_string)
-{
- switch (option)
- {
- case SKY_OPT_DEBUG_NAME:
- if ( me->fifo_trace_file != NULL )
- {
- fclose (me->fifo_trace_file);
- me->fifo_trace_file = NULL;
- }
- sky_store_file_name (&me->fifo_trace_file_name, option_string);
- break;
-
- case SKY_OPT_TRACE_ON:
- me->flags |= PKE_FLAG_TRACE_ON;
- break;
-
- case SKY_OPT_TRACE_OFF:
- case SKY_OPT_TRACE_NAME:
- if ( me->trace_file != NULL )
- {
- fprintf(me->trace_file,
- "\n\n\tDmaEnd 0\n"
- "\t.EndDmaData\n");
- fclose (me->trace_file);
- me->trace_file = NULL;
- }
-
- if ( option == SKY_OPT_TRACE_OFF )
- me->flags &= ~PKE_FLAG_TRACE_ON;
- else
- sky_store_file_name (&me->trace_file_name, option_string);
-
- break;
-
- case SKY_OPT_CLOSE:
- if (me->trace_file != NULL)
- {
- fprintf(me->trace_file,
- "\n\n\tDmaEnd 0\n"
- "\t.EndDmaData\n");
- fclose(me->trace_file);
- me->trace_file = NULL;
- }
- if (me->fifo_trace_file != NULL )
- fclose (me->fifo_trace_file);
- me->fifo_trace_file = NULL;
- break;
-
- default:
- ASSERT (0);
- break;
- }
-
- return;
-}
+++ /dev/null
-/* Copyright (C) 1998, Cygnus Solutions */
-
-#ifndef H_PKE_H
-#define H_PKE_H
-
-#include "sim-main.h"
-#include "sky-device.h"
-
-
-/* External functions */
-
-struct pke_fifo;
-struct fifo_quadword;
-struct pke_device;
-
-void pke0_attach(SIM_DESC sd);
-void pke0_issue(SIM_DESC sd);
-void pke1_attach(SIM_DESC sd);
-void pke1_issue(SIM_DESC sd);
-
-void pke_options(struct pke_device *device, unsigned_4 option, char *option_string);
-int read_pke_reg (struct pke_device *device, int regno, void *buf);
-int write_pke_reg (struct pke_device *device, int regno, const void *buf);
-int read_pke_pc (struct pke_device *device, void *buf);
-int read_pke_pcx (struct pke_device *device, void *buf);
-struct fifo_quadword* pke_fifo_access(struct pke_fifo*, unsigned_4 qwnum);
-
-
-/* Quadword data type */
-
-typedef unsigned_4 quadword[4];
-
-/* truncate address to quadword */
-#define ADDR_TRUNC_QW(addr) ((addr) & ~0x0f)
-/* extract offset in quadword */
-#define ADDR_OFFSET_QW(addr) ((addr) & 0x0f)
-
-
-/* SCEI memory mapping information */
-
-#define PKE0_REGISTER_WINDOW_START 0x10003800
-#define PKE1_REGISTER_WINDOW_START 0x10003C00
-#define PKE0_FIFO_ADDR 0x10004000
-#define PKE1_FIFO_ADDR 0x10005000
-
-
-/* VU source-addr tracking tables */ /* changed from 1998-01-22 e-mail plans */
-#define VU0_MEM0_SRCADDR_START 0x19800000
-#define VU0_MEM1_SRCADDR_START 0x19804000
-#define VU1_MEM0_SRCADDR_START 0x19808000
-#define VU1_MEM1_SRCADDR_START 0x1980C000
-
-#define VU0_CIA (VU0_REGISTER_WINDOW_START + VU_REG_CIA)
-#define VU1_CIA (VU1_REGISTER_WINDOW_START + VU_REG_CIA)
-
-/* GPUIF STAT register */
-#define GPUIF_REG_STAT_APATH_E 11
-#define GPUIF_REG_STAT_APATH_B 10
-
-/* COP2 STAT register */
-#define COP2_REG_STAT_ADDR VPU_STAT_ADDR
-#define COP2_REG_STAT_VBS1_E 8
-#define COP2_REG_STAT_VBS1_B 8
-#define COP2_REG_STAT_VBS0_E 0
-#define COP2_REG_STAT_VBS0_B 0
-
-
-/* Quadword indices of PKE registers. Actual registers sit at bottom
- 32 bits of each quadword. */
-#define PKE_REG_STAT 0x00
-#define PKE_REG_FBRST 0x01
-#define PKE_REG_ERR 0x02
-#define PKE_REG_MARK 0x03
-#define PKE_REG_CYCLE 0x04
-#define PKE_REG_MODE 0x05
-#define PKE_REG_NUM 0x06
-#define PKE_REG_MASK 0x07
-#define PKE_REG_CODE 0x08
-#define PKE_REG_ITOPS 0x09
-#define PKE_REG_BASE 0x0a /* pke1 only */
-#define PKE_REG_OFST 0x0b /* pke1 only */
-#define PKE_REG_TOPS 0x0c /* pke1 only */
-#define PKE_REG_ITOP 0x0d
-#define PKE_REG_TOP 0x0e /* pke1 only */
-#define PKE_REG_DBF 0x0f /* pke1 only */
-#define PKE_REG_R0 0x10 /* R0 .. R3 must be contiguous */
-#define PKE_REG_R1 0x11
-#define PKE_REG_R2 0x12
-#define PKE_REG_R3 0x13
-#define PKE_REG_C0 0x14 /* C0 .. C3 must be contiguous */
-#define PKE_REG_C1 0x15
-#define PKE_REG_C2 0x16
-#define PKE_REG_C3 0x17
-/* one plus last index */
-#define PKE_NUM_REGS 0x18
-
-#define PKE_REGISTER_WINDOW_SIZE (sizeof(quadword) * PKE_NUM_REGS)
-
-
-
-/* PKE commands */
-
-#define PKE_CMD_PKENOP_MASK 0x7F
-#define PKE_CMD_PKENOP_BITS 0x00
-#define PKE_CMD_STCYCL_MASK 0x7F
-#define PKE_CMD_STCYCL_BITS 0x01
-#define PKE_CMD_OFFSET_MASK 0x7F
-#define PKE_CMD_OFFSET_BITS 0x02
-#define PKE_CMD_BASE_MASK 0x7F
-#define PKE_CMD_BASE_BITS 0x03
-#define PKE_CMD_ITOP_MASK 0x7F
-#define PKE_CMD_ITOP_BITS 0x04
-#define PKE_CMD_STMOD_MASK 0x7F
-#define PKE_CMD_STMOD_BITS 0x05
-#define PKE_CMD_MSKPATH3_MASK 0x7F
-#define PKE_CMD_MSKPATH3_BITS 0x06
-#define PKE_CMD_PKEMARK_MASK 0x7F
-#define PKE_CMD_PKEMARK_BITS 0x07
-#define PKE_CMD_FLUSHE_MASK 0x7F
-#define PKE_CMD_FLUSHE_BITS 0x10
-#define PKE_CMD_FLUSH_MASK 0x7F
-#define PKE_CMD_FLUSH_BITS 0x11
-#define PKE_CMD_FLUSHA_MASK 0x7F
-#define PKE_CMD_FLUSHA_BITS 0x13
-#define PKE_CMD_PKEMSCAL_MASK 0x7F /* CAL == "call" */
-#define PKE_CMD_PKEMSCAL_BITS 0x14
-#define PKE_CMD_PKEMSCNT_MASK 0x7F /* CNT == "continue" */
-#define PKE_CMD_PKEMSCNT_BITS 0x17
-#define PKE_CMD_PKEMSCALF_MASK 0x7F /* CALF == "call after flush" */
-#define PKE_CMD_PKEMSCALF_BITS 0x15
-#define PKE_CMD_STMASK_MASK 0x7F
-#define PKE_CMD_STMASK_BITS 0x20
-#define PKE_CMD_STROW_MASK 0x7F
-#define PKE_CMD_STROW_BITS 0x30
-#define PKE_CMD_STCOL_MASK 0x7F
-#define PKE_CMD_STCOL_BITS 0x31
-#define PKE_CMD_MPG_MASK 0x7F
-#define PKE_CMD_MPG_BITS 0x4A
-#define PKE_CMD_DIRECT_MASK 0x7F
-#define PKE_CMD_DIRECT_BITS 0x50
-#define PKE_CMD_DIRECTHL_MASK 0x7F
-#define PKE_CMD_DIRECTHL_BITS 0x51
-#define PKE_CMD_UNPACK_MASK 0x60
-#define PKE_CMD_UNPACK_BITS 0x60
-
-/* test given word for particular PKE command bit pattern */
-#define IS_PKE_CMD(word,cmd) (((word) & PKE_CMD_##cmd##_MASK) == PKE_CMD_##cmd##_BITS)
-
-
-/* register bitmasks: bit numbers for end and beginning of fields */
-
-/* PKE opcode */
-#define PKE_OPCODE_I_E 31
-#define PKE_OPCODE_I_B 31
-#define PKE_OPCODE_CMD_E 30
-#define PKE_OPCODE_CMD_B 24
-#define PKE_OPCODE_NUM_E 23
-#define PKE_OPCODE_NUM_B 16
-#define PKE_OPCODE_IMM_E 15
-#define PKE_OPCODE_IMM_B 0
-
-/* STAT register */
-#define PKE_REG_STAT_FQC_E 28
-#define PKE_REG_STAT_FQC_B 24
-#define PKE_REG_STAT_FDR_E 23
-#define PKE_REG_STAT_FDR_B 23
-#define PKE_REG_STAT_ER1_E 13
-#define PKE_REG_STAT_ER1_B 13
-#define PKE_REG_STAT_ER0_E 12
-#define PKE_REG_STAT_ER0_B 12
-#define PKE_REG_STAT_INT_E 11
-#define PKE_REG_STAT_INT_B 11
-#define PKE_REG_STAT_PIS_E 10
-#define PKE_REG_STAT_PIS_B 10
-#define PKE_REG_STAT_PFS_E 9
-#define PKE_REG_STAT_PFS_B 9
-#define PKE_REG_STAT_PSS_E 8
-#define PKE_REG_STAT_PSS_B 8
-#define PKE_REG_STAT_DBF_E 7
-#define PKE_REG_STAT_DBF_B 7
-#define PKE_REG_STAT_MRK_E 6
-#define PKE_REG_STAT_MRK_B 6
-#define PKE_REG_STAT_PGW_E 3
-#define PKE_REG_STAT_PGW_B 3
-#define PKE_REG_STAT_PEW_E 2
-#define PKE_REG_STAT_PEW_B 2
-#define PKE_REG_STAT_PPS_E 1
-#define PKE_REG_STAT_PPS_B 0
-
-#define PKE_REG_STAT_PPS_IDLE 0x00 /* ready to execute next instruction */
-#define PKE_REG_STAT_PPS_WAIT 0x01 /* not enough words in FIFO */
-#define PKE_REG_STAT_PPS_DECODE 0x02 /* decoding instruction */
-#define PKE_REG_STAT_PPS_STALL 0x02 /* alias state for stall (e.g., FLUSHE) */
-#define PKE_REG_STAT_PPS_XFER 0x03 /* transferring instruction operands */
-
-/* DBF register */
-#define PKE_REG_DBF_DF_E 0
-#define PKE_REG_DBF_DF_B 0
-
-/* OFST register */
-#define PKE_REG_OFST_OFFSET_E 9
-#define PKE_REG_OFST_OFFSET_B 0
-
-/* OFST register */
-#define PKE_REG_TOPS_TOPS_E 9
-#define PKE_REG_TOPS_TOPS_B 0
-
-/* BASE register */
-#define PKE_REG_BASE_BASE_E 9
-#define PKE_REG_BASE_BASE_B 0
-
-/* ITOPS register */
-#define PKE_REG_ITOPS_ITOPS_E 9
-#define PKE_REG_ITOPS_ITOPS_B 0
-
-/* MODE register */
-#define PKE_REG_MODE_MDE_E 1
-#define PKE_REG_MODE_MDE_B 0
-
-/* NUM register */
-#define PKE_REG_NUM_NUM_E 9
-#define PKE_REG_NUM_NUM_B 0
-
-/* MARK register */
-#define PKE_REG_MARK_MARK_E 15
-#define PKE_REG_MARK_MARK_B 0
-
-/* ITOP register */
-#define PKE_REG_ITOP_ITOP_E 9
-#define PKE_REG_ITOP_ITOP_B 0
-
-/* TOP register */
-#define PKE_REG_TOP_TOP_E 9
-#define PKE_REG_TOP_TOP_B 0
-
-/* MASK register */
-#define PKE_REG_MASK_MASK_E 31
-#define PKE_REG_MASK_MASK_B 0
-
-/* CYCLE register */
-#define PKE_REG_CYCLE_WL_E 15
-#define PKE_REG_CYCLE_WL_B 8
-#define PKE_REG_CYCLE_CL_E 7
-#define PKE_REG_CYCLE_CL_B 0
-
-/* ERR register */
-#define PKE_REG_ERR_ME1_E 2
-#define PKE_REG_ERR_ME1_B 2
-#define PKE_REG_ERR_ME0_E 1
-#define PKE_REG_ERR_ME0_B 1
-#define PKE_REG_ERR_MII_E 0
-#define PKE_REG_ERR_MII_B 0
-
-/* FBRST command bitfields */
-#define PKE_REG_FBRST_STC_E 3
-#define PKE_REG_FBRST_STC_B 3
-#define PKE_REG_FBRST_STP_E 2
-#define PKE_REG_FBRST_STP_B 2
-#define PKE_REG_FBRST_FBK_E 1
-#define PKE_REG_FBRST_FBK_B 1
-#define PKE_REG_FBRST_RST_E 0
-#define PKE_REG_FBRST_RST_B 0
-
-/* MSKPATH3 command bitfields */
-#define PKE_REG_MSKPATH3_E 15
-#define PKE_REG_MSKPATH3_B 15
-
-
-/* UNPACK opcodes */
-#define PKE_UNPACK(vn,vl) ((vn) << 2 | (vl))
-#define PKE_UNPACK_S_32 PKE_UNPACK(0, 0)
-#define PKE_UNPACK_S_16 PKE_UNPACK(0, 1)
-#define PKE_UNPACK_S_8 PKE_UNPACK(0, 2)
-#define PKE_UNPACK_V2_32 PKE_UNPACK(1, 0)
-#define PKE_UNPACK_V2_16 PKE_UNPACK(1, 1)
-#define PKE_UNPACK_V2_8 PKE_UNPACK(1, 2)
-#define PKE_UNPACK_V3_32 PKE_UNPACK(2, 0)
-#define PKE_UNPACK_V3_16 PKE_UNPACK(2, 1)
-#define PKE_UNPACK_V3_8 PKE_UNPACK(2, 2)
-#define PKE_UNPACK_V4_32 PKE_UNPACK(3, 0)
-#define PKE_UNPACK_V4_16 PKE_UNPACK(3, 1)
-#define PKE_UNPACK_V4_8 PKE_UNPACK(3, 2)
-#define PKE_UNPACK_V4_5 PKE_UNPACK(3, 3)
-
-
-/* MASK register sub-field definitions */
-#define PKE_MASKREG_INPUT 0
-#define PKE_MASKREG_ROW 1
-#define PKE_MASKREG_COLUMN 2
-#define PKE_MASKREG_NOTHING 3
-
-
-/* STMOD register field definitions */
-#define PKE_MODE_INPUT 0
-#define PKE_MODE_ADDROW 1
-#define PKE_MODE_ACCROW 2
-
-
-/* extract a MASK register sub-field for row [0..3] and column [0..3] */
-/* MASK register is laid out of 2-bit values in this r-c order */
-/* m33 m32 m31 m30 m23 m22 m21 m20 m13 m12 m11 m10 m03 m02 m01 m00 */
-#define PKE_MASKREG_GET(me,row,col) \
-((((me)->regs[PKE_REG_MASK][0]) >> (8*(row) + 2*(col))) & 0x03)
-
-
-/* operations - replace with those in sim-bits.h when convenient */
-
-/* unsigned 32-bit mask of given width */
-#define BIT_MASK(width) ((width) == 31 ? 0xffffffff : (((unsigned_4)1) << (width+1)) - 1)
-/* e.g.: BIT_MASK(4) = 00011111 */
-
-/* mask between given given bits numbers (MSB) */
-#define BIT_MASK_BTW(begin,end) ((BIT_MASK(end) & ~((begin) == 0 ? 0 : BIT_MASK((begin)-1))))
-/* e.g.: BIT_MASK_BTW(4,11) = 0000111111110000 */
-
-/* set bitfield value */
-#define BIT_MASK_SET(lvalue,begin,end,value) \
-do { \
- ASSERT((begin) <= (end)); \
- (lvalue) &= ~BIT_MASK_BTW((begin),(end)); \
- (lvalue) |= ((value) << (begin)) & BIT_MASK_BTW((begin),(end)); \
-} while(0)
-
-/* get bitfield value */
-#define BIT_MASK_GET(rvalue,begin,end) \
- (((rvalue) & BIT_MASK_BTW(begin,end)) >> (begin))
-/* e.g., BIT_MASK_GET(0000111100001111, 2, 8) = 0000000100001100 */
-
-/* These ugly macro hacks allow succinct bitfield accesses */
-/* set a bitfield in a register by "name" */
-#define PKE_REG_MASK_SET(me,reg,flag,value) \
- do { \
- unsigned_4 old = BIT_MASK_GET(((me)->regs[PKE_REG_##reg][0]), \
- PKE_REG_##reg##_##flag##_B, PKE_REG_##reg##_##flag##_E); \
- BIT_MASK_SET(((me)->regs[PKE_REG_##reg][0]), \
- PKE_REG_##reg##_##flag##_B, PKE_REG_##reg##_##flag##_E, \
- (value)); \
- if( indebug ((me)->dev.name)) \
- { \
- if (old != (value)) \
- { \
- if (((me)->fifo_trace_file == NULL ) && \
- ((me)->fifo_trace_file_name != NULL )) \
- sky_open_file (&((me)->fifo_trace_file), \
- (me)->fifo_trace_file_name, \
- (char *) NULL, _IOLBF ); \
- fprintf (((me)->fifo_trace_file != NULL) ? \
- (me)->fifo_trace_file : stdout, \
- "# Reg %s:%s = 0x%x\n", #reg, #flag, (unsigned)(value)); \
- } \
- } \
- } while(0)
-
-/* get a bitfield from a register by "name" */
-#define PKE_REG_MASK_GET(me,reg,flag) \
- BIT_MASK_GET(((me)->regs[PKE_REG_##reg][0]), \
- PKE_REG_##reg##_##flag##_B, PKE_REG_##reg##_##flag##_E)
-
-
-#define PKE_LIMIT(value,max) ((value) > (max) ? (max) : (value))
-
-
-/* Classify words in a FIFO quadword */
-enum wordclass
-{
- wc_dma = 'D',
- wc_pkecode = 'P',
- wc_unknown = '?',
- wc_pkedata = '.',
- wc_gpuiftag = 'g'
-};
-
-
-/* One row in the FIFO */
-struct fifo_quadword
-{
- /* 128 bits of data */
- quadword data;
- /* source main memory address (or 0: unknown) */
- unsigned_4 source_address;
- /* classification of words in quadword; wc_dma set on DMA tags at FIFO write */
- enum wordclass word_class[4];
-};
-
-
-/* quadword FIFO structure for PKE */
-typedef struct pke_fifo
-{
- struct fifo_quadword** quadwords; /* pointer to fifo quadwords */
- unsigned_4 origin; /* quadword serial number of quadwords[0] */
- unsigned_4 length; /* length of quadword pointer array: 0..N */
- unsigned_4 next; /* relative index of first unfilled quadword: 0..length-1 */
-} pke_fifo;
-
-#define PKE_FIFO_GROW_SIZE 1000 /* number of quadword pointers to allocate */
-#define PKE_FIFO_ARCHEOLOGY 1000 /* number of old quadwords to keep as history */
-
-
-
-/* PKE internal state: FIFOs, registers, handle to VU friend */
-struct pke_device
-{
- /* common device info */
- device dev;
-
- /* identity: 0=PKE0, 1=PKE1 */
- int pke_number;
- int flags;
-
- /* quadword registers: data in [0] word only */
- quadword regs[PKE_NUM_REGS];
-
- /* write buffer for FIFO address */
- quadword fifo_qw_in_progress;
- int fifo_qw_done; /* bitfield */
-
- /* FIFO - private: use only pke_fifo_* routines to access */
- struct pke_fifo fifo; /* array of FIFO quadword pointers */
- FILE* fifo_trace_file; /* stdio stream open in append mode, or 0 for no trace */
- char* fifo_trace_file_name; /* user defined debug trace file name */
-
- /* FIFO cache -- curry last search pke_pcrel_fifo results */
- unsigned_4 last_fifo_pc;
- unsigned_4 last_qw_pc;
- unsigned_4 last_num;
- unsigned_4 last_new_fifo_pc;
- unsigned_4 last_new_qw_pc;
-
- /* PC */
- int fifo_pc; /* 0 .. (fifo_num_elements-1): quadword index of next instruction */
- int qw_pc; /* 0 .. 3: word index of next instruction */
-
- /* Disassembly state */
- FILE *trace_file;
- char *trace_file_name;
-};
-
-
-extern struct pke_device pke0_device;
-extern struct pke_device pke1_device;
-
-
-
-/* Flags for PKE.flags */
-
-#define PKE_FLAG_NONE 0x00
-#define PKE_FLAG_PENDING_PSS 0x01 /* PSS bit written-to; set STAT:PSS after current instruction */
-#define PKE_FLAG_INT_NOLOOP 0x02 /* INT PKEcode received; INT/PIS set; suppress loop after resumption */
-#define PKE_FLAG_TRACE_ON 0x04 /* Trace file request from command line */
-
-/* Kludge alert */
-
-#define PKE_MEM_READ(me,addr,data,size) \
- do { \
- sim_cpu* cpu = STATE_CPU(CURRENT_STATE, 0); \
- unsigned_##size value = \
- sim_core_read_aligned_##size(cpu, CIA_GET(cpu), read_map, \
- (SIM_ADDR)(addr)); \
- memcpy((unsigned_##size*) (data), (void*) & value, size); \
- } while(0)
-
-#define PKE_MEM_WRITE(me,addr,data,size) \
- do { sim_cpu* cpu = STATE_CPU(CURRENT_STATE, 0); \
- unsigned_##size value; \
- memcpy((void*) & value, (unsigned_##size*)(data), size); \
- sim_core_write_aligned_##size(cpu, CIA_GET(cpu), write_map, \
- (SIM_ADDR)(addr), value); \
- if (indebug ((me)->dev.name)) \
- { \
- int i; \
- unsigned_##size value_te; \
- value_te = H2T_##size(value); \
- if (((me)->fifo_trace_file == NULL ) && \
- ((me)->fifo_trace_file_name != NULL )) \
- sky_open_file (&((me)->fifo_trace_file), \
- (me)->fifo_trace_file_name, \
- (char *) NULL, _IOLBF ); \
- fprintf (((me)->fifo_trace_file != NULL) ? \
- (me)->fifo_trace_file : stdout, \
- "# Write %2d bytes to ", size); \
- fprintf (((me)->fifo_trace_file != NULL) ? \
- (me)->fifo_trace_file : stdout, \
- "0x%08lx: ", (unsigned long)(addr)); \
- for(i=0; i<size; i++) \
- fprintf (((me)->fifo_trace_file != NULL) ? \
- (me)->fifo_trace_file : stdout, \
- " %02x", ((unsigned_1*)(& value_te))[i]); \
- fprintf (((me)->fifo_trace_file != NULL) ? \
- (me)->fifo_trace_file : stdout, \
- "\n"); \
- } \
- } while(0)
-
-
-#endif /* H_PKE_H */
projects / external / binutils.git / commitdiff