usb: phy: remove CONFIG_USB_OTG_UTILS

there are no more users of CONFIG_USB_OTG_UTILS
left in tree, we can remove it just fine.

[ kishon@ti.com : fixed a linking error due
	to original patch forgetting to change
	drivers/usb/Makefile ]

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 9e00c38..ffe02fb 100644 (file)
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -254,7 +254,7 @@ config BATTERY_RX51
 
 config CHARGER_ISP1704
        tristate "ISP1704 USB Charger Detection"
-       depends on USB_OTG_UTILS
+       depends on USB_PHY
        help
          Say Y to enable support for USB Charger Detection with
          ISP1707/ISP1704 USB transceivers.

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 860306b..c41feba 100644 (file)
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -44,7 +44,7 @@ obj-$(CONFIG_USB_MICROTEK)    += image/
 obj-$(CONFIG_USB_SERIAL)       += serial/
 
 obj-$(CONFIG_USB)              += misc/
-obj-$(CONFIG_USB_OTG_UTILS)    += phy/
+obj-$(CONFIG_USB_PHY)          += phy/
 obj-$(CONFIG_EARLY_PRINTK_DBGP)        += early/
 
 obj-$(CONFIG_USB_ATM)          += atm/

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 68e9a2c..ea5ee9c 100644 (file)
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -1,7 +1,6 @@
 config USB_DWC3
        tristate "DesignWare USB3 DRD Core Support"
        depends on (USB || USB_GADGET) && GENERIC_HARDIRQS
-       select USB_OTG_UTILS
        select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
        help
          Say Y or M here if your system has a Dual Role SuperSpeed

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 50586ff..7ad108a 100644 (file)
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -195,7 +195,6 @@ config USB_OMAP
        tristate "OMAP USB Device Controller"
        depends on ARCH_OMAP1
        select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
-       select USB_OTG_UTILS if ARCH_OMAP
        help
           Many Texas Instruments OMAP processors have flexible full
           speed USB device controllers, with support for up to 30
@@ -210,7 +209,6 @@ config USB_OMAP
 config USB_PXA25X
        tristate "PXA 25x or IXP 4xx"
        depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
-       select USB_OTG_UTILS
        help
           Intel's PXA 25x series XScale ARM-5TE processors include
           an integrated full speed USB 1.1 device controller.  The
@@ -258,7 +256,6 @@ config USB_RENESAS_USBHS_UDC
 
 config USB_PXA27X
        tristate "PXA 27x"
-       select USB_OTG_UTILS
        help
           Intel's PXA 27x series XScale ARM v5TE processors include
           an integrated full speed USB 1.1 device controller.

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index c59a112..ba1347c 100644 (file)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -300,7 +300,6 @@ config USB_OHCI_HCD
        tristate "OHCI HCD support"
        depends on USB && USB_ARCH_HAS_OHCI
        select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
-       select USB_OTG_UTILS if ARCH_OMAP
        depends on USB_ISP1301 || !ARCH_LPC32XX
        ---help---
          The Open Host Controller Interface (OHCI) is a standard for accessing

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index d38cf98..47442d3 100644 (file)
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -7,7 +7,6 @@
 config USB_MUSB_HDRC
        tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
        depends on USB && USB_GADGET
-       select USB_OTG_UTILS
        help
          Say Y here if your system has a dual role high speed USB
          controller based on the Mentor Graphics silicon IP.  Then

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 832cd69..97de6de 100644 (file)
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -3,7 +3,6 @@
 #
 menuconfig USB_PHY
        tristate "USB Physical Layer drivers"
-       select USB_OTG_UTILS
        help
          USB controllers (those which are host, device or DRD) need a
          device to handle the physical layer signalling, commonly called
@@ -13,19 +12,12 @@ menuconfig USB_PHY
 
 if USB_PHY
 
-config USB_OTG_UTILS
-       bool
-       help
-         Select this to make sure the build includes objects from
-         the OTG infrastructure directory.
-
 #
 # USB Transceiver Drivers
 #
 config AB8500_USB
        tristate "AB8500 USB Transceiver Driver"
        depends on AB8500_CORE
-       select USB_OTG_UTILS
        help
          Enable this to support the USB OTG transceiver in AB8500 chip.
          This transceiver supports high and full speed devices plus,
@@ -35,14 +27,12 @@ config FSL_USB2_OTG
        bool "Freescale USB OTG Transceiver Driver"
        depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
        select USB_OTG
-       select USB_OTG_UTILS
        help
          Enable this to support Freescale USB OTG transceiver.
 
 config ISP1301_OMAP
        tristate "Philips ISP1301 with OMAP OTG"
        depends on I2C && ARCH_OMAP_OTG
-       select USB_OTG_UTILS
        help
          If you say yes here you get support for the Philips ISP1301
          USB-On-The-Go transceiver working with the OMAP OTG controller.
@@ -56,14 +46,12 @@ config ISP1301_OMAP
 config MV_U3D_PHY
        bool "Marvell USB 3.0 PHY controller Driver"
        depends on USB_MV_U3D
-       select USB_OTG_UTILS
        help
          Enable this to support Marvell USB 3.0 phy controller for Marvell
          SoC.
 
 config NOP_USB_XCEIV
        tristate "NOP USB Transceiver Driver"
-       select USB_OTG_UTILS
        help
          This driver is to be used by all the usb transceiver which are either
          built-in with usb ip or which are autonomous and doesn't require any
@@ -81,7 +69,6 @@ config OMAP_CONTROL_USB
 config OMAP_USB2
        tristate "OMAP USB2 PHY Driver"
        depends on ARCH_OMAP2PLUS
-       select USB_OTG_UTILS
        select OMAP_CONTROL_USB
        help
          Enable this to support the transceiver that is part of SOC. This
@@ -91,7 +78,6 @@ config OMAP_USB2
 
 config OMAP_USB3
        tristate "OMAP USB3 PHY Driver"
-       select USB_OTG_UTILS
        select OMAP_CONTROL_USB
        help
          Enable this to support the USB3 PHY that is part of SOC. This
@@ -102,7 +88,6 @@ config OMAP_USB3
 config SAMSUNG_USBPHY
        bool "Samsung USB PHY controller Driver"
        depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS
-       select USB_OTG_UTILS
        help
          Enable this to support Samsung USB phy controller for samsung
          SoCs.
@@ -110,7 +95,6 @@ config SAMSUNG_USBPHY
 config TWL4030_USB
        tristate "TWL4030 USB Transceiver Driver"
        depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
-       select USB_OTG_UTILS
        help
          Enable this to support the USB OTG transceiver on TWL4030
          family chips (including the TWL5030 and TPS659x0 devices).
@@ -120,7 +104,6 @@ config TWL4030_USB
 config TWL6030_USB
        tristate "TWL6030 USB Transceiver Driver"
        depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
-       select USB_OTG_UTILS
        help
          Enable this to support the USB OTG transceiver on TWL6030
          family chips. This TWL6030 transceiver has the VBUS and ID GND
@@ -132,7 +115,6 @@ config TWL6030_USB
 config USB_GPIO_VBUS
        tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
        depends on GENERIC_GPIO
-       select USB_OTG_UTILS
        help
          Provides simple GPIO VBUS sensing for controllers with an
          internal transceiver via the usb_phy interface, and
@@ -154,7 +136,6 @@ config USB_ISP1301
 config USB_MSM_OTG
        tristate "OTG support for Qualcomm on-chip USB controller"
        depends on (USB || USB_GADGET) && ARCH_MSM
-       select USB_OTG_UTILS
        help
          Enable this to support the USB OTG transceiver on MSM chips. It
          handles PHY initialization, clock management, and workarounds
@@ -168,7 +149,6 @@ config USB_MV_OTG
        tristate "Marvell USB OTG support"
        depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
        select USB_OTG
-       select USB_OTG_UTILS
        help
          Say Y here if you want to build Marvell USB OTG transciever
          driver in kernel (including PXA and MMP series). This driver
@@ -180,7 +160,6 @@ config USB_MXS_PHY
        tristate "Freescale MXS USB PHY support"
        depends on ARCH_MXC || ARCH_MXS
        select STMP_DEVICE
-       select USB_OTG_UTILS
        help
          Enable this to support the Freescale MXS USB PHY.
 
@@ -189,7 +168,6 @@ config USB_MXS_PHY
 config USB_RCAR_PHY
        tristate "Renesas R-Car USB phy support"
        depends on USB || USB_GADGET
-       select USB_OTG_UTILS
        help
          Say Y here to add support for the Renesas R-Car USB phy driver.
          This chip is typically used as USB phy for USB host, gadget.
@@ -201,7 +179,6 @@ config USB_RCAR_PHY
 config USB_ULPI
        bool "Generic ULPI Transceiver Driver"
        depends on ARM
-       select USB_OTG_UTILS
        help
          Enable this to support ULPI connected USB OTG transceivers which
          are likely found on embedded boards.