tty: serial: samsung_tty: Add support for Apple UARTs
authorHector Martin <marcan@marcan.st>
Thu, 4 Mar 2021 21:38:59 +0000 (06:38 +0900)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 10 Mar 2021 08:34:10 +0000 (09:34 +0100)
Apple SoCs are a distant descendant of Samsung designs and use yet
another variant of their UART style, with different interrupt handling.

In particular, this variant has the following differences with existing
ones:

* It includes a built-in interrupt controller with different registers,
  using only a single platform IRQ

* Internal interrupt sources are treated as edge-triggered, even though
  the IRQ output is level-triggered. This chiefly affects the TX IRQ
  path: the driver can no longer rely on the TX buffer empty IRQ
  immediately firing after TX is enabled, but instead must prime the
  FIFO with data directly.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210304213902.83903-25-marcan@marcan.st
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/Kconfig
drivers/tty/serial/samsung_tty.c
include/linux/serial_s3c.h

index fb9731d..e6f55c2 100644 (file)
@@ -236,7 +236,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
        tristate "Samsung SoC serial support"
-       depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
+       depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || COMPILE_TEST
        select SERIAL_CORE
        help
          Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
index 26cb059..5ef37c4 100644 (file)
@@ -59,6 +59,7 @@
 enum s3c24xx_port_type {
        TYPE_S3C24XX,
        TYPE_S3C6400,
+       TYPE_APPLE_S5L,
 };
 
 struct s3c24xx_uart_info {
@@ -151,6 +152,8 @@ struct s3c24xx_uart_port {
 #endif
 };
 
+static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport);
+
 /* conversion functions */
 
 #define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
@@ -290,6 +293,9 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
        case TYPE_S3C6400:
                s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
                break;
+       case TYPE_APPLE_S5L:
+               s3c24xx_clear_bit(port, APPLE_S5L_UCON_TXTHRESH_ENA, S3C2410_UCON);
+               break;
        default:
                disable_irq_nosync(ourport->tx_irq);
                break;
@@ -358,6 +364,9 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
        case TYPE_S3C6400:
                s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
                break;
+       case TYPE_APPLE_S5L:
+               WARN_ON(1); // No DMA
+               break;
        default:
                disable_irq_nosync(ourport->tx_irq);
                break;
@@ -396,12 +405,23 @@ static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
                s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD,
                                  S3C64XX_UINTM);
                break;
+       case TYPE_APPLE_S5L:
+               ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK;
+               wr_regl(port, S3C2410_UCON, ucon);
+               break;
        default:
                enable_irq(ourport->tx_irq);
                break;
        }
 
        ourport->tx_mode = S3C24XX_TX_PIO;
+
+       /*
+        * The Apple version only has edge triggered TX IRQs, so we need
+        * to kick off the process by sending some characters here.
+        */
+       if (ourport->info->type == TYPE_APPLE_S5L)
+               s3c24xx_serial_tx_chars(ourport);
 }
 
 static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport)
@@ -527,6 +547,10 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port)
                        s3c24xx_set_bit(port, S3C64XX_UINTM_RXD,
                                        S3C64XX_UINTM);
                        break;
+               case TYPE_APPLE_S5L:
+                       s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON);
+                       s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON);
+                       break;
                default:
                        disable_irq_nosync(ourport->rx_irq);
                        break;
@@ -664,14 +688,18 @@ static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
 
        /* set Rx mode to DMA mode */
        ucon = rd_regl(port, S3C2410_UCON);
-       ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK |
-                       S3C64XX_UCON_EMPTYINT_EN |
-                       S3C64XX_UCON_DMASUS_EN |
-                       S3C64XX_UCON_TIMEOUT_EN |
-                       S3C64XX_UCON_RXMODE_MASK);
-       ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
-                       S3C64XX_UCON_TIMEOUT_EN |
-                       S3C64XX_UCON_RXMODE_CPU;
+       ucon &= ~S3C64XX_UCON_RXMODE_MASK;
+       ucon |= S3C64XX_UCON_RXMODE_CPU;
+
+       /* Apple types use these bits for IRQ masks */
+       if (ourport->info->type != TYPE_APPLE_S5L) {
+               ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK |
+                               S3C64XX_UCON_EMPTYINT_EN |
+                               S3C64XX_UCON_DMASUS_EN |
+                               S3C64XX_UCON_TIMEOUT_EN);
+               ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
+                               S3C64XX_UCON_TIMEOUT_EN;
+       }
        wr_regl(port, S3C2410_UCON, ucon);
 
        ourport->rx_mode = S3C24XX_RX_PIO;
@@ -935,6 +963,27 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
        return ret;
 }
 
+/* interrupt handler for Apple SoC's.*/
+static irqreturn_t apple_serial_handle_irq(int irq, void *id)
+{
+       struct s3c24xx_uart_port *ourport = id;
+       struct uart_port *port = &ourport->port;
+       unsigned int pend = rd_regl(port, S3C2410_UTRSTAT);
+       irqreturn_t ret = IRQ_NONE;
+
+       if (pend & (APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO)) {
+               wr_regl(port, S3C2410_UTRSTAT,
+                       APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO);
+               ret = s3c24xx_serial_rx_irq(irq, id);
+       }
+       if (pend & APPLE_S5L_UTRSTAT_TXTHRESH) {
+               wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_TXTHRESH);
+               ret = s3c24xx_serial_tx_irq(irq, id);
+       }
+
+       return ret;
+}
+
 static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
 {
        struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
@@ -1154,6 +1203,32 @@ static void s3c64xx_serial_shutdown(struct uart_port *port)
        ourport->tx_in_progress = 0;
 }
 
+static void apple_s5l_serial_shutdown(struct uart_port *port)
+{
+       struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+       unsigned int ucon;
+
+       ucon = rd_regl(port, S3C2410_UCON);
+       ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
+                 APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
+                 APPLE_S5L_UCON_RXTO_ENA_MSK);
+       wr_regl(port, S3C2410_UCON, ucon);
+
+       wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
+
+       free_irq(port->irq, ourport);
+
+       ourport->tx_enabled = 0;
+       ourport->tx_mode = 0;
+       ourport->rx_enabled = 0;
+
+       if (ourport->dma)
+               s3c24xx_serial_release_dma(ourport);
+
+       ourport->tx_in_progress = 0;
+}
+
 static int s3c24xx_serial_startup(struct uart_port *port)
 {
        struct s3c24xx_uart_port *ourport = to_ourport(port);
@@ -1241,6 +1316,45 @@ static int s3c64xx_serial_startup(struct uart_port *port)
        return ret;
 }
 
+static int apple_s5l_serial_startup(struct uart_port *port)
+{
+       struct s3c24xx_uart_port *ourport = to_ourport(port);
+       unsigned long flags;
+       unsigned int ufcon;
+       int ret;
+
+       wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
+
+       ret = request_irq(port->irq, apple_serial_handle_irq, 0,
+                         s3c24xx_serial_portname(port), ourport);
+       if (ret) {
+               dev_err(port->dev, "cannot get irq %d\n", port->irq);
+               return ret;
+       }
+
+       /* For compatibility with s3c24xx Soc's */
+       ourport->rx_enabled = 1;
+       ourport->tx_enabled = 0;
+
+       spin_lock_irqsave(&port->lock, flags);
+
+       ufcon = rd_regl(port, S3C2410_UFCON);
+       ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
+       if (!uart_console(port))
+               ufcon |= S3C2410_UFCON_RESETTX;
+       wr_regl(port, S3C2410_UFCON, ufcon);
+
+       enable_rx_pio(ourport);
+
+       spin_unlock_irqrestore(&port->lock, flags);
+
+       /* Enable Rx Interrupt */
+       s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON);
+       s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON);
+
+       return ret;
+}
+
 /* power power management control */
 
 static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
@@ -1568,6 +1682,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
                return "S3C24XX";
        case TYPE_S3C6400:
                return "S3C6400/10";
+       case TYPE_APPLE_S5L:
+               return "APPLE S5L";
        default:
                return NULL;
        }
@@ -1659,6 +1775,27 @@ static const struct uart_ops s3c64xx_serial_ops = {
 #endif
 };
 
+static const struct uart_ops apple_s5l_serial_ops = {
+       .pm             = s3c24xx_serial_pm,
+       .tx_empty       = s3c24xx_serial_tx_empty,
+       .get_mctrl      = s3c24xx_serial_get_mctrl,
+       .set_mctrl      = s3c24xx_serial_set_mctrl,
+       .stop_tx        = s3c24xx_serial_stop_tx,
+       .start_tx       = s3c24xx_serial_start_tx,
+       .stop_rx        = s3c24xx_serial_stop_rx,
+       .break_ctl      = s3c24xx_serial_break_ctl,
+       .startup        = apple_s5l_serial_startup,
+       .shutdown       = apple_s5l_serial_shutdown,
+       .set_termios    = s3c24xx_serial_set_termios,
+       .type           = s3c24xx_serial_type,
+       .config_port    = s3c24xx_serial_config_port,
+       .verify_port    = s3c24xx_serial_verify_port,
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
+       .poll_get_char = s3c24xx_serial_get_poll_char,
+       .poll_put_char = s3c24xx_serial_put_poll_char,
+#endif
+};
+
 static struct uart_driver s3c24xx_uart_drv = {
        .owner          = THIS_MODULE,
        .driver_name    = "s3c2410_serial",
@@ -1975,6 +2112,18 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
                wr_regl(port, S3C64XX_UINTP, 0xf);
                wr_regl(port, S3C64XX_UINTSP, 0xf);
                break;
+       case TYPE_APPLE_S5L: {
+               unsigned int ucon;
+
+               ucon = rd_regl(port, S3C2410_UCON);
+               ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
+                       APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
+                       APPLE_S5L_UCON_RXTO_ENA_MSK);
+               wr_regl(port, S3C2410_UCON, ucon);
+
+               wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
+               break;
+       }
        default:
                break;
        }
@@ -2054,6 +2203,9 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
        case TYPE_S3C6400:
                ourport->port.ops = &s3c64xx_serial_ops;
                break;
+       case TYPE_APPLE_S5L:
+               ourport->port.ops = &apple_s5l_serial_ops;
+               break;
        }
 
        if (np) {
@@ -2196,6 +2348,43 @@ static int s3c24xx_serial_resume_noirq(struct device *dev)
                        clk_disable_unprepare(ourport->clk);
                        break;
                }
+               case TYPE_APPLE_S5L: {
+                       unsigned int ucon;
+                       int ret;
+
+                       ret = clk_prepare_enable(ourport->clk);
+                       if (ret) {
+                               dev_err(dev, "clk_enable clk failed: %d\n", ret);
+                               return ret;
+                       }
+                       if (!IS_ERR(ourport->baudclk)) {
+                               ret = clk_prepare_enable(ourport->baudclk);
+                               if (ret) {
+                                       dev_err(dev, "clk_enable baudclk failed: %d\n", ret);
+                                       clk_disable_unprepare(ourport->clk);
+                                       return ret;
+                               }
+                       }
+
+                       ucon = rd_regl(port, S3C2410_UCON);
+
+                       ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
+                                 APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
+                                 APPLE_S5L_UCON_RXTO_ENA_MSK);
+
+                       if (ourport->tx_enabled)
+                               ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK;
+                       if (ourport->rx_enabled)
+                               ucon |= APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
+                                       APPLE_S5L_UCON_RXTO_ENA_MSK;
+
+                       wr_regl(port, S3C2410_UCON, ucon);
+
+                       if (!IS_ERR(ourport->baudclk))
+                               clk_disable_unprepare(ourport->baudclk);
+                       clk_disable_unprepare(ourport->clk);
+                       break;
+               }
                default:
                        break;
                }
@@ -2605,6 +2794,34 @@ static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
 #define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL
 #endif
 
+#ifdef CONFIG_ARCH_APPLE
+static struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
+       .info = &(struct s3c24xx_uart_info) {
+               .name           = "Apple S5L UART",
+               .type           = TYPE_APPLE_S5L,
+               .port_type      = PORT_8250,
+               .fifosize       = 16,
+               .rx_fifomask    = S3C2410_UFSTAT_RXMASK,
+               .rx_fifoshift   = S3C2410_UFSTAT_RXSHIFT,
+               .rx_fifofull    = S3C2410_UFSTAT_RXFULL,
+               .tx_fifofull    = S3C2410_UFSTAT_TXFULL,
+               .tx_fifomask    = S3C2410_UFSTAT_TXMASK,
+               .tx_fifoshift   = S3C2410_UFSTAT_TXSHIFT,
+               .def_clk_sel    = S3C2410_UCON_CLKSEL0,
+               .num_clks       = 1,
+               .clksel_mask    = 0,
+               .clksel_shift   = 0,
+       },
+       .def_cfg = &(struct s3c2410_uartcfg) {
+               .ucon           = APPLE_S5L_UCON_DEFAULT,
+               .ufcon          = S3C2410_UFCON_DEFAULT,
+       },
+};
+#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)&s5l_serial_drv_data)
+#else
+#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
+#endif
+
 static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
        {
                .name           = "s3c2410-uart",
@@ -2627,6 +2844,9 @@ static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
        }, {
                .name           = "exynos5433-uart",
                .driver_data    = EXYNOS5433_SERIAL_DRV_DATA,
+       }, {
+               .name           = "s5l-uart",
+               .driver_data    = S5L_SERIAL_DRV_DATA,
        },
        { },
 };
@@ -2648,6 +2868,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = {
                .data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
        { .compatible = "samsung,exynos5433-uart",
                .data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
+       { .compatible = "apple,s5l-uart",
+               .data = (void *)S5L_SERIAL_DRV_DATA },
        {},
 };
 MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
index ca2c539..f6c3323 100644 (file)
                                 S5PV210_UFCON_TXTRIG4 |        \
                                 S5PV210_UFCON_RXTRIG4)
 
+#define APPLE_S5L_UCON_RXTO_ENA                9
+#define APPLE_S5L_UCON_RXTHRESH_ENA    12
+#define APPLE_S5L_UCON_TXTHRESH_ENA    13
+#define APPLE_S5L_UCON_RXTO_ENA_MSK    (1 << APPLE_S5L_UCON_RXTO_ENA)
+#define APPLE_S5L_UCON_RXTHRESH_ENA_MSK        (1 << APPLE_S5L_UCON_RXTHRESH_ENA)
+#define APPLE_S5L_UCON_TXTHRESH_ENA_MSK        (1 << APPLE_S5L_UCON_TXTHRESH_ENA)
+
+#define APPLE_S5L_UCON_DEFAULT         (S3C2410_UCON_TXIRQMODE | \
+                                        S3C2410_UCON_RXIRQMODE | \
+                                        S3C2410_UCON_RXFIFO_TOI)
+
+#define APPLE_S5L_UTRSTAT_RXTHRESH     (1<<4)
+#define APPLE_S5L_UTRSTAT_TXTHRESH     (1<<5)
+#define APPLE_S5L_UTRSTAT_RXTO         (1<<9)
+#define APPLE_S5L_UTRSTAT_ALL_FLAGS    (0x3f0)
+
 #ifndef __ASSEMBLY__
 
 #include <linux/serial_core.h>