ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build
authorThomas Abraham <thomas.abraham@linaro.org>
Mon, 24 Oct 2011 11:57:43 +0000 (13:57 +0200)
committerKukjin Kim <kgene.kim@samsung.com>
Fri, 23 Dec 2011 01:07:06 +0000 (10:07 +0900)
The pl330 device instances and associated platform data is required only
for non-device-tree builds. With device tree enabled, the data about the
platform is obtained from the device tree. For images that include both
dt and non-dt platforms, an addditional check is added to ensure that
static amba device registrations is applicable to only non-dt platforms.

Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
arch/arm/mach-exynos/Kconfig
arch/arm/mach-exynos/Makefile
arch/arm/mach-exynos/dma.c

index 724ec0f..68e4ab0 100644 (file)
@@ -57,6 +57,11 @@ config EXYNOS4_MCT
        help
          Use MCT (Multi Core Timer) as kernel timers
 
+config EXYNOS4_DEV_DMA
+       bool
+       help
+         Compile in amba device definitions for DMA controller
+
 config EXYNOS4_DEV_AHCI
        bool
        help
@@ -177,6 +182,7 @@ config MACH_SMDKV310
        select SAMSUNG_DEV_BACKLIGHT
        select EXYNOS4_DEV_AHCI
        select SAMSUNG_DEV_KEYPAD
+       select EXYNOS4_DEV_DMA
        select EXYNOS4_DEV_PD
        select SAMSUNG_DEV_PWM
        select EXYNOS4_DEV_SYSMMU
@@ -197,6 +203,7 @@ config MACH_ARMLEX4210
        select S3C_DEV_HSMMC2
        select S3C_DEV_HSMMC3
        select EXYNOS4_DEV_AHCI
+       select EXYNOS4_DEV_DMA
        select EXYNOS4_DEV_SYSMMU
        select EXYNOS4_SETUP_SDHCI
        help
@@ -222,6 +229,7 @@ config MACH_UNIVERSAL_C210
        select S5P_DEV_MFC
        select S5P_DEV_ONENAND
        select S5P_DEV_TV
+       select EXYNOS4_DEV_DMA
        select EXYNOS4_DEV_PD
        select EXYNOS4_SETUP_FIMD0
        select EXYNOS4_SETUP_I2C1
@@ -255,6 +263,7 @@ config MACH_NURI
        select S5P_DEV_MFC
        select S5P_DEV_USB_EHCI
        select S5P_SETUP_MIPIPHY
+       select EXYNOS4_DEV_DMA
        select EXYNOS4_DEV_PD
        select EXYNOS4_SETUP_FIMC
        select EXYNOS4_SETUP_FIMD0
@@ -287,6 +296,7 @@ config MACH_ORIGEN
        select S5P_DEV_USB_EHCI
        select SAMSUNG_DEV_BACKLIGHT
        select SAMSUNG_DEV_PWM
+       select EXYNOS4_DEV_DMA
        select EXYNOS4_DEV_PD
        select EXYNOS4_SETUP_FIMD0
        select EXYNOS4_SETUP_SDHCI
index 59069a3..cb6fb0e 100644 (file)
@@ -13,7 +13,7 @@ obj-                          :=
 # Core support for EXYNOS4 system
 
 obj-$(CONFIG_ARCH_EXYNOS4)     += cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
-obj-$(CONFIG_ARCH_EXYNOS4)     += irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4)     += irq-eint.o pmu.o
 obj-$(CONFIG_CPU_EXYNOS4210)   += clock-exynos4210.o
 obj-$(CONFIG_SOC_EXYNOS4212)   += clock-exynos4212.o
 obj-$(CONFIG_PM)               += pm.o
@@ -44,6 +44,7 @@ obj-$(CONFIG_EXYNOS4_DEV_AHCI)                += dev-ahci.o
 obj-$(CONFIG_EXYNOS4_DEV_PD)           += dev-pd.o
 obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)       += dev-sysmmu.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)                += dev-dwmci.o
+obj-$(CONFIG_EXYNOS4_DEV_DMA)          += dma.o
 
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)       += setup-fimc.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMD0)      += setup-fimd0.o
index 141093d..b10fcd2 100644 (file)
@@ -24,6 +24,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl330.h>
+#include <linux/of.h>
 
 #include <asm/irq.h>
 #include <plat/devs.h>
@@ -140,6 +141,9 @@ struct amba_device exynos4_device_pdma1 = {
 
 static int __init exynos4_dma_init(void)
 {
+       if (of_have_populated_dt())
+               return 0;
+
        dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
        dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
        amba_device_register(&exynos4_device_pdma0, &iomem_resource);