ARM64: dts: odroid-c2: Add HDMI and CEC Nodes

Now the VPU Power Domain has been fixed while boothing from Mainline U-Boot,
VPU and HDMI nodes can finally be added to the Odroid-C2 DTS.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index f8d2214..d6d3af5 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -135,6 +135,24 @@
                compatible = "mmc-pwrseq-emmc";
                reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
        };
+
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_connector_in: endpoint {
+                               remote-endpoint = <&hdmi_tx_tmds_out>;
+                       };
+               };
+       };
+};
+
+&cec_AO {
+       status = "okay";
+       pinctrl-0 = <&ao_cec_pins>;
+       pinctrl-names = "default";
+       hdmi-phandle = <&hdmi_tx>;
 };
 
 &ethmac {
@@ -179,6 +197,18 @@
        };
 };
 
+&hdmi_tx {
+       status = "okay";
+       pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+       pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+       hdmi_tx_tmds_out: endpoint {
+               remote-endpoint = <&hdmi_connector_in>;
+       };
+};
+
 &i2c_A {
        status = "okay";
        pinctrl-0 = <&i2c_a_pins>;