/* The Intel SPEC CTRL MSR base value cache */
extern u64 x86_spec_ctrl_base;
+extern u64 x86_spec_ctrl_current;
extern void write_spec_ctrl_current(u64 val, bool force);
extern u64 spec_ctrl_current(void);
#endif
}
+/*
+ * NOTE: For VMX, this function is not called in the vmexit path.
+ * It uses vmx_spec_ctrl_restore_host() instead.
+ */
void
x86_virt_spec_ctrl(u64 guest_spec_ctrl, u64 guest_virt_spec_ctrl, bool setguest)
{
#define __KVM_X86_VMX_RUN_FLAGS_H
#define VMX_RUN_VMRESUME (1 << 0)
+#define VMX_RUN_SAVE_SPEC_CTRL (1 << 1)
#endif /* __KVM_X86_VMX_RUN_FLAGS_H */
/**
* __vmx_vcpu_run - Run a vCPU via a transition to VMX guest mode
- * @vmx: struct vcpu_vmx * (forwarded to vmx_update_host_rsp)
+ * @vmx: struct vcpu_vmx *
* @regs: unsigned long * (to guest registers)
- * @flags: VMX_RUN_VMRESUME: use VMRESUME instead of VMLAUNCH
+ * @flags: VMX_RUN_VMRESUME: use VMRESUME instead of VMLAUNCH
+ * VMX_RUN_SAVE_SPEC_CTRL: save guest SPEC_CTRL into vmx->spec_ctrl
*
* Returns:
* 0 on VM-Exit, 1 on VM-Fail
#endif
push %_ASM_BX
+ /* Save @vmx for SPEC_CTRL handling */
+ push %_ASM_ARG1
+
+ /* Save @flags for SPEC_CTRL handling */
+ push %_ASM_ARG3
+
/*
* Save @regs, _ASM_ARG2 may be modified by vmx_update_host_rsp() and
* @regs is needed after VM-Exit to save the guest's register values.
mov %r15, VCPU_R15(%_ASM_AX)
#endif
- /* IMPORTANT: RSB must be stuffed before the first return. */
- FILL_RETURN_BUFFER %_ASM_BX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE
-
- /* Clear RAX to indicate VM-Exit (as opposed to VM-Fail). */
- xor %eax, %eax
+ /* Clear return value to indicate VM-Exit (as opposed to VM-Fail). */
+ xor %ebx, %ebx
.Lclear_regs:
/*
- * Clear all general purpose registers except RSP and RAX to prevent
+ * Clear all general purpose registers except RSP and RBX to prevent
* speculative use of the guest's values, even those that are reloaded
* via the stack. In theory, an L1 cache miss when restoring registers
* could lead to speculative execution with the guest's values.
* Zeroing XORs are dirt cheap, i.e. the extra paranoia is essentially
* free. RSP and RAX are exempt as RSP is restored by hardware during
- * VM-Exit and RAX is explicitly loaded with 0 or 1 to return VM-Fail.
+ * VM-Exit and RBX is explicitly loaded with 0 or 1 to hold the return
+ * value.
*/
+ xor %eax, %eax
xor %ecx, %ecx
xor %edx, %edx
- xor %ebx, %ebx
xor %ebp, %ebp
xor %esi, %esi
xor %edi, %edi
/* "POP" @regs. */
add $WORD_SIZE, %_ASM_SP
+ /*
+ * IMPORTANT: RSB filling and SPEC_CTRL handling must be done before
+ * the first unbalanced RET after vmexit!
+ *
+ * For retpoline, RSB filling is needed to prevent poisoned RSB entries
+ * and (in some cases) RSB underflow.
+ *
+ * eIBRS has its own protection against poisoned RSB, so it doesn't
+ * need the RSB filling sequence. But it does need to be enabled
+ * before the first unbalanced RET.
+ */
+
+ FILL_RETURN_BUFFER %_ASM_CX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE
+
+ pop %_ASM_ARG2 /* @flags */
+ pop %_ASM_ARG1 /* @vmx */
+
+ call vmx_spec_ctrl_restore_host
+
+ /* Put return value in AX */
+ mov %_ASM_BX, %_ASM_AX
+
pop %_ASM_BX
#ifdef CONFIG_X86_64
pop %r12
ud2
.Lvmfail:
/* VM-Fail: set return value to 1 */
- mov $1, %eax
+ mov $1, %_ASM_BX
jmp .Lclear_regs
SYM_FUNC_END(__vmx_vcpu_run)
if (vmx->loaded_vmcs->launched)
flags |= VMX_RUN_VMRESUME;
+ /*
+ * If writes to the SPEC_CTRL MSR aren't intercepted, the guest is free
+ * to change it directly without causing a vmexit. In that case read
+ * it after vmexit and store it in vmx->spec_ctrl.
+ */
+ if (unlikely(!msr_write_intercepted(vmx, MSR_IA32_SPEC_CTRL)))
+ flags |= VMX_RUN_SAVE_SPEC_CTRL;
+
return flags;
}
}
}
+void noinstr vmx_spec_ctrl_restore_host(struct vcpu_vmx *vmx,
+ unsigned int flags)
+{
+ u64 hostval = this_cpu_read(x86_spec_ctrl_current);
+
+ if (!cpu_feature_enabled(X86_FEATURE_MSR_SPEC_CTRL))
+ return;
+
+ if (flags & VMX_RUN_SAVE_SPEC_CTRL)
+ vmx->spec_ctrl = __rdmsr(MSR_IA32_SPEC_CTRL);
+
+ /*
+ * If the guest/host SPEC_CTRL values differ, restore the host value.
+ */
+ if (vmx->spec_ctrl != hostval)
+ native_wrmsrl(MSR_IA32_SPEC_CTRL, hostval);
+
+ barrier_nospec();
+}
+
static fastpath_t vmx_exit_handlers_fastpath(struct kvm_vcpu *vcpu)
{
switch (to_vmx(vcpu)->exit_reason.basic) {
/* The actual VMENTER/EXIT is in the .noinstr.text section. */
vmx_vcpu_enter_exit(vcpu, vmx, __vmx_vcpu_run_flags(vmx));
- /*
- * We do not use IBRS in the kernel. If this vCPU has used the
- * SPEC_CTRL MSR it may have left it on; save the value and
- * turn it off. This is much more efficient than blindly adding
- * it to the atomic save/restore list. Especially as the former
- * (Saving guest MSRs on vmexit) doesn't even exist in KVM.
- *
- * For non-nested case:
- * If the L01 MSR bitmap does not intercept the MSR, then we need to
- * save it.
- *
- * For nested case:
- * If the L02 MSR bitmap does not intercept the MSR, then we need to
- * save it.
- */
- if (unlikely(!msr_write_intercepted(vmx, MSR_IA32_SPEC_CTRL)))
- vmx->spec_ctrl = native_read_msr(MSR_IA32_SPEC_CTRL);
-
- x86_spec_ctrl_restore_host(vmx->spec_ctrl, 0);
-
/* All fields are clean at this point */
if (static_branch_unlikely(&enable_evmcs)) {
current_evmcs->hv_clean_fields |=
struct vmx_uret_msr *vmx_find_uret_msr(struct vcpu_vmx *vmx, u32 msr);
void pt_update_intercept_for_msr(struct kvm_vcpu *vcpu);
void vmx_update_host_rsp(struct vcpu_vmx *vmx, unsigned long host_rsp);
+void vmx_spec_ctrl_restore_host(struct vcpu_vmx *vmx, unsigned int flags);
unsigned int __vmx_vcpu_run_flags(struct vcpu_vmx *vmx);
bool __vmx_vcpu_run(struct vcpu_vmx *vmx, unsigned long *regs,
unsigned int flags);
projects / platform / kernel / linux-starfive.git / commitdiff