board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL

CONFIG_SPL_NAND_MINIMAL should not be used as it was defined for temporary
review purpose.

So, use CONFIG_SPL_NAND_BOOT config.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>

diff --git a/README b/README
index 895fef3..e58e9c0 100644 (file)
--- a/README
+++ b/README
@@ -3267,6 +3267,9 @@ FIT uImage format:
                Defines the size and behavior of the NAND that SPL uses
                to read U-Boot
 
+               CONFIG_SPL_NAND_BOOT
+               Add support NAND boot
+
                CONFIG_SYS_NAND_U_BOOT_OFFS
                Location in NAND to read U-Boot from
 

diff --git a/board/freescale/bsc9131rdb/tlb.c b/board/freescale/bsc9131rdb/tlb.c
index 669fe8a..c8ecf5d 100644 (file)
--- a/board/freescale/bsc9131rdb/tlb.c
+++ b/board/freescale/bsc9131rdb/tlb.c
@@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
        SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
        SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 10, BOOKE_PAGESZ_4K, 1),

diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c
index 02655e9..07febc2 100644 (file)
--- a/board/freescale/bsc9132qds/tlb.c
+++ b/board/freescale/bsc9132qds/tlb.c
@@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
        SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
        SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 10, BOOKE_PAGESZ_4K, 1),

diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c
index a7af0f6..a3d36b3 100644 (file)
--- a/board/freescale/p1010rdb/tlb.c
+++ b/board/freescale/p1010rdb/tlb.c
@@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
        SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
        SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 10, BOOKE_PAGESZ_4K, 1),

diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 4aed5af..584aba8 100644 (file)
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -29,7 +29,7 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 

diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index f025e31..6170cbc 100644 (file)
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -38,7 +38,7 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index fe5309a..ea5cb65 100644 (file)
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -37,7 +37,7 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"