treewide: typo 'interrrupt' word corrections.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 2ce2fb7..f56b1bd 100644 (file)
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
  * driver register and sr device intializtion API's. Only one call
  * will ultimately succeed.
  *
- * Currently this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrupt handler for a particular SR
  * if smartreflex class driver is already registered and has
  * requested for interrupts and the SR interrupt line in present.
  */

diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index 613070e..f1eebca 100644 (file)
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -77,7 +77,7 @@ static void __init storcenter_setup_arch(void)
 }
 
 /*
- * Interrupt setup and service.  Interrrupts on the turbostation come
+ * Interrupt setup and service.  Interrupts on the turbostation come
  * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
  */
 static void __init storcenter_init_IRQ(void)

diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index c827a60..8d0baec 100644 (file)
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -414,7 +414,7 @@ ks8695_tx_irq(int irq, void *dev_id)
  *    Interrupt Status Register (Offset 0xF208)
  *        Bit29: WAN MAC Receive Status
  *        Bit16: LAN MAC Receive Status
- *    So, this Rx interrrupt enable/status bit number is equal
+ *    So, this Rx interrupt enable/status bit number is equal
  *    as Rx IRQ number.
  */
 static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)

diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 6f0e940..c346e65 100644 (file)
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -858,7 +858,7 @@ static s32 atl1_init_hw(struct atl1_hw *hw)
        atl1_init_flash_opcode(hw);
 
        if (!hw->phy_configured) {
-               /* enable GPHY LinkChange Interrrupt */
+               /* enable GPHY LinkChange Interrupt */
                ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
                if (ret_val)
                        return ret_val;

diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index fc50d42..99d31a7 100644 (file)
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -5617,7 +5617,7 @@ struct l2_fhdr {
 #define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED             (1L<<8)
 #define BNX2_TXP_CPU_STATE_SOFT_HALTED                  (1L<<10)
 #define BNX2_TXP_CPU_STATE_SPAD_UNDERFLOW               (1L<<11)
-#define BNX2_TXP_CPU_STATE_INTERRRUPT                   (1L<<12)
+#define BNX2_TXP_CPU_STATE_INTERRUPT                    (1L<<12)
 #define BNX2_TXP_CPU_STATE_DATA_ACCESS_STALL            (1L<<14)
 #define BNX2_TXP_CPU_STATE_INST_FETCH_STALL             (1L<<15)
 #define BNX2_TXP_CPU_STATE_BLOCKED_READ                         (1L<<31)
@@ -5712,7 +5712,7 @@ struct l2_fhdr {
 #define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED            (1L<<8)
 #define BNX2_TPAT_CPU_STATE_SOFT_HALTED                         (1L<<10)
 #define BNX2_TPAT_CPU_STATE_SPAD_UNDERFLOW              (1L<<11)
-#define BNX2_TPAT_CPU_STATE_INTERRRUPT                  (1L<<12)
+#define BNX2_TPAT_CPU_STATE_INTERRUPT                   (1L<<12)
 #define BNX2_TPAT_CPU_STATE_DATA_ACCESS_STALL           (1L<<14)
 #define BNX2_TPAT_CPU_STATE_INST_FETCH_STALL            (1L<<15)
 #define BNX2_TPAT_CPU_STATE_BLOCKED_READ                (1L<<31)
@@ -5807,7 +5807,7 @@ struct l2_fhdr {
 #define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED             (1L<<8)
 #define BNX2_RXP_CPU_STATE_SOFT_HALTED                  (1L<<10)
 #define BNX2_RXP_CPU_STATE_SPAD_UNDERFLOW               (1L<<11)
-#define BNX2_RXP_CPU_STATE_INTERRRUPT                   (1L<<12)
+#define BNX2_RXP_CPU_STATE_INTERRUPT                    (1L<<12)
 #define BNX2_RXP_CPU_STATE_DATA_ACCESS_STALL            (1L<<14)
 #define BNX2_RXP_CPU_STATE_INST_FETCH_STALL             (1L<<15)
 #define BNX2_RXP_CPU_STATE_BLOCKED_READ                         (1L<<31)
@@ -5953,7 +5953,7 @@ struct l2_fhdr {
 #define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED             (1L<<8)
 #define BNX2_COM_CPU_STATE_SOFT_HALTED                  (1L<<10)
 #define BNX2_COM_CPU_STATE_SPAD_UNDERFLOW               (1L<<11)
-#define BNX2_COM_CPU_STATE_INTERRRUPT                   (1L<<12)
+#define BNX2_COM_CPU_STATE_INTERRUPT                    (1L<<12)
 #define BNX2_COM_CPU_STATE_DATA_ACCESS_STALL            (1L<<14)
 #define BNX2_COM_CPU_STATE_INST_FETCH_STALL             (1L<<15)
 #define BNX2_COM_CPU_STATE_BLOCKED_READ                         (1L<<31)
@@ -6119,7 +6119,7 @@ struct l2_fhdr {
 #define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED              (1L<<8)
 #define BNX2_CP_CPU_STATE_SOFT_HALTED                   (1L<<10)
 #define BNX2_CP_CPU_STATE_SPAD_UNDERFLOW                (1L<<11)
-#define BNX2_CP_CPU_STATE_INTERRRUPT                    (1L<<12)
+#define BNX2_CP_CPU_STATE_INTERRUPT                     (1L<<12)
 #define BNX2_CP_CPU_STATE_DATA_ACCESS_STALL             (1L<<14)
 #define BNX2_CP_CPU_STATE_INST_FETCH_STALL              (1L<<15)
 #define BNX2_CP_CPU_STATE_BLOCKED_READ                  (1L<<31)
@@ -6291,7 +6291,7 @@ struct l2_fhdr {
 #define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED             (1L<<8)
 #define BNX2_MCP_CPU_STATE_SOFT_HALTED                  (1L<<10)
 #define BNX2_MCP_CPU_STATE_SPAD_UNDERFLOW               (1L<<11)
-#define BNX2_MCP_CPU_STATE_INTERRRUPT                   (1L<<12)
+#define BNX2_MCP_CPU_STATE_INTERRUPT                    (1L<<12)
 #define BNX2_MCP_CPU_STATE_DATA_ACCESS_STALL            (1L<<14)
 #define BNX2_MCP_CPU_STATE_INST_FETCH_STALL             (1L<<15)
 #define BNX2_MCP_CPU_STATE_BLOCKED_READ                         (1L<<31)

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 57339da..d7f879d 100644 (file)
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2057,7 +2057,7 @@ static void sky2_hw_down(struct sky2_port *sky2)
 
        sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
 
-       /* Force any delayed status interrrupt and NAPI */
+       /* Force any delayed status interrupt and NAPI */
        sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
        sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
        sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);

diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 5efd578..c1ea65e 100644 (file)
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -488,7 +488,7 @@ static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw)
        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
        struct sk_buff *skb = NULL;
        struct ieee80211_tx_info *info = NULL;
-       int tid; /* should be int */
+       int tid;
 
        if (!rtlpriv->rtlhal.earlymode_enable)
                return;
@@ -1538,7 +1538,7 @@ static int rtl_pci_start(struct ieee80211_hw *hw)
 
        rtl_init_rx_config(hw);
 
-       /*should after adapter start and interrupt enable. */
+       /*should be after adapter start and interrupt enable. */
        set_hal_start(rtlhal);
 
        RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
@@ -1559,7 +1559,7 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
        u8 RFInProgressTimeOut = 0;
 
        /*
-        *should before disable interrrupt&adapter
+        *should be before disable interrupt&adapter
         *and will do it immediately.
         */
        set_hal_stop(rtlhal);

diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index a764bf9..fbd9261 100644 (file)
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -23,7 +23,7 @@
  *    1 word. If SPI master controller doesn't support sclk frequency change,
  *    then the char need be sent out one by one with some delay
  *
- * 2. Currently only RX available interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX available interrupt is used, no need for waiting TXE
  *    interrupt for a low speed UART device
  */
 

diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index a06e2c2..ff4d40d 100644 (file)
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -2969,7 +2969,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
                handle_port_change(dev);
        }
 
-       /* suspend interrrupt */
+       /* suspend interrupt */
        if (irq_sts & STS_SLI) {
                dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
                handle_bus_suspend(dev);

diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3dd40b4..a218a4d 100644 (file)
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2481,7 +2481,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
        mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED);
 
        /* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set.
-        * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and
+        * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and
         * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT
         * only indicates a change in the reset state).
         */

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index b67a062..95a67fe 100644 (file)
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -704,7 +704,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
         * most these gadgets, end of is signified either by a short packet,
         * or filling the last byte of the buffer.  (Sending extra data in
         * that last pckate should trigger an overflow fault.)  But in mode 1,
-        * we don't get DMA completion interrrupt for short packets.
+        * we don't get DMA completion interrupt for short packets.
         *
         * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
         * to get endpoint interrupt on every DMA req, but that didn't seem