--- /dev/null
+/*
+ * bluetooth-frwk
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+#ifndef _BLUETOOTH_API_H_
+#define _BLUETOOTH_API_H_
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <glib.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/**
+ * @defgroup BLUETOOTHFW BluetoothFW
+ *
+ * A base library for bluetooth framework
+ *
+ * @addtogroup BLUETOOTHFW
+ * @{
+ */
+
+#define BLUETOOTH_ADDRESS_LENGTH 6 /**< This specifies bluetooth device address length */
+#define BLUETOOTH_INTERFACE_NAME_LENGTH 16
+#define BLUETOOTH_DEVICE_NAME_LENGTH_MAX 248 /**< This specifies maximum device name length */
+
+#define BLUETOOTH_MAX_SERVICES_FOR_DEVICE 40 /**< This specifies maximum number of services
+ a device can support */
+
+#define BLUETOOTH_UUID_STRING_MAX 50
+
+#define BLUETOOTH_OOB_DATA_LENGTH 16
+/**
+ * This is Bluetooth Connected event role
+ */
+#define RFCOMM_ROLE_SERVER 1
+#define RFCOMM_ROLE_CLIENT 2
+
+/**
+ * This is Bluetooth error code
+ */
+#define BLUETOOTH_ERROR_BASE ((int)0) /**< Error code base */
+
+#define BLUETOOTH_ERROR_NONE ((int)0) /**< No error #0 */
+#define BLUETOOTH_ERROR_CANCEL ((int)BLUETOOTH_ERROR_BASE - 0x01)
+ /**< cancelled */
+#define BLUETOOTH_ERROR_INVALID_CALLBACK ((int)BLUETOOTH_ERROR_BASE - 0x02)
+ /**< Callback error */
+#define BLUETOOTH_ERROR_INVALID_PARAM ((int)BLUETOOTH_ERROR_BASE - 0x03)
+ /**< invalid paramerror */
+#define BLUETOOTH_ERROR_INVALID_DATA ((int)BLUETOOTH_ERROR_BASE - 0x04)
+ /**< invalid data error */
+#define BLUETOOTH_ERROR_MEMORY_ALLOCATION ((int)BLUETOOTH_ERROR_BASE - 0x05)
+ /**< Memory allocation error */
+#define BLUETOOTH_ERROR_OUT_OF_MEMORY ((int)BLUETOOTH_ERROR_BASE - 0x06)
+ /**< out of memory error */
+#define BLUETOOTH_ERROR_TIMEOUT ((int)BLUETOOTH_ERROR_BASE - 0x07)
+ /**< timeout error */
+#define BLUETOOTH_ERROR_NO_RESOURCES ((int)BLUETOOTH_ERROR_BASE - 0x08)
+ /**< No resource error */
+#define BLUETOOTH_ERROR_INTERNAL ((int)BLUETOOTH_ERROR_BASE - 0x09)
+ /**< internal error */
+#define BLUETOOTH_ERROR_NOT_SUPPORT ((int)BLUETOOTH_ERROR_BASE - 0x0a)
+ /**< Not supported error */
+#define BLUETOOTH_ERROR_DEVICE_NOT_ENABLED ((int)BLUETOOTH_ERROR_BASE - 0x0b)
+ /**< Operation is failed because
+ of not enabled BT Adapter */
+#define BLUETOOTH_ERROR_DEVICE_ALREADY_ENABLED ((int)BLUETOOTH_ERROR_BASE - 0x0c)
+ /**< Enabling is failed because of
+ already enabled BT Adapter */
+#define BLUETOOTH_ERROR_DEVICE_BUSY ((int)BLUETOOTH_ERROR_BASE - 0x0d)
+ /**< Operation is failed because of
+ other on going operation */
+#define BLUETOOTH_ERROR_ACCESS_DENIED ((int)BLUETOOTH_ERROR_BASE - 0x0e)
+ /**< access denied error */
+#define BLUETOOTH_ERROR_MAX_CLIENT ((int)BLUETOOTH_ERROR_BASE - 0x0f)
+ /**< max client error */
+#define BLUETOOTH_ERROR_NOT_FOUND ((int)BLUETOOTH_ERROR_BASE - 0x10)
+ /**< not found error */
+#define BLUETOOTH_ERROR_SERVICE_SEARCH_ERROR ((int)BLUETOOTH_ERROR_BASE - 0x11)
+ /**< service search fail */
+#define BLUETOOTH_ERROR_PARING_FAILED ((int)BLUETOOTH_ERROR_BASE - 0x12)
+ /**< pairing failed error */
+#define BLUETOOTH_ERROR_NOT_PAIRED ((int)BLUETOOTH_ERROR_BASE - 0x13)
+ /**< Not paired error */
+#define BLUETOOTH_ERROR_SERVICE_NOT_FOUND ((int)BLUETOOTH_ERROR_BASE - 0x14)
+ /**< no service error */
+#define BLUETOOTH_ERROR_NOT_CONNECTED ((int)BLUETOOTH_ERROR_BASE - 0x15)
+ /**< no connection error */
+#define BLUETOOTH_ERROR_ALREADY_CONNECT ((int)BLUETOOTH_ERROR_BASE - 0x16)
+ /**< alread connected error */
+#define BLUETOOTH_ERROR_CONNECTION_BUSY ((int)BLUETOOTH_ERROR_BASE - 0x17)
+ /**< connection busy error */
+#define BLUETOOTH_ERROR_CONNECTION_ERROR ((int)BLUETOOTH_ERROR_BASE - 0x18)
+ /**< connection error */
+#define BLUETOOTH_ERROR_MAX_CONNECTION ((int)BLUETOOTH_ERROR_BASE - 0x19)
+ /**< max connection error*/
+#define BLUETOOTH_ERROR_NOT_IN_OPERATION ((int)BLUETOOTH_ERROR_BASE - 0x1a)
+ /**< Not in operation */
+#define BLUETOOTH_ERROR_CANCEL_BY_USER ((int)BLUETOOTH_ERROR_BASE - 0x1b)
+ /**< Cancelled by user */
+#define BLUETOOTH_ERROR_REGISTRATION_FAILED ((int)BLUETOOTH_ERROR_BASE - 0x1c)
+ /**< Service record registration failed */
+#define BLUETOOTH_ERROR_IN_PROGRESS ((int)BLUETOOTH_ERROR_BASE - 0x1d)
+ /**< Operation in progress */
+#define BLUETOOTH_ERROR_AUTHENTICATION_FAILED ((int)BLUETOOTH_ERROR_BASE - 0x1e)
+ /**< authentication failed error when paring*/
+#define BLUETOOTH_ERROR_HOST_DOWN ((int)BLUETOOTH_ERROR_BASE - 0x1f)
+ /**< Remote host is down */
+#define BLUETOOTH_ERROR_END_OF_DEVICE_LIST ((int)BLUETOOTH_ERROR_BASE - 0x20)
+ /**< End of device list */
+
+#define BLUETOOTH_ERROR_AGENT_ALREADY_EXIST ((int)BLUETOOTH_ERROR_BASE - 0x21)
+ /**< Obex agent already exists */
+#define BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST ((int)BLUETOOTH_ERROR_BASE - 0x22)
+ /**< Obex agent does not exist */
+
+#define BLUETOOTH_ERROR_ALREADY_INITIALIZED ((int)BLUETOOTH_ERROR_BASE - 0x23)
+ /**< Already initialized */
+
+
+/**
+ * This is Bluetooth device address type, fixed to 6 bytes ##:##:##:##:##:##
+ */
+typedef struct {
+ unsigned char addr[BLUETOOTH_ADDRESS_LENGTH];
+} bluetooth_device_address_t;
+
+/**
+ * This is Bluetooth device name type, maximum size of Bluetooth device name is 248 bytes
+ */
+typedef struct {
+ char name[BLUETOOTH_DEVICE_NAME_LENGTH_MAX + 1];
+} bluetooth_device_name_t;
+
+/**
+ * Adapter state
+ */
+typedef enum {
+ BLUETOOTH_ADAPTER_DISABLED, /**< Bluetooth adapter is disabled */
+ BLUETOOTH_ADAPTER_ENABLED, /**< Bluetooth adapter is enabled */
+ BLUETOOTH_ADAPTER_CHANGING_ENABLE, /**< Bluetooth adapter is currently enabling */
+ BLUETOOTH_ADAPTER_CHANGING_DISABLE, /**< Bluetooth adapter is currently disabling */
+} bluetooth_adapter_state_t;
+
+/**
+ * Discoverable mode
+ */
+typedef enum {
+ BLUETOOTH_DISCOVERABLE_MODE_CONNECTABLE, /**< Non discoverable mode */
+ /*Changed the order to make it compatable with old method */
+ BLUETOOTH_DISCOVERABLE_MODE_GENERAL_DISCOVERABLE,/**< Discoverable mode */
+ BLUETOOTH_DISCOVERABLE_MODE_TIME_LIMITED_DISCOVERABLE,
+ /**< Discoverable mode with time limit
+ After specific timeout, it is changed
+ to non discoverable mode */
+} bluetooth_discoverable_mode_t;
+
+/**
+ * Network connect mode
+ */
+typedef enum {
+ BLUETOOTH_NETWORK_PANU_ROLE,
+ /**< PAN user */
+ BLUETOOTH_NETWORK_NAP_ROLE,/**< Network Access Point */
+ BLUETOOTH_NETWORK_GN_ROLE, /**< Group ad-hoc Network */
+ BLUETOOTH_NETWORK_CUSTOM_UUID, /**< Custom role */
+} bluetooth_network_role_t;
+
+/**
+ * Service type
+ */
+typedef enum {
+ BLUETOOTH_RFCOMM_SERVICE = 0x01,
+ BLUETOOTH_A2DP_SERVICE = 0x02,
+ BLUETOOTH_HSP_SERVICE = 0x04,
+ BLUETOOTH_HID_SERVICE = 0x08,
+} bluetooth_service_type_t;
+
+#define BLUETOOTH_EVENT_BASE ((int)(0x0000)) /**< No event */
+#define BLUETOOTH_EVENT_GAP_BASE ((int)(BLUETOOTH_EVENT_BASE + 0x0010))
+ /**< Base ID for GAP Event */
+#define BLUETOOTH_EVENT_SDP_BASE ((int)(BLUETOOTH_EVENT_GAP_BASE + 0x0020))
+ /**< Base ID for SDP events */
+#define BLUETOOTH_EVENT_RFCOMM_BASE ((int)(BLUETOOTH_EVENT_SDP_BASE + 0x0020))
+ /**< Base ID for RFCOMM events */
+#define BLUETOOTH_EVENT_NETWORK_BASE ((int)(BLUETOOTH_EVENT_RFCOMM_BASE + 0x0020))
+ /**< Base ID for NETWORK events */
+#define BLUETOOTH_EVENT_HDP_BASE ((int)(BLUETOOTH_EVENT_NETWORK_BASE + 0x0020))
+ /**< Base ID for HDP events */
+#define BLUETOOTH_EVENT_OPC_BASE ((int)(BLUETOOTH_EVENT_HDP_BASE + 0x0020))
+ /**< Base ID for OPC events */
+#define BLUETOOTH_EVENT_OBEX_SERVER_BASE ((int)(BLUETOOTH_EVENT_OPC_BASE + 0x0020))
+ /**< Base ID for Obex Server events */
+#define BLUETOOTH_EVENT_GATT_BASE ((int)(BLUETOOTH_EVENT_OBEX_SERVER_BASE + 0x0020))
+ /**< Base ID for GATT events */
+
+#define BLUETOOTH_EVENT_AUDIO_BASE ((int)(BLUETOOTH_EVENT_GATT_BASE + 0x0020))
+ /**< Base ID for Audio events */
+#define BLUETOOTH_EVENT_HID_BASE ((int)(BLUETOOTH_EVENT_AUDIO_BASE + 0x0020))
+ /**< Base ID for HID events */
+
+/**
+ * Bluetooth event type
+ */
+typedef enum {
+ BLUETOOTH_EVENT_NONE = BLUETOOTH_EVENT_BASE,/**< No event */
+
+ BLUETOOTH_EVENT_ENABLED, /**< Bluetooth event adpater enabled */
+ BLUETOOTH_EVENT_DISABLED, /**< Bluetooth event adpater disabled */
+ BLUETOOTH_EVENT_LOCAL_NAME_CHANGED, /**< Bluetooth event local name changed*/
+ BLUETOOTH_EVENT_DISCOVERABLE_TIMEOUT_REQUESTED,
+ /**< Bluetooth event Discoverable timeout requested*/
+ BLUETOOTH_EVENT_DISCOVERABLE_MODE_CHANGED, /**< Bluetooth event mode changed */
+ BLUETOOTH_EVENT_DISCOVERY_OPTION_REQUESTED, /**< Bluetooth event discovery option */
+ BLUETOOTH_EVENT_DISCOVERY_STARTED, /**< Bluetooth event discovery started */
+ BLUETOOTH_EVENT_DISCOVERY_FINISHED, /**< Bluetooth event discovery finished */
+
+ BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND, /**< Bluetooth event remote deice found */
+ BLUETOOTH_EVENT_REMOTE_DEVICE_NAME_UPDATED,/**< Bluetooth event remote device name updated*/
+ BLUETOOTH_EVENT_BONDING_FINISHED, /**< Bluetooth event bonding completed */
+ BLUETOOTH_EVENT_BONDED_DEVICE_REMOVED, /**< Bluetooth event bonding removed */
+ BLUETOOTH_EVENT_BONDED_DEVICE_FOUND, /**< Bluetooth event paired device found */
+ BLUETOOTH_EVENT_REMOTE_DEVICE_READ, /**< Bluetooth event read remote device */
+ BLUETOOTH_EVENT_DEVICE_AUTHORIZED, /**< Bluetooth event authorize device */
+ BLUETOOTH_EVENT_DEVICE_UNAUTHORIZED, /**< Bluetooth event unauthorize device */
+ BLUETOOTH_EVENT_DISCOVERABLE_TIMEOUT_CHANGED, /**< Bluetooth event mode changed */
+
+ BLUETOOTH_EVENT_SERVICE_SEARCHED = BLUETOOTH_EVENT_SDP_BASE,
+ /**< Bluetooth event serice search base id */
+ BLUETOOTH_EVENT_SERVICE_SEARCH_CANCELLED, /**< Bluetooth event service search cancelled */
+ BLUETOOTH_EVENT_RFCOMM_DATA_RECEIVED = BLUETOOTH_EVENT_RFCOMM_BASE,
+ /**< RFCOMM data receive event */
+ BLUETOOTH_EVENT_RFCOMM_CONNECTED, /**< Rfcomm server incomming connection */
+ BLUETOOTH_EVENT_RFCOMM_DISCONNECTED, /**< Rfcomm server/client disconnect */
+
+ BLUETOOTH_EVENT_RFCOMM_AUTHORIZE,
+
+ BLUETOOTH_EVENT_DEVICE_CONNECTED, /**< Bluetooth event device connected */
+ BLUETOOTH_EVENT_DEVICE_DISCONNECTED, /**< Bluetooth event device disconnected */
+
+ BLUETOOTH_EVENT_RFCOMM_SERVER_REMOVED,
+
+ BLUETOOTH_EVENT_NETWORK_SERVER_ACTIVATED = BLUETOOTH_EVENT_NETWORK_BASE,
+ /**< Bluetooth Network event */
+ BLUETOOTH_EVENT_NETWORK_SERVER_DEACTIVATED, /**< Network server deactivated */
+ BLUETOOTH_EVENT_NETWORK_SERVER_CONNECTED, /**< Network connected event in server */
+ BLUETOOTH_EVENT_NETWORK_SERVER_DISCONNECTED,
+ /**< Network disconnected evnet in server */
+
+ BLUETOOTH_EVENT_NETWORK_CONNECTED, /**< Network connected event in client*/
+ BLUETOOTH_EVENT_NETWORK_DISCONNECTED, /**< Network disconnected evnet in client*/
+
+ BLUETOOTH_EVENT_HDP_CONNECTED
+ = BLUETOOTH_EVENT_HDP_BASE, /**<HDP Connect>*/
+ BLUETOOTH_EVENT_HDP_DISCONNECTED, /**<HDP Disconnect>*/
+ BLUETOOTH_EVENT_HDP_DATA_RECEIVED, /**<HDP Data Indication>*/
+
+ BLUETOOTH_EVENT_OPC_CONNECTED = BLUETOOTH_EVENT_OPC_BASE,
+ /* OPC Connected event */
+ BLUETOOTH_EVENT_OPC_DISCONNECTED, /* OPC Disonnected event */
+ BLUETOOTH_EVENT_OPC_TRANSFER_STARTED, /* OPC Transfer started event */
+ BLUETOOTH_EVENT_OPC_TRANSFER_PROGRESS, /* OPC Transfer progress event */
+ BLUETOOTH_EVENT_OPC_TRANSFER_COMPLETE, /* OPC Transfer Complete event */
+
+ BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_AUTHORIZE = BLUETOOTH_EVENT_OBEX_SERVER_BASE,
+ /* Obex server authorize event*/
+ BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_STARTED, /* Obex Server transfer started event*/
+ BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_PROGRESS,/* Obex Server transfer progress event*/
+ BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_COMPLETED,/* Obex Server transfer complete event*/
+ BLUETOOTH_EVENT_OBEX_SERVER_CONNECTION_AUTHORIZE,
+
+ BLUETOOTH_EVENT_GATT_SVC_CHAR_DISCOVERED = BLUETOOTH_EVENT_GATT_BASE,
+ /**<Discovered GATT service characteristics event*/
+ BLUETOOTH_EVENT_GATT_CHAR_VAL_CHANGED,
+ /**<Remote GATT charateristic value changed event*/
+ BLUETOOTH_EVENT_GATT_GET_CHAR_FROM_UUID,
+
+ BLUETOOTH_EVENT_AG_CONNECTED = BLUETOOTH_EVENT_AUDIO_BASE, /**<AG service connected event*/
+ BLUETOOTH_EVENT_AG_DISCONNECTED, /**<AG service disconnected event*/
+ BLUETOOTH_EVENT_AG_SPEAKER_GAIN, /**<Speaker gain request event*/
+ BLUETOOTH_EVENT_AG_MIC_GAIN, /**<Mic gain request event*/
+ BLUETOOTH_EVENT_AG_AUDIO_CONNECTED, /**<AV & AG service connected event*/
+ BLUETOOTH_EVENT_AG_AUDIO_DISCONNECTED, /**<AV & AG service disconnected event*/
+ BLUETOOTH_EVENT_AV_CONNECTED, /**<AV service connected event*/
+ BLUETOOTH_EVENT_AV_DISCONNECTED, /**<AV service disconnected event*/
+ BLUETOOTH_EVENT_AVRCP_CONNECTED, /**<AVRCP service connected event*/
+ BLUETOOTH_EVENT_AVRCP_DISCONNECTED, /**<AVRCP service disconnected event*/
+ BLUETOOTH_EVENT_AVRCP_SETTING_SHUFFLE_STATUS, /**<AVRCP service player suffle status event*/
+ BLUETOOTH_EVENT_AVRCP_SETTING_EQUALIZER_STATUS, /**<AVRCP service player equalizer status event*/
+ BLUETOOTH_EVENT_AVRCP_SETTING_REPEAT_STATUS, /**<AVRCP service player repeat status event*/
+ BLUETOOTH_EVENT_AVRCP_SETTING_SCAN_STATUS, /**<AVRCP service player scan status event*/
+
+ BLUETOOTH_HID_CONNECTED = BLUETOOTH_EVENT_HID_BASE, /**< Input connectd event*/
+ BLUETOOTH_HID_DISCONNECTED, /**< Input disconnectd event*/
+ BLUETOOTH_EVENT_MAX, /**< Bluetooth event Max value */
+} bluetooth_event_type_t;
+
+ /**
+ * This bt_service_uuid_list_t enum indicates service uuid list .
+ * This values is stored the service_list_array in bt_sdp_info_t and bluetooth_device_info_t.
+ */
+
+typedef enum {
+ BLUETOOTH_SPP_PROFILE_UUID = ((unsigned short)0x1101), /**<SPP*/
+ BLUETOOTH_LAP_PROFILE_UUID = ((unsigned short)0x1102), /**<LAP*/
+ BLUETOOTH_DUN_PROFILE_UUID = ((unsigned short)0x1103), /**<DUN*/
+ BLUETOOTH_OBEX_IR_MC_SYNC_SERVICE_UUID = ((unsigned short)0x1104), /**<OBEX IR MC SYNC*/
+ BLUETOOTH_OBEX_OBJECT_PUSH_SERVICE_UUID = ((unsigned short)0x1105), /**<OPP*/
+ BLUETOOTH_OBEX_FILE_TRANSFER_UUID = ((unsigned short)0x1106), /**<FTP*/
+ BLUETOOTH_IRMC_SYNC_COMMAND_UUID = ((unsigned short)0x1107), /**<IRMC SYNC COMMAND*/
+ BLUETOOTH_HS_PROFILE_UUID = ((unsigned short)0x1108), /**<HS*/
+ BLUETOOTH_CTP_PROFILE_UUID = ((unsigned short)0x1109), /**<CTP*/
+ BLUETOOTH_AUDIO_SOURCE_UUID = ((unsigned short)0x110A), /**<AUDIO SOURCE*/
+ BLUETOOTH_AUDIO_SINK_UUID = ((unsigned short)0x110B), /**<AUDIO SINK*/
+ BLUETOOTH_AV_REMOTE_CONTROL_TARGET_UUID = ((unsigned short)0x110C), /**<AV REMOTE CONTROL
+ TARGET*/
+ BLUETOOTH_ADVANCED_AUDIO_PROFILE_UUID = ((unsigned short)0x110D), /**<A2DP*/
+ BLUETOOTH_AV_REMOTE_CONTROL_UUID = ((unsigned short)0x110E), /**<AV REMOTE CONTROL UUID*/
+ BLUETOOTH_AV_REMOTE_CONTROL_CONTROLLER_UUID = ((unsigned short)0x110F), /**<AV REMOTE CONTROLLER UUID*/
+ BLUETOOTH_ICP_PROFILE_UUID = ((unsigned short)0x1110), /**<ICP*/
+ BLUETOOTH_FAX_PROFILE_UUID = ((unsigned short)0x1111), /**<FAX*/
+ BLUETOOTH_HEADSET_AG_SERVICE_UUID = ((unsigned short)0x1112), /**<HS AG */
+ BLUETOOTH_PAN_PANU_PROFILE_UUID = ((unsigned short)0x1115), /**<PAN*/
+ BLUETOOTH_PAN_NAP_PROFILE_UUID = ((unsigned short)0x1116), /**<PAN*/
+ BLUETOOTH_PAN_GN_PROFILE_UUID = ((unsigned short)0x1117), /**<PAN*/
+ BLUETOOTH_DIRECT_PRINTING = ((unsigned short)0x1118),
+ BLUETOOTH_OBEX_BPPS_PROFILE_UUID = ((unsigned short)0x1118), /**<OBEX BPPS*/ /* Will be removed */
+ BLUETOOTH_REFERENCE_PRINTING = ((unsigned short)0x1119),
+ BLUETOOTH_OBEX_IMAGING_UUID = ((unsigned short)0x111A), /**<OBEX_IMAGING*/
+ BLUETOOTH_OBEX_IMAGING_RESPONDER_UUID = ((unsigned short)0x111B), /**<OBEX_IMAGING
+ RESPONDER*/
+ BLUETOOTH_IMAGING_AUTOMATIC_ARCHIVE_UUID = ((unsigned short)0x111C), /**<IMAGING AUTOMATIC ARCHIVE*/
+ BLUETOOTH_IMAGING_REFERENCED_OBJECTS_UUID = ((unsigned short)0x111D), /**<IMAGING REFERENCED OBJECTS*/
+ BLUETOOTH_HF_PROFILE_UUID = ((unsigned short)0x111E), /**<HF*/
+ BLUETOOTH_HFG_PROFILE_UUID = ((unsigned short)0x111F), /**<HFG*/
+ BLUETOOTH_DIRECT_PRINTING_REFERENCE_OBJ_UUID = ((unsigned short)0x1120),
+ /**<DIRECT PRINTING*/
+ BLUETOOTH_REFLECTED_UI = ((unsigned short)0x1121), /**<REFLECTED UI*/
+ BLUETOOTH_BASIC_PRINTING = ((unsigned short)0x1122), /**<BASIC PRINTING*/
+ BLUETOOTH_PRINTING_STATUS = ((unsigned short)0x1123), /**<PRINTING STATUS*/
+ BLUETOOTH_OBEX_PRINTING_STATUS_UUID = ((unsigned short)0x1123), /**<OBEX PRINTING STATUS*/ /* Will be removed */
+ BLUETOOTH_HID_PROFILE_UUID = ((unsigned short)0x1124), /**<HID*/
+ BLUETOOTH_HCR_PROFILE_UUID = ((unsigned short)0x1125), /**<HCRP*/
+ BLUETOOTH_HCR_PRINT_UUID = ((unsigned short)0x1126), /**<HCR PRINT*/
+ BLUETOOTH_HCR_SCAN_UUID = ((unsigned short)0x1127), /**<HCR SCAN*/
+ BLUETOOTH_SIM_ACCESS_PROFILE_UUID = ((unsigned short)0x112D), /**<SIM ACCESS PROFILE*/
+ BLUETOOTH_PBAP_PCE_UUID = ((unsigned short)0x112E), /**<PBAP - PCE*/
+ BLUETOOTH_PBAP_PSE_UUID = ((unsigned short)0x112F), /**<OBEX PBA*/
+ BLUETOOTH_OBEX_PBA_PROFILE_UUID = ((unsigned short)0x112F), /**<OBEX PBA*/ /* Will be removed */
+ BLUETOOTH_OBEX_PBAP_UUID = ((unsigned short)0x1130), /**<OBEX PBA*/
+ BLUETOOTH_HEADSET_HS_UUID = ((unsigned short)0x1131), /**<HEADSET HS*/
+ BLUETOOTH_MESSAGE_ACCESS_SERVER_UUID = ((unsigned short)0x1132),/**<MESSAGE ACCESS SERVER*/
+ BLUETOOTH_MESSAGE_NOTIFICATION_SERVER_UUID = ((unsigned short)0x1133),/**<MESSAGE NOTIFICATION SERVER*/
+ BLUETOOTH_MESSAGE_ACCESS_PROFILE_UUID = ((unsigned short)0x1134),/**<MESSAGE ACCESS PROFILE*/
+ BLUETOOTH_PNP_INFORMATION_UUID = ((unsigned short)0x1200), /**<PNP*/
+ BLUETOOTH_GENERIC_NETWORKING_UUID = ((unsigned short)0x1201), /**<GENERIC NETWORKING*/
+ BLUETOOTH_GENERIC_FILE_TRANSFER_UUID = ((unsigned short)0x1202),/**<GENERIC FILE TRANSFER*/
+ BLUETOOTH_GENERIC_AUDIO_UUID = ((unsigned short)0x1203), /**<GENERIC AUDIO*/
+ BLUETOOTH_GENERIC_TELEPHONY_UUID = ((unsigned short)0x1204), /**<GENERIC TELEPHONY*/
+ BLUETOOTH_VIDEO_SOURCE_UUID = ((unsigned short)0x1303), /**<VEDIO SOURCE*/
+ BLUETOOTH_VIDEO_SINK_UUID = ((unsigned short)0x1304), /**<VEDIO SINK*/
+ BLUETOOTH_VIDEO_DISTRIBUTION_UUID = ((unsigned short)0x1305), /**<VEDIO DISTRIBUTION*/
+ BLUETOOTH_HDP_UUID = ((unsigned short)0x1400), /**<HDP*/
+ BLUETOOTH_HDP_SOURCE_UUID = ((unsigned short)0x1401), /**<HDP SOURCE*/
+ BLUETOOTH_HDP_SINK_UUID = ((unsigned short)0x1402), /**<HDP SINK*/
+ BLUETOOTH_OBEX_SYNCML_TRANSFER_UUID = ((unsigned short)0x0000) /**<OBEX_SYNC*/ /* Will be removed */
+} bluetooth_service_uuid_list_t;
+
+/**
+* Service class part of class of device returned from device discovery
+*/
+typedef enum {
+ BLUETOOTH_DEVICE_SERVICE_CLASS_LIMITED_DISCOVERABLE_MODE = 0x002000,
+ BLUETOOTH_DEVICE_SERVICE_CLASS_POSITIONING = 0x010000, /**< */
+ BLUETOOTH_DEVICE_SERVICE_CLASS_NETWORKING = 0x020000, /**< */
+ BLUETOOTH_DEVICE_SERVICE_CLASS_RENDERING = 0x040000, /**< */
+ BLUETOOTH_DEVICE_SERVICE_CLASS_CAPTURING = 0x080000, /**< */
+ BLUETOOTH_DEVICE_SERVICE_CLASS_OBJECT_TRANSFER = 0x100000, /**< */
+ BLUETOOTH_DEVICE_SERVICE_CLASS_AUDIO = 0x200000, /**< */
+ BLUETOOTH_DEVICE_SERVICE_CLASS_TELEPHONY = 0x400000, /**< */
+ BLUETOOTH_DEVICE_SERVICE_CLASS_INFORMATION = 0x800000, /**< */
+} bluetooth_device_service_class_t;
+
+
+/**
+ * Major device mask (For device discovery)
+ */
+typedef enum {
+ BLUETOOTH_DEVICE_MAJOR_MASK_MISC = 0x00,
+ BLUETOOTH_DEVICE_MAJOR_MASK_COMPUTER = 0x0001,
+ BLUETOOTH_DEVICE_MAJOR_MASK_PHONE = 0x0002,
+ BLUETOOTH_DEVICE_MAJOR_MASK_LAN_ACCESS_POINT = 0x0004,
+ BLUETOOTH_DEVICE_MAJOR_MASK_AUDIO = 0x0008,
+ BLUETOOTH_DEVICE_MAJOR_MASK_PERIPHERAL = 0x0010,
+ BLUETOOTH_DEVICE_MAJOR_MASK_IMAGING = 0x0020,
+ BLUETOOTH_DEVICE_MAJOR_MASK_WEARABLE = 0x0040,
+ BLUETOOTH_DEVICE_MAJOR_MASK_TOY = 0x0080,
+ BLUETOOTH_DEVICE_MAJOR_MASK_HEALTH = 0x0100,
+} bluetooth_device_major_mask_t;
+
+
+/**
+ * Major device class (part of Class of Device)
+ */
+typedef enum {
+ BLUETOOTH_DEVICE_MAJOR_CLASS_MISC = 0x00, /**< Miscellaneous major device class*/
+ BLUETOOTH_DEVICE_MAJOR_CLASS_COMPUTER = 0x01, /**< Computer major device class*/
+ BLUETOOTH_DEVICE_MAJOR_CLASS_PHONE = 0x02, /**< Phone major device class*/
+ BLUETOOTH_DEVICE_MAJOR_CLASS_LAN_ACCESS_POINT = 0x03, /**< LAN major device class*/
+ BLUETOOTH_DEVICE_MAJOR_CLASS_AUDIO = 0x04, /**< AUDIO major device class*/
+ BLUETOOTH_DEVICE_MAJOR_CLASS_PERIPHERAL = 0x05, /**< Peripheral major device class*/
+ BLUETOOTH_DEVICE_MAJOR_CLASS_IMAGING = 0x06, /**< Imaging major device class*/
+ BLUETOOTH_DEVICE_MAJOR_CLASS_WEARABLE = 0x07, /**< Wearable device class*/
+ BLUETOOTH_DEVICE_MAJOR_CLASS_TOY = 0x08, /**< Toy device class*/
+ BLUETOOTH_DEVICE_MAJOR_CLASS_HEALTH = 0x09, /**< Health device class*/
+ BLUETOOTH_DEVICE_MAJOR_CLASS_UNCLASSIFIED = 0x1F /**< Unknown major device class*/
+} bluetooth_device_major_class_t;
+
+typedef enum {
+ BLUETOOTH_DEVICE_MINOR_CLASS_UNCLASSIFIED = 0x00, /**< unclassified minor class */
+
+ /* About Computer Major class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_DESKTOP_WORKSTATION = 0x04, /**< desktop workstation
+ minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_SERVER_CLASS_COMPUTER = 0x08, /**< server minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_LAPTOP = 0x0C, /**< laptop minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_HANDHELD_PC_OR_PDA = 0x10, /**< PDA minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_PALM_SIZED_PC_OR_PDA = 0x14, /**< PALM minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_WEARABLE_COMPUTER = 0x18, /**< Wearable PC minor class */
+
+ /* About Phone Major class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_CELLULAR = 0x04, /**< Cellular minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_CORDLESS = 0x08, /**< cordless minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_SMART_PHONE = 0x0C, /**< smart phone minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_WIRED_MODEM_OR_VOICE_GATEWAY = 0x10,
+ /**< voice gateway minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_COMMON_ISDN_ACCESS = 0x14, /**< ISDN minor class */
+
+ /* About LAN/Network Access Point Major class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_FULLY_AVAILABLE = 0x04, /**< Fully available minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_1_TO_17_PERCENT_UTILIZED = 0x20, /**< 1-17% utilized minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_17_TO_33_PERCENT_UTILIZED = 0x40, /**< 17-33% utilized minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_33_TO_50_PERCENT_UTILIZED = 0x60, /**< 33-50% utilized minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_50_to_67_PERCENT_UTILIZED = 0x80, /**< 50-67% utilized minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_67_TO_83_PERCENT_UTILIZED = 0xA0, /**< 67-83% utilized minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_83_TO_99_PERCENT_UTILIZED = 0xC0, /**< 83-99% utilized minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_NO_SERVICE_AVAILABLE = 0xE0, /**< No service available minor class */
+
+ /* About Audio/Video Major class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_HEADSET_PROFILE = 0x04, /**< Headset minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_HANDSFREE = 0x08, /**< Handsfree minor class*/
+
+ BLUETOOTH_DEVICE_MINOR_CLASS_MICROPHONE = 0x10, /**< Microphone minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_LOUD_SPEAKER = 0x14, /**< Loud Speaker minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_HEADPHONES = 0x18, /**< Headphones minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_PORTABLE_AUDIO = 0x1C, /**< Portable Audio minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_CAR_AUDIO = 0x20, /**< Car Audio minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_SET_TOP_BOX = 0x24, /**< Set top box minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_HIFI_AUDIO_DEVICE = 0x28, /**< Hifi minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_VCR = 0x2C, /**< VCR minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_VIDEO_CAMERA = 0x30, /**< Video Camera minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_CAM_CORDER = 0x34, /**< CAM Corder minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_VIDEO_MONITOR = 0x38, /**<Video Monitor minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_VIDEO_DISPLAY_AND_LOUD_SPEAKER = 0x3C,
+ /**< Video Display and Loud
+ Speaker minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_VIDEO_CONFERENCING = 0x40, /**< Video Conferencing minor
+ class */
+
+ BLUETOOTH_DEVICE_MINOR_CLASS_GAMING_OR_TOY = 0x48, /**< Gaming or toy minor class */
+
+ /* About Peripheral Major class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_KEY_BOARD = 0x40, /**< Key board minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_POINTING_DEVICE = 0x80, /**< Pointing Device minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_COMBO_KEYBOARD_OR_POINTING_DEVICE = 0xC0,
+ /**< Combo Keyboard or pointing
+ device minorclass */
+
+ BLUETOOTH_DEVICE_MINOR_CLASS_JOYSTICK = 0x04, /**< JoyStick minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_GAME_PAD = 0x08, /**< Game Pad minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_REMOTE_CONTROL = 0x0C, /**< Remote Control minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_SENSING_DEVICE = 0x10, /**< Sensing Device minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_DIGITIZER_TABLET = 0x14, /**< Digitizer minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_CARD_READER = 0x18, /**< Card Reader minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_DIGITAL_PEN = 0x1C, /**< Digital pen minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_HANDHELD_SCANNER = 0x20, /**< Handheld scanner for bar-codes, RFID minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_HANDHELD_GESTURAL_INPUT_DEVICE = 0x24, /**< Handheld gestural input device minor class */
+
+ /* About Imaging Major class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_DISPLAY = 0x10, /**< Display minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_CAMERA = 0x20, /**< Camera minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_SCANNER = 0x40, /**< Scanner minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_PRINTER = 0x80, /**< Printer minor class */
+
+ /* About Wearable Major class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_WRIST_WATCH = 0x04, /**< Wrist watch minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_PAGER = 0x08, /**< Pager minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_JACKET = 0x0C, /**< Jacket minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_HELMET = 0x10, /**< Helmet minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_GLASSES = 0x14, /**< Glasses minor class */
+
+ /* About Toy Major class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_ROBOT = 0x04, /**< Robot minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_VEHICLE = 0x08, /**< Vehicle minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_DOLL_OR_ACTION = 0x0C, /**< Doll or Action minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_CONTROLLER = 0x10, /**< Controller minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_GAME = 0x14, /**< Game minor class */
+
+ /* About Health Major class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_BLOOD_PRESSURE_MONITOR = 0x04, /**< Blood Pressure minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_THERMOMETER = 0x08, /**< Thermometer minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_WEIGHING_SCALE = 0x0C, /**< Weighing Scale minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_GLUCOSE_METER = 0x10, /**< Glucose minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_PULSE_OXIMETER = 0x14, /**< Pulse Oximeter minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_HEART_OR_PULSE_RATE_MONITOR = 0x18,/**< Heart or pulse rate monitor minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_MEDICAL_DATA_DISPLAY = 0x1C, /**< Medical minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_STEP_COUNTER = 0x20, /**< Step Counter minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_BODY_COMPOSITION_ANALYZER = 0x24, /**< Body composition analyzer minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_PEAK_FLOW_MONITOR = 0x28, /**< Peak flow monitor minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_MEDICATION_MONITOR = 0x2C, /**< Medication monitor minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_KNEE_PROSTHESIS = 0x30, /**< Knee prosthesis minor class */
+ BLUETOOTH_DEVICE_MINOR_CLASS_ANKLE_PROSTHESIS = 0x34, /**< Ankle prosthesis minor class */
+} bluetooth_device_minor_class_t;
+
+/**
+ * structure to hold the device information
+ */
+typedef struct {
+ bluetooth_device_major_class_t major_class; /**< major device class */
+ bluetooth_device_minor_class_t minor_class; /**< minor device class */
+ bluetooth_device_service_class_t service_class;
+ /**< service device class */
+} bluetooth_device_class_t;
+
+/**
+* structure to hold the device information
+*/
+typedef struct {
+ bluetooth_device_address_t device_address; /**< device address */
+ bluetooth_device_name_t device_name; /**< device name */
+ bluetooth_device_class_t device_class; /**< device class */
+ char uuids[BLUETOOTH_MAX_SERVICES_FOR_DEVICE][BLUETOOTH_UUID_STRING_MAX];
+ unsigned int service_list_array[BLUETOOTH_MAX_SERVICES_FOR_DEVICE]; /**< Use enum values in bt_service_uuid_list_t */
+ int service_index;
+ int rssi; /**< received strength signal*/
+ gboolean paired; /**< paired flag */
+ gboolean connected; /**< connected flag */
+ gboolean trust; /**< connected flag */
+} bluetooth_device_info_t;
+
+/**
+ * structure to hold the paired device information
+ */
+typedef struct {
+ bluetooth_device_address_t device_address; /**< paired device address */
+ bluetooth_device_name_t device_name; /**< device name */
+ bluetooth_device_class_t device_class; /**< device class */
+} bluetooth_paired_device_info_t;
+
+/**
+* structure to hold the paired device information
+*/
+typedef struct {
+ bluetooth_device_address_t device_address;
+ /**< device address */
+ char interface_name[BLUETOOTH_INTERFACE_NAME_LENGTH + 1];
+ /**< network interface name */
+} bluetooth_network_device_info_t;
+
+/**
+* Stucture to hold discovery option
+*/
+typedef struct {
+ unsigned short max_response; /**< the number of maximum response */
+ unsigned short discovery_duration;
+ /**< duration of discovery (seconds) */
+ unsigned int classOfDeviceMask; /**< mask for values of class of device. to be used with
+ classOfDevice variable */
+} bluetooth_discovery_option_t;
+
+/**
+ * Stucture to hold event information
+ */
+typedef struct {
+ int event; /**< event type */
+ int result; /**< Success or error value */
+ void *param_data;
+ /**<parameter data pointer */
+ void *user_data;
+} bluetooth_event_param_t;
+
+typedef struct {
+ bluetooth_device_address_t device_addr;
+ char uuids[BLUETOOTH_MAX_SERVICES_FOR_DEVICE][BLUETOOTH_UUID_STRING_MAX];
+ unsigned int service_list_array[BLUETOOTH_MAX_SERVICES_FOR_DEVICE]; /**< Use enum values in bt_service_uuid_list_t */
+ unsigned int service_name_array[BLUETOOTH_MAX_SERVICES_FOR_DEVICE];
+ int service_index;
+} bt_sdp_info_t;
+
+/**
+ * Stucture to rfcomm receive data
+ */
+
+typedef struct {
+ int socket_fd;
+ /**< the socket fd */
+ int buffer_size;/**< the length of the receive buffer */
+ char *buffer;
+ /**< the receive data buffer */
+} bluetooth_rfcomm_received_data_t;
+
+/**
+* Stucture to rfcomm connection
+*/
+
+typedef struct {
+ int socket_fd;
+ /**< the socket fd */
+ int device_role;/** < Device role - RFCOMM_ROLE_SERVER or RFCOMM_ROLE_CLIENT */
+ bluetooth_device_address_t device_addr;
+ /**< device address */
+ char uuid[BLUETOOTH_UUID_STRING_MAX];
+} bluetooth_rfcomm_connection_t;
+
+/**
+ * Stucture to rfcomm disconnection
+ */
+typedef struct {
+ int socket_fd;
+ /**< the socket fd */
+ int device_role;/** < Device role - RFCOMM_ROLE_SERVER or RFCOMM_ROLE_CLIENT */
+ bluetooth_device_address_t device_addr;
+ /**< device address */
+ char uuid[BLUETOOTH_UUID_STRING_MAX];
+} bluetooth_rfcomm_disconnection_t;
+
+typedef struct {
+ int socket_fd;
+ /**< the socket fd */
+ bluetooth_device_address_t device_addr;
+ /**< device address */
+} bluetooth_rfcomm_connection_request_t;
+
+/**
+ * HDP QOS types
+ */
+typedef enum {
+ HDP_QOS_RELIABLE,
+ HDP_QOS_STREAMING,
+ HDP_QOS_ANY
+}bt_hdp_qos_type_t;
+
+/**
+ * HDP Role types
+ */
+typedef enum {
+ HDP_ROLE_SOURCE = 0x0,
+ HDP_ROLE_SINK
+}bt_hdp_role_type_t;
+
+
+/**
+ * Stucture to HDP connected
+ */
+typedef struct {
+ const char *app_handle; /**< the application handle */
+ unsigned int channel_id; /**< the channel id */
+ bt_hdp_qos_type_t type; /**< the QOS type */
+ bluetooth_device_address_t device_address; /**< the remote address */
+} bt_hdp_connected_t;
+
+/**
+ * Stucture to HDP disconnected
+ */
+typedef struct {
+ unsigned int channel_id; /**< the channel id */
+ bluetooth_device_address_t device_address; /**< the remote address */
+} bt_hdp_disconnected_t;
+
+/**
+ * Stucture to HDP data indication
+ */
+typedef struct {
+ unsigned int channel_id; /**< the channel id */
+ const char *buffer; /**< the RX data buffer */
+ unsigned int size; /**< the RX data size */
+} bt_hdp_data_ind_t;
+
+/**
+ * Stucture to OPP client transfer information
+ */
+typedef struct {
+ char *filename;
+ unsigned long size;
+ int percentage;
+}bt_opc_transfer_info_t;
+
+/* Obex Server transfer type */
+#define TRANSFER_PUT "PUT"
+#define TRANSFER_GET "GET"
+/**
+ * Stucture to OPP/FTP Server authorize information
+ */
+typedef struct {
+ char *filename;
+ int length;
+} bt_obex_server_authorize_into_t;
+
+/**
+ * Stucture to OPP/FTP server transfer information
+ */
+typedef struct {
+ char *filename;
+ char *device_name;
+ char *type;
+ int transfer_id;
+ unsigned long file_size;
+ int percentage;
+} bt_obex_server_transfer_info_t;
+
+/**
+ * Stucture to OOB data
+ */
+
+typedef struct {
+ unsigned char hash[BLUETOOTH_OOB_DATA_LENGTH];
+ unsigned char randomizer[BLUETOOTH_OOB_DATA_LENGTH];
+ unsigned int hash_len;
+ unsigned int randomizer_len;
+} bt_oob_data_t;
+
+/**
+ * Structure to GATT attribute handle data
+ */
+
+typedef struct {
+ int count;
+ char **handle;
+} bt_gatt_handle_info_t;
+
+/**
+ * Structure to GATT Remote service data
+ */
+
+typedef struct {
+ char *uuid;
+ char *handle;
+ bt_gatt_handle_info_t handle_info;
+} bt_gatt_service_property_t;
+
+/**
+ * Structure to GATT Remote characteristic data
+ */
+
+typedef struct {
+ char *service_handle;
+ bt_gatt_handle_info_t handle_info;
+} bt_gatt_discovered_char_t;
+
+/**
+ * Structure to format of GATT Characteristic Value
+ */
+
+typedef struct {
+ unsigned char format;
+ unsigned char exponent;
+ unsigned short unit;
+ unsigned char name_space;
+ unsigned short description;
+} bt_gatt_char_format_t;
+
+/**
+ * Structure to GATT Characteristic property
+ */
+
+typedef struct {
+ char *handle;
+ char *uuid;
+ char *name;
+ char *description;
+ bt_gatt_char_format_t format;
+ unsigned char *val;
+ unsigned int val_len;
+ char *representation;
+} bt_gatt_char_property_t;
+
+/**
+ * Structure to GATT Characteristic value
+ */
+
+typedef struct {
+ char *char_handle;
+ guint8 *char_value;
+ guint32 val_len;
+} bt_gatt_char_value_t;
+
+/**
+ * Callback pointer type
+ */
+typedef void (*bluetooth_cb_func_ptr) (int, bluetooth_event_param_t *, void *);
+
+/**
+ * @fn int bluetooth_register_callback(bluetooth_cb_func_ptr callback_ptr, void *user_data)
+ * @brief Set the callback function pointer for bluetooth event
+ *
+ *
+ * This API will register the callback function, when any response and event are received from
+ * bluetooth framework. @n
+ * this registered callback function will be get called with appropriate event and data structures.
+ * This function is a synchronous call. An application developer can call
+ * bluetooth_register_callback() function to register a callback function of bluetooth_cb_func_ptr
+ * type. This registered function will receive events of bluetooth_event_type_t type along with
+ * data any.
+ *
+ *
+ * @param[in] callback_ptr A pointer to the callback function
+ * @param[in] user_data A pointer to user data
+ * @return BLUETOOTH_ERROR_NONE - Success
+ * @remark None
+ * @see None
+@code
+void bt_event_callback(int event, bluetooth_event_param_t *param, void *user_data)
+{
+ GMainLoop *main_loop = (GMainLoop*) user_data;
+
+ switch(event)
+ {
+ // Code for each event
+ default:
+ g_main_loop_quit(main_loop);
+ break;
+ }
+}
+
+int main()
+{
+ GMainLoop *main_loop = NULL;
+ int ret = 0;
+ g_type_init();
+ main_loop = g_main_loop_new(NULL, FALSE);
+ ret = bluetooth_register_callback(bt_event_callback, (void*)main_loop);
+ if (ret >= BLUETOOTH_ERROR_NONE)
+ {
+ // bluetooth_register_callback returned Success
+ }
+ else
+ {
+ // bluetooth_register_callback returned failiure
+ }
+ g_main_loop_run(main_loop);
+}
+@endcode
+ */
+int bluetooth_register_callback(bluetooth_cb_func_ptr callback_ptr, void *user_data);
+
+/**
+ * @fn int bluetooth_deregister_callback(bluetooth_cb_func_ptr callback_ptr)
+ * @brief Set the callback function pointer for bluetooth event
+ *
+ *
+ * This API will register the callback function, when any response and event are received from
+ * bluetooth framework. @n
+ * this registered callback function will be get called with appropriate event and data structures.
+ * This function is a synchronous call. An application developer can call
+ * bluetooth_register_callback() function to register a callback function of bluetooth_cb_func_ptr
+ * type. This registered function will receive events of bluetooth_event_type_t type along with
+ * data any.
+ *
+ *
+ * @param[in] none
+ * @return BLUETOOTH_ERROR_NONE - Success
+ * @remark None
+ * @see None
+@code
+void bt_event_callback(int event, bluetooth_event_param_t *param, void *user_data)
+{
+ GMainLoop *main_loop = (GMainLoop*) user_data;
+
+ switch(event)
+ {
+ // Code for each event
+ default:
+ g_main_loop_quit(main_loop);
+ break;
+ }
+}
+
+int main()
+{
+ GMainLoop *main_loop = NULL;
+ int ret = 0;
+ g_type_init();
+ main_loop = g_main_loop_new(NULL, FALSE);
+ ret = bluetooth_register_callback(bt_event_callback, (void*)main_loop);
+ if (ret >= BLUETOOTH_ERROR_NONE)
+ {
+ // bluetooth_register_callback returned Success
+ }
+ else
+ {
+ // bluetooth_register_callback returned failiure
+ }
+ ret = bluetooth_deregister_callback(void);
+ g_main_loop_run(main_loop);
+}
+@endcode
+ */
+int bluetooth_unregister_callback(void);
+
+/**
+ * @fn int bluetooth_enable_adapter(void)
+ * @brief Enable the Bluetooth H/W
+ *
+ *
+ * This API can be used to activate Bluetooth. It initializes Bluetooth protocol stack for use and
+ * send request to bluetooth chip for activation.
+ * This function is typically called at startup or when Bluetooth services are required. This
+ * function must be called before calling any other API of Bluetooth operations.
+ *
+ * Before performing any operations like Device discover, service search etc.., the adapter must be
+ * enabled.
+ *
+ * This function is a asynchronous call.
+ * If the call is success then the application will receive BLUETOOTH_EVENT_ENABLED event
+ * through registered callback function with appropriate result code
+ * BLUETOOTH_CHANGE_STATUS_TIMEOUT - Timeout has happen \n
+ * BLUETOOTH_ERROR_NONE - Success \n
+ *
+ * If the adpter is not enabled with in 30 seconds then BLUETOOTH_EVENT_ENABLED with result code
+ * BLUETOOTH_CHANGE_STATUS_TIMEOUT will come
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success\n
+ * BLUETOOTH_ERROR_DEVICE_ALREADY_ENABLED - Adapter already enabled\n
+ * BLUETOOTH_ERROR_ACCESS_DENIED - Enabling adapter is not allowed by MDM policy\n
+ * BLUETOOTH_ERROR_IN_PROGRESS - Adapter is activating or deactivating\n
+ * @exception BLUETOOTH_ERROR_INTERNAL - Dbus proxy call is fail
+ * @remark None
+ * @see bluetooth_check_adapter, bluetooth_disable_adapter
+@code
+void bt_event_callback(int event, bluetooth_event_param_t *param)
+{
+ switch(event)
+ {
+ case BLUETOOTH_EVENT_ENABLED:
+ if (param->result == BLUETOOTH_ERROR_NONE)
+ {
+ // Successfully Enabled
+ }
+ else
+ {
+ // Failed
+ }
+ break;
+ }
+}
+
+...
+
+int ret = 0;
+ret = bluetooth_enable_adapter();
+
+@endcode
+ */
+int bluetooth_enable_adapter(void);
+
+/**
+ * @fn int bluetooth_disable_adapter(void)
+ * @brief Disable the Bluetooth H/W
+ *
+ *
+ * This function disables Bluetooth protocol stack and hardware. This function is called when
+ * Bluetooth is no longer used. It will internally free all resources and power off the RF radio.
+ *
+ * Bluetooth adapter should be disabled to switch off Bluetooth chip (and thereby saving power).
+ * bluetooth_disable_adapter() API will do that job for you. After switching off Bluetooth,
+ * BLUETOOTH_EVENT_DISABLED will be sent by SDK to application for confirmation with appropriate
+ * error code.
+ * The various error codes are BLUETOOTH_ERROR_NONE for success and BLUETOOTH_ERROR_INTERNAL for
+ * internal error.
+ *
+ * This function is a asynchronous call.
+ * If this call is success then the applications will receive BLUETOOTH_EVENT_DISABLED event
+ * through registered callback function.
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success\n
+ * BLUETOOTH_ERROR_IN_PROGRESS - Adapter is activating or deactivating\n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Bluetooth adapter is not enabled\n
+ * @exception BLUETOOTH_ERROR_INTERNAL - Dbus proxy call is fail
+ * @remark None
+ * @see bluetooth_check_adapter, bluetooth_enable_adapter
+@code
+void bt_event_callback(int event, bluetooth_event_param_t *param)
+{
+ switch(event)
+ {
+ case BLUETOOTH_EVENT_DISABLED:
+ if (param->result == BLUETOOTH_ERROR_NONE)
+ {
+ // Successfully disabled
+ }
+ else
+ {
+ // Failed
+ }
+ break;
+ }
+}
+
+...
+
+int ret = 0;
+ret = bluetooth_disable_adapter();
+@endcode
+ */
+int bluetooth_disable_adapter(void);
+
+/**
+ * @fn int bluetooth_reset_adapter(void)
+ * @brief Reset the Bluetooth H/W and values
+ *
+ *
+ * This function resets Bluetooth protocol stack and hardware. This function is called when
+ * an user want to initialize Bluetooth environment.
+ *
+ * The various error codes are BLUETOOTH_ERROR_NONE for success and BLUETOOTH_ERROR_INTERNAL for
+ * internal error.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success\n
+ * @exception BLUETOOTH_ERROR_INTERNAL - Dbus proxy call is fail
+ * @remark None
+ * @see bluetooth_check_adapter, bluetooth_enable_adapter
+@code
+...
+
+int ret = 0;
+ret = bluetooth_reset_adapter();
+@endcode
+ */
+int bluetooth_reset_adapter(void);
+
+/**
+ * @fn int bluetooth_is_supported(void)
+ * @brief Check if the bluetooth is supported or not by the current target
+ *
+ * This API checks whether the bluetooth is supported or not.
+ * This API only run by root permission.
+ * This API was made for the MDM service.
+ *
+ * This function is a synchronous call.
+ *
+ * @return 0 - if bluetooth is not supported\n
+ * 1 - if bluetooth is supported\n
+ * BLUETOOTH_ERROR_INTERNAL - Error in API internal
+ * @remark None
+@code
+
+int ret = 0;
+ret = bluetooth_is_supported();
+@endcode
+ */
+int bluetooth_is_supported(void);
+
+
+/**
+ * @fn int bluetooth_check_adapter(void)
+ * @brief Check the current status of the Bluetooth adapter
+ *
+ *
+ * This API checks whether the Bluetooth adapter is enabled or not. Before performing any operations
+ * the bluetooth adapter should be enabled. This API helps to find out the current state of the
+ * bluetooth adapter.
+ * This API get the adapter internal data structure and check current adapter status.
+ *
+ * This function is a synchronous call.
+ *
+ *
+ * @return BLUETOOTH_ADAPTER_DISABLED - if bluetooth adapter is disabled\n
+ * BLUETOOTH_ADAPTER_ENABLED - if bluetooth adapter is enabled\n
+ * @remark None
+ * @see bluetooth_enable_adapter, bluetooth_disable_adapter
+@code
+
+int ret = 0;
+ret = bluetooth_check_adapter();
+@endcode
+ */
+int bluetooth_check_adapter(void);
+
+/**
+ * @fn int bluetooth_get_local_address(bluetooth_device_address_t *local_address)
+ * @brief Get the local adapter bluetooth address
+ *
+ *
+ * This API is used, get the device address of the local bluetooth adapter. Before calling this API,
+ * the adapter should be enabled.
+ * In its output parameter, you can receive bluetooth_device_address_t type of pointer which will
+ * contain Bluetooth address.
+ * Since its inconvenient for user to remember the address, Bluetooth provides a method to have a
+ * friendly name for each device.
+ * There is no event callback for this API.
+ *
+ * This function is a synchronous call.
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Succeess \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter (NULL buffer) \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
+ * @param[out] local_address a device address of local bluetooth adapter
+ * @remark None
+ * @see None
+@code
+
+bluetooth_device_address_t local_address={0,};
+int ret = 0;
+
+ret = bluetooth_get_local_address(&local_address);
+@endcode
+ */
+int bluetooth_get_local_address(bluetooth_device_address_t *local_address);
+
+/**
+ * @fn int bluetooth_get_local_name(bluetooth_device_name_t* local_name)
+ * @brief Get the local device name
+ *
+ *
+ * This function is used, get the local device name. Since its difficult to remember the Adapter
+ * address, the friendly name can be assigned to the adapter and we can get it using this API. This
+ * friendly name is retrived by the remote device and displaying.
+ * Before calling this API, the adapter should be enabled. There is no event callback for this API.
+ *
+ * This function is a synchronous call.
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter (NULL buffer)\n
+ * @param[out] local_name a local device name
+ * @remark None
+ * @see None
+@code
+bluetooth_device_name_t local_name={0,}
+int ret = 0;
+ret = bluetooth_get_local_name (&local_name);
+@endcode
+ */
+int bluetooth_get_local_name(bluetooth_device_name_t *local_name);
+
+/**
+ * @fn int bluetooth_set_local_name(const bluetooth_device_name_t *local_name)
+ * @brief Set the local device name
+ *
+ *
+ * This function is used to set the local device name. This is a human friendly name whose
+ * length can be BLUETOOTH_DEVICE_NAME_LENGTH_MAX maximum
+ *
+ * This function is a synchronous call.
+ *
+ * @param[in] local_name bluetooth device name to set local device
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Bluetooth name parameter is incorrect \n
+ * BLUETOOTH_ERROR_INVALID_DATA - Device address provided is incorrect \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Pre-allocated memory error \n
+ * BLUETOOTH_ERROR_INTERNAL - The dbus method call is fail \n
+ *
+ * @remark None
+
+@code
+bluetooth_device_name_t local_name={0,}
+int ret = 0;
+ret = bluetooth_set_local_name (&local_name);
+@endcode
+ */
+int bluetooth_set_local_name(const bluetooth_device_name_t *local_name);
+
+
+/**
+ * @fn int bluetooth_is_service_used(const char *service_uuid, gboolean *used)
+ * @brief Check if the uuid is used or not
+ *
+ * This function is used to check if the uuid is used or not.
+ *
+ * This function is a synchronous call.
+ *
+ * @param[in] service_uuid service uuid (UUID 128 bit as string)
+ * @param[out] used if the uuid is used or not
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Bluetooth name parameter is incorrect \n
+ * BLUETOOTH_ERROR_INTERNAL - The dbus method call is fail \n
+ *
+ * @remark None
+ *
+@code
+gboolean used = FALSE;
+const char *uuid ="00001101-0000-1000-8000-00805F9B34FB";
+ret = bluetooth_is_service_used(uuid, &used);
+@endcode
+ */
+int bluetooth_is_service_used(const char *service_uuid, gboolean *used);
+
+/**
+ * @fn int bluetooth_is_device_connected(const bluetooth_device_address_t *device_address, bluetooth_service_type_t type, gboolean *is_connected)
+ * @brief Check if the device is connected to the specific service
+ *
+ * This function is used to check if if the device is connected to the specific service.
+ *
+ * This function is a synchronous call.
+ *
+ * @param[in] local_address a device address of remote bluetooth device
+ * @param[in] type the service type
+ * @param[out] is_connected if the device is connected or not
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Bluetooth name parameter is incorrect \n
+ * BLUETOOTH_ERROR_INTERNAL - The dbus method call is fail \n
+ *
+ * @remark None
+ *
+@code
+gboolean is_connected = FALSE;
+bluetooth_device_address_t device_address={{0x00,0x0D,0xFD,0x24,0x5E,0xFF}};
+ret = bluetooth_is_device_connected(&device_address, BLUETOOTH_HSP_SERVICE, &used);
+@endcode
+ */
+int bluetooth_is_device_connected(const bluetooth_device_address_t *device_address,
+ bluetooth_service_type_t type,
+ gboolean *is_connected);
+
+/**
+ * @fn int bluetooth_get_discoverable_mode(bluetooth_discoverable_mode_t *discoverable_mode_ptr)
+ * @brief Get the visibility mode
+ *
+ *
+ * This function is used to get the discoverable mode (Visibility option). Depending upon the
+ * visibity mode, the property of the device is determined whether it can be discoverable, non
+ * discoverable, connectable etc. Before calling this API make sure that the adapter is enabled.
+ *
+ * This function is a synchronous call.
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
+ * BLUETOOTH_ERROR_INVALID_DATA - Invalid data \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal IPC error \n
+ * @param[out] discoverable_mode current bluetooth discoverable mode
+ * @remark None
+ * @see bluetooth_set_discoverable_mode
+ @code
+ bluetooth_discoverable_mode_t discoverable_mode_ptr;
+ int ret = 0;
+ ret = bluetooth_get_discoverable_mode (&discoverable_mode_ptr);
+ @endcode
+ */
+int bluetooth_get_discoverable_mode(bluetooth_discoverable_mode_t *discoverable_mode_ptr);
+
+/**
+ * @fn int bluetooth_set_discoverable_mode(bluetooth_discoverable_mode_t discoverable_mode,
+ * int timeout)
+ * @brief Set the visibility mode
+ *
+ *
+ * This function is used to set the discoverable mode (Visibility option).
+ *
+ * Many times user may want to keep his device discoverable so that when peer device is performing
+ * device search, he/she can find user's device. Application programmer can keep the mode as
+ * BLUETOOTH_DISCOVERABLE_MODE_GENERAL_DISCOVERABLE or
+ * BLUETOOTH_DISCOVERABLE_MODE_TIME_LIMITED_DISCOVERABLE for the same purpose. However, all these
+ * modes cause bluetooth adapter to consume more battery. Hence developer should generally
+ * keep discoverable mode as BLUETOOTH_DISCOVERABLE_MODE_CONNECTABLE.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_NOT_SUPPORT - Requested mode is not supported \n
+ *
+ * @param[in] discoverable_mode the bluetooth discoverable mode to set
+ * @param[in] timeout discoverable time in only limited discoverable mode (second), default: 0
+ * @remark None
+ * @see bluetooth_get_discoverable_mode
+
+@code
+
+bluetooth_discoverable_mode_t mode;
+int ret = 0;
+mode= BLUETOOTH_DISCOVERABLE_MODE_TIME_LIMITED_DISCOVERABLE;
+ret = bluetooth_set_discoverable_mode (mode, 180);
+
+@endcode
+ */
+int bluetooth_set_discoverable_mode(bluetooth_discoverable_mode_t discoverable_mode,
+ int timeout);
+
+
+/**
+ * @fn int bluetooth_get_timeout_value(int *timeout)
+ * @brief Get the visibility timeout value
+ *
+ *
+ * This function is used to get the visibility timeout
+ * Before calling this API make sure that the adapter is enabled.
+ *
+ * This function is a synchronous call.
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
+ * BLUETOOTH_ERROR_INVALID_DATA - Invalid data \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal IPC error \n
+ * @param[out] timeout remain visibility timeout value
+ * @remark None
+ * @see bluetooth_set_discoverable_mode
+ @code
+ int timeout;
+ int ret = 0;
+ ret = bluetooth_get_timeout_value (&timeout);
+ @endcode
+ */
+int bluetooth_get_timeout_value(int *timeout);
+
+
+/**
+ * @fn int bluetooth_start_discovery(unsigned short max_response, unsigned short discovery_duration,
+ * unsigned int classOfDeviceMask)
+ * @brief Start the device discovery
+ *
+ * To connect connect to peer bluetooth device, you will need to know its bluetooth address and its
+ * name. You can search for Bluetooth devices in vicinity by bluetooth_start_discovery() API. It
+ * first performs an inquiry. For each device found from the inquiry it gets the remote name of the
+ * device. Bluetooth device address and name are given to Application via
+ * BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND event. In param_data of bluetooth_event_param_t, you will
+ * receive a pointer to a structure of bluetooth_device_info_t type. you will receive device
+ * address, device name, device class, rssi (received signal strength indicator). please see
+ * bluetooth_device_info_t for more details.
+ *
+ *
+ * This API provides searching options like max responses, discovery duration in seconds and class
+ * of device mask to filter device search. some times there may be too many bluetooth devices in
+ * vicinity of your device.in such scenario, application can request to reduce number of responces
+ * (BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND event) with help of max_response parameter. However if you
+ * pass zero, bluetooth adapter will not restrict number of responses. you can also specify duration
+ * of the seach in discovery_duration. bluetooth adapter will automatically stop device search after
+ * application defined time. please note that discovery_duration should be mentioned in seconds.
+ * Also note that search will end after 180 seconds automatically if you pass 0 in discovery
+ * duration.
+ *
+ * sometimes user may want to search for a perticular kind of device. for ex, mobile or pc. in such
+ * case, you can use classOfDeviceMask parameter. please see bluetooth_device_service_class_t,
+ * bluetooth_device_major_class_t and bluetooth_device_minor_class_t enums
+ *
+ * This function is a asynchronous call.
+ * If the call is success then the application will receive BLUETOOTH_EVENT_DISCOVERY_STARTED event
+ * through registered callback function.
+ *
+ * The discovery is responded by an BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND event for each device it
+ * finds and an BLUETOOTH_EVENT_REMOTE_DEVICE_NAME_UPDATED event for each fount device its name
+ * finds.
+ *
+ * The completion or cancellation of the discovery is indicated by an
+ * BLUETOOTH_EVENT_DISCOVERY_FINISHED event.
+ *
+ * The device discovery can be cancelled by calling bluetooth_stop_discovery().
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Bluetooth adapter is not enabled \n
+ * BLUETOOTH_ERROR_DEVICE_BUSY - Bluetooth adapter is busy doing some operation \n
+ * BLUETOOTH_ERROR_INTERNAL - System error like heap full has occured or bluetooth
+ agent is not running \n
+ *
+ * @param[in] max_response define the maximum response of the number of founded devices
+ (0 means unlimited)
+ * @param[in] discovery_duration define bluetooth discovery duration (0 means 180s )
+ * @param[in] classOfDeviceMask define classes of the device mask which user wants
+ (refer to class of device)
+ * @remark None
+ * @see bluetooth_cancel_discovery, bluetooth_device_info_t
+
+@code
+void bt_event_callback(int event, bluetooth_event_param_t *param)
+{
+ switch(event)
+ {
+ case BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND:
+ {
+ bluetooth_device_info_t *device_info = NULL;
+ printf("BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND, result [0x%04x]",
+ param->result);
+ device_info = (bluetooth_device_info_t *)param->param_data;
+ memcpy(&searched_device, &device_info->device_address,
+ sizeof(bluetooth_device_address_t));
+ printf("dev [%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X]",
+ device_info->device_address.addr[0],
+ device_info->device_address.addr[1],
+ device_info->device_address.addr[2],
+ device_info->device_address.addr[3],
+ device_info->device_address.addr[4],
+ device_info->device_address.addr[5]);
+ break;
+ }
+ case BLUETOOTH_EVENT_REMOTE_DEVICE_NAME_UPDATED:
+ {
+ bluetooth_device_info_t *device_info = NULL;
+ printf("BLUETOOTH_EVENT_REMOTE_DEVICE_NAME_UPDATED, result [0x%04x]",
+ param->result);
+ device_info = (bluetooth_device_info_t *)param->param_data;
+ memcpy(&searched_device, &device_info->device_address,
+ sizeof(bluetooth_device_address_t));
+ printf("dev [%s] [%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X]",
+ device_info->device_name.name,
+ device_info->device_address.addr[0],
+ device_info->device_address.addr[1],
+ device_info->device_address.addr[2],
+ device_info->device_address.addr[3],
+ device_info->device_address.addr[4],
+ device_info->device_address.addr[5]);
+ break;
+ }
+
+ case BLUETOOTH_EVENT_DISCOVERY_FINISHED:
+ printf("BLUETOOTH_EVENT_DISCOVERY_FINISHED, result[0x%04x]", param->result);
+ break;
+ }
+}
+
+unsigned short max_response;
+unsigned short discovery_duration;
+unsigned classOfDeviceMask;
+int ret = 0;
+
+max_response =0;
+discovery_duration =0;
+classOfDeviceMask =0;
+
+ret = bluetooth_start_discovery(max_response,discovery_duration,classOfDeviceMask);
+
+@endcode
+ *
+ */
+
+int bluetooth_start_discovery(unsigned short max_response,
+ unsigned short discovery_duration,
+ unsigned int classOfDeviceMask);
+
+/**
+ * @fn int bluetooth_cancel_discovery (void)
+ * @brief Cancel the on-going device discovery operation
+ *
+ *
+ * This function stops the on-going device discovery operation. This API has to be called after the
+ * bluetooth_start_discovery API and before the BLUETOOTH_EVENT_DISCOVERY_FINISHED event comes of
+ * the bluetooth_start_discovery API
+ *
+ * Normally the device discovery takes a more time (~10.24 seconds) to get all the devices in its
+ * vicinity and it recevies as BLUETOOTH_EVENT_REMOTE_DEVICE_FOUND event. This API helps us to
+ * cancel the discover request once the user received the device to which he wish to connect.
+ *
+ * This function is a asynchronous call.
+ * If the call is success to cancel discovey then the application will receive
+ * BLUETOOTH_EVENT_DISCOVERY_FINISHED event through registered callback function
+ * with an error code BLUETOOTH_ERROR_CANCEL. In the case of failure the error code will be
+ * BLUETOOTH_ERROR_NONE
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
+ * BLUETOOTH_ERROR_NOT_IN_OPERATION - No Discovery operation in progess to cancel \n
+ * BLUETOOTH_ERROR_ACCESS_DENIED - Currently in discovery but it is requested from
+ other application \n
+ * BLUETOOTH_ERROR_INTERNAL - Internel IPC error \n
+ * @remark None
+ * @see bluetooth_start_discovery
+@code
+void bt_event_callback(int event, bluetooth_event_param_t *param)
+{
+ switch(event)
+ {
+ case BLUETOOTH_EVENT_DISCOVERY_FINISHED:
+ TC_PRT("BLUETOOTH_EVENT_DISCOVERY_FINISHED, result[0x%04x]", param->result);
+ break;
+ }
+}
+
+..
+
+int ret = 0;
+
+ret = bluetooth_cancel_discovery();
+@endcode
+ */
+int bluetooth_cancel_discovery(void);
+
+/**
+ * @fn int bluetooth_is_discovering(void)
+ * @brief Check for the device discovery is in-progress or not.
+ *
+ * This API is used to check the current status of the Discovery operation.If discovery is in\
+ * progress normally other operations are not allowed.
+ * If a device discovery is in progress, we have to either cancel the discovery operation or wait
+ * for the BLUETOOTH_EVENT_DISCOVERY_FINISHED
+ * event before performing other operations. This API is used to get for the current discovery
+ * operation status and using bluetooth_cancel_discovery()
+ * we can cancell the ongoing discovery process.
+ * Before calling this API, make sure that the adapter is enabled. There is no callback event for
+ * this API.
+ *
+ * This function checks whether the device discovery is started or not.
+ *
+ * This function is a synchronous call.
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Discovery is not in progress \n
+ * BLUETOOTH_ERROR_NONE+1 - Discovery in progress \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
+ *
+ * @remark None
+ * @see bluetooth_start_discovery, bluetooth_cancel_discovery
+
+@code
+int ret = 0;
+ret = bluetooth_is_discovering ();
+@endcode
+ */
+int bluetooth_is_discovering(void);
+
+/**
+ * @fn int bluetooth_bond_device(const bluetooth_device_address_t *device_address)
+ * @brief Initiate a bonding process
+ *
+ *
+ * This function initiates a bonding procedure with a peer device. The bonding procedure
+ * enables authentication and optionally encryption on the Bluetooth link.
+ *
+ * Bonding is applied to the discovered device to which we need a secure connection. We cannot
+ * inititate the bonding request to the devices already in the paired list.
+ *
+ * Usually we call this API after the device discovery.
+ * This function is a asynchronous call.
+ *
+ * Response will be received through BLUETOOTH_EVENT_BONDING_FINISHED event. It can any of the below
+ * mentioed result code
+ * BLUETOOTH_ERROR_PARING_FAILED - Pairing faied \n
+ * BLUETOOTH_ERROR_ACCESS_DENIED - Authetication rejected \n
+ * BLUETOOTH_ERROR_CANCEL_BY_USER - Cancelled by the user \n
+ * BLUETOOTH_ERROR_PARING_FAILED - Pairing failed \n
+ * BLUETOOTH_ERROR_TIMEOUT - Timeout has haapened \n
+ *
+ * If the remote user is not responding with in a specific time(60 seconds), then a timeout happens
+ * and BLUETOOTH_EVENT_BONDING_FINISHED callback event is called with and BLUETOOTH_ERROR_TIMEOUT
+ * result code
+ *
+ * The bonding operation can be cancelled by calling bluetooth_cancel_bonding().
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
+ * BLUETOOTH_ERROR_DEVICE_BUSY - Adapter is busy or Discovery is in Progress \n
+ * BLUETOOTH_ERROR_INVALID_DATA - Invalid BD address \n
+ * @exception None
+ * @param[in] device_address This indicates an address of the device with which the pairing
+ * should be initiated
+ * @remark None
+ * @see bluetooth_cancel_bonding
+ @code
+void bt_event_callback(int event, bluetooth_event_param_t *param)
+{
+ switch(event)
+ {
+ case BLUETOOTH_EVENT_BONDING_FINISHED:
+ {
+ TC_PRT("BLUETOOTH_EVENT_BONDING_FINISHED, result [0x%04x]", param->result);
+ if (param->result >= BLUETOOTH_ERROR_NONE)
+ {
+ bluetooth_device_info_t *device_info = NULL;
+ device_info = (bluetooth_device_info_t *)param->param_data;
+ printf("dev [%s] [%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X]
+ mjr[%#x] min[%#x] srv[%#x]",
+ device_info->device_name.name,
+ device_info->device_address.addr[0],
+ device_info->device_address.addr[1],
+ device_info->device_address.addr[2],
+ device_info->device_address.addr[3],
+ device_info->device_address.addr[4],
+ device_info->device_address.addr[5],
+ device_info->device_class.major_class,
+ device_info->device_class.minor_class,
+ device_info->device_class.service_class);
+ }
+ else
+ {
+ //bonding failed
+ }
+ break;
+ }
+ }
+}
+
+...
+
+int ret = 0;
+bluetooth_device_address_t device_address={{0}};
+
+ret = bluetooth_bond_device(&device_address);
+
+@endcode
+ */
+int bluetooth_bond_device(const bluetooth_device_address_t *device_address);
+
+/**
+ * @fn int bluetooth_cancel_bonding(void)
+ * @brief Cancel the on-going bonding process
+ *
+ * This API is called to cancel the on-going bonding procedure. It should be called before the
+ * BLUETOOTH_EVENT_BONDING_FINISHED event comes.
+ * This API is useful when the remote device is not responding to the bond request or we wish to
+ * cancel the bonding request. In this case we need not wait for the timeout to happen.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_NOT_IN_OPERATION - No bonding request in progress \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
+ * @exception None
+ * @remark None
+ * @see bluetooth_bond_device
+@code
+...
+
+int ret = 0;
+
+ret = bluetooth_cancel_bonding();
+@endcode
+ */
+int bluetooth_cancel_bonding(void);
+
+/**
+ * @fn int bluetooth_unbond_device(const bluetooth_device_address_t *device_address)
+ * @brief Remove bonding
+ *
+ *
+ * To communicate with remote device over bluetooth link, user should bond with peer device.
+ * After bonding is over, peer device is added to list of bonded devices. bluetooth_unbond_device()
+ * API is used to remove peer device from the list. Please note that after removing the device
+ * from bonded device list, you cannot communication with peer device until bonding happens again.
+ *
+ * User can call this function by passing bluetooth device address of any bonded device. Please note
+ * that after successful return of this function, any bluetooth application running on your device
+ * will not be able to communicate with unbonded device until bond operation happens again using
+ * bluetooth_bond_device()
+ *
+ *
+ * This function is a asynchronous call. The request to remove the specified device from the bonded
+ * list is responded by an BLUETOOTH_EVENT_BONDED_DEVICE_REMOVED event. if the operation is success,
+ * you will receive BLUETOOTH_ERROR_NONE. BLUETOOTH_ERROR_NOT_PAIRED may be received in result code
+ * in case if there is a problem in locating given bluetooth device address in bonded devices list
+ *
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Device address is not valid \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Bluetooth adapter is not enabled \n
+ * BLUETOOTH_ERROR_DEVICE_BUSY - Bluetooth adapter is busy doing some operation \n
+ * BLUETOOTH_ERROR_INVALID_DATA - Device address provided is incorrect \n
+ * BLUETOOTH_ERROR_INTERNAL - System error like heap full has occured or bluetooth
+ * agent is not running \n
+ * BLUETOOTH_ERROR_NOT_PAIRED - Device address mentioned in the argument is not a
+ * bonded device \n
+ *
+ * @param[in] device_address This indicates an address of the device to remove bonding
+ *
+ * @remark None
+ *
+ * @see bluetooth_bond_device, bluetooth_cancel_bonding
+ *
+@code
+void bt_event_callback(int event, bluetooth_event_param_t *param)
+{
+ switch(event) {
+ case BLUETOOTH_EVENT_BONDED_DEVICE_REMOVED: {
+ bluetooth_device_address_t *dev_addr = NULL;
+
+ if (param->result == BLUETOOTH_ERROR_NONE) {
+ dev_addr = (bluetooth_device_address_t *)param->param_data;
+ //Unbound scuccess
+ printf("%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
+ dev_addr->addr[0], dev_addr->addr[1]
+ dev_addr->addr[2], dev_addr->addr[3]
+ dev_addr->addr[4], dev_addr->addr[5]
+ } else {
+ //unbound failure
+ }
+ }
+ }
+}
+
+...
+
+int ret = 0;
+bluetooth_device_address_t *device_address;
+
+// copy valid device address in device_address
+
+ret = bluetooth_unbond_device(device_address);
+@endcode
+ */
+int bluetooth_unbond_device(const bluetooth_device_address_t *device_address);
+
+/**
+ * @fn int bluetooth_get_bonded_device_list(GPtrArray **dev_list)
+ * @brief Get bonded(paired) device list
+ *
+ *
+ * This API gets all bonded device list.
+ * The devices in the bonded device list further can be used to perform the authorization by calling
+ * bluetooth_authorize_device API.
+ *
+ * This function is a synchronous call.
+ * Information for bonded devices can be obtained when result code is BLUETOOTH_ERROR_NONE. If not,
+ * there is no valid information in the dev_list.
+ * The len field in the dev_list represents the number of bonded devices. The data structure for
+ * bonded device information is bluetooth_device_info_t.
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_NOT_SUPPORT - Opreation not supported \n
+ * @remark None
+ * @see bluetooth_bond_device, bluetooth_unbond_device, bluetooth_authorize_device
+ @code
+void bt_get_bonded_devices(void)
+{
+...
+ int i;
+ GPtrArray *devinfo = NULL;
+ bluetooth_device_info_t *ptr;
+
+ // allocate the g_pointer_array
+ devinfo = g_ptr_array_new();
+
+ ret = bluetooth_get_bonded_device_list(&devinfo);
+ if (ret != BLUETOOTH_ERROR_NONE)
+ {
+ printf("bluetooth_get_bonded_device_list failed with [%d]",ret);
+ }
+ else
+ {
+ printf("g pointer arrary count : [%d]", devinfo->len);
+ for (i=0; i<devinfo->len; i++)
+ {
+ ptr = g_ptr_array_index(devinfo, i);
+ if (ptr != NULL)
+ {
+ printf("Name [%s]\n", ptr->device_name.name);
+ printf("Major Class [%d]\n", ptr->device_class.major_class);
+ printf("Minor Class [%d]\n", ptr->device_class.minor_class);
+ printf("Service Class [%d]\n", ptr->device_class.service_class);
+ printf("%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
+ ptr->device_address.addr[0],
+ ptr->device_address.addr[1], ptr->device_address.addr[2],
+ ptr->device_address.addr[3],
+ ptr->device_address.addr[4], ptr->device_address.addr[5]);
+
+ // handle
+ ...
+ }
+ }
+ }
+ // free g_pointer_array
+ g_ptr_array_free(devinfo, TRUE);
+}
+
+@endcode
+ */
+int bluetooth_get_bonded_device_list(GPtrArray **dev_list);
+
+/**
+ * @fn int bluetooth_get_bonded_device(const bluetooth_device_address_t *device_address,
+ * bluetooth_device_info_t *dev_info)
+ * @brief Get a bonded(paired) device
+ *
+ *
+ * This API gets a bonded device.
+ *
+ * This function is a synchronous call.
+ * Information for bonded devices can be obtained when result code is BLUETOOTH_ERROR_NONE. If not,
+ * there is no valid information in the dev_info.
+ * The data structure for bonded device information is bluetooth_device_info_t.
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_NOT_SUPPORT - Opreation not supported \n
+ * @remark None
+ * @see bluetooth_bond_device, bluetooth_unbond_device, bluetooth_authorize_device
+ @code
+void bt_get_bonded_device(void)
+{
+...
+ int i;
+ bluetooth_device_info_t devinfo = {0};
+ bluetooth_device_address_t device_address={{0x00,0x1C,0x43,0x2B,0x1A,0xE5}};
+
+ ret = bluetooth_get_bonded_device(&device_address, &devinfo);
+ if (ret != BLUETOOTH_ERROR_NONE)
+ {
+ printf("bluetooth_get_bonded_device failed with [%d]",ret);
+ }
+ else
+ {
+ printf("Name [%s]\n", devinfo.device_name.name);
+ printf("Major Class [%d]\n", devinfo.device_class.major_class);
+ printf("Minor Class [%d]\n", devinfo.device_class.minor_class);
+ printf("Service Class [%d]\n", devinfo.device_class.service_class);
+ printf("%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n", devinfo.device_address.addr[0],
+ devinfo.device_address.addr[1], devinfo.device_address.addr[2],
+ devinfo.device_address.addr[3], devinfo.device_address.addr[4],
+ devinfo.device_address.addr[5]);
+
+ // handle
+ ...
+ }
+}
+
+@endcode
+ */
+int bluetooth_get_bonded_device(const bluetooth_device_address_t *device_address,
+ bluetooth_device_info_t *dev_info);
+
+/**
+ * @fn int bluetooth_set_alias(const bluetooth_device_address_t *device_address, const char *alias)
+ * @brief set alias for bonded device
+ *
+ *
+ * This function set alias for bonded device.
+ *
+ * This function is a synchronous call.
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * @param[in] device_address This indicates an address of the remote device
+ * @param[in] alias This indicates an alias to set
+ * @remark None
+ * @see None
+@code
+int ret = 0;
+ret = bluetooth_set_alias(&remote_address);
+@endcode
+ */
+int bluetooth_set_alias(const bluetooth_device_address_t *device_address,
+ const char *alias);
+
+/**
+ * @fn int bluetooth_get_remote_device(const bluetooth_device_address_t *device_address)
+ * @brief Get remote deivice
+ *
+ *
+ * This function gets specific remote device.
+ *
+ * This function is a asynchronous call.
+ * This API is responded by an BLUETOOTH_EVENT_REMOTE_DEVICE_READ event.
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_NOT_SUPPORT - Operation not supported \n
+ * @param[in] device_address This indicates an address of the remote device
+ * @remark None
+ * @see None
+@code
+int ret = 0;
+ret = bluetooth_get_remote_device(&remote_address);
+@endcode
+ */
+int bluetooth_get_remote_device(const bluetooth_device_address_t *device_address);
+
+/**
+ * @fn int bluetooth_authorize_device(const bluetooth_device_address_t *device_address,
+ * gboolean authorized)
+ * @brief Authorize/Unauthorize a bonded device
+ *
+ *
+ * This function authorizes/unauthorize a bonded device. It decides the device to connect
+ * with/without user confirmation.
+ *
+ * If we select a paired device and make it authorized by calling this API with the authorized
+ * parameter to TRUE, then it will not ask for the user conformation before connecting. Similarly
+ * if we unauthorize the paired device by calling this API with the authorized parameter to FALSE,
+ * then it will ask for the user conformation before the connection.
+ *
+ * This API supposed to be called on the paired devices. Which means we have to use this API only
+ * after successful pairing.
+ *
+ * This function is a asynchronous call.
+ * Response will be received through BLUETOOTH_EVENT_DEVICE_AUTHORIZED event.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * @exception BLUETOOTH_ERROR_INTERNAL - Cannot get the interal DBUS proxy \n
+ * @param[in] device_address This indicates an address of the device to authorize \n
+ * @param[in] authorized TRUE : authorize FALSE: unauthorize
+ * @remark None
+ * @see bluetooth_get_bonded_device_list
+@code
+void bt_event_callback(int event, bluetooth_event_param_t *param)
+{
+ switch(event)
+ {
+ case BLUETOOTH_EVENT_DEVICE_AUTHORIZED :
+ {
+ if (param->result == BLUETOOTH_ERROR_NONE)
+ {
+ //Device authorized
+ }
+ //device authorization failed failure
+ }
+ }
+}
+
+...
+
+int ret = 0;
+bluetooth_device_address_t device_address={{0}};
+gboolean authorized;
+
+authorized =TRUE;
+
+ret = bluetooth_authorize_device(&device_address,authorized);
+@endcode
+ */
+int bluetooth_authorize_device(const bluetooth_device_address_t *device_address,
+ gboolean authorized);
+
+/**
+ * @fn int bluetooth_search_service(const bluetooth_device_address_t *device_address)
+ * @brief Get all services supported by remote device
+ *
+ *
+ * This API call initiates the search for the services supported by the specified device. Normally
+ * the service search will take a couple of seconds to get it completed. Before calling this API
+ * make sure that the Adapter is enabled. We have to give the device address of the remote device to
+ * perform the service search. We can get the device address by doing a device discovery operation.
+ *
+ *
+ * This function is a asynchronous call.
+ * The service search request is responded by BLUETOOTH_EVENT_SERVICE_SEARCHED event.
+ *
+ * There is a timeout associated with the service search. The default time out is 40 seconds. If the
+ * remove device did not respond with in the time out period the BLUETOOTH_EVENT_SERVICE_SEARCHED
+ * event is generated with appropriate result code.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_SERVICE_SEARCH_ERROR - Service search error (NULL device address) \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal IPC error \n
+ * @param[in] device_address This indicates an address of the device
+ * whose services need to be found
+ * @remark None
+ * @see bluetooth_cancel_service_search
+ */
+int bluetooth_search_service(const bluetooth_device_address_t *device_address);
+
+/**
+ * @fn int bluetooth_cancel_service_search(void)
+ * @brief Cancel the ongoing service search operation
+ *
+ *
+ * This function cancel the ongoing service search operation. This API is usually calling after the
+ * bluetooth_search_service API.
+ * Normally service search will take a more time (> 5 seconds) to complete. This API will be called
+ * if the user wish to cancel the Ongoing service search operation.
+ *
+ * This API should be called just after the bluetooth_search_service API and before the
+ * BLUETOOTH_EVENT_SERVICE_SEARCHED event
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_CANCEL - Error in service search cancel operation \n
+ * BLUETOOTH_ERROR_NOT_PAIRED - Not paired device \n
+ * BLUETOOTH_ERROR_NOT_IN_OPERATION - Searching service is not in operation \n
+ *
+ * @remark None
+ * @see bluetooth_search_service
+@code
+...
+
+int ret = 0;
+ret = bluetooth_cancel_service_search();
+@endcode
+*/
+int bluetooth_cancel_service_search(void);
+
+/**
+ * @fn int bluetooth_rfcomm_create_socket(const char *uuid)
+ * @brief Register rfcomm socket with a specific uuid
+ *
+ *
+ * This API register rfcomm socket with the given UUID. The return value of this API is the socket
+ * descriptor of the server.
+ * This is the first API which is called to create the server. Once we created the server socket,
+ * we will listen on that return socket.
+ * So a bluetooth_rfcomm_listen_and_accept should follow this API call. This is a synchronous call.
+ *
+ *
+ * @return socket FD on Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal error\n
+ * BLUETOOTH_ERROR_MAX_CONNECTION - Maximum connection reached\n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * @param[in] UUID (128 bits)
+ *
+ * @remark None
+ * @see bluetooth_rfcomm_listen_and_accept, bluetooth_rfcomm_remove_socket
+ *
+ @code
+
+ const char *rfcomm_test_uuid="00001101-0000-1000-8000-00805F9B34FB";
+ fd = bluetooth_rfcomm_create_socket(rfcomm_test_uuid);
+
+ @endcode
+ */
+int bluetooth_rfcomm_create_socket(const char *uuid);
+
+/**
+ * @fn int bluetooth_rfcomm_remove_socket(int socket_fd, const char *uuid)
+ * @brief De-register the rfcomm socket
+ *
+ *
+ * This API deregister rfcomm socket with the given socket fd and UUID. If the remote device is
+ * already connected then we will receive the BLUETOOTH_EVENT_RFCOMM_DISCONNECTED with socket
+ * descriptor else no event will come. We will call this API only after the
+ * bluetooth_rfcomm_listen_and_accept.
+ * This is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_NOT_FOUND - Cannot find the proxy\n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * @param[in] int socket_fd
+ *
+ * @remark None
+ * @see bluetooth_rfcomm_create_socket, bluetooth_rfcomm_listen_and_accept
+ *
+ @code
+ void bt_event_callback(int event, bluetooth_event_param_t *param)
+ {
+ switch(event)
+ {
+ case BLUETOOTH_EVENT_RFCOMM_DISCONNECTED:
+ {
+ bluetooth_rfcomm_connection_t *discon_ind =
+ (bluetooth_rfcomm_connection_t *)param->param_data;
+
+ printf("\nDisconnected from FD %d", discon_ind->socket_fd);
+ }
+ }
+ }
+
+ ...
+
+ int ret = 0;
+ fd = bluetooth_rfcomm_create_socket(rfcomm_test_uuid);
+ ret = bluetooth_rfcomm_listen_and_accept(fd, 1);
+ ....
+ ret = bluetooth_rfcomm_remove_socket(fd);
+ @endcode
+ */
+int bluetooth_rfcomm_remove_socket(int socket_fd);
+
+/**
+ * @fn int bluetooth_rfcomm_server_disconnect(int socket_fd)
+ * @brief Disconnect rfcomm connection
+ *
+ *
+ * Disconnect a specific(device node fd) RFCOMM connection. This is a Synchronous call and there
+ * is no cabbback events for this API. We have to provice the valid client fd to disconnect from the
+ * remote server.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_NOT_CONNECTED - Not connected \n
+ * @param[in] int socket_fd the sending socket fd
+ *
+ * @remark None
+ *
+ @code
+
+ ret = bluetooth_rfcomm_server_disconnect(g_ret_fd);
+ if (ret < 0)
+ printf("Disconnection failed");
+ else
+ printf("Disconnection Success");
+
+ @endcode
+ */
+int bluetooth_rfcomm_server_disconnect(int socket_fd);
+
+/**
+ * @fn int bluetooth_rfcomm_listen_and_accept(int socket_fd,int max_pending_connection)
+ * @brief Rfcomm socket listen
+ *
+ *
+ * This API make rfcomm socket listen and accept with socket. We will call this API immediatly
+ * after the bluetooth_rfcomm_create_socket API.
+ * This API listen for the incomming connection and once it receives a connection, it will give
+ * BLUETOOTH_EVENT_RFCOMM_CONNECTED
+ * event to the application. This is an Asynchronous API call.
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_CONNECTION_ERROR - Listen failed \n
+
+ * @param[in] int socket_fd
+ * @param[in] max pending connection.
+ *
+ * @remark None
+ * @see bluetooth_rfcomm_create_socket
+ *
+ @code
+ void bt_event_callback(int event, bluetooth_event_param_t* param)
+ {
+ switch(event)
+ {
+ case BLUETOOTH_EVENT_RFCOMM_CONNECTED:
+ {
+ bluetooth_rfcomm_connection_t *conn_ind =
+ (bluetooth_rfcomm_connection_t *)param->param_data;
+
+ printf("\nConnected from FD %d", conn_ind->socket_fd);
+ }
+ }
+ }
+
+ ...
+
+ int ret = 0;
+ fd = bluetooth_rfcomm_create_socket(rfcomm_test_uuid);
+ ret = bluetooth_rfcomm_listen_and_accept(fd, 1);
+
+ @endcode
+ */
+int bluetooth_rfcomm_listen_and_accept(int socket_fd, int max_pending_connection);
+
+/**
+ * @fn int bluetooth_rfcomm_listen(int socket_fd,int max_pending_connection)
+ * @brief Rfcomm socket listen
+ *
+ *
+ * This API make rfcomm socket listen and accept with socket. We will call this API immediatly
+ * after the bluetooth_rfcomm_create_socket API.
+ * This API listen for the incomming connection and once it receives a connection, it will give
+ * BLUETOOTH_EVENT_RFCOMM_AUTHORIZE
+ * event to the application. This is an Asynchronous API call.
+ *
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_CONNECTION_ERROR - Listen failed \n
+
+ * @param[in] int socket_fd
+ * @param[in] max pending connection.
+ *
+ * @remark None
+ * @see bluetooth_rfcomm_create_socket
+ *
+ @code
+ void bt_event_callback(int event, bluetooth_event_param_t* param)
+ {
+ switch(event)
+ {
+ case BLUETOOTH_EVENT_RFCOMM_AUTHORIZE:
+ {
+ char *name = (char *)param->param_data;
+
+ printf("\nConnected from %s", name);
+
+ bluetooth_rfcomm_accept_connection();
+ }
+ }
+ }
+
+ ...
+
+ int ret = 0;
+ fd = bluetooth_rfcomm_create_socket(rfcomm_test_uuid);
+ ret = bluetooth_rfcomm_listen(fd, 1);
+
+ @endcode
+ */
+int bluetooth_rfcomm_listen(int socket_fd, int max_pending_connection);
+
+/**
+ * @fn int bluetooth_rfcomm_accept_connection()
+ * @brief Accepts the authorization request indicated by the event
+ * BLUETOOTH_EVENT_RFCOMM_AUTHORIZE.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal error \n
+ *
+ * @param[in] the socket fd of the server
+ * @param[out] the socket fd of the client
+ *
+ * @exception None
+ * @remark None
+ * @see bluetooth_rfcomm_reject_connection
+ */
+int bluetooth_rfcomm_accept_connection(int server_fd, int *client_fd);
+
+/**
+ * @fn int bluetooth_rfcomm_reject_connection()
+ * @brief Rejects the authorization request indicated by the event
+ * BLUETOOTH_EVENT_RFCOMM_AUTHORIZE.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal error \n
+ *
+ * @param[in] the socket fd of the server
+ *
+ * @exception None
+ * @remark None
+ * @see bluetooth_rfcomm_accept_connection
+ */
+int bluetooth_rfcomm_reject_connection(int server_fd);
+
+/**
+ * @fn gboolean bluetooth_rfcomm_is_server_uuid_available(const char *uuid)
+ * @brief Informs whether rfcomm server uuid is available or not.
+ *
+ * This function is a synchronous call.
+ *
+ * @return TRUE - RFCOMM uuid is available \n
+ * FALSE - RFCOMM uuid is not available \n
+ *
+ * @param[in] uuid UUID string
+ *
+ * @exception None
+ *
+ * @remark None
+ */
+gboolean bluetooth_rfcomm_is_server_uuid_available(const char *uuid);
+
+/**
+ * @fn int bluetooth_rfcomm_connect(const bluetooth_device_address_t *remote_bt_address,
+ * const char *remote_uuid)
+ * @brief Connect to the remote device rfcomm *
+ *
+ * Connect to a specific RFCOMM based service on a remote device UUID. This is a Async call. Once
+ * the connection is successful callback BLUETOOTH_EVENT_RFCOMM_CONNECTED events is generated,
+ * which contains the socket_fd, device role (RFCOMM_ROLE_SERVER/RFCOMM_ROLE_CLIENT), device addess
+ * etc. The socket_fd can be further used to send the data. It better to do a sevice search before
+ * initiating a connection.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_CONNECTION_BUSY - Connection in progress \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error\n
+ * @param[in] bluetooth_device_address_t remote bt_address
+ * @param[in] char remote uuid
+ * @remark None
+ * @see bluetooth_rfcomm_disconnect, bluetooth_rfcomm_write, bluetooth_search_service
+ *
+ @code
+
+ void bt_event_callback(int event, bluetooth_event_param_t *param)
+ {
+ switch(event)
+ {
+ case BLUETOOTH_EVENT_SERVICE_SEARCHED:
+ {
+ if (param->result >= BLUETOOTH_ERROR_NONE)
+ {
+ bt_sdp_info_t *bt_sdp_info=param->param_data;
+
+ printf("Dev add = %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
+ bt_sdp_info->device_addr.addr[0],
+ bt_sdp_info->device_addr.addr[1],
+ bt_sdp_info->device_addr.addr[2],
+ bt_sdp_info->device_addr.addr[3],
+ bt_sdp_info->device_addr.addr[4],
+ bt_sdp_info->device_addr.addr[5]);
+
+ printf("Supported service list:\n");
+ for(i=0; i<bt_sdp_info->service_index; i++)
+ printf("[%#x]\n",
+ bt_sdp_info->service_list_array[i]);
+
+ //Alternate method
+ //ret = bluetooth_rfcomm_connect(bt_sdp_info->device_addr,
+ //rfcomm_test_uuid);
+ }
+ break;
+ }
+ case BLUETOOTH_EVENT_RFCOMM_CONNECTED:
+ {
+ bluetooth_rfcomm_connection_t *conn_ind =
+ (bluetooth_rfcomm_connection_t *)param->param_data;
+
+ printf("\nConnected from FD %d, Role = %s", conn_ind->socket_fd,
+ (conn_ind->device_role == RFCOMM_ROLE_SERVER) ?
+ "SERVER" : "CLIENT");
+ }
+ }
+ }
+
+ bluetooth_device_address_t remote_address = {{0},};
+ remote_address.addr[0] = 0x0; remote_address.addr[1] = 0x0A; remote_address.addr[2] = 0x3A;
+ remote_address.addr[3]= 0x54; remote_address.addr[4] = 0x19; remote_address.addr[5]= 0x36;
+ ret = bluetooth_search_service(&remote_address);
+ if (ret < 0)
+ printf("Seach failed, Reason = %d", ret);
+ else
+ printf("Search Success, Ret = %d", ret);
+
+ ret = bluetooth_rfcomm_connect(&remote_address, rfcomm_test_uuid);
+ if (ret < 0)
+ printf("Connection failed, Reason = %d", ret);
+ else
+ printf("Connection Success, Ret = %d", ret);
+
+ @endcode
+ */
+int bluetooth_rfcomm_connect(const bluetooth_device_address_t *remote_bt_address,
+ const char *remote_uuid);
+
+/**
+ * @fn int bluetooth_rfcomm_disconnect(int socket_fd)
+ * @brief Disconnect rfcomm connection
+ *
+ *
+ * Disconnect a specific(device node fd) RFCOMM connection. This is a Synchronous call and there
+ * is no cabbback events for this API. We have to provice the valid client fd to disconnect from the
+ * remote server.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_NOT_CONNECTED - Not connected \n
+ * @param[in] char remote bt_address
+ *
+ * @remark None
+ * @see bluetooth_rfcomm_connect
+ *
+ @code
+
+ ret = bluetooth_rfcomm_disconnect(g_ret_fd);
+ if (ret < 0)
+ printf("Disconnection failed");
+ else
+ printf("Disconnection Success");
+
+ @endcode
+ */
+
+int bluetooth_rfcomm_disconnect(int socket_fd);
+
+/**
+ * @fn int bluetooth_rfcomm_write (int fd, const char *buff, int length)
+ * @brief Write to rfcomm connection
+ *
+ *
+ * This API is used to send the data over the rfcomm connection. This is a synchronous API. The same
+ * API is used to send the data for server and the client.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_NOT_IN_OPERATION - The Fd is currently not in operation\n
+ * @param[in] int fd
+ * @param[in] const char *buff Data buffer to send
+ * @param[in] int length Length of the data
+ *
+ * @remark None
+ * @see bluetooth_rfcomm_connect
+ *
+ @code
+ char *buff = "Test data 123456789"
+ ret = bluetooth_rfcomm_write(g_ret_fd, buff, 15);
+ if (ret < 0)
+ printf("Send failed");
+ else
+ printf("Send success");
+
+ @endcode
+ */
+int bluetooth_rfcomm_write(int fd, const char *buf, int length);
+
+/**
+ * @fn gboolean bluetooth_rfcomm_is_client_connected(void)
+ * @brief Informs whether rfcomm client is connected.
+ *
+ * This function is a synchronous call.
+ *
+ * @return TRUE - RFCOMM client is connected \n
+ * FALSE - RFCOMM client is not connected \n
+ *
+ * @exception None
+ *
+ * @remark None
+ */
+gboolean bluetooth_rfcomm_is_client_connected(void);
+
+/**
+ * @fn int bluetooth_network_activate_server(void)
+ * @brief Activate the NAP (Network Access Point) service
+ *
+ * This function is a asynchronous call.
+ * The activate server request is responded by BLUETOOTH_EVENT_NETWORK_SERVER_ACTIVATED event.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
+ *
+ * @remark None
+ * @see bluetooth_network_deactivate_server
+ *
+ */
+int bluetooth_network_activate_server(void);
+
+/**
+ * @fn int bluetooth_network_deactivate_server(void)
+ * @brief Deactivate the NAP (Network Access Point) service
+ *
+ * This function is a asynchronous call.
+ * The deactivate server request is responded by BLUETOOTH_EVENT_NETWORK_SERVER_DEACTIVATED event.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
+ *
+ * @remark None
+ * @see bluetooth_network_activate_server
+ *
+ */
+int bluetooth_network_deactivate_server(void);
+
+/**
+ * @fn int bluetooth_network_connect(const bluetooth_device_address_t *device_address,
+ * bluetooth_network_role_t role,
+ * char custom_uuid)
+ * @brief Connect the network server in the peer
+ *
+ * This function is a asynchronous call.
+ * The network connect request is responded by BLUETOOTH_EVENT_NETWORK_CONNECTED event.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
+ *
+ * @exception None
+ * @param[in] device_address This indicates an address of the device with which the pairing
+ * should be initiated
+ * @param[in] role The role to connect. PANU / GN / NAP / CUSTOM. If use the CUSTOM value,
+ * need to use the third parameter.
+ * @param[in] custom_uuid If use the CUSTOM value in second parameter, use this parameter to
+ * connect. UUID string
+ * @remark None
+ * @see bluetooth_network_disconnect
+ */
+int bluetooth_network_connect(const bluetooth_device_address_t *device_address,
+ bluetooth_network_role_t role, char *custom_uuid);
+
+/**
+ * @fn int bluetooth_network_disconnect(const bluetooth_device_address_t *device_address,
+ * bluetooth_network_role_t role,
+ * char *custom_uuid)
+ * @brief Connect the network server in the peer
+ *
+ * This function is a asynchronous call.
+ * The network disconnect request is responded by BLUETOOTH_EVENT_NETWORK_CONNECTED event.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
+ *
+ * @exception None
+ * @param[in] device_address This indicates an address of the device with which the pairing
+ * should be initiated
+ * @remark None
+ * @see bluetooth_network_connect
+ */
+int bluetooth_network_disconnect(const bluetooth_device_address_t *device_address);
+
+/*HDP - API's*/
+
+/**
+ * @fn int bluetooth_hdp_activate(unsigned short data_type,
+ * bt_hdp_role_type_t role,
+ * bt_hdp_qos_type_t channel_type,
+ * char **app_handle)
+ * @brief Activate the HDP service for a particular data type
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ *
+ * @exception None
+ * @param[in] data_type The data type against corresponding service
+ * @param[in] role The role of HDP. HDP_ROLE_SOURCE/HDP_ROLE_SINK.
+ * @param[in] channel_type The QOS type for the channel.
+ * HDP_QOS_RELIABLE/HDP_QOS_STREAMING/HDP_QOS_ANY.
+ * For role = HDP_ROLE_SINK, the channel_type
+ * should be HDP_QOS_ANY.
+ * @param[out] app_handle The application handler against corresponding service
+ * @remark None
+ * @see bluetooth_hdp_deactivate
+ */
+int bluetooth_hdp_activate(unsigned short data_type,
+ bt_hdp_role_type_t role,
+ bt_hdp_qos_type_t channel_type,
+ char **app_handle);
+/**
+ * @fn int bluetooth_hdp_deactivate(const char *app_handle)
+ * @brief Deactivate the HDP service for a particular service using the handler
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ *
+ * @exception None
+ * @param[in] app_handle The application handler against corresponding service
+ * @remark None
+ * @see bluetooth_hdp_deactivate
+ */
+int bluetooth_hdp_deactivate(const char *app_handle);
+
+/**
+ * @fn int bluetooth_hdp_send_data(unsigned int channel_id,
+ * const char *buffer, unsigned int size)
+ * @brief Send data to the remote HDP device
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ * BLUETOOTH_ERROR_NOT_IN_OPERATION - FD is invalid \n
+ *
+ * @exception None
+ * @param[in] channel_id The channel id for the connection.
+ * @param[in] buffer The pdu buffer.
+ * @param[in] size Size of the buffer.
+ * @remark None
+ * @see bluetooth_hdp_connect
+ */
+int bluetooth_hdp_send_data(unsigned int channel_id,
+ const char *buffer, unsigned int size);
+/**
+ * @fn int bluetooth_hdp_connect(const char *app_handle,
+ * bt_hdp_qos_type_t channel_type,
+ * const bluetooth_device_address_t *device_address)
+ * @brief Connect to the remote device(Mainly used by source)
+ *
+ * This function is a asynchronous call.
+ * The HDP activate is responded by BLUETOOTH_EVENT_HDP_CONNECTED event.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ * BLUETOOTH_ERROR_MEMORY_ALLOCATION -Memory allocation failed \n
+ *
+ * @exception None
+ * @param[in] app_handle The application handler against corresponding service
+ * @param[in] channel_type The QOS type for the channel.
+ * HDP_QOS_RELIABLE/HDP_QOS_STREAMING.
+ * @param[in] device_address The remote device Bd address.
+ *
+ * @remark None
+ * @see bluetooth_hdp_disconnect
+ */
+int bluetooth_hdp_connect(const char *app_handle,
+ bt_hdp_qos_type_t channel_type,
+ const bluetooth_device_address_t *device_address);
+/**
+ * @fn int bluetooth_hdp_disconnect(unsigned int channel_id,
+ * const bluetooth_device_address_t *device_address)
+ * @brief Disconnect from the remote device(Mainly used by source)
+ *
+ * This function is a asynchronous call.
+ * The HDP activate is responded by BLUETOOTH_EVENT_HDP_DISCONNECTED event.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ * BLUETOOTH_ERROR_MEMORY_ALLOCATION -Memory allocation failed \n
+ *
+ * @exception None
+ * @param[in] channel_id The channel id for the connection.
+ * @param[in] device_address The remote device Bd address.
+ *
+ * @remark None
+ * @see bluetooth_hdp_connect
+ */
+int bluetooth_hdp_disconnect(unsigned int channel_id,
+ const bluetooth_device_address_t *device_address);
+
+
+/**
+ * @fn int bluetooth_opc_init(void)
+ * @brief Initialize OPP client.
+ *
+ * This function is a synchronous call.
+ * No event corresponding to this api
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ * BLUETOOTH_ERROR_ACCESS_DENIED -Memory allocation failed \n
+ *
+ * @exception None
+ *
+ * @remark None
+ * @see bluetooth_opc_deinit
+ */
+int bluetooth_opc_init(void);
+
+/**
+ * @fn int bluetooth_opc_deinit(void)
+ * @brief Deinitialize OPP client.
+ *
+ * This function is a synchronous call.
+ * No event corresponding to this api
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_ACCESS_DENIED -Memory allocation failed \n
+ *
+ * @exception None
+ *
+ * @remark None
+ * @see bluetooth_opc_init
+ */
+
+ int bluetooth_opc_deinit(void);
+
+/**
+ * @fn int bluetooth_opc_push_files(bluetooth_device_address_t *remote_address,
+ char **file_name_array)
+ * @brief Send multiple files to a remote device.
+ *
+ * This function is a asynchronous call.
+ * This api is responded by BLUETOOTH_EVENT_OPC_CONNECTED event.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ * BLUETOOTH_ERROR_IN_PROGRESS -Already one push in progress \n
+ * BLUETOOTH_ERROR_ACCESS_DENIED - Not allowed by MDM policy \n
+ *
+ * @exception None
+ * @param[in] device_address The remote device Bd address.
+ * @param[in] file_name_array Array of filepaths to be sent.
+ *
+ * @remark None
+ * @see bluetooth_opc_cancel_push
+ */
+
+int bluetooth_opc_push_files(bluetooth_device_address_t *remote_address,
+ char **file_name_array);
+
+/**
+ * @fn int bluetooth_opc_cancel_push(void)
+ * @brief Cancels the ongoing file push.
+ *
+ * This function is a asynchronous call.
+ * This api is responded with either BLUETOOTH_EVENT_OPC_CONNECTED or
+ * BLUETOOTH_EVENT_OPC_TRANSFER_COMPLETED event.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_ACCESS_DENIED - No push in progress \n
+ *
+ * @exception None
+ *
+ * @remark None
+ * @see bluetooth_opc_push_files
+ */
+
+int bluetooth_opc_cancel_push(void);
+
+/**
+ * @fn gboolean bluetooth_opc_session_is_exist(void)
+ * @brief Informs whether opc session exists or not.
+ *
+ * This function is a synchronous call.
+ *
+ * @return TRUE - OPC session exists \n
+ * FALSE - OPC session does not exist \n
+ *
+ * @exception None
+ *
+ * @remark None
+ * @see None
+ */
+
+gboolean bluetooth_opc_session_is_exist(void);
+
+/**
+ * @fn int bluetooth_opc_is_sending(gboolean *is_sending)
+ * @brief Informs whether opc session exists or not.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
+ * BLUETOOTH_ERROR_INTERNAL \n
+ *
+ * @exception None
+ * @param[out] is_sending The sending status: (@c TRUE = in sending , @c false = not in sending)
+ *
+ * @remark None
+ * @see None
+ */
+int bluetooth_opc_is_sending(gboolean *is_sending);
+
+/**
+ * @fn int bluetooth_obex_server_init(const char *dst_path)
+ * @brief Initialize OPP and FTP server.
+ *
+ * This function is a synchronous call.
+ * No event corresponding to this api
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ * BLUETOOTH_ERROR_AGENT_ALREADY_EXIST - Obex agent already registered \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ *
+ * @exception None
+ * @param[in] dst_path OPS destination file path.
+ * @remark None
+ * @see bluetooth_obex_server_deinit
+ */
+int bluetooth_obex_server_init(const char *dst_path);
+
+
+/**
+ * @fn int bluetooth_obex_server_deinit(void)
+ * @brief Deinitialize OPP and FTP server.
+ *
+ * This function is a synchronous call.
+ * No event corresponding to this api
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
+ *
+ * @exception None
+ *
+ * @remark None
+ * @see bluetooth_obex_server_init
+ */
+int bluetooth_obex_server_deinit(void);
+
+
+/**
+ * @fn gboolean bluetooth_obex_server_is_activated(void)
+ * @brief Informs whether obex server is activated or not.
+ *
+ * This function is a synchronous call.
+ *
+ * @return TRUE - OBEX server is activated \n
+ * FALSE - OBEX server is not activated \n
+ *
+ * @exception None
+ *
+ * @remark None
+ */
+
+gboolean bluetooth_obex_server_is_activated(void);
+
+
+/**
+ * @fn int bluetooth_obex_server_init_without_agent(const char *dst_path)
+ * @brief Initialize OPP and FTP server without the conneciton authorization of the agent
+ *
+ * This function is a synchronous call.
+ * No event corresponding to this api
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ * BLUETOOTH_ERROR_AGENT_ALREADY_EXIST - Obex agent already registered \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ *
+ *
+ * @exception None
+ * @param[in] dst_path OPS destination file path.
+ * @remark None
+ * @see bluetooth_obex_server_deinit_without_agent
+ */
+int bluetooth_obex_server_init_without_agent(const char *dst_path);
+
+
+/**
+ * @fn int bluetooth_obex_server_deinit_without_agent(void)
+ * @brief Deinitialize OPP and FTP server without the conneciton authorization of the agent
+ *
+ * This function is a synchronous call.
+ * No event corresponding to this api
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
+ *
+ * @exception None
+ *
+ * @remark None
+ * @see bluetooth_obex_server_init_without_agent
+ */
+int bluetooth_obex_server_deinit_without_agent(void);
+
+
+/**
+ * @fn int bluetooth_obex_server_accept_connection(void)
+ * @brief Accepts the authorization request indicated by the event
+ * BLUETOOTH_EVENT_OBEX_SERVER_CONNECTION_AUTHORIZE.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal error \n
+ *
+ * @exception None
+ * @remark None
+ * @see bluetooth_obex_server_reject_authorize
+ */
+int bluetooth_obex_server_accept_connection(void);
+
+
+/**
+ * @fn int bluetooth_obex_server_reject_connection(void)
+ * @brief Rejects the authorization request indicated by the event
+ * BLUETOOTH_EVENT_OBEX_SERVER_CONNECTION_AUTHORIZE.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal error \n
+ *
+ * @exception None
+ * @remark None
+ * @see bluetooth_obex_server_reject_authorize
+ */
+int bluetooth_obex_server_reject_connection(void);
+
+
+/**
+ * @fn int bluetooth_obex_server_accept_authorize(const char *filename)
+ * @brief Accepts the authorization request indicated by the event
+ * BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_AUTHORIZE.
+ *
+ * This function is a asynchronous call.
+ * This api will be responded with the event BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_STARTED.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
+ *
+ * @exception None
+ * @param[in] filename Authorized filename.
+
+ * @remark None
+ * @see bluetooth_obex_server_reject_authorize
+ */
+
+int bluetooth_obex_server_accept_authorize(const char *filename);
+
+/**
+ * @fn int bluetooth_obex_server_reject_authorize(void)
+ * @brief Reject the authorization request indicated by the event
+ * BLUETOOTH_EVENT_OBEX_SERVER_TRANSFER_AUTHORIZE.
+ *
+ * This function is a asynchronous call.
+ * No event for this api..
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
+ *
+ * @exception None
+
+ * @remark None
+ * @see bluetooth_obex_server_accept_authorize
+ */
+
+int bluetooth_obex_server_reject_authorize(void);
+
+/**
+ * @fn int bluetooth_obex_server_set_destination_path(const char *dst_path)
+ * @brief Set the OPS destination file path..
+ *
+ * This function is a asynchronous call.
+ * No event for this api..
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid Param \n
+ *
+ * @exception None
+ * @param[in] dst_path OPS destination file path.
+
+ * @remark None
+ * @see None
+ */
+
+int bluetooth_obex_server_set_destination_path(const char *dst_path);
+
+/**
+ * @fn int bluetooth_obex_server_set_root(const char *root)
+ * @brief Set the FTS root folder..
+ *
+ * This function is a asynchronous call.
+ * No event for this api..
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Device is not enabled \n
+ * BLUETOOTH_ERROR_NO_RESOURCES - Not resource available \n
+ * BLUETOOTH_ERROR_ACCESS_DENIED - Operation not allowed \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ *
+ * @exception None
+ * @param[in] root FTS root folder.
+
+ * @remark None
+ * @see None
+ */
+
+int bluetooth_obex_server_set_root(const char *root);
+
+/**
+ * @fn int bluetooth_obex_server_cancel_transfer(int transfer_id)
+ * @brief Cancel the transfer on server
+ *
+ * This function is an asynchronous call.
+ * If the function call that cancels transfer is successful, the application would receive
+ * BLUETOOTH_EVENT_TRANSFER_COMPLETED event through registered callback
+ * function with an error code BLUETOOTH_ERROR_CANCEL. In the case of failure
+ * the error code will be BLUETOOTH_ERROR_NONE
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
+ * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
+ * BLUETOOTH_ERROR_INTERNAL - internal error (proxy does not exist) \n
+ * BLUETOOTH_ERROR_NOT_FOUND - The transfer is not found \n
+ *
+ * @exception None
+ * @param[in] transfer_id transfer ID
+
+ * @remark None
+ * @see None
+ */
+int bluetooth_obex_server_cancel_transfer(int transfer_id);
+
+
+/**
+ * @fn int bluetooth_obex_server_cancel_all_transfers(void)
+ * @brief Cancel the transfer on server
+ *
+ * This function is an asynchronous call.
+ * If the function call that cancels transfer is successful, the application would receive
+ * BLUETOOTH_EVENT_TRANSFER_COMPLETED event through registered callback
+ * function with an error code BLUETOOTH_ERROR_CANCEL. In the case of failure
+ * the error code will be BLUETOOTH_ERROR_NONE
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
+ * BLUETOOTH_ERROR_AGENT_DOES_NOT_EXIST -Obex agent not registered \n
+ * BLUETOOTH_ERROR_INTERNAL - internal error (proxy does not exist) \n
+ * BLUETOOTH_ERROR_NOT_FOUND - The transfer is not found \n
+ *
+ * @exception None
+ *
+ * @remark None
+ * @see None
+ */
+int bluetooth_obex_server_cancel_all_transfers(void);
+
+
+/**
+ * @fn int bluetooth_obex_server_is_receiving(gboolean *is_receiving)
+ * @brief Informs whether obex server is receiving or not.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Not enabled \n
+ * BLUETOOTH_ERROR_INTERNAL \n
+ *
+ * @exception None
+ * @param[out] is_receiving The receiving status: (@c TRUE = in receiving , @c false = not in receiving)
+ *
+ * @remark None
+ * @see None
+ */
+int bluetooth_obex_server_is_receiving(gboolean *is_receiving);
+
+
+/**
+ * @fn int bluetooth_oob_read_local_data(bt_oob_data_t *local_oob_data)
+ * @brief Read the local Hash and Randmizer.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ *
+ * @exception None
+ * @param[in] None.
+ * @param[out] local_oob_data - Pointer to the local OOB data
+ *
+ * @remark None
+ * @see None
+ */
+
+int bluetooth_oob_read_local_data(bt_oob_data_t *local_oob_data);
+
+
+/**
+ * @fn int bluetooth_oob_add_remote_data(
+ * const bluetooth_device_address_t *remote_device_address,
+ * bt_oob_data_t *oob_data)
+ * @brief Add/updated the remote device Hash and Randmizer.
+ *
+ * This function is a synchronous call.
+ * No event for this api..
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ *
+ * @exception None
+ * @param[in] remote_device_address - Remote device address
+ * remote_oob_data - Ponter to Hash and Randomizer oob data structure
+ *
+ * @remark None
+ * @see None
+ */
+
+int bluetooth_oob_add_remote_data(
+ const bluetooth_device_address_t *remote_device_address,
+ bt_oob_data_t *remote_oob_data);
+
+
+/**
+ * @fn int bluetooth_oob_remove_remote_data(
+ * const bluetooth_device_address_t *remote_device_address)
+ * @brief Delete the Hash and Randomizer w.r.t the remote device address.
+ *
+ * This function is a synchronous call.
+ * No event for this api..
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ *
+ * @exception None
+ * @param[in] remote_device_address - Remote device address
+ *
+ * @remark None
+ * @see None
+ */
+
+int bluetooth_oob_remove_remote_data(
+ const bluetooth_device_address_t *remote_device_address);
+
+/**
+ * @fn int bluetooth_gatt_get_primary_services(const bluetooth_device_address_t *address,
+ * bt_gatt_handle_info_t *prim_svc);
+ *
+ * @brief Gets the GATT based primary services handle supported by remote device
+ *
+ * This function is a synchronous call.
+ * The output parameter needs to be freed by calling bluetooth_gatt_free_primary_services()
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
+ *
+ * @exception None
+ * @param[in] address - Remote device address
+ * @param[out] prim_svc - Structure containing remote service count and handle list.
+ *
+ * @remark None
+ * @see bluetooth_gatt_free_primary_services()
+ */
+int bluetooth_gatt_get_primary_services(const bluetooth_device_address_t *address,
+ bt_gatt_handle_info_t *prim_svc);
+
+/**
+ * @fn int bluetooth_gatt_discover_service_characteristics(const char *service_handle)
+ *
+ * @brief Discovers the characteristics of GATT based service of remote device
+ *
+ * This function is an asynchronous call.
+ * This API is responded with BLUETOOTH_EVENT_GATT_SVC_CHAR_DISCOVERED
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
+ *
+ * @exception None
+ * @param[in] service_handle - Handle for remote service.
+ *
+ * @remark None
+ * @see None
+ */
+int bluetooth_gatt_discover_service_characteristics(const char *service_handle);
+
+/**
+ * @fn int bluetooth_gatt_get_service_property(const char *service_handle,
+ * bt_gatt_service_property_t *service);
+ *
+ * @brief Gets the properties of GATT based service of remote device
+ *
+ * This function is a synchronous call.
+ * The output parameter needs to be freed by calling bluetooth_gatt_free_primary_services()
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
+ *
+ * @exception None
+ * @param[in] service_handle - Handle for remote service.
+ * @param[out] service - Structure containing remote service property.
+ *
+ * @remark None
+ * @see bluetooth_gatt_free_service_property()
+ */
+int bluetooth_gatt_get_service_property(const char *service_handle,
+ bt_gatt_service_property_t *service);
+
+/**
+ * @fn int bluetooth_gatt_watch_characteristics(const char *service_handle)
+ *
+ * @brief Register to GATT based service to receive value change notification/indication.
+ *
+ * This function is a synchronous call.
+ * No event for this api.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
+ *
+ * @exception None
+ * @param[in] service_handle - Handle for remote service.
+ *
+ * @remark None
+ * @see None
+ */
+int bluetooth_gatt_watch_characteristics(const char *service_handle);
+
+/**
+ * @fn int bluetooth_gatt_unwatch_characteristics(const char *service_handle)
+ *
+ * @brief Unregister GATT based service to receive value change notification/indication.
+ *
+ * This function is a synchronous call.
+ * No event for this api.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
+ *
+ * @exception None
+ * @param[in] service_handle - Handle for remote service.
+ *
+ * @remark None
+ * @see None
+ */
+int bluetooth_gatt_unwatch_characteristics(const char *service_handle);
+
+/**
+ * @fn int bluetooth_gatt_get_characteristics_property(const char *char_handle,
+ * bt_gatt_char_property_t *characteristic);
+ *
+ * @brief Provides characteristic value along with properties.
+ *
+ * This function is a synchronous call.
+ * The output parameter needs to be freed by calling bluetooth_gatt_free_char_property()
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
+ *
+ * @exception None
+ * @param[in] char_handle - Handle for Characteristic property.
+ * @param[out] characteristic - Structure containing remote characteristic property.
+ *
+ * @remark None
+ * @see bluetooth_gatt_free_char_property()
+ */
+int bluetooth_gatt_get_characteristics_property(const char *char_handle,
+ bt_gatt_char_property_t *characteristic);
+
+/**
+ * @fn int bluetooth_gatt_set_characteristics_value(const char *char_handle,
+ * const guint8 *value, int length)
+ *
+ * @brief Set characteristic value.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
+ *
+ * @exception None
+ * @param[in] char_handle - Handle for Characteristic property.
+ * @param[in] value - New value to set for characteristic property.
+ * @param[in] length - Length of the value to be set.
+ *
+ * @remark None
+ * @see None
+ */
+int bluetooth_gatt_set_characteristics_value(const char *char_handle,
+ const guint8 *value, int length);
+
+/**
+ * @fn int bluetooth_gatt_get_service_from_uuid(bluetooth_device_address_t *address,
+ * const char *service_uuid,
+ * bt_gatt_service_property_t *service)
+ *
+ * @brief Gets the service property from a device based on a particular uuid
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
+ *
+ * @exception None
+ * @param[in] address - BD address of the remote device
+ * @param[in] service_uuid - uuid of the service.
+ * @param[out] service - Structure containing the service property.
+ *
+ * @remark None
+ * @see None
+ */
+ int bluetooth_gatt_get_service_from_uuid(bluetooth_device_address_t *address,
+ const char *service_uuid,
+ bt_gatt_service_property_t *service);
+
+/**
+ * @fn int bluetooth_gatt_get_char_from_uuid(const char *service_handle,
+ * const char *char_uuid)
+ *
+ * @brief Gets the characteristic property from a service based on a particular char uuid
+ *
+ * This function is an asynchronous call.
+ * This API is responded with BLUETOOTH_EVENT_GATT_GET_CHAR_FROM_UUID
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
+ *
+ * @exception None
+ * @param[in] service_handle - Service handle.
+ * @param[in] uuid - Characteristic uuid.
+ *
+ * @remark None
+ * @see None
+ */
+int bluetooth_gatt_get_char_from_uuid(const char *service_handle,
+ const char *char_uuid);
+
+/**
+ * @fn int bluetooth_gatt_free_primary_services(bt_gatt_handle_info_t *prim_svc);
+ *
+ * @brief Releases the memory allocated by bluetooth_gatt_get_primary_services()
+ *
+ * This function is a synchronous call.
+ * The input parameter is obtained by calling bluetooth_gatt_get_primary_services()
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
+ *
+ * @exception None
+ * @param[in] prim_svc - GATT handle info structure
+ *
+ * @remark None
+ * @see bluetooth_gatt_get_primary_services()
+ */
+int bluetooth_gatt_free_primary_services(bt_gatt_handle_info_t *prim_svc);
+
+/**
+ * @fn int bluetooth_gatt_free_service_property(bt_gatt_service_property_t *svc_pty);
+ *
+ * @brief Releases the memory allocated by bluetooth_gatt_get_service_property()
+ *
+ * This function is a synchronous call.
+ * The input parameter is obtained by calling bluetooth_gatt_get_service_property()
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
+ *
+ * @exception None
+ * @param[in] svc_pty - GATT service property structure.
+ *
+ * @remark None
+ * @see bluetooth_gatt_get_service_property()
+ */
+int bluetooth_gatt_free_service_property(bt_gatt_service_property_t *svc_pty);
+
+/**
+ * @fn int bluetooth_gatt_free_char_property(bt_gatt_char_property_t *char_pty);
+ *
+ * @brief Provides characteristic value along with properties.
+ *
+ * This function is a synchronous call.
+ * The input parameter is obtained by calling bluetooth_gatt_get_characteristics_property()
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INVALID_PARAM -Invalid Parameters \n
+ *
+ * @exception None
+ * @param[in] char_pty - GATT characteristics property structure.
+ *
+ * @remark None
+ * @see bluetooth_gatt_get_characteristics_property()
+ */
+ int bluetooth_gatt_free_char_property(bt_gatt_char_property_t *char_pty);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+#endif /* _BLUETOOTH_API_H_*/
projects / platform / core / connectivity / bluetooth-frwk.git / commitdiff