GET_THREAD_SIGNALS): New defines.
* config/i386/linux.mh (NATDEPFILES): Remove lin-thread.o and
linux-threads.o. Add proc-service.o, thread-db.o and lin-lwp.o.
* proc-service.c: New file.
* thread-db.c: New file.
* lin-lwp.c: New file.
2000-09-03 Mark Kettenis <kettenis@gnu.org>
+ * config/i386/nm-linux.h (PREPARE_TO_PROCEED, ATTCH_LWP,
+ GET_THREAD_SIGNALS): New defines.
+ * config/i386/linux.mh (NATDEPFILES): Remove lin-thread.o and
+ linux-threads.o. Add proc-service.o, thread-db.o and lin-lwp.o.
+ * proc-service.c: New file.
+ * thread-db.c: New file.
+ * lin-lwp.c: New file.
+
* gdb_assert.h: New file.
* gdb_thread_db.h [HAVE_THREAD_DB_H]: Include <thread_db.h>.
NAT_FILE= nm-linux.h
NATDEPFILES= infptrace.o solib.o inftarg.o fork-child.o corelow.o \
- core-aout.o i386v-nat.o i386-linux-nat.o linux-thread.o lin-thread.o \
- i387-nat.o
+ core-aout.o i386v-nat.o i386-linux-nat.o i387-nat.o \
+ proc-service.o thread-db.o lin-lwp.o
LOADLIBES = -ldl -rdynamic
-/* Native support for GNU/Linux, for GDB, the GNU debugger.
- Copyright (C) 1986, 1987, 1989, 1992, 1996, 1998, 2000
+/* Native support for Linux/x86.
+ Copyright 1986, 1987, 1989, 1992, 1996, 1998, 2000
Free Software Foundation, Inc.
This file is part of GDB.
extern int i386_insert_watchpoint (int pid, CORE_ADDR addr, int len, int rw);
extern int i386_remove_watchpoint (int pid, CORE_ADDR addr, int len);
-#endif /* #ifndef NM_LINUX_H */
+/* FIXME: kettenis/2000-09-03: This should be moved to ../nm-linux.h
+ once we have converted all Linux targets to use the new threads
+ stuff (without the #undef of course). */
+
+extern int lin_lwp_prepare_to_proceed (void);
+#undef PREPARE_TO_PROCEED
+#define PREPARE_TO_PROCEED(select_it) lin_lwp_prepare_to_proceed ()
+
+extern void lin_lwp_attach_lwp (int pid, int verbose);
+#define ATTACH_LWP(pid, verbose) lin_lwp_attach_lwp ((pid), (verbose))
+
+extern void lin_thread_get_thread_signals (sigset_t *mask);
+#define GET_THREAD_SIGNALS(mask) lin_thread_get_thread_signals (mask)
+
+#endif /* nm_linux.h */
--- /dev/null
+/* Multi-threaded debugging support for Linux (LWP layer).
+ Copyright 2000 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+#include "defs.h"
+
+#include "gdb_assert.h"
+#include <errno.h>
+#include <signal.h>
+#include <sys/ptrace.h>
+#include "gdb_wait.h"
+
+#include "gdbthread.h"
+#include "inferior.h"
+#include "target.h"
+
+#define DEBUG 1
+
+#if DEBUG
+extern const char *strsignal (int sig);
+#endif
+
+/* On Linux there are no real LWP's. The closest thing to LWP's are
+ processes sharing the same VM space. A multi-threaded process is
+ basically a group of such processes. However, such a grouping is
+ almost entirely a user-space issue; the kernel doesn't enforce such
+ a grouping at all (this might change in the future). In general,
+ we'll rely on the threads library (i.e. the LinuxThreads library)
+ to provide such a grouping.
+
+ It is perfectly well possible to write a multi-threaded application
+ without the assistance of a threads library, by using the clone
+ system call directly. This module should be able to give some
+ rudimentary support for debugging such applications if developers
+ specify the CLONE_PTRACE flag in the clone system call, and are
+ using Linux 2.4 or above.
+
+ Note that there are some peculiarities in Linux that affect this
+ code:
+
+ - In general one should specify the __WCLONE flag to waitpid in
+ order to make it report events for any of the cloned processes.
+ However, if a cloned process has exited the exit status is only
+ reported if the __WCLONE flag is absent.
+
+ - When a traced, cloned process exits and is waited for by the
+ debugger, the kernel reassigns it to the origional parent and
+ keeps it around as a "zombie". Somehow, the LinuxThreads library
+ doesn't notice this, which leads to the "zombie problem": When
+ debugged a multi-threaded process that spawns a lot of threads
+ will run out of processes, even if the threads exit, because the
+ "zombies" stay around. */
+
+/* Structure describing a LWP. */
+struct lwp_info
+{
+ /* The process id of the LWP. This is a combination of the LWP id
+ and overall process id. */
+ int pid;
+
+ /* Non-zero if we sent this LWP a SIGSTOP (but the LWP didn't report
+ it back yet). */
+ int signalled;
+
+ /* Non-zero if this LWP is stopped. */
+ int stopped;
+
+ /* If non-zero, a pending wait status. */
+ int status;
+
+ /* Non-zero if we were stepping this LWP. */
+ int step;
+
+ /* Next LWP in list. */
+ struct lwp_info *next;
+};
+
+/* List of known LWPs. */
+static struct lwp_info *lwp_list;
+
+/* Number of LWPs in the list. */
+static int num_lwps;
+
+/* Non-zero if we're running in "threaded" mode. */
+static int threaded;
+\f
+
+#ifndef TIDGET
+#define TIDGET(PID) (((PID) & 0x7fffffff) >> 16)
+#define PIDGET(PID) (((PID) & 0xffff))
+#define MERGEPID(PID, TID) (((PID) & 0xffff) | ((TID) << 16))
+#endif
+
+#define THREAD_FLAG 0x80000000
+#define is_lwp(pid) (((pid) & THREAD_FLAG) == 0 && TIDGET (pid))
+#define GET_LWP(pid) TIDGET (pid)
+#define GET_PID(pid) PIDGET (pid)
+#define BUILD_LWP(tid, pid) MERGEPID (pid, tid)
+
+#define is_cloned(pid) (GET_LWP (pid) != GET_PID (pid))
+
+/* If the last reported event was a SIGTRAP, this variable is set to
+ the process id of the LWP/thread that got it. */
+int trap_pid;
+\f
+
+/* This module's target-specific operations. */
+static struct target_ops lin_lwp_ops;
+
+/* The standard child operations. */
+extern struct target_ops child_ops;
+
+/* Signal mask for use with sigsuspend in lin_lwp_wait, initialized in
+ _initialize_lin_lwp. */
+static sigset_t suspend_mask;
+\f
+
+/* Prototypes for local functions. */
+static void lin_lwp_mourn_inferior (void);
+\f
+
+/* Initialize the list of LWPs. */
+
+static void
+init_lwp_list (void)
+{
+ struct lwp_info *lp, *lpnext;
+
+ for (lp = lwp_list; lp; lp = lpnext)
+ {
+ lpnext = lp->next;
+ free (lp);
+ }
+
+ lwp_list = NULL;
+ num_lwps = 0;
+ threaded = 0;
+}
+
+/* Add the LWP specified by PID to the list. If this causes the
+ number of LWPs to become larger than one, go into "threaded" mode.
+ Return a pointer to the structure describing the new LWP. */
+
+static struct lwp_info *
+add_lwp (int pid)
+{
+ struct lwp_info *lp;
+
+ gdb_assert (is_lwp (pid));
+
+ lp = (struct lwp_info *) xmalloc (sizeof (struct lwp_info));
+
+ memset (lp, 0, sizeof (struct lwp_info));
+
+ lp->pid = pid;
+
+ lp->next = lwp_list;
+ lwp_list = lp;
+ if (++num_lwps > 1)
+ threaded = 1;
+
+ return lp;
+}
+
+/* Remove the LWP specified by PID from the list. */
+
+static void
+delete_lwp (int pid)
+{
+ struct lwp_info *lp, *lpprev;
+
+ lpprev = NULL;
+
+ for (lp = lwp_list; lp; lpprev = lp, lp = lp->next)
+ if (lp->pid == pid)
+ break;
+
+ if (!lp)
+ return;
+
+ /* We don't go back to "non-threaded" mode if the number of threads
+ becomes less than two. */
+ num_lwps--;
+
+ if (lpprev)
+ lpprev->next = lp->next;
+ else
+ lwp_list = lp->next;
+
+ free (lp);
+}
+
+/* Return a pointer to the structure describing the LWP corresponding
+ to PID. If no corresponding LWP could be found, return NULL. */
+
+static struct lwp_info *
+find_lwp_pid (int pid)
+{
+ struct lwp_info *lp;
+
+ if (is_lwp (pid))
+ pid = GET_LWP (pid);
+
+ for (lp = lwp_list; lp; lp = lp->next)
+ if (pid == GET_LWP (lp->pid))
+ return lp;
+
+ return NULL;
+}
+
+/* Call CALLBACK with its second argument set to DATA for every LWP in
+ the list. If CALLBACK returns 1 for a particular LWP, return a
+ pointer to the structure describing that LWP immediately.
+ Otherwise return NULL. */
+
+struct lwp_info *
+iterate_over_lwps (int (*callback) (struct lwp_info *, void *), void *data)
+{
+ struct lwp_info *lp;
+
+ for (lp = lwp_list; lp; lp = lp->next)
+ if ((*callback) (lp, data))
+ return lp;
+
+ return NULL;
+}
+\f
+
+/* Helper functions. */
+
+static void
+restore_inferior_pid (void *arg)
+{
+ int *saved_pid_ptr = arg;
+ inferior_pid = *saved_pid_ptr;
+ free (arg);
+}
+
+static struct cleanup *
+save_inferior_pid (void)
+{
+ int *saved_pid_ptr;
+
+ saved_pid_ptr = xmalloc (sizeof (int));
+ *saved_pid_ptr = inferior_pid;
+ return make_cleanup (restore_inferior_pid, saved_pid_ptr);
+}
+\f
+
+/* Implementation of the PREPARE_TO_PROCEED hook for the Linux LWP layer. */
+
+int
+lin_lwp_prepare_to_proceed (void)
+{
+ if (trap_pid && inferior_pid != trap_pid)
+ {
+ /* Switched over from TRAP_PID. */
+ CORE_ADDR stop_pc = read_pc ();
+ CORE_ADDR trap_pc;
+
+ /* Avoid switching where it wouldn't do any good, i.e. if both
+ threads are at the same breakpoint. */
+ trap_pc = read_pc_pid (trap_pid);
+ if (trap_pc != stop_pc && breakpoint_here_p (trap_pc))
+ {
+ /* User hasn't deleted the breakpoint. Return non-zero, and
+ switch back to TRAP_PID. */
+ inferior_pid = trap_pid;
+
+ /* FIXME: Is this stuff really necessary? */
+ flush_cached_frames ();
+ registers_changed ();
+
+ return 1;
+ }
+ }
+
+ return 0;
+}
+\f
+
+#if 0
+static void
+lin_lwp_open (char *args, int from_tty)
+{
+ push_target (&lin_lwp_ops);
+}
+#endif
+
+/* Attach to the LWP specified by PID. If VERBOSE is non-zero, print
+ a message telling the user that a new LWP has been added to the
+ process. */
+
+void
+lin_lwp_attach_lwp (int pid, int verbose)
+{
+ struct lwp_info *lp;
+
+ gdb_assert (is_lwp (pid));
+
+ if (verbose)
+ printf_filtered ("[New %s]\n", target_pid_to_str (pid));
+
+ if (ptrace (PTRACE_ATTACH, GET_LWP (pid), 0, 0) < 0)
+ error ("Can't attach %s: %s", target_pid_to_str (pid), strerror (errno));
+
+ lp = add_lwp (pid);
+ lp->signalled = 1;
+}
+
+static void
+lin_lwp_attach (char *args, int from_tty)
+{
+ /* FIXME: We should probably accept a list of process id's, and
+ attach all of them. */
+ error("Not implemented yet");
+}
+
+static void
+lin_lwp_detach (char *args, int from_tty)
+{
+ /* FIXME: Provide implementation when we implement lin_lwp_attach. */
+ error ("Not implemented yet");
+}
+\f
+
+struct private_thread_info
+{
+ int lwpid;
+};
+
+/* Return non-zero if TP corresponds to the LWP specified by DATA
+ (which is assumed to be a pointer to a `struct lwp_info'. */
+
+static int
+find_lwp_callback (struct thread_info *tp, void *data)
+{
+ struct lwp_info *lp = data;
+
+ if (tp->private->lwpid == GET_LWP (lp->pid))
+ return 1;
+
+ return 0;
+}
+
+/* Resume LP. */
+
+static int
+resume_callback (struct lwp_info *lp, void *data)
+{
+ if (lp->stopped && lp->status == 0)
+ {
+ struct thread_info *tp;
+
+#if 1
+ /* FIXME: kettenis/2000-08-26: This should really be handled
+ properly by core GDB. */
+
+ tp = find_thread_pid (lp->pid);
+ if (tp == NULL)
+ tp = iterate_over_threads (find_lwp_callback, lp);
+ gdb_assert (tp);
+
+ /* If we were previously stepping the thread, and now continue
+ the thread we must invalidate the stepping range. However,
+ if there is a step_resume breakpoint for this thread, we must
+ preserve the stepping range to make it possible to continue
+ stepping once we hit it. */
+ if (tp->step_range_end && tp->step_resume_breakpoint == NULL)
+ {
+ gdb_assert (lp->step);
+ tp->step_range_start = tp->step_range_end = 0;
+ }
+#endif
+
+ child_resume (GET_LWP (lp->pid), 0, TARGET_SIGNAL_0);
+ lp->stopped = 0;
+ lp->step = 0;
+ }
+
+ return 0;
+}
+
+static void
+lin_lwp_resume (int pid, int step, enum target_signal signo)
+{
+ struct lwp_info *lp;
+ int resume_all;
+
+ /* Apparently the interpretation of PID is dependent on STEP: If
+ STEP is non-zero, a specific PID means `step only this process
+ id'. But if STEP is zero, then PID means `continue *all*
+ processes, but give the signal only to this one'. */
+ resume_all = (pid == -1) || !step;
+
+ /* If PID is -1, it's the current inferior that should be
+ handled special. */
+ if (pid == -1)
+ pid = inferior_pid;
+
+ lp = find_lwp_pid (pid);
+ if (lp)
+ {
+ pid = GET_LWP (lp->pid);
+
+ /* Mark LWP as not stopped to prevent it from being continued by
+ resume_callback. */
+ lp->stopped = 0;
+
+ /* Remember if we're stepping. */
+ lp->step = step;
+
+ /* If we have a pending wait status for this thread, there is no
+ point in resuming the process. */
+ if (lp->status)
+ {
+ /* FIXME: What should we do if we are supposed to continue
+ this thread with a signal? */
+ gdb_assert (signo == TARGET_SIGNAL_0);
+ return;
+ }
+ }
+
+ if (resume_all)
+ iterate_over_lwps (resume_callback, NULL);
+
+ child_resume (pid, step, signo);
+}
+\f
+
+/* Send a SIGSTOP to LP. */
+
+static int
+stop_callback (struct lwp_info *lp, void *data)
+{
+ if (! lp->stopped && ! lp->signalled)
+ {
+ int ret;
+
+ ret = kill (GET_LWP (lp->pid), SIGSTOP);
+ gdb_assert (ret == 0);
+
+ lp->signalled = 1;
+ gdb_assert (lp->status == 0);
+ }
+
+ return 0;
+}
+
+/* Wait until LP is stopped. */
+
+static int
+stop_wait_callback (struct lwp_info *lp, void *data)
+{
+ if (! lp->stopped && lp->signalled)
+ {
+ pid_t pid;
+ int status;
+
+ gdb_assert (lp->status == 0);
+
+ pid = waitpid (GET_LWP (lp->pid), &status,
+ is_cloned (lp->pid) ? __WCLONE : 0);
+ if (pid == -1 && errno == ECHILD)
+ /* OK, the proccess has disappeared. We'll catch the actual
+ exit event in lin_lwp_wait. */
+ return 0;
+
+ gdb_assert (pid == GET_LWP (lp->pid));
+
+ if (WIFEXITED (status) || WIFSIGNALED (status))
+ {
+ gdb_assert (num_lwps > 1);
+ gdb_assert (! is_cloned (lp->pid));
+
+ gdb_assert (in_thread_list (lp->pid));
+ if (lp->pid != inferior_pid)
+ delete_thread (lp->pid);
+ printf_unfiltered ("[%s exited]\n",
+ target_pid_to_str (lp->pid));
+
+ delete_lwp (lp->pid);
+ return 0;
+ }
+
+ gdb_assert (WIFSTOPPED (status));
+ lp->stopped = 1;
+
+ if (WSTOPSIG (status) != SIGSTOP)
+ {
+ if (WSTOPSIG (status) == SIGTRAP
+ && breakpoint_inserted_here_p (read_pc_pid (pid)
+ - DECR_PC_AFTER_BREAK))
+ {
+ /* If a LWP other than the LWP that we're reporting an
+ event for has hit a GDB breakpoint (as opposed to
+ some random trap signal), then just arrange for it to
+ hit it again later. We don't keep the SIGTRAP status
+ and don't forward the SIGTRAP signal to the LWP. We
+ will handle the current event, eventually we will
+ resume all LWPs, and this one will get its breakpoint
+ trap again.
+
+ If we do not do this, then we run the risk that the
+ user will delete or disable the breakpoint, but the
+ thread will have already tripped on it. */
+#if DEBUG
+ printf ("Tripped breakpoint at %lx in LWP %d"
+ " while waiting for SIGSTOP.\n",
+ (long) read_pc_pid (lp->pid), pid);
+#endif
+ /* Set the PC to before the trap. */
+ if (DECR_PC_AFTER_BREAK)
+ write_pc_pid (read_pc_pid (pid) - DECR_PC_AFTER_BREAK, pid);
+ }
+ else
+ {
+#if DEBUG
+ printf ("Received %s in LWP %d while waiting for SIGSTOP.\n",
+ strsignal (WSTOPSIG (status)), pid);
+#endif
+ /* The thread was stopped with a signal other than
+ SIGSTOP, and didn't accidentiliy trip a breakpoint.
+ Record the wait status. */
+ lp->status = status;
+ }
+ }
+ else
+ {
+ /* We caught the SIGSTOP that we intended to catch, so
+ there's no SIGSTOP pending. */
+ lp->signalled = 0;
+ }
+ }
+
+ return 0;
+}
+
+/* Return non-zero if LP has a wait status pending. */
+
+static int
+status_callback (struct lwp_info *lp, void *data)
+{
+ return (lp->status != 0);
+}
+
+/* Return non-zero if LP isn't stopped. */
+
+static int
+running_callback (struct lwp_info *lp, void *data)
+{
+ return (lp->stopped == 0);
+}
+
+static int
+lin_lwp_wait (int pid, struct target_waitstatus *ourstatus)
+{
+ struct lwp_info *lp = NULL;
+ int options = 0;
+ int status = 0;
+
+ retry:
+
+ /* First check if there is a LWP with a wait status pending. */
+ if (pid == -1)
+ {
+ /* Any LWP will do. */
+ lp = iterate_over_lwps (status_callback, NULL);
+ if (lp)
+ {
+#if DEBUG
+ printf ("Using pending wait status for LWP %d.\n",
+ GET_LWP (lp->pid));
+#endif
+ status = lp->status;
+ lp->status = 0;
+ }
+
+ /* But if we don't fine one, we'll have to wait, and check both
+ cloned and uncloned processes. We start with the cloned
+ processes. */
+ options = __WCLONE | WNOHANG;
+ }
+ else if (is_lwp (pid))
+ {
+#if DEBUG
+ printf ("Waiting for specific LWP %d.\n", GET_LWP (pid));
+#endif
+ /* We have a specific LWP to check. */
+ lp = find_lwp_pid (GET_LWP (pid));
+ gdb_assert (lp);
+ status = lp->status;
+ lp->status = 0;
+#if DEBUG
+ if (status)
+ printf ("Using pending wait status for LWP %d.\n",
+ GET_LWP (lp->pid));
+#endif
+
+ /* If we have to wait, take into account whether PID is a cloned
+ process or not. And we have to convert it to something that
+ the layer beneath us can understand. */
+ options = is_cloned (lp->pid) ? __WCLONE : 0;
+ pid = GET_LWP (pid);
+ }
+
+ if (status && lp->signalled)
+ {
+ /* A pending SIGSTOP may interfere with the normal stream of
+ events. In a typical case where interference is a problem,
+ we have a SIGSTOP signal pending for LWP A while
+ single-stepping it, encounter an event in LWP B, and take the
+ pending SIGSTOP while trying to stop LWP A. After processing
+ the event in LWP B, LWP A is continued, and we'll never see
+ the SIGTRAP associated with the last time we were
+ single-stepping LWP A. */
+
+ /* Resume the thread. It should halt immediately returning the
+ pending SIGSTOP. */
+ child_resume (GET_LWP (lp->pid), lp->step, TARGET_SIGNAL_0);
+ lp->stopped = 0;
+
+ /* This should catch the pending SIGSTOP. */
+ stop_wait_callback (lp, NULL);
+ }
+
+ set_sigint_trap (); /* Causes SIGINT to be passed on to the
+ attached process. */
+ set_sigio_trap ();
+
+ while (status == 0)
+ {
+ pid_t lwpid;
+
+ lwpid = waitpid (pid, &status, options);
+ if (lwpid > 0)
+ {
+ gdb_assert (pid == -1 || lwpid == pid);
+
+ lp = find_lwp_pid (lwpid);
+ if (! lp)
+ {
+ lp = add_lwp (BUILD_LWP (lwpid, inferior_pid));
+ if (threaded)
+ {
+ gdb_assert (WIFSTOPPED (status) && WSTOPSIG (status) == SIGSTOP);
+ lp->signalled = 1;
+
+ if (! in_thread_list (inferior_pid))
+ {
+ inferior_pid = BUILD_LWP (inferior_pid, inferior_pid);
+ add_thread (inferior_pid);
+ }
+
+ add_thread (lp->pid);
+ printf_unfiltered ("[New %s]\n",
+ target_pid_to_str (lp->pid));
+ }
+ }
+
+ /* Make sure we don't report a TARGET_WAITKIND_EXITED or
+ TARGET_WAITKIND_SIGNALLED event if there are still LWP's
+ left in the process. */
+ if ((WIFEXITED (status) || WIFSIGNALED (status)) && num_lwps > 1)
+ {
+ if (in_thread_list (lp->pid))
+ {
+ /* Core GDB cannot deal with us deeting the current
+ thread. */
+ if (lp->pid != inferior_pid)
+ delete_thread (lp->pid);
+ printf_unfiltered ("[%s exited]\n",
+ target_pid_to_str (lp->pid));
+ }
+#if DEBUG
+ printf ("%s exited.\n", target_pid_to_str (lp->pid));
+#endif
+ delete_lwp (lp->pid);
+
+ /* Make sure there is at least one thread running. */
+ gdb_assert (iterate_over_lwps (running_callback, NULL));
+
+ /* Discard the event. */
+ status = 0;
+ continue;
+ }
+
+ /* Make sure we don't report a SIGSTOP that we sent
+ ourselves in an attempt to stop an LWP. */
+ if (lp->signalled && WIFSTOPPED (status)
+ && WSTOPSIG (status) == SIGSTOP)
+ {
+#if DEBUG
+ printf ("Delayed SIGSTOP caught for %s.\n",
+ target_pid_to_str (lp->pid));
+#endif
+ /* This is a delayed SIGSTOP. */
+ lp->signalled = 0;
+
+ child_resume (GET_LWP (lp->pid), lp->step, TARGET_SIGNAL_0);
+ lp->stopped = 0;
+
+ /* Discard the event. */
+ status = 0;
+ continue;
+ }
+
+ break;
+ }
+
+ if (pid == -1)
+ {
+ /* Alternate between checking cloned and uncloned processes. */
+ options ^= __WCLONE;
+
+ /* And suspend every time we have checked both. */
+ if (options & __WCLONE)
+ sigsuspend (&suspend_mask);
+ }
+
+ /* We shouldn't end up here unless we want to try again. */
+ gdb_assert (status == 0);
+ }
+
+ clear_sigio_trap ();
+ clear_sigint_trap ();
+
+ gdb_assert (lp);
+
+ /* Don't report signals that GDB isn't interested in, such as
+ signals that are neither printed nor stopped upon. Stopping all
+ threads can be a bit time-consuming so if we want decent
+ performance with heavily multi-threaded programs, especially when
+ they're using a high frequency timer, we'd better avoid it if we
+ can. */
+
+ if (WIFSTOPPED (status))
+ {
+ int signo = target_signal_from_host (WSTOPSIG (status));
+
+ if (signal_stop_state (signo) == 0
+ && signal_print_state (signo) == 0
+ && signal_pass_state (signo) == 1)
+ {
+ child_resume (GET_LWP (lp->pid), lp->step, signo);
+ lp->stopped = 0;
+ status = 0;
+ goto retry;
+ }
+ }
+
+ /* This LWP is stopped now. */
+ lp->stopped = 1;
+
+ /* Now stop all other LWP's ... */
+ iterate_over_lwps (stop_callback, NULL);
+
+ /* ... and wait until all of them have reported back that they're no
+ longer running. */
+ iterate_over_lwps (stop_wait_callback, NULL);
+
+ /* If we're not running in "threaded" mode, we'll report the bare
+ process id. */
+
+ if (WIFSTOPPED (status) && WSTOPSIG (status) == SIGTRAP)
+ trap_pid = (threaded ? lp->pid : GET_LWP (lp->pid));
+ else
+ trap_pid = 0;
+
+ store_waitstatus (ourstatus, status);
+ return (threaded ? lp->pid : GET_LWP (lp->pid));
+}
+
+static int
+kill_callback (struct lwp_info *lp, void *data)
+{
+ ptrace (PTRACE_KILL, GET_LWP (lp->pid), 0, 0);
+ return 0;
+}
+
+static int
+kill_wait_callback (struct lwp_info *lp, void *data)
+{
+ pid_t pid;
+
+ /* We must make sure that there are no pending events (delayed
+ SIGSTOPs, pending SIGTRAPs, etc.) to make sure the current
+ program doesn't interfere with any following debugging session. */
+
+ /* For cloned processes we must check both with __WCLONE and
+ without, since the exit status of a cloned process isn't reported
+ with __WCLONE. */
+ if (is_cloned (lp->pid))
+ {
+ do
+ {
+ pid = waitpid (GET_LWP (lp->pid), NULL, __WCLONE);
+ }
+ while (pid == GET_LWP (lp->pid));
+
+ gdb_assert (pid == -1 && errno == ECHILD);
+ }
+
+ do
+ {
+ pid = waitpid (GET_LWP (lp->pid), NULL, 0);
+ }
+ while (pid == GET_LWP (lp->pid));
+
+ gdb_assert (pid == -1 && errno == ECHILD);
+ return 0;
+}
+
+static void
+lin_lwp_kill (void)
+{
+ /* Kill all LWP's ... */
+ iterate_over_lwps (kill_callback, NULL);
+
+ /* ... and wait until we've flushed all events. */
+ iterate_over_lwps (kill_wait_callback, NULL);
+
+ target_mourn_inferior ();
+}
+
+static void
+lin_lwp_create_inferior (char *exec_file, char *allargs, char **env)
+{
+ struct target_ops *target_beneath;
+
+ init_lwp_list ();
+
+#if 0
+ target_beneath = find_target_beneath (&lin_lwp_ops);
+#else
+ target_beneath = &child_ops;
+#endif
+ target_beneath->to_create_inferior (exec_file, allargs, env);
+}
+
+static void
+lin_lwp_mourn_inferior (void)
+{
+ struct target_ops *target_beneath;
+
+ init_lwp_list ();
+
+ trap_pid = 0;
+
+#if 0
+ target_beneath = find_target_beneath (&lin_lwp_ops);
+#else
+ target_beneath = &child_ops;
+#endif
+ target_beneath->to_mourn_inferior ();
+}
+
+static void
+lin_lwp_fetch_registers (int regno)
+{
+ struct cleanup *old_chain = save_inferior_pid ();
+
+ if (is_lwp (inferior_pid))
+ inferior_pid = GET_LWP (inferior_pid);
+
+ fetch_inferior_registers (regno);
+
+ do_cleanups (old_chain);
+}
+
+static void
+lin_lwp_store_registers (int regno)
+{
+ struct cleanup *old_chain = save_inferior_pid ();
+
+ if (is_lwp (inferior_pid))
+ inferior_pid = GET_LWP (inferior_pid);
+
+ store_inferior_registers (regno);
+
+ do_cleanups (old_chain);
+}
+
+static int
+lin_lwp_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
+ struct target_ops *target)
+{
+ struct cleanup *old_chain = save_inferior_pid ();
+ int xfer;
+
+ if (is_lwp (inferior_pid))
+ inferior_pid = GET_LWP (inferior_pid);
+
+ xfer = child_xfer_memory (memaddr, myaddr, len, write, target);
+
+ do_cleanups (old_chain);
+ return xfer;
+}
+
+static int
+lin_lwp_thread_alive (int pid)
+{
+ gdb_assert (is_lwp (pid));
+
+ errno = 0;
+ ptrace (PTRACE_PEEKUSER, GET_LWP (pid), 0, 0);
+ if (errno)
+ return 0;
+
+ return 1;
+}
+
+static char *
+lin_lwp_pid_to_str (int pid)
+{
+ static char buf[64];
+
+ if (is_lwp (pid))
+ {
+ snprintf (buf, sizeof (buf), "LWP %d", GET_LWP (pid));
+ return buf;
+ }
+
+ return normal_pid_to_str (pid);
+}
+
+static void
+init_lin_lwp_ops (void)
+{
+#if 0
+ lin_lwp_ops.to_open = lin_lwp_open;
+#endif
+ lin_lwp_ops.to_shortname = "lwp-layer";
+ lin_lwp_ops.to_longname = "lwp-layer";
+ lin_lwp_ops.to_doc = "Low level threads support (LWP layer)";
+ lin_lwp_ops.to_attach = lin_lwp_attach;
+ lin_lwp_ops.to_detach = lin_lwp_detach;
+ lin_lwp_ops.to_resume = lin_lwp_resume;
+ lin_lwp_ops.to_wait = lin_lwp_wait;
+ lin_lwp_ops.to_fetch_registers = lin_lwp_fetch_registers;
+ lin_lwp_ops.to_store_registers = lin_lwp_store_registers;
+ lin_lwp_ops.to_xfer_memory = lin_lwp_xfer_memory;
+ lin_lwp_ops.to_kill = lin_lwp_kill;
+ lin_lwp_ops.to_create_inferior = lin_lwp_create_inferior;
+ lin_lwp_ops.to_mourn_inferior = lin_lwp_mourn_inferior;
+ lin_lwp_ops.to_thread_alive = lin_lwp_thread_alive;
+ lin_lwp_ops.to_pid_to_str = lin_lwp_pid_to_str;
+ lin_lwp_ops.to_stratum = thread_stratum;
+ lin_lwp_ops.to_has_thread_control = tc_schedlock;
+ lin_lwp_ops.to_magic = OPS_MAGIC;
+}
+
+static void
+sigchld_handler (int signo)
+{
+ /* Do nothing. The only reason for this handler is that it allows
+ us to use sigsuspend in lin_lwp_wait above to wait for the
+ arrival of a SIGCHLD. */
+}
+
+void
+_initialize_lin_lwp (void)
+{
+ struct sigaction action;
+ sigset_t mask;
+
+ extern void thread_db_init (struct target_ops *);
+
+ init_lin_lwp_ops ();
+ add_target (&lin_lwp_ops);
+ thread_db_init (&lin_lwp_ops);
+
+ action.sa_handler = sigchld_handler;
+ sigemptyset (&action.sa_mask);
+ action.sa_flags = 0;
+ sigaction (SIGCHLD, &action, NULL);
+
+ /* We block SIGCHLD throughout this code ... */
+ sigemptyset (&mask);
+ sigaddset (&mask, SIGCHLD);
+ sigprocmask (SIG_BLOCK, &mask, &suspend_mask);
+
+ /* ... except during a sigsuspend. */
+ sigdelset (&suspend_mask, SIGCHLD);
+}
+\f
+
+/* FIXME: kettenis/2000-08-26: The stuff on this page is specific to
+ the LinuxThreads library and therefore doesn't really belong here. */
+
+/* Read variable NAME in the target and return its value if found.
+ Otherwise return zero. It is assumed that the type of the variable
+ is `int'. */
+
+static int
+get_signo (const char *name)
+{
+ struct minimal_symbol *ms;
+ int signo;
+
+ ms = lookup_minimal_symbol (name, NULL, NULL);
+ if (ms == NULL)
+ return 0;
+
+ if (target_read_memory (SYMBOL_VALUE_ADDRESS (ms), (char *) &signo,
+ sizeof (signo)) != 0)
+ return 0;
+
+ return signo;
+}
+
+/* Return the set of signals used by the threads library in *SET. */
+
+void
+lin_thread_get_thread_signals (sigset_t *set)
+{
+ int restart;
+ int cancel;
+
+ sigemptyset (set);
+
+ restart = get_signo ("__pthread_sig_restart");
+ if (restart == 0)
+ return;
+
+ cancel = get_signo ("__pthread_sig_cancel");
+ if (cancel == 0)
+ return;
+
+ sigaddset (set, restart);
+ sigaddset (set, cancel);
+}
--- /dev/null
+/* <proc_service.h> implementation.
+ Copyright 1999, 2000 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+#include "defs.h"
+
+#include "gdb_proc_service.h"
+#include <sys/procfs.h>
+
+#include "inferior.h"
+#include "symtab.h"
+#include "target.h"
+
+/* Prototypes for supply_gregset etc. */
+#include "gregset.h"
+\f
+
+/* Fix-up some broken systems. */
+
+/* The prototypes in <proc_service.h> are slightly different on older
+ systems. Compensate for the discrepancies. */
+
+#ifdef PROC_SERVICE_IS_OLD
+typedef const struct ps_prochandle *gdb_ps_prochandle_t;
+typedef char *gdb_ps_read_buf_t;
+typedef char *gdb_ps_write_buf_t;
+typedef int gdb_ps_size_t;
+#else
+typedef struct ps_prochandle *gdb_ps_prochandle_t;
+typedef void *gdb_ps_read_buf_t;
+typedef const void *gdb_ps_write_buf_t;
+typedef size_t gdb_ps_size_t;
+#endif
+\f
+
+/* Building process ids. */
+
+#ifndef MERGEPID
+#define MERGEPID(PID, TID) (((PID) & 0xffff) | ((TID) << 16))
+#endif
+
+#define BUILD_LWP(tid, pid) MERGEPID (pid, tid)
+\f
+
+/* Helper functions. */
+
+static void
+restore_inferior_pid (void *arg)
+{
+ int *saved_pid_ptr = arg;
+ inferior_pid = *saved_pid_ptr;
+ free (arg);
+}
+
+static struct cleanup *
+save_inferior_pid (void)
+{
+ int *saved_pid_ptr;
+
+ saved_pid_ptr = xmalloc (sizeof (int));
+ *saved_pid_ptr = inferior_pid;
+ return make_cleanup (restore_inferior_pid, saved_pid_ptr);
+}
+
+/* Transfer LEN bytes of memory between BUF and address ADDR in the
+ process specified by PH. If WRITE, transfer them to the process,
+ else transfer them from the process. Returns PS_OK for success,
+ PS_ERR on failure.
+
+ This is a helper function for ps_pdread, ps_pdwrite, ps_ptread and
+ ps_ptwrite. */
+
+static ps_err_e
+ps_xfer_memory (const struct ps_prochandle *ph, paddr_t addr,
+ char *buf, size_t len, int write)
+{
+ struct cleanup *old_chain = save_inferior_pid ();
+ int ret;
+
+ inferior_pid = ph->pid;
+
+ if (write)
+ ret = target_write_memory (addr, buf, len);
+ else
+ ret = target_read_memory (addr, buf, len);
+
+ do_cleanups (old_chain);
+
+ return (ret == 0 ? PS_OK : PS_ERR);
+}
+\f
+
+/* Stop the target process PH. */
+
+ps_err_e
+ps_pstop (gdb_ps_prochandle_t ph)
+{
+ /* The process is always stopped when under control of GDB. */
+ return PS_OK;
+}
+
+/* Resume the target process PH. */
+
+ps_err_e
+ps_pcontinue (gdb_ps_prochandle_t ph)
+{
+ /* Pretend we did successfully continue the process. GDB will take
+ care of it later on. */
+ return PS_OK;
+}
+
+/* Stop the lightweight process LWPID within the target process PH. */
+
+ps_err_e
+ps_lstop (gdb_ps_prochandle_t ph, lwpid_t lwpid)
+{
+ /* All lightweight processes are stopped when under control of GDB. */
+ return PS_OK;
+}
+
+/* Resume the lightweight process (LWP) LWPID within the target
+ process PH. */
+
+ps_err_e
+ps_lcontinue (gdb_ps_prochandle_t ph, lwpid_t lwpid)
+{
+ /* Pretend we did successfully continue LWPID. GDB will take care
+ of it later on. */
+ return PS_OK;
+}
+
+/* Get the size of the architecture-dependent extra state registers
+ for LWP LWPID within the target process PH and return it in
+ *XREGSIZE. */
+
+ps_err_e
+ps_lgetxregsize (gdb_ps_prochandle_t ph, lwpid_t lwpid, int *xregsize)
+{
+ /* FIXME: Not supported yet. */
+ return PS_OK;
+}
+
+/* Get the extra state registers of LWP LWPID within the target
+ process PH and store them in XREGSET. */
+
+ps_err_e
+ps_lgetxregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, caddr_t xregset)
+{
+ /* FIXME: Not supported yet. */
+ return PS_OK;
+}
+
+/* Set the extra state registers of LWP LWPID within the target
+ process PH from XREGSET. */
+
+ps_err_e
+ps_lsetxregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, caddr_t xregset)
+{
+ /* FIXME: Not supported yet. */
+ return PS_OK;
+}
+
+/* Log (additional) diognostic information. */
+
+void
+ps_plog (const char *fmt, ...)
+{
+ va_list args;
+
+ va_start (args, fmt);
+ vfprintf_filtered (gdb_stderr, fmt, args);
+}
+
+/* Search for the symbol named NAME within the object named OBJ within
+ the target process PH. If the symbol is found the address of the
+ symbol is stored in SYM_ADDR. */
+
+ps_err_e
+ps_pglobal_lookup (gdb_ps_prochandle_t ph, const char *obj,
+ const char *name, paddr_t *sym_addr)
+{
+ struct minimal_symbol *ms;
+
+ /* FIXME: kettenis/2000-09-03: What should we do with OBJ? */
+ ms = lookup_minimal_symbol (name, NULL, NULL);
+ if (ms == NULL)
+ return PS_NOSYM;
+
+ *sym_addr = SYMBOL_VALUE_ADDRESS (ms);
+ return PS_OK;
+}
+
+/* Read SIZE bytes from the target process PH at address ADDR and copy
+ them into BUF. */
+
+ps_err_e
+ps_pdread (gdb_ps_prochandle_t ph, paddr_t addr,
+ gdb_ps_read_buf_t buf, gdb_ps_size_t size)
+{
+ return ps_xfer_memory (ph, addr, buf, size, 0);
+}
+
+/* Write SIZE bytes from BUF into the target process PH at address ADDR. */
+
+ps_err_e
+ps_pdwrite (gdb_ps_prochandle_t ph, paddr_t addr,
+ gdb_ps_write_buf_t buf, gdb_ps_size_t size)
+{
+ return ps_xfer_memory (ph, addr, (char *) buf, size, 1);
+}
+
+/* Read SIZE bytes from the target process PH at address ADDR and copy
+ them into BUF. */
+
+ps_err_e
+ps_ptread (gdb_ps_prochandle_t ph, paddr_t addr,
+ gdb_ps_read_buf_t buf, gdb_ps_size_t size)
+{
+ return ps_xfer_memory (ph, addr, buf, size, 0);
+}
+
+/* Write SIZE bytes from BUF into the target process PH at address ADDR. */
+
+ps_err_e
+ps_ptwrite (gdb_ps_prochandle_t ph, paddr_t addr,
+ gdb_ps_write_buf_t buf, gdb_ps_size_t size)
+{
+ return ps_xfer_memory (ph, addr, (char *) buf, size, 1);
+}
+
+/* Get the general registers of LWP LWPID within the target process PH
+ and store them in GREGSET. */
+
+ps_err_e
+ps_lgetregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, prgregset_t gregset)
+{
+ struct cleanup *old_chain = save_inferior_pid ();
+
+ inferior_pid = BUILD_LWP (lwpid, ph->pid);
+
+ target_fetch_registers (-1);
+ fill_gregset ((gdb_gregset_t *) gregset, -1);
+
+ do_cleanups (old_chain);
+ return PS_OK;
+}
+
+/* Set the general registers of LWP LWPID within the target process PH
+ from GREGSET. */
+
+ps_err_e
+ps_lsetregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, const prgregset_t gregset)
+{
+ struct cleanup *old_chain = save_inferior_pid ();
+
+ inferior_pid = BUILD_LWP (lwpid, ph->pid);
+
+ /* FIXME: We should really make supply_gregset const-correct. */
+ supply_gregset ((gdb_gregset_t *) gregset);
+ target_store_registers (-1);
+
+ do_cleanups (old_chain);
+ return PS_OK;
+}
+
+/* Get the floating-point registers of LWP LWPID within the target
+ process PH and store them in FPREGSET. */
+
+ps_err_e
+ps_lgetfpregs (gdb_ps_prochandle_t ph, lwpid_t lwpid,
+ gdb_prfpregset_t *fpregset)
+{
+ struct cleanup *old_chain = save_inferior_pid ();
+
+ inferior_pid = BUILD_LWP (lwpid, ph->pid);
+
+ target_fetch_registers (-1);
+ fill_fpregset ((gdb_fpregset_t *) fpregset, -1);
+
+ do_cleanups (old_chain);
+ return PS_OK;
+}
+
+/* Set the floating-point registers of LWP LWPID within the target
+ process PH from FPREGSET. */
+
+ps_err_e
+ps_lsetfpregs (gdb_ps_prochandle_t ph, lwpid_t lwpid,
+ const gdb_prfpregset_t *fpregset)
+{
+ struct cleanup *old_chain = save_inferior_pid ();
+
+ inferior_pid = BUILD_LWP (lwpid, ph->pid);
+
+ /* FIXME: We should really make supply_fpregset const-correct. */
+ supply_fpregset ((gdb_fpregset_t *) fpregset);
+ target_store_registers (-1);
+
+ do_cleanups (old_chain);
+ return PS_OK;
+}
+
+/* Return overall process id of the target PH.
+ Special for Linux -- not used on Solaris. */
+
+pid_t
+ps_getpid (gdb_ps_prochandle_t ph)
+{
+ return ph->pid;
+}
+
+void
+_initialize_proc_service (void)
+{
+ /* This function solely exists to make sure this module is linked
+ into the final binary. */
+}
--- /dev/null
+/* libthread_db assisted debugging support, generic parts.
+ Copyright 1999, 2000 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+#include "defs.h"
+
+#include "gdb_assert.h"
+#include <dlfcn.h>
+#include "gdb_proc_service.h"
+#include "gdb_thread_db.h"
+
+#include "gdbthread.h"
+#include "inferior.h"
+#include "target.h"
+
+#ifndef LIBTHREAD_DB_SO
+#define LIBTHREAD_DB_SO "libthread_db.so.1"
+#endif
+
+/* If we're running on Linux, we must explicitly attach to any new threads. */
+
+/* FIXME: There is certainly some room for improvements:
+ - Cache LWP ids.
+ - Bypass libthread_db when fetching or storing registers for
+ threads bound to a LWP. */
+
+/* This module's target vector. */
+static struct target_ops thread_db_ops;
+
+/* The target vector that we call for things this module can't handle. */
+static struct target_ops *target_beneath;
+
+/* Pointer to the next function on the objfile event chain. */
+static void (*target_new_objfile_chain) (struct objfile *objfile);
+
+/* Non-zero if we're using this module's target vector. */
+static int using_thread_db;
+
+/* Non-zero if we have determined the signals used by the threads
+ library. */
+static int thread_signals;
+static sigset_t thread_stop_set;
+static sigset_t thread_print_set;
+
+/* Structure that identifies the child process for the
+ <proc_service.h> interface. */
+static struct ps_prochandle proc_handle;
+
+/* Connection to the libthread_db library. */
+static td_thragent_t *thread_agent;
+
+/* Pointers to the libthread_db functions. */
+
+static td_err_e (*td_init_p) (void);
+
+static td_err_e (*td_ta_new_p) (struct ps_prochandle *ps, td_thragent_t **ta);
+static td_err_e (*td_ta_map_id2thr_p) (const td_thragent_t *ta, thread_t pt,
+ td_thrhandle_t *__th);
+static td_err_e (*td_ta_map_lwp2thr_p) (const td_thragent_t *ta, lwpid_t lwpid,
+ td_thrhandle_t *th);
+static td_err_e (*td_ta_thr_iter_p) (const td_thragent_t *ta,
+ td_thr_iter_f *callback,
+ void *cbdata_p, td_thr_state_e state,
+ int ti_pri, sigset_t *ti_sigmask_p,
+ unsigned int ti_user_flags);
+static td_err_e (*td_ta_event_addr_p) (const td_thragent_t *ta,
+ td_event_e event, td_notify_t *ptr);
+static td_err_e (*td_ta_set_event_p) (const td_thragent_t *ta,
+ td_thr_events_t *event);
+static td_err_e (*td_ta_event_getmsg_p) (const td_thragent_t *ta,
+ td_event_msg_t *msg);
+
+static td_err_e (*td_thr_validate_p) (const td_thrhandle_t *th);
+static td_err_e (*td_thr_get_info_p) (const td_thrhandle_t *th,
+ td_thrinfo_t *infop);
+static td_err_e (*td_thr_getfpregs_p) (const td_thrhandle_t *th,
+ gdb_prfpregset_t *regset);
+static td_err_e (*td_thr_getgregs_p) (const td_thrhandle_t *th,
+ prgregset_t gregs);
+static td_err_e (*td_thr_setfpregs_p) (const td_thrhandle_t *th,
+ const gdb_prfpregset_t *fpregs);
+static td_err_e (*td_thr_setgregs_p) (const td_thrhandle_t *th,
+ prgregset_t gregs);
+static td_err_e (*td_thr_event_enable_p) (const td_thrhandle_t *th, int event);
+
+/* Location of the thread creation event breakpoint. The code at this
+ location in the child process will be called by the pthread library
+ whenever a new thread is created. By setting a special breakpoint
+ at this location, GDB can detect when a new thread is created. We
+ obtain this location via the td_ta_event_addr call. */
+static CORE_ADDR td_create_bp_addr;
+
+/* Location of the thread death event breakpoint. */
+static CORE_ADDR td_death_bp_addr;
+
+/* Prototypes for local functions. */
+static int find_new_threads_callback (const td_thrhandle_t *th_p, void *data);
+\f
+
+/* Building process ids. */
+
+#ifndef TIDGET
+#define TIDGET(PID) (((PID) & 0x7fffffff) >> 16)
+#define PIDGET(PID) (((PID) & 0xffff))
+#define MERGEPID(PID, TID) (((PID) & 0xffff) | ((TID) << 16))
+#endif
+
+#define THREAD_FLAG 0x80000000
+
+#define is_lwp(pid) (((pid) & THREAD_FLAG) == 0 && TIDGET (pid))
+#define is_thread(pid) ((pid) & THREAD_FLAG)
+
+#define GET_PID(pid) PIDGET (pid)
+#define GET_LWP(pid) TIDGET (pid)
+#define GET_THREAD(pid) TIDGET (pid)
+
+#define BUILD_LWP(tid, pid) MERGEPID (pid, tid)
+#define BUILD_THREAD(tid, pid) (MERGEPID (pid, tid) | THREAD_FLAG)
+\f
+
+struct private_thread_info
+{
+ /* Cached LWP id. Must come first, see lin-lwp.c. */
+ lwpid_t lwpid;
+};
+
+\f
+/* Helper functions. */
+
+static void
+restore_inferior_pid (void *arg)
+{
+ int *saved_pid_ptr = arg;
+ inferior_pid = *saved_pid_ptr;
+ free (arg);
+}
+
+static struct cleanup *
+save_inferior_pid (void)
+{
+ int *saved_pid_ptr;
+
+ saved_pid_ptr = xmalloc (sizeof (int));
+ *saved_pid_ptr = inferior_pid;
+ return make_cleanup (restore_inferior_pid, saved_pid_ptr);
+}
+\f
+
+static char *
+thread_db_err_str (td_err_e err)
+{
+ static char buf[64];
+
+ switch (err)
+ {
+ case TD_OK:
+ return "generic 'call succeeded'";
+ case TD_ERR:
+ return "generic error";
+ case TD_NOTHR:
+ return "no thread to satisfy query";
+ case TD_NOSV:
+ return "no sync handle to satisfy query";
+ case TD_NOLWP:
+ return "no LWP to satisfy query";
+ case TD_BADPH:
+ return "invalid process handle";
+ case TD_BADTH:
+ return "invalid thread handle";
+ case TD_BADSH:
+ return "invalid synchronization handle";
+ case TD_BADTA:
+ return "invalid thread agent";
+ case TD_BADKEY:
+ return "invalid key";
+ case TD_NOMSG:
+ return "no event message for getmsg";
+ case TD_NOFPREGS:
+ return "FPU register set not available";
+ case TD_NOLIBTHREAD:
+ return "application not linked with libthread";
+ case TD_NOEVENT:
+ return "requested event is not supported";
+ case TD_NOCAPAB:
+ return "capability not available";
+ case TD_DBERR:
+ return "debugger service failed";
+ case TD_NOAPLIC:
+ return "operation not applicable to";
+ case TD_NOTSD:
+ return "no thread-specific data for this thread";
+ case TD_MALLOC:
+ return "malloc failed";
+ case TD_PARTIALREG:
+ return "only part of register set was written/read";
+ case TD_NOXREGS:
+ return "X register set not available for this thread";
+ default:
+ snprintf (buf, sizeof (buf), "unknown thread_db error '%d'", err);
+ return buf;
+ }
+}
+
+static char *
+thread_db_state_str (td_thr_state_e state)
+{
+ static char buf[64];
+
+ switch (state)
+ {
+ case TD_THR_STOPPED:
+ return "stopped by debugger";
+ case TD_THR_RUN:
+ return "runnable";
+ case TD_THR_ACTIVE:
+ return "active";
+ case TD_THR_ZOMBIE:
+ return "zombie";
+ case TD_THR_SLEEP:
+ return "sleeping";
+ case TD_THR_STOPPED_ASLEEP:
+ return "stopped by debugger AND blocked";
+ default:
+ snprintf (buf, sizeof (buf), "unknown thread_db state %d", state);
+ return buf;
+ }
+}
+\f
+
+/* Convert between user-level thread ids and LWP ids. */
+
+static int
+thread_from_lwp (int pid)
+{
+ td_thrinfo_t ti;
+ td_thrhandle_t th;
+ td_err_e err;
+
+ if (GET_LWP (pid) == 0)
+ pid = BUILD_LWP (pid, pid);
+
+ gdb_assert (is_lwp (pid));
+
+ err = td_ta_map_lwp2thr_p (thread_agent, GET_LWP (pid), &th);
+ if (err != TD_OK)
+ error ("Cannot find user-level thread for LWP %d: %s",
+ GET_LWP (pid), thread_db_err_str (err));
+
+ err = td_thr_get_info_p (&th, &ti);
+ if (err != TD_OK)
+ error ("Cannot get thread info: %s", thread_db_err_str (err));
+
+ return BUILD_THREAD (ti.ti_tid, GET_PID (pid));
+}
+
+static int
+lwp_from_thread (int pid)
+{
+ td_thrinfo_t ti;
+ td_thrhandle_t th;
+ td_err_e err;
+
+ if (! is_thread (pid))
+ return pid;
+
+ err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (pid), &th);
+ if (err != TD_OK)
+ error ("Cannot find thread %ld: %s",
+ (long) GET_THREAD (pid), thread_db_err_str (err));
+
+ err = td_thr_get_info_p (&th, &ti);
+ if (err != TD_OK)
+ error ("Cannot get thread info: %s", thread_db_err_str (err));
+
+ return BUILD_LWP (ti.ti_lid, GET_PID (pid));
+}
+\f
+
+void
+thread_db_init (struct target_ops *target)
+{
+ target_beneath = target;
+}
+
+static int
+thread_db_load (void)
+{
+ void *handle;
+ td_err_e err;
+
+ handle = dlopen (LIBTHREAD_DB_SO, RTLD_NOW);
+ if (handle == NULL)
+ return 0;
+
+ /* Initialize pointers to the dynamic library functions we will use.
+ Essential functions first. */
+
+ td_init_p = dlsym (handle, "td_init");
+ if (td_init_p == NULL)
+ return 0;
+
+ td_ta_new_p = dlsym (handle, "td_ta_new");
+ if (td_ta_new_p == NULL)
+ return 0;
+
+ td_ta_map_id2thr_p = dlsym (handle, "td_ta_map_id2thr");
+ if (td_ta_map_id2thr_p == NULL)
+ return 0;
+
+ td_ta_map_lwp2thr_p = dlsym (handle, "td_ta_map_lwp2thr");
+ if (td_ta_map_lwp2thr_p == NULL)
+ return 0;
+
+ td_ta_thr_iter_p = dlsym (handle, "td_ta_thr_iter");
+ if (td_ta_thr_iter_p == NULL)
+ return 0;
+
+ td_thr_validate_p = dlsym (handle, "td_thr_validate");
+ if (td_thr_validate_p == NULL)
+ return 0;
+
+ td_thr_get_info_p = dlsym (handle, "td_thr_get_info");
+ if (td_thr_get_info_p == NULL)
+ return 0;
+
+ td_thr_getfpregs_p = dlsym (handle, "td_thr_getfpregs");
+ if (td_thr_getfpregs_p == NULL)
+ return 0;
+
+ td_thr_getgregs_p = dlsym (handle, "td_thr_getgregs");
+ if (td_thr_getgregs_p == NULL)
+ return 0;
+
+ td_thr_setfpregs_p = dlsym (handle, "td_thr_setfpregs");
+ if (td_thr_setfpregs_p == NULL)
+ return 0;
+
+ td_thr_setgregs_p = dlsym (handle, "td_thr_setgregs");
+ if (td_thr_setgregs_p == NULL)
+ return 0;
+
+ /* Initialize the library. */
+ err = td_init_p ();
+ if (err != TD_OK)
+ {
+ warning ("Cannot initialize libthread_db: %s", thread_db_err_str (err));
+ return 0;
+ }
+
+ /* These are not essential. */
+ td_ta_event_addr_p = dlsym (handle, "td_ta_event_addr");
+ td_ta_set_event_p = dlsym (handle, "td_ta_set_event");
+ td_ta_event_getmsg_p = dlsym (handle, "td_ta_event_getmsg");
+ td_thr_event_enable_p = dlsym (handle, "td_thr_event_enable");
+
+ return 1;
+}
+
+static void
+enable_thread_event_reporting (void)
+{
+ td_thr_events_t events;
+ td_notify_t notify;
+ td_err_e err;
+
+ /* We cannot use the thread event reporting facility if these
+ functions aren't available. */
+ if (td_ta_event_addr_p == NULL || td_ta_set_event_p == NULL
+ || td_ta_event_getmsg_p == NULL || td_thr_event_enable_p == NULL)
+ return;
+
+ /* Set the process wide mask saying which events we're interested in. */
+ td_event_emptyset (&events);
+ td_event_addset (&events, TD_CREATE);
+#if 0
+ /* FIXME: kettenis/2000-04-23: The event reporting facility is
+ broken for TD_DEATH events in glibc 2.1.3, so don't enable it for
+ now. */
+ td_event_addset (&events, TD_DEATH);
+#endif
+
+ err = td_ta_set_event_p (thread_agent, &events);
+ if (err != TD_OK)
+ {
+ warning ("Unable to set global thread event mask: %s",
+ thread_db_err_str (err));
+ return;
+ }
+
+ /* Delete previous thread event breakpoints, if any. */
+ remove_thread_event_breakpoints ();
+
+ /* Get address for thread creation breakpoint. */
+ err = td_ta_event_addr_p (thread_agent, TD_CREATE, ¬ify);
+ if (err != TD_OK)
+ {
+ warning ("Unable to get location for thread creation breakpoint: %s",
+ thread_db_err_str (err));
+ return;
+ }
+
+ /* Set up the breakpoint. */
+ td_create_bp_addr = (CORE_ADDR) notify.u.bptaddr;
+ create_thread_event_breakpoint (td_create_bp_addr);
+
+ /* Get address for thread death breakpoint. */
+ err = td_ta_event_addr_p (thread_agent, TD_DEATH, ¬ify);
+ if (err != TD_OK)
+ {
+ warning ("Unable to get location for thread creation breakpoint: %s",
+ thread_db_err_str (err));
+ return;
+ }
+
+ /* Set up the breakpoint. */
+ td_death_bp_addr = (CORE_ADDR) notify.u.bptaddr;
+ create_thread_event_breakpoint (td_death_bp_addr);
+}
+
+static void
+disable_thread_event_reporting (void)
+{
+ td_thr_events_t events;
+
+ /* Set the process wide mask saying we aren't interested in any
+ events anymore. */
+ td_event_emptyset (&events);
+ td_ta_set_event_p (thread_agent, &events);
+
+ /* Delete thread event breakpoints, if any. */
+ remove_thread_event_breakpoints ();
+ td_create_bp_addr = 0;
+ td_death_bp_addr = 0;
+}
+
+static void
+check_thread_signals (void)
+{
+#ifdef GET_THREAD_SIGNALS
+ if (! thread_signals)
+ {
+ sigset_t mask;
+ int i;
+
+ GET_THREAD_SIGNALS (&mask);
+ sigemptyset (&thread_stop_set);
+ sigemptyset (&thread_print_set);
+
+ for (i = 0; i < NSIG; i++)
+ {
+ if (sigismember (&mask, i))
+ {
+ if (signal_stop_update (target_signal_from_host (i), 0))
+ sigaddset (&thread_stop_set, i);
+ if (signal_print_update (target_signal_from_host (i), 0))
+ sigaddset (&thread_print_set, i);
+ thread_signals = 1;
+ }
+ }
+ }
+#endif
+}
+
+static void
+disable_thread_signals (void)
+{
+#ifdef GET_THREAD_SIGNALS
+ if (thread_signals)
+ {
+ int i;
+
+ for (i = 0; i < NSIG; i++)
+ {
+ if (sigismember (&thread_stop_set, i))
+ signal_stop_update (target_signal_from_host (i), 1);
+ if (sigismember (&thread_print_set, i))
+ signal_print_update (target_signal_from_host (i), 1);
+ }
+
+ thread_signals = 0;
+ }
+#endif
+}
+
+static void
+thread_db_push_target (void)
+{
+ using_thread_db = 1;
+
+ /* Push this target vector. */
+ push_target (&thread_db_ops);
+
+ enable_thread_event_reporting ();
+}
+
+static void
+thread_db_unpush_target (void)
+{
+ /* Unpush this target vector. */
+ unpush_target (&thread_db_ops);
+
+ using_thread_db = 0;
+}
+
+static void
+thread_db_new_objfile (struct objfile *objfile)
+{
+ td_err_e err;
+
+ if (using_thread_db)
+ /* Nothing to do. The thread library was already detected and the
+ target vector was already activated. */
+ goto quit;
+
+ if (objfile == NULL)
+ /* Un-interesting object file. */
+ goto quit;
+
+ /* Initialize the structure that identifies the child process. */
+ proc_handle.pid = GET_PID (inferior_pid);
+
+ /* Now attempt to open a connection to the thread library running in
+ the child process. */
+ err = td_ta_new_p (&proc_handle, &thread_agent);
+ switch (err)
+ {
+ case TD_NOLIBTHREAD:
+ /* No thread library found in the child process, probably
+ because the child process isn't running yet. */
+ break;
+
+ case TD_OK:
+ /* The thread library was detected in the child; we go live now! */
+ thread_db_push_target ();
+
+ /* Find all user-space threads. */
+ err = td_ta_thr_iter_p (thread_agent, find_new_threads_callback,
+ &inferior_pid, TD_THR_ANY_STATE,
+ TD_THR_LOWEST_PRIORITY, TD_SIGNO_MASK,
+ TD_THR_ANY_USER_FLAGS);
+ if (err != TD_OK)
+ error ("Finding new threads failed: %s", thread_db_err_str (err));
+ break;
+
+ default:
+ warning ("Cannot initialize thread debugging library: %s",
+ thread_db_err_str (err));
+ break;
+ }
+
+ quit:
+ if (target_new_objfile_chain)
+ target_new_objfile_chain (objfile);
+}
+
+static void
+attach_thread (int pid, const td_thrhandle_t *th_p,
+ const td_thrinfo_t *ti_p, int verbose)
+{
+ struct thread_info *tp;
+ td_err_e err;
+
+ check_thread_signals ();
+
+ if (verbose)
+ printf_unfiltered ("[New %s]\n", target_pid_to_str (pid));
+
+ /* Add the thread to GDB's thread list. */
+ tp = add_thread (pid);
+ tp->private = xmalloc (sizeof (struct private_thread_info));
+ tp->private->lwpid = ti_p->ti_lid;
+
+ /* Under Linux, we have to attach to each and every thread. */
+#ifdef ATTACH_LWP
+ if (ti_p->ti_lid != GET_PID (pid))
+ ATTACH_LWP (BUILD_LWP (ti_p->ti_lid, GET_PID (pid)), 0);
+#endif
+
+ /* Enable thread event reporting for this thread. */
+ err = td_thr_event_enable_p (th_p, 1);
+ if (err != TD_OK)
+ error ("Cannot enable thread event reporting for %s: %s",
+ target_pid_to_str (pid), thread_db_err_str (err));
+}
+
+static void
+detach_thread (int pid, int verbose)
+{
+ if (verbose)
+ printf_unfiltered ("[%s exited]\n", target_pid_to_str (pid));
+}
+
+static void
+thread_db_detach (char *args, int from_tty)
+{
+ disable_thread_event_reporting ();
+ thread_db_unpush_target ();
+
+ target_beneath->to_detach (args, from_tty);
+}
+
+static void
+thread_db_resume (int pid, int step, enum target_signal signo)
+{
+ struct cleanup *old_chain = save_inferior_pid ();
+
+ if (pid == -1)
+ inferior_pid = lwp_from_thread (inferior_pid);
+ else if (is_thread (pid))
+ pid = lwp_from_thread (pid);
+
+ target_beneath->to_resume (pid, step, signo);
+
+ do_cleanups (old_chain);
+}
+
+/* Check if PID is currently stopped at the location of a thread event
+ breakpoint location. If it is, read the event message and act upon
+ the event. */
+
+static void
+check_event (int pid)
+{
+ td_event_msg_t msg;
+ td_thrinfo_t ti;
+ td_err_e err;
+ CORE_ADDR stop_pc;
+
+ /* Bail out early if we're not at a thread event breakpoint. */
+ stop_pc = read_pc_pid (pid) - DECR_PC_AFTER_BREAK;
+ if (stop_pc != td_create_bp_addr && stop_pc != td_death_bp_addr)
+ return;
+
+ err = td_ta_event_getmsg_p (thread_agent, &msg);
+ if (err != TD_OK)
+ {
+ if (err == TD_NOMSG)
+ return;
+
+ error ("Cannot get thread event message: %s", thread_db_err_str (err));
+ }
+
+ err = td_thr_get_info_p (msg.th_p, &ti);
+ if (err != TD_OK)
+ error ("Cannot get thread info: %s", thread_db_err_str (err));
+
+ pid = BUILD_THREAD (ti.ti_tid, GET_PID (pid));
+
+ switch (msg.event)
+ {
+ case TD_CREATE:
+#if 0
+ /* FIXME: kettenis/2000-08-26: Since we use td_ta_event_getmsg,
+ there is no guarantee that the breakpoint will match the
+ event. Should we use td_thr_event_getmsg instead? */
+
+ if (stop_pc != td_create_bp_addr)
+ error ("Thread creation event doesn't match breakpoint.");
+#endif
+
+ if (in_thread_list (pid))
+ error ("Spurious thread creation event.");
+
+ attach_thread (pid, msg.th_p, &ti, 1);
+ return;
+
+ case TD_DEATH:
+#if 0
+ /* FIXME: See TD_CREATE. */
+
+ if (stop_pc != td_death_bp_addr)
+ error ("Thread death event doesn't match breakpoint.");
+#endif
+
+ if (! in_thread_list (pid))
+ error ("Spurious thread death event.");
+
+ detach_thread (pid, 1);
+ return;
+
+ default:
+ error ("Spurious thread event.");
+ }
+}
+
+static int
+thread_db_wait (int pid, struct target_waitstatus *ourstatus)
+{
+ extern int trap_pid;
+
+ if (pid != -1 && is_thread (pid))
+ pid = lwp_from_thread (pid);
+
+ pid = target_beneath->to_wait (pid, ourstatus);
+
+ if (ourstatus->kind == TARGET_WAITKIND_EXITED)
+ return -1;
+
+ if (ourstatus->kind == TARGET_WAITKIND_STOPPED
+ && ourstatus->value.sig == TARGET_SIGNAL_TRAP)
+ /* Check for a thread event. */
+ check_event (pid);
+
+ if (trap_pid)
+ trap_pid = thread_from_lwp (trap_pid);
+
+ return thread_from_lwp (pid);
+}
+
+static int
+thread_db_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
+ struct target_ops *target)
+{
+ struct cleanup *old_chain = save_inferior_pid ();
+ int xfer;
+
+ if (is_thread (inferior_pid))
+ {
+ /* FIXME: This seems to be necessary to make sure breakpoints
+ are removed. */
+ if (! target_thread_alive (inferior_pid))
+ inferior_pid = GET_PID (inferior_pid);
+ else
+ inferior_pid = lwp_from_thread (inferior_pid);
+ }
+
+ xfer = target_beneath->to_xfer_memory (memaddr, myaddr, len, write, target);
+
+ do_cleanups (old_chain);
+ return xfer;
+}
+
+static void
+thread_db_fetch_registers (int regno)
+{
+ td_thrhandle_t th;
+ prgregset_t gregset;
+ gdb_prfpregset_t fpregset;
+ td_err_e err;
+
+ if (! is_thread (inferior_pid))
+ {
+ /* Pass the request to the target beneath us. */
+ target_beneath->to_fetch_registers (regno);
+ return;
+ }
+
+ err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (inferior_pid), &th);
+ if (err != TD_OK)
+ error ("Cannot find thread %ld: %s",
+ (long) GET_THREAD (inferior_pid), thread_db_err_str (err));
+
+ err = td_thr_getgregs_p (&th, gregset);
+ if (err != TD_OK)
+ error ("Cannot fetch general-purpose registers for thread %ld: %s",
+ (long) GET_THREAD (inferior_pid), thread_db_err_str (err));
+
+ err = td_thr_getfpregs_p (&th, &fpregset);
+ if (err != TD_OK)
+ error ("Cannot get floating-point registers for thread %ld: %s",
+ (long) GET_THREAD (inferior_pid), thread_db_err_str (err));
+
+ /* Note that we must call supply_gregset after calling the thread_db
+ routines because the thread_db routines call ps_lgetgregs and
+ friends which clobber GDB's register cache. */
+ supply_gregset ((gdb_gregset_t *) gregset);
+ supply_fpregset (&fpregset);
+}
+
+static void
+thread_db_store_registers (int regno)
+{
+ td_thrhandle_t th;
+ prgregset_t gregset;
+ gdb_prfpregset_t fpregset;
+ td_err_e err;
+
+ if (! is_thread (inferior_pid))
+ {
+ /* Pass the request to the target beneath us. */
+ target_beneath->to_store_registers (regno);
+ return;
+ }
+
+ err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (inferior_pid), &th);
+ if (err != TD_OK)
+ error ("Cannot find thread %ld: %s",
+ (long) GET_THREAD (inferior_pid), thread_db_err_str (err));
+
+ if (regno != -1)
+ {
+ char raw[MAX_REGISTER_RAW_SIZE];
+
+ read_register_gen (regno, raw);
+ thread_db_fetch_registers (-1);
+ supply_register (regno, raw);
+ }
+
+ fill_gregset ((gdb_gregset_t *) gregset, -1);
+ fill_fpregset (&fpregset, -1);
+
+ err = td_thr_setgregs_p (&th, gregset);
+ if (err != TD_OK)
+ error ("Cannot store general-purpose registers for thread %ld: %s",
+ (long) GET_THREAD (inferior_pid), thread_db_err_str (err));
+ err = td_thr_setfpregs_p (&th, &fpregset);
+ if (err != TD_OK)
+ error ("Cannot store floating-point registers for thread %ld: %s",
+ (long) GET_THREAD (inferior_pid), thread_db_err_str (err));
+}
+
+static void
+thread_db_kill (void)
+{
+ target_beneath->to_kill ();
+}
+
+static void
+thread_db_create_inferior (char *exec_file, char *allargs, char **env)
+{
+ /* We never want to actually create the inferior! If this is ever
+ called, it means we were on the target stack when the user said
+ "run". But we don't want to be on the new inferior's target
+ stack until the libthread_db connection is ready to be made. So
+ we unpush ourselves from the stack, and then invoke
+ find_default_create_inferior, which will invoke the appropriate
+ process_stratum target to do the create. */
+
+ thread_db_unpush_target ();
+
+ find_default_create_inferior (exec_file, allargs, env);
+}
+
+static void
+thread_db_mourn_inferior (void)
+{
+ remove_thread_event_breakpoints ();
+ thread_db_unpush_target ();
+
+ target_beneath->to_mourn_inferior ();
+}
+
+static int
+thread_db_thread_alive (int pid)
+{
+ if (is_thread (pid))
+ {
+ td_thrhandle_t th;
+ td_err_e err;
+
+ err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (pid), &th);
+ if (err != TD_OK)
+ return 0;
+
+ err = td_thr_validate_p (&th);
+ if (err != TD_OK)
+ return 0;
+
+ return 1;
+ }
+
+ if (target_beneath->to_thread_alive)
+ return target_beneath->to_thread_alive (pid);
+
+ return 0;
+}
+
+static int
+find_new_threads_callback (const td_thrhandle_t *th_p, void *data)
+{
+ td_thrinfo_t ti;
+ td_err_e err;
+ int pid;
+
+ err = td_thr_get_info_p (th_p, &ti);
+ if (err != TD_OK)
+ error ("Cannot get thread info: %s", thread_db_err_str (err));
+
+ pid = BUILD_THREAD (ti.ti_tid, GET_PID (inferior_pid));
+
+ if (! in_thread_list (pid))
+ attach_thread (pid, th_p, &ti, 1);
+
+ return 0;
+}
+
+static void
+thread_db_find_new_threads (void)
+{
+ td_err_e err;
+
+ /* Iterate over all user-space threads to discover new threads. */
+ err = td_ta_thr_iter_p (thread_agent, find_new_threads_callback, NULL,
+ TD_THR_ANY_STATE, TD_THR_LOWEST_PRIORITY,
+ TD_SIGNO_MASK, TD_THR_ANY_USER_FLAGS);
+ if (err != TD_OK)
+ error ("Cannot find new threads: %s", thread_db_err_str (err));
+}
+
+static char *
+thread_db_pid_to_str (int pid)
+{
+ if (is_thread (pid))
+ {
+ static char buf[64];
+ td_thrhandle_t th;
+ td_thrinfo_t ti;
+ td_err_e err;
+
+ err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (pid), &th);
+ if (err != TD_OK)
+ error ("Cannot find thread %ld: %s",
+ (long) GET_THREAD (pid), thread_db_err_str (err));
+
+ err = td_thr_get_info_p (&th, &ti);
+ if (err != TD_OK)
+ error ("Cannot get thread info for thread %ld: %s",
+ (long) GET_THREAD (pid), thread_db_err_str (err));
+
+ if (ti.ti_state == TD_THR_ACTIVE && ti.ti_lid != 0)
+ {
+ snprintf (buf, sizeof (buf), "Thread %ld (LWP %d)",
+ (long) ti.ti_tid, ti.ti_lid);
+ }
+ else
+ {
+ snprintf (buf, sizeof (buf), "Thread %ld (%s)",
+ (long) ti.ti_tid, thread_db_state_str (ti.ti_state));
+ }
+
+ return buf;
+ }
+
+ if (target_beneath->to_pid_to_str (pid))
+ return target_beneath->to_pid_to_str (pid);
+
+ return normal_pid_to_str (pid);
+}
+
+static void
+init_thread_db_ops (void)
+{
+ thread_db_ops.to_shortname = "multi-thread";
+ thread_db_ops.to_longname = "multi-threaded child process.";
+ thread_db_ops.to_doc = "Threads and pthreads support.";
+ thread_db_ops.to_detach = thread_db_detach;
+ thread_db_ops.to_resume = thread_db_resume;
+ thread_db_ops.to_wait = thread_db_wait;
+ thread_db_ops.to_fetch_registers = thread_db_fetch_registers;
+ thread_db_ops.to_store_registers = thread_db_store_registers;
+ thread_db_ops.to_xfer_memory = thread_db_xfer_memory;
+ thread_db_ops.to_kill = thread_db_kill;
+ thread_db_ops.to_create_inferior = thread_db_create_inferior;
+ thread_db_ops.to_mourn_inferior = thread_db_mourn_inferior;
+ thread_db_ops.to_thread_alive = thread_db_thread_alive;
+ thread_db_ops.to_find_new_threads = thread_db_find_new_threads;
+ thread_db_ops.to_pid_to_str = thread_db_pid_to_str;
+ thread_db_ops.to_stratum = thread_stratum;
+ thread_db_ops.to_has_thread_control = tc_schedlock;
+ thread_db_ops.to_magic = OPS_MAGIC;
+}
+
+void
+_initialize_thread_db (void)
+{
+ /* Only initialize the module if we can load libthread_db. */
+ if (thread_db_load ())
+ {
+ init_thread_db_ops ();
+ add_target (&thread_db_ops);
+
+ /* Add ourselves to objfile event chain. */
+ target_new_objfile_chain = target_new_objfile_hook;
+ target_new_objfile_hook = thread_db_new_objfile;
+ }
+}
projects / external / binutils.git / commitdiff