Input: goodix - use generic touchscreen_properties

Use touchscreen_properties structure instead of implementing all
properties by our own. It allows us to reuse generic code for parsing
device-tree properties (which was implemented manually in the driver for
now). Additionally, it allows us to report events using generic
touchscreen_report_pos(), which automatically handles inverted and
swapped axes.

This fixes the issue with the custom code incorrectly handling case where
ts->inverted_x and ts->swapped_x_y were true, but ts->inverted_y was
false. Assuming we have 720x1280 touch panel, ts->abs_x_max == 1279 and
ts->abs_y_max == 719 (because we inverted that in goodix_read_config()).
Now let's assume that we received event from (0:0) position (in touch
panel original coordinates). In function goodix_ts_report_touch() we
calculate input_x as 1279, but after swapping input_y takes that value
(which is more that maximum 719 value reported during initialization).

Note that since touchscreen coordinates are 0-indexed, we now report
touchscreen range as (0:size-1).

Developed and tested on custom DT-based device with gt1151 touch
panel.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
[dtor: fix endianness annotation reported by sparse, handle errors when
 initializing MT slots]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index ecec8eb..9736c83 100644 (file)
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -22,6 +22,7 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
@@ -43,11 +44,7 @@ struct goodix_ts_data {
        struct i2c_client *client;
        struct input_dev *input_dev;
        const struct goodix_chip_data *chip;
-       int abs_x_max;
-       int abs_y_max;
-       bool swapped_x_y;
-       bool inverted_x;
-       bool inverted_y;
+       struct touchscreen_properties prop;
        unsigned int max_touch_num;
        unsigned int int_trigger_type;
        struct gpio_desc *gpiod_int;
@@ -160,7 +157,7 @@ static int goodix_i2c_read(struct i2c_client *client,
                           u16 reg, u8 *buf, int len)
 {
        struct i2c_msg msgs[2];
-       u16 wbuf = cpu_to_be16(reg);
+       __be16 wbuf = cpu_to_be16(reg);
        int ret;
 
        msgs[0].flags = 0;
@@ -295,18 +292,10 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
        int input_y = get_unaligned_le16(&coor_data[3]);
        int input_w = get_unaligned_le16(&coor_data[5]);
 
-       /* Inversions have to happen before axis swapping */
-       if (ts->inverted_x)
-               input_x = ts->abs_x_max - input_x;
-       if (ts->inverted_y)
-               input_y = ts->abs_y_max - input_y;
-       if (ts->swapped_x_y)
-               swap(input_x, input_y);
-
        input_mt_slot(ts->input_dev, id);
        input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
-       input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x);
-       input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, input_y);
+       touchscreen_report_pos(ts->input_dev, &ts->prop,
+                              input_x, input_y, true);
        input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w);
        input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
 }
@@ -579,44 +568,27 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 static void goodix_read_config(struct goodix_ts_data *ts)
 {
        u8 config[GOODIX_CONFIG_MAX_LENGTH];
+       int x_max, y_max;
        int error;
 
        error = goodix_i2c_read(ts->client, ts->chip->config_addr,
                                config, ts->chip->config_len);
        if (error) {
-               dev_warn(&ts->client->dev,
-                        "Error reading config (%d), using defaults\n",
+               dev_warn(&ts->client->dev, "Error reading config: %d\n",
                         error);
-               ts->abs_x_max = GOODIX_MAX_WIDTH;
-               ts->abs_y_max = GOODIX_MAX_HEIGHT;
-               if (ts->swapped_x_y)
-                       swap(ts->abs_x_max, ts->abs_y_max);
                ts->int_trigger_type = GOODIX_INT_TRIGGER;
                ts->max_touch_num = GOODIX_MAX_CONTACTS;
                return;
        }
 
-       ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
-       ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
-       if (ts->swapped_x_y)
-               swap(ts->abs_x_max, ts->abs_y_max);
        ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
        ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
-       if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) {
-               dev_err(&ts->client->dev,
-                       "Invalid config, using defaults\n");
-               ts->abs_x_max = GOODIX_MAX_WIDTH;
-               ts->abs_y_max = GOODIX_MAX_HEIGHT;
-               if (ts->swapped_x_y)
-                       swap(ts->abs_x_max, ts->abs_y_max);
-               ts->max_touch_num = GOODIX_MAX_CONTACTS;
-       }
 
-       if (dmi_check_system(rotated_screen)) {
-               ts->inverted_x = true;
-               ts->inverted_y = true;
-               dev_dbg(&ts->client->dev,
-                        "Applying '180 degrees rotated screen' quirk\n");
+       x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
+       y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
+       if (x_max && y_max) {
+               input_abs_set_max(ts->input_dev, ABS_MT_POSITION_X, x_max - 1);
+               input_abs_set_max(ts->input_dev, ABS_MT_POSITION_Y, y_max - 1);
        }
 }
 
@@ -676,32 +648,28 @@ static int goodix_i2c_test(struct i2c_client *client)
 }
 
 /**
- * goodix_request_input_dev - Allocate, populate and register the input device
+ * goodix_configure_dev - Finish device initialization
  *
  * @ts: our goodix_ts_data pointer
  *
- * Must be called during probe
+ * Must be called from probe to finish initialization of the device.
+ * Contains the common initialization code for both devices that
+ * declare gpio pins and devices that do not. It is either called
+ * directly from probe or from request_firmware_wait callback.
  */
-static int goodix_request_input_dev(struct goodix_ts_data *ts)
+static int goodix_configure_dev(struct goodix_ts_data *ts)
 {
        int error;
 
+       ts->int_trigger_type = GOODIX_INT_TRIGGER;
+       ts->max_touch_num = GOODIX_MAX_CONTACTS;
+
        ts->input_dev = devm_input_allocate_device(&ts->client->dev);
        if (!ts->input_dev) {
                dev_err(&ts->client->dev, "Failed to allocate input device.");
                return -ENOMEM;
        }
 
-       input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X,
-                            0, ts->abs_x_max, 0, 0);
-       input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y,
-                            0, ts->abs_y_max, 0, 0);
-       input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
-       input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
-
-       input_mt_init_slots(ts->input_dev, ts->max_touch_num,
-                           INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
-
        ts->input_dev->name = "Goodix Capacitive TouchScreen";
        ts->input_dev->phys = "input/ts";
        ts->input_dev->id.bustype = BUS_I2C;
@@ -712,42 +680,49 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts)
        /* Capacitive Windows/Home button on some devices */
        input_set_capability(ts->input_dev, EV_KEY, KEY_LEFTMETA);
 
-       error = input_register_device(ts->input_dev);
-       if (error) {
-               dev_err(&ts->client->dev,
-                       "Failed to register input device: %d", error);
-               return error;
-       }
+       input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_X);
+       input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_Y);
+       input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
+       input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
 
-       return 0;
-}
+       /* Read configuration and apply touchscreen parameters */
+       goodix_read_config(ts);
 
-/**
- * goodix_configure_dev - Finish device initialization
- *
- * @ts: our goodix_ts_data pointer
- *
- * Must be called from probe to finish initialization of the device.
- * Contains the common initialization code for both devices that
- * declare gpio pins and devices that do not. It is either called
- * directly from probe or from request_firmware_wait callback.
- */
-static int goodix_configure_dev(struct goodix_ts_data *ts)
-{
-       int error;
+       /* Try overriding touchscreen parameters via device properties */
+       touchscreen_parse_properties(ts->input_dev, true, &ts->prop);
 
-       ts->swapped_x_y = device_property_read_bool(&ts->client->dev,
-                                                   "touchscreen-swapped-x-y");
-       ts->inverted_x = device_property_read_bool(&ts->client->dev,
-                                                  "touchscreen-inverted-x");
-       ts->inverted_y = device_property_read_bool(&ts->client->dev,
-                                                  "touchscreen-inverted-y");
+       if (!ts->prop.max_x || !ts->prop.max_y || !ts->max_touch_num) {
+               dev_err(&ts->client->dev, "Invalid config, using defaults\n");
+               ts->prop.max_x = GOODIX_MAX_WIDTH - 1;
+               ts->prop.max_y = GOODIX_MAX_HEIGHT - 1;
+               ts->max_touch_num = GOODIX_MAX_CONTACTS;
+               input_abs_set_max(ts->input_dev,
+                                 ABS_MT_POSITION_X, ts->prop.max_x);
+               input_abs_set_max(ts->input_dev,
+                                 ABS_MT_POSITION_Y, ts->prop.max_y);
+       }
 
-       goodix_read_config(ts);
+       if (dmi_check_system(rotated_screen)) {
+               ts->prop.invert_x = true;
+               ts->prop.invert_y = true;
+               dev_dbg(&ts->client->dev,
+                       "Applying '180 degrees rotated screen' quirk\n");
+       }
 
-       error = goodix_request_input_dev(ts);
-       if (error)
+       error = input_mt_init_slots(ts->input_dev, ts->max_touch_num,
+                                   INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+       if (error) {
+               dev_err(&ts->client->dev,
+                       "Failed to initialize MT slots: %d", error);
+               return error;
+       }
+
+       error = input_register_device(ts->input_dev);
+       if (error) {
+               dev_err(&ts->client->dev,
+                       "Failed to register input device: %d", error);
                return error;
+       }
 
        ts->irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT;
        error = goodix_request_irq(ts);