size expressions. This version only supports two kinds. */
/* The fields are:
- How far Forward this mode will reach:
- How far Backward this mode will reach:
- How many bytes this mode will add to the size of the frag
- Which mode to go to if the offset won't fit in this one */
-
-relax_typeS md_relax_table[] = {
- {1, 1, 0, 0}, /* First entries aren't used */
- {1, 1, 0, 0}, /* For no good reason except */
- {1, 1, 0, 0}, /* that the VAX doesn't either */
+ How far Forward this mode will reach.
+ How far Backward this mode will reach.
+ How many bytes this mode will add to the size of the frag.
+ Which mode to go to if the offset won't fit in this one. */
+
+relax_typeS md_relax_table[] =
+{
+ {1, 1, 0, 0}, /* First entries aren't used. */
+ {1, 1, 0, 0}, /* For no good reason except. */
+ {1, 1, 0, 0}, /* that the VAX doesn't either. */
{1, 1, 0, 0},
/* Relax for bcc <L>.
}
alias;
-static alias alias_opcodes[] = {
+static alias alias_opcodes[] =
+{
{"cpd", "cmpd"},
{"cpx", "cmpx"},
{"cpy", "cmpy"},
{0, 0}
};
-/* local functions */
-static register_id reg_name_search PARAMS ((char *name));
-static register_id register_name PARAMS (());
-static int check_range PARAMS ((long num, int mode));
-
+/* Local functions. */
+static register_id reg_name_search PARAMS ((char *));
+static register_id register_name PARAMS ((void));
+static int check_range PARAMS ((long, int));
static void print_opcode_list PARAMS ((void));
-
static void get_default_target PARAMS ((void));
-static void print_insn_format PARAMS ((char *name));
-static int get_operand PARAMS ((operand * op, int first, long opmode));
-static void fixup8 PARAMS ((expressionS * oper, int mode, int opmode));
-static void fixup16 PARAMS ((expressionS * oper, int mode, int opmode));
+static void print_insn_format PARAMS ((char *));
+static int get_operand PARAMS ((operand *, int, long));
+static void fixup8 PARAMS ((expressionS *, int, int));
+static void fixup16 PARAMS ((expressionS *, int, int));
static struct m68hc11_opcode *find_opcode
-PARAMS (
- (struct m68hc11_opcode_def * opc, operand operands[],
- int *nb_operands));
+ PARAMS ((struct m68hc11_opcode_def *, operand *, int *));
static void build_jump_insn
-PARAMS (
- (struct m68hc11_opcode * opcode, operand operands[], int nb_operands,
- int optimize));
-
-static void build_insn PARAMS ((struct m68hc11_opcode * opcode,
- operand operands[], int nb_operands));
+ PARAMS ((struct m68hc11_opcode *, operand *, int, int));
+static void build_insn
+ PARAMS ((struct m68hc11_opcode *, operand *, int));
/* Controls whether relative branches can be turned into long branches.
When the relative offset is too large, the insn are changed:
jmp L
dbcc -> db!cc +3
jmp L
-
+
Setting the flag forbidds this. */
static short flag_fixed_branchs = 0;
pseudo-op name without dot
function to call to execute this pseudo-op
Integer arg to pass to the function. */
-const pseudo_typeS md_pseudo_table[] = {
+const pseudo_typeS md_pseudo_table[] =
+{
/* The following pseudo-ops are supported for MRI compatibility. */
{"fcb", cons, 1},
{"fdb", cons, 2},
{0, 0, 0}
};
-
\f
/* Options and initialization. */
CONST char *md_shortopts = "Sm:";
-struct option md_longopts[] = {
+struct option md_longopts[] =
+{
#define OPTION_FORCE_LONG_BRANCH (OPTION_MD_BASE)
{"force-long-branchs", no_argument, NULL, OPTION_FORCE_LONG_BRANCH},
return 0;
}
-
void
md_show_usage (stream)
FILE *stream;
return 0;
}
-/* Equal to MAX_PRECISION in atof-ieee.c */
+/* Equal to MAX_PRECISION in atof-ieee.c. */
#define MAX_LITTLENUMS 6
/* Turn a string in input_line_pointer into a floating point constant
of type TYPE, and store the appropriate bytes in *LITP. The number
of LITTLENUMS emitted is stored in *SIZEP. An error message is
returned, or NULL on OK. */
-
char *
md_atof (type, litP, sizeP)
char type;
return ((addr + (1 << align) - 1) & (-1 << align));
}
-
static int
cmp_opcode (op1, op2)
struct m68hc11_opcode *op1;
m68hc11_init_after_args ()
{
}
-
\f
/* Builtin help. */
int example = flag_print_opcodes == 2;
if (example)
- {
- printf (_("# Example of `%s' instructions\n\t.sect .text\n_start:\n"),
- default_cpu);
- }
+ printf (_("# Example of `%s' instructions\n\t.sect .text\n_start:\n"),
+ default_cpu);
opcodes = m68hc11_sorted_opcodes;
printf ("\n");
}
-
/* Print the instruction format. This operation is called when some
instruction is not correct. Instruction format is printed as an
error message. */
}
while (strcmp (opcode->name, name) == 0);
}
-
\f
/* Analysis of 68HC11 and 68HC12 operands. */
return p;
}
-/* register_name() checks the string at input_line_pointer
+/* Check the string at input_line_pointer
to see if it is a valid register name. */
static register_id
register_name ()
if (c)
*p++ = 0;
- /* look to see if it's in the register table. */
+ /* Look to see if it's in the register table. */
reg_number = reg_name_search (input_line_pointer);
if (reg_number != REG_NONE)
{
return reg_number;
}
-/* get_operands parses a string of operands and returns
- an array of expressions.
+/* Parse a string of operands and return an array of expressions.
Operand mode[0] mode[1] exp[0] exp[1]
#n M6811_OP_IMM16 - O_*
n,r+ M6812_POST_INC " "
A,r B,r D,r M6811_OP_REG M6812_OP_REG O_register O_register
[D,r] M6811_OP_IDX_2 M6812_OP_REG O_register O_register
- [n,r] M6811_OP_IDX_1 M6812_OP_REG O_constant O_register
-
-*/
-
+ [n,r] M6811_OP_IDX_1 M6812_OP_REG O_constant O_register */
static int
get_operand (oper, which, opmode)
operand *oper;
if (!(opmode & (M6811_OP_IMM8 | M6811_OP_IMM16 | M6811_OP_BITMASK)))
{
as_bad (_("Immediate operand is not allowed for operand %d."),
- which);
+ which);
return -1;
}
input_line_pointer = p;
reg = register_name ();
- /* Backtrack... */
+ /* Backtrack. */
if (which == 0 && opmode & M6812_OP_IDX_P2
&& reg != REG_X && reg != REG_Y
&& reg != REG_PC && reg != REG_SP)
/* If the mode is not known until now, this is either a label
or an indirect address. */
if (mode == M6811_OP_NONE)
- {
- mode = M6811_OP_IND16 | M6811_OP_JUMP_REL;
- }
+ mode = M6811_OP_IND16 | M6811_OP_JUMP_REL;
p = input_line_pointer;
while (*p == ' ' || *p == '\t')
{
/* Auto increment and decrement are ok for [-8..8] without 0. */
if (mode & M6812_AUTO_INC_DEC)
- {
- return (num != 0 && num <= 8 && num >= -8);
- }
+ return (num != 0 && num <= 8 && num >= -8);
/* The 68HC12 supports 5, 9 and 16-bits offsets. */
if (mode & (M6812_INDEXED_IND | M6812_INDEXED | M6812_OP_IDX))
- {
- mode = M6811_OP_IND16;
- }
+ mode = M6811_OP_IND16;
if (mode & M6812_OP_JUMP_REL16)
mode = M6811_OP_IND16;
return 0;
}
}
-
\f
/* Gas fixup generation. */
if (!check_range (oper->X_add_number, mode))
{
as_bad (_("Operand out of 16-bit range: `%ld'."),
- oper->X_add_number);
+ oper->X_add_number);
}
number_to_chars_bigendian (f, oper->X_add_number & 0x0FFFF, 2);
}
as_fatal (_("Operand `%x' not recognized in fixup16."), oper->X_op);
}
}
-
\f
/* 68HC11 and 68HC12 code generation. */
/* Start a new insn that contains at least 'size' bytes. Record the
line information of that insn in the dwarf2 debug sections. */
-static char*
+static char *
m68hc11_new_insn (size)
int size;
{
- char* f;
+ char *f;
f = frag_more (size);
if (debug_type == DEBUG_DWARF2)
{
bfd_vma addr;
-
+
dwarf2_where (&debug_line);
addr = frag_now->fr_address + frag_now_fix () - size;
dwarf2_gen_line_info (addr, &debug_line);
if (!check_range (val, mode))
{
as_bad (_("Increment/decrement value is out of range: `%ld'."),
- val);
+ val);
}
if (mode & (M6812_POST_INC | M6812_PRE_INC))
byte |= (val - 1) & 0x07;
}
f = frag_more (1);
number_to_chars_bigendian (f, byte, 1);
- /*
- fix_new_exp (frag_now, f - frag_now->fr_literal, 2,
- &op->exp, false, BFD_RELOC_16); */
+#if 0
+ fix_new_exp (frag_now, f - frag_now->fr_literal, 2,
+ &op->exp, false, BFD_RELOC_16);
+#endif
frag_var (rs_machine_dependent, 2, 2,
ENCODE_RELAX (STATE_INDEXED_OFFSET, STATE_UNDF),
op->exp.X_add_symbol, val, f);
fixup16 (&operands[1].exp, M6811_OP_IND16, operands[1].mode);
}
}
-
\f
/* Opcode identification and operand analysis. */
return opcode;
}
-
/* Find the real opcode and its associated operands. We use a progressive
approach here. On entry, 'opc' points to the first opcode in the
table that matches the opcode name in the source line. We try to
result = get_operand (&operands[i], i, opc->format);
if (result <= 0)
- {
- return 0;
- }
+ return 0;
/* Special case where the bitmask of the bclr/brclr
instructions is not introduced by #.
{
opcode = find (opc, operands, i);
if (opcode)
- {
- return opcode;
- }
+ return opcode;
}
if (*input_line_pointer == ',')
input_line_pointer++;
}
+
return 0;
}
#define M6812_XBCC_MARKER (M6812_OP_TBCC_MARKER \
| M6812_OP_DBCC_MARKER \
| M6812_OP_IBCC_MARKER)
-
\f
/* Gas line assembler entry point. */
int branch_optimize = 0;
int alias_id = -1;
- /* Drop leading whitespace */
+ /* Drop leading whitespace. */
while (*str == ' ')
str++;
if (alias_id >= 0)
{
char *f = m68hc11_new_insn (m68hc12_alias[alias_id].size);
-
+
number_to_chars_bigendian (f, m68hc12_alias[alias_id].code1, 1);
if (m68hc12_alias[alias_id].size > 1)
number_to_chars_bigendian (f + 1, m68hc12_alias[alias_id].code2, 1);
else
build_insn (opcode, operands, nb_operands);
}
-
\f
/* Relocation, relaxation and frag conversions. */
-
long
md_pcrel_from_section (fixp, sec)
fixS *fixp;
int adjust;
if (fixp->fx_addsy != (symbolS *) NULL
&& (!S_IS_DEFINED (fixp->fx_addsy)
- || (S_GET_SEGMENT (fixp->fx_addsy) != sec)))
+ || (S_GET_SEGMENT (fixp->fx_addsy) != sec)))
return 0;
adjust = fixp->fx_pcrel_adjust;
case ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_WORD):
/* Invert branch. */
fragP->fr_opcode[0] ^= 1;
- fragP->fr_opcode[1] = 3; /* Branch offset */
+ fragP->fr_opcode[1] = 3; /* Branch offset. */
buffer_address[0] = M6811_JMP;
fix_new (fragP, fragP->fr_fix + 1, 2,
fragP->fr_symbol, fragP->fr_offset, 0, BFD_RELOC_16);
}
else
{
- fragP->fr_opcode[0] ^= 1; /* Reverse sense of branch. */
- fragP->fr_opcode[1] = 3; /* Skip next jmp insn (3 bytes) */
+ fragP->fr_opcode[0] ^= 1; /* Reverse sense of branch. */
+ fragP->fr_opcode[1] = 3; /* Skip next jmp insn (3 bytes). */
/* Don't use fr_opcode[2] because this may be
in a different frag. */
}
else
{
- fragP->fr_opcode[0] ^= 0x20; /* Reverse sense of branch. */
+ fragP->fr_opcode[0] ^= 0x20; /* Reverse sense of branch. */
fragP->fr_opcode[1] = 3; /* Skip next jmp insn (3 bytes). */
/* Don't use fr_opcode[2] because this may be
case BFD_RELOC_M68HC11_HI8:
value = value >> 8;
- /* Fall through */
+ /* Fall through. */
case BFD_RELOC_M68HC11_LO8:
case BFD_RELOC_8:
- /*bfd_putb8 ((bfd_vma) value, (unsigned char *) where); */
+#if 0
+ bfd_putb8 ((bfd_vma) value, (unsigned char *) where);
+#endif
((bfd_byte *) where)[0] = (bfd_byte) value;
break;
case BFD_RELOC_8_PCREL:
- /*bfd_putb8 ((bfd_vma) value, (unsigned char *) where); */
+#if 0
+ bfd_putb8 ((bfd_vma) value, (unsigned char *) where);
+#endif
((bfd_byte *) where)[0] = (bfd_byte) value;
if (value < -128 || value > 127)
as_fatal (_("Line %d: unknown relocation type: 0x%x."),
fixp->fx_line, fixp->fx_r_type);
}
+
return 0;
}
segT saved_seg;
subsegT saved_subseg;
segT debug_info;
- char* p;
+ char *p;
long total_size = 0;
-
+
if (debug_type != DEBUG_DWARF2)
return;
-
+
dwarf2_finish ();
saved_seg = now_seg;
subseg_set (debug_info, 0);
p = frag_more (10);
total_size = 12;
-
+
# define STUFF(val,size) md_number_to_chars (p, val, size); p += size;
STUFF (total_size, 4); /* Length of compilation unit. */
STUFF (2, 2); /* Dwarf version */
projects / external / binutils.git / commitdiff