drm/i915: Clean up leftover DPLL and LVDS register choice from pch split.

We used to have these from the product of (pch, non-pch) * (pipe a,
pipe b).  Now we can just use the nice per-pipe reg macros in the
split out crtc_mode_sets.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 832210b..39bf389 100644 (file)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4527,7 +4527,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
        int pipe = intel_crtc->pipe;
        int plane = intel_crtc->plane;
-       u32 fp_reg, dpll_reg;
        int refclk, num_connectors = 0;
        intel_clock_t clock, reduced_clock;
        u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
@@ -4537,7 +4536,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
        struct intel_encoder *encoder;
        const intel_limit_t *limit;
        int ret;
-       u32 reg, temp;
+       u32 temp;
        u32 lvds_sync = 0;
 
        list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
@@ -4743,13 +4742,10 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
        DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
        drm_mode_debug_printmodeline(mode);
 
-       fp_reg = FP0(pipe);
-       dpll_reg = DPLL(pipe);
+       I915_WRITE(FP0(pipe), fp);
+       I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
 
-       I915_WRITE(fp_reg, fp);
-       I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
-
-       POSTING_READ(dpll_reg);
+       POSTING_READ(DPLL(pipe));
        udelay(150);
 
        /* The LVDS pin pair needs to be on before the DPLLs are enabled.
@@ -4757,9 +4753,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
         * things on.
         */
        if (is_lvds) {
-               reg = LVDS;
-
-               temp = I915_READ(reg);
+               temp = I915_READ(LVDS);
                temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
                if (pipe == 1) {
                        temp |= LVDS_PIPEB_SELECT;
@@ -4803,17 +4797,17 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
                        temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
                        temp |= lvds_sync;
                }
-               I915_WRITE(reg, temp);
+               I915_WRITE(LVDS, temp);
        }
 
        if (is_dp) {
                intel_dp_set_m_n(crtc, mode, adjusted_mode);
        }
 
-       I915_WRITE(dpll_reg, dpll);
+       I915_WRITE(DPLL(pipe), dpll);
 
        /* Wait for the clocks to stabilize. */
-       POSTING_READ(dpll_reg);
+       POSTING_READ(DPLL(pipe));
        udelay(150);
 
        if (INTEL_INFO(dev)->gen >= 4) {
@@ -4832,19 +4826,19 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
                 *
                 * So write it again.
                 */
-               I915_WRITE(dpll_reg, dpll);
+               I915_WRITE(DPLL(pipe), dpll);
        }
 
        intel_crtc->lowfreq_avail = false;
        if (is_lvds && has_reduced_clock && i915_powersave) {
-               I915_WRITE(fp_reg + 4, fp2);
+               I915_WRITE(FP1(pipe), fp2);
                intel_crtc->lowfreq_avail = true;
                if (HAS_PIPE_CXSR(dev)) {
                        DRM_DEBUG_KMS("enabling CxSR downclocking\n");
                        pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
                }
        } else {
-               I915_WRITE(fp_reg + 4, fp);
+               I915_WRITE(FP1(pipe), fp);
                if (HAS_PIPE_CXSR(dev)) {
                        DRM_DEBUG_KMS("disabling CxSR downclocking\n");
                        pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
@@ -4920,7 +4914,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
        int pipe = intel_crtc->pipe;
        int plane = intel_crtc->plane;
-       u32 fp_reg, dpll_reg;
        int refclk, num_connectors = 0;
        intel_clock_t clock, reduced_clock;
        u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
@@ -4932,7 +4925,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
        const intel_limit_t *limit;
        int ret;
        struct fdi_m_n m_n = {0};
-       u32 reg, temp;
+       u32 temp;
        u32 lvds_sync = 0;
        int target_clock, pixel_multiplier, lane, link_bw, bpp, factor;
 
@@ -5238,16 +5231,12 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
        DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
        drm_mode_debug_printmodeline(mode);
 
-       /* assign to Ironlake registers */
-       fp_reg = PCH_FP0(pipe);
-       dpll_reg = PCH_DPLL(pipe);
-
        /* PCH eDP needs FDI, but CPU eDP does not */
        if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
-               I915_WRITE(fp_reg, fp);
-               I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
+               I915_WRITE(PCH_FP0(pipe), fp);
+               I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
 
-               POSTING_READ(dpll_reg);
+               POSTING_READ(PCH_DPLL(pipe));
                udelay(150);
        }
 
@@ -5279,9 +5268,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
         * things on.
         */
        if (is_lvds) {
-               reg = PCH_LVDS;
-
-               temp = I915_READ(reg);
+               temp = I915_READ(PCH_LVDS);
                temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
                if (pipe == 1) {
                        if (HAS_PCH_CPT(dev))
@@ -5324,7 +5311,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                        temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
                        temp |= lvds_sync;
                }
-               I915_WRITE(reg, temp);
+               I915_WRITE(PCH_LVDS, temp);
        }
 
        /* set the dithering flag and clear for anything other than a panel. */
@@ -5347,10 +5334,10 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 
        if (!has_edp_encoder ||
            intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
-               I915_WRITE(dpll_reg, dpll);
+               I915_WRITE(PCH_DPLL(pipe), dpll);
 
                /* Wait for the clocks to stabilize. */
-               POSTING_READ(dpll_reg);
+               POSTING_READ(PCH_DPLL(pipe));
                udelay(150);
 
                /* The pixel multiplier can only be updated once the
@@ -5358,19 +5345,19 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                 *
                 * So write it again.
                 */
-               I915_WRITE(dpll_reg, dpll);
+               I915_WRITE(PCH_DPLL(pipe), dpll);
        }
 
        intel_crtc->lowfreq_avail = false;
        if (is_lvds && has_reduced_clock && i915_powersave) {
-               I915_WRITE(fp_reg + 4, fp2);
+               I915_WRITE(PCH_FP1(pipe), fp2);
                intel_crtc->lowfreq_avail = true;
                if (HAS_PIPE_CXSR(dev)) {
                        DRM_DEBUG_KMS("enabling CxSR downclocking\n");
                        pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
                }
        } else {
-               I915_WRITE(fp_reg + 4, fp);
+               I915_WRITE(PCH_FP1(pipe), fp);
                if (HAS_PIPE_CXSR(dev)) {
                        DRM_DEBUG_KMS("disabling CxSR downclocking\n");
                        pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;