[media] dt-bindings: add TI VPIF documentation
authorKevin Hilman <khilman@baylibre.com>
Wed, 7 Dec 2016 18:30:24 +0000 (16:30 -0200)
committerMauro Carvalho Chehab <mchehab@s-opensource.com>
Tue, 31 Jan 2017 10:01:39 +0000 (08:01 -0200)
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Documentation/devicetree/bindings/media/ti,da850-vpif.txt [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
new file mode 100644 (file)
index 0000000..6d25d7f
--- /dev/null
@@ -0,0 +1,83 @@
+Texas Instruments VPIF
+----------------------
+
+The TI Video Port InterFace (VPIF) is the primary component for video
+capture and display on the DA850/AM18x family of TI DaVinci/Sitara
+SoCs.
+
+TI Document reference: SPRUH82C, Chapter 35
+http://www.ti.com/lit/pdf/spruh82
+
+Required properties:
+- compatible: must be "ti,da850-vpif"
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain IRQ line for the VPIF
+
+Video Capture:
+
+VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a
+single 16-bit channel.  It should contain at least one port child node
+with child 'endpoint' node. Please refer to the bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example using 2 8-bit input channels, one of which is connected to an
+I2C-connected TVP5147 decoder:
+
+       vpif: vpif@217000 {
+               compatible = "ti,da850-vpif";
+               reg = <0x217000 0x1000>;
+               interrupts = <92>;
+
+               port {
+                       vpif_ch0: endpoint@0 {
+                                 reg = <0>;
+                                 bus-width = <8>;
+                                 remote-endpoint = <&composite>;
+                       };
+
+                       vpif_ch1: endpoint@1 {
+                                 reg = <1>;
+                                 bus-width = <8>;
+                                 data-shift = <8>;
+                       };
+               };
+       };
+
+[ ... ]
+
+&i2c0 {
+
+       tvp5147@5d {
+               compatible = "ti,tvp5147";
+               reg = <0x5d>;
+               status = "okay";
+
+               port {
+                       composite: endpoint {
+                               hsync-active = <1>;
+                               vsync-active = <1>;
+                               pclk-sample = <0>;
+
+                               /* VPIF channel 0 (lower 8-bits) */
+                               remote-endpoint = <&vpif_ch0>;
+                               bus-width = <8>;
+                       };
+               };
+       };
+};
+
+
+Alternatively, an example when the bus is configured as a single
+16-bit input (e.g. for raw-capture mode):
+
+       vpif: vpif@217000 {
+               compatible = "ti,da850-vpif";
+               reg = <0x217000 0x1000>;
+               interrupts = <92>;
+
+               port {
+                       vpif_ch0: endpoint {
+                                 bus-width = <16>;
+                       };
+               };
+       };