}
}
+
+/* Returns true value if the second slot of a two-slot controller is empty */
+static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
+{
+ struct pci_dev *func;
+ struct yenta_socket *slot2;
+ int devfn;
+ unsigned int state;
+ int ret = 1;
+
+ /* catch the two-slot controllers */
+ switch (socket->dev->device) {
+ case PCI_DEVICE_ID_TI_1220:
+ case PCI_DEVICE_ID_TI_1221:
+ case PCI_DEVICE_ID_TI_1225:
+ case PCI_DEVICE_ID_TI_1251A:
+ case PCI_DEVICE_ID_TI_1251B:
+ case PCI_DEVICE_ID_TI_1420:
+ case PCI_DEVICE_ID_TI_1450:
+ case PCI_DEVICE_ID_TI_1451A:
+ case PCI_DEVICE_ID_TI_1520:
+ case PCI_DEVICE_ID_TI_1620:
+ case PCI_DEVICE_ID_TI_4520:
+ case PCI_DEVICE_ID_TI_4450:
+ case PCI_DEVICE_ID_TI_4451:
+ /*
+ * there are way more, but they need to be added in yenta_socket.c
+ * and pci_ids.h first anyway.
+ */
+ break;
+
+ /* single-slot controllers have the 2nd slot empty always :) */
+ default:
+ return 1;
+ }
+
+ /* get other slot */
+ devfn = socket->dev->devfn & ~0x07;
+ func = pci_get_slot(socket->dev->bus,
+ (socket->dev->devfn & 0x07) ? devfn : devfn | 0x01);
+ if (!func)
+ return 1;
+
+ slot2 = pci_get_drvdata(func);
+ if (!slot2)
+ goto out;
+
+ /* check state */
+ yenta_get_status(&socket->socket, &state);
+ if (state & SS_DETECT) {
+ ret = 0;
+ goto out;
+ }
+
+out:
+ pci_dev_put(func);
+ return ret;
+}
+
+/*
+ * TI specifiy parts for the power hook.
+ *
+ * some TI's with some CB's produces interrupt storm on power on. it has been
+ * seen with atheros wlan cards on TI1225 and TI1410. solution is simply to
+ * disable any CB interrupts during this time.
+ */
+static int ti12xx_power_hook(struct pcmcia_socket *sock, int operation)
+{
+ struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
+ u32 mfunc, devctl, sysctl;
+ u8 gpio3;
+
+ /* only POWER_PRE and POWER_POST are interesting */
+ if ((operation != HOOK_POWER_PRE) && (operation != HOOK_POWER_POST))
+ return 0;
+
+ devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
+ sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
+ mfunc = config_readl(socket, TI122X_MFUNC);
+
+ /*
+ * all serial/tied: only disable when modparm set. always doing it
+ * would mean a regression for working setups 'cos it disables the
+ * interrupts for both both slots on 2-slot controllers
+ * (and users of single slot controllers where it's save have to
+ * live with setting the modparm, most don't have to anyway)
+ */
+ if (((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) &&
+ (pwr_irqs_off || ti12xx_2nd_slot_empty(socket))) {
+ switch (socket->dev->device) {
+ case PCI_DEVICE_ID_TI_1250:
+ case PCI_DEVICE_ID_TI_1251A:
+ case PCI_DEVICE_ID_TI_1251B:
+ case PCI_DEVICE_ID_TI_1450:
+ case PCI_DEVICE_ID_TI_1451A:
+ case PCI_DEVICE_ID_TI_4450:
+ case PCI_DEVICE_ID_TI_4451:
+ /* these chips have no IRQSER setting in MFUNC3 */
+ break;
+
+ default:
+ if (operation == HOOK_POWER_PRE)
+ mfunc = (mfunc & ~TI122X_MFUNC3_MASK);
+ else
+ mfunc = (mfunc & ~TI122X_MFUNC3_MASK) | TI122X_MFUNC3_IRQSER;
+ }
+
+ return 0;
+ }
+
+ /* do the job differently for func0/1 */
+ if ((PCI_FUNC(socket->dev->devfn) == 0) ||
+ ((sysctl & TI122X_SCR_INTRTIE) &&
+ (pwr_irqs_off || ti12xx_2nd_slot_empty(socket)))) {
+ /* some bridges are different */
+ switch (socket->dev->device) {
+ case PCI_DEVICE_ID_TI_1250:
+ case PCI_DEVICE_ID_TI_1251A:
+ case PCI_DEVICE_ID_TI_1251B:
+ case PCI_DEVICE_ID_TI_1450:
+ /* those oldies use gpio3 for INTA */
+ gpio3 = config_readb(socket, TI1250_GPIO3_CONTROL);
+ if (operation == HOOK_POWER_PRE)
+ gpio3 = (gpio3 & ~TI1250_GPIO_MODE_MASK) | 0x40;
+ else
+ gpio3 &= ~TI1250_GPIO_MODE_MASK;
+ config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3);
+ break;
+
+ default:
+ /* all new bridges are the same */
+ if (operation == HOOK_POWER_PRE)
+ mfunc &= ~TI122X_MFUNC0_MASK;
+ else
+ mfunc |= TI122X_MFUNC0_INTA;
+ config_writel(socket, TI122X_MFUNC, mfunc);
+ }
+ } else {
+ switch (socket->dev->device) {
+ case PCI_DEVICE_ID_TI_1251A:
+ case PCI_DEVICE_ID_TI_1251B:
+ case PCI_DEVICE_ID_TI_1450:
+ /* those have INTA elsewhere and INTB in MFUNC0 */
+ if (operation == HOOK_POWER_PRE)
+ mfunc &= ~TI122X_MFUNC0_MASK;
+ else
+ mfunc |= TI125X_MFUNC0_INTB;
+ config_writel(socket, TI122X_MFUNC, mfunc);
+
+ break;
+
+ default:
+ /* all new bridges are the same */
+ if (operation == HOOK_POWER_PRE)
+ mfunc &= ~TI122X_MFUNC1_MASK;
+ else
+ mfunc |= TI122X_MFUNC1_INTB;
+ config_writel(socket, TI122X_MFUNC, mfunc);
+ }
+ }
+
+ return 0;
+}
+
static int ti12xx_override(struct yenta_socket *socket)
{
u32 val, val_orig;
else
ti12xx_irqroute_func1(socket);
+ /* install power hook */
+ socket->socket.power_hook = ti12xx_power_hook;
+
return ti_override(socket);
}
module_param(disable_clkrun, bool, 0444);
MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please try this option");
+static int isa_probe = 1;
+module_param(isa_probe, bool, 0444);
+MODULE_PARM_DESC(isa_probe, "If set ISA interrupts are probed (default). Set to N to disable probing");
+
+static int pwr_irqs_off;
+module_param(pwr_irqs_off, bool, 0644);
+MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!");
+
#if 0
#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
#else
val = (state & CB_3VCARD) ? SS_3VCARD : 0;
val |= (state & CB_XVCARD) ? SS_XVCARD : 0;
- val |= (state & (CB_CDETECT1 | CB_CDETECT2 | CB_5VCARD | CB_3VCARD
- | CB_XVCARD | CB_YVCARD)) ? 0 : SS_PENDING;
+ val |= (state & (CB_5VCARD | CB_3VCARD | CB_XVCARD | CB_YVCARD)) ? 0 : SS_PENDING;
+ val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? SS_PENDING : 0;
+
if (state & CB_CBCARD) {
val |= SS_CARDBUS;
val |= (state & CB_CARDSTS) ? SS_STSCHG : 0;
val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT;
val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0;
- } else {
+ } else if (state & CB_16BITCARD) {
u8 status = exca_readb(socket, I365_STATUS);
val |= ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0;
if (exca_readb(socket, I365_INTCTL) & I365_PC_IOCARD) {
}
-static unsigned int yenta_events(struct yenta_socket *socket)
+
+static irqreturn_t yenta_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
+ unsigned int events;
+ struct yenta_socket *socket = (struct yenta_socket *) dev_id;
u8 csc;
u32 cb_event;
- unsigned int events;
/* Clear interrupt status for the event */
cb_event = cb_readl(socket, CB_SOCKET_EVENT);
events |= (csc & I365_CSC_BVD2) ? SS_BATWARN : 0;
events |= (csc & I365_CSC_READY) ? SS_READY : 0;
}
- return events;
-}
-
-
-static irqreturn_t yenta_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- unsigned int events;
- struct yenta_socket *socket = (struct yenta_socket *) dev_id;
- events = yenta_events(socket);
- if (events) {
+ if (events)
pcmcia_parse_events(&socket->socket, events);
+
+ if (cb_event || csc)
return IRQ_HANDLED;
- }
+
return IRQ_NONE;
}
}
}
+/* redoes voltage interrogation if required */
+static void yenta_interrogate(struct yenta_socket *socket)
+{
+ u32 state;
+
+ state = cb_readl(socket, CB_SOCKET_STATE);
+ if (!(state & (CB_5VCARD | CB_3VCARD | CB_XVCARD | CB_YVCARD)) ||
+ (state & (CB_CDETECT1 | CB_CDETECT2 | CB_NOTACARD | CB_BADVCCREQ)) ||
+ ((state & (CB_16BITCARD | CB_CBCARD)) == (CB_16BITCARD | CB_CBCARD)))
+ cb_writel(socket, CB_SOCKET_FORCE, CB_CVSTEST);
+}
+
/* Called at resume and initialization events */
static int yenta_sock_init(struct pcmcia_socket *sock)
{
struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
- u32 state;
u16 bridge;
bridge = config_readw(socket, CB_BRIDGE_CONTROL) & ~CB_BRIDGE_INTR;
exca_writeb(socket, I365_GENCTL, 0x00);
/* Redo card voltage interrogation */
- state = cb_readl(socket, CB_SOCKET_STATE);
- if (!(state & (CB_CDETECT1 | CB_CDETECT2 | CB_5VCARD |
- CB_3VCARD | CB_XVCARD | CB_YVCARD)))
- cb_writel(socket, CB_SOCKET_FORCE, CB_CVSTEST);
+ yenta_interrogate(socket);
yenta_clear_maps(socket);
socket->socket.features |= SS_CAP_PAGE_REGS | SS_CAP_PCCARD | SS_CAP_CARDBUS;
socket->socket.map_size = 0x1000;
socket->socket.pci_irq = socket->cb_irq;
- socket->socket.irq_mask = yenta_probe_irq(socket, isa_irq_mask);
+ if (isa_probe)
+ socket->socket.irq_mask = yenta_probe_irq(socket, isa_irq_mask);
+ else
+ socket->socket.irq_mask = 0;
socket->socket.cb_dev = socket->dev;
printk(KERN_INFO "Yenta: ISA IRQ mask 0x%04x, PCI irq %d\n",
}
/* Figure out what the dang thing can do for the PCMCIA layer... */
+ yenta_interrogate(socket);
yenta_get_socket_capabilities(socket, isa_interrupts);
printk(KERN_INFO "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff