arm64: dts: imx8mn: Correct WDOG_B pin configuration

Different revision of i.MX8MN EVK boards may have different external
pull up registor design, some are enabled while some are NOT, to make
sure the WDOG_B pin works properly, better to enable internal pull up
resistor. Since enabling internal pull up resistor is NOT harmful and
having benefit of flexibility on different board design, just enable
it for all i.MX8MN boards; And schmitt input is NOT necessary for this
WDOG_B output pin, so remove it; Open drain outputs provide more
flexibility to a designer as they can be pulled-up to any voltage found
in the system, so enable it as well.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 4aa0dbd578dfda021e260af237e8ccd1dd8ee6a7..fda890589a09cec6d52946f6693feecbdb380481 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -340,7 +340,7 @@
 
        pinctrl_wdog: wdoggrp {
                fsl,pins = <
-                       MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B            0xc6
+                       MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B            0x166
                >;
        };
 };

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index a2d0190921e4939f0cd68aabe683cfe3484c7d7b..dde01daab62e4c892d33bed44933fbb63ffb5bc2 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -545,7 +545,7 @@
 
        pinctrl_wdog: wdoggrp {
                fsl,pins = <
-                       MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B    0xc6
+                       MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B    0x166
                >;
        };
 };