ARM: dts: bcm28155-ap: use node labels

Use node labels instead of nodename@address for BCM28155 AP board
to simplify its DTS file.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/20230718165319.GA5179@standask-GA-A55M-S2HP
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>

diff --git a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
index 0a8ad1d..2f36345 100644 (file)
--- a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
@@ -15,64 +15,64 @@
                device_type = "memory";
                reg = <0x80000000 0x40000000>; /* 1 GB */
        };
+};
 
-       serial@3e000000 {
-               status = "okay";
-       };
-
-       i2c@3e016000 {
-               clock-frequency = <400000>;
-               status = "okay";
-       };
+&bsc1 {
+       clock-frequency = <400000>;
+       status = "okay";
+};
 
-       i2c@3e017000 {
-               clock-frequency = <400000>;
-               status = "okay";
-       };
+&bsc2 {
+       clock-frequency = <400000>;
+       status = "okay";
+};
 
-       i2c@3e018000 {
-               clock-frequency = <400000>;
-               status = "okay";
-       };
+&bsc3 {
+       clock-frequency = <400000>;
+       status = "okay";
+};
 
-       i2c@3500d000 {
-               clock-frequency = <100000>;
-               status = "okay";
+&pmu_bsc {
+       clock-frequency = <100000>;
+       status = "okay";
 
-               pmu: pmu@8 {
-                       reg = <0x08>;
-               };
+       pmu: pmu@8 {
+               reg = <0x08>;
        };
+};
 
-       sdio2: mmc@3f190000 {
-               non-removable;
-               max-frequency = <48000000>;
-               vmmc-supply = <&camldo1_reg>;
-               vqmmc-supply = <&iosr1_reg>;
-               status = "okay";
-       };
+&pwm {
+       status = "okay";
+};
 
-       sdio4: mmc@3f1b0000 {
-               max-frequency = <48000000>;
-               cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-               vmmc-supply = <&sdldo_reg>;
-               vqmmc-supply = <&sdxldo_reg>;
-               status = "okay";
-       };
+&sdio2 {
+       non-removable;
+       max-frequency = <48000000>;
+       vmmc-supply = <&camldo1_reg>;
+       vqmmc-supply = <&iosr1_reg>;
+       status = "okay";
+};
 
-       pwm: pwm@3e01a000 {
-               status = "okay";
-       };
+&sdio4 {
+       max-frequency = <48000000>;
+       cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+       vmmc-supply = <&sdldo_reg>;
+       vqmmc-supply = <&sdxldo_reg>;
+       status = "okay";
+};
 
-       usbotg: usb@3f120000 {
-               vusb_d-supply = <&usbldo_reg>;
-               vusb_a-supply = <&iosr1_reg>;
-               status = "okay";
-       };
+&uartb {
+       status = "okay";
+};
 
-       usbphy: usb-phy@3f130000 {
-               status = "okay";
-       };
+&usbotg {
+       vusb_d-supply = <&usbldo_reg>;
+       vusb_a-supply = <&iosr1_reg>;
+       status = "okay";
+};
+
+&usbphy {
+       status = "okay";
 };
 
 #include "bcm59056.dtsi"