configs: tizen_starfive_visionfive2: Upate defconfig file

Update defconfig file according to upating version.

Change-Id: I03bc380a61147aca8043b1dbe2f1931952899a41
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

diff --git a/configs/tizen_starfive_visionfive2_defconfig b/configs/tizen_starfive_visionfive2_defconfig
index d106f4c4c83ffcdbf4221ace8eafc9f2038bfab5..f4ff9eb4b059864b58edc3ee8182b7855a14276d 100644 (file)
--- a/configs/tizen_starfive_visionfive2_defconfig
+++ b/configs/tizen_starfive_visionfive2_defconfig
@@ -14,8 +14,9 @@ CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_STACK=0x8180000
+CONFIG_SPL_BSS_START_ADDR=0x8040000
+CONFIG_SPL_BSS_MAX_SIZE=0x10000
 CONFIG_SPL=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_SYS_LOAD_ADDR=0x82000000
@@ -26,29 +27,30 @@ CONFIG_CMODEL_MEDANY=y
 CONFIG_RISCV_SMODE=y
 # CONFIG_OF_BOARD_FIXUP is not set
 CONFIG_FIT=y
-CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_QSPI_BOOT=y
 CONFIG_SD_BOOT=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 debug rootwait earlycon=sbi"
 CONFIG_BOOTCOMMAND="part number ${devtype} ${devnum} ${bootname} bootpart; load ${devtype} ${devnum}:${bootpart} ${scriptaddr} ${prefix}${script}; distro_bootpart=${bootpart}; source ${scriptaddr}"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr}; fdt addr ${fdtcontroladdr}; test -n \"${loadbootenv}\" -a -n \"${importbootenv}\" && run loadbootenv && run importbootenv;"
 CONFIG_DEFAULT_FDT_FILE="jh7110-starfive-visionfive-2.dtb"
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
 CONFIG_ID_EEPROM=y
 CONFIG_SYS_EEPROM_BUS_NUM=5
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x0
-CONFIG_SPL_BSS_START_ADDR=0x8040000
-CONFIG_SPL_BSS_MAX_SIZE=0x10000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80000000
-CONFIG_SYS_SPL_MALLOC_SIZE=0x400000
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80000000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x400000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2
 CONFIG_SPL_I2C=y
@@ -56,10 +58,7 @@ CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_PROMPT="VisionFive2> "
-CONFIG_SYS_CBSIZE=256
-CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_SBI=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_SIZE=512
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4
@@ -111,5 +110,4 @@ CONFIG_SYS_NS16550=y
 CONFIG_CADENCE_QSPI=y
 CONFIG_SYSRESET=y
 CONFIG_TIMER_EARLY=y
-CONFIG_OF_LIBFDT_ASSUME_MASK=0x0
 # CONFIG_EFI_LOADER is not set