ARM: dts: nspire: use lower case hex addresses in node unit addresses

Convert all hex addresses in node unit addresses to lower case to fix
dt_binding_check and dtc W=1 warnings.

Conversion was done using sed:

  $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm/boot/dts/nspire*
  $ sed -e 's/<0x\([a-zA-Z0-9_-]*\) /<0x\L\1 /g' -i arch/arm/boot/dts/nspire*

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220317115542.450032-2-krzysztof.kozlowski@canonical.com

diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi
index 41744cc..01e1bb7 100644 (file)
--- a/arch/arm/boot/dts/nspire-classic.dtsi
+++ b/arch/arm/boot/dts/nspire-classic.dtsi
@@ -17,7 +17,7 @@
 
 &fast_timer {
        /* compatible = "lsi,zevio-timer"; */
-       reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
+       reg = <0x90010000 0x1000>, <0x900a0010 0x8>;
 };
 
 &uart {
@@ -30,12 +30,12 @@
 
 &timer0 {
        /* compatible = "lsi,zevio-timer"; */
-       reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
+       reg = <0x900c0000 0x1000>, <0x900a0018 0x8>;
 };
 
 &timer1 {
        compatible = "lsi,zevio-timer";
-       reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+       reg = <0x900d0000 0x1000>, <0x900a0020 0x8>;
 };
 
 &keypad {
@@ -66,10 +66,10 @@
                #address-cells = <1>;
                #size-cells = <1>;
 
-               intc: interrupt-controller@DC000000 {
+               intc: interrupt-controller@dc000000 {
                        compatible = "lsi,zevio-intc";
                        interrupt-controller;
-                       reg = <0xDC000000 0x1000>;
+                       reg = <0xdc000000 0x1000>;
                        #interrupt-cells = <1>;
                };
        };

diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
index 0c16b04..590b7df 100644 (file)
--- a/arch/arm/boot/dts/nspire-cx.dts
+++ b/arch/arm/boot/dts/nspire-cx.dts
@@ -92,10 +92,10 @@
                #address-cells = <1>;
                #size-cells = <1>;
 
-               intc: interrupt-controller@DC000000 {
+               intc: interrupt-controller@dc000000 {
                        compatible = "arm,pl190-vic";
                        interrupt-controller;
-                       reg = <0xDC000000 0x1000>;
+                       reg = <0xdc000000 0x1000>;
                        #interrupt-cells = <1>;
                };
 

diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
index 90e033d..bb240e6 100644 (file)
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -20,9 +20,9 @@
                reg = <0x00000000 0x80000>;
        };
 
-       sram: sram@A4000000 {
+       sram: sram@a4000000 {
                device = "memory";
-               reg = <0xA4000000 0x20000>;
+               reg = <0xa4000000 0x20000>;
        };
 
        timer_clk: timer_clk {
@@ -33,12 +33,12 @@
 
        base_clk: base_clk {
                #clock-cells = <0>;
-               reg = <0x900B0024 0x4>;
+               reg = <0x900b0024 0x4>;
        };
 
        ahb_clk: ahb_clk {
                #clock-cells = <0>;
-               reg = <0x900B0024 0x4>;
+               reg = <0x900b0024 0x4>;
                clocks = <&base_clk>;
        };
 
@@ -71,28 +71,28 @@
                #size-cells = <1>;
                ranges;
 
-               spi: spi@A9000000 {
-                       reg = <0xA9000000 0x1000>;
+               spi: spi@a9000000 {
+                       reg = <0xa9000000 0x1000>;
                };
 
-               usb0: usb@B0000000 {
+               usb0: usb@b0000000 {
                        compatible = "lsi,zevio-usb";
-                       reg = <0xB0000000 0x1000>;
+                       reg = <0xb0000000 0x1000>;
                        interrupts = <8>;
 
                        usb-phy = <&usb_phy>;
                        vbus-supply = <&vbus_reg>;
                };
 
-               usb1: usb@B4000000 {
-                       reg = <0xB4000000 0x1000>;
+               usb1: usb@b4000000 {
+                       reg = <0xb4000000 0x1000>;
                        interrupts = <9>;
                        status = "disabled";
                };
 
-               lcd: lcd@C0000000 {
+               lcd: lcd@c0000000 {
                        compatible = "arm,pl111", "arm,primecell";
-                       reg = <0xC0000000 0x1000>;
+                       reg = <0xc0000000 0x1000>;
                        interrupts = <21>;
 
                        /*
@@ -105,17 +105,17 @@
                        clock-names = "clcdclk", "apb_pclk";
                };
 
-               adc: adc@C4000000 {
-                       reg = <0xC4000000 0x1000>;
+               adc: adc@c4000000 {
+                       reg = <0xc4000000 0x1000>;
                        interrupts = <11>;
                };
 
-               tdes: crypto@C8010000 {
-                       reg = <0xC8010000 0x1000>;
+               tdes: crypto@c8010000 {
+                       reg = <0xc8010000 0x1000>;
                };
 
-               sha256: crypto@CC000000 {
-                       reg = <0xCC000000 0x1000>;
+               sha256: crypto@cc000000 {
+                       reg = <0xcc000000 0x1000>;
                };
 
                apb@90000000 {
@@ -143,16 +143,16 @@
                                interrupts = <1>;
                        };
 
-                       timer0: timer@900C0000 {
-                               reg = <0x900C0000 0x1000>;
+                       timer0: timer@900c0000 {
+                               reg = <0x900c0000 0x1000>;
                                clocks = <&timer_clk>, <&timer_clk>,
                                         <&timer_clk>;
                                clock-names = "timer0clk", "timer1clk",
                                              "apb_pclk";
                        };
 
-                       timer1: timer@900D0000 {
-                               reg = <0x900D0000 0x1000>;
+                       timer1: timer@900d0000 {
+                               reg = <0x900d0000 0x1000>;
                                interrupts = <19>;
                                clocks = <&timer_clk>, <&timer_clk>,
                                         <&timer_clk>;
@@ -171,18 +171,18 @@
                                interrupts = <4>;
                        };
 
-                       misc: misc@900A0000 {
-                               reg = <0x900A0000 0x1000>;
+                       misc: misc@900a0000 {
+                               reg = <0x900a0000 0x1000>;
                        };
 
-                       pwr: pwr@900B0000 {
-                               reg = <0x900B0000 0x1000>;
+                       pwr: pwr@900b0000 {
+                               reg = <0x900b0000 0x1000>;
                                interrupts = <15>;
                        };
 
-                       keypad: input@900E0000 {
+                       keypad: input@900e0000 {
                                compatible = "ti,nspire-keypad";
-                               reg = <0x900E0000 0x1000>;
+                               reg = <0x900e0000 0x1000>;
                                interrupts = <16>;
 
                                scan-interval = <1000>;
@@ -191,8 +191,8 @@
                                clocks = <&apb_pclk>;
                        };
 
-                       contrast: contrast@900F0000 {
-                               reg = <0x900F0000 0x1000>;
+                       contrast: contrast@900f0000 {
+                               reg = <0x900f0000 0x1000>;
                        };
 
                        led: led@90110000 {