} from, to;
};
-/**
- * The Free function to Resizing Effect context data.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- *
- * This function belongs to the Risizing effect, which consists of functions:
- * - elm_transit_effect_resizing_context_new()
- * - elm_transit_effect_resizing_op()
- * - elm_transit_effect_resizing_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Resizing context data.
- * @param transit Transit object.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_resizing_context_free(void *data, Elm_Transit *transit __UNUSED__)
+void
+_transit_effect_resizing_context_free(void *data, Elm_Transit *transit __UNUSED__)
{
free(data);
}
-/**
- * Operation function to the Resizing Effect.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- * @note This effect will be applied to the objects that are in the transit,
- * If you change the set of objects in the transit with elm_transit_object_add()
- * or elm_transit_object_remove(), the set of objects affected by this effect
- * will be changed too.
- *
- * This function belongs to the Risizing effect, which consists of functions:
- * - elm_transit_effect_resizing_context_new()
- * - elm_transit_effect_resizing_op()
- * - elm_transit_effect_resizing_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Resizing context data.
- * @param transit Transit object.
- * @param progress The time progression, it is a double value between 0.0 and 1.0.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_resizing_op(void *data, Elm_Transit *transit, double progress)
+void
+_transit_effect_resizing_op(void *data, Elm_Transit *transit, double progress)
{
EINA_SAFETY_ON_NULL_RETURN(data);
evas_object_resize(obj, w, h);
}
+void *
+_transit_effect_resizing_context_new(Evas_Coord from_w, Evas_Coord from_h, Evas_Coord to_w, Evas_Coord to_h)
+{
+ Elm_Fx_Resizing *resizing;
+
+ resizing = ELM_NEW(Elm_Fx_Resizing);
+ if (!resizing) return NULL;
+
+ resizing->from.w = from_w;
+ resizing->from.h = from_h;
+ resizing->to.w = to_w - from_w;
+ resizing->to.h = to_h - from_h;
+
+ return resizing;
+}
+
/**
- * Get a new context data of Resizing Effect.
+ * Add the Resizing Effect to Elm_Transit.
*
- * This function belongs to the Risizing effect, which consists of functions:
- * - elm_transit_effect_resizing_context_new()
- * - elm_transit_effect_resizing_op()
- * - elm_transit_effect_resizing_context_free()
+ * @note This API is one of the facades. It creates resizing effect context
+ * and add it's required APIs to elm_transit_effect_add.
+ * @note This effect will be applied to the objects that are in the transit,
+ * @note If you change the set of objects in the transit with elm_transit_object_add()
+ * or elm_transit_object_remove(), the set of objects affected by this effect
+ * will be changed too.
*
* @see elm_transit_effect_add()
*
+ * @param transit Transit object.
* @param from_w Object width size when effect begins.
* @param from_h Object height size when effect begins.
* @param to_w Object width size when effect ends.
* @return Resizing effect context data.
*
* @ingroup Transit
- */
+*/
EAPI void *
-elm_transit_effect_resizing_context_new(Evas_Coord from_w, Evas_Coord from_h, Evas_Coord to_w, Evas_Coord to_h)
+elm_transit_effect_resizing_add(Elm_Transit *transit, Evas_Coord from_w, Evas_Coord from_h, Evas_Coord to_w, Evas_Coord to_h)
{
- Elm_Fx_Resizing *resizing;
-
- resizing = ELM_NEW(Elm_Fx_Resizing);
- if (!resizing) return NULL;
-
- resizing->from.w = from_w;
- resizing->from.h = from_h;
- resizing->to.w = to_w - from_w;
- resizing->to.h = to_h - from_h;
+ ELM_TRANSIT_CHECK_OR_RETURN(transit, NULL);
- return resizing;
+ void *effect_context = _transit_effect_resizing_context_new(from_w, from_h, to_w, to_h);
+ if(!effect_context) return NULL;
+ elm_transit_effect_add(transit,
+ _transit_effect_resizing_op, effect_context,
+ _transit_effect_resizing_context_free);
+ return effect_context;
}
///////////////////////////////////////////////////////////////////////////////
return data_list;
}
-/**
- * The Free function to Translation Effect context data.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- *
- * This function belongs to the Translation effect, which consists of functions:
- * - elm_transit_effect_translation_context_new()
- * - elm_transit_effect_translation_op()
- * - elm_transit_effect_translation_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Translation context data.
- * @param transit Transit object.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_translation_context_free(void *data, Elm_Transit *transit __UNUSED__)
+void
+_transit_effect_translation_context_free(void *data, Elm_Transit *transit __UNUSED__)
{
EINA_SAFETY_ON_NULL_RETURN(data);
free(translation);
}
-/**
- * Operation function to the Translation Effect.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- * @note When this function begins to be called, it gets the current objects in
- * the transit, that is, elm_transit_object_remove() and elm_transit_object_add()
- * will not cause any changes in the set of objects that this effect is being
- * applied if these functions are called after the @p transit starts to run.
- *
- * This function belongs to the Translation effect, which consists of functions:
- * - elm_transit_effect_translation_context_new()
- * - elm_transit_effect_translation_op()
- * - elm_transit_effect_translation_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Translation context data.
- * @param transit Transit object.
- * @param progress The time progression, it is a double value between 0.0 and 1.0.
- *
- * @ingroup Transit
- * @warning Is higher recommended just create a transit with this effect when
- * the window that the objects of the transit belongs has already been created.
- * This is because this effect needs the geometry information about the objects,
- * and if the window was not created yet, it can get a wrong information.
- */
-EAPI void
-elm_transit_effect_translation_op(void *data, Elm_Transit *transit, double progress __UNUSED__)
+void
+_transit_effect_translation_op(void *data, Elm_Transit *transit, double progress __UNUSED__)
{
EINA_SAFETY_ON_NULL_RETURN(data);
}
}
+void *
+_transit_effect_translation_context_new(Evas_Coord from_dx, Evas_Coord from_dy, Evas_Coord to_dx, Evas_Coord to_dy)
+{
+ Elm_Fx_Translation *translation;
+
+ translation = ELM_NEW(Elm_Fx_Translation);
+
+ if (!translation) return NULL;
+
+ translation->from.dx = from_dx;
+ translation->from.dy = from_dy;
+ translation->to.dx = to_dx - from_dx;
+ translation->to.dy = to_dy - from_dy;
+
+ return translation;
+}
+
/**
- * Get a new context data of Translation Effect
+ * Add the Translation Effect to Elm_Transit.
*
- * This function belongs to the Translation effect, which consists of functions:
- * - elm_transit_effect_translation_context_new()
- * - elm_transit_effect_translation_op()
- * - elm_transit_effect_translation_context_free()
+ * @note This API is one of the facades. It creates translation effect context
+ * and add it's required APIs to elm_transit_effect_add.
+ * @note When this function is called, it gets the current objects in
+ * the transit, that is, elm_transit_object_remove() and elm_transit_object_add()
+ * will not cause any changes in the set of objects that this effect is being
+ * applied.
*
* @see elm_transit_effect_add()
*
+ * @param transit Transit object.
* @param from_dx X Position variation when effect begins.
* @param from_dy Y Position variation when effect begins.
* @param to_dx X Position variation when effect ends.
* @return Translation effect context data.
*
* @ingroup Transit
+ * @warning Is higher recommended just create a transit with this effect when
+ * the window that the objects of the transit belongs has already been created.
+ * This is because this effect needs the geometry information about the objects,
+ * and if the window was not created yet, it can get a wrong information.
+ * @warning Is not recommended remove or add an object after the transit begins
+ * to run, because the order of the objects will be affected.
*/
EAPI void *
-elm_transit_effect_translation_context_new(Evas_Coord from_dx, Evas_Coord from_dy, Evas_Coord to_dx, Evas_Coord to_dy)
+elm_transit_effect_translation_add(Elm_Transit *transit, Evas_Coord from_dx, Evas_Coord from_dy, Evas_Coord to_dx, Evas_Coord to_dy)
{
- Elm_Fx_Translation *translation;
-
- translation = ELM_NEW(Elm_Fx_Translation);
-
- if (!translation) return NULL;
-
- translation->from.dx = from_dx;
- translation->from.dy = from_dy;
- translation->to.dx = to_dx - from_dx;
- translation->to.dy = to_dy - from_dy;
+ ELM_TRANSIT_CHECK_OR_RETURN(transit, NULL);
- return translation;
+ void *effect_context = _transit_effect_translation_context_new(from_dx, from_dy, to_dx, to_dy);
+ if(!effect_context) return NULL;
+ elm_transit_effect_add(transit,
+ _transit_effect_translation_op, effect_context,
+ _transit_effect_translation_context_free);
+ return effect_context;
}
+
///////////////////////////////////////////////////////////////////////////////
//Zoom FX
///////////////////////////////////////////////////////////////////////////////
float from, to;
};
-/**
- * The Free function to Zoom Effect context data.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- *
- * This function belongs to the Zoom effect, which consists of functions:
- * - elm_transit_effect_zoom_context_new()
- * - elm_transit_effect_zoom_op()
- * - elm_transit_effect_zoom_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Zoom context data.
- * @param transit Transit object.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_zoom_context_free(void *data, Elm_Transit *transit __UNUSED__)
+void
+_transit_effect_zoom_context_free(void *data, Elm_Transit *transit __UNUSED__)
{
free(data);
}
-/**
- * Operation function to the Zoom Effect
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- * @note This effect will be applied to the objects that are in the transit,
- * If you change the set of objects in the transit with elm_transit_object_add()
- * or elm_transit_object_remove(), the set of objects affected by this effect
- * will be changed too.
- *
- * This function belongs to the Zoom effect, which consists of functions:
- * - elm_transit_effect_zoom_context_new()
- * - elm_transit_effect_zoom_op()
- * - elm_transit_effect_zoom_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Zoom context data.
- * @param transit Transit object.
- * @param progress The time progression, it is a double value between 0.0 and 1.0.
- *
- * @ingroup Transit
- * @warning Is higher recommended just create a transit with this effect when
- * the window that the objects of the transit belongs has already been created.
- * This is because this effect needs the geometry information about the objects,
- * and if the window was not created yet, it can get a wrong information.
- * @warning Is not recommended remove or add an object after the transit begins
- * to run, because the order of the objects will be affected.
- */
-EAPI void
-elm_transit_effect_zoom_op(void *data, Elm_Transit *transit , double progress)
+void
+_transit_effect_zoom_op(void *data, Elm_Transit *transit , double progress)
{
EINA_SAFETY_ON_NULL_RETURN(data);
evas_map_free(map);
}
+void *
+_transit_effect_zoom_context_new(float from_rate, float to_rate)
+{
+ Elm_Fx_Zoom *zoom;
+
+ zoom = ELM_NEW(Elm_Fx_Zoom);
+ if (!zoom) return NULL;
+
+ zoom->from = (FOCAL - (from_rate * FOCAL)) * (1 / from_rate);
+ zoom->to = ((FOCAL - (to_rate * FOCAL)) * (1 / to_rate)) - zoom->from;
+
+ return zoom;
+}
+
/**
- * Get a new context data of Zoom Effect
+ * Add the Zoom Effect to Elm_Transit.
*
- * @see elm_transit_effect_add()
+ * @note This API is one of the facades. It creates zoom effect context
+ * and add it's required APIs to elm_transit_effect_add.
+ * @note If you change the set of objects in the transit with elm_transit_object_add()
+ * or elm_transit_object_remove(), the set of objects affected by this effect
+ * will be changed too.
*
- * This function belongs to the Zoom effect, which consists of functions:
- * - elm_transit_effect_zoom_context_new()
- * - elm_transit_effect_zoom_op()
- * - elm_transit_effect_zoom_context_free()
+ * @see elm_transit_effect_add()
*
+ * @param transit Transit object.
* @param from_rate Scale rate when effect begins (1 is current rate).
* @param to_rate Scale rate when effect ends.
* @return Zoom effect context data.
*
* @ingroup Transit
+ * @warning Is higher recommended just create a transit with this effect when
+ * the window that the objects of the transit belongs has already been created.
+ * This is because this effect needs the geometry information about the objects,
+ * and if the window was not created yet, it can get a wrong information.
+ * @warning Is not recommended remove or add an object after the transit begins
+ * to run, because the order of the objects will be affected.
*/
EAPI void *
-elm_transit_effect_zoom_context_new(float from_rate, float to_rate)
+elm_transit_effect_zoom_add(Elm_Transit *transit, float from_rate, float to_rate)
{
- Elm_Fx_Zoom *zoom;
-
- zoom = ELM_NEW(Elm_Fx_Zoom);
- if (!zoom) return NULL;
-
- zoom->from = (FOCAL - (from_rate * FOCAL)) * (1 / from_rate);
- zoom->to = ((FOCAL - (to_rate * FOCAL)) * (1 / to_rate)) - zoom->from;
-
- return zoom;
+ ELM_TRANSIT_CHECK_OR_RETURN(transit, NULL);
+ void *effect_context = _transit_effect_zoom_context_new(from_rate, to_rate);
+ if(!effect_context) return NULL;
+ elm_transit_effect_add(transit,
+ _transit_effect_zoom_op, effect_context,
+ _transit_effect_zoom_context_free);
+ return effect_context;
}
+
///////////////////////////////////////////////////////////////////////////////
//Flip FX
///////////////////////////////////////////////////////////////////////////////
Eina_Bool cw:1;
};
-/**
- * The Free function to Flip Effect context data.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- *
- * This function belongs to the Flip effect, which consists of functions:
- * - elm_transit_effect_flip_context_new()
- * - elm_transit_effect_flip_op()
- * - elm_transit_effect_flip_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Flip context data.
- * @param transit Transit object.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_flip_context_free(void *data, Elm_Transit *transit)
+void
+_transit_effect_flip_context_free(void *data, Elm_Transit *transit)
{
EINA_SAFETY_ON_NULL_RETURN(data);
free(data);
}
-/**
- * Operation function to the Flip Effect.
- *
- * This effect is applied to each pair of objects in the order they are listed
- * in the transit list of objects. The first object in the pair will be the
- * "front" object and the second will be the "back" object.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- * @note This effect will be applied to the objects that are in the transit,
- * If you change the set of objects in the transit with elm_transit_object_add()
- * or elm_transit_object_remove(), the set of objects affected by this effect
- * will be changed too.
- *
- * This function belongs to the Flip effect, which consists of functions:
- * - elm_transit_effect_flip_context_new()
- * - elm_transit_effect_flip_op()
- * - elm_transit_effect_flip_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Flip context data.
- * @param transit Transit object.
- * @param progress The time progression, it is a double value between 0.0 and 1.0.
- *
- * @ingroup Transit
- * @warning Is higher recommended just create a transit with this effect when
- * the window that the objects of the transit belongs has already been created.
- * This is because this effect needs the geometry information about the objects,
- * and if the window was not created yet, it can get a wrong information.
- * @warning Is not recommended remove or add an object after the transit begins
- * to run, because the order of the objects will be affected.
- */
-EAPI void
-elm_transit_effect_flip_op(void *data, Elm_Transit *transit, double progress)
+void
+_transit_effect_flip_op(void *data, Elm_Transit *transit, double progress)
{
EINA_SAFETY_ON_NULL_RETURN(data);
evas_map_free(map);
}
+void *
+_transit_effect_flip_context_new(Elm_Fx_Flip_Axis axis, Eina_Bool cw)
+{
+ Elm_Fx_Flip *flip;
+
+ flip = ELM_NEW(Elm_Fx_Flip);
+ if (!flip) return NULL;
+
+ flip->cw = cw;
+ flip->axis = axis;
+
+ return flip;
+}
+
/**
- * Get a new context data of Flip Effect
- *
- * This function belongs to the Flip effect, which consists of functions:
- * - elm_transit_effect_flip_context_new()
- * - elm_transit_effect_flip_op()
- * - elm_transit_effect_flip_context_free()
+ * Add the Flip Effect to Elm_Transit.
*
+ * @note This API is one of the facades. It creates flip effect context
+ * and add it's required APIs to elm_transit_effect_add.
+ * @note This effect is applied to each pair of objects in the order they are listed
+ * in the transit list of objects. The first object in the pair will be the
+ * "front" object and the second will be the "back" object.
+ * @note If you change the set of objects in the transit with elm_transit_object_add()
+ * or elm_transit_object_remove(), the set of objects affected by this effect
+ * will be changed too.
+ *
* @see elm_transit_effect_add()
*
+ * @param transit Transit object.
* @param axis Flipping Axis(X or Y).
* @param cw Flipping Direction. EINA_TRUE is clock-wise.
* @return Flip effect context data.
*
* @ingroup Transit
+ * @warning Is higher recommended just create a transit with this effect when
+ * the window that the objects of the transit belongs has already been created.
+ * This is because this effect needs the geometry information about the objects,
+ * and if the window was not created yet, it can get a wrong information.
+ * @warning Is not recommended remove or add an object after the transit begins
+ * to run, because the order of the objects will be affected.
*/
EAPI void *
-elm_transit_effect_flip_context_new(Elm_Fx_Flip_Axis axis, Eina_Bool cw)
+elm_transit_effect_flip_add(Elm_Transit *transit, Elm_Fx_Flip_Axis axis, Eina_Bool cw)
{
- Elm_Fx_Flip *flip;
-
- flip = ELM_NEW(Elm_Fx_Flip);
- if (!flip) return NULL;
-
- flip->cw = cw;
- flip->axis = axis;
+ ELM_TRANSIT_CHECK_OR_RETURN(transit, NULL);
- return flip;
+ void *effect_context = _transit_effect_flip_context_new(axis, cw);
+ if(!effect_context) return NULL;
+ elm_transit_effect_add(transit,
+ _transit_effect_flip_op, effect_context,
+ _transit_effect_flip_context_free);
+ return effect_context;
}
///////////////////////////////////////////////////////////////////////////////
}
}
-/**
- * The Free function to Resizable Flip Effect context data.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- *
- * This function belongs to the Resizable Flip effect, which consists of
- * functions:
- * - elm_transit_effect_resizable_flip_context_new()
- * - elm_transit_effect_resizable_flip_op()
- * - elm_transit_effect_resizing_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Resizable Flip context data.
- * @param transit Transit object.
- *
- * @ingroup Transit
- * @warning Is higher recommended just create a transit with this effect when
- * the window that the objects of the transit belongs has already been created.
- * This is because this effect needs the geometry information about the objects,
- * and if the window was not created yet, it can get a wrong information.
- * @warning Is not recommended remove or add an object after the transit begins
- * to run, because the order of the objects will be affected.
- */
-EAPI void
-elm_transit_effect_resizable_flip_context_free(void *data, Elm_Transit *transit __UNUSED__)
+void
+_transit_effect_resizable_flip_context_free(void *data, Elm_Transit *transit __UNUSED__)
{
EINA_SAFETY_ON_NULL_RETURN(data);
free(resizable_flip);
}
-/**
- * Operation function to the Resizable Flip Effect
- *
- * This effect is applied to each pair of objects in the order they are listed
- * in the transit list of objects. The first object in the pair will be the
- * "front" object and the second will be the "back" object.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- * @note When this function begins to be called, it gets the current objects in
- * the transit, that is, elm_transit_object_remove() and elm_transit_object_add()
- * will not cause any changes in the set of objects that this effect is being
- * applied if these functions are called after the @p transit starts to run.
- *
- * This function belongs to the Resizable Flip effect, which consists of
- * functions:
- * - elm_transit_effect_resizable_flip_context_new()
- * - elm_transit_effect_resizable_flip_op()
- * - elm_transit_effect_resizing_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Resizable Flip context data.
- * @param transit Transit object.
- * @param progress The time progression, it is a double value between 0.0 and 1.0.
- *
- * @ingroup Transit
- * @warning Is higher recommended just create a transit with this effect when
- * the window that the objects of the transit belongs has already been created.
- * This is because this effect needs the geometry information about the objects,
- * and if the window was not created yet, it can get a wrong information.
- */
-EAPI void
-elm_transit_effect_resizable_flip_op(void *data, Elm_Transit *transit __UNUSED__, double progress)
+void
+_transit_effect_resizable_flip_op(void *data, Elm_Transit *transit __UNUSED__, double progress)
{
EINA_SAFETY_ON_NULL_RETURN(data);
evas_map_free(map);
}
+void *
+_transit_effect_resizable_flip_context_new(Elm_Fx_Flip_Axis axis, Eina_Bool cw)
+{
+ Elm_Fx_ResizableFlip *resizable_flip;
+
+ resizable_flip = ELM_NEW(Elm_Fx_ResizableFlip);
+ if (!resizable_flip) return NULL;
+
+ resizable_flip->cw = cw;
+ resizable_flip->axis = axis;
+
+ return resizable_flip;
+}
+
/**
- * Get a new context data of Resizable Flip Effect.
- *
- * This function belongs to the Resizable Flip effect, which consists of
- * functions:
- * - elm_transit_effect_resizable_flip_context_new()
- * - elm_transit_effect_resizable_flip_op()
- * - elm_transit_effect_resizing_context_free()
+ * Add the Resizable Flip Effect to Elm_Transit.
*
+ * @note This API is one of the facades. It creates resizable flip effect context
+ * and add it's required APIs to elm_transit_effect_add.
+ * @note This effect is applied to each pair of objects in the order they are listed
+ * in the transit list of objects. The first object in the pair will be the
+ * "front" object and the second will be the "back" object.
+ * @note When this function is called, it gets the current objects in
+ * the transit, that is, elm_transit_object_remove() and elm_transit_object_add()
+ * will not cause any changes in the set of objects that this effect is being
+ * applied.
+ *
* @see elm_transit_effect_add()
*
- * @param axis Flipping Axis.(X or Y).
+ * @param transit Transit object.
+ * @param axis Flipping Axis(X or Y).
* @param cw Flipping Direction. EINA_TRUE is clock-wise.
- * @return Resizable Flip effect context data.
+ * @return Resizable flip effect context data.
*
* @ingroup Transit
+ * @warning Is higher recommended just create a transit with this effect when
+ * the window that the objects of the transit belongs has already been created.
+ * This is because this effect needs the geometry information about the objects,
+ * and if the window was not created yet, it can get a wrong information.
+ * @warning Is not recommended remove or add an object after the transit begins
+ * to run, because the order of the objects will be affected.
*/
EAPI void *
-elm_transit_effect_resizable_flip_context_new(Elm_Fx_Flip_Axis axis, Eina_Bool cw)
+elm_transit_effect_resizable_flip_add(Elm_Transit *transit, Elm_Fx_Flip_Axis axis, Eina_Bool cw)
{
- Elm_Fx_ResizableFlip *resizable_flip;
-
- resizable_flip = ELM_NEW(Elm_Fx_ResizableFlip);
- if (!resizable_flip) return NULL;
-
- resizable_flip->cw = cw;
- resizable_flip->axis = axis;
+ ELM_TRANSIT_CHECK_OR_RETURN(transit, NULL);
- return resizable_flip;
+ void *effect_context = _transit_effect_resizable_flip_context_new(axis, cw);
+ if(!effect_context) return NULL;
+ elm_transit_effect_add(transit,
+ _transit_effect_resizable_flip_op, effect_context,
+ _transit_effect_resizable_flip_context_free);
+ return effect_context;
}
+
///////////////////////////////////////////////////////////////////////////////
//Wipe FX
///////////////////////////////////////////////////////////////////////////////
evas_map_util_3d_perspective(map, x + (w / 2), y + (h / 2), 0, FOCAL);
}
-/**
- * The Free function to Wipe Effect context data.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- * @note This effect will be applied to the objects that are in the transit,
- * If you change the set of objects in the transit with elm_transit_object_add()
- * or elm_transit_object_remove(), the set of objects affected by this effect
- * will be changed too.
- *
- * This function belongs to the Wipe effect, which consists of
- * functions:
- * - elm_transit_effect_wipe_context_new()
- * - elm_transit_effect_wipe_op()
- * - elm_transit_effect_wipe_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Wipe context data.
- * @param transit Transit object.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_wipe_context_free(void *data, Elm_Transit *transit)
+void
+_transit_effect_wipe_context_free(void *data, Elm_Transit *transit)
{
EINA_SAFETY_ON_NULL_RETURN(data);
free(wipe);
}
-/**
- * Operation function to the Wipe Effect.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- *
- * This function belongs to the Wipe effect, which consists of
- * functions:
- * - elm_transit_effect_wipe_context_new()
- * - elm_transit_effect_wipe_op()
- * - elm_transit_effect_wipe_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Wipe context data.
- * @param transit Transit object.
- * @param progress The time progression, it is a double value between 0.0 and 1.0.
- *
- * @ingroup Transit
- * @warning Is higher recommended just create a transit with this effect when
- * the window that the objects of the transit belongs has already been created.
- * This is because this effect needs the geometry information about the objects,
- * and if the window was not created yet, it can get a wrong information.
- * @warning Is not recommended remove or add an object after the transit begins
- * to run, because the order of the objects will be affected.
- */
-EAPI void
-elm_transit_effect_wipe_op(void *data, Elm_Transit *transit, double progress)
+void
+_transit_effect_wipe_op(void *data, Elm_Transit *transit, double progress)
{
EINA_SAFETY_ON_NULL_RETURN(data);
evas_map_free(map);
}
+void *
+_transit_effect_wipe_context_new(Elm_Fx_Wipe_Type type, Elm_Fx_Wipe_Dir dir)
+{
+ Elm_Fx_Wipe *wipe;
+
+ wipe = ELM_NEW(Elm_Fx_Wipe);
+ if (!wipe) return NULL;
+
+ wipe->type = type;
+ wipe->dir = dir;
+
+ return wipe;
+}
+
/**
- * Get a new context data of Wipe Flip Effect.
- *
- * This function belongs to the Wipe effect, which consists of
- * functions:
- * - elm_transit_effect_wipe_context_new()
- * - elm_transit_effect_wipe_op()
- * - elm_transit_effect_wipe_context_free()
+ * Add the Wipe Effect to Elm_Transit.
*
+ * @note This API is one of the facades. It creates wipe effect context
+ * and add it's required APIs to elm_transit_effect_add.
+ * @note This effect will be applied to the objects that are in the transit,
+ * If you change the set of objects in the transit with elm_transit_object_add()
+ * or elm_transit_object_remove(), the set of objects affected by this effect
+ * will be changed too.
+ *
* @see elm_transit_effect_add()
*
+ * @param transit Transit object.
* @param type Wipe type. Hide or show.
* @param dir Wipe Direction.
* @return Wipe effect context data.
*
* @ingroup Transit
+ * @warning Is higher recommended just create a transit with this effect when
+ * the window that the objects of the transit belongs has already been created.
+ * This is because this effect needs the geometry information about the objects,
+ * and if the window was not created yet, it can get a wrong information.
+ * @warning Is not recommended remove or add an object after the transit begins
+ * to run, because the order of the objects will be affected.
*/
EAPI void *
-elm_transit_effect_wipe_context_new(Elm_Fx_Wipe_Type type, Elm_Fx_Wipe_Dir dir)
+elm_transit_effect_wipe_add(Elm_Transit *transit, Elm_Fx_Wipe_Type type, Elm_Fx_Wipe_Dir dir)
{
- Elm_Fx_Wipe *wipe;
-
- wipe = ELM_NEW(Elm_Fx_Wipe);
- if (!wipe) return NULL;
-
- wipe->type = type;
- wipe->dir = dir;
+ ELM_TRANSIT_CHECK_OR_RETURN(transit, NULL);
- return wipe;
+ void *effect_context = _transit_effect_wipe_context_new(type, dir);
+ if(!effect_context) return NULL;
+ elm_transit_effect_add(transit,
+ _transit_effect_wipe_op, effect_context,
+ _transit_effect_wipe_context_free);
+ return effect_context;
}
+
///////////////////////////////////////////////////////////////////////////////
//Color FX
///////////////////////////////////////////////////////////////////////////////
} to;
};
-/**
- * The Free function to Color Effect context data.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- *
- * This function belongs to the Color effect, which consists of
- * functions:
- * - elm_transit_effect_color_context_new()
- * - elm_transit_effect_color_op()
- * - elm_transit_effect_color_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Color context data.
- * @param transit Transit object.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_color_context_free(void *data, Elm_Transit *transit __UNUSED__)
+void
+_transit_effect_color_context_free(void *data, Elm_Transit *transit __UNUSED__)
{
free(data);
}
-/**
- * Operation function to the Color Effect.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- * @note This effect will be applied to the objects that are in the transit,
- * If you change the set of objects in the transit with elm_transit_object_add()
- * or elm_transit_object_remove(), the set of objects affected by this effect
- * will be changed too.
- *
- * This function belongs to the Color effect, which consists of
- * functions:
- * - elm_transit_effect_color_context_new()
- * - elm_transit_effect_color_op()
- * - elm_transit_effect_color_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Color context data.
- * @param transit Transit object.
- * @param progress The time progression, it is a double value between 0.0 and 1.0.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_color_op(void *data, Elm_Transit *transit, double progress)
+void
+_transit_effect_color_op(void *data, Elm_Transit *transit, double progress)
{
EINA_SAFETY_ON_NULL_RETURN(data);
evas_object_color_set(obj, r, g, b, a);
}
+void *
+_transit_effect_color_context_new(unsigned int from_r, unsigned int from_g, unsigned int from_b, unsigned int from_a, unsigned int to_r, unsigned int to_g, unsigned int to_b, unsigned int to_a)
+{
+ Elm_Fx_Color *color;
+
+ color = ELM_NEW(Elm_Fx_Color);
+ if (!color) return NULL;
+
+ color->from.r = from_r;
+ color->from.g = from_g;
+ color->from.b = from_b;
+ color->from.a = from_a;
+ color->to.r = to_r - from_r;
+ color->to.g = to_g - from_g;
+ color->to.b = to_b - from_b;
+ color->to.a = to_a - from_a;
+
+ return color;
+}
+
/**
- * Get a new context data of Color Effect.
+ * Add the Color Effect to Elm_Transit.
*
+ * @note This API is one of the facades. It creates color effect context
+ * and add it's required APIs to elm_transit_effect_add.
+ * @note This effect will be applied to the objects that are in the transit,
+ * If you change the set of objects in the transit with elm_transit_object_add()
+ * or elm_transit_object_remove(), the set of objects affected by this effect
+ * will be changed too.
+ *
* @see elm_transit_effect_add()
*
- * This function belongs to the Color effect, which consists of
- * functions:
- * - elm_transit_effect_color_context_new()
- * - elm_transit_effect_color_op()
- * - elm_transit_effect_color_context_free()
- *
+ * @param transit Transit object.
* @param from_r RGB R when effect begins.
* @param from_g RGB G when effect begins.
* @param from_b RGB B when effect begins.
* @ingroup Transit
*/
EAPI void *
-elm_transit_effect_color_context_new(unsigned int from_r, unsigned int from_g, unsigned int from_b, unsigned int from_a, unsigned int to_r, unsigned int to_g, unsigned int to_b, unsigned int to_a)
+elm_transit_effect_color_add(Elm_Transit *transit, unsigned int from_r, unsigned int from_g, unsigned int from_b, unsigned int from_a, unsigned int to_r, unsigned int to_g, unsigned int to_b, unsigned int to_a)
{
- Elm_Fx_Color *color;
-
- color = ELM_NEW(Elm_Fx_Color);
- if (!color) return NULL;
-
- color->from.r = from_r;
- color->from.g = from_g;
- color->from.b = from_b;
- color->from.a = from_a;
- color->to.r = to_r - from_r;
- color->to.g = to_g - from_g;
- color->to.b = to_b - from_b;
- color->to.a = to_a - from_a;
+ ELM_TRANSIT_CHECK_OR_RETURN(transit, NULL);
- return color;
+ void *effect_context = _transit_effect_color_context_new(from_r, from_g, from_b, from_a, to_r, to_g, to_b, to_a);
+ if(!effect_context) return NULL;
+ elm_transit_effect_add(transit,
+ _transit_effect_color_op, effect_context,
+ _transit_effect_color_context_free);
+ return effect_context;
}
///////////////////////////////////////////////////////////////////////////////
return data_list;
}
-/**
- * The Free function to Fade Effect context data.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- *
- * This function belongs to the Fade effect, which consists of
- * functions:
- * - elm_transit_effect_fade_context_new()
- * - elm_transit_effect_fade_op()
- * - elm_transit_effect_fade_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Fade context data.
- * @param transit Transit object.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_fade_context_free(void *data, Elm_Transit *transit __UNUSED__)
+void
+_transit_effect_fade_context_free(void *data, Elm_Transit *transit __UNUSED__)
{
EINA_SAFETY_ON_NULL_RETURN(data);
free(fade);
}
-/**
- * Operation function to the Fade Effect
- *
- * This effect is applied to each pair of objects in the order they are listed
- * in the transit list of objects. The first object in the pair will be the
- * "before" object and the second will be the "after" object.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- * @note When this function begins to be called, it gets the current objects in
- * the transit, that is, elm_transit_object_remove() and elm_transit_object_add()
- * will not cause any changes in the set of objects that this effect is being
- * applied if these functions are called after the @p transit starts to run.
- *
- * This function belongs to the Fade effect, which consists of
- * functions:
- * - elm_transit_effect_fade_context_new()
- * - elm_transit_effect_fade_op()
- * - elm_transit_effect_fade_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Fade context data.
- * @param transit Transit object.
- * @param progress The time progression, it is a double value between 0.0 and 1.0.
- *
- * @ingroup Transit
- * @warning Is higher recommended just create a transit with this effect when
- * the window that the objects of the transit belongs has already been created.
- * This is because this effect needs the color information about the objects,
- * and if the window was not created yet, it can get a wrong information.
- * @warning Is not recommended remove or add an object after the transit begins
- * to run, because the order of the objects will be affected.
- */
-EAPI void
-elm_transit_effect_fade_op(void *data, Elm_Transit *transit __UNUSED__, double progress)
+void
+_transit_effect_fade_op(void *data, Elm_Transit *transit __UNUSED__, double progress)
{
EINA_SAFETY_ON_NULL_RETURN(data);
}
}
+void *
+_transit_effect_fade_context_new(void)
+{
+ Elm_Fx_Fade *fade;
+ fade = ELM_NEW(Elm_Fx_Fade);
+ if (!fade) return NULL;
+ return fade;
+}
+
/**
- * Get a new context data of Fade Effect.
- *
- * This function belongs to the Fade effect, which consists of
- * functions:
- * - elm_transit_effect_fade_context_new()
- * - elm_transit_effect_fade_op()
- * - elm_transit_effect_fade_context_free()
+ * Add the Fade Effect to Elm_Transit.
*
+ * @note This API is one of the facades. It creates fade effect context
+ * and add it's required APIs to elm_transit_effect_add.
+ * @note This effect is applied to each pair of objects in the order they are listed
+ * in the transit list of objects. The first object in the pair will be the
+ * "before" object and the second will be the "after" object.
+ * @note When this function is called, it gets the current objects in
+ * the transit, that is, elm_transit_object_remove() and elm_transit_object_add()
+ * will not cause any changes in the set of objects that this effect is being
+ * applied.
+ *
* @see elm_transit_effect_add()
*
+ * @param transit Transit object.
* @return Fade effect context data.
- *
+ *
* @ingroup Transit
+ * @warning Is higher recommended just create a transit with this effect when
+ * the window that the objects of the transit belongs has already been created.
+ * This is because this effect needs the color information about the objects,
+ * and if the window was not created yet, it can get a wrong information.
+ * @warning Is not recommended remove or add an object after the transit begins
+ * to run, because the order of the objects will be affected.
*/
EAPI void *
-elm_transit_effect_fade_context_new(void)
+elm_transit_effect_fade_add(Elm_Transit *transit)
{
- Elm_Fx_Fade *fade;
- fade = ELM_NEW(Elm_Fx_Fade);
- if (!fade) return NULL;
- return fade;
+ ELM_TRANSIT_CHECK_OR_RETURN(transit, NULL);
+
+ void *effect_context = _transit_effect_fade_context_new();
+ if(!effect_context) return NULL;
+ elm_transit_effect_add(transit,
+ _transit_effect_fade_op, effect_context,
+ _transit_effect_fade_context_free);
+ return effect_context;
}
+
///////////////////////////////////////////////////////////////////////////////
//Blend FX
///////////////////////////////////////////////////////////////////////////////
return data_list;
}
-/**
- * The Free function to Blend Effect context data.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- *
- * This function belongs to the Blend effect, which consists of
- * functions:
- * - elm_transit_effect_blend_context_new()
- * - elm_transit_effect_blend_op()
- * - elm_transit_effect_blend_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Blend context data.
- * @param transit Transit object.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_blend_context_free(void *data, Elm_Transit *transit __UNUSED__)
+void
+_transit_effect_blend_context_free(void *data, Elm_Transit *transit __UNUSED__)
{
EINA_SAFETY_ON_NULL_RETURN(data);
free(data);
}
-/**
- * Operation function to the Blend Effect.
- *
- * This effect is applied to each pair of objects in the order they are listed
- * in the transit list of objects. The first object in the pair will be the
- * "before" object and the second will be the "after" object.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- * @note When this function begins to be called, it gets the current objects in
- * the transit, that is, elm_transit_object_remove() and elm_transit_object_add()
- * will not cause any changes in the set of objects that this effect is being
- * applied if these functions are called after the @p transit starts to run.
- *
- * This function belongs to the Blend effect, which consists of
- * functions:
- * - elm_transit_effect_blend_context_new()
- * - elm_transit_effect_blend_op()
- * - elm_transit_effect_blend_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Blend context data.
- * @param transit Transit object.
- * @param progress The time progression, it is a double value between 0.0 and 1.0.
- *
- * @ingroup Transit
- * @warning Is higher recommended just create a transit with this effect when
- * the window that the objects of the transit belongs has already been created.
- * This is because this effect needs the color information about the objects,
- * and if the window was not created yet, it can get a wrong information.
- * @warning Is not recommended remove or add an object after the transit begins
- * to run, because the order of the objects will be affected.
- */
-EAPI void
-elm_transit_effect_blend_op(void *data, Elm_Transit *transit, double progress)
+void
+_transit_effect_blend_op(void *data, Elm_Transit *transit, double progress)
{
EINA_SAFETY_ON_NULL_RETURN(data);
}
}
+void *
+_transit_effect_blend_context_new(void)
+{
+ Elm_Fx_Blend *blend;
+
+ blend = ELM_NEW(Elm_Fx_Blend);
+ if (!blend) return NULL;
+
+ return blend;
+}
+
/**
- * Get a new context data of Blend Effect.
+ * Add the Blend Effect to Elm_Transit.
*
+ * @note This API is one of the facades. It creates blend effect context
+ * and add it's required APIs to elm_transit_effect_add.
+ * @note This effect is applied to each pair of objects in the order they are listed
+ * in the transit list of objects. The first object in the pair will be the
+ * "before" object and the second will be the "after" object.
+ * @note When this function be called, it gets the current objects in
+ * the transit, that is, elm_transit_object_remove() and elm_transit_object_add()
+ * will not cause any changes in the set of objects that this effect is being
+ * applied.
+ *
* @see elm_transit_effect_add()
*
- * This function belongs to the Blend effect, which consists of
- * functions:
- * - elm_transit_effect_blend_context_new()
- * - elm_transit_effect_blend_op()
- * - elm_transit_effect_blend_context_free()
- *
+ * @param transit Transit object.
* @return Blend effect context data.
- *
+ *
* @ingroup Transit
+ * @warning Is higher recommended just create a transit with this effect when
+ * the window that the objects of the transit belongs has already been created.
+ * This is because this effect needs the color information about the objects,
+ * and if the window was not created yet, it can get a wrong information.
+ * @warning Is not recommended remove or add an object after the transit begins
+ * to run, because the order of the objects will be affected.
*/
EAPI void *
-elm_transit_effect_blend_context_new(void)
+elm_transit_effect_blend_add(Elm_Transit *transit)
{
- Elm_Fx_Blend *blend;
-
- blend = ELM_NEW(Elm_Fx_Blend);
- if (!blend) return NULL;
+ ELM_TRANSIT_CHECK_OR_RETURN(transit, NULL);
- return blend;
+ void *effect_context = _transit_effect_blend_context_new();
+ if(!effect_context) return NULL;
+ elm_transit_effect_add(transit,
+ _transit_effect_blend_op, effect_context,
+ _transit_effect_blend_context_free);
+ return effect_context;
}
+
///////////////////////////////////////////////////////////////////////////////
//Rotation FX
///////////////////////////////////////////////////////////////////////////////
float from, to;
};
-/**
- * The Free function to Rotation Effect context data.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- *
- * This function belongs to the Rotation effect, which consists of
- * functions:
- * - elm_transit_effect_rotation_context_new()
- * - elm_transit_effect_rotation_op()
- * - elm_transit_effect_rotation_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Rotation context data.
- * @param transit Transit object.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_rotation_context_free(void *data, Elm_Transit *transit __UNUSED__)
+void
+_transit_effect_rotation_context_free(void *data, Elm_Transit *transit __UNUSED__)
{
free(data);
}
-/**
- * Operation function to the Rotation Effect
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- * @note This effect will be applied to the objects that are in the transit,
- * If you change the set of objects in the transit with elm_transit_object_add()
- * or elm_transit_object_remove(), the set of objects affected by this effect
- * will be changed too.
- *
- * This function belongs to the Rotation effect, which consists of
- * functions:
- * - elm_transit_effect_rotation_context_new()
- * - elm_transit_effect_rotation_op()
- * - elm_transit_effect_rotation_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Rotation context data.
- * @param transit Transit object.
- * @param progress The time progression, it is a double value between 0.0 and 1.0.
- *
- * @ingroup Transit
- * @warning Is higher recommended just create a transit with this effect when
- * the window that the objects of the transit belongs has already been created.
- * This is because this effect needs the geometry information about the objects,
- * and if the window was not created yet, it can get a wrong information.
- * @warning Is not recommended remove or add an object after the transit begins
- * to run, because the order of the objects will be affected.
- */
-EAPI void
-elm_transit_effect_rotation_op(void *data, Elm_Transit *transit, double progress)
+void
+_transit_effect_rotation_op(void *data, Elm_Transit *transit, double progress)
{
EINA_SAFETY_ON_NULL_RETURN(data);
evas_map_free(map);
}
+void *
+_transit_effect_rotation_context_new(float from_degree, float to_degree, Eina_Bool cw)
+{
+ Elm_Fx_Rotation *rotation;
+
+ rotation = ELM_NEW(Elm_Fx_Rotation);
+ if (!rotation) return NULL;
+
+ rotation->from = from_degree;
+ rotation->to = to_degree - from_degree;
+ rotation->cw = cw;
+
+ return rotation;
+}
+
/**
- * Get a new context data of Rotation Effect.
- *
- * This function belongs to the Rotation effect, which consists of
- * functions:
- * - elm_transit_effect_rotation_context_new()
- * - elm_transit_effect_rotation_op()
- * - elm_transit_effect_rotation_context_free()
+ * Add the Rotation Effect to Elm_Transit.
*
+ * @note This API is one of the facades. It creates rotation effect context
+ * and add it's required APIs to elm_transit_effect_add.
+ * @note This effect will be applied to the objects that are in the transit,
+ * If you change the set of objects in the transit with elm_transit_object_add()
+ * or elm_transit_object_remove(), the set of objects affected by this effect
+ * will be changed too.
+ *
* @see elm_transit_effect_add()
*
+ * @param transit Transit object.
* @param from_degree Degree when effect begins.
* @param to_degree Degree when effect is ends.
* @param cw Rotation direction. EINA_TRUE is clock wise.
* @return Rotation effect context data.
- *
+ *
* @ingroup Transit
+ * @warning Is higher recommended just create a transit with this effect when
+ * the window that the objects of the transit belongs has already been created.
+ * This is because this effect needs the geometry information about the objects,
+ * and if the window was not created yet, it can get a wrong information.
+ * @warning Is not recommended remove or add an object after the transit begins
+ * to run, because the order of the objects will be affected.
*/
EAPI void *
-elm_transit_effect_rotation_context_new(float from_degree, float to_degree, Eina_Bool cw)
+elm_transit_effect_rotation_add(Elm_Transit *transit, float from_degree, float to_degree, Eina_Bool cw)
{
- Elm_Fx_Rotation *rotation;
-
- rotation = ELM_NEW(Elm_Fx_Rotation);
- if (!rotation) return NULL;
-
- rotation->from = from_degree;
- rotation->to = to_degree - from_degree;
- rotation->cw = cw;
+ ELM_TRANSIT_CHECK_OR_RETURN(transit, NULL);
- return rotation;
+ void *effect_context = _transit_effect_rotation_context_new(from_degree, to_degree, cw);
+ if(!effect_context) return NULL;
+ elm_transit_effect_add(transit,
+ _transit_effect_rotation_op, effect_context,
+ _transit_effect_rotation_context_free);
+ return effect_context;
}
+
///////////////////////////////////////////////////////////////////////////////
// ImageAnimation FX
///////////////////////////////////////////////////////////////////////////////
Eina_List *images;
};
-/**
- * The Free function to Image Animation Effect context data.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- *
- * This function belongs to the Image Animation effect, which consists of
- * functions:
- * - elm_transit_effect_image_animation_context_new()
- * - elm_transit_effect_image_animation_op()
- * - elm_transit_effect_image_animation_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Imagem Animation context data.
- * @param transit Transit object.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_image_animation_context_free(void *data, Elm_Transit *transit __UNUSED__)
+void
+_transit_effect_image_animation_context_free(void *data, Elm_Transit *transit __UNUSED__)
{
EINA_SAFETY_ON_NULL_RETURN(data);
free(data);
}
-/**
- * Operation function to the Imagem Animation Effect.
- *
- * This effect changes the image from an icon object in the @p transit.
- *
- * @note You not need to call this function, just pass as parameter to
- * elm_transit_effect_add() function.
- * @note This effect will be applied to the objects that are in the transit,
- * If you change the set of objects in the transit with elm_transit_object_add()
- * or elm_transit_object_remove(), the set of objects affected by this effect
- * will be changed too.
- *
- * This function belongs to the Image Animation effect, which consists of
- * functions:
- * - elm_transit_effect_image_animation_context_new()
- * - elm_transit_effect_image_animation_op()
- * - elm_transit_effect_image_animation_context_free()
- *
- * @see elm_transit_effect_add()
- *
- * @param data The Imagem Animation context data.
- * @param transit Transit object.
- * @param progress The time progression, it is a double value between 0.0 and 1.0.
- *
- * @ingroup Transit
- */
-EAPI void
-elm_transit_effect_image_animation_op(void *data, Elm_Transit *transit, double progress)
+void
+_transit_effect_image_animation_op(void *data, Elm_Transit *transit, double progress)
{
EINA_SAFETY_ON_NULL_RETURN(data);
eina_stringshare_del(type);
}
+void *
+_transit_effect_image_animation_context_new(Eina_List *images)
+{
+ Elm_Fx_Image_Animation *image_animation;
+
+ image_animation = ELM_NEW(Elm_Fx_Image_Animation);
+
+ if (!image_animation) return NULL;
+
+ image_animation->images = images;
+
+ return image_animation;
+}
+
/**
- * Get a new context data of Imagem Animation Effect.
+ * Add the Rotation Effect to Elm_Transit.
*
+ * @note This API is one of the facades. It creates image animation effect context
+ * and add it's required APIs to elm_transit_effect_add.
* The @p images parameter is a list images paths. This list and
* its contents will be deleted at the end of the effect by
* elm_transit_effect_image_animation_context_free() function.
+ * @note This effect will be applied to the objects that are in the transit,
+ * If you change the set of objects in the transit with elm_transit_object_add()
+ * or elm_transit_object_remove(), the set of objects affected by this effect
+ * will be changed too.
*
* Example:
* @code
*
* snprintf(buf, sizeof(buf), "%s/images/logo_small.png", PACKAGE_DATA_DIR);
* images = eina_list_append(images, eina_stringshare_add(buf));
+ * elm_transit_effect_image_animation_add(transi, images);
*
- * elm_transit_effect_add(transit,
- * elm_transit_effect_image_animation_op,
- * elm_transit_effect_image_animation_context_new(images),
- * elm_transit_effect_image_animation_context_free);
* @endcode
- *
- * This function belongs to the Image Animation effect, which consists of
- * functions:
- * - elm_transit_effect_image_animation_context_new()
- * - elm_transit_effect_image_animation_op()
- * - elm_transit_effect_image_animation_context_free()
- *
+ *
* @see elm_transit_effect_add()
*
+ * @param transit Transit object.
* @param images Eina_List of images file paths. This list and
* its contents will be deleted at the end of the effect by
* elm_transit_effect_image_animation_context_free() function.
* @return Image Animation effect context data.
- *
+ *
* @ingroup Transit
*/
EAPI void *
-elm_transit_effect_image_animation_context_new(Eina_List *images)
+elm_transit_effect_image_animation_add(Elm_Transit *transit, Eina_List *images)
{
- Elm_Fx_Image_Animation *image_animation;
-
- image_animation = ELM_NEW(Elm_Fx_Image_Animation);
-
- if (!image_animation) return NULL;
-
- image_animation->images = images;
+ ELM_TRANSIT_CHECK_OR_RETURN(transit, NULL);
- return image_animation;
+ void *effect_context = _transit_effect_image_animation_context_new(images);
+ if(!effect_context) return NULL;
+ elm_transit_effect_add(transit,
+ _transit_effect_image_animation_op, effect_context,
+ _transit_effect_image_animation_context_free);
+ return effect_context;
}
projects / platform / upstream / elementary.git / commitdiff