hwmon: (max6650) Add initial rpm target devicetree documentation

Add devicetree property for early initialization of the fan controller
to prevent overheating, for example when resetting the board while the
fan was completely turned off.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt
index d6c10e3680cb0de47226c98f132fa7561ca43e3a..f6bd87d8e284560bb5a3d141d6f7c4eda751edd9 100644 (file)
--- a/Documentation/devicetree/bindings/hwmon/max6650.txt
+++ b/Documentation/devicetree/bindings/hwmon/max6650.txt
@@ -13,6 +13,10 @@ Optional properties, default is to retain the chip's current setting:
 - maxim,fan-prescale  : Pre-scaling value, as per datasheet [1]. Lower values
                        allow more fine-grained control of slower fans.
                        Valid: 1, 2, 4, 8, 16.
+- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the
+                       driver selects closed-loop mode and the requested speed.
+                       This ensures the fan is already running before userspace
+                       takes over.
 
 Example:
        fan-max6650: max6650@1b {
@@ -20,4 +24,5 @@ Example:
                compatible = "maxim,max6650";
                maxim,fan-microvolt = <12000000>;
                maxim,fan-prescale = <4>;
+               maxim,fan-target-rpm = <1200>;
        };