Staging: rtl8187se: r8185b_init.c: Fix some spacing issues
authorAndrew Miller <amiller@amilx.com>
Fri, 16 Mar 2012 22:47:38 +0000 (18:47 -0400)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 10 Apr 2012 16:22:41 +0000 (09:22 -0700)
Fix some more spacing issues I missed before

Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/rtl8187se/r8185b_init.c

index 5650ef1..3f9be9b 100644 (file)
@@ -71,10 +71,10 @@ static u8 MAC_REG_TABLE[][2] =      {
 
        /* PAGA 0: */
        {0x5e, 0x00}, {0x9f, 0x03}
-                       };
+       };
 
 
-static u8  ZEBRA_AGC[] =       {
+static u8  ZEBRA_AGC[] = {
        0,
        0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
        0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
@@ -94,7 +94,7 @@ static u32 ZEBRA_RF_RX_GAIN_TABLE[] = {
        0x0183, 0x0163, 0x0143, 0x0123, 0x0103
        };
 
-static u8 OFDM_CONFIG[]        =       {
+static u8 OFDM_CONFIG[]        = {
        /* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */
        /* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */
        /* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */
@@ -121,22 +121,20 @@ void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data)
 {
        write_nic_byte(dev, offset, data);
        read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
-
 }
 
 void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data)
 {
        write_nic_word(dev, offset, data);
        read_nic_word(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
-
-
 }
+
 u8 PlatformIORead1Byte(struct net_device *dev, u32 offset);
 
 void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
 {
 /* {by amy 080312 */
-       if (offset == PhyAddr)  {
+       if (offset == PhyAddr) {
        /* For Base Band configuration. */
                unsigned char   cmdByte;
                unsigned long   dataBytes;
@@ -156,7 +154,7 @@ void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
                */
                /* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */
 
-               for (idx = 0; idx < 30; idx++)  { 
+               for (idx = 0; idx < 30; idx++) {
                /* Make sure command bit is clear before access it. */
                        u1bTmp = PlatformIORead1Byte(dev, PhyAddr);
                        if ((u1bTmp & BIT7) == 0)
@@ -224,9 +222,9 @@ static int HwHSSIThreeWire(struct net_device *dev,
        u8      TryCnt;
        u8      u1bTmp;
 
-       do      {
+       do {
                /* Check if WE and RE are cleared. */
-               for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++)     {
+               for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
                        u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
                        if ((u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0)
                                break;
@@ -252,7 +250,7 @@ static int HwHSSIThreeWire(struct net_device *dev,
 
                write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
 
-               if (bSI)        {
+               if (bSI) {
                        /* jong: HW SI read must set reg84[3]=0. */
                        u1bTmp = read_nic_byte(dev, RFPinsSelect);
                        u1bTmp &= ~BIT3;
@@ -260,14 +258,14 @@ static int HwHSSIThreeWire(struct net_device *dev,
                }
                /*  Fill up data buffer for write operation. */
 
-               if (bWrite)     {
-                       if (nDataBufBitCnt == 16)       {
+               if (bWrite) {
+                       if (nDataBufBitCnt == 16) {
                                write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
-                       }       else if (nDataBufBitCnt == 64)  {
+                       } else if (nDataBufBitCnt == 64) {
                        /* RTL8187S shouldn't enter this case */
                                write_nic_dword(dev, SW_3W_DB0, *((u32 *)pDataBuf));
                                write_nic_dword(dev, SW_3W_DB1, *((u32 *)(pDataBuf + 4)));
-                       }       else    {
+                       } else {
                                int idx;
                                int ByteCnt = nDataBufBitCnt / 8;
                                                                /* printk("%d\n",nDataBufBitCnt); */
@@ -293,11 +291,11 @@ static int HwHSSIThreeWire(struct net_device *dev,
                                        write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx));
 
                        }
-               }       else    {       /* read */
-                       if (bSI)        {
+               } else {        /* read */
+                       if (bSI) {
                                /* SI - reg274[3:0] : RF register's Address */
                                write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
-                       }       else    {
+                       } else {
                                /*  PI - reg274[15:12] : RF register's Address */
                                write_nic_word(dev, SW_3W_DB0, (*((u16 *)pDataBuf)) << 12);
                        }
@@ -323,11 +321,11 @@ static int HwHSSIThreeWire(struct net_device *dev,
                write_nic_byte(dev, SW_3W_CMD1, 0);
 
                /* Read back data for read operation. */
-               if (bWrite == 0)        {
-                       if (bSI)                {
+               if (bWrite == 0) {
+                       if (bSI) {
                                /* Serial Interface : reg363_362[11:0] */
                                *((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ) ;
-                       }       else    {
+                       } else {
                                /* Parallel Interface : reg361_360[11:0] */
                                *((u16 *)pDataBuf) = read_nic_word(dev, PI_DATA_READ);
                        }
@@ -335,7 +333,7 @@ static int HwHSSIThreeWire(struct net_device *dev,
                        *((u16 *)pDataBuf) &= 0x0FFF;
                }
 
-       }       while (0);
+       } while (0);
 
        return bResult;
 }
@@ -1296,7 +1294,7 @@ bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u
                Prevent the race condition of RF state change. By Bruce, 2007-11-28.
                Only one thread can change the RF state at one time, and others should wait to be executed.
        */
-       while (true)    {
+       while (true) {
                spin_lock_irqsave(&priv->rf_ps_lock, flag);
                if (priv->RFChangeInProgress) {
                        spin_unlock_irqrestore(&priv->rf_ps_lock, flag);