select ARM_AMBA
select ARCH_HAS_CPUFREQ
select COMMON_CLK
- select CLK_VERSATILE
+ select COMMON_CLK_VERSATILE
select HAVE_TCM
select ICST
select GENERIC_CLOCKEVENTS
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARM_AMBA
- select CLKDEV_LOOKUP
- select HAVE_MACH_CLKDEV
+ select COMMON_CLK
+ select COMMON_CLK_VERSATILE
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
- select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
#include <linux/ata_platform.h>
#include <linux/amba/mmci.h>
#include <linux/gfp.h>
-#include <linux/clkdev.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
.cd_invert = true,
};
-/*
- * Clock handling
- */
-static const struct icst_params realview_oscvco_params = {
- .ref = 24000000,
- .vco_max = ICST307_VCO_MAX,
- .vco_min = ICST307_VCO_MIN,
- .vd_min = 4 + 8,
- .vd_max = 511 + 8,
- .rd_min = 1 + 2,
- .rd_max = 127 + 2,
- .s2div = icst307_s2div,
- .idx2s = icst307_idx2s,
-};
-
-static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
- void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
- u32 val;
-
- val = readl(clk->vcoreg) & ~0x7ffff;
- val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
- writel(0xa05f, sys_lock);
- writel(val, clk->vcoreg);
- writel(0, sys_lock);
-}
-
-static const struct clk_ops oscvco_clk_ops = {
- .round = icst_clk_round,
- .set = icst_clk_set,
- .setvco = realview_oscvco_set,
-};
-
-static struct clk oscvco_clk = {
- .ops = &oscvco_clk_ops,
- .params = &realview_oscvco_params,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
- .rate = 24000000,
-};
-
-static struct clk sp804_clk = {
- .rate = 1000000,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
- { /* Bus clock */
- .con_id = "apb_pclk",
- .clk = &dummy_apb_pclk,
- }, { /* UART0 */
- .dev_id = "dev:uart0",
- .clk = &ref24_clk,
- }, { /* UART1 */
- .dev_id = "dev:uart1",
- .clk = &ref24_clk,
- }, { /* UART2 */
- .dev_id = "dev:uart2",
- .clk = &ref24_clk,
- }, { /* UART3 */
- .dev_id = "fpga:uart3",
- .clk = &ref24_clk,
- }, { /* UART3 is on the dev chip in PB1176 */
- .dev_id = "dev:uart3",
- .clk = &ref24_clk,
- }, { /* UART4 only exists in PB1176 */
- .dev_id = "fpga:uart4",
- .clk = &ref24_clk,
- }, { /* KMI0 */
- .dev_id = "fpga:kmi0",
- .clk = &ref24_clk,
- }, { /* KMI1 */
- .dev_id = "fpga:kmi1",
- .clk = &ref24_clk,
- }, { /* MMC0 */
- .dev_id = "fpga:mmc0",
- .clk = &ref24_clk,
- }, { /* CLCD is in the PB1176 and EB DevChip */
- .dev_id = "dev:clcd",
- .clk = &oscvco_clk,
- }, { /* PB:CLCD */
- .dev_id = "issp:clcd",
- .clk = &oscvco_clk,
- }, { /* SSP */
- .dev_id = "dev:ssp0",
- .clk = &ref24_clk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .clk = &sp804_clk,
- },
-};
-
void __init realview_init_early(void)
{
void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
- if (machine_is_realview_pb1176())
- oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET;
- else
- oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET;
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
}
+++ /dev/null
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
- unsigned long rate;
- const struct clk_ops *ops;
- const struct icst_params *params;
- void __iomem *vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
else
timer_irq = IRQ_EB_TIMER0_1;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(timer_irq);
realview_eb_twd_init();
}
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), true);
realview_timer_init(IRQ_DC1176_TIMER0);
}
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_TC11MP_TIMER0_1);
realview_pb11mp_twd_init();
}
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
#include <asm/leds.h>
timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_PBA8_TIMER0_1);
}
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
#include <asm/leds.h>
timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_PBX_TIMER0_1);
realview_pbx_twd_init();
}
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microlectronics.
+config COMMON_CLK_VERSATILE
+ tristate "Clock driver for ARM Reference designs"
+ depends on ARCH_INTEGRATOR || ARCH_REALVIEW
+ ---help---
+ Supports clocking on ARM Reference designs Integrator/AP,
+ Integrator/CP, RealView PB1176, EB, PB11MP and PBX.
+
endmenu
obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-$(CONFIG_ARCH_U300) += clk-u300.o
-obj-$(CONFIG_ARCH_INTEGRATOR) += versatile/
+obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o
# Chip specific
# Makefile for Versatile-specific clocks
obj-$(CONFIG_ICST) += clk-icst.o
obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o
+obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o
--- /dev/null
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#include "clk-icst.h"
+
+/*
+ * Implementation of the ARM RealView clock trees.
+ */
+
+static void __iomem *sys_lock;
+static void __iomem *sys_vcoreg;
+
+/**
+ * realview_oscvco_get() - get ICST OSC settings for the RealView
+ */
+static struct icst_vco realview_oscvco_get(void)
+{
+ u32 val;
+ struct icst_vco vco;
+
+ val = readl(sys_vcoreg);
+ vco.v = val & 0x1ff;
+ vco.r = (val >> 9) & 0x7f;
+ vco.s = (val >> 16) & 03;
+ return vco;
+}
+
+static void realview_oscvco_set(struct icst_vco vco)
+{
+ u32 val;
+
+ val = readl(sys_vcoreg) & ~0x7ffff;
+ val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+ /* This magic unlocks the CM VCO so it can be controlled */
+ writel(0xa05f, sys_lock);
+ writel(val, sys_vcoreg);
+ /* This locks the CM again */
+ writel(0, sys_lock);
+}
+
+static const struct icst_params realview_oscvco_params = {
+ .ref = 24000000,
+ .vco_max = ICST307_VCO_MAX,
+ .vco_min = ICST307_VCO_MIN,
+ .vd_min = 4 + 8,
+ .vd_max = 511 + 8,
+ .rd_min = 1 + 2,
+ .rd_max = 127 + 2,
+ .s2div = icst307_s2div,
+ .idx2s = icst307_idx2s,
+};
+
+static const struct clk_icst_desc __initdata realview_icst_desc = {
+ .params = &realview_oscvco_params,
+ .getvco = realview_oscvco_get,
+ .setvco = realview_oscvco_set,
+};
+
+/*
+ * realview_clk_init() - set up the RealView clock tree
+ */
+void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176)
+{
+ struct clk *clk;
+
+ sys_lock = sysbase + REALVIEW_SYS_LOCK_OFFSET;
+ if (is_pb1176)
+ sys_vcoreg = sysbase + REALVIEW_SYS_OSC0_OFFSET;
+ else
+ sys_vcoreg = sysbase + REALVIEW_SYS_OSC4_OFFSET;
+
+
+ /* APB clock dummy */
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ /* 24 MHz clock */
+ clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
+ 24000000);
+ clk_register_clkdev(clk, NULL, "dev:uart0");
+ clk_register_clkdev(clk, NULL, "dev:uart1");
+ clk_register_clkdev(clk, NULL, "dev:uart2");
+ clk_register_clkdev(clk, NULL, "fpga:kmi0");
+ clk_register_clkdev(clk, NULL, "fpga:kmi1");
+ clk_register_clkdev(clk, NULL, "fpga:mmc0");
+ clk_register_clkdev(clk, NULL, "dev:ssp0");
+ if (is_pb1176) {
+ /*
+ * UART3 is on the dev chip in PB1176
+ * UART4 only exists in PB1176
+ */
+ clk_register_clkdev(clk, NULL, "dev:uart3");
+ clk_register_clkdev(clk, NULL, "dev:uart4");
+ } else
+ clk_register_clkdev(clk, NULL, "fpga:uart3");
+
+
+ /* 1 MHz clock */
+ clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
+ 1000000);
+ clk_register_clkdev(clk, NULL, "sp804");
+
+ /* ICST VCO clock */
+ clk = icst_clk_register(NULL, &realview_icst_desc);
+ clk_register_clkdev(clk, NULL, "dev:clcd");
+ clk_register_clkdev(clk, NULL, "issp:clcd");
+}
--- /dev/null
+void realview_clk_init(void __iomem *sysbase, bool is_pb1176);
projects / platform / kernel / linux-exynos.git / commitdiff