/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
* sending probe req. This should be set long enough to hear probe responses
* from more than one AP. */
-#define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */
-#define IWL_ACTIVE_DWELL_TIME_52 (10)
+#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */
+#define IWL_ACTIVE_DWELL_TIME_52 (20)
+
+#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
+#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
/* For faster active scanning, scan will move to the next channel if fewer than
* PLCP_QUIET_THRESH packets are heard on this channel within
* no other traffic).
* Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
-#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */
+#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(10) /* msec */
/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
* Must be set longer than active dwell time.
#define IWL_PASSIVE_DWELL_BASE (100)
#define IWL_CHANNEL_TUNE_TIME 5
+#define IWL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1))))
+
static inline u16 iwl3945_get_active_dwell_time(struct iwl3945_priv *priv,
- enum ieee80211_band band)
+ enum ieee80211_band band,
+ u8 n_probes)
{
if (band == IEEE80211_BAND_5GHZ)
- return IWL_ACTIVE_DWELL_TIME_52;
+ return IWL_ACTIVE_DWELL_TIME_52 +
+ IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
else
- return IWL_ACTIVE_DWELL_TIME_24;
+ return IWL_ACTIVE_DWELL_TIME_24 +
+ IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
}
static u16 iwl3945_get_passive_dwell_time(struct iwl3945_priv *priv,
static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
enum ieee80211_band band,
- u8 is_active, u8 direct_mask,
+ u8 is_active, u8 n_probes,
struct iwl3945_scan_channel *scan_ch)
{
const struct ieee80211_channel *channels = NULL;
channels = sband->channels;
- active_dwell = iwl3945_get_active_dwell_time(priv, band);
+ active_dwell = iwl3945_get_active_dwell_time(priv, band, n_probes);
passive_dwell = iwl3945_get_passive_dwell_time(priv, band);
if (passive_dwell <= active_dwell)
else
scan_ch->type = 1; /* active */
- if (scan_ch->type & 1)
- scan_ch->type |= (direct_mask << 1);
+ if ((scan_ch->type & 1) && n_probes)
+ scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
scan_ch->active_dwell = cpu_to_le16(active_dwell);
scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
int rc = 0;
struct iwl3945_scan_cmd *scan;
struct ieee80211_conf *conf = NULL;
- u8 direct_mask;
+ u8 n_probes = 2;
enum ieee80211_band band;
conf = ieee80211_get_hw_conf(priv->hw);
scan->direct_scan[0].len = priv->direct_ssid_len;
memcpy(scan->direct_scan[0].ssid,
priv->direct_ssid, priv->direct_ssid_len);
- direct_mask = 1;
+ n_probes++;
} else if (!iwl3945_is_associated(priv) && priv->essid_len) {
IWL_DEBUG_SCAN
("Kicking off one direct scan for '%s' when not associated\n",
scan->direct_scan[0].id = WLAN_EID_SSID;
scan->direct_scan[0].len = priv->essid_len;
memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
- direct_mask = 1;
- } else {
+ n_probes++;
+ } else
IWL_DEBUG_SCAN("Kicking off one indirect scan.\n");
- direct_mask = 0;
- }
/* We don't build a direct scan probe request; the uCode will do
* that based on the direct_mask added to each channel entry */
if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
scan->filter_flags = RXON_FILTER_PROMISC_MSK;
- if (direct_mask)
- scan->channel_count =
- iwl3945_get_channels_for_scan(
- priv, band, 1, /* active */
- direct_mask,
- (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
- else
- scan->channel_count =
- iwl3945_get_channels_for_scan(
- priv, band, 0, /* passive */
- direct_mask,
- (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
+ scan->channel_count =
+ iwl3945_get_channels_for_scan(priv, band, 1, /* active */
+ n_probes,
+ (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
cmd.len += le16_to_cpu(scan->tx_cmd.len) +
scan->channel_count * sizeof(struct iwl3945_scan_channel);