linux-rp: Add missing patch from 2.6.20
authorRichard Purdie <richard@openedhand.com>
Tue, 26 Jun 2007 16:41:09 +0000 (16:41 +0000)
committerRichard Purdie <richard@openedhand.com>
Tue, 26 Jun 2007 16:41:09 +0000 (16:41 +0000)
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@2011 311d38ba-8fff-0310-9ca6-ca027cbcb966

meta/packages/linux/linux-rp-2.6.20/hostap-monitor-mode.patch [new file with mode: 0644]

diff --git a/meta/packages/linux/linux-rp-2.6.20/hostap-monitor-mode.patch b/meta/packages/linux/linux-rp-2.6.20/hostap-monitor-mode.patch
new file mode 100644 (file)
index 0000000..641fd19
--- /dev/null
@@ -0,0 +1,209 @@
+This is a patch that I've been maintaining for a few years, and I'd 
+really like to see it added to the mainstream zaurus kernel so I can 
+finally stop distributing my own.
+
+This patch only effects the card while in monitor mode, and does not 
+cause any known stability issues.
+
+http://patches.aircrack-ng.org/hostap-kernel-2.6.18.patch
+
+Rick Farina (Zero_Chaos)
+
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c  2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c    2006-09-21 01:30:18.000000000 -0400
+@@ -69,6 +69,9 @@
+       iface = netdev_priv(dev);
+       local = iface->local;
++      if (local->iw_mode == IW_MODE_MONITOR)
++              goto xmit;
++
+       if (skb->len < ETH_HLEN) {
+               printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb "
+                      "(len=%d)\n", dev->name, skb->len);
+@@ -234,6 +237,7 @@
+               memcpy(skb_put(skb, ETH_ALEN), &hdr.addr4, ETH_ALEN);
+       }
++xmit:
+       iface->stats.tx_packets++;
+       iface->stats.tx_bytes += skb->len;
+@@ -404,8 +408,6 @@
+       }
+       if (skb->len < 24) {
+-              printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb "
+-                     "(len=%d)\n", dev->name, skb->len);
+               ret = 0;
+               iface->stats.tx_dropped++;
+               goto fail;
+Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.orig
+Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.rej
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c        2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c  2006-09-21 01:30:18.000000000 -0400
+@@ -1005,6 +1005,35 @@
+       return fid;
+ }
++static int prism2_monitor_enable(struct net_device *dev)
++{
++      if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, 5)) {
++              printk(KERN_DEBUG "Port type setting for monitor mode "
++                      "failed\n");
++              return -EOPNOTSUPP;
++      }
++
++      if (hfa384x_cmd(dev, HFA384X_CMDCODE_TEST | (0x0a << 8),
++                           0, NULL, NULL)) {
++              printk(KERN_DEBUG "Could not enter testmode 0x0a\n");
++              return -EOPNOTSUPP;
++      }
++
++      if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
++                          HFA384X_WEPFLAGS_PRIVACYINVOKED |
++                          HFA384X_WEPFLAGS_HOSTENCRYPT |
++                          HFA384X_WEPFLAGS_HOSTDECRYPT)) {
++              printk(KERN_DEBUG "WEP flags setting failed\n");
++              return -EOPNOTSUPP;
++      }
++
++      if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, 1)) {
++              printk(KERN_DEBUG "Could not set promiscuous mode\n");
++              return -EOPNOTSUPP;
++      }
++
++      return 0;
++}
+ static int prism2_reset_port(struct net_device *dev)
+ {
+@@ -1031,6 +1060,10 @@
+                              "port\n", dev->name);
+       }
++      if (local->iw_mode == IW_MODE_MONITOR)
++              /* force mode 0x0a after port 0 reset */
++              return prism2_monitor_enable(dev);
++
+       /* It looks like at least some STA firmware versions reset
+        * fragmentation threshold back to 2346 after enable command. Restore
+        * the configured value, if it differs from this default. */
+@@ -1466,6 +1499,10 @@
+               return 1;
+       }
++      if (local->iw_mode == IW_MODE_MONITOR)
++              /* force mode 0x0a after port 0 reset */
++              prism2_monitor_enable(dev);
++
+       local->hw_ready = 1;
+       local->hw_reset_tries = 0;
+       local->hw_resetting = 0;
+@@ -3156,6 +3193,7 @@
+       local->func->hw_config = prism2_hw_config;
+       local->func->hw_reset = prism2_hw_reset;
+       local->func->hw_shutdown = prism2_hw_shutdown;
++      local->func->monitor_enable = prism2_monitor_enable;
+       local->func->reset_port = prism2_reset_port;
+       local->func->schedule_reset = prism2_schedule_reset;
+ #ifdef PRISM2_DOWNLOAD_SUPPORT
+Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_hw.c.orig
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c     2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c       2006-09-21 01:30:18.000000000 -0400
+@@ -1104,33 +1104,7 @@
+       printk(KERN_DEBUG "Enabling monitor mode\n");
+       hostap_monitor_set_type(local);
+-
+-      if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE,
+-                          HFA384X_PORTTYPE_PSEUDO_IBSS)) {
+-              printk(KERN_DEBUG "Port type setting for monitor mode "
+-                     "failed\n");
+-              return -EOPNOTSUPP;
+-      }
+-
+-      /* Host decrypt is needed to get the IV and ICV fields;
+-       * however, monitor mode seems to remove WEP flag from frame
+-       * control field */
+-      if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
+-                          HFA384X_WEPFLAGS_HOSTENCRYPT |
+-                          HFA384X_WEPFLAGS_HOSTDECRYPT)) {
+-              printk(KERN_DEBUG "WEP flags setting failed\n");
+-              return -EOPNOTSUPP;
+-      }
+-
+-      if (local->func->reset_port(dev) ||
+-          local->func->cmd(dev, HFA384X_CMDCODE_TEST |
+-                           (HFA384X_TEST_MONITOR << 8),
+-                           0, NULL, NULL)) {
+-              printk(KERN_DEBUG "Setting monitor mode failed\n");
+-              return -EOPNOTSUPP;
+-      }
+-
+-      return 0;
++      return local->func->reset_port(dev);
+ }
+@@ -1199,7 +1173,7 @@
+       local->iw_mode = *mode;
+       if (local->iw_mode == IW_MODE_MONITOR)
+-              hostap_monitor_mode_enable(local);
++              return hostap_monitor_mode_enable(local);
+       else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt &&
+                !local->fw_encrypt_ok) {
+               printk(KERN_DEBUG "%s: defaulting to host-based encryption as "
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c      2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c        2006-09-21 01:30:18.000000000 -0400
+@@ -331,7 +331,7 @@
+       if (local->iw_mode == IW_MODE_REPEAT)
+               return HFA384X_PORTTYPE_WDS;
+       if (local->iw_mode == IW_MODE_MONITOR)
+-              return HFA384X_PORTTYPE_PSEUDO_IBSS;
++              return 5; /*HFA384X_PORTTYPE_PSEUDO_IBSS;*/
+       return HFA384X_PORTTYPE_HOSTAP;
+ }
+Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_main.c.orig
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c       2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c 2006-09-21 01:30:18.000000000 -0400
+@@ -48,6 +48,8 @@
+       { 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID },
+       /* Samsung MagicLAN SWL-2210P */
+       { 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID },
++      /* NETGEAR MA311 */
++      { 0x1385, 0x3872, PCI_ANY_ID, PCI_ANY_ID },
+       { 0 }
+ };
+Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_pci.c.orig
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c       2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c 2006-09-21 01:30:18.000000000 -0400
+@@ -101,6 +101,7 @@
+       { 0xc250, 0x0002 } /* EMTAC A2424i */,
+       { 0xd601, 0x0002 } /* Z-Com XI300 */,
+       { 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */,
++      { 0xd601, 0x0010 } /* Zcomax XI-325H 100mW */,
+       { 0, 0}
+ };
+Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_plx.c.orig
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h      2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h        2006-09-21 01:30:18.000000000 -0400
+@@ -575,6 +575,7 @@
+       int (*hw_config)(struct net_device *dev, int initial);
+       void (*hw_reset)(struct net_device *dev);
+       void (*hw_shutdown)(struct net_device *dev, int no_disable);
++      int (*monitor_enable)(struct net_device *dev);
+       int (*reset_port)(struct net_device *dev);
+       void (*schedule_reset)(local_info_t *local);
+       int (*download)(local_info_t *local,