docs: powerpc: Fix misspellings and grammar errors

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326100853.173586-1-heying24@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

diff --git a/Documentation/powerpc/booting.rst b/Documentation/powerpc/booting.rst
index 2d0ec2f..11aa440 100644 (file)
--- a/Documentation/powerpc/booting.rst
+++ b/Documentation/powerpc/booting.rst
@@ -94,7 +94,7 @@ should:
 
         a) add your platform support as a _boolean_ option in
         arch/powerpc/Kconfig, following the example of PPC_PSERIES,
-        PPC_PMAC and PPC_MAPLE. The later is probably a good
+        PPC_PMAC and PPC_MAPLE. The latter is probably a good
         example of a board support to start from.
 
         b) create your main platform file as

diff --git a/Documentation/powerpc/dawr-power9.rst b/Documentation/powerpc/dawr-power9.rst
index c96ab6b..e55ac6a 100644 (file)
--- a/Documentation/powerpc/dawr-power9.rst
+++ b/Documentation/powerpc/dawr-power9.rst
@@ -4,7 +4,7 @@ DAWR issues on POWER9
 
 On POWER9 the Data Address Watchpoint Register (DAWR) can cause a checkstop
 if it points to cache inhibited (CI) memory. Currently Linux has no way to
-disinguish CI memory when configuring the DAWR, so (for now) the DAWR is
+distinguish CI memory when configuring the DAWR, so (for now) the DAWR is
 disabled by this commit::
 
     commit 9654153158d3e0684a1bdb76dbababdb7111d5a0

diff --git a/Documentation/powerpc/eeh-pci-error-recovery.rst b/Documentation/powerpc/eeh-pci-error-recovery.rst
index 438a87e..d6643a9 100644 (file)
--- a/Documentation/powerpc/eeh-pci-error-recovery.rst
+++ b/Documentation/powerpc/eeh-pci-error-recovery.rst
@@ -73,7 +73,7 @@ return all-ff's (0xff, 0xffff, 0xffffffff for 8/16/32-bit reads).
 This value was chosen because it is the same value you would
 get if the device was physically unplugged from the slot.
 This includes access to PCI memory, I/O space, and PCI config
-space.  Interrupts; however, will continued to be delivered.
+space.  Interrupts; however, will continue to be delivered.
 
 Detection and recovery are performed with the aid of ppc64
 firmware.  The programming interfaces in the Linux kernel

diff --git a/Documentation/powerpc/elfnote.rst b/Documentation/powerpc/elfnote.rst
index 0660224..3ec8d61 100644 (file)
--- a/Documentation/powerpc/elfnote.rst
+++ b/Documentation/powerpc/elfnote.rst
@@ -8,7 +8,7 @@ capabilities and information which can be used by a bootloader or userland.
 Types and Descriptors
 ---------------------
 
-The types to be used with the "PowerPC" namesapce are defined in [#f1]_.
+The types to be used with the "PowerPC" namespace are defined in [#f1]_.
 
        1) PPC_ELFNOTE_CAPABILITIES
 

diff --git a/Documentation/powerpc/firmware-assisted-dump.rst b/Documentation/powerpc/firmware-assisted-dump.rst
index 6c0ae07..e363fc4 100644 (file)
--- a/Documentation/powerpc/firmware-assisted-dump.rst
+++ b/Documentation/powerpc/firmware-assisted-dump.rst
@@ -207,7 +207,7 @@ Currently the dump will be copied from /proc/vmcore to a new file upon
 user intervention. The dump data available through /proc/vmcore will be
 in ELF format. Hence the existing kdump infrastructure (kdump scripts)
 to save the dump works fine with minor modifications. KDump scripts on
-major Distro releases have already been modified to work seemlessly (no
+major Distro releases have already been modified to work seamlessly (no
 user intervention in saving the dump) when FADump is used, instead of
 KDump, as dump mechanism.
 

diff --git a/Documentation/powerpc/kaslr-booke32.rst b/Documentation/powerpc/kaslr-booke32.rst
index 8b259fd..5681c1d 100644 (file)
--- a/Documentation/powerpc/kaslr-booke32.rst
+++ b/Documentation/powerpc/kaslr-booke32.rst
@@ -38,5 +38,5 @@ bit of the entropy to decide the index of the 64M zone. Then we chose a
 
                               kernstart_virt_addr
 
-To enable KASLR, set CONFIG_RANDOMIZE_BASE = y. If KASLR is enable and you
+To enable KASLR, set CONFIG_RANDOMIZE_BASE = y. If KASLR is enabled and you
 want to disable it at runtime, add "nokaslr" to the kernel cmdline.

diff --git a/Documentation/powerpc/mpc52xx.rst b/Documentation/powerpc/mpc52xx.rst
index 3026070..5243b17 100644 (file)
--- a/Documentation/powerpc/mpc52xx.rst
+++ b/Documentation/powerpc/mpc52xx.rst
@@ -34,7 +34,7 @@ To compile/use :
 Some remarks:
 
  - The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100
-   is not supported, and I'm not sure anyone is interesting in working on it
+   is not supported, and I'm not sure anyone is interested in working on it
    so. I didn't took 5xxx because there's apparently a lot of 5xxx that have
    nothing to do with the MPC5200. I also included the 'MPC' for the same
    reason.

diff --git a/Documentation/powerpc/papr_hcalls.rst b/Documentation/powerpc/papr_hcalls.rst
index 48fcf12..3d553e8 100644 (file)
--- a/Documentation/powerpc/papr_hcalls.rst
+++ b/Documentation/powerpc/papr_hcalls.rst
@@ -40,7 +40,7 @@ and any in-arguments for the hcall are provided in registers *r4-r12*. If values
 have to be passed through a memory buffer, the data stored in that buffer should be
 in Big-endian byte order.
 
-Once control is returns back to the guest after hypervisor has serviced the
+Once control returns back to the guest after hypervisor has serviced the
 'HVCS' instruction the return value of the hcall is available in *r3* and any
 out values are returned in registers *r4-r12*. Again like in case of in-arguments,
 any out values stored in a memory buffer will be in Big-endian byte order.
@@ -147,7 +147,7 @@ corresponding opcode values please look into the arch specific header [4]_:
 | Out: *numBytesRead*
 | Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_Hardware*
 
-Given a DRC Index of an NVDIMM, read N-bytes from the the metadata area
+Given a DRC Index of an NVDIMM, read N-bytes from the metadata area
 associated with it, at a specified offset and copy it to provided buffer.
 The metadata area stores configuration information such as label information,
 bad-blocks etc. The metadata area is located out-of-band of NVDIMM storage

diff --git a/Documentation/powerpc/transactional_memory.rst b/Documentation/powerpc/transactional_memory.rst
index b5b09bf..040a206 100644 (file)
--- a/Documentation/powerpc/transactional_memory.rst
+++ b/Documentation/powerpc/transactional_memory.rst
@@ -189,7 +189,7 @@ kernel aborted a transaction:
  ====================== ================================
 
 These can be checked by the user program's abort handler as TEXASR[0:7].  If
-bit 7 is set, it indicates that the error is consider persistent.  For example
+bit 7 is set, it indicates that the error is considered persistent.  For example
 a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.
 
 GDB
@@ -271,4 +271,4 @@ with these lines:
 
 hrfid and mtmsrd have the same quirk.
 
-The Linux kernel uses this quirk in it's early exception handling.
+The Linux kernel uses this quirk in its early exception handling.