--- /dev/null
+/*
+ * arch/arm/boot/dts/amlogic/mesontl1_t309-panel.dtsi
+ *
+ * Copyright (C) 2016 Amlogic, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+/ {
+ lcd {
+ compatible = "amlogic, lcd-tl1";
+ status = "okay";
+ mode = "tv";
+ fr_auto_policy = <0>; /* 0=disable, 1=60/50hz, 2=60/50/48hz */
+ key_valid = <0>;
+ clocks = <&clkc CLKID_VCLK2_ENCL
+ &clkc CLKID_VCLK2_VENCL
+ &clkc CLKID_TCON
+ &clkc CLKID_FCLK_DIV5
+ &clkc CLKID_TCON_PLL_COMP>;
+ clock-names = "encl_top_gate",
+ "encl_int_gate",
+ "tcon_gate",
+ "fclk_div5",
+ "clk_tcon";
+ reg = <0xff660000 0x8100
+ 0xff634400 0x300>;
+ interrupts = <0 3 1
+ 0 78 1
+ 0 88 1>;
+ interrupt-names = "vsync","vbyone","tcon";
+ pinctrl-names = "vbyone","vbyone_off","tcon","tcon_off";
+ pinctrl-0 = <&lcd_vbyone_pins>;
+ pinctrl-1 = <&lcd_vbyone_off_pins>;
+ pinctrl-2 = <&lcd_tcon_pins>;
+ pinctrl-3 = <&lcd_tcon_off_pins>;
+ pinctrl_version = <2>; /* for uboot */
+
+ /* power type:(0=cpu_gpio, 2=signal, 3=extern, 0xff=ending) */
+ /* power index:(gpios_index, or extern_index, 0xff=invalid) */
+ /* power value:(0=output low, 1=output high, 2=input) */
+ /* power delay:(unit in ms) */
+ lcd_cpu-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH
+ &gpio GPIOH_2 GPIO_ACTIVE_HIGH
+ &gpio GPIOH_3 GPIO_ACTIVE_HIGH
+ &gpio GPIOH_8 GPIO_ACTIVE_HIGH
+ &gpio GPIOH_14 GPIO_ACTIVE_HIGH>;
+ lcd_cpu_gpio_names = "GPIOAO_4","GPIOH_2","GPIOH_3",
+ "GPIOH_8","GPIOH_14";
+
+ lvds_0{
+ model_name = "1080p-vfreq";
+ interface = "lvds"; /*lcd_interface(lvds, vbyone)*/
+ basic_setting = <
+ 1920 1080 /*h_active, v_active*/
+ 2200 1125 /*h_period, v_period*/
+ 8 /*lcd_bits */
+ 16 9>; /*screen_widht, screen_height*/
+ range_setting = <
+ 2060 2650 /*h_period_min,max*/
+ 1100 1480 /*v_period_min,max*/
+ 120000000 160000000>; /*pclk_min,max*/
+ lcd_timing = <
+ 44 148 0 /*hs_width, hs_bp, hs_pol*/
+ 5 30 0>; /*vs_width, vs_bp, vs_pol*/
+ clk_attr = <
+ 2 /*fr_adj_type
+ *(0=clk, 1=htotal, 2=vtotal, 3=auto_range,
+ * 4=hdmi_mode)
+ */
+ 0 /*clk_ss_level*/
+ 1 /*clk_auto_generate*/
+ 0>; /*pixel_clk(unit in Hz)*/
+ lvds_attr = <
+ 1 /*lvds_repack*/
+ 1 /*dual_port*/
+ 0 /*pn_swap*/
+ 0 /*port_swap*/
+ 0>; /*lane_reverse*/
+ phy_attr=<
+ 3 0 /*vswing_level, preem_level*/
+ 0 0>; /*clk vswing_level, preem_level*/
+
+ /* power step: type, index, value, delay(ms) */
+ power_on_step = <
+ 0 0 1 20 /*panel power on*/
+ 2 0 0 0 /*signal enable*/
+ 0xff 0 0 0>; /*ending*/
+ power_off_step = <
+ 2 0 0 10 /*signal disable*/
+ 0 0 0 100 /*panel power off*/
+ 0xff 0 0 0>; /*ending*/
+ backlight_index = <0>;
+ };
+
+ lvds_1{
+ model_name = "1080p-hfreq_hdmi";
+ interface = "lvds"; /*lcd_interface(lvds, vbyone)*/
+ basic_setting = <
+ 1920 1080 /*h_active, v_active*/
+ 2200 1125 /*h_period, v_period*/
+ 8 /*lcd_bits*/
+ 16 9>; /*screen_widht, screen_height*/
+ range_setting = <
+ 2080 2720 /*h_period min, max*/
+ 1100 1380 /*v_period min, max*/
+ 133940000 156000000>; /*pclk_min, max*/
+ lcd_timing = <
+ 44 148 0 /*hs_width, hs_bp, hs_pol*/
+ 5 30 0>; /*vs_width, vs_bp, vs_pol*/
+ clk_attr = <
+ 4 /*fr_adj_type
+ *(0=clk, 1=htotal, 2=vtotal, 3=auto_range,
+ * 4=hdmi_mode)
+ */
+ 0 /*clk_ss_level */
+ 1 /*clk_auto_generate*/
+ 0>; /*pixel_clk(unit in Hz)*/
+ lvds_attr = <
+ 1 /*lvds_repack*/
+ 1 /*dual_port*/
+ 0 /*pn_swap*/
+ 0 /*port_swap*/
+ 0>; /*lane_reverse*/
+ phy_attr=<
+ 3 0 /*vswing_level, preem_level*/
+ 0 0>; /*clk vswing_level, preem_level*/
+
+ /* power step: type, index, value, delay(ms) */
+ power_on_step = <
+ 0 0 1 20 /*panel power on*/
+ 2 0 0 0 /*signal enable*/
+ 0xff 0 0 0>; /*ending*/
+ power_off_step = <
+ 2 0 0 10 /*signal disable*/
+ 0 0 0 100 /*panel power off*/
+ 0xff 0 0 0>; /*ending*/
+ backlight_index = <0>;
+ };
+ lvds_2{
+ model_name = "768p-vfreq";
+ interface = "lvds"; /*lcd_interface(lvds, vbyone)*/
+ basic_setting = <
+ 1366 768 /*h_active, v_active*/
+ 1560 806 /*h_period, v_period*/
+ 8 /*lcd_bits*/
+ 16 9>; /*screen_widht, screen_height*/
+ range_setting = <
+ 1460 2000 /*h_period_min, max */
+ 784 1015 /*v_period_min, max */
+ 50000000 85000000>; /*pclk_min, max*/
+ lcd_timing = <
+ 56 64 0 /*hs_width, hs_bp, hs_pol*/
+ 3 28 0>; /*vs_width, vs_bp, vs_pol*/
+ clk_attr = <
+ 2 /*fr_adj_type
+ *(0=clk, 1=htotal, 2=vtotal, 3=auto_range,
+ * 4=hdmi_mode)
+ */
+ 0 /*clk_ss_level*/
+ 1 /*clk_auto_generate*/
+ 0>; /*pixel_clk(unit in Hz)*/
+ lvds_attr = <
+ 1 /*lvds_repack*/
+ 0 /*dual_port*/
+ 0 /*pn_swap*/
+ 0 /*port_swap*/
+ 0>; /*lane_reverse*/
+ phy_attr=<
+ 3 0 /*vswing_level, preem_level*/
+ 0 0>; /*clk vswing_level, preem_level*/
+
+ /* power step: type, index, value, delay(ms) */
+ power_on_step = <
+ 0 0 1 20 /*panel power on*/
+ 2 0 0 0 /*signal enable*/
+ 0xff 0 0 0>; /*ending*/
+ power_off_step = <
+ 2 0 0 10 /*signal disable*/
+ 0 0 0 100 /*panel power off*/
+ 0xff 0 0 0>; /*ending*/
+ backlight_index = <0>;
+ };
+ p2p{
+ model_name = "p2p_ceds";
+ interface = "p2p"; /*lcd_interface
+ *(lvds, vbyone, mlvds, p2p)
+ */
+ basic_setting = <
+ 3840 2160 /*h_active, v_active*/
+ 5000 2250 /*h_period, v_period*/
+ 10 /*lcd_bits */
+ 16 9>; /*screen_widht, screen_height*/
+ range_setting = <
+ 4240 5100 /*h_period_min, max*/
+ 2200 2760 /*v_period_min, max*/
+ 480000000 624000000>; /*pclk_min, max*/
+ lcd_timing = <
+ 16 29 0 /*hs_width, hs_bp, hs_pol*/
+ 6 65 0>; /*vs_width, vs_bp, vs_pol*/
+ clk_attr = <
+ 2 /*fr_adj_type
+ *(0=clk, 1=htotal, 2=vtotal, 3=auto_range,
+ * 4=hdmi_mode)
+ */
+ 0 /*clk_ss_level*/
+ 1 /*clk_auto_generate*/
+ 0>; /*pixel_clk(unit in Hz)*/
+ p2p_attr = <
+ 1 /*lvds_repack*/
+ 1 /*dual_port*/
+ 0 /*pn_swap*/
+ 0 /*port_swap*/
+ 0>; /*lane_reverse*/
+ phy_attr=<
+ 3 0 /*vswing_level, preem_level*/>;
+
+ /* power step: type, index, value, delay(ms) */
+ power_on_step = <
+ 0 0 1 20 /*panel power on*/
+ 2 0 0 10 /*signal enable*/
+ 0xff 0 0 0>; /*ending*/
+ power_off_step = <
+ 2 0 0 10 /*signal disable*/
+ 0 0 0 100 /*panel power off*/
+ 0xff 0 0 0>; /*ending*/
+ backlight_index = <0xff>;
+ };
+ };
+
+ lcd_extern{
+ compatible = "amlogic, lcd_extern";
+ status = "okay";
+ key_valid = <0>;
+ i2c_bus = "i2c_bus_1";
+
+ extern_0{
+ index = <0>;
+ extern_name = "ext_default";
+ status = "disabled";
+ type = <0>; /*0=i2c, 1=spi, 2=mipi*/
+ i2c_address = <0x1c>; /*7bit i2c_addr*/
+ i2c_address2 = <0xff>;
+ cmd_size = <0xff>; /*dynamic cmd_size*/
+
+ /* init on/off:
+ * fixed cmd_size: (type, value...);
+ * cmd_size include all data.
+ * dynamic cmd_size: (type, cmd_size, value...);
+ * cmd_size include value.
+ */
+ /* type: 0x00=cmd with delay(bit[3:0]=1 for address2),
+ * 0xc0=cmd(bit[3:0]=1 for address2),
+ * 0xf0=gpio,
+ * 0xfd=delay,
+ * 0xff=ending
+ */
+ /* value: i2c or spi cmd, or gpio index & level */
+ /* delay: unit ms */
+ init_on = <
+ 0xc0 7 0x20 0x01 0x02 0x00 0x40 0xFF 0x00
+ 0xc0 7 0x80 0x02 0x00 0x40 0x62 0x51 0x73
+ 0xc0 7 0x61 0x06 0x00 0x00 0x00 0x00 0x00
+ 0xc0 7 0xC1 0x05 0x0F 0x00 0x08 0x70 0x00
+ 0xc0 7 0x13 0x01 0x00 0x00 0x00 0x00 0x00
+ 0xc0 7 0x3D 0x02 0x01 0x00 0x00 0x00 0x00
+ 0xc0 7 0xED 0x0D 0x01 0x00 0x00 0x00 0x00
+ 0xc0 7 0x23 0x02 0x00 0x00 0x00 0x00 0x00
+ 0xfd 1 10 /* delay 10ms */
+ 0xff 0>; /*ending*/
+ init_off = <0xff 0>; /*ending*/
+ };
+ extern_1{
+ index = <1>;
+ extern_name = "i2c_T5800Q";
+ status = "disabled";
+ type = <0>; /* 0=i2c, 1=spi, 2=mipi */
+ i2c_address = <0x1c>; /* 7bit i2c address */
+ };
+ extern_2{
+ index = <2>;
+ extern_name = "i2c_ANX6862_7911";
+ status = "okay";
+ type = <0>; /* 0=i2c, 1=spi, 2=mipi */
+ i2c_address = <0x20>; /* 7bit i2c address */
+ i2c_address2 = <0x74>; /* 7bit i2c address */
+ cmd_size = <0xff>;
+
+ init_on = <
+ 0xc0 2 0x01 0x2b
+ 0xc0 2 0x02 0x05
+ 0xc0 2 0x03 0x00
+ 0xc0 2 0x04 0x00
+ 0xc0 2 0x05 0x0c
+ 0xc0 2 0x06 0x04
+ 0xc0 2 0x07 0x21
+ 0xc0 2 0x08 0x0f
+ 0xc0 2 0x09 0x04
+ 0xc0 2 0x0a 0x00
+ 0xc0 2 0x0b 0x04
+ 0xc0 2 0xff 0x00
+ 0xfd 1 100 /* delay 100ms */
+
+ 0xc1 2 0x01 0xca
+ 0xc1 2 0x02 0x3b
+ 0xc1 2 0x03 0x33
+ 0xc1 2 0x04 0x05
+ 0xc1 2 0x05 0x2c
+ 0xc1 2 0x06 0xf2
+ 0xc1 2 0x07 0x9c
+ 0xc1 2 0x08 0x1b
+ 0xc1 2 0x09 0x82
+ 0xc1 2 0x0a 0x3d
+ 0xc1 2 0x0b 0x20
+ 0xc1 2 0x0c 0x11
+ 0xc1 2 0x0d 0xc4
+ 0xc1 2 0x0e 0x1a
+ 0xc1 2 0x0f 0x31
+ 0xc1 2 0x10 0x4c
+ 0xc1 2 0x11 0x12
+ 0xc1 2 0x12 0x90
+ 0xc1 2 0x13 0xf7
+ 0xc1 2 0x14 0x0c
+ 0xc1 2 0x15 0x20
+ 0xc1 2 0x16 0x13
+ 0xff 0>; /*ending*/
+ init_off = <0xff 0>; /*ending*/
+ };
+ };
+
+ backlight{
+ compatible = "amlogic, backlight-tl1";
+ status = "okay";
+ key_valid = <0>;
+ pinctrl-names = "pwm_on","pwm_vs_on",
+ "pwm_combo_0_1_on",
+ "pwm_combo_0_vs_1_on",
+ "pwm_combo_0_1_vs_on",
+ "pwm_off",
+ "pwm_combo_off";
+ pinctrl-0 = <&pwm_c_pins3>;
+ pinctrl-1 = <&bl_pwm_vs_on_pins>;
+ pinctrl-2 = <&pwm_c_pins3 &pwm_d_pins2>;
+ pinctrl-3 = <&bl_pwm_combo_0_vs_on_pins &pwm_d_pins2>;
+ pinctrl-4 = <&pwm_c_pins3 &bl_pwm_combo_1_vs_on_pins>;
+ pinctrl-5 = <&bl_pwm_off_pins>;
+ pinctrl-6 = <&bl_pwm_combo_off_pins>;
+ pinctrl_version = <2>; /* for uboot */
+ interrupts = <0 3 1>;
+ interrupt-names = "ldim_vsync";
+ bl_pwm_config = <&bl_pwm_conf>;
+
+ /* pwm port: PWM_A, PWM_B, PWM_C, PWM_D, PWM_E, PWM_F, PWM_VS*/
+ /* power index:(point gpios_index, 0xff=invalid) */
+ /* power value:(0=output low, 1=output high, 2=input) */
+ /* power delay:(unit in ms) */
+ bl-gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH
+ &gpio GPIOZ_5 GPIO_ACTIVE_HIGH
+ &gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
+ bl_gpio_names = "GPIOAO_11","GPIOZ_5","GPIOZ_6";
+
+ backlight_0{
+ index = <0>;
+ bl_name = "backlight_pwm";
+ bl_level_default_uboot_kernel = <100 100>;
+ bl_level_attr = <255 10 /*max, min*/
+ 128 128>; /*mid, mid_mapping*/
+ bl_ctrl_method = <1>; /*1=pwm,2=pwm_combo,3=ldim*/
+ bl_power_attr = <0 /*en_gpio_index*/
+ 1 0 /*on_value, off_value*/
+ 200 200>; /*on_delay(ms), off_delay(ms)*/
+ bl_pwm_port = "PWM_C";
+ bl_pwm_attr = <1 /*pwm_method(0=negative, 1=positvie)*/
+ 180 /*pwm_freq(pwm:Hz, pwm_vs:multiple of vs)*/
+ 100 25>; /*duty_max(%), duty_min(%)*/
+ bl_pwm_power = <1 0 /*pwm_gpio_index, pwm_gpio_off*/
+ 10 10>; /*pwm_on_delay(ms), pwm_off_delay(ms)*/
+ bl_pwm_en_sequence_reverse = <0>; /* 1 for reverse */
+ };
+ backlight_1{
+ index = <1>;
+ bl_name = "backlight_pwm_vs";
+ bl_level_default_uboot_kernel = <100 100>;
+ bl_level_attr = <255 10 /*max, min*/
+ 128 128>; /*mid, mid_mapping*/
+ bl_ctrl_method = <1>; /*1=pwm,2=pwm_combo,3=ldim*/
+ bl_power_attr = <0 /*en_gpio_index*/
+ 1 0 /*on_value, off_value*/
+ 200 200>; /* on_delay(ms), off_delay(ms)*/
+ bl_pwm_port = "PWM_VS";
+ bl_pwm_attr = <1 /*pwm_method(0=negative, 1=positvie)*/
+ 2 /*pwm_freq(pwm:Hz, pwm_vs:multiple of vs)*/
+ 100 25>; /*duty_max(%), duty_min(%)*/
+ bl_pwm_power = <1 0 /*pwm_gpio_index, pwm_gpio_off*/
+ 10 10>; /*pwm_on_delay(ms), pwm_off_delay(ms)*/
+ bl_pwm_en_sequence_reverse = <0>; /* 1 for reverse */
+ };
+ backlight_2{
+ index = <2>;
+ bl_name = "backlight_pwm_combo";
+ bl_level_default_uboot_kernel = <31 100>;
+ bl_level_attr = <255 10 /*max, min*/
+ 128 128>; /*mid, mid_mapping*/
+ bl_ctrl_method = <2>; /*1=pwm,2=pwm_combo,3=ldim*/
+ bl_power_attr = <0 /*en_gpio_index*/
+ 1 0 /*on_value, off_value*/
+ 410 110>; /*on_delay(ms), off_delay(ms)*/
+ bl_pwm_combo_level_mapping = <255 10 /*pwm_0 range*/
+ 0 0>; /*pwm_1 range*/
+ bl_pwm_combo_port = "PWM_B","PWM_C";
+ bl_pwm_combo_attr = <1 /*pwm0 method*/
+ 180 /*pwm0 freq(pwm:Hz, pwm_vs:multiple of vs)*/
+ 100 25 /*pwm0 duty_max(%), duty_min(%)*/
+ 1 /*pwm1 method*/
+ 18000 /*pwm1 freq(pwm:Hz, pwm_vs:multi of vs)*/
+ 80 80>; /*pwm1 duty_max(%), duty_min(%)*/
+ bl_pwm_combo_power = <1 0 /*pwm0 gpio_index, gpio_off*/
+ 2 0 /*pwm1 gpio_index, gpio_off*/
+ 10 10>; /*pwm_on_delay(ms), pwm_off_delay(ms)*/
+ };
+ };
+
+ bl_pwm_conf:bl_pwm_conf{
+ pwm_channel_0 {
+ pwm_port_index = <2>;
+ pwms = <&pwm_cd MESON_PWM_0 30040 0>;
+ };
+ pwm_channel_1 {
+ pwm_port_index = <3>;
+ pwms = <&pwm_cd MESON_PWM_1 30040 0>;
+ };
+ };
+
+}; /* end of / */
projects / platform / kernel / linux-amlogic.git / commitdiff