regulator: dt-bindings: maxim,max77686: Convert to dtschema

Convert the regulators of Maxim MAX77686 PMIC to DT schema format.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211125074826.7947-2-krzysztof.kozlowski@canonical.com

diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt
deleted file mode 100644 (file)
index ff3d2de..0000000
--- a/Documentation/devicetree/bindings/regulator/max77686.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-Binding for Maxim MAX77686 regulators
-
-This is a part of the device tree bindings of MAX77686 multi-function device.
-More information can be found in ../mfd/max77686.txt file.
-
-The MAX77686 PMIC has 9 high-efficiency Buck and 26 Low-DropOut (LDO)
-regulators that can be controlled over I2C.
-
-Following properties should be present in main device node of the MFD chip.
-
-Optional node:
-- voltage-regulators : The regulators of max77686 have to be instantiated
-  under subnode named "voltage-regulators" using the following format.
-
-       regulator_name {
-               regulator-compatible = LDOn/BUCKn
-               standard regulator constraints....
-       };
-       refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-  The regulator node's name should be initialized with a string
-to get matched with their hardware counterparts as follow:
-
-       -LDOn   :       for LDOs, where n can lie in range 1 to 26.
-                       example: LDO1, LDO2, LDO26.
-       -BUCKn  :       for BUCKs, where n can lie in range 1 to 9.
-                       example: BUCK1, BUCK5, BUCK9.
-
-  Regulators which can be turned off during system suspend:
-       -LDOn   :       2, 6-8, 10-12, 14-16,
-       -BUCKn  :       1-4.
-  Use standard regulator bindings for it ('regulator-off-in-suspend').
-
-  LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
-  control. To turn this feature on this property must be added to the regulator
-  sub-node:
-       - maxim,ena-gpios :     one GPIO specifier enable control (the gpio
-                               flags are actually ignored and always
-                               ACTIVE_HIGH is used)
-
-Example:
-
-       max77686: pmic@9 {
-               compatible = "maxim,max77686";
-               interrupt-parent = <&wakeup_eint>;
-               interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-               reg = <0x09>;
-
-               voltage-regulators {
-                       ldo11_reg: LDO11 {
-                               regulator-name = "vdd_ldo11";
-                               regulator-min-microvolt = <1900000>;
-                               regulator-max-microvolt = <1900000>;
-                               regulator-always-on;
-                       };
-
-                       buck1_reg: BUCK1 {
-                               regulator-name = "vdd_mif";
-                               regulator-min-microvolt = <950000>;
-                               regulator-max-microvolt = <1300000>;
-                               regulator-always-on;
-                               regulator-boot-on;
-                       };
-
-                       buck9_reg: BUCK9 {
-                               regulator-name = "CAM_ISP_CORE_1.2V";
-                               regulator-min-microvolt = <1000000>;
-                               regulator-max-microvolt = <1200000>;
-                               maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
-                       };
-       };

diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml
new file mode 100644 (file)
index 0000000..bb64b67
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77686 Power Management IC regulators
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77686 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77686 provides high-efficiency Buck and 26 Low-DropOut (LDO)
+  regulators.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77686.yaml for
+  additional information and example.
+
+patternProperties:
+  # 26 LDOs
+  "^LDO([1-9]|1[0-9]|2[3-6])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single LDO regulator.
+      Regulators which can be turned off during system suspend:
+        LDO2, LDO6-8, LDO10-12, LDO14-16
+
+    required:
+      - regulator-name
+
+  # LDO20-LDO22 with maxim,ena-gpios
+  "^LDO2[0-2]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single LDO regulator.
+
+    properties:
+      maxim,ena-gpios:
+        maxItems: 1
+        description: |
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+    required:
+      - regulator-name
+
+  # 9 bucks
+  "^BUCK[1-7]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single BUCK regulator.
+      Regulators which can be turned off during system suspend:
+      BUCK[1-4]
+
+    required:
+      - regulator-name
+
+  "^BUCK[89]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single BUCK regulator.
+
+    properties:
+      maxim,ena-gpios:
+        maxItems: 1
+        description: |
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false

diff --git a/MAINTAINERS b/MAINTAINERS
index c3ebc41..5cd3a2a 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11595,6 +11595,7 @@ M:      Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:     linux-kernel@vger.kernel.org
 S:     Supported
 F:     Documentation/devicetree/bindings/*/max77686.txt
+F:     Documentation/devicetree/bindings/*/maxim,max77686.yaml
 F:     Documentation/devicetree/bindings/clock/maxim,max77686.txt
 F:     Documentation/devicetree/bindings/mfd/max14577.txt
 F:     Documentation/devicetree/bindings/mfd/max77693.txt