arm64: dts: renesas: salvator-common: Add BD9571 PMIC

Add a device node for the ROHM BD9571MWV PMIC.

This was based on the example in the DT binding documentation, but using
IRQ0 instead of a GPIO interrupt, as that matches the schematics, and
because INTC-EX is a simpler block.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 24a32c6..b9505a6 100644 (file)
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -355,6 +355,30 @@
 
 &i2c_dvfs {
        status = "okay";
+
+       pmic: pmic@30 {
+               pinctrl-0 = <&irq0_pins>;
+               pinctrl-names = "default";
+
+               compatible = "rohm,bd9571mwv";
+               reg = <0x30>;
+               interrupt-parent = <&intc_ex>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-controller;
+               #interrupt-cells = <2>;
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               regulators {
+                       dvfs: dvfs {
+                               regulator-name = "dvfs";
+                               regulator-min-microvolt = <750000>;
+                               regulator-max-microvolt = <1030000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+               };
+       };
 };
 
 &ohci0 {
@@ -410,6 +434,11 @@
                function = "i2c2";
        };
 
+       irq0_pins: irq0 {
+               groups = "intc_ex_irq0";
+               function = "intc_ex";
+       };
+
        pwm1_pins: pwm1 {
                groups = "pwm1_a";
                function = "pwm1";