int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable);
int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable);
int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr);
- void (*adap_configured)(struct cec_adapter *adap, bool configured);
+ void (*adap_unconfigured)(struct cec_adapter *adap);
int (*adap_transmit)(struct cec_adapter *adap, u8 attempts,
u32 signal_free_time, struct cec_msg *msg);
+ void (*adap_nb_transmit_canceled)(struct cec_adapter *adap,
+ const struct cec_msg *msg);
void (*adap_status)(struct cec_adapter *adap, struct seq_file *file);
void (*adap_free)(struct cec_adapter *adap);
...
};
-The seven low-level ops deal with various aspects of controlling the CEC adapter
-hardware:
+These low-level ops deal with various aspects of controlling the CEC adapter
+hardware. They are all called with the mutex adap->lock held.
To enable/disable the hardware::
Note that adap_log_addr must return 0 if logical_addr is CEC_LOG_ADDR_INVALID.
-Called when the adapter is fully configured or unconfigured::
+Called when the adapter is unconfigured::
- void (*adap_configured)(struct cec_adapter *adap, bool configured);
+ void (*adap_unconfigured)(struct cec_adapter *adap);
-If configured == true, then the adapter is fully configured, i.e. all logical
-addresses have been successfully claimed. If configured == false, then the
-adapter is unconfigured. If the driver has to take specific actions after
-(un)configuration, then that can be done through this optional callback.
+The adapter is unconfigured. If the driver has to take specific actions after
+unconfiguration, then that can be done through this optional callback.
To transmit a new message::
microseconds (one data bit period is 2.4 ms).
+To pass on the result of a canceled non-blocking transmit::
+
+ void (*adap_nb_transmit_canceled)(struct cec_adapter *adap,
+ const struct cec_msg *msg);
+
+This optional callback can be used to obtain the result of a canceled
+non-blocking transmit with sequence number msg->sequence. This is
+called if the transmit was aborted, the transmit timed out (i.e. the
+hardware never signaled that the transmit finished), or the transmit
+was successful, but the wait for the expected reply was either aborted
+or it timed out.
+
+
To log the current CEC hardware status::
void (*adap_status)(struct cec_adapter *adap, struct seq_file *file);
---------------------------------------
The low-level operations drive the hardware, the high-level operations are
-CEC protocol driven. The following high-level callbacks are available:
+CEC protocol driven. The high-level callbacks are called without the adap->lock
+mutex being held. The following high-level callbacks are available:
.. code-block:: none
...
/* High-level CEC message callback */
+ void (*configured)(struct cec_adapter *adap);
int (*received)(struct cec_adapter *adap, struct cec_msg *msg);
};
+Called when the adapter is configured::
+
+ void (*configured)(struct cec_adapter *adap);
+
+The adapter is fully configured, i.e. all logical addresses have been
+successfully claimed. If the driver has to take specific actions after
+configuration, then that can be done through this optional callback.
+
+
The received() callback allows the driver to optionally handle a newly
received CEC message::