}
}
+void pci_bridge_disable_base_limit(PCIDevice *dev)
+{
+ uint8_t *conf = dev->config;
+
+ pci_byte_test_and_set_mask(conf + PCI_IO_BASE,
+ PCI_IO_RANGE_MASK & 0xff);
+ pci_byte_test_and_clear_mask(conf + PCI_IO_LIMIT,
+ PCI_IO_RANGE_MASK & 0xff);
+ pci_word_test_and_set_mask(conf + PCI_MEMORY_BASE,
+ PCI_MEMORY_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_MEMORY_LIMIT,
+ PCI_MEMORY_RANGE_MASK & 0xffff);
+ pci_word_test_and_set_mask(conf + PCI_PREF_MEMORY_BASE,
+ PCI_PREF_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_LIMIT,
+ PCI_PREF_RANGE_MASK & 0xffff);
+ pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0);
+ pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0);
+}
+
/* reset bridge specific configuration registers */
void pci_bridge_reset_reg(PCIDevice *dev)
{
conf[PCI_SUBORDINATE_BUS] = 0;
conf[PCI_SEC_LATENCY_TIMER] = 0;
- conf[PCI_IO_BASE] = 0;
- conf[PCI_IO_LIMIT] = 0;
- pci_set_word(conf + PCI_MEMORY_BASE, 0);
- pci_set_word(conf + PCI_MEMORY_LIMIT, 0);
- pci_set_word(conf + PCI_PREF_MEMORY_BASE, 0);
- pci_set_word(conf + PCI_PREF_MEMORY_LIMIT, 0);
+ /*
+ * the default values for base/limit registers aren't specified
+ * in the PCI-to-PCI-bridge spec. So we don't thouch them here.
+ * Each implementation can override it.
+ * typical implementation does
+ * zero base/limit registers or
+ * disable forwarding: pci_bridge_disable_base_limit()
+ * If disable forwarding is wanted, call pci_bridge_disable_base_limit()
+ * after this function.
+ */
+ pci_byte_test_and_clear_mask(conf + PCI_IO_BASE,
+ PCI_IO_RANGE_MASK & 0xff);
+ pci_byte_test_and_clear_mask(conf + PCI_IO_LIMIT,
+ PCI_IO_RANGE_MASK & 0xff);
+ pci_word_test_and_clear_mask(conf + PCI_MEMORY_BASE,
+ PCI_MEMORY_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_MEMORY_LIMIT,
+ PCI_MEMORY_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_BASE,
+ PCI_PREF_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_LIMIT,
+ PCI_PREF_RANGE_MASK & 0xffff);
pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0);
pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0);