help
Enable S3C6410 CPU support
+config S3C64XX_DMA
+ bool "S3C64XX DMA"
+ select S3C_DMA
+
config S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_SDHCI_GPIO
bool
obj-n :=
obj- :=
+# Core files
+obj-y += cpu.o
+obj-y += clock.o
+obj-y += gpiolib.o
+
# Core support for S3C6400 system
obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
obj-y += irq.o
obj-y += irq-eint.o
+# CPU frequency scaling
+
+obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA) += dma.o
+
# Device setup
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
# PM
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_PM) += irq-pm.o
# Machine support
#include <mach/regs-sys.h>
#include <mach/regs-clock.h>
+#include <mach/pll.h>
+
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
/* table of supported CPUs */
-/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
#define s3c6400_map_io NULL
#define s3c6400_init NULL
#endif
-
-/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
#include <plat/iic.h>
#include <plat/fb.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
#include <plat/nand.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/iic.h>
#include <plat/fb.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
-#include <plat/s3c6400.h>
+#include <mach/s3c6400.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
-#include <plat/s3c6400.h>
+#include <mach/s3c6400.h>
void __init s3c6400_map_io(void)
{
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
void __init s3c6410_map_io(void)
{
Common clock support code for the S3C6400 that is shared
by other CPUs in the series, such as the S3C6410.
-config S3C64XX_DMA
- bool "S3C64XX DMA"
- select S3C_DMA
-
endif
obj-n := dummy.o
obj- :=
-# Core files
-obj-y += cpu.o
-obj-y += clock.o
-obj-y += gpiolib.o
-
# CPU support
obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o
obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o
-obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o
-
-# PM support
-
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM) += sleep.o
-
-# DMA support
-
-obj-$(CONFIG_S3C64XX_DMA) += dma.o
-
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
/* uart registration process */