spi-imx: Implements handling of the SPI_READY mode flag.

This patch implements consideration of the SPI_READY mode flag as
defined in spi.h. It extends the device tree bindings to support
the values defined by the reference manual for the DRCTL field.

Thus supporting edge-triggered and level-triggered bursts.

Signed-off-by: Leif Middelschulte <Leif.Middelschulte@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 8bc95e2..31b5b21 100644 (file)
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -23,6 +23,12 @@ See the clock consumer binding,
 Obsolete properties:
 - fsl,spi-num-chipselects : Contains the number of the chipselect
 
+Optional properties:
+- fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
+controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
+the SPI_READY mode-flag needs to be set too.
+Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
+
 Example:
 
 ecspi@70010000 {
@@ -35,4 +41,5 @@ ecspi@70010000 {
                   <&gpio3 25 0>; /* GPIO3_25 */
        dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
        dma-names = "rx", "tx";
+       fsl,spi-rdy-drctl = <1>;
 };

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 9a7c62f..b402530 100644 (file)
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -95,6 +95,7 @@ struct spi_imx_data {
        unsigned int spi_bus_clk;
 
        unsigned int bytes_per_word;
+       unsigned int spi_drctl;
 
        unsigned int count;
        void (*tx)(struct spi_imx_data *);
@@ -246,6 +247,7 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_CTRL_XCH            (1 <<  2)
 #define MX51_ECSPI_CTRL_SMC            (1 << 3)
 #define MX51_ECSPI_CTRL_MODE_MASK      (0xf << 4)
+#define MX51_ECSPI_CTRL_DRCTL(drctl)   ((drctl) << 16)
 #define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8
 #define MX51_ECSPI_CTRL_PREDIV_OFFSET  12
 #define MX51_ECSPI_CTRL_CS(cs)         ((cs) << 18)
@@ -355,6 +357,12 @@ static int mx51_ecspi_config(struct spi_device *spi,
         */
        ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
 
+       /*
+        * Enable SPI_RDY handling (falling edge/level triggered).
+        */
+       if (spi->mode & SPI_READY)
+               ctrl |= MX51_ECSPI_CTRL_DRCTL(spi_imx->spi_drctl);
+
        /* set clock speed */
        ctrl |= mx51_ecspi_clkdiv(spi_imx, config->speed_hz, &clk);
        spi_imx->spi_bus_clk = clk;
@@ -1173,7 +1181,7 @@ static int spi_imx_probe(struct platform_device *pdev)
        struct spi_master *master;
        struct spi_imx_data *spi_imx;
        struct resource *res;
-       int i, ret, irq;
+       int i, ret, irq, spi_drctl;
 
        if (!np && !mxc_platform_info) {
                dev_err(&pdev->dev, "can't get the platform data\n");
@@ -1181,6 +1189,12 @@ static int spi_imx_probe(struct platform_device *pdev)
        }
 
        master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data));
+       ret = of_property_read_u32(np, "fsl,spi-rdy-drctl", &spi_drctl);
+       if ((ret < 0) || (spi_drctl >= 0x3)) {
+               /* '11' is reserved */
+               spi_drctl = 0;
+       }
+
        if (!master)
                return -ENOMEM;
 
@@ -1216,7 +1230,9 @@ static int spi_imx_probe(struct platform_device *pdev)
        spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
        spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
        if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx))
-               spi_imx->bitbang.master->mode_bits |= SPI_LOOP;
+               spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY;
+
+       spi_imx->spi_drctl = spi_drctl;
 
        init_completion(&spi_imx->xfer_done);